summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla1280.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qla1280.c')
-rw-r--r--drivers/scsi/qla1280.c359
1 files changed, 141 insertions, 218 deletions
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index b993652..637fb65 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -996,7 +996,6 @@ qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
break;
case ABORT_DEVICE:
- ha->flags.in_reset = 1;
if (qla1280_verbose)
printk(KERN_INFO
"scsi(%ld:%d:%d:%d): Queueing abort device "
@@ -1010,7 +1009,6 @@ qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
printk(KERN_INFO
"scsi(%ld:%d:%d:%d): Queueing device reset "
"command.\n", ha->host_no, bus, target, lun);
- ha->flags.in_reset = 1;
if (qla1280_device_reset(ha, bus, target) == 0)
result = SUCCESS;
break;
@@ -1019,7 +1017,6 @@ qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
if (qla1280_verbose)
printk(KERN_INFO "qla1280(%ld:%d): Issuing BUS "
"DEVICE RESET\n", ha->host_no, bus);
- ha->flags.in_reset = 1;
if (qla1280_bus_reset(ha, bus == 0))
result = SUCCESS;
@@ -1047,7 +1044,6 @@ qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
if (!list_empty(&ha->done_q))
qla1280_done(ha);
- ha->flags.in_reset = 0;
/* If we didn't manage to issue the action, or we have no
* command to wait for, exit here */
@@ -1269,6 +1265,22 @@ qla1280_biosparam_old(Disk * disk, kdev_t dev, int geom[])
return qla1280_biosparam(disk->device, NULL, disk->capacity, geom);
}
#endif
+
+/* disable risc and host interrupts */
+static inline void
+qla1280_disable_intrs(struct scsi_qla_host *ha)
+{
+ WRT_REG_WORD(&ha->iobase->ictrl, 0);
+ RD_REG_WORD(&ha->iobase->ictrl); /* PCI Posted Write flush */
+}
+
+/* enable risc and host interrupts */
+static inline void
+qla1280_enable_intrs(struct scsi_qla_host *ha)
+{
+ WRT_REG_WORD(&ha->iobase->ictrl, (ISP_EN_INT | ISP_EN_RISC));
+ RD_REG_WORD(&ha->iobase->ictrl); /* PCI Posted Write flush */
+}
/**************************************************************************
* qla1280_intr_handler
@@ -1290,7 +1302,7 @@ qla1280_intr_handler(int irq, void *dev_id, struct pt_regs *regs)
ha->isr_count++;
reg = ha->iobase;
- WRT_REG_WORD(&reg->ictrl, 0); /* disable our interrupt. */
+ qla1280_disable_intrs(ha);
data = qla1280_debounce_register(&reg->istatus);
/* Check for pending interrupts. */
@@ -1303,8 +1315,7 @@ qla1280_intr_handler(int irq, void *dev_id, struct pt_regs *regs)
spin_unlock(HOST_LOCK);
- /* enable our interrupt. */
- WRT_REG_WORD(&reg->ictrl, (ISP_EN_INT | ISP_EN_RISC));
+ qla1280_enable_intrs(ha);
LEAVE_INTR("qla1280_intr_handler");
return IRQ_RETVAL(handled);
@@ -1317,7 +1328,7 @@ qla1280_set_target_parameters(struct scsi_qla_host *ha, int bus, int target)
uint8_t mr;
uint16_t mb[MAILBOX_REGISTER_COUNT];
struct nvram *nv;
- int status;
+ int status, lun;
nv = &ha->nvram;
@@ -1325,24 +1336,38 @@ qla1280_set_target_parameters(struct scsi_qla_host *ha, int bus, int target)
/* Set Target Parameters. */
mb[0] = MBC_SET_TARGET_PARAMETERS;
- mb[1] = (uint16_t) (bus ? target | BIT_7 : target);
- mb[1] <<= 8;
-
- mb[2] = (nv->bus[bus].target[target].parameter.c << 8);
+ mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
