diff options
Diffstat (limited to 'drivers/scsi/sym53c8xx_2')
| -rw-r--r-- | drivers/scsi/sym53c8xx_2/sym53c8xx.h | 1 | ||||
| -rw-r--r-- | drivers/scsi/sym53c8xx_2/sym_fw.c | 18 | ||||
| -rw-r--r-- | drivers/scsi/sym53c8xx_2/sym_fw.h | 2 | ||||
| -rw-r--r-- | drivers/scsi/sym53c8xx_2/sym_glue.c | 581 | ||||
| -rw-r--r-- | drivers/scsi/sym53c8xx_2/sym_glue.h | 16 | ||||
| -rw-r--r-- | drivers/scsi/sym53c8xx_2/sym_hipd.c | 159 | ||||
| -rw-r--r-- | drivers/scsi/sym53c8xx_2/sym_hipd.h | 22 | ||||
| -rw-r--r-- | drivers/scsi/sym53c8xx_2/sym_nvram.c | 2 |
8 files changed, 416 insertions, 385 deletions
diff --git a/drivers/scsi/sym53c8xx_2/sym53c8xx.h b/drivers/scsi/sym53c8xx_2/sym53c8xx.h index 7519728..62d29cf 100644 --- a/drivers/scsi/sym53c8xx_2/sym53c8xx.h +++ b/drivers/scsi/sym53c8xx_2/sym53c8xx.h @@ -127,7 +127,6 @@ struct sym_driver_setup { u_char settle_delay; u_char use_nvram; u_long excludes[8]; - char tag_ctrl[100]; }; #define SYM_SETUP_MAX_TAG sym_driver_setup.max_tag diff --git a/drivers/scsi/sym53c8xx_2/sym_fw.c b/drivers/scsi/sym53c8xx_2/sym_fw.c index 9916a2a..190770b 100644 --- a/drivers/scsi/sym53c8xx_2/sym_fw.c +++ b/drivers/scsi/sym53c8xx_2/sym_fw.c @@ -104,8 +104,9 @@ static struct sym_fwz_ofs sym_fw2z_ofs = { * Patch routine for firmware #1. */ static void -sym_fw1_patch(struct sym_hcb *np) +sym_fw1_patch(struct Scsi_Host *shost) { + struct sym_hcb *np = sym_get_hcb(shost); struct sym_fw1a_scr *scripta0; struct sym_fw1b_scr *scriptb0; @@ -145,8 +146,11 @@ sym_fw1_patch(struct sym_hcb *np) * Patch routine for firmware #2. */ static void -sym_fw2_patch(struct sym_hcb *np) +sym_fw2_patch(struct Scsi_Host *shost) { + struct sym_data *sym_data = shost_priv(shost); + struct pci_dev *pdev = sym_data->pdev; + struct sym_hcb *np = sym_data->ncb; struct sym_fw2a_scr *scripta0; struct sym_fw2b_scr *scriptb0; @@ -167,7 +171,7 @@ sym_fw2_patch(struct sym_hcb *np) * Remove useless 64 bit DMA specific SCRIPTS, * when this feature is not available. */ - if (!np->use_dac) { + if (!use_dac(np)) { scripta0->is_dmap_dirty[0] = cpu_to_scr(SCR_NO_OP); scripta0->is_dmap_dirty[1] = 0; scripta0->is_dmap_dirty[2] = cpu_to_scr(SCR_NO_OP); @@ -205,14 +209,14 @@ sym_fw2_patch(struct sym_hcb *np) * Remove a couple of work-arounds specific to C1010 if * they are not desirable. See `sym_fw2.h' for more details. */ - if (!(np->device_id == PCI_DEVICE_ID_LSI_53C1010_66 && - np->revision_id < 0x1 && + if (!(pdev->device == PCI_DEVICE_ID_LSI_53C1010_66 && + pdev->revision < 0x1 && np->pciclk_khz < 60000)) { scripta0->datao_phase[0] = cpu_to_scr(SCR_NO_OP); scripta0->datao_phase[1] = cpu_to_scr(0); } - if (!(np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 && - /* np->revision_id < 0xff */ 1)) { + if (!(pdev->device == PCI_DEVICE_ID_LSI_53C1010_33 /* && + pdev->revision < 0xff */)) { scripta0->sel_done[0] = cpu_to_scr(SCR_NO_OP); scripta0->sel_done[1] = cpu_to_scr(0); } diff --git a/drivers/scsi/sym53c8xx_2/sym_fw.h b/drivers/scsi/sym53c8xx_2/sym_fw.h index 66ec35b..ae7e0f9 100644 --- a/drivers/scsi/sym53c8xx_2/sym_fw.h +++ b/drivers/scsi/sym53c8xx_2/sym_fw.h @@ -143,7 +143,7 @@ struct sym_fw { *z_ofs; /* Useful offsets in script Z */ /* Setup and patch methods for this firmware */ void (*setup)(struct sym_hcb *, struct sym_fw *); - void (*patch)(struct sym_hcb *); + void (*patch)(struct Scsi_Host *); }; /* diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index db03c4c8..0f74aba 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -39,7 +39,6 @@ */ #include <linux/ctype.h> #include <linux/init.h> -#include <linux/interrupt.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/spinlock.h> @@ -54,16 +53,12 @@ #define NAME53C "sym53c" #define NAME53C8XX "sym53c8xx" -#define IRQ_FMT "%d" -#define IRQ_PRM(x) (x) - struct sym_driver_setup sym_driver_setup = SYM_LINUX_DRIVER_SETUP; unsigned int sym_debug_flags = 0; static char *excl_string; static char *safe_string; module_param_named(cmd_per_lun, sym_driver_setup.max_tag, ushort, 0); -module_param_string(tag_ctrl, sym_driver_setup.tag_ctrl, 100, 0); module_param_named(burst, sym_driver_setup.burst_order, byte, 0); module_param_named(led, sym_driver_setup.scsi_led, byte, 0); module_param_named(diff, sym_driver_setup.scsi_diff, byte, 0); @@ -78,7 +73,6 @@ module_param_named(excl, excl_string, charp, 0); module_param_named(safe, safe_string, charp, 0); MODULE_PARM_DESC(cmd_per_lun, "The maximum number of tags to use by default"); -MODULE_PARM_DESC(tag_ctrl, "More detailed control over tags per LUN"); MODULE_PARM_DESC(burst, "Maximum burst. 0 to disable, 255 to read from registers"); MODULE_PARM_DESC(led, "Set to 1 to enable LED support"); MODULE_PARM_DESC(diff, "0 for no differential mode, 1 for BIOS, 2 for always, 3 for not GPIO3"); @@ -134,56 +128,26 @@ static struct scsi_transport_template *sym2_transport_template = NULL; * Driver private area in the SCSI command structure. */ struct sym_ucmd { /* Override the SCSI pointer structure */ - dma_addr_t data_mapping; - unsigned char data_mapped; - unsigned char to_do; /* For error handling */ - void (*old_done)(struct scsi_cmnd *); /* For error handling */ - struct completion *eh_done; /* For error handling */ + struct completion *eh_done; /* SCSI error handling */ }; #define SYM_UCMD_PTR(cmd) ((struct sym_ucmd *)(&(cmd)->SCp)) #define SYM_SOFTC_PTR(cmd) sym_get_hcb(cmd->device->host) -static void __unmap_scsi_data(struct pci_dev *pdev, struct scsi_cmnd *cmd) -{ - if (SYM_UCMD_PTR(cmd)->data_mapped) - scsi_dma_unmap(cmd); - - SYM_UCMD_PTR(cmd)->data_mapped = 0; -} - -static int __map_scsi_sg_data(struct pci_dev *pdev, struct scsi_cmnd *cmd) -{ - int use_sg; - - use_sg = scsi_dma_map(cmd); - if (use_sg > 0) { - SYM_UCMD_PTR(cmd)->data_mapped = 2; - SYM_UCMD_PTR(cmd)->data_mapping = use_sg; - } - - return use_sg; -} - -#define unmap_scsi_data(np, cmd) \ - __unmap_scsi_data(np->s.device, cmd) -#define map_scsi_sg_data(np, cmd) \ - __map_scsi_sg_data(np->s.device, cmd) /* * Complete a pending CAM CCB. */ void sym_xpt_done(struct sym_hcb *np, struct scsi_cmnd *cmd) { - unmap_scsi_data(np, cmd); - cmd->scsi_done(cmd); -} + struct sym_ucmd *ucmd = SYM_UCMD_PTR(cmd); + BUILD_BUG_ON(sizeof(struct scsi_pointer) < sizeof(struct sym_ucmd)); -static void sym_xpt_done2(struct sym_hcb *np, struct scsi_cmnd *cmd, int cam_status) -{ - sym_set_cam_status(cmd, cam_status); - sym_xpt_done(np, cmd); -} + if (ucmd->eh_done) + complete(ucmd->eh_done); + scsi_dma_unmap(cmd); + cmd->scsi_done(cmd); +} /* * Tell the SCSI layer about a BUS RESET. @@ -199,14 +163,6 @@ void sym_xpt_async_bus_reset(struct sym_hcb *np) } /* - * Tell the SCSI layer about a BUS DEVICE RESET message sent. - */ -void sym_xpt_async_sent_bdr(struct sym_hcb *np, int target) -{ - printf_notice("%s: TARGET %d has been reset.