diff options
Diffstat (limited to 'drivers/scsi/mpt2sas/mpt2sas_scsih.c')
| -rw-r--r-- | drivers/scsi/mpt2sas/mpt2sas_scsih.c | 5687 |
1 files changed, 5687 insertions, 0 deletions
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c new file mode 100644 index 0000000..0c463c4 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -0,0 +1,5687 @@ +/* + * Scsi Host Layer for MPT (Message Passing Technology) based controllers + * + * This code is based on drivers/scsi/mpt2sas/mpt2_scsih.c + * Copyright (C) 2007-2008 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/blkdev.h> +#include <linux/sched.h> +#include <linux/workqueue.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/interrupt.h> + +#include "mpt2sas_base.h" + +MODULE_AUTHOR(MPT2SAS_AUTHOR); +MODULE_DESCRIPTION(MPT2SAS_DESCRIPTION); +MODULE_LICENSE("GPL"); +MODULE_VERSION(MPT2SAS_DRIVER_VERSION); + +#define RAID_CHANNEL 1 + +/* forward proto's */ +static void _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc, + struct _sas_node *sas_expander); +static void _firmware_event_work(struct work_struct *work); + +/* global parameters */ +LIST_HEAD(mpt2sas_ioc_list); + +/* local parameters */ +static u8 scsi_io_cb_idx = -1; +static u8 tm_cb_idx = -1; +static u8 ctl_cb_idx = -1; +static u8 base_cb_idx = -1; +static u8 transport_cb_idx = -1; +static u8 config_cb_idx = -1; +static int mpt_ids; + +/* command line options */ +static u32 logging_level; +MODULE_PARM_DESC(logging_level, " bits for enabling additional logging info " + "(default=0)"); + +/* scsi-mid layer global parmeter is max_report_luns, which is 511 */ +#define MPT2SAS_MAX_LUN (16895) +static int max_lun = MPT2SAS_MAX_LUN; +module_param(max_lun, int, 0); +MODULE_PARM_DESC(max_lun, " max lun, default=16895 "); + +/** + * struct sense_info - common structure for obtaining sense keys + * @skey: sense key + * @asc: additional sense code + * @ascq: additional sense code qualifier + */ +struct sense_info { + u8 skey; + u8 asc; + u8 ascq; +}; + + +#define MPT2SAS_RESCAN_AFTER_HOST_RESET (0xFFFF) +/** + * struct fw_event_work - firmware event struct + * @list: link list framework + * @work: work object (ioc->fault_reset_work_q) + * @ioc: per adapter object + * @VF_ID: virtual function id + * @host_reset_handling: handling events during host reset + * @ignore: flag meaning this event has been marked to ignore + * @event: firmware event MPI2_EVENT_XXX defined in mpt2_ioc.h + * @event_data: reply event data payload follows + * + * This object stored on ioc->fw_event_list. + */ +struct fw_event_work { + struct list_head list; + struct delayed_work work; + struct MPT2SAS_ADAPTER *ioc; + u8 VF_ID; + u8 host_reset_handling; + u8 ignore; + u16 event; + void *event_data; +}; + +/** + * struct _scsi_io_transfer - scsi io transfer + * @handle: sas device handle (assigned by firmware) + * @is_raid: flag set for hidden raid components + * @dir: DMA_TO_DEVICE, DMA_FROM_DEVICE, + * @data_length: data transfer length + * @data_dma: dma pointer to data + * @sense: sense data + * @lun: lun number + * @cdb_length: cdb length + * @cdb: cdb contents + * @valid_reply: flag set for reply message + * @timeout: timeout for this command + * @sense_length: sense length + * @ioc_status: ioc status + * @scsi_state: scsi state + * @scsi_status: scsi staus + * @log_info: log information + * @transfer_length: data length transfer when there is a reply message + * + * Used for sending internal scsi commands to devices within this module. + * Refer to _scsi_send_scsi_io(). + */ +struct _scsi_io_transfer { + u16 handle; + u8 is_raid; + enum dma_data_direction dir; + u32 data_length; + dma_addr_t data_dma; + u8 sense[SCSI_SENSE_BUFFERSIZE]; + u32 lun; + u8 cdb_length; + u8 cdb[32]; + u8 timeout; + u8 valid_reply; + /* the following bits are only valid when 'valid_reply = 1' */ + u32 sense_length; + u16 ioc_status; + u8 scsi_state; + u8 scsi_status; + u32 log_info; + u32 transfer_length; +}; + +/* + * The pci device ids are defined in mpi/mpi2_cnfg.h. + */ +static struct pci_device_id scsih_pci_table[] = { + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2004, + PCI_ANY_ID, PCI_ANY_ID }, + /* Falcon ~ 2008*/ + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2008, + PCI_ANY_ID, PCI_ANY_ID }, + /* Liberator ~ 2108 */ + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_1, + PCI_ANY_ID, PCI_ANY_ID }, + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_2, + PCI_ANY_ID, PCI_ANY_ID }, + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_3, + PCI_ANY_ID, PCI_ANY_ID }, + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_1, + PCI_ANY_ID, PCI_ANY_ID }, + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_2, + PCI_ANY_ID, PCI_ANY_ID }, + {0} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(pci, scsih_pci_table); + +/** + * scsih_set_debug_level - global setting of ioc->logging_level. + * + * Note: The logging levels are defined in mpt2sas_debug.h. + */ +static int +scsih_set_debug_level(const char *val, struct kernel_param *kp) +{ + int ret = param_set_int(val, kp); + struct MPT2SAS_ADAPTER *ioc; + + if (ret) + return ret; + + printk(KERN_INFO "setting logging_level(0x%08x)\n", logging_level); + list_for_each_entry(ioc, &mpt2sas_ioc_list, list) + ioc->logging_level = logging_level; + return 0; +} +module_param_call(logging_level, scsih_set_debug_level, param_get_int, + &logging_level, 0644); + +/** + * _scsih_srch_boot_sas_address - search based on sas_address + * @sas_address: sas address + * @boot_device: boot device object from bios page 2 + * + * Returns 1 when there's a match, 0 means no match. + */ +static inline int +_scsih_srch_boot_sas_address(u64 sas_address, + Mpi2BootDeviceSasWwid_t *boot_device) +{ + return (sas_address == le64_to_cpu(boot_device->SASAddress)) ? 1 : 0; +} + +/** + * _scsih_srch_boot_device_name - search based on device name + * @device_name: device name specified in INDENTIFY fram + * @boot_device: boot device object from bios page 2 + * + * Returns 1 when there's a match, 0 means no match. + */ +static inline int +_scsih_srch_boot_device_name(u64 device_name, + Mpi2BootDeviceDeviceName_t *boot_device) +{ + return (device_name == le64_to_cpu(boot_device->DeviceName)) ? 1 : 0; +} + +/** + * _scsih_srch_boot_encl_slot - search based on enclosure_logical_id/slot + * @enclosure_logical_id: enclosure logical id + * @slot_number: slot number + * @boot_device: boot device object from bios page 2 + * + * Returns 1 when there's a match, 0 means no match. + */ +static inline int +_scsih_srch_boot_encl_slot(u64 enclosure_logical_id, u16 slot_number, + Mpi2BootDeviceEnclosureSlot_t *boot_device) +{ + return (enclosure_logical_id == le64_to_cpu(boot_device-> + EnclosureLogicalID) && slot_number == le16_to_cpu(boot_device-> + SlotNumber)) ? 1 : 0; +} + +/** + * _scsih_is_boot_device - search for matching boot device. + * @sas_address: sas address + * @device_name: device name specified in INDENTIFY fram + * @enclosure_logical_id: enclosure logical id + * @slot_number: slot number + * @form: specifies boot device form + * @boot_device: boot device object from bios page 2 + * + * Returns 1 when there's a match, 0 means no match. + */ +static int +_scsih_is_boot_device(u64 sas_address, u64 device_name, + u64 enclosure_logical_id, u16 slot, u8 form, + Mpi2BiosPage2BootDevice_t *boot_device) +{ + int rc = 0; + + switch (form) { + case MPI2_BIOSPAGE2_FORM_SAS_WWID: + if (!sas_address) + break; + rc = _scsih_srch_boot_sas_address( + sas_address, &boot_device->SasWwid); + break; + case MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT: + if (!enclosure_logical_id) + break; + rc = _scsih_srch_boot_encl_slot( + enclosure_logical_id, + slot, &boot_device->EnclosureSlot); + break; + case MPI2_BIOSPAGE2_FORM_DEVICE_NAME: + if (!device_name) + break; + rc = _scsih_srch_boot_device_name( + device_name, &boot_device->DeviceName); + break; + case MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED: + break; + } + + return rc; +} + +/** + * _scsih_determine_boot_device - determine boot device. + * @ioc: per adapter object + * @device: either sas_device or raid_device object + * @is_raid: [flag] 1 = raid object, 0 = sas object + * + * Determines whether this device should be first reported device to + * to scsi-ml or sas transport, this purpose is for persistant boot device. + * There are primary, alternate, and current entries in bios page 2. The order + * priority is primary, alternate, then current. This routine saves + * the corresponding device object and is_raid flag in the ioc object. + * The saved data to be used later in _scsih_probe_boot_devices(). + */ +static void +_scsih_determine_boot_device(struct MPT2SAS_ADAPTER *ioc, + void *device, u8 is_raid) +{ + struct _sas_device *sas_device; + struct _raid_device *raid_device; + u64 sas_address; + u64 device_name; + u64 enclosure_logical_id; + u16 slot; + + /* only process this function when driver loads */ + if (!ioc->wait_for_port_enable_to_complete) + return; + + if (!is_raid) { + sas_device = device; + sas_address = sas_device->sas_address; + device_name = sas_device->device_name; + enclosure_logical_id = sas_device->enclosure_logical_id; + slot = sas_device->slot; + } else { + raid_device = device; + sas_address = raid_device->wwid; + device_name = 0; + enclosure_logical_id = 0; + slot = 0; + } + + if (!ioc->req_boot_device.device) { + if (_scsih_is_boot_device(sas_address, device_name, + enclosure_logical_id, slot, + (ioc->bios_pg2.ReqBootDeviceForm & + MPI2_BIOSPAGE2_FORM_MASK), + &ioc->bios_pg2.RequestedBootDevice)) { + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "%s: req_boot_device(0x%016llx)\n", + ioc->name, __func__, + (unsigned long long)sas_address)); + ioc->req_boot_device.device = device; + ioc->req_boot_device.is_raid = is_raid; + } + } + + if (!ioc->req_alt_boot_device.device) { + if (_scsih_is_boot_device(sas_address, device_name, + enclosure_logical_id, slot, + (ioc->bios_pg2.ReqAltBootDeviceForm & + MPI2_BIOSPAGE2_FORM_MASK), + &ioc->bios_pg2.RequestedAltBootDevice)) { + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "%s: req_alt_boot_device(0x%016llx)\n", + ioc->name, __func__, + (unsigned long