+ mb[2] = nv->bus[bus].target[target].parameter.renegotiate_on_error << 8;
+ mb[2] |= nv->bus[bus].target[target].parameter.stop_queue_on_check << 9;
+ mb[2] |= nv->bus[bus].target[target].parameter.auto_request_sense << 10;
+ mb[2] |= nv->bus[bus].target[target].parameter.tag_queuing << 11;
+ mb[2] |= nv->bus[bus].target[target].parameter.enable_sync << 12;
+ mb[2] |= nv->bus[bus].target[target].parameter.enable_wide << 13;
+ mb[2] |= nv->bus[bus].target[target].parameter.parity_checking << 14;
+ mb[2] |= nv->bus[bus].target[target].parameter.disconnect_allowed << 15;
if (IS_ISP1x160(ha)) {
mb[2] |= nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr << 5;
- mb[3] = (nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8) |
- nv->bus[bus].target[target].sync_period;
+ mb[3] = (nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8);
mb[6] = (nv->bus[bus].target[target].ppr_1x160.flags.ppr_options << 8) |
nv->bus[bus].target[target].ppr_1x160.flags.ppr_bus_width;
mr |= BIT_6;
} else {
- mb[3] = (nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8) |
- nv->bus[bus].target[target].sync_period;
+ mb[3] = (nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8);
}
+ mb[3] |= nv->bus[bus].target[target].sync_period;
- status = qla1280_mailbox_command(ha, mr, &mb[0]);
+ status = qla1280_mailbox_command(ha, mr, mb);
+
+ /* Set Device Queue Parameters. */
+ for (lun = 0; lun < MAX_LUNS; lun++) {
+ mb[0] = MBC_SET_DEVICE_QUEUE;
+ mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
+ mb[1] |= lun;
+ mb[2] = nv->bus[bus].max_queue_depth;
+ mb[3] = nv->bus[bus].target[target].execution_throttle;
+ status |= qla1280_mailbox_command(ha, 0x0f, mb);
+ }
if (status)
printk(KERN_WARNING "scsi(%ld:%i:%i): "
@@ -1389,19 +1414,19 @@ qla1280_slave_configure(struct scsi_device *device)
}
#if LINUX_VERSION_CODE > 0x020500
- nv->bus[bus].target[target].parameter.f.enable_sync = device->sdtr;
- nv->bus[bus].target[target].parameter.f.enable_wide = device->wdtr;
+ nv->bus[bus].target[target].parameter.enable_sync = device->sdtr;
+ nv->bus[bus].target[target].parameter.enable_wide = device->wdtr;
nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = device->ppr;
#endif
if (driver_setup.no_sync ||
(driver_setup.sync_mask &&
(~driver_setup.sync_mask & (1 << target))))
- nv->bus[bus].target[target].parameter.f.enable_sync = 0;
+ nv->bus[bus].target[target].parameter.enable_sync = 0;
if (driver_setup.no_wide ||
(driver_setup.wide_mask &&
(~driver_setup.wide_mask & (1 << target))))
- nv->bus[bus].target[target].parameter.f.enable_wide = 0;
+ nv->bus[bus].target[target].parameter.enable_wide = 0;
if (IS_ISP1x160(ha)) {
if (driver_setup.no_ppr ||
(driver_setup.ppr_mask &&
@@ -1410,7 +1435,7 @@ qla1280_slave_configure(struct scsi_device *device)
}
spin_lock_irqsave(HOST_LOCK, flags);
- if (nv->bus[bus].target[target].parameter.f.enable_sync)
+ if (nv->bus[bus].target[target].parameter.enable_sync)
status = qla1280_set_target_parameters(ha, bus, target);
qla1280_get_target_parameters(ha, device);
spin_unlock_irqrestore(HOST_LOCK, flags);
@@ -1448,7 +1473,6 @@ qla1280_select_queue_depth(struct Scsi_Host *host, struct scsi_device *sdev_q)
*
* Input:
* ha = adapter block pointer.
- * done_q = done queue.
