diff options
Diffstat (limited to 'drivers/scsi')
-rw-r--r-- | drivers/scsi/Kconfig | 2 | ||||
-rw-r--r-- | drivers/scsi/advansys.c | 2 | ||||
-rw-r--r-- | drivers/scsi/hosts.c | 11 | ||||
-rw-r--r-- | drivers/scsi/hpsa.c | 2 | ||||
-rw-r--r-- | drivers/scsi/mpt3sas/Kconfig | 9 | ||||
-rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_scsih.c | 3 | ||||
-rw-r--r-- | drivers/scsi/mvsas/mv_init.c | 4 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_nx.c | 3 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/tcm_qla2xxx.c | 2 | ||||
-rw-r--r-- | drivers/scsi/scsi_debug.c | 9 | ||||
-rw-r--r-- | drivers/scsi/scsi_pm.c | 20 | ||||
-rw-r--r-- | drivers/scsi/scsi_scan.c | 9 | ||||
-rw-r--r-- | drivers/scsi/scsi_sysfs.c | 22 | ||||
-rw-r--r-- | drivers/scsi/sd.c | 69 | ||||
-rw-r--r-- | drivers/scsi/sd.h | 1 | ||||
-rw-r--r-- | drivers/scsi/ses.c | 30 | ||||
-rw-r--r-- | drivers/scsi/st.c | 5 |
17 files changed, 142 insertions, 61 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 5f692ae..64eed87 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -364,6 +364,7 @@ config SCSI_HPSA tristate "HP Smart Array SCSI driver" depends on PCI && SCSI select CHECK_SIGNATURE + select SCSI_SAS_ATTRS help This driver supports HP Smart Array Controllers (circa 2009). It is a SCSI alternative to the cciss driver, which is a block @@ -499,6 +500,7 @@ config SCSI_ADVANSYS tristate "AdvanSys SCSI support" depends on SCSI depends on ISA || EISA || PCI + depends on ISA_DMA_API || !ISA help This is a driver for all SCSI host adapters manufactured by AdvanSys. It is documented in the kernel source in diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index 519f9a4..febbd83 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -7803,7 +7803,7 @@ adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp, return ASC_BUSY; } scsiqp->sense_addr = cpu_to_le32(sense_addr); - scsiqp->sense_len = cpu_to_le32(SCSI_SENSE_BUFFERSIZE); + scsiqp->sense_len = SCSI_SENSE_BUFFERSIZE; /* Build ADV_SCSI_REQ_Q */ diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 323982f..82ac1cd 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -333,6 +333,17 @@ static void scsi_host_dev_release(struct device *dev) kfree(queuedata); } + if (shost->shost_state == SHOST_CREATED) { + /* + * Free the shost_dev device name here if scsi_host_alloc() + * and scsi_host_put() have been called but neither + * scsi_host_add() nor scsi_host_remove() has been called. + * This avoids that the memory allocated for the shost_dev + * name is leaked. + */ + kfree(dev_name(&shost->shost_dev)); + } + scsi_destroy_command_freelist(shost); if (shost_use_blk_mq(shost)) { if (shost->tag_set.tags) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 6a8f958..a386036 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -8671,7 +8671,7 @@ static void hpsa_disable_rld_caching(struct ctlr_info *h) if ((rc != 0) || (c->err_info->CommandStatus != 0)) goto errout; - if (*options && HPSA_DIAG_OPTS_DISABLE_RLD_CACHING) + if (*options & HPSA_DIAG_OPTS_DISABLE_RLD_CACHING) goto out; errout: diff --git a/drivers/scsi/mpt3sas/Kconfig b/drivers/scsi/mpt3sas/Kconfig index 2906146..b736dbc 100644 --- a/drivers/scsi/mpt3sas/Kconfig +++ b/drivers/scsi/mpt3sas/Kconfig @@ -71,3 +71,12 @@ config SCSI_MPT3SAS_MAX_SGE MAX_PHYS_SEGMENTS in most kernels. However in SuSE kernels this can be 256. However, it may decreased down to 16. Decreasing this parameter will reduce memory requirements on a per controller instance. + +config SCSI_MPT2SAS + tristate "Legacy MPT2SAS config option" + default n + select SCSI_MPT3SAS + depends on PCI && SCSI + ---help--- + Dummy config option for backwards compatiblity: configure the MPT3SAS + driver instead. diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index d95206b..9ab77b0 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -3905,8 +3905,7 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd) * We do not expose raid functionality to upper layer for warpdrive. */ if (!ioc->is_warpdrive && !scsih_is_raid(&scmd->device->sdev_gendev) - && (sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) && - scmd->cmd_len != 32) + && sas_is_tlr_enabled(scmd->device) && scmd->cmd_len != 32) mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON; smid = mpt3sas_base_get_smid_scsiio(ioc, ioc->scsi_io_cb_idx, scmd); diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c index 90fdf0e..675e7fa 100644 --- a/drivers/scsi/mvsas/mv_init.c +++ b/drivers/scsi/mvsas/mv_init.c @@ -758,7 +758,7 @@ mvs_store_interrupt_coalescing(struct device *cdev, struct device_attribute *attr, const char *buffer, size_t size) { - int val = 0; + unsigned int val = 0; struct mvs_info *mvi = NULL; struct Scsi_Host *shost = class_to_shost(cdev); struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost); @@ -766,7 +766,7 @@ mvs_store_interrupt_coalescing(struct device *cdev, if (buffer == NULL) return size; - if (sscanf(buffer, "%d", &val) != 1) + if (sscanf(buffer, "%u", &val) != 1) return -EINVAL; if (val >= 0x10000) { diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index eb0cc54..b6b4cfd 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -433,7 +433,7 @@ qla82xx_pci_get_crb_addr_2M(struct qla_hw_data *ha, ulong off_in, if (off_in < QLA82XX_PCI_CRBSPACE) return -1; - *off_out = (void __iomem *)(off_in - QLA82XX_PCI_CRBSPACE); + off_in -= QLA82XX_PCI_CRBSPACE; /* Try direct map */ m = &crb_128M_2M_map[CRB_BLK(off_in)].sub_block[CRB_SUBBLK(off_in)]; @@ -443,6 +443,7 @@ qla82xx_pci_get_crb_addr_2M(struct qla_hw_data *ha, ulong off_in, return 0; } /* Not in direct map, use crb window */ + *off_out = (void __iomem *)off_in; return 1; } diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index 3ba2e95..81af294f 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -902,7 +902,7 @@ static ssize_t tcm_qla2xxx_tpg_fabric_prot_type_show(struct config_item *item, return sprintf(page, "%d\n", tpg->tpg_attrib.fabric_prot_type); } -CONFIGFS_ATTR_WO(tcm_qla2xxx_tpg_, enable); +CONFIGFS_ATTR(tcm_qla2xxx_tpg_, enable); CONFIGFS_ATTR_RO(tcm_qla2xxx_tpg_, dynamic_sessions); CONFIGFS_ATTR(tcm_qla2xxx_tpg_, fabric_prot_type); diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index dfcc45b..d09d602 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -465,8 +465,9 @@ static const struct opcode_info_t opcode_info_arr[SDEB_I_LAST_ELEMENT + 1] = { 0} }, {0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* MAINT OUT */ {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} }, - {0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* VERIFY */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} }, + {0, 0x2f, 0, F_D_OUT_MAYBE | FF_DIRECT_IO, NULL, NULL, /* VERIFY(10) */ + {10, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc7, + 0, 0, 0, 0, 0, 0} }, {1, 0x7f, 0x9, F_SA_HIGH | F_D_IN | FF_DIRECT_IO, resp_read_dt0, vl_iarr, {32, 0xc7, 0, 0, 0, 0, 0x1f, 0x18, 0x0, 0x9, 0xfe, 0, 0xff, 0xff, 0xff, 0xff} },/* VARIABLE LENGTH, READ(32) */ @@ -477,8 +478,8 @@ static const struct opcode_info_t opcode_info_arr[SDEB_I_LAST_ELEMENT + 1] = { {10, 0x13, 0xff, 0xff, 0, 0, 0, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0, 0} }, /* 20 */ - {0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* ALLOW REMOVAL */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} }, + {0, 0x1e, 0, 0, NULL, NULL, /* ALLOW REMOVAL */ + {6, 0, 0, 0, 0x3, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} }, {0, 0x1, 0, 0, resp_start_stop, NULL, /* REWIND ?? */ {6, 0x1, 0, 0, 0, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} }, {0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* ATA_PT */ diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c index e4b7998..459abe1 100644 --- a/drivers/scsi/scsi_pm.c +++ b/drivers/scsi/scsi_pm.c @@ -219,13 +219,13 @@ static int sdev_runtime_suspend(struct device *dev) struct scsi_device *sdev = to_scsi_device(dev); int err = 0; - if (pm && pm->runtime_suspend) { - err = blk_pre_runtime_suspend(sdev->request_queue); - if (err) - return err; + err = blk_pre_runtime_suspend(sdev->request_queue); + if (err) + return err; + if (pm && pm->runtime_suspend) err = pm->runtime_suspend(dev); - blk_post_runtime_suspend(sdev->request_queue, err); - } + blk_post_runtime_suspend(sdev->request_queue, err); + return err; } @@ -248,11 +248,11 @@ static int sdev_runtime_resume(struct device *dev) const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; int err = 0; - if (pm && pm->runtime_resume) { - blk_pre_runtime_resume(sdev->request_queue); + blk_pre_runtime_resume(sdev->request_queue); + if (pm && pm->runtime_resume) err = pm->runtime_resume(dev); - blk_post_runtime_resume(sdev->request_queue, err); - } + blk_post_runtime_resume(sdev->request_queue, err); + return err; } diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 8324539..054923e 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -701,9 +701,12 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result, * strings. */ if (sdev->inquiry_len < 36) { - sdev_printk(KERN_INFO, sdev, - "scsi scan: INQUIRY result too short (%d)," - " using 36\n", sdev->inquiry_len); + if (!sdev->host->short_inquiry) { + shost_printk(KERN_INFO, sdev->host, + "scsi scan: INQUIRY result too short (%d)," + " using 36\n", sdev->inquiry_len); + sdev->host->short_inquiry = 1; + } sdev->inquiry_len = 36; } diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index 8d23122..21930c9 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -1102,6 +1102,14 @@ void __scsi_remove_device(struct scsi_device *sdev) { struct device *dev = &sdev->sdev_gendev; + /* + * This cleanup path is not reentrant and while it is impossible + * to get a new reference with scsi_device_get() someone can still + * hold a previously acquired one. + */ + if (sdev->sdev_state == SDEV_DEL) + return; + if (sdev->is_visible) { if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0) return; @@ -1110,7 +1118,9 @@ void __scsi_remove_device(struct scsi_device *sdev) device_unregister(&sdev->sdev_dev); transport_remove_device(dev); scsi_dh_remove_device(sdev); - } + device_del(dev); + } else + put_device(&sdev->sdev_dev); /* * Stop accepting new requests and wait until all queuecommand() and @@ -1121,16 +1131,6 @@ void __scsi_remove_device(struct scsi_device *sdev) blk_cleanup_queue(sdev->request_queue); cancel_work_sync(&sdev->requeue_work); - /* - * Remove the device after blk_cleanup_queue() has been called such - * a possible bdi_register() call with the same name occurs after - * blk_cleanup_queue() has called bdi_destroy(). - */ - if (sdev->is_visible) - device_del(dev); - else - put_device(&sdev->sdev_dev); - if (sdev->host->hostt->slave_destroy) sdev->host->hostt->slave_destroy(sdev); transport_destroy_device(dev); diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 