1 files changed, 285 insertions, 89 deletions

diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 92329a4..5510df8 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -189,6 +189,78 @@ static int qla4xxx_init_local_data(struct scsi_qla_host *ha)
 	return qla4xxx_get_firmware_status(ha);
 }
 
+static uint8_t
+qla4xxx_wait_for_ip_config(struct scsi_qla_host *ha)
+{
+	uint8_t ipv4_wait = 0;
+	uint8_t ipv6_wait = 0;
+	int8_t ip_address[IPv6_ADDR_LEN] = {0} ;
+
+	/* If both IPv4 & IPv6 are enabled, possibly only one
+	 * IP address may be acquired, so check to see if we
+	 * need to wait for another */
+	if (is_ipv4_enabled(ha) && is_ipv6_enabled(ha)) {
+		if (((ha->addl_fw_state & FW_ADDSTATE_DHCPv4_ENABLED) != 0) &&
+		    ((ha->addl_fw_state &
+				    FW_ADDSTATE_DHCPv4_LEASE_ACQUIRED) == 0)) {
+			ipv4_wait = 1;
+		}
+		if (((ha->ipv6_addl_options &
+			    IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE) != 0) &&
+		    ((ha->ipv6_link_local_state == IP_ADDRSTATE_ACQUIRING) ||
+		     (ha->ipv6_addr0_state == IP_ADDRSTATE_ACQUIRING) ||
+		     (ha->ipv6_addr1_state == IP_ADDRSTATE_ACQUIRING))) {
+
+			ipv6_wait = 1;
+
+			if ((ha->ipv6_link_local_state ==
+						     IP_ADDRSTATE_PREFERRED) ||
+			    (ha->ipv6_addr0_state == IP_ADDRSTATE_PREFERRED) ||
+			    (ha->ipv6_addr1_state == IP_ADDRSTATE_PREFERRED)) {
+				DEBUG2(printk(KERN_INFO "scsi%ld: %s: "
+					      "Preferred IP configured."
+					      " Don't wait!\n", ha->host_no,
+					      __func__));
+				ipv6_wait = 0;
+			}
+			if (memcmp(&ha->ipv6_default_router_addr, ip_address,
+				IPv6_ADDR_LEN) == 0) {
+				DEBUG2(printk(KERN_INFO "scsi%ld: %s: "
+					      "No Router configured. "
+					      "Don't wait!\n", ha->host_no,
+					      __func__));
+				ipv6_wait = 0;
+			}
+			if ((ha->ipv6_default_router_state ==
+						IPV6_RTRSTATE_MANUAL) &&
+			    (ha->ipv6_link_local_state ==
+						IP_ADDRSTATE_TENTATIVE) &&
+			    (memcmp(&ha->ipv6_link_local_addr,
+				    &ha->ipv6_default_router_addr, 4) == 0)) {
+				DEBUG2(printk("scsi%ld: %s: LinkLocal Router & "
+					"IP configured. Don't wait!\n",
+					ha->host_no, __func__));
+				ipv6_wait = 0;
+			}
+		}
+		if (ipv4_wait || ipv6_wait) {
+			DEBUG2(printk("scsi%ld: %s: Wait for additional "
+				      "IP(s) \"", ha->host_no, __func__));
+			if (ipv4_wait)
+				DEBUG2(printk("IPv4 "));
+			if (ha->ipv6_link_local_state == IP_ADDRSTATE_ACQUIRING)
+				DEBUG2(printk("IPv6LinkLocal "));
+			if (ha->ipv6_addr0_state == IP_ADDRSTATE_ACQUIRING)
+				DEBUG2(printk("IPv6Addr0 "));
+			if (ha->ipv6_addr1_state == IP_ADDRSTATE_ACQUIRING)
+				DEBUG2(printk("IPv6Addr1 "));
+			DEBUG2(printk("\"\n"));
+		}
+	}
+
+	return ipv4_wait|ipv6_wait;
+}
+
 static int qla4xxx_fw_ready(struct scsi_qla_host *ha)
 {
 	uint32_t timeout_count;
@@ -226,38 +298,80 @@ static int qla4xxx_fw_ready(struct scsi_qla_host *ha)
 			continue;
 		}
 