*/
static void
qla1280_done(struct scsi_qla_host *ha)
@@ -1522,7 +1546,7 @@ qla1280_return_status(struct response * sts, struct scsi_cmnd *cp)
int host_status = DID_ERROR;
uint16_t comp_status = le16_to_cpu(sts->comp_status);
uint16_t state_flags = le16_to_cpu(sts->state_flags);
- uint16_t residual_length = le16_to_cpu(sts->residual_length);
+ uint16_t residual_length = le32_to_cpu(sts->residual_length);
uint16_t scsi_status = le16_to_cpu(sts->scsi_status);
#if DEBUG_QLA1280_INTR
static char *reason[] = {
@@ -1582,7 +1606,7 @@ qla1280_return_status(struct response * sts, struct scsi_cmnd *cp)
case CS_DATA_OVERRUN:
dprintk(2, "Data overrun 0x%x\n", residual_length);
- dprintk(2, "qla1280_isr: response packet data\n");
+ dprintk(2, "qla1280_return_status: response packet data\n");
qla1280_dump_buffer(2, (char *)sts, RESPONSE_ENTRY_SIZE);
host_status = DID_ERROR;
break;
@@ -1617,40 +1641,6 @@ qla1280_return_status(struct response * sts, struct scsi_cmnd *cp)
/* QLogic ISP1280 Hardware Support Functions. */
/****************************************************************************/
- /*
- * qla2100_enable_intrs
- * qla2100_disable_intrs
- *
- * Input:
- * ha = adapter block pointer.
- *
- * Returns:
- * None
- */
-static inline void
-qla1280_enable_intrs(struct scsi_qla_host *ha)
-{
- struct device_reg __iomem *reg;
-
- reg = ha->iobase;
- /* enable risc and host interrupts */
- WRT_REG_WORD(&reg->ictrl, (ISP_EN_INT | ISP_EN_RISC));
- RD_REG_WORD(&reg->ictrl); /* PCI Posted Write flush */
- ha->flags.ints_enabled = 1;
-}
-
-static inline void
-qla1280_disable_intrs(struct scsi_qla_host *ha)
-{
- struct device_reg __iomem *reg;
-
- reg = ha->iobase;
- /* disable risc and host interrupts */
- WRT_REG_WORD(&reg->ictrl, 0);
- RD_REG_WORD(&reg->ictrl); /* PCI Posted Write flush */
- ha->flags.ints_enabled = 0;
-}
-
/*
* qla1280_initialize_adapter
* Initialize board.
@@ -1679,7 +1669,6 @@ qla1280_initialize_adapter(struct scsi_qla_host *ha)
ha->flags.reset_active = 0;
ha->flags.abort_isp_active = 0;
- ha->flags.ints_enabled = 0;
#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
if (ia64_platform_is("sn2")) {
printk(KERN_INFO "scsi(%li): Enabling SN2 PCI DMA "
@@ -1758,69 +1747,6 @@ qla1280_initialize_adapter(struct scsi_qla_host *ha)
return status;
}
-
-/*
- * ISP Firmware Test
- * Checks if present version of RISC firmware is older than
- * driver firmware.
- *
- * Input:
- * ha = adapter block pointer.
- *
- * Returns:
- * 0 = firmware does not need to be loaded.
- */
-static int
-qla1280_isp_firmware(struct scsi_qla_host *ha)
-{
- struct nvram *nv = (struct nvram *) ha->response_ring;
- int status = 0; /* dg 2/27 always loads RISC */
- uint16_t mb[MAILBOX_REGISTER_COUNT];
-
- ENTER("qla1280_isp_firmware");
-
- dprintk(1, "scsi(%li): Determining if RISC is loaded\n", ha->host_no);
-
- /* Bad NVRAM data, load RISC code. */
- if (!ha->nvram_valid) {
- ha->flags.disable_risc_code_load = 0;
- } else
- ha->flags.disable_risc_code_load =
- nv->cntr_flags_1.disable_loading_risc_code;
-
- if (ha->flags.disable_risc_code_load) {
- dprintk(3, "qla1280_isp_firmware: Telling RISC to verify "
- "checksum of loaded BIOS code.\n");
-
- /* Verify checksum of loaded RISC code. */
- mb[0] = MBC_VERIFY_CHECKSUM;
- /* mb[1] = ql12_risc_code_addr01; */
- mb[1] = *ql1280_board_tbl[ha->devnum].fwstart;
-
- if (!(status =
- qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]))) {
- /* Start firmware execution. */
- dprintk(3, "qla1280_isp_firmware: Startng F/W "
- "execution.\n");
-
- mb[0] = MBC_EXECUTE_FIRMWARE;
- /* mb[1] = ql12_risc_code_addr01; */
- mb[1] = *ql1280_board_tbl[ha->devnum].fwstart;
- qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
- } else
- printk(KERN_INFO "qla1280: RISC checksum failed.\n");
- } else {
- dprintk(1, "qla1280: NVRAM configured to load RISC load.\n");
- status = 1;
- }
-
- if (status)
- dprintk(2, "qla1280_isp_firmware: **** Load RISC code ****\n");
-
- LEAVE("qla1280_isp_firmware");
- return status;
-}
-
/*
* Chip diagnostics
* Test chip for proper operation.