\n", sym_name(np), target); -} - -/* * Choose the more appropriate CAM status if * the IO encountered an extended error. */ @@ -307,14 +263,14 @@ static int sym_scatter(struct sym_hcb *np, struct sym_ccb *cp, struct scsi_cmnd cp->data_len = 0; - use_sg = map_scsi_sg_data(np, cmd); + use_sg = scsi_dma_map(cmd); if (use_sg > 0) { struct scatterlist *sg; struct sym_tcb *tp = &np->target[cp->target]; struct sym_tblmove *data; if (use_sg > SYM_CONF_MAX_SG) { - unmap_scsi_data(np, cmd); + scsi_dma_unmap(cmd); return -1; } @@ -351,15 +307,6 @@ static int sym_queue_command(struct sym_hcb *np, struct scsi_cmnd *cmd) int order; /* - * Minimal checkings, so that we will not - * go outside our tables. - */ - if (sdev->id == np->myaddr) { - sym_xpt_done2(np, cmd, DID_NO_CONNECT); - return 0; - } - - /* * Retrieve the target descriptor. */ tp = &np->target[sdev->id]; @@ -433,7 +380,7 @@ int sym_setup_data_and_start(struct sym_hcb *np, struct scsi_cmnd *cmd, struct s */ switch (dir) { case DMA_BIDIRECTIONAL: - printk("%s: got DMA_BIDIRECTIONAL command", sym_name(np)); + scmd_printk(KERN_INFO, cmd, "got DMA_BIDIRECTIONAL command"); sym_set_cam_status(cmd, DID_ERROR); goto out_abort; case DMA_TO_DEVICE: @@ -542,14 +489,16 @@ static void sym_timer(struct sym_hcb *np) /* * PCI BUS error handler. */ -void sym_log_bus_error(struct sym_hcb *np) +void sym_log_bus_error(struct Scsi_Host *shost) { - u_short pci_sts; - pci_read_config_word(np->s.device, PCI_STATUS, &pci_sts); + struct sym_data *sym_data = shost_priv(shost); + struct pci_dev *pdev = sym_data->pdev; + unsigned short pci_sts; + pci_read_config_word(pdev, PCI_STATUS, &pci_sts); if (pci_sts & 0xf900) { - pci_write_config_word(np->s.device, PCI_STATUS, pci_sts); - printf("%s: PCI STATUS = 0x%04x\n", - sym_name(np), pci_sts & 0xf900); + pci_write_config_word(pdev, PCI_STATUS, pci_sts); + shost_printk(KERN_WARNING, shost, + "PCI bus error: status = 0x%04x\n", pci_sts & 0xf900); } } @@ -564,7 +513,7 @@ static int sym53c8xx_queue_command(struct scsi_cmnd *cmd, struct sym_ucmd *ucp = SYM_UCMD_PTR(cmd); int sts = 0; - cmd->scsi_done = done; + cmd->scsi_done = done; memset(ucp, 0, sizeof(*ucp)); /* @@ -593,18 +542,23 @@ static int sym53c8xx_queue_command(struct scsi_cmnd *cmd, */ static irqreturn_t sym53c8xx_intr(int irq, void *dev_id) { - unsigned long flags; - struct sym_hcb *np = (struct sym_hcb *)dev_id; + struct Scsi_Host *shost = dev_id; + struct sym_data *sym_data = shost_priv(shost); + irqreturn_t result; + + /* Avoid spinloop trying to handle interrupts on frozen device */ + if (pci_channel_offline(sym_data->pdev)) + return IRQ_NONE; if (DEBUG_FLAGS & DEBUG_TINY) printf_debug ("["); - spin_lock_irqsave(np->s.host->host_lock, flags); - sym_interrupt(np); - spin_unlock_irqrestore(np->s.host->host_lock, flags); + spin_lock(shost->host_lock); + result = sym_interrupt(shost); + spin_unlock(shost->host_lock); if (DEBUG_FLAGS & DEBUG_TINY) printf_debug ("]\n"); - return IRQ_HANDLED; + return result; } /* @@ -630,59 +584,61 @@ static void sym53c8xx_timer(unsigned long npref) #define SYM_EH_HOST_RESET 3 /* - * What we will do regarding the involved SCSI command. - */ -#define SYM_EH_DO_IGNORE 0 -#define SYM_EH_DO_WAIT 2 - -/* - * scsi_done() alias when error recovery is in progress. - */ -static void sym_eh_done(struct scsi_cmnd *cmd) -{ - struct sym_ucmd *ucmd = SYM_UCMD_PTR(cmd); - BUILD_BUG_ON(sizeof(struct scsi_pointer) < sizeof(struct sym_ucmd)); - - cmd->scsi_done = ucmd->old_done; - - if (ucmd->to_do == SYM_EH_DO_WAIT) - complete(ucmd->eh_done); -} - -/* * Generic method for our eh processing. * The 'op' argument tells what we have to do. */ static int sym_eh_handler(int op, char *opname, struct scsi_cmnd *cmd) { - struct sym_hcb *np = SYM_SOFTC_PTR(cmd); struct sym_ucmd *ucmd = SYM_UCMD_PTR(cmd); - struct Scsi_Host *host = cmd->device->host; + struct Scsi_Host *shost = cmd->device->host; + struct sym_data *sym_data = shost_priv(shost); + struct pci_dev *pdev = sym_data->pdev; + struct sym_hcb *np = sym_data->ncb; SYM_QUEHEAD *qp; - int to_do = SYM_EH_DO_IGNORE; + int cmd_queued = 0; int sts = -1; struct completion eh_done; - dev_warn(&cmd->device->sdev_gendev, "%s operation started.\n", opname); + scmd_printk(KERN_WARNING, cmd, "%s operation started\n", opname); + + /* We may be in an error condition because the PCI bus + * went down. In this case, we need to wait until the + * PCI bus is reset, the card is reset, and only then + * proceed with the scsi error recovery. There's no + * point in hurrying; take a leisurely wait. + */ +#define WAIT_FOR_PCI_RECOVERY 35 + if (pci_channel_offline(pdev)) { + struct completion *io_reset; + int finished_reset = 0; + init_completion(&eh_done); + spin_lock_irq(shost->host_lock); + /* Make sure we didn't race */ + if (pci_channel_offline(pdev)) { + if (!sym_data->io_reset) + sym_data->io_reset = &eh_done; + io_reset = sym_data->io_reset; + } else { + finished_reset = 1; + } + spin_unlock_irq(shost->host_lock); + if (!finished_reset) + finished_reset = wait_for_completion_timeout(io_reset, + WAIT_FOR_PCI_RECOVERY*HZ); + if (!finished_reset) + return SCSI_FAILED; + } - spin_lock_irq(host->host_lock); + spin_lock_irq(shost->host_lock); /* This one is queued in some place -> to wait for completion */ FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) { struct sym_ccb *cp = sym_que_entry(qp, struct sym_ccb, link_ccbq); if (cp->cmd == cmd) { - to_do = SYM_EH_DO_WAIT; + cmd_queued = 1; break; } } - if (to_do == SYM_EH_DO_WAIT) { - init_completion(&eh_done); - ucmd->old_done = cmd->scsi_done; - ucmd->eh_done = &eh_done; - wmb(); - cmd->scsi_done = sym_eh_done; - } - /* Try to proceed the operation we have been asked for */ sts = -1; switch(op) { @@ -698,7 +654,7 @@ static int sym_eh_handler(int op, char *opname, struct scsi_cmnd *cmd) break; case SYM_EH_HOST_RESET: sym_reset_scsi_bus(np, 0); - sym_start_up (np, 1); + sym_start_up(shost, 1); sts = 0; break; default: @@ -706,21 +662,21 @@ static int sym_eh_handler(int op, char *opname, struct scsi_cmnd *cmd) } /* On error, restore everything and cross fingers :) */ - if (sts) { - cmd->scsi_done = ucmd->old_done; - to_do = SYM_EH_DO_IGNORE; - } - - ucmd->to_do = to_do; - spin_unlock_irq(host->host_lock); + if (sts) + cmd_queued = 0; - if (to_do == SYM_EH_DO_WAIT) { + if (cmd_queued) { + init_completion(&eh_done); + ucmd->eh_done = &eh_done; + spin_unlock_irq(shost->host_lock); if (!wait_for_completion_timeout(&eh_done, 5*HZ)) { - ucmd->to_do = SYM_EH_DO_IGNORE; - wmb(); + ucmd->eh_done = NULL; sts = -2; } + } else { + spin_unlock_irq(shost->host_lock); } + dev_warn(&cmd->device->sdev_gendev, "%s operation %s.