+		if (ha->firmware_state & FW_STATE_WAIT_AUTOCONNECT) {
+			DEBUG2(printk(KERN_INFO "scsi%ld: %s: fwstate:"
+				      "AUTOCONNECT in progress\n",
+				      ha->host_no, __func__));
+		}
+
+		if (ha->firmware_state & FW_STATE_CONFIGURING_IP) {
+			DEBUG2(printk(KERN_INFO "scsi%ld: %s: fwstate:"
+				      " CONFIGURING IP\n",
+				      ha->host_no, __func__));
+			/*
+			 * Check for link state after 15 secs and if link is
+			 * still DOWN then, cable is unplugged. Ignore "DHCP
+			 * in Progress/CONFIGURING IP" bit to check if firmware
+			 * is in ready state or not after 15 secs.
+			 * This is applicable for both 2.x & 3.x firmware
+			 */
+			if (timeout_count <= (ADAPTER_INIT_TOV - 15)) {
+				if (ha->addl_fw_state & FW_ADDSTATE_LINK_UP) {
+					DEBUG2(printk(KERN_INFO "scsi%ld: %s:"
+						  " LINK UP (Cable plugged)\n",
+						  ha->host_no, __func__));
+				} else if (ha->firmware_state &
+					  (FW_STATE_CONFIGURING_IP |
+							     FW_STATE_READY)) {
+					DEBUG2(printk(KERN_INFO "scsi%ld: %s: "
+						"LINK DOWN (Cable unplugged)\n",
+						ha->host_no, __func__));
+					ha->firmware_state = FW_STATE_READY;
+				}
+			}
+		}
+
 		if (ha->firmware_state == FW_STATE_READY) {
-			DEBUG2(dev_info(&ha->pdev->dev, "Firmware Ready..\n"));
-			/* The firmware is ready to process SCSI commands. */
-			DEBUG2(dev_info(&ha->pdev->dev,
-					  "scsi%ld: %s: MEDIA TYPE - %s\n",
-					  ha->host_no,
-					  __func__, (ha->addl_fw_state &
-						     FW_ADDSTATE_OPTICAL_MEDIA)
-					  != 0 ? "OPTICAL" : "COPPER"));
-			DEBUG2(dev_info(&ha->pdev->dev,
-					  "scsi%ld: %s: DHCP STATE Enabled "
-					  "%s\n",
-					  ha->host_no, __func__,
-					  (ha->addl_fw_state &
-					   FW_ADDSTATE_DHCP_ENABLED) != 0 ?
-					  "YES" : "NO"));
-			DEBUG2(dev_info(&ha->pdev->dev,
-					  "scsi%ld: %s: LINK %s\n",
-					  ha->host_no, __func__,
-					  (ha->addl_fw_state &
-					   FW_ADDSTATE_LINK_UP) != 0 ?
-					  "UP" : "DOWN"));
-			DEBUG2(dev_info(&ha->pdev->dev,
-					  "scsi%ld: %s: iSNS Service "
-					  "Started %s\n",
-					  ha->host_no, __func__,
-					  (ha->addl_fw_state &
-					   FW_ADDSTATE_ISNS_SVC_ENABLED) != 0 ?
-					  "YES" : "NO"));
-
-			ready = 1;
-			break;
+			/* If DHCP IP Addr is available, retrieve it now. */
+			if (test_and_clear_bit(DPC_GET_DHCP_IP_ADDR,
+								&ha->dpc_flags))
+				qla4xxx_get_dhcp_ip_address(ha);
+
+			if (!qla4xxx_wait_for_ip_config(ha) ||
+							timeout_count == 1) {
+				DEBUG2(dev_info(&ha->pdev->dev,
+						"Firmware Ready..\n"));
+				/* The firmware is ready to process SCSI
+				   commands. */
+				DEBUG2(dev_info(&ha->pdev->dev,
+					"scsi%ld: %s: MEDIA TYPE"
+					" - %s\n", ha->host_no,
+					__func__, (ha->addl_fw_state &
+					FW_ADDSTATE_OPTICAL_MEDIA)
+					!= 0 ? "OPTICAL" : "COPPER"));
+				DEBUG2(dev_info(&ha->pdev->dev,
+					"scsi%ld: %s: DHCPv4 STATE"
+					" Enabled %s\n", ha->host_no,
+					 __func__, (ha->addl_fw_state &
+					 FW_ADDSTATE_DHCPv4_ENABLED) != 0 ?
+					"YES" : "NO"));
+				DEBUG2(dev_info(&ha->pdev->dev,
+					"scsi%ld: %s: LINK %s\n",
+					ha->host_no, __func__,
+					(ha->addl_fw_state &
+					 FW_ADDSTATE_LINK_UP) != 0 ?
+					"UP" : "DOWN"));
+				DEBUG2(dev_info(&ha->pdev->dev,
+					"scsi%ld: %s: iSNS Service "
+					"Started %s\n",
+					ha->host_no, __func__,
+					(ha->addl_fw_state &
+					 FW_ADDSTATE_ISNS_SVC_ENABLED) != 0 ?
+					"YES" : "NO"));
+
+				ready = 1;
+				break;
+			}
 		}
 		DEBUG2(printk("scsi%ld: %s: waiting on fw, state=%x:%x - "
 			      "seconds expired= %d\n", ha->host_no, __func__,
@@ -272,15 +386,19 @@ static int qla4xxx_fw_ready(struct scsi_qla_host *ha)
 		msleep(1000);
 	}			/* end of for */
 