@@ -2006,7 +1932,7 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
"%d,%d(0x%x)\n",
risc_code_address, cnt, num, risc_address);
for(i = 0; i < cnt; i++)
- ((uint16_t *)ha->request_ring)[i] =
+ ((__le16 *)ha->request_ring)[i] =
cpu_to_le16(risc_code_address[i]);
mb[0] = MBC_LOAD_RAM;
@@ -2085,7 +2011,7 @@ qla1280_start_firmware(struct scsi_qla_host *ha)
mb[1] = *ql1280_board_tbl[ha->devnum].fwstart;
err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
if (err) {
- printk(KERN_ERR "scsi(%li): Failed checksum\n", ha->host_no);
+ printk(KERN_ERR "scsi(%li): RISC checksum failed.\n", ha->host_no);
return err;
}
@@ -2105,14 +2031,7 @@ qla1280_start_firmware(struct scsi_qla_host *ha)
static int
qla1280_load_firmware(struct scsi_qla_host *ha)
{
- int err = -ENODEV;
-
- /* If firmware needs to be loaded */
- if (!qla1280_isp_firmware(ha)) {
- printk(KERN_ERR "scsi(%li): isp_firmware() failed!\n",
- ha->host_no);
- goto out;
- }
+ int err;
err = qla1280_chip_diag(ha);
if (err)
@@ -2246,17 +2165,17 @@ qla1280_set_target_defaults(struct scsi_qla_host *ha, int bus, int target)
{
struct nvram *nv = &ha->nvram;
- nv->bus[bus].target[target].parameter.f.renegotiate_on_error = 1;
- nv->bus[bus].target[target].parameter.f.auto_request_sense = 1;
- nv->bus[bus].target[target].parameter.f.tag_queuing = 1;
- nv->bus[bus].target[target].parameter.f.enable_sync = 1;
+ nv->bus[bus].target[target].parameter.renegotiate_on_error = 1;
+ nv->bus[bus].target[target].parameter.auto_request_sense = 1;
+ nv->bus[bus].target[target].parameter.tag_queuing = 1;
+ nv->bus[bus].target[target].parameter.enable_sync = 1;
#if 1 /* Some SCSI Processors do not seem to like this */
- nv->bus[bus].target[target].parameter.f.enable_wide = 1;
+ nv->bus[bus].target[target].parameter.enable_wide = 1;
#endif
- nv->bus[bus].target[target].parameter.f.parity_checking = 1;
- nv->bus[bus].target[target].parameter.f.disconnect_allowed = 1;
nv->bus[bus].target[target].execution_throttle =
nv->bus[bus].max_queue_depth - 1;
+ nv->bus[bus].target[target].parameter.parity_checking = 1;
+ nv->bus[bus].target[target].parameter.disconnect_allowed = 1;
if (IS_ISP1x160(ha)) {
nv->bus[bus].target[target].flags.flags1x160.device_enable = 1;
@@ -2284,9 +2203,9 @@ qla1280_set_defaults(struct scsi_qla_host *ha)
/* nv->cntr_flags_1.disable_loading_risc_code = 1; */
nv->firmware_feature.f.enable_fast_posting = 1;
nv->firmware_feature.f.disable_synchronous_backoff = 1;
- nv->termination.f.scsi_bus_0_control = 3;
- nv->termination.f.scsi_bus_1_control = 3;
- nv->termination.f.auto_term_support = 1;
+ nv->termination.scsi_bus_0_control = 3;
+ nv->termination.scsi_bus_1_control = 3;
+ nv->termination.auto_term_support = 1;
/*
* Set default FIFO magic - What appropriate values would be here
@@ -2296,7 +2215,12 @@ qla1280_set_defaults(struct scsi_qla_host *ha)
* header file provided by QLogic seems to be bogus or incomplete
* at best.
