summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla2xxx/qla_init.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_init.c')
-rw-r--r--drivers/scsi/qla2xxx/qla_init.c49
1 files changed, 23 insertions, 26 deletions
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 27b7f92..226bec0 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -195,6 +195,7 @@ qla2100_pci_config(scsi_qla_host_t *ha)
{
uint16_t w, mwi;
unsigned long flags;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
qla_printk(KERN_INFO, ha, "Configuring PCI space...\n");
@@ -215,7 +216,7 @@ qla2100_pci_config(scsi_qla_host_t *ha)
/* Get PCI bus information. */
spin_lock_irqsave(&ha->hardware_lock, flags);
- ha->pci_attr = RD_REG_WORD(&ha->iobase->ctrl_status);
+ ha->pci_attr = RD_REG_WORD(&reg->ctrl_status);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return QLA_SUCCESS;
@@ -233,6 +234,7 @@ qla2300_pci_config(scsi_qla_host_t *ha)
uint16_t w, mwi;
unsigned long flags = 0;
uint32_t cnt;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
qla_printk(KERN_INFO, ha, "Configuring PCI space...\n");
@@ -259,34 +261,32 @@ qla2300_pci_config(scsi_qla_host_t *ha)
spin_lock_irqsave(&ha->hardware_lock, flags);
/* Pause RISC. */
- WRT_REG_WORD(&ha->iobase->hccr, HCCR_PAUSE_RISC);
+ WRT_REG_WORD(&reg->hccr, HCCR_PAUSE_RISC);
for (cnt = 0; cnt < 30000; cnt++) {
- if ((RD_REG_WORD(&ha->iobase->hccr) &
- HCCR_RISC_PAUSE) != 0)
+ if ((RD_REG_WORD(&reg->hccr) & HCCR_RISC_PAUSE) != 0)
break;
udelay(10);
}
/* Select FPM registers. */
- WRT_REG_WORD(&ha->iobase->ctrl_status, 0x20);
- RD_REG_WORD(&ha->iobase->ctrl_status);
+ WRT_REG_WORD(&reg->ctrl_status, 0x20);
+ RD_REG_WORD(&reg->ctrl_status);
/* Get the fb rev level */
- ha->fb_rev = RD_FB_CMD_REG(ha, ha->iobase);
+ ha->fb_rev = RD_FB_CMD_REG(ha, reg);
if (ha->fb_rev == FPM_2300)
w &= ~PCI_COMMAND_INVALIDATE;
/* Deselect FPM registers. */
- WRT_REG_WORD(&ha->iobase->ctrl_status, 0x0);
- RD_REG_WORD(&ha->iobase->ctrl_status);
+ WRT_REG_WORD(&reg->ctrl_status, 0x0);
+ RD_REG_WORD(&reg->ctrl_status);
/* Release RISC module. */
- WRT_REG_WORD(&ha->iobase->hccr, HCCR_RELEASE_RISC);
+ WRT_REG_WORD(&reg->hccr, HCCR_RELEASE_RISC);
for (cnt = 0; cnt < 30000; cnt++) {
- if ((RD_REG_WORD(&ha->iobase->hccr) &
- HCCR_RISC_PAUSE) == 0)
+ if ((RD_REG_WORD(&reg->hccr) & HCCR_RISC_PAUSE) == 0)
break;
udelay(10);
@@ -305,7 +305,7 @@ qla2300_pci_config(scsi_qla_host_t *ha)
/* Get PCI bus information. */
spin_lock_irqsave(&ha->hardware_lock, flags);
- ha->pci_attr = RD_REG_WORD(&ha->iobase->ctrl_status);
+ ha->pci_attr = RD_REG_WORD(&reg->ctrl_status);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return QLA_SUCCESS;
@@ -352,7 +352,7 @@ void
qla2x00_reset_chip(scsi_qla_host_t *ha)
{
unsigned long flags = 0;
- device_reg_t __iomem *reg = ha->iobase;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
uint32_t cnt;
unsigned long mbx_flags = 0;
uint16_t cmd;
@@ -505,7 +505,7 @@ int
qla2x00_chip_diag(scsi_qla_host_t *ha)
{
int rval;
- device_reg_t __iomem *reg = ha->iobase;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
unsigned long flags = 0;
uint16_t data;
uint32_t cnt;
@@ -889,7 +889,7 @@ qla2x00_update_fw_options(scsi_qla_host_t *ha)
void
qla2x00_config_rings(struct scsi_qla_host *ha)
{
- device_reg_t __iomem *reg = ha->iobase;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
/* Setup ring parameters in initialization control block. */
ha->init_cb->request_q_outpointer = __constant_cpu_to_le16(0);
@@ -1196,7 +1196,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
init_cb_t *icb = ha->init_cb;
nvram_t *nv = (nvram_t *)ha->request_ring;
uint16_t *wptr = (uint16_t *)ha->request_ring;
- device_reg_t __iomem *reg = ha->iobase;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
uint8_t timer_mode;
rval = QLA_SUCCESS;
@@ -1389,8 +1389,6 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
/*
* Set host adapter parameters.
*/
- ha->nvram_version = nv->nvram_version;
-
ha->flags.disable_risc_code_load = ((nv->host_p[0] & BIT_4) ? 1 : 0);
/* Always load RISC code on non ISP2[12]00 chips. */
if (!IS_QLA2100(ha) && !IS_QLA2200(ha))
@@ -1410,7 +1408,8 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
ha->serial0 = icb->port_name[5];
ha->serial1 = icb->port_name[6];
ha->serial2 = icb->port_name[7];
- memcpy(ha->node_name, icb->node_name, WWN_SIZE);
+ ha->node_name = icb->node_name;
+ ha->port_name = icb->port_name;
icb->execution_throttle = __constant_cpu_to_le16(0xFFFF);
@@ -2158,7 +2157,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports)
loop_id = ha->min_external_loopid;
for (; loop_id <= ha->last_loop_id; loop_id++) {
- if (RESERVED_LOOP_ID(loop_id))
+ if (qla2x00_is_reserved_id(ha, loop_id))
continue;
if (atomic_read(&ha->loop_down_timer) ||
@@ -2328,7 +2327,7 @@ qla2x00_find_new_loop_id(scsi_qla_host_t *ha, fc_port_t *dev)
}
/* Skip reserved loop IDs. */
- while (RESERVED_LOOP_ID(dev->loop_id)) {
+ while (qla2x00_is_reserved_id(ha, dev->loop_id)) {
dev->loop_id++;
}
@@ -2888,7 +2887,7 @@ static int
qla2x00_restart_isp(scsi_qla_host_t *ha)
{
uint8_t status = 0;
- device_reg_t __iomem *reg = ha->iobase;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
unsigned long flags = 0;
uint32_t wait_time;
@@ -2901,8 +2900,6 @@ qla2x00_restart_isp(scsi_qla_host_t *ha)
goto done;
}
- reg = ha->iobase;
-
spin_lock_irqsave(&ha->hardware_lock, flags);
/* Disable SRAM, Instruction RAM and GP RAM parity. */
@@ -2973,7 +2970,7 @@ void
qla2x00_reset_adapter(scsi_qla_host_t *ha)
{
unsigned long flags = 0;
- device_reg_t __iomem *reg = ha->iobase;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
ha->flags.online = 0;
ha->isp_ops.disable_intrs(ha);
OpenPOWER on IntegriCloud