summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla2xxx
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qla2xxx')
-rw-r--r--drivers/scsi/qla2xxx/qla_dbg.c71
-rw-r--r--drivers/scsi/qla2xxx/qla_dbg.h2
2 files changed, 32 insertions, 41 deletions
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index ba72e16..16939a9 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -296,23 +296,13 @@ qla24xx_read_window(struct device_reg_24xx __iomem *reg, uint32_t iobase,
return buf;
}
-int
+void
qla24xx_pause_risc(struct device_reg_24xx __iomem *reg)
{
- int rval = QLA_SUCCESS;
- uint32_t cnt;
-
WRT_REG_DWORD(&reg->hccr, HCCRX_SET_RISC_PAUSE);
- for (cnt = 30000;
- ((RD_REG_DWORD(&reg->host_status) & HSRX_RISC_PAUSED) == 0) &&
- rval == QLA_SUCCESS; cnt--) {
- if (cnt)
- udelay(100);
- else
- rval = QLA_FUNCTION_TIMEOUT;
- }
- return rval;
+ /* 100 usec delay is sufficient enough for hardware to pause RISC */
+ udelay(100);
}
int
@@ -320,10 +310,14 @@ qla24xx_soft_reset(struct qla_hw_data *ha)
{
int rval = QLA_SUCCESS;
uint32_t cnt;
- uint16_t mb0, wd;
+ uint16_t wd;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
- /* Reset RISC. */
+ /*
+ * Reset RISC. The delay is dependent on system architecture.
+ * Driver can proceed with the reset sequence after waiting
+ * for a timeout period.
+ */
WRT_REG_DWORD(&reg->ctrl_status, CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
for (cnt = 0; cnt < 30000; cnt++) {
if ((RD_REG_DWORD(&reg->ctrl_status) & CSRX_DMA_ACTIVE) == 0)
@@ -337,13 +331,6 @@ qla24xx_soft_reset(struct qla_hw_data *ha)
pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);
udelay(100);
- /* Wait for firmware to complete NVRAM accesses. */
- mb0 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
- for (cnt = 10000 ; cnt && mb0; cnt--) {
- udelay(5);
- mb0 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
- barrier();
- }
/* Wait for soft-reset to complete. */
for (cnt = 0; cnt < 30000; cnt++) {
@@ -356,10 +343,10 @@ qla24xx_soft_reset(struct qla_hw_data *ha)
WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_RESET);
RD_REG_DWORD(&reg->hccr); /* PCI Posting. */
- for (cnt = 30000; RD_REG_WORD(&reg->mailbox0) != 0 &&
+ for (cnt = 10000; RD_REG_WORD(&reg->mailbox0) != 0 &&
rval == QLA_SUCCESS; cnt--) {
if (cnt)
- udelay(100);
+ udelay(10);
else
rval = QLA_FUNCTION_TIMEOUT;
}
@@ -1075,10 +1062,11 @@ qla24xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
fw->host_status = htonl(RD_REG_DWORD(&reg->host_status));
- /* Pause RISC. */
- rval = qla24xx_pause_risc(reg);
- if (rval != QLA_SUCCESS)
- goto qla24xx_fw_dump_failed_0;
+ /*
+ * Pause RISC. No need to track timeout, as resetting the chip
+ * is the right approach incase of pause timeout
+ */
+ qla24xx_pause_risc(reg);
/* Host interface registers. */
dmp_reg = &reg->flash_addr;
@@ -1325,10 +1313,11 @@ qla25xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
fw->host_status = htonl(RD_REG_DWORD(&reg->host_status));
- /* Pause RISC. */
- rval = qla24xx_pause_risc(reg);
- if (rval != QLA_SUCCESS)
- goto qla25xx_fw_dump_failed_0;
+ /*
+ * Pause RISC. No need to track timeout, as resetting the chip
+ * is the right approach incase of pause timeout
+ */
+ qla24xx_pause_risc(reg);
/* Host/Risc registers. */
iter_reg = fw->host_risc_reg;
@@ -1641,10 +1630,11 @@ qla81xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
fw->host_status = htonl(RD_REG_DWORD(&reg->host_status));
- /* Pause RISC. */
- rval = qla24xx_pause_risc(reg);
- if (rval != QLA_SUCCESS)
- goto qla81xx_fw_dump_failed_0;
+ /*
+ * Pause RISC. No need to track timeout, as resetting the chip
+ * is the right approach incase of pause timeout
+ */
+ qla24xx_pause_risc(reg);
/* Host/Risc registers. */
iter_reg = fw->host_risc_reg;
@@ -1959,10 +1949,11 @@ qla83xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
fw->host_status = htonl(RD_REG_DWORD(&reg->host_status));
- /* Pause RISC. */
- rval = qla24xx_pause_risc(reg);
- if (rval != QLA_SUCCESS)
- goto qla83xx_fw_dump_failed_0;
+ /*
+ * Pause RISC. No need to track timeout, as resetting the chip
+ * is the right approach incase of pause timeout
+ */
+ qla24xx_pause_risc(reg);
WRT_REG_DWORD(&reg->iobase_addr, 0x6000);
dmp_reg = &reg->iobase_window;
diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h
index cc96104..3679b73 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.h
+++ b/drivers/scsi/qla2xxx/qla_dbg.h
@@ -353,5 +353,5 @@ extern int qla27xx_dump_mpi_ram(struct qla_hw_data *, uint32_t, uint32_t *,
uint32_t, void **);
extern int qla24xx_dump_ram(struct qla_hw_data *, uint32_t, uint32_t *,
uint32_t, void **);
-extern int qla24xx_pause_risc(struct device_reg_24xx __iomem *);
+extern void qla24xx_pause_risc(struct device_reg_24xx __iomem *);
extern int qla24xx_soft_reset(struct qla_hw_data *);
OpenPOWER on IntegriCloud