long)sas_address)); + ioc->req_alt_boot_device.device = device; + ioc->req_alt_boot_device.is_raid = is_raid; + } + } + + if (!ioc->current_boot_device.device) { + if (_scsih_is_boot_device(sas_address, device_name, + enclosure_logical_id, slot, + (ioc->bios_pg2.CurrentBootDeviceForm & + MPI2_BIOSPAGE2_FORM_MASK), + &ioc->bios_pg2.CurrentBootDevice)) { + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "%s: current_boot_device(0x%016llx)\n", + ioc->name, __func__, + (unsigned long long)sas_address)); + ioc->current_boot_device.device = device; + ioc->current_boot_device.is_raid = is_raid; + } + } +} + +/** + * mpt2sas_scsih_sas_device_find_by_sas_address - sas device search + * @ioc: per adapter object + * @sas_address: sas address + * Context: Calling function should acquire ioc->sas_device_lock + * + * This searches for sas_device based on sas_address, then return sas_device + * object. + */ +struct _sas_device * +mpt2sas_scsih_sas_device_find_by_sas_address(struct MPT2SAS_ADAPTER *ioc, + u64 sas_address) +{ + struct _sas_device *sas_device, *r; + + r = NULL; + /* check the sas_device_init_list */ + list_for_each_entry(sas_device, &ioc->sas_device_init_list, + list) { + if (sas_device->sas_address != sas_address) + continue; + r = sas_device; + goto out; + } + + /* then check the sas_device_list */ + list_for_each_entry(sas_device, &ioc->sas_device_list, list) { + if (sas_device->sas_address != sas_address) + continue; + r = sas_device; + goto out; + } + out: + return r; +} + +/** + * _scsih_sas_device_find_by_handle - sas device search + * @ioc: per adapter object + * @handle: sas device handle (assigned by firmware) + * Context: Calling function should acquire ioc->sas_device_lock + * + * This searches for sas_device based on sas_address, then return sas_device + * object. + */ +static struct _sas_device * +_scsih_sas_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct _sas_device *sas_device, *r; + + r = NULL; + if (ioc->wait_for_port_enable_to_complete) { + list_for_each_entry(sas_device, &ioc->sas_device_init_list, + list) { + if (sas_device->handle != handle) + continue; + r = sas_device; + goto out; + } + } else { + list_for_each_entry(sas_device, &ioc->sas_device_list, list) { + if (sas_device->handle != handle) + continue; + r = sas_device; + goto out; + } + } + + out: + return r; +} + +/** + * _scsih_sas_device_remove - remove sas_device from list. + * @ioc: per adapter object + * @sas_device: the sas_device object + * Context: This function will acquire ioc->sas_device_lock. + * + * Removing object and freeing associated memory from the ioc->sas_device_list. + */ +static void +_scsih_sas_device_remove(struct MPT2SAS_ADAPTER *ioc, + struct _sas_device *sas_device) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_del(&sas_device->list); + memset(sas_device, 0, sizeof(struct _sas_device)); + kfree(sas_device); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); +} + +/** + * _scsih_sas_device_add - insert sas_device to the list. + * @ioc: per adapter object + * @sas_device: the sas_device object + * Context: This function will acquire ioc->sas_device_lock. + * + * Adding new object to the ioc->sas_device_list. + */ +static void +_scsih_sas_device_add(struct MPT2SAS_ADAPTER *ioc, + struct _sas_device *sas_device) +{ + unsigned long flags; + u16 handle, parent_handle; + u64 sas_address; + + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle" + "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__, + sas_device->handle, (unsigned long long)sas_device->sas_address)); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_add_tail(&sas_device->list, &ioc->sas_device_list); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + handle = sas_device->handle; + parent_handle = sas_device->parent_handle; + sas_address = sas_device->sas_address; + if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) { + _scsih_sas_device_remove(ioc, sas_device); + } else if (!sas_device->starget) { + mpt2sas_transport_port_remove(ioc, sas_address, parent_handle); + _scsih_sas_device_remove(ioc, sas_device); + } +} + +/** + * _scsih_sas_device_init_add - insert sas_device to the list. + * @ioc: per adapter object + * @sas_device: the sas_device object + * Context: This function will acquire ioc->sas_device_lock. + * + * Adding new object at driver load time to the ioc->sas_device_init_list. + */ +static void +_scsih_sas_device_init_add(struct MPT2SAS_ADAPTER *ioc, + struct _sas_device *sas_device) +{ + unsigned long flags; + + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle" + "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__, + sas_device->handle, (unsigned long long)sas_device->sas_address)); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_add_tail(&sas_device->list, &ioc->sas_device_init_list); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + _scsih_determine_boot_device(ioc, sas_device, 0); +} + +/** + * mpt2sas_scsih_expander_find_by_handle - expander device search + * @ioc: per adapter object + * @handle: expander handle (assigned by firmware) + * Context: Calling function should acquire ioc->sas_device_lock + * + * This searches for expander device based on handle, then returns the + * sas_node object. + */ +struct _sas_node * +mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct _sas_node *sas_expander, *r; + + r = NULL; + list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) { + if (sas_expander->handle != handle) + continue; + r = sas_expander; + goto out; + } + out: + return r; +} + +/** + * _scsih_raid_device_find_by_id - raid device search + * @ioc: per adapter object + * @id: sas device target id + * @channel: sas device channel + * Context: Calling function should acquire ioc->raid_device_lock + * + * This searches for raid_device based on target id, then return raid_device + * object. + */ +static struct _raid_device * +_scsih_raid_device_find_by_id(struct MPT2SAS_ADAPTER *ioc, int id, int channel) +{ + struct _raid_device *raid_device, *r; + + r = NULL; + list_for_each_entry(raid_device, &ioc->raid_device_list, list) { + if (raid_device->id == id && raid_device->channel == channel) { + r = raid_device; + goto out; + } + } + + out: + return r; +} + +/** + * _scsih_raid_device_find_by_handle - raid device search + * @ioc: per adapter object + * @handle: sas device handle (assigned by firmware) + * Context: Calling function should acquire ioc->raid_device_lock + * + * This searches for raid_device based on handle, then return raid_device + * object. + */ +static struct _raid_device * +_scsih_raid_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct _raid_device *raid_device, *r; + + r = NULL; + list_for_each_entry(raid_device, &ioc->raid_device_list, list) { + if (raid_device->handle != handle) + continue; + r = raid_device; + goto out; + } + + out: + return r; +} + +/** + * _scsih_raid_device_find_by_wwid - raid device search + * @ioc: per adapter object + * @handle: sas device handle (assigned by firmware) + * Context: Calling function should acquire ioc->raid_device_lock + * + * This searches for raid_device based on wwid, then return raid_device + * object. + */ +static struct _raid_device * +_scsih_raid_device_find_by_wwid(struct MPT2SAS_ADAPTER *ioc, u64 wwid) +{ + struct _raid_device *raid_device, *r; + + r = NULL; + list_for_each_entry(raid_device, &ioc->raid_device_list, list) { + if (raid_device->wwid != wwid) + continue; + r = raid_device; + goto out; + } + + out: + return r; +} + +/** + * _scsih_raid_device_add - add raid_device object + * @ioc: per adapter object + * @raid_device: raid_device object + * + * This is added to the raid_device_list link list. + */ +static void +_scsih_raid_device_add(struct MPT2SAS_ADAPTER *ioc, + struct _raid_device *raid_device) +{ + unsigned long flags; + + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle" + "(0x%04x), wwid(0x%016llx)\n", ioc->name, __func__, + raid_device->handle, (unsigned long long)raid_device->wwid)); + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + list_add_tail(&raid_device->list, &ioc->raid_device_list); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); +} + +/** + * _scsih_raid_device_remove - delete raid_device object + * @ioc: per adapter object + * @raid_device: raid_device object + * + * This is removed from the raid_device_list link list. + */ +static void +_scsih_raid_device_remove(struct MPT2SAS_ADAPTER *ioc, + struct _raid_device *raid_device) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + list_del(&raid_device->list); + memset(raid_device, 0, sizeof(struct _raid_device)); + kfree(raid_device); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); +} + +/** + * mpt2sas_scsih_expander_find_by_sas_address - expander device search + * @ioc: per adapter object + * @sas_address: sas address + * Context: Calling function should acquire ioc->sas_node_lock. + * + * This searches for expander device based on sas_address, then returns the + * sas_node object. + */ +struct _sas_node * +mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAPTER *ioc, + u64 sas_address) +{ + struct _sas_node *sas_expander, *r; + + r = NULL; + list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) { + if (sas_expander->sas_address != sas_address) + continue; + r = sas_expander; + goto out; + } + out: + return r; +} + +/** + * _scsih_expander_node_add - insert expander device to the list. + * @ioc: per adapter object + * @sas_expander: the sas_device object + * Context: This function will acquire ioc->sas_node_lock. + * + * Adding new object to the ioc->sas_expander_list. + * + * Return nothing. + */ +static void +_scsih_expander_node_add(struct MPT2SAS_ADAPTER *ioc, + struct _sas_node *sas_expander) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + list_add_tail(&sas_expander->list, &ioc->sas_expander_list); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); +} + +/** + * _scsih_is_end_device - determines if device is an end device + * @device_info: bitfield providing information about the device. + * Context: none + * + * Returns 1 if end device. + */ +static int +_scsih_is_end_device(u32 device_info) +{ + if (device_info & MPI2_SAS_DEVICE_INFO_END_DEVICE && + ((device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) | + (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) | + (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE))) + return 1; + else + return 0; +} + +/** + * _scsih_scsi_lookup_get - returns scmd entry + * @ioc: per adapter object + * @smid: system request message index + * Context: This function will acquire ioc->scsi_lookup_lock. + * + * Returns the smid stored scmd pointer. + */ +static struct scsi_cmnd * +_scsih_scsi_lookup_get(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + unsigned long flags; + struct scsi_cmnd *scmd; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + scmd = ioc->scsi_lookup[smid - 1].scmd; + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return scmd; +} + +/** + * mptscsih_getclear_scsi_lookup - returns scmd entry + * @ioc: per adapter object + * @smid: system request message index + * Context: This function will acquire ioc->scsi_lookup_lock. + * + * Returns the smid stored scmd pointer, as well as clearing the scmd pointer. + */ +static struct scsi_cmnd * +_scsih_scsi_lookup_getclear(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + unsigned long flags; + struct scsi_cmnd *scmd; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + scmd = ioc->scsi_lookup[smid - 1].scmd; + ioc->scsi_lookup[smid - 1].scmd = NULL; + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return scmd; +} + +/** + * _scsih_scsi_lookup_set - updates scmd entry in lookup + * @ioc: per adapter object + * @smid: system request message index + * @scmd: pointer to scsi command object + * Context: This function will acquire ioc->scsi_lookup_lock. + * + * This will save scmd pointer in the scsi_lookup array. + * + * Return nothing. + */ +static void +_scsih_scsi_lookup_set(struct MPT2SAS_ADAPTER *ioc, u16 smid, + struct scsi_cmnd *scmd) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + ioc->scsi_lookup[smid - 1].scmd = scmd; + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); +} + +/** + * _scsih_scsi_lookup_find_by_scmd - scmd lookup + * @ioc: per adapter object + * @smid: system request message index + * @scmd: pointer to scsi command object + * Context: This function will acquire ioc->scsi_lookup_lock. + * + * This will search for a scmd pointer in the scsi_lookup array, + * returning the revelent smid. A returned value of zero means invalid. + */ +static u16 +_scsih_scsi_lookup_find_by_scmd(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd + *scmd) +{ + u16 smid; + unsigned long flags; + int i; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + smid = 0; + for (i = 0; i < ioc->request_depth; i++) { + if (ioc->scsi_lookup[i].scmd == scmd) { + smid = i + 1; + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return smid; +} + +/** + * _scsih_scsi_lookup_find_by_target - search for matching channel:id + * @ioc: per adapter object + * @id: target id + * @channel: channel + * Context: This function will acquire ioc->scsi_lookup_lock. + * + * This will search for a matching channel:id in the scsi_lookup array, + * returning 1 if found. + */ +static u8 +_scsih_scsi_lookup_find_by_target(struct MPT2SAS_ADAPTER *ioc, int id, + int channel) +{ + u8 found; + unsigned long flags; + int i; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + found = 0; + for (i = 0 ; i < ioc->request_depth; i++) { + if (ioc->scsi_lookup[i].scmd && + (ioc->scsi_lookup[i].scmd->device->id == id && + ioc->scsi_lookup[i].scmd->device->channel == channel)) { + found = 1; + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return found; +} + +/** + * _scsih_get_chain_buffer_dma - obtain block of chains (dma address) + * @ioc: per adapter object + * @smid: system request message index + * + * Returns phys pointer to chain buffer. + */ +static dma_addr_t +_scsih_get_chain_buffer_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + return ioc->chain_dma + ((smid - 1) * (ioc->request_sz * + ioc->chains_needed_per_io)); +} + +/** + * _scsih_get_chain_buffer - obtain block of chains assigned to a mf request + * @ioc: per adapter object + * @smid: system request message index + * + * Returns virt pointer to chain buffer. + */ +static void * +_scsih_get_chain_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + return (void *)(ioc->chain + ((smid - 1) * (ioc->request_sz * + ioc->chains_needed_per_io))); +} + +/** + * _scsih_build_scatter_gather - main sg creation routine + * @ioc: per adapter object + * @scmd: scsi command + * @smid: system request message index + * Context: none. + * + * The main routine that builds scatter gather table from a given + * scsi request sent via the .queuecommand main handler. + * + * Returns 0 success, anything else error + */ +static int +_scsih_build_scatter_gather(struct MPT2SAS_ADAPTER *ioc, + struct scsi_cmnd *scmd, u16 smid) +{ + Mpi2SCSIIORequest_t *mpi_request; + dma_addr_t chain_dma; + struct scatterlist *sg_scmd; + void *sg_local, *chain; + u32 chain_offset; + u32 chain_length; + u32 chain_flags; + u32 sges_left; + u32 sges_in_segment; + u32 sgl_flags; + u32 sgl_flags_last_element; + u32 sgl_flags_end_buffer; + + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + + /* init scatter gather flags */ + sgl_flags = MPI2_SGE_FLAGS_SIMPLE_ELEMENT; + if (scmd->sc_data_direction == DMA_TO_DEVICE) + sgl_flags |= MPI2_SGE_FLAGS_HOST_TO_IOC; + sgl_flags_last_element = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT) + << MPI2_SGE_FLAGS_SHIFT; + sgl_flags_end_buffer = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT | + MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST) + << MPI2_SGE_FLAGS_SHIFT; + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + + sg_scmd = scsi_sglist(scmd); + sges_left = scsi_dma_map(scmd); + if (!sges_left) { + sdev_printk(KERN_ERR, scmd->device, "pci_map_sg" + " failed: request for %d bytes!\n", scsi_bufflen(scmd)); + return -ENOMEM; + } + + sg_local = &mpi_request->SGL; + sges_in_segment = ioc->max_sges_in_main_message; + if (sges_left <= sges_in_segment) + goto fill_in_last_segment; + + mpi_request->ChainOffset = (offsetof(Mpi2SCSIIORequest_t, SGL) + + (sges_in_segment * ioc->sge_size))/4; + + /* fill in main message segment when there is a chain following */ + while (sges_in_segment) { + if (sges_in_segment == 1) + ioc->base_add_sg_single(sg_local, + sgl_flags_last_element | sg_dma_len(sg_scmd), + sg_dma_address(sg_scmd)); + else + ioc->base_add_sg_single(sg_local, sgl_flags | + sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); + sg_scmd = sg_next(sg_scmd); + sg_local += ioc->sge_size; + sges_left--; + sges_in_segment--; + } + + /* initializing the chain flags and pointers */ + chain_flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT << MPI2_SGE_FLAGS_SHIFT; + chain = _scsih_get_chain_buffer(ioc, smid); + chain_dma = _scsih_get_chain_buffer_dma(ioc, smid); + do { + sges_in_segment = (sges_left <= + ioc->max_sges_in_chain_message) ? sges_left : + ioc->max_sges_in_chain_message; + chain_offset = (sges_left == sges_in_segment) ? + 0 : (sges_in_segment * ioc->sge_size)/4; + chain_length = sges_in_segment * ioc->sge_size; + if (chain_offset) { + chain_offset = chain_offset << + MPI2_SGE_CHAIN_OFFSET_SHIFT; + chain_length += ioc->sge_size; + } + ioc->base_add_sg_single(sg_local, chain_flags | chain_offset | + chain_length, chain_dma); + sg_local = chain; + if (!chain_offset) + goto fill_in_last_segment; + + /* fill in chain segments */ + while (sges_in_segment) { + if (sges_in_segment == 1) + ioc->base_add_sg_single(sg_local, + sgl_flags_last_element | + sg_dma_len(sg_scmd), + sg_dma_address(sg_scmd)); + else + ioc->base_add_sg_single(sg_local, sgl_flags | + sg_dma_len(sg_scmd), + sg_dma_address(sg_scmd)); + sg_scmd = sg_next(sg_scmd); + sg_local += ioc->sge_size; + sges_left--; + sges_in_segment--; + } + + chain_dma += ioc->request_sz; + chain += ioc->request_sz; + } while (1); + + + fill_in_last_segment: + + /* fill the last segment */ + while (sges_left) { + if (sges_left == 1) + ioc->base_add_sg_single(sg_local, sgl_flags_end_buffer | + sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); + else + ioc->base_add_sg_single(sg_local, sgl_flags | + sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); + sg_scmd = sg_next(sg_scmd); + sg_local += ioc->sge_size; + sges_left--; + } + + return 0; +} + +/** + * scsih_change_queue_depth - setting device queue depth + * @sdev: scsi device struct + * @qdepth: requested queue depth + * + * Returns queue depth. + */ +static int +scsih_change_queue_depth(struct scsi_device *sdev, int qdepth) +{ + struct Scsi_Host *shost = sdev->host; + int max_depth; + int tag_type; + + max_depth = shost->can_queue; + if (!sdev->tagged_supported) + max_depth = 1; + if (qdepth > max_depth) + qdepth = max_depth; + tag_type = (qdepth == 1) ? 