-	if (timeout_count == 0)
+	if (timeout_count <= 0)
 		DEBUG2(printk("scsi%ld: %s: FW Initialization timed out!\n",
 			      ha->host_no, __func__));
 
-	if (ha->firmware_state & FW_STATE_DHCP_IN_PROGRESS)  {
-		DEBUG2(printk("scsi%ld: %s: FW is reporting its waiting to"
-			      " grab an IP address from DHCP server\n",
-			      ha->host_no, __func__));
+	if (ha->firmware_state & FW_STATE_CONFIGURING_IP) {
+		DEBUG2(printk("scsi%ld: %s: FW initialized, but is reporting "
+			      "it's waiting to configure an IP address\n",
+			       ha->host_no, __func__));
 		ready = 1;
+	} else if (ha->firmware_state & FW_STATE_WAIT_AUTOCONNECT) {
+		DEBUG2(printk("scsi%ld: %s: FW initialized, but "
+			      "auto-discovery still in process\n",
+			       ha->host_no, __func__));
 	}
 
 	return ready;
@@ -387,6 +505,7 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha,
 	struct dev_db_entry *fw_ddb_entry = NULL;
 	dma_addr_t fw_ddb_entry_dma;
 	int status = QLA_ERROR;
+	uint32_t conn_err;
 
 	if (ddb_entry == NULL) {
 		DEBUG2(printk("scsi%ld: %s: ddb_entry is NULL\n", ha->host_no,
@@ -407,7 +526,7 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha,
 
 	if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, fw_ddb_entry,
 				    fw_ddb_entry_dma, NULL, NULL,
-				    &ddb_entry->fw_ddb_device_state, NULL,
+				    &ddb_entry->fw_ddb_device_state, &conn_err,
 				    &ddb_entry->tcp_source_port_num,
 				    &ddb_entry->connection_id) ==
 	    QLA_ERROR) {
@@ -419,6 +538,7 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha,
 	}
 
 	status = QLA_SUCCESS;
+	ddb_entry->options = le16_to_cpu(fw_ddb_entry->options);
 	ddb_entry->target_session_id = le16_to_cpu(fw_ddb_entry->tsid);
 	ddb_entry->task_mgmt_timeout =
 		le16_to_cpu(fw_ddb_entry->def_timeout);
@@ -442,11 +562,44 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha,
 	memcpy(&ddb_entry->ip_addr[0], &fw_ddb_entry->ip_addr[0],
 	       min(sizeof(ddb_entry->ip_addr), sizeof(fw_ddb_entry->ip_addr)));
 