\n", opname, sts==0 ? "complete" :sts==-2 ? "timed-out" : "failed"); return sts ? SCSI_FAILED : SCSI_SUCCESS; @@ -775,59 +731,6 @@ static void sym_tune_dev_queuing(struct sym_tcb *tp, int lun, u_short reqtags) } } -/* - * Linux select queue depths function - */ -#define DEF_DEPTH (sym_driver_setup.max_tag) -#define ALL_TARGETS -2 -#define NO_TARGET -1 -#define ALL_LUNS -2 -#define NO_LUN -1 - -static int device_queue_depth(struct sym_hcb *np, int target, int lun) -{ - int c, h, t, u, v; - char *p = sym_driver_setup.tag_ctrl; - char *ep; - - h = -1; - t = NO_TARGET; - u = NO_LUN; - while ((c = *p++) != 0) { - v = simple_strtoul(p, &ep, 0); - switch(c) { - case '/': - ++h; - t = ALL_TARGETS; - u = ALL_LUNS; - break; - case 't': - if (t != target) - t = (target == v) ? v : NO_TARGET; - u = ALL_LUNS; - break; - case 'u': - if (u != lun) - u = (lun == v) ? v : NO_LUN; - break; - case 'q': - if (h == np->s.unit && - (t == ALL_TARGETS || t == target) && - (u == ALL_LUNS || u == lun)) - return v; - break; - case '-': - t = ALL_TARGETS; - u = ALL_LUNS; - break; - default: - break; - } - p = ep; - } - return DEF_DEPTH; -} - static int sym53c8xx_slave_alloc(struct scsi_device *sdev) { struct sym_hcb *np = sym_get_hcb(sdev->host); @@ -892,21 +795,16 @@ static int sym53c8xx_slave_configure(struct scsi_device *sdev) * Use at least 2. * Donnot use more than our maximum. */ - reqtags = device_queue_depth(np, sdev->id, sdev->lun); + reqtags = sym_driver_setup.max_tag; if (reqtags > tp->usrtags) reqtags = tp->usrtags; if (!sdev->tagged_supported) reqtags = 0; -#if 1 /* Avoid to locally queue commands for no good reasons */ if (reqtags > SYM_CONF_MAX_TAG) reqtags = SYM_CONF_MAX_TAG; - depth_to_use = (reqtags ? reqtags : 2); -#else - depth_to_use = (reqtags ? SYM_CONF_MAX_TAG : 2); -#endif + depth_to_use = reqtags ? reqtags : 2; scsi_adjust_queue_depth(sdev, - (sdev->tagged_supported ? - MSG_SIMPLE_TAG : 0), + sdev->tagged_supported ? MSG_SIMPLE_TAG : 0, depth_to_use); lp->s.scdev_depth = depth_to_use; sym_tune_dev_queuing(tp, sdev->lun, reqtags); @@ -1089,8 +987,9 @@ static int is_keyword(char *ptr, int len, char *verb) * Parse a control command */ -static int sym_user_command(struct sym_hcb *np, char *buffer, int length) +static int sym_user_command(struct Scsi_Host *shost, char *buffer, int length) { + struct sym_hcb *np = sym_get_hcb(shost); char *ptr = buffer; int len = length; struct sym_usrcmd cmd, *uc = &cmd; @@ -1217,9 +1116,9 @@ printk("sym_user_command: data=%ld\n", uc->data); else { unsigned long flags; - spin_lock_irqsave(np->s.host->host_lock, flags); - sym_exec_user_command (np, uc); - spin_unlock_irqrestore(np->s.host->host_lock, flags); + spin_lock_irqsave(shost->host_lock, flags); + sym_exec_user_command(np, uc); + spin_unlock_irqrestore(shost->host_lock, flags); } return length; } @@ -1275,8 +1174,11 @@ static int copy_info(struct info_str *info, char *fmt, ...) /* * Copy formatted information into the input buffer. */ -static int sym_host_info(struct sym_hcb *np, char *ptr, off_t offset, int len) +static int sym_host_info(struct Scsi_Host *shost, char *ptr, off_t offset, int len) { + struct sym_data *sym_data = shost_priv(shost); + struct pci_dev *pdev = sym_data->pdev; + struct sym_hcb *np = sym_data->ncb; struct info_str info; info.buffer = ptr; @@ -1285,10 +1187,10 @@ static int sym_host_info(struct sym_hcb *np, char *ptr, off_t offset, int len) info.pos = 0; copy_info(&info, "Chip " NAME53C "%s, device id 0x%x, " - "revision id 0x%x\n", - np->s.chip_name, np->device_id, np->revision_id); - copy_info(&info, "At PCI address %s, IRQ " IRQ_FMT "\n", - pci_name(np->s.device), IRQ_PRM(np->s.irq)); + "revision id 0x%x\n", np->s.chip_name, + pdev->device, pdev->revision); + copy_info(&info, "At PCI address %s, IRQ %u\n", + pci_name(pdev), pdev->irq); copy_info(&info, "Min. period factor %d, %s SCSI BUS%s\n", (int) (np->minsync_dt ? np->minsync_dt : np->minsync), np->maxwide ? "Wide" : "Narrow", @@ -1307,15 +1209,14 @@ static int sym_host_info(struct sym_hcb *np, char *ptr, off_t offset, int len) * - func = 0 means read (returns adapter infos) * - func = 1 means write (not yet merget from sym53c8xx) */ -static int sym53c8xx_proc_info(struct Scsi_Host *host, char *buffer, +static int sym53c8xx_proc_info(struct Scsi_Host *shost, char *buffer, char **start, off_t offset, int length, int func) { - struct sym_hcb *np = sym_get_hcb(host); int retv; if (func) { #ifdef SYM_LINUX_USER_COMMAND_SUPPORT - retv = sym_user_command(np, buffer, length); + retv = sym_user_command(shost, buffer, length); #else retv = -EINVAL; #endif @@ -1323,7 +1224,7 @@ static int sym53c8xx_proc_info(struct Scsi_Host *host, char *buffer, if (start) *start = buffer; #ifdef SYM_LINUX_USER_INFO_SUPPORT - retv = sym_host_info(np, buffer, offset, length); + retv = sym_host_info(shost, buffer, offset, length); #else retv = -EINVAL; #endif @@ -1341,8 +1242,8 @@ static void sym_free_resources(struct sym_hcb *np, struct pci_dev *pdev) /* * Free O/S specific resources. */ - if (np->s.irq) - free_irq(np->s.irq, np); + if (pdev->irq) + free_irq(pdev->irq, np); if (np->s.ioaddr) pci_iounmap(pdev, np->s.ioaddr); if (np->s.ramaddr) @@ -1356,31 +1257,6 @@ static void sym_free_resources(struct sym_hcb *np, struct pci_dev *pdev) } /* - * Ask/tell the system about DMA addressing. - */ -static int sym_setup_bus_dma_mask(struct sym_hcb *np) -{ -#if SYM_CONF_DMA_ADDRESSING_MODE > 0 -#if SYM_CONF_DMA_ADDRESSING_MODE == 1 -#define DMA_DAC_MASK DMA_40BIT_MASK -#elif SYM_CONF_DMA_ADDRESSING_MODE == 2 -#define DMA_DAC_MASK DMA_64BIT_MASK -#endif - if ((np->features & FE_DAC) && - !pci_set_dma_mask(np->s.device, DMA_DAC_MASK)) { - np->use_dac = 1; - return 0; - } -#endif - - if (!pci_set_dma_mask(np->s.device, DMA_32BIT_MASK)) - return 0; - - printf_warning("%s: No suitable DMA available\n", sym_name(np)); - return -1; -} - -/* * Host attach and initialisations. * * Allocate host data and ncb structure. @@ -1392,32 +1268,28 @@ static int sym_setup_bus_dma_mask(struct sym_hcb *np) static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, int unit, struct sym_device *dev) { - struct host_data *host_data; + struct sym_data *sym_data; struct sym_hcb *np = NULL; - struct Scsi_Host *instance = NULL; + struct Scsi_Host *shost; struct pci_dev *pdev = dev->pdev; unsigned long flags; struct sym_fw *fw; - printk(KERN_INFO - "sym%d: <%s> rev 0x%x at pci %s irq " IRQ_FMT "\n", - unit, dev->chip.name, dev->chip.revision_id, - pci_name(pdev), IRQ_PRM(pdev->irq)); + printk(KERN_INFO "sym%d: <%s> rev 0x%x at pci %s irq %u\n", + unit, dev->chip.name, pdev->revision, pci_name(pdev), + pdev->irq); /* * Get the firmware for this chip. */ fw = sym_find_firmware(&dev->chip); if (!fw) - goto attach_failed; + return NULL; - /* - * Allocate host_data structure - */ - instance = scsi_host_alloc(tpnt, sizeof(*host_data)); - if (!instance) - goto attach_failed; - host_data = (struct host_data *) instance->hostdata; + shost = scsi_host_alloc(tpnt, sizeof(*sym_data)); + if (!shost) + return NULL; + sym_data = shost_priv(shost); /* * Allocate immediately the host control block, @@ -1428,22 +1300,19 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, np = __sym_calloc_dma(&pdev->dev, sizeof(*np), "HCB"); if (!np) goto attach_failed; - np->s.device = pdev; np->bus_dmat = &pdev->dev; /* Result in 1 DMA pool per HBA */ - host_data->ncb = np; - np->s.host = instance; + sym_data->ncb = np; + sym_data->pdev = pdev; + np->s.host = shost; - pci_set_drvdata(pdev, np); + pci_set_drvdata(pdev, shost); /* * Copy some useful infos to the HCB. */ np->hcb_ba = vtobus(np); np->verbose = sym_driver_setup.verbose; - np->s.device = pdev; np->s.unit = unit; - np->device_id = dev->chip.device_id; - np->revision_id = dev->chip.revision_id; np->features = dev->chip.features; np->clock_divn = dev->chip.nr_divisor; np->maxoffs = dev->chip.offset_max; @@ -1456,8 +1325,13 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, strlcpy(np->s.chip_name, dev->chip.name, sizeof(np->s.chip_name)); sprintf(np->s.inst_name, "sym%d", np->s.unit); - if (sym_setup_bus_dma_mask(np)) + if ((SYM_CONF_DMA_ADDRESSING_MODE > 0) && (np->features & FE_DAC) && + !pci_set_dma_mask(pdev, DMA_DAC_MASK)) { + set_dac(np); + } else if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { + printf_warning("%s: No suitable DMA available\n", sym_name(np)); goto attach_failed; + } /* * Try to map the controller chip to @@ -1466,19 +1340,16 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, np->mmio_ba = (u32)dev->mmio_base; np->s.ioaddr = dev->s.ioaddr; np->s.ramaddr = dev->s.ramaddr; - np->s.io_ws = (np->features & FE_IO256) ? 256 : 128; /* * Map on-chip RAM if present and supported. */ if (!(np->features & FE_RAM)) dev->ram_base = 0; - if (dev->ram_base) { + if (dev->ram_base) np->ram_ba = (u32)dev->ram_base; - np->ram_ws = (np->features & FE_RAM8K) ? 8192 : 4096; - } - if (sym_hcb_attach(instance, fw, dev->nvram)) + if (sym_hcb_attach(shost, fw, dev->nvram)) goto attach_failed; /* @@ -1486,25 +1357,25 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, * If we synchonize the C code with SCRIPTS on interrupt, * we do not want to share the INTR line at all. */ - if (request_irq(pdev->irq, sym53c8xx_intr, IRQF_SHARED, NAME53C8XX, np)) { - printf_err("%s: request irq %d failure\n", + if (request_irq(pdev->irq, sym53c8xx_intr, IRQF_SHARED, NAME53C8XX, + shost)) { + printf_err("%s: request irq %u failure\n", sym_name(np), pdev->irq); goto attach_failed; } - np->s.irq = pdev->irq; /* * After SCSI devices have been opened, we cannot * reset the bus safely, so we do it here. */ - spin_lock_irqsave(instance->host_lock, flags); + spin_lock_irqsave(shost->host_lock, flags); if (sym_reset_scsi_bus(np, 0)) goto reset_failed; /* * Start the SCRIPTS. */ - sym_start_up (np, 1); + sym_start_up(shost, 1); /* * Start the timer daemon @@ -1519,33 +1390,37 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, * Fill Linux host instance structure * and return success. */ - instance->max_channel = 0; - instance->this_id = np->myaddr; - instance->max_id = np->maxwide ? 16 : 8; - instance->max_lun = SYM_CONF_MAX_LUN; - instance->unique_id = pci_resource_start(pdev, 0); - instance->cmd_per_lun = SYM_CONF_MAX_TAG; - instance->can_queue = (SYM_CONF_MAX_START-2); - instance->sg_tablesize = SYM_CONF_MAX_SG; - instance->max_cmd_len = 16; + shost->max_channel = 0; + shost->this_id = np->myaddr; + shost->max_id = np->maxwide ? 16 : 8; + shost->max_lun = SYM_CONF_MAX_LUN; + shost->unique_id = pci_resource_start(pdev, 0); + shost->cmd_per_lun = SYM_CONF_MAX_TAG; + shost->can_queue = (SYM_CONF_MAX_START-2); + shost->sg_tablesize = SYM_CONF_MAX_SG; + shost->max_cmd_len = 16; BUG_ON(sym2_transport_template == NULL); - instance->transportt = sym2_transport_template; + shost->transportt = sym2_transport_template; + + /* 53c896 rev 1 errata: DMA may not cross 16MB boundary */ + if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && pdev->revision < 2) + shost->dma_boundary = 0xFFFFFF; - spin_unlock_irqrestore(instance->host_lock, flags); + spin_unlock_irqrestore(shost->host_lock, flags); - return instance; + return shost; reset_failed: printf_err("%s: FATAL ERROR: CHECK SCSI BUS - CABLES, " "TERMINATION, DEVICE POWER etc.!\n", sym_name(np)); - spin_unlock_irqrestore(instance->host_lock, flags); + spin_unlock_irqrestore(shost->host_lock, flags); attach_failed: - if (!instance) + if (!shost) return NULL; printf_info("%s: giving up ...