5451980..3d22fc3 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -638,11 +638,24 @@ static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode) unsigned int max_blocks = 0; q->limits.discard_zeroes_data = 0; - q->limits.discard_alignment = sdkp->unmap_alignment * - logical_block_size; - q->limits.discard_granularity = - max(sdkp->physical_block_size, - sdkp->unmap_granularity * logical_block_size); + + /* + * When LBPRZ is reported, discard alignment and granularity + * must be fixed to the logical block size. Otherwise the block + * layer will drop misaligned portions of the request which can + * lead to data corruption. If LBPRZ is not set, we honor the + * device preference. + */ + if (sdkp->lbprz) { + q->limits.discard_alignment = 0; + q->limits.discard_granularity = 1; + } else { + q->limits.discard_alignment = sdkp->unmap_alignment * + logical_block_size; + q->limits.discard_granularity = + max(sdkp->physical_block_size, + sdkp->unmap_granularity * logical_block_size); + } sdkp->provisioning_mode = mode; @@ -2321,11 +2334,8 @@ got_data: } } - if (sdkp->capacity > 0xffffffff) { + if (sdkp->capacity > 0xffffffff) sdp->use_16_for_rw = 1; - sdkp->max_xfer_blocks = SD_MAX_XFER_BLOCKS; - } else - sdkp->max_xfer_blocks = SD_DEF_XFER_BLOCKS; /* Rescale capacity to 512-byte units */ if (sector_size == 4096) @@ -2642,7 +2652,6 @@ static void sd_read_block_limits(struct scsi_disk *sdkp) { unsigned int sector_sz = sdkp->device->sector_size; const int vpd_len = 64; - u32 max_xfer_length; unsigned char *buffer = kmalloc(vpd_len, GFP_KERNEL); if (!buffer || @@ -2650,14 +2659,11 @@ static void sd_read_block_limits(struct scsi_disk *sdkp) scsi_get_vpd_page(sdkp->device, 0xb0, buffer, vpd_len)) goto out; - max_xfer_length = get_unaligned_be32(&buffer[8]); - if (max_xfer_length) - sdkp->max_xfer_blocks = max_xfer_length; - blk_queue_io_min(sdkp->disk->queue, get_unaligned_be16(&buffer[6]) * sector_sz); - blk_queue_io_opt(sdkp->disk->queue, - get_unaligned_be32(&buffer[12]) * sector_sz); + + sdkp->max_xfer_blocks = get_unaligned_be32(&buffer[8]); + sdkp->opt_xfer_blocks = get_unaligned_be32(&buffer[12]); if (buffer[3] == 0x3c) { unsigned int lba_count, desc_count; @@ -2806,6 +2812,11 @@ static int sd_try_extended_inquiry(struct scsi_device *sdp) return 0; } +static inline u32 logical_to_sectors(struct scsi_device *sdev, u32 blocks) +{ + return blocks << (ilog2(sdev->sector_size) - 9); +} + /** * sd_revalidate_disk - called the first time a new disk is seen, * performs disk spin up, read_capacity, etc. @@ -2815,8 +2826,9 @@ static int sd_revalidate_disk(struct gendisk *disk) { struct scsi_disk *sdkp = scsi_disk(disk); struct scsi_device *sdp = sdkp->device; + struct request_queue *q = sdkp->disk->queue; unsigned char *buffer; - unsigned int max_xfer; + unsigned int dev_max, rw_max; SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_revalidate_disk\n")); @@ -2864,11 +2876,26 @@ static int sd_revalidate_disk(struct gendisk *disk) */ sd_set_flush_flag(sdkp); - max_xfer = sdkp->max_xfer_blocks; - max_xfer <<= ilog2(sdp->sector_size) - 9; + /* Initial block count limit based on CDB TRANSFER LENGTH field size. */ + dev_max = sdp->use_16_for_rw ? SD_MAX_XFER_BLOCKS : SD_DEF_XFER_BLOCKS; + + /* Some devices report a maximum block count for READ/WRITE requests. */ + dev_max = min_not_zero(dev_max, sdkp->max_xfer_blocks); + q->limits.max_dev_sectors = logical_to_sectors(sdp, dev_max); + + /* + * Use the device's preferred I/O size for reads and writes + * unless the reported value is unreasonably large (or