*/
- nv->isp_config.c = ISP_CFG1_BENAB|ISP_CFG1_F128;
+ nv->isp_config.burst_enable = 1;
+ if (IS_ISP1040(ha))
+ nv->isp_config.fifo_threshold |= 3;
+ else
+ nv->isp_config.fifo_threshold |= 4;
+
if (IS_ISP1x160(ha))
nv->isp_parameter = 0x01; /* fast memory enable */
@@ -2327,66 +2251,53 @@ qla1280_config_target(struct scsi_qla_host *ha, int bus, int target)
struct nvram *nv = &ha->nvram;
uint16_t mb[MAILBOX_REGISTER_COUNT];
int status, lun;
+ uint16_t flag;
/* Set Target Parameters. */
mb[0] = MBC_SET_TARGET_PARAMETERS;
- mb[1] = (uint16_t) (bus ? target | BIT_7 : target);
- mb[1] <<= 8;
-
- /*
- * Do not enable wide, sync, and ppr for the initial
- * INQUIRY run. We enable this later if we determine
- * the target actually supports it.
- */
- nv->bus[bus].target[target].parameter.f.
- auto_request_sense = 1;
- nv->bus[bus].target[target].parameter.f.
- stop_queue_on_check = 0;
-
- if (IS_ISP1x160(ha))
- nv->bus[bus].target[target].ppr_1x160.
- flags.enable_ppr = 0;
+ mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
/*
- * No sync, wide, etc. while probing
+ * Do not enable sync and ppr for the initial INQUIRY run. We
+ * enable this later if we determine the target actually
+ * supports it.
*/
- mb[2] = (nv->bus[bus].target[target].parameter.c << 8) &
- ~(TP_SYNC /*| TP_WIDE | TP_PPR*/);
+ mb[2] = (TP_RENEGOTIATE | TP_AUTO_REQUEST_SENSE | TP_TAGGED_QUEUE
+ | TP_WIDE | TP_PARITY | TP_DISCONNECT);
if (IS_ISP1x160(ha))
mb[3] = nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8;
else
mb[3] = nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8;
mb[3] |= nv->bus[bus].target[target].sync_period;
-
- status = qla1280_mailbox_command(ha, BIT_3 | BIT_2 | BIT_1 | BIT_0, &mb[0]);
+ status = qla1280_mailbox_command(ha, 0x0f, mb);
/* Save Tag queuing enable flag. */
- mb[0] = BIT_0 << target;
- if (nv->bus[bus].target[target].parameter.f.tag_queuing)
- ha->bus_settings[bus].qtag_enables |= mb[0];
+ flag = (BIT_0 << target) & mb[0];
+ if (nv->bus[bus].target[target].parameter.tag_queuing)
+ ha->bus_settings[bus].qtag_enables |= flag;
/* Save Device enable flag. */
if (IS_ISP1x160(ha)) {
if (nv->bus[bus].target[target].flags.flags1x160.device_enable)
- ha->bus_settings[bus].device_enables |= mb[0];
+ ha->bus_settings[bus].device_enables |= flag;
ha->bus_settings[bus].lun_disables |= 0;
} else {
if (nv->bus[bus].target[target].flags.flags1x80.device_enable)
- ha->bus_settings[bus].device_enables |= mb[0];
+ ha->bus_settings[bus].device_enables |= flag;
/* Save LUN disable flag. */
if (nv->bus[bus].target[target].flags.flags1x80.lun_disable)
- ha->bus_settings[bus].lun_disables |= mb[0];
+ ha->bus_settings[bus].lun_disables |= flag;
}
/* Set Device Queue Parameters. */
for (lun = 0; lun < MAX_LUNS; lun++) {
mb[0] = MBC_SET_DEVICE_QUEUE;
- mb[1] = (uint16_t)(bus ? target | BIT_7 : target);
- mb[1] = mb[1] << 8 | lun;
+ mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
+ mb[1] |= lun;
mb[2] = nv->bus[bus].max_queue_depth;
mb[3] = nv->bus[bus].target[target].execution_throttle;
- status |= qla1280_mailbox_command(ha, 0x0f, &mb[0]);
+ status |= qla1280_mailbox_command(ha, 0x0f, mb);
}
return status;
@@ -2431,7 +2342,6 @@ qla1280_nvram_config(struct scsi_qla_host *ha)
struct nvram *nv = &ha->nvram;
int bus, target, status = 0;
uint16_t mb[MAILBOX_REGISTER_COUNT];
- uint16_t mask;
ENTER("qla1280_nvram_config");
@@ -2439,7 +2349,7 @@ qla1280_nvram_config(struct scsi_qla_host *ha)
/* Always force AUTO sense for LINUX SCSI */
for (bus = 0; bus < MAX_BUSES; bus++)
for (target = 0; target < MAX_TARGETS; target++) {
- nv->bus[bus].target[target].parameter.f.