\n", sym_name(np)); if (np) sym_free_resources(np, pdev); - scsi_host_put(instance); + scsi_host_put(shost); return NULL; } @@ -1558,7 +1433,6 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, static void __devinit sym_get_nvram(struct sym_device *devp, struct sym_nvram *nvp) { devp->nvram = nvp; - devp->device_id = devp->chip.device_id; nvp->type = 0; sym_read_nvram(devp, nvp); @@ -1573,7 +1447,6 @@ static int __devinit sym_check_supported(struct sym_device *device) { struct sym_chip *chip; struct pci_dev *pdev = device->pdev; - u_char revision; unsigned long io_port = pci_resource_start(pdev, 0); int i; @@ -1593,14 +1466,12 @@ static int __devinit sym_check_supported(struct sym_device *device) * to our device structure so we can make it match the actual device * and options. */ - pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision); - chip = sym_lookup_chip_table(pdev->device, revision); + chip = sym_lookup_chip_table(pdev->device, pdev->revision); if (!chip) { dev_info(&pdev->dev, "device not supported\n"); return -ENODEV; } memcpy(&device->chip, chip, sizeof(device->chip)); - device->chip.revision_id = revision; return 0; } @@ -1641,7 +1512,7 @@ static int __devinit sym_set_workarounds(struct sym_device *device) * We must ensure the chip will use WRITE AND INVALIDATE. * The revision number limit is for now arbitrary. */ - if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && chip->revision_id < 0x4) { + if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && pdev->revision < 0x4) { chip->features |= (FE_WRIE | FE_CLSE); } @@ -1769,8 +1640,9 @@ static void sym_config_pqs(struct pci_dev *pdev, struct sym_device *sym_dev) * Detach the host. * We have to free resources and halt the NCR chip. */ -static int sym_detach(struct sym_hcb *np, struct pci_dev *pdev) +static int sym_detach(struct Scsi_Host *shost, struct pci_dev *pdev) { + struct sym_hcb *np = sym_get_hcb(shost); printk("%s: detaching ...\n", sym_name(np)); del_timer_sync(&np->s.timer); @@ -1823,7 +1695,7 @@ static int __devinit sym2_probe(struct pci_dev *pdev, { struct sym_device sym_dev; struct sym_nvram nvram; - struct Scsi_Host *instance; + struct Scsi_Host *shost; memset(&sym_dev, 0, sizeof(sym_dev)); memset(&nvram, 0, sizeof(nvram)); @@ -1850,13 +1722,13 @@ static int __devinit sym2_probe(struct pci_dev *pdev, sym_get_nvram(&sym_dev, &nvram); - instance = sym_attach(&sym2_template, attach_count, &sym_dev); - if (!instance) + shost = sym_attach(&sym2_template, attach_count, &sym_dev); + if (!shost) goto free; - if (scsi_add_host(instance, &pdev->dev)) + if (scsi_add_host(shost, &pdev->dev)) goto detach; - scsi_scan_host(instance); + scsi_scan_host(shost); attach_count++; @@ -1874,20 +1746,143 @@ static int __devinit sym2_probe(struct pci_dev *pdev, static void __devexit sym2_remove(struct pci_dev *pdev) { - struct sym_hcb *np = pci_get_drvdata(pdev); - struct Scsi_Host *host = np->s.host; - - scsi_remove_host(host); - scsi_host_put(host); - - sym_detach(np, pdev); + struct Scsi_Host *shost = pci_get_drvdata(pdev); + scsi_remove_host(shost); + scsi_host_put(shost); + sym_detach(shost, pdev); pci_release_regions(pdev); pci_disable_device(pdev); attach_count--; } +/** + * sym2_io_error_detected() - called when PCI error is detected + * @pdev: pointer to PCI device + * @state: current state of the PCI slot + */ +static pci_ers_result_t sym2_io_error_detected(struct pci_dev *pdev, + enum pci_channel_state state) +{ + /* If slot is permanently frozen, turn everything off */ + if (state == pci_channel_io_perm_failure) { + sym2_remove(pdev); + return PCI_ERS_RESULT_DISCONNECT; + } + + disable_irq(pdev->irq); + pci_disable_device(pdev); + + /* Request that MMIO be enabled, so register dump can be taken. */ + return PCI_ERS_RESULT_CAN_RECOVER; +} + +/** + * sym2_io_slot_dump - Enable MMIO and dump debug registers + * @pdev: pointer to PCI device + */ +static pci_ers_result_t sym2_io_slot_dump(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + + sym_dump_registers(shost); + + /* Request a slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * sym2_reset_workarounds - hardware-specific work-arounds + * + * This routine is similar to sym_set_workarounds(), except + * that, at this point, we already know that the device was + * succesfully intialized at least once before, and so most + * of the steps taken there are un-needed here. + */ +static void sym2_reset_workarounds(struct pci_dev *pdev) +{ + u_short status_reg; + struct sym_chip *chip; + + chip = sym_lookup_chip_table(pdev->device, pdev->revision); + + /* Work around for errant bit in 895A, in a fashion + * similar to what is done in sym_set_workarounds(). + */ + pci_read_config_word(pdev, PCI_STATUS, &status_reg); + if (!(chip->features & FE_66MHZ) && (status_reg & PCI_STATUS_66MHZ)) { + status_reg = PCI_STATUS_66MHZ; + pci_write_config_word(pdev, PCI_STATUS, status_reg); + pci_read_config_word(pdev, PCI_STATUS, &status_reg); + } +} + +/** + * sym2_io_slot_reset() - called when the pci bus has been reset. + * @pdev: pointer to PCI device + * + * Restart the card from scratch. + */ +static pci_ers_result_t sym2_io_slot_reset(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct sym_hcb *np = sym_get_hcb(shost); + + printk(KERN_INFO "%s: recovering from a PCI slot reset\n", + sym_name(np)); + + if (pci_enable_device(pdev)) { + printk(KERN_ERR "%s: Unable to enable after PCI reset\n", + sym_name(np)); + return PCI_ERS_RESULT_DISCONNECT; + } + + pci_set_master(pdev); + enable_irq(pdev->irq); + + /* If the chip can do Memory Write Invalidate, enable it */ + if (np->features & FE_WRIE) { + if (pci_set_mwi(pdev)) + return PCI_ERS_RESULT_DISCONNECT; + } + + /* Perform work-arounds, analogous to sym_set_workarounds() */ + sym2_reset_workarounds(pdev); + + /* Perform host reset only on one instance of the card */ + if (PCI_FUNC(pdev->devfn) == 0) { + if (sym_reset_scsi_bus(np, 0)) { + printk(KERN_ERR "%s: Unable to reset scsi host\n", + sym_name(np)); + return PCI_ERS_RESULT_DISCONNECT; + } + sym_start_up(shost, 1); + } + + return PCI_ERS_RESULT_RECOVERED; +} + +/** + * sym2_io_resume() - resume normal ops after PCI reset + * @pdev: pointer to PCI device + * + * Called when the error recovery driver tells us that its + * OK to resume normal operation. Use completion to allow + * halted scsi ops to resume. + */ +static void sym2_io_resume(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct sym_data *sym_data = shost_priv(shost); + + spin_lock_irq(shost->host_lock); + if (sym_data->io_reset) + complete_all(sym_data->io_reset); + sym_data->io_reset = NULL; + spin_unlock_irq(shost->host_lock); +} + static void sym2_get_signalling(struct Scsi_Host *shost) { struct sym_hcb *np = sym_get_hcb(shost); @@ -2050,11 +2045,19 @@ static struct pci_device_id sym2_id_table[] __devinitdata = { MODULE_DEVICE_TABLE(pci, sym2_id_table); +static struct pci_error_handlers sym2_err_handler = { + .error_detected = sym2_io_error_detected, + .mmio_enabled = sym2_io_slot_dump, + .slot_reset = sym2_io_slot_reset, + .resume = sym2_io_resume, +}; + static struct pci_driver sym2_driver = { .name = NAME53C8XX, .id_table = sym2_id_table, .probe = sym2_probe, .remove = __devexit_p(sym2_remove), + .err_handler = &sym2_err_handler, }; static int __init sym2_init(void) diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.h b/drivers/scsi/sym53c8xx_2/sym_glue.h index 0f097ba..567fbe0 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.h +++ b/drivers/scsi/sym53c8xx_2/sym_glue.h @@ -40,7 +40,9 @@ #ifndef SYM_GLUE_H #define SYM_GLUE_H +#include <linux/completion.h> #include <linux/delay.h> +#include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/pci.h> #include <linux/string.h> @@ -177,14 +179,11 @@ struct sym_shcb { int unit; char inst_name[16]; char chip_name[8]; - struct pci_dev *device; struct Scsi_Host *host; void __iomem * ioaddr; /* MMIO kernel io address */ void __iomem * ramaddr; /* RAM kernel io address */ - u_short io_ws; /* IO window size */ - int irq; /* IRQ number */ struct timer_list timer; /* Timer handler link header */ u_long lasttime; @@ -212,20 +211,21 @@ struct sym_device { } s; struct sym_chip chip; struct sym_nvram *nvram; - u_short device_id; u_char host_id; }; /* * Driver host data structure. */ -struct host_data { +struct sym_data { struct sym_hcb *ncb; + struct completion *io_reset; /* PCI error handling */ + struct pci_dev *pdev; }; static inline struct sym_hcb * sym_get_hcb(struct Scsi_Host *host) { - return ((struct host_data *)host->hostdata)->ncb; + return ((struct sym_data *)host->hostdata)->ncb; } #include "sym_fw.h" @@ -263,8 +263,8 @@ void sym_set_cam_result_error(struct sym_hcb *np, struct sym_ccb *cp, int resid) void sym_xpt_done(struct sym_hcb *np, struct scsi_cmnd *ccb); #define sym_print_addr(cmd, arg...) dev_info(&cmd->device->sdev_gendev , ## arg) void sym_xpt_async_bus_reset(struct sym_hcb *np); -void sym_xpt_async_sent_bdr(struct sym_hcb *np, int target); int sym_setup_data_and_start (struct sym_hcb *np, struct scsi_cmnd *csio, struct sym_ccb *cp); -void sym_log_bus_error(struct sym_hcb *np); +void sym_log_bus_error(struct Scsi_Host *); +void sym_dump_registers(struct Scsi_Host *); #endif /* SYM_GLUE_H */ diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index 21cd4c7..463f119 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -52,7 +52,7 @@ * Needed function prototypes. */ static void sym_int_ma (struct sym_hcb *np); -static void sym_int_sir (struct sym_hcb *np); +static void sym_int_sir(struct sym_hcb *); static struct sym_ccb *sym_alloc_ccb(struct sym_hcb *np); static struct sym_ccb *sym_ccb_from_dsa(struct sym_hcb *np, u32 dsa); static void sym_alloc_lcb_tags (struct sym_hcb *np, u_char tn, u_char ln); @@ -684,6 +684,8 @@ static void sym_set_bus_mode(struct sym_hcb *np, struct sym_nvram *nvram) */ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, struct sym_nvram *nvram) { + struct sym_data *sym_data = shost_priv(shost); + struct pci_dev *pdev = sym_data->pdev; u_char burst_max; u32 period; int i; @@ -778,19 +780,12 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru * 64 bit addressing (895A/896/1010) ? */ if (np->features & FE_DAC) { -#if SYM_CONF_DMA_ADDRESSING_MODE == 0 - np->rv_ccntl1 |= (DDAC); -#elif SYM_CONF_DMA_ADDRESSING_MODE == 1 - if (!np->use_dac) - np->rv_ccntl1 |= (DDAC); - else - np->rv_ccntl1 |= (XTIMOD | EXTIBMV); -#elif SYM_CONF_DMA_ADDRESSING_MODE == 2 - if (!np->use_dac) - np->rv_ccntl1 |= (DDAC); - else - np->rv_ccntl1 |= (0 | EXTIBMV); -#endif + if (!use_dac(np)) + np->rv_ccntl1 |= (DDAC); + else if (SYM_CONF_DMA_ADDRESSING_MODE == 1) + np->rv_ccntl1 |= (XTIMOD | EXTIBMV); + else if (SYM_CONF_DMA_ADDRESSING_MODE == 2) + np->rv_ccntl1 |= (0 | EXTIBMV); } /* @@ -804,8 +799,8 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru * In dual channel mode, contention occurs if internal cycles * are used. Disable internal cycles. */ - if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 && - np->revision_id < 0x1) + if (pdev->device == PCI_DEVICE_ID_LSI_53C1010_33 && + pdev->revision < 0x1) np->rv_ccntl0 |= DILS; /* @@ -828,10 +823,10 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru * this driver. The generic ncr driver that does not use * LOAD/STORE instructions does not need this work-around. */ - if ((np->device_id == PCI_DEVICE_ID_NCR_53C810 && - np->revision_id >= 0x10 && np->revision_id <= 0x11) || - (np->device_id == PCI_DEVICE_ID_NCR_53C860 && - np->revision_id <= 0x1)) + if ((pdev->device == PCI_DEVICE_ID_NCR_53C810 && + pdev->revision >= 0x10 && pdev->revision <= 0x11) || + (pdev->device == PCI_DEVICE_ID_NCR_53C860 && + pdev->revision <= 0x1)) np->features &= ~(FE_WRIE|FE_ERL|FE_ERMP); /* @@ -897,7 +892,7 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru if ((SYM_SETUP_SCSI_LED || (nvram->type == SYM_SYMBIOS_NVRAM || (nvram->type == SYM_TEKRAM_NVRAM && - np->device_id == PCI_DEVICE_ID_NCR_53C895))) && + pdev->device == PCI_DEVICE_ID_NCR_53C895))) && !(np->features & FE_LEDC) && !(np->sv_gpcntl & 0x01)) np->features |= FE_LED0; @@ -1135,8 +1130,9 @@ restart_test: * First 24 register of the chip: * r0..rf */ -static void sym_log_hard_error(struct sym_hcb *np, u_short sist, u_char dstat) +static void sym_log_hard_error(struct Scsi_Host *shost, u_short sist, u_char dstat) { + struct sym_hcb *np = sym_get_hcb(shost); u32 dsp; int script_ofs; int script_size; @@ -1180,16 +1176,27 @@ static void sym_log_hard_error(struct sym_hcb *np, u_short sist, u_char dstat) scr_to_cpu((int) *(u32 *)(script_base + script_ofs))); } - printf ("%s: regdump:", sym_name(np)); - for (i=0; i<24;i++) - printf (" %02x", (unsigned)INB_OFF(np, i)); - printf (".\n"); + printf("%s: regdump:", sym_name(np)); + for (i = 0; i < 24; i++) + printf(" %02x", (unsigned)INB_OFF(np, i)); + printf(".