summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla4xxx/ql4_init.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qla4xxx/ql4_init.c')
-rw-r--r--drivers/scsi/qla4xxx/ql4_init.c50
1 files changed, 25 insertions, 25 deletions
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 539546df..5fc19c4 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -297,7 +297,7 @@ static int qla4xxx_fw_ready(struct scsi_qla_host *ha)
uint32_t timeout_count;
int ready = 0;
- DEBUG2(dev_info(&ha->pdev->dev, "Waiting for Firmware Ready..\n"));
+ DEBUG2(ql4_printk(KERN_INFO, ha, "Waiting for Firmware Ready..\n"));
for (timeout_count = ADAPTER_INIT_TOV; timeout_count > 0;
timeout_count--) {
if (test_and_clear_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags))
@@ -370,29 +370,29 @@ static int qla4xxx_fw_ready(struct scsi_qla_host *ha)
if (!qla4xxx_wait_for_ip_config(ha) ||
timeout_count == 1) {
- DEBUG2(dev_info(&ha->pdev->dev,
- "Firmware Ready..\n"));
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "Firmware Ready..\n"));
/* The firmware is ready to process SCSI
commands. */
- DEBUG2(dev_info(&ha->pdev->dev,
+ DEBUG2(ql4_printk(KERN_INFO, ha,
"scsi%ld: %s: MEDIA TYPE"
" - %s\n", ha->host_no,
__func__, (ha->addl_fw_state &
FW_ADDSTATE_OPTICAL_MEDIA)
!= 0 ? "OPTICAL" : "COPPER"));
- DEBUG2(dev_info(&ha->pdev->dev,
+ DEBUG2(ql4_printk(KERN_INFO, ha,
"scsi%ld: %s: DHCPv4 STATE"
" Enabled %s\n", ha->host_no,
__func__, (ha->addl_fw_state &
FW_ADDSTATE_DHCPv4_ENABLED) != 0 ?
"YES" : "NO"));
- DEBUG2(dev_info(&ha->pdev->dev,
+ DEBUG2(ql4_printk(KERN_INFO, ha,
"scsi%ld: %s: LINK %s\n",
ha->host_no, __func__,
(ha->addl_fw_state &
FW_ADDSTATE_LINK_UP) != 0 ?
"UP" : "DOWN"));
- DEBUG2(dev_info(&ha->pdev->dev,
+ DEBUG2(ql4_printk(KERN_INFO, ha,
"scsi%ld: %s: iSNS Service "
"Started %s\n",
ha->host_no, __func__,
@@ -445,7 +445,7 @@ static int qla4xxx_init_firmware(struct scsi_qla_host *ha)
{
int status = QLA_ERROR;
- dev_info(&ha->pdev->dev, "Initializing firmware..\n");
+ ql4_printk(KERN_INFO, ha, "Initializing firmware..\n");
if (qla4xxx_initialize_fw_cb(ha) == QLA_ERROR) {
DEBUG2(printk("scsi%ld: %s: Failed to initialize firmware "
"control block\n", ha->host_no, __func__));
@@ -694,18 +694,18 @@ int qla4_is_relogin_allowed(struct scsi_qla_host *ha, uint32_t conn_err)
err_code = ((conn_err & 0x00ff0000) >> 16);
login_rsp_sts_class = ((conn_err & 0x0000ff00) >> 8);
if (err_code == 0x1c || err_code == 0x06) {
- DEBUG2(dev_info(&ha->pdev->dev,
- ": conn_err=0x%08x, send target completed"
- " or access denied failure\n", conn_err));
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ ": conn_err=0x%08x, send target completed"
+ " or access denied failure\n", conn_err));
relogin = 0;
}
if ((err_code == 0x08) && (login_rsp_sts_class == 0x02)) {
/* Login Response PDU returned an error.
Login Response Status in Error Code Detail
indicates login should not be retried.*/
- DEBUG2(dev_info(&ha->pdev->dev,
- ": conn_err=0x%08x, do not retry relogin\n",
- conn_err));
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ ": conn_err=0x%08x, do not retry relogin\n",
+ conn_err));
relogin = 0;
}
@@ -736,13 +736,13 @@ static int qla4xxx_build_ddb_list(struct scsi_qla_host *ha)
fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
&fw_ddb_entry_dma, GFP_KERNEL);
if (fw_ddb_entry == NULL) {
- DEBUG2(dev_info(&ha->pdev->dev, "%s: DMA alloc failed\n",
+ DEBUG2(ql4_printk(KERN_INFO, ha, "%s: DMA alloc failed\n",
__func__));
goto exit_build_ddb_list_no_free;
}
- dev_info(&ha->pdev->dev, "Initializing DDBs ...\n");
+ ql4_printk(KERN_INFO, ha, "Initializing DDBs ...\n");
for (fw_ddb_index = 0; fw_ddb_index < MAX_DDB_ENTRIES;
fw_ddb_index = next_fw_ddb_index) {
/* First, let's see if a device exists here */
@@ -826,7 +826,7 @@ next_one:
}
status = QLA_SUCCESS;
- dev_info(&ha->pdev->dev, "DDB list done..\n");
+ ql4_printk(KERN_INFO, ha, "DDB list done..\n");
exit_build_ddb_list:
dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), fw_ddb_entry,
@@ -1080,17 +1080,17 @@ static int qla4xxx_config_nvram(struct scsi_qla_host *ha)
}
/* Get EEPRom Parameters from NVRAM and validate */
- dev_info(&ha->pdev->dev, "Configuring NVRAM ...\n");
+ ql4_printk(KERN_INFO, ha, "Configuring NVRAM ...\n");
if (qla4xxx_is_nvram_configuration_valid(ha) == QLA_SUCCESS) {
spin_lock_irqsave(&ha->hardware_lock, flags);
extHwConfig.Asuint32_t =
rd_nvram_word(ha, eeprom_ext_hw_conf_offset(ha));
spin_unlock_irqrestore(&ha->hardware_lock, flags);
} else {
- dev_warn(&ha->pdev->dev,
- "scsi%ld: %s: EEProm checksum invalid. "
- "Please update your EEPROM\n", ha->host_no,
- __func__);
+ ql4_printk(KERN_WARNING, ha,
+ "scsi%ld: %s: EEProm checksum invalid. "
+ "Please update your EEPROM\n", ha->host_no,
+ __func__);
/* Attempt to set defaults */
if (is_qla4010(ha))
@@ -1128,7 +1128,7 @@ void qla4xxx_pci_config(struct scsi_qla_host *ha)
uint16_t w;
int status;
- dev_info(&ha->pdev->dev, "Configuring PCI space...\n");
+ ql4_printk(KERN_INFO, ha, "Configuring PCI space...\n");
pci_set_master(ha->pdev);
status = pci_set_mwi(ha->pdev);
@@ -1150,7 +1150,7 @@ static int qla4xxx_start_firmware_from_flash(struct scsi_qla_host *ha)
unsigned long flags;
uint32_t mbox_status;
- dev_info(&ha->pdev->dev, "Starting firmware ...\n");
+ ql4_printk(KERN_INFO, ha, "Starting firmware ...\n");
/*
* Start firmware from flash ROM
@@ -1569,7 +1569,7 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
} else {
/* Device went away, mark device missing */
if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE) {
- DEBUG2(dev_info(&ha->pdev->dev, "%s mark missing "
+ DEBUG2(ql4_printk(KERN_INFO, ha, "%s mark missing "
"ddb_entry 0x%p sess 0x%p conn 0x%p\n",
__func__, ddb_entry,
ddb_entry->sess, ddb_entry->conn));
OpenPOWER on IntegriCloud