-	DEBUG2(printk("scsi%ld: %s: ddb[%d] - State= %x status= %d.\n",
-		      ha->host_no, __func__, fw_ddb_index,
-		      ddb_entry->fw_ddb_device_state, status));
-
- exit_update_ddb:
+	ddb_entry->iscsi_max_burst_len = fw_ddb_entry->iscsi_max_burst_len;
+	ddb_entry->iscsi_max_outsnd_r2t = fw_ddb_entry->iscsi_max_outsnd_r2t;
+	ddb_entry->iscsi_first_burst_len = fw_ddb_entry->iscsi_first_burst_len;
+	ddb_entry->iscsi_max_rcv_data_seg_len =
+				fw_ddb_entry->iscsi_max_rcv_data_seg_len;
+	ddb_entry->iscsi_max_snd_data_seg_len =
+				fw_ddb_entry->iscsi_max_snd_data_seg_len;
+
+	if (ddb_entry->options & DDB_OPT_IPV6_DEVICE) {
+		memcpy(&ddb_entry->remote_ipv6_addr,
+			fw_ddb_entry->ip_addr,
+			min(sizeof(ddb_entry->remote_ipv6_addr),
+			sizeof(fw_ddb_entry->ip_addr)));
+		memcpy(&ddb_entry->link_local_ipv6_addr,
+			fw_ddb_entry->link_local_ipv6_addr,
+			min(sizeof(ddb_entry->link_local_ipv6_addr),
+			sizeof(fw_ddb_entry->link_local_ipv6_addr)));
+
+		DEBUG2(dev_info(&ha->pdev->dev, "%s: DDB[%d] osIdx = %d "
+					"State %04x ConnErr %08x IP %pI6 "
+					":%04d \"%s\"\n",
+					__func__, fw_ddb_index,
+					ddb_entry->os_target_id,
+					ddb_entry->fw_ddb_device_state,
+					conn_err, fw_ddb_entry->ip_addr,
+					le16_to_cpu(fw_ddb_entry->port),
+					fw_ddb_entry->iscsi_name));
+	} else
+		DEBUG2(dev_info(&ha->pdev->dev, "%s: DDB[%d] osIdx = %d "
+					"State %04x ConnErr %08x IP %pI4 "
+					":%04d \"%s\"\n",
+					__func__, fw_ddb_index,
+					ddb_entry->os_target_id,
+					ddb_entry->fw_ddb_device_state,
+					conn_err, fw_ddb_entry->ip_addr,
+					le16_to_cpu(fw_ddb_entry->port),
+					fw_ddb_entry->iscsi_name));
+exit_update_ddb:
 	if (fw_ddb_entry)
 		dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
 				  fw_ddb_entry, fw_ddb_entry_dma);
@@ -492,6 +645,40 @@ static struct ddb_entry * qla4xxx_alloc_ddb(struct scsi_qla_host *ha,
 }
 
 /**
+ * qla4_is_relogin_allowed - Are we allowed to login?
+ * @ha: Pointer to host adapter structure.
+ * @conn_err: Last connection error associated with the ddb
+ *
+ * This routine tests the given connection error to determine if
+ * we are allowed to login.
+ **/
+int qla4_is_relogin_allowed(struct scsi_qla_host *ha, uint32_t conn_err)
+{
+	uint32_t err_code, login_rsp_sts_class;
+	int relogin = 1;
+
+	err_code = ((conn_err & 0x00ff0000) >> 16);
+	login_rsp_sts_class = ((conn_err & 0x0000ff00) >> 8);
+	if (err_code == 0x1c || err_code == 0x06) {
+		DEBUG2(dev_info(&ha->pdev->dev,
+				": conn_err=0x%08x, send target completed"
+				" or access denied failure\n", conn_err));
+		relogin = 0;
+	}
+	if ((err_code == 0x08) && (login_rsp_sts_class == 0x02)) {
+		/* Login Response PDU returned an error.
+		   Login Response Status in Error Code Detail
+		   indicates login should not be retried.*/
+		DEBUG2(dev_info(&ha->pdev->dev,
+				": conn_err=0x%08x, do not retry relogin\n",
+				conn_err));
+		relogin = 0;
+	}
+
+	return relogin;
+}
+
+/**
  * qla4xxx_configure_ddbs - builds driver ddb list
  * @ha: Pointer to host adapter structure.
  *
@@ -505,18 +692,30 @@ static int qla4xxx_build_ddb_list(struct scsi_qla_host *ha)
 	uint32_t fw_ddb_index = 0;
 	uint32_t next_fw_ddb_index = 0;
 	uint32_t ddb_state;
-	uint32_t conn_err, err_code;
+	uint32_t conn_err;
 	struct ddb_entry *ddb_entry;
+	struct dev_db_entry *fw_ddb_entry = NULL;
+	dma_addr_t fw_ddb_entry_dma;
+	uint32_t ipv6_device;
 	uint32_t new_tgt;
 
