summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla2xxx/qla_init.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_init.c')
-rw-r--r--drivers/scsi/qla2xxx/qla_init.c295
1 files changed, 281 insertions, 14 deletions
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 52ed56e..2d4f32b 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -552,10 +552,6 @@ qla24xx_reset_risc(scsi_qla_host_t *vha)
d2 = RD_REG_DWORD(&reg->ctrl_status);
barrier();
}
- if (cnt == 0 || hw_evt)
- qla2xxx_hw_event_log(vha, HW_EVENT_RESET_ERR,
- RD_REG_WORD(&reg->mailbox1), RD_REG_WORD(&reg->mailbox2),
- RD_REG_WORD(&reg->mailbox3));
WRT_REG_DWORD(&reg->hccr, HCCRX_SET_RISC_RESET);
RD_REG_DWORD(&reg->hccr);
@@ -574,6 +570,9 @@ qla24xx_reset_risc(scsi_qla_host_t *vha)
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ if (IS_NOPOLLING_TYPE(ha))
+ ha->isp_ops->enable_intrs(ha);
}
/**
@@ -779,16 +778,19 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *vha)
mem_size = (ha->fw_memory_size - 0x11000 + 1) *
sizeof(uint16_t);
} else if (IS_FWI2_CAPABLE(ha)) {
- fixed_size = IS_QLA25XX(ha) ?
- offsetof(struct qla25xx_fw_dump, ext_mem) :
- offsetof(struct qla24xx_fw_dump, ext_mem);
+ if (IS_QLA81XX(ha))
+ fixed_size = offsetof(struct qla81xx_fw_dump, ext_mem);
+ else if (IS_QLA25XX(ha))
+ fixed_size = offsetof(struct qla25xx_fw_dump, ext_mem);
+ else
+ fixed_size = offsetof(struct qla24xx_fw_dump, ext_mem);
mem_size = (ha->fw_memory_size - 0x100000 + 1) *
sizeof(uint32_t);
if (ha->mqenable)
mq_size = sizeof(struct qla2xxx_mq_chain);
/* Allocate memory for Fibre Channel Event Buffer. */
- if (!IS_QLA25XX(ha))
+ if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha))
goto try_eft;
tc = dma_alloc_coherent(&ha->pdev->dev, FCE_SIZE, &tc_dma,
@@ -851,7 +853,9 @@ cont_alloc:
dump_size = offsetof(struct qla2xxx_fw_dump, isp);
dump_size += fixed_size + mem_size + req_q_size + rsp_q_size +
- mq_size + eft_size + fce_size;
+ eft_size;
+ ha->chain_offset = dump_size;
+ dump_size += mq_size + fce_size;
ha->fw_dump = vmalloc(dump_size);
if (!ha->fw_dump) {
@@ -987,7 +991,8 @@ qla2x00_setup_chip(scsi_qla_host_t *vha)
&ha->fw_major_version,
&ha->fw_minor_version,
&ha->fw_subminor_version,
- &ha->fw_attributes, &ha->fw_memory_size);
+ &ha->fw_attributes, &ha->fw_memory_size,
+ ha->mpi_version, &ha->mpi_capabilities);
ha->flags.npiv_supported = 0;
if (IS_QLA2XXX_MIDTYPE(ha) &&
(ha->fw_attributes & BIT_2)) {
@@ -1665,10 +1670,6 @@ qla2x00_nvram_config(scsi_qla_host_t *vha)
qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
"invalid -- WWPN) defaults.\n");
- if (chksum)
- qla2xxx_hw_event_log(vha, HW_EVENT_NVRAM_CHKSUM_ERR, 0,
- MSW(chksum), LSW(chksum));
-
/*
* Set default initialization control block.
