diff options
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_os.c')
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_os.c | 90 |
1 files changed, 82 insertions, 8 deletions
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 2f873d2..209f50e 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -475,11 +475,11 @@ qla2xxx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) srb_t *sp; int rval; - if (unlikely(pci_channel_offline(ha->pdev))) { - if (ha->pdev->error_state == pci_channel_io_frozen) - cmd->result = DID_REQUEUE << 16; - else + if (ha->flags.eeh_busy) { + if (ha->flags.pci_channel_io_perm_failure) cmd->result = DID_NO_CONNECT << 16; + else + cmd->result = DID_REQUEUE << 16; goto qc24_fail_command; } @@ -552,8 +552,15 @@ qla2x00_eh_wait_on_command(struct scsi_cmnd *cmd) #define ABORT_POLLING_PERIOD 1000 #define ABORT_WAIT_ITER ((10 * 1000) / (ABORT_POLLING_PERIOD)) unsigned long wait_iter = ABORT_WAIT_ITER; + scsi_qla_host_t *vha = shost_priv(cmd->device->host); + struct qla_hw_data *ha = vha->hw; int ret = QLA_SUCCESS; + if (unlikely(pci_channel_offline(ha->pdev)) || ha->flags.eeh_busy) { + DEBUG17(qla_printk(KERN_WARNING, ha, "return:eh_wait\n")); + return ret; + } + while (CMD_SP(cmd) && wait_iter--) { msleep(ABORT_POLLING_PERIOD); } @@ -1810,6 +1817,13 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) /* Set ISP-type information. */ qla2x00_set_isp_flags(ha); + + /* Set EEH reset type to fundamental if required by hba */ + if ( IS_QLA24XX(ha) || IS_QLA25XX(ha) || IS_QLA81XX(ha)) { + pdev->needs_freset = 1; + pci_save_state(pdev); + } + /* Configure PCI I/O space */ ret = qla2x00_iospace_config(ha); if (ret) @@ -2174,6 +2188,24 @@ qla2x00_free_device(scsi_qla_host_t *vha) { struct qla_hw_data *ha = vha->hw; + qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16); + + /* Disable timer */ + if (vha->timer_active) + qla2x00_stop_timer(vha); + + /* Kill the kernel thread for this host */ + if (ha->dpc_thread) { + struct task_struct *t = ha->dpc_thread; + + /* + * qla2xxx_wake_dpc checks for ->dpc_thread + * so we need to zero it out. + */ + ha->dpc_thread = NULL; + kthread_stop(t); + } + qla25xx_delete_queues(vha); if (ha->flags.fce_enabled) @@ -2185,6 +2217,8 @@ qla2x00_free_device(scsi_qla_host_t *vha) /* Stop currently executing firmware. */ qla2x00_try_to_stop_firmware(vha); + vha->flags.online = 0; + /* turn-off interrupts on the card */ if (ha->interrupts_on) ha->isp_ops->disable_intrs(ha); @@ -2859,6 +2893,13 @@ qla2x00_do_dpc(void *data) if (!base_vha->flags.init_done) continue; + if (ha->flags.eeh_busy) { + DEBUG17(qla_printk(KERN_WARNING, ha, + "qla2x00_do_dpc: dpc_flags: %lx\n", + base_vha->dpc_flags)); + continue; + } + DEBUG3(printk("scsi(%ld): DPC handler\n", base_vha->host_no)); ha->dpc_active = 1; @@ -3049,8 +3090,13 @@ qla2x00_timer(scsi_qla_host_t *vha) int index; srb_t *sp; int t; + uint16_t w; struct qla_hw_data *ha = vha->hw; struct req_que *req; + + /* Hardware read to raise pending EEH errors during mailbox waits. */ + if (!pci_channel_offline(ha->pdev)) + pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w); /* * Ports - Port down timer. * @@ -3252,16 +3298,23 @@ qla2x00_release_firmware(void) static pci_ers_result_t qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state) { - scsi_qla_host_t *base_vha = pci_get_drvdata(pdev); + scsi_qla_host_t *vha = pci_get_drvdata(pdev); + struct qla_hw_data *ha = vha->hw; + + DEBUG2(qla_printk(KERN_WARNING, ha, "error_detected:state %x\n", + state)); switch (state) { case pci_channel_io_normal: + ha->flags.eeh_busy = 0; return PCI_ERS_RESULT_CAN_RECOVER; case pci_channel_io_frozen: + ha->flags.eeh_busy = 1; pci_disable_device(pdev); return PCI_ERS_RESULT_NEED_RESET; case pci_channel_io_perm_failure: - qla2x00_abort_all_cmds(base_vha, DID_NO_CONNECT << 16); + ha->flags.pci_channel_io_perm_failure = 1; + qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16); return PCI_ERS_RESULT_DISCONNECT; } return PCI_ERS_RESULT_NEED_RESET; @@ -3312,6 +3365,8 @@ qla2xxx_pci_slot_reset(struct pci_dev *pdev) struct qla_hw_data *ha = base_vha->hw; int rc; + DEBUG17(qla_printk(KERN_WARNING, ha, "slot_reset\n")); + if (ha->mem_only) rc = pci_enable_device_mem(pdev); else @@ -3320,19 +3375,33 @@ qla2xxx_pci_slot_reset(struct pci_dev *pdev) if (rc) { qla_printk(KERN_WARNING, ha, "Can't re-enable PCI device after reset.\n"); - return ret; } - pci_set_master(pdev); if (ha->isp_ops->pci_config(base_vha)) return ret; +#ifdef QL_DEBUG_LEVEL_17 + { + uint8_t b; + uint32_t i; + + printk("slot_reset_1: "); + for (i = 0; i < 256; i++) { + pci_read_config_byte(ha->pdev, i, &b); + printk("%s%02x", (i%16) ? " " : "\n", b); + } + printk("\n"); + } +#endif set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); if (qla2x00_abort_isp(base_vha) == QLA_SUCCESS) ret = PCI_ERS_RESULT_RECOVERED; clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); + DEBUG17(qla_printk(KERN_WARNING, ha, + "slot_reset-return:ret=%x\n", ret)); + return ret; } @@ -3343,12 +3412,17 @@ qla2xxx_pci_resume(struct pci_dev *pdev) struct qla_hw_data *ha = base_vha->hw; int ret; + DEBUG17(qla_printk(KERN_WARNING, ha, "pci_resume\n")); + ret = qla2x00_wait_for_hba_online(base_vha); if (ret != QLA_SUCCESS) { qla_printk(KERN_ERR, ha, "the device failed to resume I/O " "from slot/link_reset"); } + + ha->flags.eeh_busy = 0; + pci_cleanup_aer_uncorrect_error_status(pdev); } |