+	fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
+			&fw_ddb_entry_dma, GFP_KERNEL);
+	if (fw_ddb_entry == NULL) {
+		DEBUG2(dev_info(&ha->pdev->dev, "%s: DMA alloc failed\n",
+				__func__));
+		return QLA_ERROR;
+	}
+
 	dev_info(&ha->pdev->dev, "Initializing DDBs ...\n");
 	for (fw_ddb_index = 0; fw_ddb_index < MAX_DDB_ENTRIES;
 	     fw_ddb_index = next_fw_ddb_index) {
 		/* First, let's see if a device exists here */
-		if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, NULL, 0, NULL,
-					    &next_fw_ddb_index, &ddb_state,
-					    &conn_err, NULL, NULL) ==
-		    QLA_ERROR) {
+		if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, fw_ddb_entry,
+					    0, NULL, &next_fw_ddb_index,
+					    &ddb_state, &conn_err,
+					    NULL, NULL) ==
+					    QLA_ERROR) {
 			DEBUG2(printk("scsi%ld: %s: get_ddb_entry, "
 				      "fw_ddb_index %d failed", ha->host_no,
 				      __func__, fw_ddb_index));
@@ -533,18 +732,19 @@ static int qla4xxx_build_ddb_list(struct scsi_qla_host *ha)
 			/* Try and login to device */
 			DEBUG2(printk("scsi%ld: %s: Login to DDB[%d]\n",
 				      ha->host_no, __func__, fw_ddb_index));
-			err_code = ((conn_err & 0x00ff0000) >> 16);
-			if (err_code == 0x1c || err_code == 0x06) {
-				DEBUG2(printk("scsi%ld: %s send target "
-					      "completed "
-					      "or access denied failure\n",
-					      ha->host_no, __func__));
-			} else {
+			ipv6_device = le16_to_cpu(fw_ddb_entry->options) &
+					DDB_OPT_IPV6_DEVICE;
+			if (qla4_is_relogin_allowed(ha, conn_err) &&
+					((!ipv6_device &&
+					  *((uint32_t *)fw_ddb_entry->ip_addr))
+					 || ipv6_device)) {
 				qla4xxx_set_ddb_entry(ha, fw_ddb_index, 0);
 				if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index,
-					NULL, 0, NULL, &next_fw_ddb_index,
-					&ddb_state, &conn_err, NULL, NULL)
-					== QLA_ERROR) {
+							NULL, 0, NULL,
+							&next_fw_ddb_index,
+							&ddb_state, &conn_err,
+							NULL, NULL)
+						== QLA_ERROR) {
 					DEBUG2(printk("scsi%ld: %s:"
 						"get_ddb_entry %d failed\n",
 						ha->host_no,
@@ -599,7 +799,6 @@ next_one:
 struct qla4_relog_scan {
 	int halt_wait;
 	uint32_t conn_err;
-	uint32_t err_code;
 	uint32_t fw_ddb_index;
 	uint32_t next_fw_ddb_index;
 	uint32_t fw_ddb_device_state;
@@ -609,18 +808,7 @@ static int qla4_test_rdy(struct scsi_qla_host *ha, struct qla4_relog_scan *rs)
 {
 	struct ddb_entry *ddb_entry;
 
-	/*
-	 * Don't want to do a relogin if connection
-	 * error is 0x1c.
-	 */
-	rs->err_code = ((rs->conn_err & 0x00ff0000) >> 16);
-	if (rs->err_code == 0x1c || rs->err_code == 0x06) {
-		DEBUG2(printk(
-			       "scsi%ld: %s send target"
-			       " completed or "
-			       "access denied failure\n",
-			       ha->host_no, __func__));
-	} else {
+	if (qla4_is_relogin_allowed(ha, rs->conn_err)) {
 		/* We either have a device that is in
 		 * the process of relogging in or a
 		 * device that is waiting to be
@@ -908,7 +1096,7 @@ static void qla4x00_pci_config(struct scsi_qla_host *ha)
 static int qla4xxx_start_firmware_from_flash(struct scsi_qla_host *ha)
 {
 	int status = QLA_ERROR;
-	uint32_t max_wait_time;
+	unsigned long max_wait_time;
 	unsigned long flags;
 	uint32_t mbox_status;
 
@@ -940,7 +1128,10 @@ static int qla4xxx_start_firmware_from_flash(struct scsi_qla_host *ha)
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
 	/* Wait for firmware to come UP. */
-	max_wait_time = FIRMWARE_UP_TOV * 4;
+	DEBUG2(printk(KERN_INFO "scsi%ld: %s: Wait up to %d seconds for "
+		      "boot firmware to complete...\n",
+		      ha->host_no, __func__, FIRMWARE_UP_TOV));
+	max_wait_time = jiffies + (FIRMWARE_UP_TOV * HZ);
 	do {
 		uint32_t ctrl_status;
 