+ nv->bus[bus].target[target].parameter.
auto_request_sense = 1;
}
} else {
@@ -2457,31 +2367,40 @@ qla1280_nvram_config(struct scsi_qla_host *ha)
hwrev = RD_REG_WORD(&reg->cfg_0) & ISP_CFG0_HWMSK;
- cfg1 = RD_REG_WORD(&reg->cfg_1);
+ cfg1 = RD_REG_WORD(&reg->cfg_1) & ~(BIT_4 | BIT_5 | BIT_6);
cdma_conf = RD_REG_WORD(&reg->cdma_cfg);
ddma_conf = RD_REG_WORD(&reg->ddma_cfg);
/* Busted fifo, says mjacob. */
- if (hwrev == ISP_CFG0_1040A)
- WRT_REG_WORD(&reg->cfg_1, cfg1 | ISP_CFG1_F64);
- else
- WRT_REG_WORD(&reg->cfg_1, cfg1 | ISP_CFG1_F64 | ISP_CFG1_BENAB);
+ if (hwrev != ISP_CFG0_1040A)
+ cfg1 |= nv->isp_config.fifo_threshold << 4;
+
+ cfg1 |= nv->isp_config.burst_enable << 2;
+ WRT_REG_WORD(&reg->cfg_1, cfg1);
WRT_REG_WORD(&reg->cdma_cfg, cdma_conf | CDMA_CONF_BENAB);
WRT_REG_WORD(&reg->ddma_cfg, cdma_conf | DDMA_CONF_BENAB);
} else {
+ uint16_t cfg1, term;
+
/* Set ISP hardware DMA burst */
- mb[0] = nv->isp_config.c;
+ cfg1 = nv->isp_config.fifo_threshold << 4;
+ cfg1 |= nv->isp_config.burst_enable << 2;
/* Enable DMA arbitration on dual channel controllers */
if (ha->ports > 1)
- mb[0] |= BIT_13;
- WRT_REG_WORD(&reg->cfg_1, mb[0]);
+ cfg1 |= BIT_13;
+ WRT_REG_WORD(&reg->cfg_1, cfg1);
/* Set SCSI termination. */
- WRT_REG_WORD(&reg->gpio_enable, (BIT_3 + BIT_2 + BIT_1 + BIT_0));
- mb[0] = nv->termination.c & (BIT_3 + BIT_2 + BIT_1 + BIT_0);
- WRT_REG_WORD(&reg->gpio_data, mb[0]);
+ WRT_REG_WORD(&reg->gpio_enable,
+ BIT_7 | BIT_3 | BIT_2 | BIT_1 | BIT_0);
+ term = nv->termination.scsi_bus_1_control;
+ term |= nv->termination.scsi_bus_0_control << 2;
+ term |= nv->termination.auto_term_support << 7;
+ RD_REG_WORD(&reg->id_l); /* Flush PCI write */
+ WRT_REG_WORD(&reg->gpio_data, term);
}
+ RD_REG_WORD(&reg->id_l); /* Flush PCI write */
/* ISP parameter word. */
mb[0] = MBC_SET_SYSTEM_PARAMETER;
@@ -2497,16 +2416,17 @@ qla1280_nvram_config(struct scsi_qla_host *ha)
/* Firmware feature word. */
mb[0] = MBC_SET_FIRMWARE_FEATURES;
- mask = BIT_5 | BIT_1 | BIT_0;
- mb[1] = le16_to_cpu(nv->firmware_feature.w) & (mask);
+ mb[1] = nv->firmware_feature.f.enable_fast_posting;
+ mb[1] |= nv->firmware_feature.f.report_lvd_bus_transition << 1;
+ mb[1] |= nv->firmware_feature.f.disable_synchronous_backoff << 5;
#if defined(CONFIG_IA64_GENERIC) || defined (CONFIG_IA64_SGI_SN2)
if (ia64_platform_is("sn2")) {
printk(KERN_INFO "scsi(%li): Enabling SN2 PCI DMA "
"workaround\n", ha->host_no);
- mb[1] |= BIT_9;
+ mb[1] |= nv->firmware_feature.f.unused_9 << 9; /* XXX */
}
#endif
- status |= qla1280_mailbox_command(ha, mask, &mb[0]);
+ status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
/* Retry count and delay. */
mb[0] = MBC_SET_RETRY_COUNT;
@@ -2535,27 +2455,27 @@ qla1280_nvram_config(struct scsi_qla_host *ha)
mb[2] |= BIT_5;
if (nv->bus[1].config_2.data_line_active_negation)
mb[2] |= BIT_4;
- status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
+ status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);
mb[0] = MBC_SET_DATA_OVERRUN_RECOVERY;
mb[1] = 2; /* Reset SCSI bus and return all outstanding IO */
- status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
+ status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