0 : MSG_SIMPLE_TAG; + scsi_adjust_queue_depth(sdev, tag_type, qdepth); + + if (sdev->inquiry_len > 7) + sdev_printk(KERN_INFO, sdev, "qdepth(%d), tagged(%d), " + "simple(%d), ordered(%d), scsi_level(%d), cmd_que(%d)\n", + sdev->queue_depth, sdev->tagged_supported, sdev->simple_tags, + sdev->ordered_tags, sdev->scsi_level, + (sdev->inquiry[7] & 2) >> 1); + + return sdev->queue_depth; +} + +/** + * scsih_change_queue_depth - changing device queue tag type + * @sdev: scsi device struct + * @tag_type: requested tag type + * + * Returns queue tag type. + */ +static int +scsih_change_queue_type(struct scsi_device *sdev, int tag_type) +{ + if (sdev->tagged_supported) { + scsi_set_tag_type(sdev, tag_type); + if (tag_type) + scsi_activate_tcq(sdev, sdev->queue_depth); + else + scsi_deactivate_tcq(sdev, sdev->queue_depth); + } else + tag_type = 0; + + return tag_type; +} + +/** + * scsih_target_alloc - target add routine + * @starget: scsi target struct + * + * Returns 0 if ok. Any other return is assumed to be an error and + * the device is ignored. + */ +static int +scsih_target_alloc(struct scsi_target *starget) +{ + struct Scsi_Host *shost = dev_to_shost(&starget->dev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + struct MPT2SAS_TARGET *sas_target_priv_data; + struct _sas_device *sas_device; + struct _raid_device *raid_device; + unsigned long flags; + struct sas_rphy *rphy; + + sas_target_priv_data = kzalloc(sizeof(struct scsi_target), GFP_KERNEL); + if (!sas_target_priv_data) + return -ENOMEM; + + starget->hostdata = sas_target_priv_data; + sas_target_priv_data->starget = starget; + sas_target_priv_data->handle = MPT2SAS_INVALID_DEVICE_HANDLE; + + /* RAID volumes */ + if (starget->channel == RAID_CHANNEL) { + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_id(ioc, starget->id, + starget->channel); + if (raid_device) { + sas_target_priv_data->handle = raid_device->handle; + sas_target_priv_data->sas_address = raid_device->wwid; + sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME; + raid_device->starget = starget; + } + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + return 0; + } + + /* sas/sata devices */ + spin_lock_irqsave(&ioc->sas_device_lock, flags); + rphy = dev_to_rphy(starget->dev.parent); + sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + rphy->identify.sas_address); + + if (sas_device) { + sas_target_priv_data->handle = sas_device->handle; + sas_target_priv_data->sas_address = sas_device->sas_address; + sas_device->starget = starget; + sas_device->id = starget->id; + sas_device->channel = starget->channel; + if (sas_device->hidden_raid_component) + sas_target_priv_data->flags |= + MPT_TARGET_FLAGS_RAID_COMPONENT; + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + return 0; +} + +/** + * scsih_target_destroy - target destroy routine + * @starget: scsi target struct + * + * Returns nothing. + */ +static void +scsih_target_destroy(struct scsi_target *starget) +{ + struct Scsi_Host *shost = dev_to_shost(&starget->dev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + struct MPT2SAS_TARGET *sas_target_priv_data; + struct _sas_device *sas_device; + struct _raid_device *raid_device; + unsigned long flags; + struct sas_rphy *rphy; + + sas_target_priv_data = starget->hostdata; + if (!sas_target_priv_data) + return; + + if (starget->channel == RAID_CHANNEL) { + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_id(ioc, starget->id, + starget->channel); + if (raid_device) { + raid_device->starget = NULL; + raid_device->sdev = NULL; + } + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + goto out; + } + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + rphy = dev_to_rphy(starget->dev.parent); + sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + rphy->identify.sas_address); + if (sas_device) + sas_device->starget = NULL; + + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + out: + kfree(sas_target_priv_data); + starget->hostdata = NULL; +} + +/** + * scsih_slave_alloc - device add routine + * @sdev: scsi device struct + * + * Returns 0 if ok. Any other return is assumed to be an error and + * the device is ignored. + */ +static int +scsih_slave_alloc(struct scsi_device *sdev) +{ + struct Scsi_Host *shost; + struct MPT2SAS_ADAPTER *ioc; + struct MPT2SAS_TARGET *sas_target_priv_data; + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct scsi_target *starget; + struct _raid_device *raid_device; + struct _sas_device *sas_device; + unsigned long flags; + + sas_device_priv_data = kzalloc(sizeof(struct scsi_device), GFP_KERNEL); + if (!sas_device_priv_data) + return -ENOMEM; + + sas_device_priv_data->lun = sdev->lun; + sas_device_priv_data->flags = MPT_DEVICE_FLAGS_INIT; + + starget = scsi_target(sdev); + sas_target_priv_data = starget->hostdata; + sas_target_priv_data->num_luns++; + sas_device_priv_data->sas_target = sas_target_priv_data; + sdev->hostdata = sas_device_priv_data; + if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT)) + sdev->no_uld_attach = 1; + + shost = dev_to_shost(&starget->dev); + ioc = shost_priv(shost); + if (starget->channel == RAID_CHANNEL) { + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_id(ioc, + starget->id, starget->channel); + if (raid_device) + raid_device->sdev = sdev; /* raid is single lun */ + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + } else { + /* set TLR bit for SSP devices */ + if (!(ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_TLR)) + goto out; + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + sas_device_priv_data->sas_target->sas_address); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (sas_device && sas_device->device_info & + MPI2_SAS_DEVICE_INFO_SSP_TARGET) + sas_device_priv_data->flags |= MPT_DEVICE_TLR_ON; + } + + out: + return 0; +} + +/** + * scsih_slave_destroy - device destroy routine + * @sdev: scsi device struct + * + * Returns nothing. + */ +static void +scsih_slave_destroy(struct scsi_device *sdev) +{ + struct MPT2SAS_TARGET *sas_target_priv_data; + struct scsi_target *starget; + + if (!sdev->hostdata) + return; + + starget = scsi_target(sdev); + sas_target_priv_data = starget->hostdata; + sas_target_priv_data->num_luns--; + kfree(sdev->hostdata); + sdev->hostdata = NULL; +} + +/** + * scsih_display_sata_capabilities - sata capabilities + * @ioc: per adapter object + * @sas_device: the sas_device object + * @sdev: scsi device struct + */ +static void +scsih_display_sata_capabilities(struct MPT2SAS_ADAPTER *ioc, + struct _sas_device *sas_device, struct scsi_device *sdev) +{ + Mpi2ConfigReply_t mpi_reply; + Mpi2SasDevicePage0_t sas_device_pg0; + u32 ioc_status; + u16 flags; + u32 device_info; + + if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, + MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, sas_device->handle))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + flags = le16_to_cpu(sas_device_pg0.Flags); + device_info = le16_to_cpu(sas_device_pg0.DeviceInfo); + + sdev_printk(KERN_INFO, sdev, + "atapi(%s), ncq(%s), asyn_notify(%s), smart(%s), fua(%s), " + "sw_preserve(%s)\n", + (device_info & MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE) ? "y" : "n", + (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED) ? "y" : "n", + (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY) ? "y" : + "n", + (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED) ? "y" : "n", + (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED) ? "y" : "n", + (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE) ? "y" : "n"); +} + +/** + * _scsih_get_volume_capabilities - volume capabilities + * @ioc: per adapter object + * @sas_device: the raid_device object + */ +static void +_scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc, + struct _raid_device *raid_device) +{ + Mpi2RaidVolPage0_t *vol_pg0; + Mpi2RaidPhysDiskPage0_t pd_pg0; + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2ConfigReply_t mpi_reply; + u16 sz; + u8 num_pds; + + if ((mpt2sas_config_get_number_pds(ioc, raid_device->handle, + &num_pds)) || !num_pds) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + raid_device->num_pds = num_pds; + sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds * + sizeof(Mpi2RaidVol0PhysDisk_t)); + vol_pg0 = kzalloc(sz, GFP_KERNEL); + if (!vol_pg0) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + if ((mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0, + MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + kfree(vol_pg0); + return; + } + + raid_device->volume_type = vol_pg0->VolumeType; + + /* figure out what the underlying devices are by + * obtaining the device_info bits for the 1st device + */ + if (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply, + &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM, + vol_pg0->PhysDisk[0].PhysDiskNum))) { + if (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, + &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, + le16_to_cpu(pd_pg0.DevHandle)))) { + raid_device->device_info = + le32_to_cpu(sas_device_pg0.DeviceInfo); + } + } + + kfree(vol_pg0); +} + +/** + * scsih_slave_configure - device configure routine. + * @sdev: scsi device struct + * + * Returns 0 if ok. Any other return is assumed to be an error and + * the device is ignored. + */ +static int +scsih_slave_configure(struct scsi_device *sdev) +{ + struct Scsi_Host *shost = sdev->host; + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct MPT2SAS_TARGET *sas_target_priv_data; + struct _sas_device *sas_device; + struct _raid_device *raid_device; + unsigned long flags; + int qdepth; + u8 ssp_target = 0; + char *ds = ""; + char *r_level = ""; + + qdepth = 1; + sas_device_priv_data = sdev->hostdata; + sas_device_priv_data->configured_lun = 1; + sas_device_priv_data->flags &= ~MPT_DEVICE_FLAGS_INIT; + sas_target_priv_data = sas_device_priv_data->sas_target; + + /* raid volume handling */ + if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME) { + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_handle(ioc, + sas_target_priv_data->handle); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + if (!raid_device) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return 0; + } + + _scsih_get_volume_capabilities(ioc, raid_device); + + /* RAID Queue Depth Support + * IS volume = underlying qdepth of drive type, either + * MPT2SAS_SAS_QUEUE_DEPTH or MPT2SAS_SATA_QUEUE_DEPTH + * IM/IME/R10 = 128 (MPT2SAS_RAID_QUEUE_DEPTH) + */ + if (raid_device->device_info & + MPI2_SAS_DEVICE_INFO_SSP_TARGET) { + qdepth = MPT2SAS_SAS_QUEUE_DEPTH; + ds = "SSP"; + } else { + qdepth = MPT2SAS_SATA_QUEUE_DEPTH; + if (raid_device->device_info & + MPI2_SAS_DEVICE_INFO_SATA_DEVICE) + ds = "SATA"; + else + ds = "STP"; + } + + switch (raid_device->volume_type) { + case MPI2_RAID_VOL_TYPE_RAID0: + r_level = "RAID0"; + break; + case MPI2_RAID_VOL_TYPE_RAID1E: + qdepth = MPT2SAS_RAID_QUEUE_DEPTH; + r_level = "RAID1E"; + break; + case MPI2_RAID_VOL_TYPE_RAID1: + qdepth = MPT2SAS_RAID_QUEUE_DEPTH; + r_level = "RAID1"; + break; + case MPI2_RAID_VOL_TYPE_RAID10: + qdepth = MPT2SAS_RAID_QUEUE_DEPTH; + r_level = "RAID10"; + break; + case MPI2_RAID_VOL_TYPE_UNKNOWN: + default: + qdepth = MPT2SAS_RAID_QUEUE_DEPTH; + r_level = "RAIDX"; + break; + } + + sdev_printk(KERN_INFO, sdev, "%s: " + "handle(0x%04x), wwid(0x%016llx), pd_count(%d), type(%s)\n", + r_level, raid_device->handle, + (unsigned long long)raid_device->wwid, + raid_device->num_pds, ds); + scsih_change_queue_depth(sdev, qdepth); + return 0; + } + + /* non-raid handling */ + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + sas_device_priv_data->sas_target->sas_address); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (sas_device) { + if (sas_target_priv_data->flags & + MPT_TARGET_FLAGS_RAID_COMPONENT) { + mpt2sas_config_get_volume_handle(ioc, + sas_device->handle, &sas_device->volume_handle); + mpt2sas_config_get_volume_wwid(ioc, + sas_device->volume_handle, + &sas_device->volume_wwid); + } + if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) { + qdepth = MPT2SAS_SAS_QUEUE_DEPTH; + ssp_target = 1; + ds = "SSP"; + } else { + qdepth = MPT2SAS_SATA_QUEUE_DEPTH; + if (sas_device->device_info & + MPI2_SAS_DEVICE_INFO_STP_TARGET) + ds = "STP"; + else if (sas_device->device_info & + MPI2_SAS_DEVICE_INFO_SATA_DEVICE) + ds = "SATA"; + } + + sdev_printk(KERN_INFO, sdev, "%s: handle(0x%04x), " + "sas_addr(0x%016llx), device_name(0x%016llx)\n", + ds, sas_device->handle, + (unsigned long long)sas_device->sas_address, + (unsigned long long)sas_device->device_name); + sdev_printk(KERN_INFO, sdev, "%s: " + "enclosure_logical_id(0x%016llx), slot(%d)\n", ds, + (unsigned long long) sas_device->enclosure_logical_id, + sas_device->slot); + + if (!ssp_target) + scsih_display_sata_capabilities(ioc, sas_device, sdev); + } + + scsih_change_queue_depth(sdev, qdepth); + + if (ssp_target) + sas_read_port_mode_page(sdev); + return 0; +} + +/** + * scsih_bios_param - fetch head, sector, cylinder info for a disk + * @sdev: scsi device struct + * @bdev: pointer to block device context + * @capacity: device size (in 512 byte sectors) + * @params: three element array to place output: + * params[0] number of heads (max 255) + * params[1] number of sectors (max 63) + * params[2] number of cylinders + * + * Return nothing. + */ +static int +scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev, + sector_t capacity, int params[]) +{ + int heads; + int sectors; + sector_t cylinders; + ulong dummy; + + heads = 64; + sectors = 32; + + dummy = heads * sectors; + cylinders = capacity; + sector_div(cylinders, dummy); + + /* + * Handle extended translation size for logical drives + * > 1Gb + */ + if ((ulong)capacity >= 0x200000) { + heads = 255; + sectors = 63; + dummy = heads * sectors; + cylinders = capacity; + sector_div(cylinders, dummy); + } + + /* return result */ + params[0] = heads; + params[1] = sectors; + params[2] = cylinders; + + return 0; +} + +/** + * _scsih_response_code - translation of device response code + * @ioc: per adapter object + * @response_code: response code returned by the device + * + * Return nothing. + */ +static void +_scsih_response_code(struct MPT2SAS_ADAPTER *ioc, u8 response_code) +{ + char *desc; + + switch (response_code) { + case MPI2_SCSITASKMGMT_RSP_TM_COMPLETE: + desc = "task management request completed"; + break; + case MPI2_SCSITASKMGMT_RSP_INVALID_FRAME: + desc = "invalid frame"; + break; + case MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED: + desc = "task management request not supported"; + break; + case MPI2_SCSITASKMGMT_RSP_TM_FAILED: + desc = "task management request failed"; + break; + case MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED: + desc = "task management request succeeded"; + break; + case MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN: + desc = "invalid lun"; + break; + case 0xA: + desc = "overlapped tag attempted"; + break; + case MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC: + desc = "task queued, however not sent to target"; + break; + default: + desc = "unknown"; + break; + } + printk(MPT2SAS_WARN_FMT "response_code(0x%01x): %s\n", + ioc->name, response_code, desc); +} + +/** + * scsih_tm_done - tm completion routine + * @ioc: per adapter object + * @smid: system request message index + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * Context: none. + * + * The callback handler when using scsih_issue_tm. + * + * Return nothing. + */ +static void +scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + + if (ioc->tm_cmds.status == MPT2_CMD_NOT_USED) + return; + if (ioc->tm_cmds.smid != smid) + return; + ioc->tm_cmds.status |= MPT2_CMD_COMPLETE; + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + if (mpi_reply) { + memcpy(ioc->tm_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); + ioc->tm_cmds.status |= MPT2_CMD_REPLY_VALID; + } + ioc->tm_cmds.status &= ~MPT2_CMD_PENDING; + complete(&ioc->tm_cmds.done); +} + +/** + * mpt2sas_scsih_set_tm_flag - set per target tm_busy + * @ioc: per adapter object + * @handle: device handle + * + * During taskmangement request, we need to freeze the device queue. + */ +void +mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct scsi_device *sdev; + u8 skip = 0; + + shost_for_each_device(sdev, ioc->shost) { + if (skip) + continue; + sas_device_priv_data = sdev->hostdata; + if (!sas_device_priv_data) + continue; + if (sas_device_priv_data->sas_target->handle == handle) { + sas_device_priv_data->sas_target->tm_busy = 1; + skip = 1; + ioc->ignore_loginfos = 1; + } + } +} + +/** + * mpt2sas_scsih_clear_tm_flag - clear per target tm_busy + * @ioc: per adapter object + * @handle: device handle + * + * During taskmangement request, we need to freeze the device queue. + */ +void +mpt2sas_scsih_clear_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct scsi_device *sdev; + u8 skip = 0; + + shost_for_each_device(sdev, ioc->shost) { + if (skip) + continue; + sas_device_priv_data = sdev->hostdata; + if (!sas_device_priv_data) + continue; + if (sas_device_priv_data->sas_target->handle == handle) { + sas_device_priv_data->sas_target->tm_busy = 0; + skip = 1; + ioc->ignore_loginfos = 0; + } + } +} + +/** + * mpt2sas_scsih_issue_tm - main routine for sending tm requests + * @ioc: per adapter struct + * @device_handle: device handle + * @lun: lun number + * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h) + * @smid_task: smid assigned to the task + * @timeout: timeout in seconds + * Context: The calling function needs to acquire the tm_cmds.mutex + * + * A generic API for sending task management requests to firmware. + * + * The ioc->tm_cmds.status flag should be MPT2_CMD_NOT_USED before calling + * this API. + * + * The callback index is set inside `ioc->tm_cb_idx`. + * + * Return nothing. + */ +void +mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun, + u8 type, u16 smid_task, ulong timeout) +{ + Mpi2SCSITaskManagementRequest_t *mpi_request; + Mpi2SCSITaskManagementReply_t *mpi_reply; + u16 smid = 0; + u32 ioc_state; + unsigned long timeleft; + u8 VF_ID = 0; + unsigned long flags; + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->tm_cmds.status != MPT2_CMD_NOT_USED || + ioc->shost_recovery) { + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n", + __func__, ioc->name); + return; + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + ioc_state = mpt2sas_base_get_iocstate(ioc, 0); + if (ioc_state & MPI2_DOORBELL_USED) { + dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "unexpected doorbell " + "active!\n", ioc->name)); + goto issue_host_reset; + } + + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { + mpt2sas_base_fault_info(ioc, ioc_state & + MPI2_DOORBELL_DATA_MASK); + goto issue_host_reset; + } + + smid = mpt2sas_base_get_smid(ioc, ioc->tm_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + return; + } + + dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "sending tm: handle(0x%04x)," + " task_type(0x%02x), smid(%d)\n", ioc->name, handle, type, smid)); + ioc->tm_cmds.status = MPT2_CMD_PENDING; + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->tm_cmds.smid = smid; + memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t)); + mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT; + mpi_request->DevHandle = cpu_to_le16(handle); + mpi_request->TaskType = type; + mpi_request->TaskMID = cpu_to_le16(smid_task); + int_to_scsilun(lun, (struct scsi_lun *)mpi_request->LUN); + mpt2sas_scsih_set_tm_flag(ioc, handle); + mpt2sas_base_put_smid_hi_priority(ioc, smid, VF_ID); + timeleft = wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ); + mpt2sas_scsih_clear_tm_flag(ioc, handle); + if (!(ioc->tm_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SCSITaskManagementRequest_t)/4); + if (!(ioc->tm_cmds.status & MPT2_CMD_RESET)) + goto issue_host_reset; + } + + if (ioc->tm_cmds.status & MPT2_CMD_REPLY_VALID) { + mpi_reply = ioc->tm_cmds.reply; + dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "complete tm: " + "ioc_status(0x%04x), loginfo(0x%08x), term_count(0x%08x)\n", + ioc->name, le16_to_cpu(mpi_reply->IOCStatus), + le32_to_cpu(mpi_reply->IOCLogInfo), + le32_to_cpu(mpi_reply->TerminationCount))); + if (ioc->logging_level & MPT_DEBUG_TM) + _scsih_response_code(ioc, mpi_reply->ResponseCode); + } + return; + issue_host_reset: + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER); +} + +/** + * scsih_abort - eh threads main abort routine + * @sdev: scsi device struct + * + * Returns SUCCESS if command aborted else FAILED + */ +static int +scsih_abort(struct scsi_cmnd *scmd) +{ + struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host); + struct MPT2SAS_DEVICE *sas_device_priv_data; + u16 smid; + u16 handle; + int r; + struct scsi_cmnd *scmd_lookup; + + printk(MPT2SAS_INFO_FMT "attempting task abort! scmd(%p)\n", + ioc->name, scmd); + scsi_print_command(scmd); + + sas_device_priv_data = scmd->device->hostdata; + if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { + printk(MPT2SAS_INFO_FMT "device been deleted! scmd(%p)\n", + ioc->name, scmd); + scmd->result = DID_NO_CONNECT << 16; + scmd->scsi_done(scmd); + r = SUCCESS; + goto out; + } + + /* search for the command */ + smid = _scsih_scsi_lookup_find_by_scmd(ioc, scmd); + if (!smid) { + scmd->result = DID_RESET << 16; + r = SUCCESS; + goto out; + } + + /* for hidden raid components and volumes this is not supported */ + if (sas_device_priv_data->sas_target->flags & + MPT_TARGET_FLAGS_RAID_COMPONENT || + sas_device_priv_data->sas_target->flags & MPT_TARGET_FLAGS_VOLUME) { + scmd->result = DID_RESET << 16; + r = FAILED; + goto out; + } + + mutex_lock(&ioc->tm_cmds.mutex); + handle = sas_device_priv_data->sas_target->handle; + mpt2sas_scsih_issue_tm(ioc, handle, sas_device_priv_data->lun, + MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30); + + /* sanity