@@ -954,16 +1145,15 @@ static int qla4xxx_start_firmware_from_flash(struct scsi_qla_host *ha)
 		if (mbox_status == MBOX_STS_COMMAND_COMPLETE)
 			break;
 
-		DEBUG2(printk("scsi%ld: %s: Waiting for boot firmware to "
-			      "complete... ctrl_sts=0x%x, remaining=%d\n",
-			      ha->host_no, __func__, ctrl_status,
-			      max_wait_time));
+		DEBUG2(printk(KERN_INFO "scsi%ld: %s: Waiting for boot "
+			      "firmware to complete... ctrl_sts=0x%x\n",
+			      ha->host_no, __func__, ctrl_status));
 
-		msleep(250);
-	} while ((max_wait_time--));
+		msleep_interruptible(250);
+	} while (!time_after_eq(jiffies, max_wait_time));
 
 	if (mbox_status == MBOX_STS_COMMAND_COMPLETE) {
-		DEBUG(printk("scsi%ld: %s: Firmware has started\n",
+		DEBUG(printk(KERN_INFO "scsi%ld: %s: Firmware has started\n",
 			     ha->host_no, __func__));
 
 		spin_lock_irqsave(&ha->hardware_lock, flags);
@@ -1141,6 +1331,7 @@ int qla4xxx_initialize_adapter(struct scsi_qla_host *ha,
 	int status = QLA_ERROR;
 	int8_t ip_address[IP_ADDR_LEN] = {0} ;
 
+	clear_bit(AF_ONLINE, &ha->flags);
 	ha->eeprom_cmd_data = 0;
 
 	qla4x00_pci_config(ha);
@@ -1166,7 +1357,7 @@ int qla4xxx_initialize_adapter(struct scsi_qla_host *ha,
 	 * the ddb_list and wait for DHCP lease acquired aen to come in
 	 * followed by 0x8014 aen" to trigger the tgt discovery process.
 	 */
-	if (ha->firmware_state & FW_STATE_DHCP_IN_PROGRESS)
+	if (ha->firmware_state & FW_STATE_CONFIGURING_IP)
 		goto exit_init_online;
 
 	/* Skip device discovery if ip and subnet is zero */
@@ -1270,8 +1461,8 @@ static void qla4xxx_add_device_dynamically(struct scsi_qla_host *ha,
  *
  * This routine processes a Decive Database Changed AEN Event.
  **/
-int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha,
-				uint32_t fw_ddb_index, uint32_t state)
+int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
+		uint32_t state, uint32_t conn_err)
 {
 	struct ddb_entry * ddb_entry;
 	uint32_t old_fw_ddb_device_state;
@@ -1318,19 +1509,24 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha,
 		 * the device came back.
 		 */
 	} else {
-		/* Device went away, try to relogin. */
-		/* Mark device missing */
-		if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE)
+		/* Device went away, mark device missing */
+		if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE) {
+			DEBUG2(dev_info(&ha->pdev->dev, "%s mark missing "
+					"ddb_entry 0x%p sess 0x%p conn 0x%p\n",
+					__func__, ddb_entry,
+					ddb_entry->sess, ddb_entry->conn));
 			qla4xxx_mark_device_missing(ha, ddb_entry);
+		}
+
 		/*
 		 * Relogin if device state changed to a not active state.
-		 * However, do not relogin if this aen is a result of an IOCTL
-		 * logout (DF_NO_RELOGIN) or if this is a discovered device.
+		 * However, do not relogin if a RELOGIN is in process, or
+		 * we are not allowed to relogin to this DDB.
 		 */
 		if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_FAILED &&
 		    !test_bit(DF_RELOGIN, &ddb_entry->flags) &&
 		    !test_bit(DF_NO_RELOGIN, &ddb_entry->flags) &&
-		    !test_bit(DF_ISNS_DISCOVERED, &ddb_entry->flags)) {
+		    qla4_is_relogin_allowed(ha, conn_err)) {
 			/*
 			 * This triggers a relogin.  After the relogin_timer
 			 * expires, the relogin gets scheduled.	 We must wait a
@@ -1338,7 +1534,7 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha,
 			 * with failed device_state or a logout response before
 			 * we can issue another relogin.
 			 */
-			/* Firmware padds this timeout: (time2wait +1).
+			/* Firmware pads this timeout: (time2wait +1).
 			 * Driver retry to login should be longer than F/W.
 			 * Otherwise F/W will fail
 			 * set_ddb() mbx cmd with 0x4005 since it still