*/
@@ -4255,3 +4256,269 @@ qla84xx_init_chip(scsi_qla_host_t *vha)
return rval != QLA_SUCCESS || status[0] ? QLA_FUNCTION_FAILED:
QLA_SUCCESS;
}
+
+/* 81XX Support **************************************************************/
+
+int
+qla81xx_nvram_config(scsi_qla_host_t *vha)
+{
+ int rval;
+ struct init_cb_81xx *icb;
+ struct nvram_81xx *nv;
+ uint32_t *dptr;
+ uint8_t *dptr1, *dptr2;
+ uint32_t chksum;
+ uint16_t cnt;
+ struct qla_hw_data *ha = vha->hw;
+
+ rval = QLA_SUCCESS;
+ icb = (struct init_cb_81xx *)ha->init_cb;
+ nv = ha->nvram;
+
+ /* Determine NVRAM starting address. */
+ ha->nvram_size = sizeof(struct nvram_81xx);
+ ha->nvram_base = FA_NVRAM_FUNC0_ADDR;
+ ha->vpd_size = FA_NVRAM_VPD_SIZE;
+ ha->vpd_base = FA_NVRAM_VPD0_ADDR;
+ if (PCI_FUNC(ha->pdev->devfn) & 1) {
+ ha->nvram_base = FA_NVRAM_FUNC1_ADDR;
+ ha->vpd_base = FA_NVRAM_VPD1_ADDR;
+ }
+
+ /* Get VPD data into cache */
+ ha->vpd = ha->nvram + VPD_OFFSET;
+ ha->isp_ops->read_nvram(vha, (uint8_t *)ha->vpd,
+ ha->nvram_base - FA_NVRAM_FUNC0_ADDR, FA_NVRAM_VPD_SIZE * 4);
+
+ /* Get NVRAM data into cache and calculate checksum. */
+ dptr = (uint32_t *)nv;
+ ha->isp_ops->read_nvram(vha, (uint8_t *)dptr, ha->nvram_base,
+ ha->nvram_size);
+ for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++)
+ chksum += le32_to_cpu(*dptr++);
+
+ DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
+ DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));
+
+ /* Bad NVRAM data, set defaults parameters. */
+ if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || nv->id[2] != 'P'
+ || nv->id[3] != ' ' ||
+ nv->nvram_version < __constant_cpu_to_le16(ICB_VERSION)) {
+ /* Reset NVRAM data. */
+ qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
+ "checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
+ le16_to_cpu(nv->nvram_version));
+ qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
+ "invalid -- WWPN) defaults.\n");
+
+ /*
+ * Set default initialization control block.
+ */
+ memset(nv, 0, ha->nvram_size);
+ nv->nvram_version = __constant_cpu_to_le16(ICB_VERSION);
+ nv->version = __constant_cpu_to_le16(ICB_VERSION);
+ nv->frame_payload_size = __constant_cpu_to_le16(2048);
+ nv->execution_throttle = __constant_cpu_to_le16(0xFFFF);
+ nv->exchange_count = __constant_cpu_to_le16(0);
+ nv->port_name[0] = 0x21;
+ nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn);
+ nv->port_name[2] = 0x00;
+ nv->port_name[3] = 0xe0;
+ nv->port_name[4] = 0x8b;
+ nv->port_name[5] = 0x1c;
+ nv->port_name[6] = 0x55;
+ nv->port_name[7] = 0x86;
+ nv->node_name[0] = 0x20;
+ nv->node_name[1] = 0x00;
+ nv->node_name[2] = 0x00;
+ nv->node_name[3] = 0xe0;
+ nv->node_name[4] = 0x8b;
+ nv->node_name[5] = 0x1c;
+ nv->node_name[6] = 0x55;
+ nv->node_name[7] = 0x86;
+ nv->login_retry_count = __constant_cpu_to_le16(8);
+ nv->interrupt_delay_timer = __constant_cpu_to_le16(0);
+ nv->login_timeout = __constant_cpu_to_le16(0);
+ nv->firmware_options_1 =
+ __constant_cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1);
+ nv->firmware_options_2 = __constant_cpu_to_le32(2 << 4);
+ nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_12);
+ nv->firmware_options_3 = __constant_cpu_to_le32(2 << 13);
+ nv->host_p = __constant_cpu_to_le32(BIT_11|BIT_10);
+ nv->efi_parameters = __constant_cpu_to_le32(0);
+ nv->reset_delay = 5;
+ nv->max_luns_per_target = __constant_cpu_to_le16(128);