\n"); /* * PCI BUS error. */ if (dstat & (MDPE|BF)) - sym_log_bus_error(np); + sym_log_bus_error(shost); +} + +void sym_dump_registers(struct Scsi_Host *shost) +{ + struct sym_hcb *np = sym_get_hcb(shost); + u_short sist; + u_char dstat; + + sist = INW(np, nc_sist); + dstat = INB(np, nc_dstat); + sym_log_hard_error(shost, sist, dstat); } static struct sym_chip sym_dev_table[] = { @@ -1312,7 +1319,7 @@ int sym_lookup_dmap(struct sym_hcb *np, u32 h, int s) { int i; - if (!np->use_dac) + if (!use_dac(np)) goto weird; /* Look up existing mappings */ @@ -1519,7 +1526,8 @@ void sym_put_start_queue(struct sym_hcb *np, struct sym_ccb *cp) np->squeueput = qidx; if (DEBUG_FLAGS & DEBUG_QUEUE) - printf ("%s: queuepos=%d.\n", sym_name (np), np->squeueput); + scmd_printk(KERN_DEBUG, cp->cmd, "queuepos=%d\n", + np->squeueput); /* * Script processor may be waiting for reselect. @@ -1696,8 +1704,11 @@ static void sym_flush_busy_queue (struct sym_hcb *np, int cam_status) * 1: SCSI BUS RESET delivered or received. * 2: SCSI BUS MODE changed. */ -void sym_start_up (struct sym_hcb *np, int reason) +void sym_start_up(struct Scsi_Host *shost, int reason) { + struct sym_data *sym_data = shost_priv(shost); + struct pci_dev *pdev = sym_data->pdev; + struct sym_hcb *np = sym_data->ncb; int i; u32 phys; @@ -1746,7 +1757,7 @@ void sym_start_up (struct sym_hcb *np, int reason) * This also let point to first position the start * and done queue pointers used from SCRIPTS. */ - np->fw_patch(np); + np->fw_patch(shost); /* * Wakeup all pending jobs. @@ -1788,7 +1799,7 @@ void sym_start_up (struct sym_hcb *np, int reason) /* * For now, disable AIP generation on C1010-66. */ - if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_66) + if (pdev->device == PCI_DEVICE_ID_LSI_53C1010_66) OUTB(np, nc_aipcntl1, DISAIP); /* @@ -1798,8 +1809,8 @@ void sym_start_up (struct sym_hcb *np, int reason) * that from SCRIPTS for each selection/reselection, but * I just don't want. :) */ - if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 && - np->revision_id < 1) + if (pdev->device == PCI_DEVICE_ID_LSI_53C1010_33 && + pdev->revision < 1) OUTB(np, nc_stest1, INB(np, nc_stest1) | 0x30); /* @@ -1807,9 +1818,9 @@ void sym_start_up (struct sym_hcb *np, int reason) * Disable overlapped arbitration for some dual function devices, * regardless revision id (kind of post-chip-design feature. ;-)) */ - if (np->device_id == PCI_DEVICE_ID_NCR_53C875) + if (pdev->device == PCI_DEVICE_ID_NCR_53C875) OUTB(np, nc_ctest0, (1<<5)); - else if (np->device_id == PCI_DEVICE_ID_NCR_53C896) + else if (pdev->device == PCI_DEVICE_ID_NCR_53C896) np->rv_ccntl0 |= DPR; /* @@ -1827,7 +1838,7 @@ void sym_start_up (struct sym_hcb *np, int reason) * Set up scratch C and DRS IO registers to map the 32 bit * DMA address range our data structures are located in. */ - if (np->use_dac) { + if (use_dac(np)) { np->dmap_bah[0] = 0; /* ??? */ OUTL(np, nc_scrx[0], np->dmap_bah[0]); OUTL(np, nc_drs, np->dmap_bah[0]); @@ -1900,7 +1911,7 @@ void sym_start_up (struct sym_hcb *np, int reason) if (sym_verbose >= 2) printf("%s: Downloading SCSI SCRIPTS.\n", sym_name(np)); memcpy_toio(np->s.ramaddr, np->scripta0, np->scripta_sz); - if (np->ram_ws == 8192) { + if (np->features & FE_RAM8K) { memcpy_toio(np->s.ramaddr + 4096, np->scriptb0, np->scriptb_sz); phys = scr_to_cpu(np->scr_ram_seg); OUTL(np, nc_mmws, phys); @@ -2214,8 +2225,9 @@ static void sym_int_udc (struct sym_hcb *np) * mode to eight bit asynchronous, etc... * So, just reinitializing all except chip should be enough. */ -static void sym_int_sbmc (struct sym_hcb *np) +static void sym_int_sbmc(struct Scsi_Host *shost) { + struct sym_hcb *np = sym_get_hcb(shost); u_char scsi_mode = INB(np, nc_stest4) & SMODE; /* @@ -2228,7 +2240,7 @@ static void sym_int_sbmc (struct sym_hcb *np) * Should suspend command processing for a few seconds and * reinitialize all except the chip. */ - sym_start_up (np, 2); + sym_start_up(shost, 2); } /* @@ -2756,8 +2768,11 @@ reset_all: * Use at your own decision and risk. */ -void sym_interrupt (struct sym_hcb *np) +irqreturn_t sym_interrupt(struct Scsi_Host *shost) { + struct sym_data *sym_data = shost_priv(shost); + struct sym_hcb *np = sym_data->ncb; + struct pci_dev *pdev = sym_data->pdev; u_char istat, istatc; u_char dstat; u_short sist; @@ -2782,7 +2797,7 @@ void sym_interrupt (struct sym_hcb *np) } if (!(istat & (SIP|DIP))) - return; + return (istat & INTF) ? IRQ_HANDLED : IRQ_NONE; #if 0 /* We should never get this one */ if (istat & CABRT) @@ -2809,6 +2824,13 @@ void sym_interrupt (struct sym_hcb *np) dstat |= INB(np, nc_dstat); istatc = INB(np, nc_istat); istat |= istatc; + + /* Prevent deadlock waiting on a condition that may + * never clear. */ + if (unlikely(sist == 0xffff && dstat == 0xff)) { + if (pci_channel_offline(pdev)) + return IRQ_NONE; + } } while (istatc & (SIP|DIP)); if (DEBUG_FLAGS & DEBUG_TINY) @@ -2842,10 +2864,10 @@ void sym_interrupt (struct sym_hcb *np) !(dstat & (MDPE|BF|ABRT|IID))) { if (sist & PAR) sym_int_par (np, sist); else if (sist & MA) sym_int_ma (np); - else if (dstat & SIR) sym_int_sir (np); + else if (dstat & SIR) sym_int_sir(np); else if (dstat & SSI) OUTONB_STD(); else goto unknown_int; - return; + return IRQ_HANDLED; } /* @@ -2861,8 +2883,8 @@ void sym_interrupt (struct sym_hcb *np) */ if (sist & RST) { printf("%s: SCSI BUS reset detected.\n", sym_name(np)); - sym_start_up (np, 1); - return; + sym_start_up(shost, 1); + return IRQ_HANDLED; } OUTB(np, nc_ctest3, np->rv_ctest3 | CLF); /* clear dma fifo */ @@ -2870,11 +2892,11 @@ void sym_interrupt (struct sym_hcb *np) if (!(sist & (GEN|HTH|SGE)) && !