summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla2xxx/qla_fw.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_fw.h')
-rw-r--r--drivers/scsi/qla2xxx/qla_fw.h173
1 files changed, 170 insertions, 3 deletions
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 9337e13..078f2a1 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -1,6 +1,6 @@
/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2005 QLogic Corporation
+ * Copyright (c) 2003-2008 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
@@ -719,7 +719,7 @@ struct tsk_mgmt_entry {
uint16_t timeout; /* Command timeout. */
- uint8_t lun[8]; /* FCP LUN (BE). */
+ struct scsi_lun lun; /* FCP LUN (BE). */
uint32_t control_flags; /* Control Flags. */
#define TCF_NOTMCMD_TO_TARGET BIT_31
@@ -793,7 +793,19 @@ struct device_reg_24xx {
#define FA_VPD_NVRAM_ADDR 0x48000
#define FA_FEATURE_ADDR 0x4C000
#define FA_FLASH_DESCR_ADDR 0x50000
-#define FA_HW_EVENT_ADDR 0x54000
+#define FA_HW_EVENT0_ADDR 0x54000
+#define FA_HW_EVENT1_ADDR 0x54200
+#define FA_HW_EVENT_SIZE 0x200
+#define FA_HW_EVENT_ENTRY_SIZE 4
+/*
+ * Flash Error Log Event Codes.
+ */
+#define HW_EVENT_RESET_ERR 0xF00B
+#define HW_EVENT_ISP_ERR 0xF020
+#define HW_EVENT_PARITY_ERR 0xF022
+#define HW_EVENT_NVRAM_CHKSUM_ERR 0xF023
+#define HW_EVENT_FLASH_FW_ERR 0xF024
+
#define FA_BOOT_LOG_ADDR 0x58000
#define FA_FW_DUMP0_ADDR 0x60000
#define FA_FW_DUMP1_ADDR 0x70000
@@ -1174,4 +1186,159 @@ struct vf_evfp_entry_24xx {
};
/* END MID Support ***********************************************************/
+
+/* Flash Description Table ***************************************************/
+
+struct qla_fdt_layout {
+ uint8_t sig[4];
+ uint16_t version;
+ uint16_t len;
+ uint16_t checksum;
+ uint8_t unused1[2];
+ uint8_t model[16];
+ uint16_t man_id;
+ uint16_t id;
+ uint8_t flags;
+ uint8_t erase_cmd;
+ uint8_t alt_erase_cmd;
+ uint8_t wrt_enable_cmd;
+ uint8_t wrt_enable_bits;
+ uint8_t wrt_sts_reg_cmd;
+ uint8_t unprotect_sec_cmd;
+ uint8_t read_man_id_cmd;
+ uint32_t block_size;
+ uint32_t alt_block_size;
+ uint32_t flash_size;
+ uint32_t wrt_enable_data;
+ uint8_t read_id_addr_len;
+ uint8_t wrt_disable_bits;
+ uint8_t read_dev_id_len;
+ uint8_t chip_erase_cmd;
+ uint16_t read_timeout;
+ uint8_t protect_sec_cmd;
+ uint8_t unused2[65];
+};
+
+/* 84XX Support **************************************************************/
+
+#define MBA_ISP84XX_ALERT 0x800f /* Alert Notification. */
+#define A84_PANIC_RECOVERY 0x1
+#define A84_OP_LOGIN_COMPLETE 0x2
+#define A84_DIAG_LOGIN_COMPLETE 0x3
+#define A84_GOLD_LOGIN_COMPLETE 0x4
+
+#define MBC_ISP84XX_RESET 0x3a /* Reset. */
+
+#define FSTATE_REMOTE_FC_DOWN BIT_0
+#define FSTATE_NSL_LINK_DOWN BIT_1
+#define FSTATE_IS_DIAG_FW BIT_2
+#define FSTATE_LOGGED_IN BIT_3
+#define FSTATE_WAITING_FOR_VERIFY BIT_4
+
+#define VERIFY_CHIP_IOCB_TYPE 0x1B
+struct verify_chip_entry_84xx {
+ uint8_t entry_type;
+ uint8_t entry_count;
+ uint8_t sys_defined;
+ uint8_t entry_status;
+
+ uint32_t handle;
+
+ uint16_t options;
+#define VCO_DONT_UPDATE_FW BIT_0
+#define VCO_FORCE_UPDATE BIT_1
+#define VCO_DONT_RESET_UPDATE BIT_2
+#define VCO_DIAG_FW BIT_3
+#define VCO_END_OF_DATA BIT_14
+#define VCO_ENABLE_DSD BIT_15
+
+ uint16_t reserved_1;
+
+ uint16_t data_seg_cnt;
+ uint16_t reserved_2[3];
+
+ uint32_t fw_ver;
+ uint32_t exchange_address;
+
+ uint32_t reserved_3[3];
+ uint32_t fw_size;
+ uint32_t fw_seq_size;
+ uint32_t relative_offset;
+
+ uint32_t dseg_address[2];
+ uint32_t dseg_length;
+};
+
+struct verify_chip_rsp_84xx {
+ uint8_t entry_type;
+ uint8_t entry_count;
+ uint8_t sys_defined;
+ uint8_t entry_status;
+
+ uint32_t handle;
+
+ uint16_t comp_status;
+#define CS_VCS_CHIP_FAILURE 0x3
+#define CS_VCS_BAD_EXCHANGE 0x8
+#define CS_VCS_SEQ_COMPLETEi 0x40
+
+ uint16_t failure_code;
+#define VFC_CHECKSUM_ERROR 0x1
+#define VFC_INVALID_LEN 0x2
+#define VFC_ALREADY_IN_PROGRESS 0x8
+
+ uint16_t reserved_1[4];
+
+ uint32_t fw_ver;
+ uint32_t exchange_address;
+
+ uint32_t reserved_2[6];
+};
+
+#define ACCESS_CHIP_IOCB_TYPE 0x2B
+struct access_chip_84xx {
+ uint8_t entry_type;
+ uint8_t entry_count;
+ uint8_t sys_defined;
+ uint8_t entry_status;
+
+ uint32_t handle;
+
+ uint16_t options;
+#define ACO_DUMP_MEMORY 0x0
+#define ACO_LOAD_MEMORY 0x1
+#define ACO_CHANGE_CONFIG_PARAM 0x2
+#define ACO_REQUEST_INFO 0x3
+
+ uint16_t reserved1;
+
+ uint16_t dseg_count;
+ uint16_t reserved2[3];
+
+ uint32_t parameter1;
+ uint32_t parameter2;
+ uint32_t parameter3;
+
+ uint32_t reserved3[3];
+ uint32_t total_byte_cnt;
+ uint32_t reserved4;
+
+ uint32_t dseg_address[2];
+ uint32_t dseg_length;
+};
+
+struct access_chip_rsp_84xx {
+ uint8_t entry_type;
+ uint8_t entry_count;
+ uint8_t sys_defined;
+ uint8_t entry_status;
+
+ uint32_t handle;
+
+ uint16_t comp_status;
+ uint16_t failure_code;
+ uint32_t residual_count;
+
+ uint32_t reserved[12];
+};
#endif
OpenPOWER on IntegriCloud