/* thingy */
mb[0] = MBC_SET_PCI_CONTROL;
- mb[1] = 2; /* Data DMA Channel Burst Enable */
- mb[2] = 2; /* Command DMA Channel Burst Enable */
- status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
+ mb[1] = BIT_1; /* Data DMA Channel Burst Enable */
+ mb[2] = BIT_1; /* Command DMA Channel Burst Enable */
+ status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);
mb[0] = MBC_SET_TAG_AGE_LIMIT;
mb[1] = 8;
- status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
+ status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
/* Selection timeout. */
mb[0] = MBC_SET_SELECTION_TIMEOUT;
mb[1] = nv->bus[0].selection_timeout;
mb[2] = nv->bus[1].selection_timeout;
- status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
+ status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);
for (bus = 0; bus < ha->ports; bus++)
status |= qla1280_config_bus(ha, bus);
@@ -3066,7 +2986,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
struct scsi_cmnd *cmd = sp->cmd;
cmd_a64_entry_t *pkt;
struct scatterlist *sg = NULL;
- u32 *dword_ptr;
+ __le32 *dword_ptr;
dma_addr_t dma_handle;
int status = 0;
int cnt;
@@ -3104,10 +3024,13 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt);
}
+ dprintk(3, "Number of free entries=(%d) seg_cnt=0x%x\n",
+ ha->req_q_cnt, seg_cnt);
+
/* If room for request in request ring. */
if ((req_cnt + 2) >= ha->req_q_cnt) {
status = 1;
- dprintk(2, "qla1280_64bit_start_scsi: in-ptr=0x%x req_q_cnt="
+ dprintk(2, "qla1280_start_scsi: in-ptr=0x%x req_q_cnt="
"0x%xreq_cnt=0x%x", ha->req_ring_index, ha->req_q_cnt,
req_cnt);
goto out;
@@ -3119,7 +3042,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
if (cnt >= MAX_OUTSTANDING_COMMANDS) {
status = 1;
- dprintk(2, "qla1280_64bit_start_scsi: NO ROOM IN "
+ dprintk(2, "qla1280_start_scsi: NO ROOM IN "
"OUTSTANDING ARRAY, req_q_cnt=0x%x", ha->req_q_cnt);
goto out;
}
@@ -3128,7 +3051,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
ha->req_q_cnt -= req_cnt;
CMD_HANDLE(sp->cmd) = (unsigned char *)(unsigned long)(cnt + 1);
- dprintk(2, "64bit_start: cmd=%p sp=%p CDB=%xm, handle %lx\n", cmd, sp,
+ dprintk(2, "start: cmd=%p sp=%p CDB=%xm, handle %lx\n", cmd, sp,
cmd->cmnd[0], (long)CMD_HANDLE(sp->cmd));
dprintk(2, " bus %i, target %i, lun %i\n",
SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
@@ -3350,7 +3273,7 @@ qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
struct scsi_cmnd *cmd = sp->cmd;
struct cmd_entry *pkt;
struct scatterlist *sg = NULL;
- uint32_t *dword_ptr;
+ __le32 *dword_ptr;
int status = 0;
int cnt;
int req_cnt;
@@ -3993,21 +3916,21 @@ qla1280_get_target_options(struct scsi_cmnd *cmd, struct scsi_qla_host *ha)
result = cmd->request_buffer;
n = &ha->nvram;
- n->bus[bus].target[target].parameter.f.enable_wide = 0;
- n->bus[bus].target[target].parameter.f.enable_sync = 0;
+ n->bus[bus].target[target].parameter.enable_wide = 0;
+ n->bus[bus].target[target].parameter.enable_sync = 0;
n->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 0;
if (result[7] & 0x60)
- n->bus[bus].target[target].parameter.f.enable_wide = 1;
+ n->bus[bus].target[target].parameter.enable_wide = 1;
if (result[7] & 0x10)