garbage). + */ + if (sdkp->opt_xfer_blocks && sdkp->opt_xfer_blocks <= dev_max && + sdkp->opt_xfer_blocks <= SD_DEF_XFER_BLOCKS) + rw_max = q->limits.io_opt = + logical_to_sectors(sdp, sdkp->opt_xfer_blocks); + else + rw_max = BLK_DEF_MAX_SECTORS; - sdkp->disk->queue->limits.max_sectors = - min_not_zero(queue_max_hw_sectors(sdkp->disk->queue), max_xfer); + /* Combine with controller limits */ + q->limits.max_sectors = min(rw_max, queue_max_hw_sectors(q)); set_capacity(disk, sdkp->capacity); sd_config_write_same(sdkp); diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index 63ba5ca..5f2a84a 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -67,6 +67,7 @@ struct scsi_disk { atomic_t openers; sector_t capacity; /* size in 512-byte sectors */ u32 max_xfer_blocks; + u32 opt_xfer_blocks; u32 max_ws_blocks; u32 max_unmap_blocks; u32 unmap_granularity; diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c index dcb0d76..044d064 100644 --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -84,6 +84,7 @@ static void init_device_slot_control(unsigned char *dest_desc, static int ses_recv_diag(struct scsi_device *sdev, int page_code, void *buf, int bufflen) { + int ret; unsigned char cmd[] = { RECEIVE_DIAGNOSTIC, 1, /* Set PCV bit */ @@ -92,9 +93,26 @@ static int ses_recv_diag(struct scsi_device *sdev, int page_code, bufflen & 0xff, 0 }; + unsigned char recv_page_code; - return scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen, + ret = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen, NULL, SES_TIMEOUT, SES_RETRIES, NULL); + if (unlikely(!ret)) + return ret; + + recv_page_code = ((unsigned char *)buf)[0]; + + if (likely(recv_page_code == page_code)) + return ret; + + /* successful diagnostic but wrong page code. This happens to some + * USB devices, just print a message and pretend there was an error */ + + sdev_printk(KERN_ERR, sdev, + "Wrong diagnostic page; asked for %d got %u\n", + page_code, recv_page_code); + + return -EINVAL; } static int ses_send_diag(struct scsi_device *sdev, int page_code, @@ -541,7 +559,15 @@ static void ses_enclosure_data_process(struct enclosure_device *edev, if (desc_ptr) desc_ptr += len; - if (addl_desc_ptr) + if (addl_desc_ptr && + /* only find additional descriptions for specific devices */ + (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE || + type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE || + type_ptr[0] == ENCLOSURE_COMPONENT_SAS_EXPANDER || + /* these elements are optional */ + type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_TARGET_PORT || + type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_INITIATOR_PORT || + type_ptr[0] == ENCLOSURE_COMPONENT_CONTROLLER_ELECTRONICS)) addl_desc_ptr += addl_desc_ptr[1] + 2; } diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index e0a1e52..2e52295 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -4083,6 +4083,7 @@ static int create_one_cdev(struct scsi_tape *tape, int mode, int rew) } cdev->owner = THIS_MODULE; cdev->ops = &st_fops; + STm->cdevs[rew] = cdev; error = cdev_add(cdev, cdev_devno, 1); if (error) { @@ -4091,7 +4092,6 @@ static int create_one_cdev(struct scsi_tape *tape, int mode, int rew) pr_err("st%d: Device not attached.\n", dev_num); goto out_free; } - STm->cdevs[rew] = cdev; i = mode << (4 - ST_NBR_MODE_BITS); snprintf(name, 10, "%s%s%s", rew ? "n" : "", @@ -4110,8 +4110,9 @@ static int create_one_cdev(struct scsi_tape *tape, int mode, int rew) return 0; out_free: cdev_del(STm->cdevs[rew]); - STm->cdevs[rew] = NULL; out: + STm->cdevs[rew] = NULL; + STm->devs[rew] = NULL; return error; } |