+ nv->port_down_retry_count = __constant_cpu_to_le16(30);
+ nv->link_down_timeout = __constant_cpu_to_le16(30);
+ nv->enode_mac[0] = 0x01;
+ nv->enode_mac[1] = 0x02;
+ nv->enode_mac[2] = 0x03;
+ nv->enode_mac[3] = 0x04;
+ nv->enode_mac[4] = 0x05;
+ nv->enode_mac[5] = 0x06 + PCI_FUNC(ha->pdev->devfn);
+
+ rval = 1;
+ }
+
+ /* Reset Initialization control block */
+ memset(icb, 0, sizeof(struct init_cb_81xx));
+
+ /* Copy 1st segment. */
+ dptr1 = (uint8_t *)icb;
+ dptr2 = (uint8_t *)&nv->version;
+ cnt = (uint8_t *)&icb->response_q_inpointer - (uint8_t *)&icb->version;
+ while (cnt--)
+ *dptr1++ = *dptr2++;
+
+ icb->login_retry_count = nv->login_retry_count;
+
+ /* Copy 2nd segment. */
+ dptr1 = (uint8_t *)&icb->interrupt_delay_timer;
+ dptr2 = (uint8_t *)&nv->interrupt_delay_timer;
+ cnt = (uint8_t *)&icb->reserved_5 -
+ (uint8_t *)&icb->interrupt_delay_timer;
+ while (cnt--)
+ *dptr1++ = *dptr2++;
+
+ memcpy(icb->enode_mac, nv->enode_mac, sizeof(icb->enode_mac));
+ /* Some boards (with valid NVRAMs) still have NULL enode_mac!! */
+ if (!memcmp(icb->enode_mac, "\0\0\0\0\0\0", sizeof(icb->enode_mac))) {
+ icb->enode_mac[0] = 0x01;
+ icb->enode_mac[1] = 0x02;
+ icb->enode_mac[2] = 0x03;
+ icb->enode_mac[3] = 0x04;
+ icb->enode_mac[4] = 0x05;
+ icb->enode_mac[5] = 0x06 + PCI_FUNC(ha->pdev->devfn);
+ }
+
+ /*
+ * Setup driver NVRAM options.
+ */
+ qla2x00_set_model_info(vha, nv->model_name, sizeof(nv->model_name),
+ "QLE81XX");
+
+ /* Use alternate WWN? */
+ if (nv->host_p & __constant_cpu_to_le32(BIT_15)) {
+ memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE);
+ memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE);
+ }
+
+ /* Prepare nodename */
+ if ((icb->firmware_options_1 & __constant_cpu_to_le32(BIT_14)) == 0) {
+ /*
+ * Firmware will apply the following mask if the nodename was
+ * not provided.
+ */
+ memcpy(icb->node_name, icb->port_name, WWN_SIZE);
+ icb->node_name[0] &= 0xF0;
+ }
+
+ /* Set host adapter parameters. */
+ ha->flags.disable_risc_code_load = 0;
+ ha->flags.enable_lip_reset = 0;
+ ha->flags.enable_lip_full_login =
+ le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0;
+ ha->flags.enable_target_reset =
+ le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0;
+ ha->flags.enable_led_scheme = 0;
+ ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0;
+
+ ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) &
+ (BIT_6 | BIT_5 | BIT_4)) >> 4;
+
+ /* save HBA serial number */
+ ha->serial0 = icb->port_name[5];
+ ha->serial1 = icb->port_name[6];
+ ha->serial2 = icb->port_name[7];
+ memcpy(vha->node_name, icb->node_name, WWN_SIZE);
+ memcpy(vha->port_name, icb->port_name, WWN_SIZE);
+
+ icb->execution_throttle = __constant_cpu_to_le16(0xFFFF);
+
+ ha->retry_count = le16_to_cpu(nv->login_retry_count);
+
+ /* Set minimum login_timeout to 4 seconds. */
+ if (le16_to_cpu(nv->login_timeout) < ql2xlogintimeout)
+ nv->login_timeout = cpu_to_le16(ql2xlogintimeout);
+ if (le16_to_cpu(nv->login_timeout) < 4)
+ nv->login_timeout = __constant_cpu_to_le16(4);
+ ha->login_timeout = le16_to_cpu(nv->login_timeout);
+ icb->login_timeout = nv->login_timeout;
+
+ /* Set minimum RATOV to 100 tenths of a second. */
+ ha->r_a_tov = 100;
+
+ ha->loop_reset_delay = nv->reset_delay;
+
+ /* Link Down Timeout = 0:
+ *
+ * When Port Down timer expires we will start returning
+ * I/O's to OS with "DID_NO_CONNECT".