check - see whether command actually completed */ + scmd_lookup = _scsih_scsi_lookup_get(ioc, smid); + if (scmd_lookup && (scmd_lookup->serial_number == scmd->serial_number)) + r = FAILED; + else + r = SUCCESS; + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; + mutex_unlock(&ioc->tm_cmds.mutex); + + out: + printk(MPT2SAS_INFO_FMT "task abort: %s scmd(%p)\n", + ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); + return r; +} + + +/** + * scsih_dev_reset - eh threads main device reset routine + * @sdev: scsi device struct + * + * Returns SUCCESS if command aborted else FAILED + */ +static int +scsih_dev_reset(struct scsi_cmnd *scmd) +{ + struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host); + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct _sas_device *sas_device; + unsigned long flags; + u16 handle; + int r; + + printk(MPT2SAS_INFO_FMT "attempting target reset! scmd(%p)\n", + ioc->name, scmd); + scsi_print_command(scmd); + + sas_device_priv_data = scmd->device->hostdata; + if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { + printk(MPT2SAS_INFO_FMT "device been deleted! scmd(%p)\n", + ioc->name, scmd); + scmd->result = DID_NO_CONNECT << 16; + scmd->scsi_done(scmd); + r = SUCCESS; + goto out; + } + + /* for hidden raid components obtain the volume_handle */ + handle = 0; + if (sas_device_priv_data->sas_target->flags & + MPT_TARGET_FLAGS_RAID_COMPONENT) { + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, + sas_device_priv_data->sas_target->handle); + if (sas_device) + handle = sas_device->volume_handle; + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + } else + handle = sas_device_priv_data->sas_target->handle; + + if (!handle) { + scmd->result = DID_RESET << 16; + r = FAILED; + goto out; + } + + mutex_lock(&ioc->tm_cmds.mutex); + mpt2sas_scsih_issue_tm(ioc, handle, 0, + MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 30); + + /* + * sanity check see whether all commands to this target been + * completed + */ + if (_scsih_scsi_lookup_find_by_target(ioc, scmd->device->id, + scmd->device->channel)) + r = FAILED; + else + r = SUCCESS; + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; + mutex_unlock(&ioc->tm_cmds.mutex); + + out: + printk(MPT2SAS_INFO_FMT "target reset: %s scmd(%p)\n", + ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); + return r; +} + +/** + * scsih_abort - eh threads main host reset routine + * @sdev: scsi device struct + * + * Returns SUCCESS if command aborted else FAILED + */ +static int +scsih_host_reset(struct scsi_cmnd *scmd) +{ + struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host); + int r, retval; + + printk(MPT2SAS_INFO_FMT "attempting host reset! scmd(%p)\n", + ioc->name, scmd); + scsi_print_command(scmd); + + retval = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + r = (retval < 0) ? FAILED : SUCCESS; + printk(MPT2SAS_INFO_FMT "host reset: %s scmd(%p)\n", + ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); + + return r; +} + +/** + * _scsih_fw_event_add - insert and queue up fw_event + * @ioc: per adapter object + * @fw_event: object describing the event + * Context: This function will acquire ioc->fw_event_lock. + * + * This adds the firmware event object into link list, then queues it up to + * be processed from user context. + * + * Return nothing. + */ +static void +_scsih_fw_event_add(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) +{ + unsigned long flags; + + if (ioc->firmware_event_thread == NULL) + return; + + spin_lock_irqsave(&ioc->fw_event_lock, flags); + list_add_tail(&fw_event->list, &ioc->fw_event_list); + INIT_DELAYED_WORK(&fw_event->work, _firmware_event_work); + queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, 1); + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); +} + +/** + * _scsih_fw_event_free - delete fw_event + * @ioc: per adapter object + * @fw_event: object describing the event + * Context: This function will acquire ioc->fw_event_lock. + * + * This removes firmware event object from link list, frees associated memory. + * + * Return nothing. + */ +static void +_scsih_fw_event_free(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work + *fw_event) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->fw_event_lock, flags); + list_del(&fw_event->list); + kfree(fw_event->event_data); + kfree(fw_event); + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); +} + +/** + * _scsih_fw_event_add - requeue an event + * @ioc: per adapter object + * @fw_event: object describing the event + * Context: This function will acquire ioc->fw_event_lock. + * + * Return nothing. + */ +static void +_scsih_fw_event_requeue(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work + *fw_event, unsigned long delay) +{ + unsigned long flags; + if (ioc->firmware_event_thread == NULL) + return; + + spin_lock_irqsave(&ioc->fw_event_lock, flags); + queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, delay); + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); +} + +/** + * _scsih_fw_event_off - turn flag off preventing event handling + * @ioc: per adapter object + * + * Used to prevent handling of firmware events during adapter reset + * driver unload. + * + * Return nothing. + */ +static void +_scsih_fw_event_off(struct MPT2SAS_ADAPTER *ioc) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->fw_event_lock, flags); + ioc->fw_events_off = 1; + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + +} + +/** + * _scsih_fw_event_on - turn flag on allowing firmware event handling + * @ioc: per adapter object + * + * Returns nothing. + */ +static void +_scsih_fw_event_on(struct MPT2SAS_ADAPTER *ioc) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->fw_event_lock, flags); + ioc->fw_events_off = 0; + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); +} + +/** + * _scsih_ublock_io_device - set the device state to SDEV_RUNNING + * @ioc: per adapter object + * @handle: device handle + * + * During device pull we need to appropiately set the sdev state. + */ +static void +_scsih_ublock_io_device(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct scsi_device *sdev; + + shost_for_each_device(sdev, ioc->shost) { + sas_device_priv_data = sdev->hostdata; + if (!sas_device_priv_data) + continue; + if (!sas_device_priv_data->block) + continue; + if (sas_device_priv_data->sas_target->handle == handle) { + dewtprintk(ioc, sdev_printk(KERN_INFO, sdev, + MPT2SAS_INFO_FMT "SDEV_RUNNING: " + "handle(0x%04x)\n", ioc->name, handle)); + sas_device_priv_data->block = 0; + scsi_device_set_state(sdev, SDEV_RUNNING); + } + } +} + +/** + * _scsih_block_io_device - set the device state to SDEV_BLOCK + * @ioc: per adapter object + * @handle: device handle + * + * During device pull we need to appropiately set the sdev state. + */ +static void +_scsih_block_io_device(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct scsi_device *sdev; + + shost_for_each_device(sdev, ioc->shost) { + sas_device_priv_data = sdev->hostdata; + if (!sas_device_priv_data) + continue; + if (sas_device_priv_data->block) + continue; + if (sas_device_priv_data->sas_target->handle == handle) { + dewtprintk(ioc, sdev_printk(KERN_INFO, sdev, + MPT2SAS_INFO_FMT "SDEV_BLOCK: " + "handle(0x%04x)\n", ioc->name, handle)); + sas_device_priv_data->block = 1; + scsi_device_set_state(sdev, SDEV_BLOCK); + } + } +} + +/** + * _scsih_block_io_to_children_attached_to_ex + * @ioc: per adapter object + * @sas_expander: the sas_device object + * + * This routine set sdev state to SDEV_BLOCK for all devices + * attached to this expander. This function called when expander is + * pulled. + */ +static void +_scsih_block_io_to_children_attached_to_ex(struct MPT2SAS_ADAPTER *ioc, + struct _sas_node *sas_expander) +{ + struct _sas_port *mpt2sas_port; + struct _sas_device *sas_device; + struct _sas_node *expander_sibling; + unsigned long flags; + + if (!sas_expander) + return; + + list_for_each_entry(mpt2sas_port, + &sas_expander->sas_port_list, port_list) { + if (mpt2sas_port->remote_identify.device_type == + SAS_END_DEVICE) { + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = + mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + mpt2sas_port->remote_identify.sas_address); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (!sas_device) + continue; + _scsih_block_io_device(ioc, sas_device->handle); + } + } + + list_for_each_entry(mpt2sas_port, + &sas_expander->sas_port_list, port_list) { + + if (mpt2sas_port->remote_identify.device_type == + MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER || + mpt2sas_port->remote_identify.device_type == + MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER) { + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + expander_sibling = + mpt2sas_scsih_expander_find_by_sas_address( + ioc, mpt2sas_port->remote_identify.sas_address); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + _scsih_block_io_to_children_attached_to_ex(ioc, + expander_sibling); + } + } +} + +/** + * _scsih_block_io_to_children_attached_directly + * @ioc: per adapter object + * @event_data: topology change event data + * + * This routine set sdev state to SDEV_BLOCK for all devices + * direct attached during device pull. + */ +static void +_scsih_block_io_to_children_attached_directly(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventDataSasTopologyChangeList_t *event_data) +{ + int i; + u16 handle; + u16 reason_code; + u8 phy_number; + + for (i = 0; i < event_data->NumEntries; i++) { + handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); + if (!handle) + continue; + phy_number = event_data->StartPhyNum + i; + reason_code = event_data->PHY[i].PhyStatus & + MPI2_EVENT_SAS_TOPO_RC_MASK; + if (reason_code == MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING) + _scsih_block_io_device(ioc, handle); + } +} + +/** + * _scsih_check_topo_delete_events - sanity check on topo events + * @ioc: per adapter object + * @event_data: the event data payload + * + * This routine added to better handle cable breaker. + * + * This handles the case where driver recieves multiple expander + * add and delete events in a single shot. When there is a delete event + * the routine will void any pending add events waiting in the event queue. + * + * Return nothing. + */ +static void +_scsih_check_topo_delete_events(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventDataSasTopologyChangeList_t *event_data) +{ + struct fw_event_work *fw_event; + Mpi2EventDataSasTopologyChangeList_t *local_event_data; + u16 expander_handle; + struct _sas_node *sas_expander; + unsigned long flags; + + expander_handle = le16_to_cpu(event_data->ExpanderDevHandle); + if (expander_handle < ioc->sas_hba.num_phys) { + _scsih_block_io_to_children_attached_directly(ioc, event_data); + return; + } + + if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING + || event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING) { + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc, + expander_handle); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + _scsih_block_io_to_children_attached_to_ex(ioc, sas_expander); + } else if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_RESPONDING) + _scsih_block_io_to_children_attached_directly(ioc, event_data); + + if (event_data->ExpStatus != MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING) + return; + + /* mark ignore flag for pending events */ + spin_lock_irqsave(&ioc->fw_event_lock, flags); + list_for_each_entry(fw_event, &ioc->fw_event_list, list) { + if (fw_event->event != MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST || + fw_event->ignore) + continue; + local_event_data = fw_event->event_data; + if (local_event_data->ExpStatus == + MPI2_EVENT_SAS_TOPO_ES_ADDED || + local_event_data->ExpStatus == + MPI2_EVENT_SAS_TOPO_ES_RESPONDING) { + if (le16_to_cpu(local_event_data->ExpanderDevHandle) == + expander_handle) { + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "setting ignoring flag\n", ioc->name)); + fw_event->ignore = 1; + } + } + } + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); +} + +/** + * _scsih_queue_rescan - queue a topology rescan from user context + * @ioc: per adapter object + * + * Return nothing. + */ +static void +_scsih_queue_rescan(struct MPT2SAS_ADAPTER *ioc) +{ + struct fw_event_work *fw_event; + + if (ioc->wait_for_port_enable_to_complete) + return; + fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); + if (!fw_event) + return; + fw_event->event = MPT2SAS_RESCAN_AFTER_HOST_RESET; + fw_event->ioc = ioc; + _scsih_fw_event_add(ioc, fw_event); +} + +/** + * _scsih_flush_running_cmds - completing outstanding commands. + * @ioc: per adapter object + * + * The flushing out of all pending scmd commands following host reset, + * where all IO is dropped to the floor. + * + * Return nothing. + */ +static void +_scsih_flush_running_cmds(struct MPT2SAS_ADAPTER *ioc) +{ + struct scsi_cmnd *scmd; + u16 smid; + u16 count = 0; + + for (smid = 1; smid <= ioc->request_depth; smid++) { + scmd = _scsih_scsi_lookup_getclear(ioc, smid); + if (!scmd) + continue; + count++; + mpt2sas_base_free_smid(ioc, smid); + scsi_dma_unmap(scmd); + scmd->result = DID_RESET << 16; + scmd->scsi_done(scmd); + } + dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "completing %d cmds\n", + ioc->name, count)); +} + +/** + * mpt2sas_scsih_reset_handler - reset callback handler (for scsih) + * @ioc: per adapter object + * @reset_phase: phase + * + * The handler for doing any required cleanup or initialization. + * + * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET, + * MPT2_IOC_DONE_RESET + * + * Return nothing. + */ +void +mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) +{ + switch (reset_phase) { + case MPT2_IOC_PRE_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_PRE_RESET\n", ioc->name, __func__)); + _scsih_fw_event_off(ioc); + break; + case MPT2_IOC_AFTER_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__)); + if (ioc->tm_cmds.status & MPT2_CMD_PENDING) { + ioc->tm_cmds.status |= MPT2_CMD_RESET; + mpt2sas_base_free_smid(ioc, ioc->tm_cmds.smid); + complete(&ioc->tm_cmds.done); + } + _scsih_fw_event_on(ioc); + _scsih_flush_running_cmds(ioc); + break; + case MPT2_IOC_DONE_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_DONE_RESET\n", ioc->name, __func__)); + _scsih_queue_rescan(ioc); + break; + } +} + +/** + * scsih_qcmd - main scsi request entry point + * @scmd: pointer to scsi command object + * @done: function pointer to be invoked on completion + * + * The callback index is set inside `ioc->scsi_io_cb_idx`. + * + * Returns 0 on success. If there's a failure, return either: + * SCSI_MLQUEUE_DEVICE_BUSY if the device queue is full, or + * SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full + */ +static int +scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *)) +{ + struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host); + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct MPT2SAS_TARGET *sas_target_priv_data; + Mpi2SCSIIORequest_t *mpi_request; + u32 mpi_control; + u16 smid; + unsigned long flags; + + scmd->scsi_done = done; + sas_device_priv_data = scmd->device->hostdata; + if (!sas_device_priv_data) { + scmd->result = DID_NO_CONNECT << 16; + scmd->scsi_done(scmd); + return 0; + } + + sas_target_priv_data = sas_device_priv_data->sas_target; + if (!sas_target_priv_data || sas_target_priv_data->handle == + MPT2SAS_INVALID_DEVICE_HANDLE || sas_target_priv_data->deleted) { + scmd->result = DID_NO_CONNECT << 16; + scmd->scsi_done(scmd); + return 0; + } + + /* see if we are busy with task managment stuff */ + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (sas_target_priv_data->tm_busy || + ioc->shost_recovery || ioc->ioc_link_reset_in_progress) { + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + return SCSI_MLQUEUE_HOST_BUSY; + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + if (scmd->sc_data_direction == DMA_FROM_DEVICE) + mpi_control = MPI2_SCSIIO_CONTROL_READ; + else if (scmd->sc_data_direction == DMA_TO_DEVICE) + mpi_control = MPI2_SCSIIO_CONTROL_WRITE; + else + mpi_control = MPI2_SCSIIO_CONTROL_NODATATRANSFER; + + /* set tags */ + if (!(sas_device_priv_data->flags & MPT_DEVICE_FLAGS_INIT)) { + if (scmd->device->tagged_supported) { + if (scmd->device->ordered_tags) + mpi_control |= MPI2_SCSIIO_CONTROL_ORDEREDQ; + else + mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ; + } else +/* MPI Revision I (UNIT = 0xA) - removed MPI2_SCSIIO_CONTROL_UNTAGGED */ +/* mpi_control |= MPI2_SCSIIO_CONTROL_UNTAGGED; + */ + mpi_control |= (0x500); + + } else + mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ; + + if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON)) + mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON; + + smid = mpt2sas_base_get_smid(ioc, ioc->scsi_io_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + goto out; + } + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + memset(mpi_request, 0, sizeof(Mpi2SCSIIORequest_t)); + mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST; + if (sas_device_priv_data->sas_target->flags & + MPT_TARGET_FLAGS_RAID_COMPONENT) + mpi_request->Function = MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH; + else + mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST; + mpi_request->DevHandle = + cpu_to_le16(sas_device_priv_data->sas_target->handle); + mpi_request->DataLength = cpu_to_le32(scsi_bufflen(scmd)); + mpi_request->Control = cpu_to_le32(mpi_control); + mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len); + mpi_request->MsgFlags = MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR; + mpi_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE; + mpi_request->SenseBufferLowAddress = + (u32)mpt2sas_base_get_sense_buffer_dma(ioc, smid); + mpi_request->SGLOffset0 = offsetof(Mpi2SCSIIORequest_t, SGL) / 4; + mpi_request->SGLFlags = cpu_to_le16(MPI2_SCSIIO_SGLFLAGS_TYPE_MPI + + MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR); + + int_to_scsilun(sas_device_priv_data->lun, (struct scsi_lun *) + mpi_request->LUN); + memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len); + + if (!mpi_request->DataLength) { + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request->SGL); + } else { + if (_scsih_build_scatter_gather(ioc, scmd, smid)) { + mpt2sas_base_free_smid(ioc, smid); + goto out; + } + } + + _scsih_scsi_lookup_set(ioc, smid, scmd); + mpt2sas_base_put_smid_scsi_io(ioc, smid, 0, + sas_device_priv_data->sas_target->handle); + return 0; + + out: + return SCSI_MLQUEUE_HOST_BUSY; +} + +/** + * _scsih_normalize_sense - normalize descriptor and fixed format sense data + * @sense_buffer: sense data returned by target + * @data: normalized skey/asc/ascq + * + * Return nothing. + */ +static void +_scsih_normalize_sense(char *sense_buffer, struct sense_info *data) +{ + if ((sense_buffer[0] & 0x7F) >= 0x72) { + /* descriptor format */ + data->skey = sense_buffer[1] & 0x0F; + data->asc = sense_buffer[2]; + data->ascq = sense_buffer[3]; + } else { + /* fixed format */ + data->skey = sense_buffer[2] & 0x0F; + data->asc = sense_buffer[12]; + data->ascq = sense_buffer[13]; + } +} + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _scsih_scsi_ioc_info - translated non-succesfull SCSI_IO request + * @ioc: per adapter object + * @scmd: pointer to scsi command object + * @mpi_reply: reply mf payload returned from firmware + * + * scsi_status - SCSI Status code returned from target device + * scsi_state - state info associated with SCSI_IO determined by ioc + * ioc_status - ioc supplied status info + * + * Return nothing. + */ +static void +_scsih_scsi_ioc_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, + Mpi2SCSIIOReply_t *mpi_reply, u16 smid) +{ + u32 response_info; + u8 *response_bytes; + u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & + MPI2_IOCSTATUS_MASK; + u8 scsi_state = mpi_reply->SCSIState; + u8 scsi_status = mpi_reply->SCSIStatus; + char *desc_ioc_state = NULL; + char *desc_scsi_status = NULL; + char *desc_scsi_state = ioc->tmp_string; + + switch (ioc_status) { + case MPI2_IOCSTATUS_SUCCESS: + desc_ioc_state = "success"; + break; + case MPI2_IOCSTATUS_INVALID_FUNCTION: + desc_ioc_state = "invalid function"; + break; + case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR: + desc_ioc_state = "scsi recovered