- n->bus[bus].target[target].parameter.f.enable_sync = 1;
+ n->bus[bus].target[target].parameter.enable_sync = 1;
if ((result[2] >= 3) && (result[4] + 5 > 56) &&
(result[56] & 0x4))
n->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 1;
dprintk(2, "get_target_options(): wide %i, sync %i, ppr %i\n",
- n->bus[bus].target[target].parameter.f.enable_wide,
- n->bus[bus].target[target].parameter.f.enable_sync,
+ n->bus[bus].target[target].parameter.enable_wide,
+ n->bus[bus].target[target].parameter.enable_sync,
n->bus[bus].target[target].ppr_1x160.flags.enable_ppr);
}
#endif
@@ -4071,7 +3994,7 @@ qla1280_status_entry(struct scsi_qla_host *ha, struct response *pkt,
/* Save ISP completion status */
CMD_RESULT(cmd) = qla1280_return_status(pkt, cmd);
- if (scsi_status & SS_CHECK_CONDITION) {
+ if (scsi_status & SAM_STAT_CHECK_CONDITION) {
if (comp_status != CS_ARS_FAILED) {
uint16_t req_sense_length =
le16_to_cpu(pkt->req_sense_length);
@@ -4650,7 +4573,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
if (pci_set_dma_mask(ha->pdev, (dma_addr_t) ~ 0ULL)) {
if (pci_set_dma_mask(ha->pdev, 0xffffffff)) {
printk(KERN_WARNING "scsi(%li): Unable to set a "
- " suitable DMA mask - aboring\n", ha->host_no);
+ "suitable DMA mask - aborting\n", ha->host_no);
error = -ENODEV;
goto error_free_irq;
}
@@ -4660,14 +4583,14 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
#else
if (pci_set_dma_mask(ha->pdev, 0xffffffff)) {
printk(KERN_WARNING "scsi(%li): Unable to set a "
- " suitable DMA mask - aboring\n", ha->host_no);
+ "suitable DMA mask - aborting\n", ha->host_no);
error = -ENODEV;
goto error_free_irq;
}
#endif
ha->request_ring = pci_alloc_consistent(ha->pdev,
- ((REQUEST_ENTRY_CNT + 1) * (sizeof(request_t))),
+ ((REQUEST_ENTRY_CNT + 1) * sizeof(request_t)),
&ha->request_dma);
if (!ha->request_ring) {
printk(KERN_INFO "qla1280: Failed to get request memory\n");
@@ -4675,7 +4598,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
}
ha->response_ring = pci_alloc_consistent(ha->pdev,
- ((RESPONSE_ENTRY_CNT + 1) * (sizeof(struct response))),
+ ((RESPONSE_ENTRY_CNT + 1) * sizeof(struct response)),
&ha->response_dma);
if (!ha->response_ring) {
printk(KERN_INFO "qla1280: Failed to get response memory\n");
@@ -4758,7 +4681,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
#if LINUX_VERSION_CODE >= 0x020600
error_disable_adapter:
- WRT_REG_WORD(&ha->iobase->ictrl, 0);
+ qla1280_disable_intrs(ha);
#endif
error_free_irq:
free_irq(pdev->irq, ha);
@@ -4770,11 +4693,11 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
#endif
error_free_response_ring:
pci_free_consistent(ha->pdev,
- ((RESPONSE_ENTRY_CNT + 1) * (sizeof(struct response))),
+ ((RESPONSE_ENTRY_CNT + 1) * sizeof(struct response)),
ha->response_ring, ha->response_dma);
error_free_request_ring:
pci_free_consistent(ha->pdev,
- ((REQUEST_ENTRY_CNT + 1) * (sizeof(request_t))),
+ ((REQUEST_ENTRY_CNT + 1) * sizeof(request_t)),
ha->request_ring, ha->request_dma);
error_put_host:
scsi_host_put(host);
@@ -4795,7 +4718,7 @@ qla1280_remove_one(struct pci_dev *pdev)
scsi_remove_host(host);
#endif
- WRT_REG_WORD(&ha->iobase->ictrl, 0);
+ qla1280_disable_intrs(ha);
free_irq(pdev->irq, ha);
OpenPOWER on IntegriCloud