+ *
+ * Link Down Timeout != 0:
+ *
+ * The driver waits for the link to come up after link down
+ * before returning I/Os to OS with "DID_NO_CONNECT".
+ */
+ if (le16_to_cpu(nv->link_down_timeout) == 0) {
+ ha->loop_down_abort_time =
+ (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT);
+ } else {
+ ha->link_down_timeout = le16_to_cpu(nv->link_down_timeout);
+ ha->loop_down_abort_time =
+ (LOOP_DOWN_TIME - ha->link_down_timeout);
+ }
+
+ /* Need enough time to try and get the port back. */
+ ha->port_down_retry_count = le16_to_cpu(nv->port_down_retry_count);
+ if (qlport_down_retry)
+ ha->port_down_retry_count = qlport_down_retry;
+
+ /* Set login_retry_count */
+ ha->login_retry_count = le16_to_cpu(nv->login_retry_count);
+ if (ha->port_down_retry_count ==
+ le16_to_cpu(nv->port_down_retry_count) &&
+ ha->port_down_retry_count > 3)
+ ha->login_retry_count = ha->port_down_retry_count;
+ else if (ha->port_down_retry_count > (int)ha->login_retry_count)
+ ha->login_retry_count = ha->port_down_retry_count;
+ if (ql2xloginretrycount)
+ ha->login_retry_count = ql2xloginretrycount;
+
+ /* Enable ZIO. */
+ if (!vha->flags.init_done) {
+ ha->zio_mode = le32_to_cpu(icb->firmware_options_2) &
+ (BIT_3 | BIT_2 | BIT_1 | BIT_0);
+ ha->zio_timer = le16_to_cpu(icb->interrupt_delay_timer) ?
+ le16_to_cpu(icb->interrupt_delay_timer): 2;
+ }
+ icb->firmware_options_2 &= __constant_cpu_to_le32(
+ ~(BIT_3 | BIT_2 | BIT_1 | BIT_0));
+ vha->flags.process_response_queue = 0;
+ if (ha->zio_mode != QLA_ZIO_DISABLED) {
+ ha->zio_mode = QLA_ZIO_MODE_6;
+
+ DEBUG2(printk("scsi(%ld): ZIO mode %d enabled; timer delay "
+ "(%d us).\n", vha->host_no, ha->zio_mode,
+ ha->zio_timer * 100));
+ qla_printk(KERN_INFO, ha,
+ "ZIO mode %d enabled; timer delay (%d us).\n",
+ ha->zio_mode, ha->zio_timer * 100);
+
+ icb->firmware_options_2 |= cpu_to_le32(
+ (uint32_t)ha->zio_mode);
+ icb->interrupt_delay_timer = cpu_to_le16(ha->zio_timer);
+ vha->flags.process_response_queue = 1;
+ }
+
+ if (rval) {
+ DEBUG2_3(printk(KERN_WARNING
+ "scsi(%ld): NVRAM configuration failed!\n", vha->host_no));
+ }
+ return (rval);
+}
+
+void
+qla81xx_update_fw_options(scsi_qla_host_t *ha)
+{
+}
OpenPOWER on IntegriCloud