(dstat & (MDPE|BF|ABRT|IID))) { - if (sist & SBMC) sym_int_sbmc (np); + if (sist & SBMC) sym_int_sbmc(shost); else if (sist & STO) sym_int_sto (np); else if (sist & UDC) sym_int_udc (np); else goto unknown_int; - return; + return IRQ_HANDLED; } /* @@ -2884,12 +2906,12 @@ void sym_interrupt (struct sym_hcb *np) * Reset everything. */ - sym_log_hard_error(np, sist, dstat); + sym_log_hard_error(shost, sist, dstat); if ((sist & (GEN|HTH|SGE)) || (dstat & (MDPE|BF|ABRT|IID))) { sym_start_reset(np); - return; + return IRQ_HANDLED; } unknown_int: @@ -2900,6 +2922,7 @@ unknown_int: printf( "%s: unknown interrupt(s) ignored, " "ISTAT=0x%x DSTAT=0x%x SIST=0x%x\n", sym_name(np), istat, dstat, sist); + return IRQ_NONE; } /* @@ -3520,7 +3543,8 @@ static void sym_sir_task_recovery(struct sym_hcb *np, int num) * If we sent a BDR, make upper layer aware of that. */ if (np->abrt_msg[0] == M_RESET) - sym_xpt_async_sent_bdr(np, target); + starget_printk(KERN_NOTICE, starget, + "has been reset\n"); break; } @@ -4304,7 +4328,7 @@ static void sym_nego_rejected(struct sym_hcb *np, struct sym_tcb *tp, struct sym /* * chip exception handler for programmed interrupts. */ -static void sym_int_sir (struct sym_hcb *np) +static void sym_int_sir(struct sym_hcb *np) { u_char num = INB(np, nc_dsps); u32 dsa = INL(np, nc_dsa); @@ -4343,31 +4367,30 @@ static void sym_int_sir (struct sym_hcb *np) return; /* * The device didn't go to MSG OUT phase after having - * been selected with ATN. We donnot want to handle - * that. + * been selected with ATN. We do not want to handle that. */ case SIR_SEL_ATN_NO_MSG_OUT: - printf ("%s:%d: No MSG OUT phase after selection with ATN.\n", - sym_name (np), target); + scmd_printk(KERN_WARNING, cp->cmd, + "No MSG OUT phase after selection with ATN\n"); goto out_stuck; /* * The device didn't switch to MSG IN phase after - * having reseleted the initiator. + * having reselected the initiator. */ case SIR_RESEL_NO_MSG_IN: - printf ("%s:%d: No MSG IN phase after reselection.\n", - sym_name (np), target); + scmd_printk(KERN_WARNING, cp->cmd, + "No MSG IN phase after reselection\n"); goto out_stuck; /* * After reselection, the device sent a message that wasn't * an IDENTIFY. */ case SIR_RESEL_NO_IDENTIFY: - printf ("%s:%d: No IDENTIFY after reselection.\n", - sym_name (np), target); + scmd_printk(KERN_WARNING, cp->cmd, + "No IDENTIFY after reselection\n"); goto out_stuck; /* - * The device reselected a LUN we donnot know about. + * The device reselected a LUN we do not know about. */ case SIR_RESEL_BAD_LUN: np->msgout[0] = M_RESET; @@ -4380,8 +4403,7 @@ static void sym_int_sir (struct sym_hcb *np) np->msgout[0] = M_ABORT; goto out; /* - * The device reselected for a tagged nexus that we donnot - * have. + * The device reselected for a tagged nexus that we do not have. */ case SIR_RESEL_BAD_I_T_L_Q: np->msgout[0] = M_ABORT_TAG; @@ -4393,8 +4415,8 @@ static void sym_int_sir (struct sym_hcb *np) case SIR_RESEL_ABORTED: np->lastmsg = np->msgout[0]; np->msgout[0] = M_NOOP; - printf ("%s:%d: message %x sent on bad reselection.\n", - sym_name (np), target, np->lastmsg); + scmd_printk(KERN_WARNING, cp->cmd, + "message %x sent on bad reselection\n", np->lastmsg); goto out; /* * The SCRIPTS let us know that a message has been @@ -5578,16 +5600,13 @@ int sym_hcb_attach(struct Scsi_Host *shost, struct sym_fw *fw, struct sym_nvram np->scriptz_ba = vtobus(np->scriptz0); if (np->ram_ba) { - np->scripta_ba = np->ram_ba; + np->scripta_ba = np->ram_ba; if (np->features & FE_RAM8K) { - np->ram_ws = 8192; np->scriptb_ba = np->scripta_ba + 4096; #if 0 /* May get useful for 64 BIT PCI addressing */ np->scr_ram_seg = cpu_to_scr(np->scripta_ba >> 32); #endif } - else - np->ram_ws = 4096; } /* diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h index 79ab6a1..ad07880 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.h +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h @@ -883,10 +883,7 @@ struct sym_hcb { * Physical bus addresses of the chip. */ u32 mmio_ba; /* MMIO 32 bit BUS address */ - int mmio_ws; /* MMIO Window size */ - u32 ram_ba; /* RAM 32 bit BUS address */ - int ram_ws; /* RAM window size */ /* * SCRIPTS virtual and physical bus addresses. @@ -912,14 +909,12 @@ struct sym_hcb { struct sym_fwb_ba fwb_bas; /* Useful SCRIPTB bus addresses */ struct sym_fwz_ba fwz_bas; /* Useful SCRIPTZ bus addresses */ void (*fw_setup)(struct sym_hcb *np, struct sym_fw *fw); - void (*fw_patch)(struct sym_hcb *np); + void (*fw_patch)(struct Scsi_Host *); char *fw_name; /* * General controller parameters and configuration. */ - u_short device_id; /* PCI device id */ - u_char revision_id; /* PCI device revision id */ u_int features; /* Chip features map */ u_char myaddr; /* SCSI id of the adapter */ u_char maxburst; /* log base 2 of dwords burst */ @@ -1031,6 +1026,14 @@ struct sym_hcb { #endif }; +#if SYM_CONF_DMA_ADDRESSING_MODE == 0 +#define use_dac(np) 0 +#define set_dac(np) do { } while (0) +#else +#define use_dac(np) (np)->use_dac +#define set_dac(np) (np)->use_dac = 1 +#endif + #define HCB_BA(np, lbl) (np->hcb_ba + offsetof(struct sym_hcb, lbl)) @@ -1052,8 +1055,8 @@ void sym_start_next_ccbs(struct sym_hcb *np, struct sym_lcb *lp, int maxn); #else void sym_put_start_queue(struct sym_hcb *np, struct sym_ccb *cp); #endif -void sym_start_up(struct sym_hcb *np, int reason); -void sym_interrupt(struct sym_hcb *np); +void sym_start_up(struct Scsi_Host *, int reason); +irqreturn_t sym_interrupt(struct Scsi_Host *); int sym_clear_tasks(struct sym_hcb *np, int cam_status, int target, int lun, int task); struct sym_ccb *sym_get_ccb(struct sym_hcb *np, struct scsi_cmnd *cmd, u_char tag_order); void sym_free_ccb(struct sym_hcb *np, struct sym_ccb *cp); @@ -1073,18 +1076,21 @@ int sym_hcb_attach(struct Scsi_Host *shost, struct sym_fw *fw, struct sym_nvram */ #if SYM_CONF_DMA_ADDRESSING_MODE == 0 +#define DMA_DAC_MASK DMA_32BIT_MASK #define sym_build_sge(np, data, badd, len) \ do { \ (data)->addr = cpu_to_scr(badd); \ (data)->size = cpu_to_scr(len); \ } while (0) #elif SYM_CONF_DMA_ADDRESSING_MODE == 1 +#define DMA_DAC_MASK DMA_40BIT_MASK #define sym_build_sge(np, data, badd, len) \ do { \ (data)->addr = cpu_to_scr(badd); \ (data)->size = cpu_to_scr((((badd) >> 8) & 0xff000000) + len); \ } while (0) #elif SYM_CONF_DMA_ADDRESSING_MODE == 2 +#define DMA_DAC_MASK DMA_64BIT_MASK int sym_lookup_dmap(struct sym_hcb *np, u32 h, int s); static __inline void sym_build_sge(struct sym_hcb *np, struct sym_tblmove *data, u64 badd, int len) diff --git a/drivers/scsi/sym53c8xx_2/sym_nvram.c b/drivers/scsi/sym53c8xx_2/sym_nvram.c index 15d6929..5662fbb 100644 --- a/drivers/scsi/sym53c8xx_2/sym_nvram.c +++ b/drivers/scsi/sym53c8xx_2/sym_nvram.c @@ -696,7 +696,7 @@ static int sym_read_Tekram_nvram (struct sym_device *np, Tekram_nvram *nvram) u_short csum; int x; - switch (np->device_id) { + switch (np->pdev->device) { case PCI_DEVICE_ID_NCR_53C885: case PCI_DEVICE_ID_NCR_53C895: case PCI_DEVICE_ID_NCR_53C896: |