error"; + break; + case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE: + desc_ioc_state = "scsi invalid dev handle"; + break; + case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE: + desc_ioc_state = "scsi device not there"; + break; + case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN: + desc_ioc_state = "scsi data overrun"; + break; + case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN: + desc_ioc_state = "scsi data underrun"; + break; + case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR: + desc_ioc_state = "scsi io data error"; + break; + case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR: + desc_ioc_state = "scsi protocol error"; + break; + case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED: + desc_ioc_state = "scsi task terminated"; + break; + case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: + desc_ioc_state = "scsi residual mismatch"; + break; + case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED: + desc_ioc_state = "scsi task mgmt failed"; + break; + case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED: + desc_ioc_state = "scsi ioc terminated"; + break; + case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED: + desc_ioc_state = "scsi ext terminated"; + break; + default: + desc_ioc_state = "unknown"; + break; + } + + switch (scsi_status) { + case MPI2_SCSI_STATUS_GOOD: + desc_scsi_status = "good"; + break; + case MPI2_SCSI_STATUS_CHECK_CONDITION: + desc_scsi_status = "check condition"; + break; + case MPI2_SCSI_STATUS_CONDITION_MET: + desc_scsi_status = "condition met"; + break; + case MPI2_SCSI_STATUS_BUSY: + desc_scsi_status = "busy"; + break; + case MPI2_SCSI_STATUS_INTERMEDIATE: + desc_scsi_status = "intermediate"; + break; + case MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET: + desc_scsi_status = "intermediate condmet"; + break; + case MPI2_SCSI_STATUS_RESERVATION_CONFLICT: + desc_scsi_status = "reservation conflict"; + break; + case MPI2_SCSI_STATUS_COMMAND_TERMINATED: + desc_scsi_status = "command terminated"; + break; + case MPI2_SCSI_STATUS_TASK_SET_FULL: + desc_scsi_status = "task set full"; + break; + case MPI2_SCSI_STATUS_ACA_ACTIVE: + desc_scsi_status = "aca active"; + break; + case MPI2_SCSI_STATUS_TASK_ABORTED: + desc_scsi_status = "task aborted"; + break; + default: + desc_scsi_status = "unknown"; + break; + } + + desc_scsi_state[0] = '\0'; + if (!scsi_state) + desc_scsi_state = " "; + if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) + strcat(desc_scsi_state, "response info "); + if (scsi_state & MPI2_SCSI_STATE_TERMINATED) + strcat(desc_scsi_state, "state terminated "); + if (scsi_state & MPI2_SCSI_STATE_NO_SCSI_STATUS) + strcat(desc_scsi_state, "no status "); + if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_FAILED) + strcat(desc_scsi_state, "autosense failed "); + if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) + strcat(desc_scsi_state, "autosense valid "); + + scsi_print_command(scmd); + printk(MPT2SAS_WARN_FMT "\tdev handle(0x%04x), " + "ioc_status(%s)(0x%04x), smid(%d)\n", ioc->name, + le16_to_cpu(mpi_reply->DevHandle), desc_ioc_state, + ioc_status, smid); + printk(MPT2SAS_WARN_FMT "\trequest_len(%d), underflow(%d), " + "resid(%d)\n", ioc->name, scsi_bufflen(scmd), scmd->underflow, + scsi_get_resid(scmd)); + printk(MPT2SAS_WARN_FMT "\ttag(%d), transfer_count(%d), " + "sc->result(0x%08x)\n", ioc->name, le16_to_cpu(mpi_reply->TaskTag), + le32_to_cpu(mpi_reply->TransferCount), scmd->result); + printk(MPT2SAS_WARN_FMT "\tscsi_status(%s)(0x%02x), " + "scsi_state(%s)(0x%02x)\n", ioc->name, desc_scsi_status, + scsi_status, desc_scsi_state, scsi_state); + + if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) { + struct sense_info data; + _scsih_normalize_sense(scmd->sense_buffer, &data); + printk(MPT2SAS_WARN_FMT "\t[sense_key,asc,ascq]: " + "[0x%02x,0x%02x,0x%02x]\n", ioc->name, data.skey, + data.asc, data.ascq); + } + + if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) { + response_info = le32_to_cpu(mpi_reply->ResponseInfo); + response_bytes = (u8 *)&response_info; + _scsih_response_code(ioc, response_bytes[3]); + } +} +#endif + +/** + * _scsih_smart_predicted_fault - illuminate Fault LED + * @ioc: per adapter object + * @handle: device handle + * + * Return nothing. + */ +static void +_scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + Mpi2SepReply_t mpi_reply; + Mpi2SepRequest_t mpi_request; + struct scsi_target *starget; + struct MPT2SAS_TARGET *sas_target_priv_data; + Mpi2EventNotificationReply_t *event_reply; + Mpi2EventDataSasDeviceStatusChange_t *event_data; + struct _sas_device *sas_device; + ssize_t sz; + unsigned long flags; + + /* only handle non-raid devices */ + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + if (!sas_device) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return; + } + starget = sas_device->starget; + sas_target_priv_data = starget->hostdata; + + if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) || + ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return; + } + starget_printk(KERN_WARNING, starget, "predicted fault\n"); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM) { + memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t)); + mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR; + mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS; + mpi_request.SlotStatus = + MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT; + mpi_request.DevHandle = cpu_to_le16(handle); + mpi_request.Flags = MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS; + if ((mpt2sas_base_scsi_enclosure_processor(ioc, &mpi_reply, + &mpi_request)) != 0) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) { + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT + "enclosure_processor: ioc_status (0x%04x), " + "loginfo(0x%08x)\n", ioc->name, + le16_to_cpu(mpi_reply.IOCStatus), + le32_to_cpu(mpi_reply.IOCLogInfo))); + return; + } + } + + /* insert into event log */ + sz = offsetof(Mpi2EventNotificationReply_t, EventData) + + sizeof(Mpi2EventDataSasDeviceStatusChange_t); + event_reply = kzalloc(sz, GFP_KERNEL); + if (!event_reply) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + event_reply->Function = MPI2_FUNCTION_EVENT_NOTIFICATION; + event_reply->Event = + cpu_to_le16(MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE); + event_reply->MsgLength = sz/4; + event_reply->EventDataLength = + cpu_to_le16(sizeof(Mpi2EventDataSasDeviceStatusChange_t)/4); + event_data = (Mpi2EventDataSasDeviceStatusChange_t *) + event_reply->EventData; + event_data->ReasonCode = MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA; + event_data->ASC = 0x5D; + event_data->DevHandle = cpu_to_le16(handle); + event_data->SASAddress = cpu_to_le64(sas_target_priv_data->sas_address); + mpt2sas_ctl_add_to_event_log(ioc, event_reply); + kfree(event_reply); +} + +/** + * scsih_io_done - scsi request callback + * @ioc: per adapter object + * @smid: system request message index + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * + * Callback handler when using scsih_qcmd. + * + * Return nothing. + */ +static void +scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply) +{ + Mpi2SCSIIORequest_t *mpi_request; + Mpi2SCSIIOReply_t *mpi_reply; + struct scsi_cmnd *scmd; + u16 ioc_status; + u32 xfer_cnt; + u8 scsi_state; + u8 scsi_status; + u32 log_info; + struct MPT2SAS_DEVICE *sas_device_priv_data; + u32 response_code; + + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + scmd = _scsih_scsi_lookup_getclear(ioc, smid); + if (scmd == NULL) + return; + + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + + if (mpi_reply == NULL) { + scmd->result = DID_OK << 16; + goto out; + } + + sas_device_priv_data = scmd->device->hostdata; + if (!sas_device_priv_data || !sas_device_priv_data->sas_target || + sas_device_priv_data->sas_target->deleted) { + scmd->result = DID_NO_CONNECT << 16; + goto out; + } + + /* turning off TLR */ + if (!sas_device_priv_data->tlr_snoop_check) { + sas_device_priv_data->tlr_snoop_check++; + if (sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) { + response_code = (le32_to_cpu(mpi_reply->ResponseInfo) + >> 24); + if (response_code == + MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) + sas_device_priv_data->flags &= + ~MPT_DEVICE_TLR_ON; + } + } + + xfer_cnt = le32_to_cpu(mpi_reply->TransferCount); + scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_cnt); + ioc_status = le16_to_cpu(mpi_reply->IOCStatus); + if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) + log_info = le32_to_cpu(mpi_reply->IOCLogInfo); + else + log_info = 0; + ioc_status &= MPI2_IOCSTATUS_MASK; + scsi_state = mpi_reply->SCSIState; + scsi_status = mpi_reply->SCSIStatus; + + if (ioc_status == MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 && + (scsi_status == MPI2_SCSI_STATUS_BUSY || + scsi_status == MPI2_SCSI_STATUS_RESERVATION_CONFLICT || + scsi_status == MPI2_SCSI_STATUS_TASK_SET_FULL)) { + ioc_status = MPI2_IOCSTATUS_SUCCESS; + } + + if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) { + struct sense_info data; + const void *sense_data = mpt2sas_base_get_sense_buffer(ioc, + smid); + memcpy(scmd->sense_buffer, sense_data, + le32_to_cpu(mpi_reply->SenseCount)); + _scsih_normalize_sense(scmd->sense_buffer, &data); + /* failure prediction threshold exceeded */ + if (data.asc == 0x5D) + _scsih_smart_predicted_fault(ioc, + le16_to_cpu(mpi_reply->DevHandle)); + } + + switch (ioc_status) { + case MPI2_IOCSTATUS_BUSY: + case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES: + scmd->result = SAM_STAT_BUSY; + break; + + case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE: + scmd->result = DID_NO_CONNECT << 16; + break; + + case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED: + if (sas_device_priv_data->block) { + scmd->result = (DID_BUS_BUSY << 16); + break; + } + + case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED: + case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED: + scmd->result = DID_RESET << 16; + break; + + case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: + if ((xfer_cnt == 0) || (scmd->underflow > xfer_cnt)) + scmd->result = DID_SOFT_ERROR << 16; + else + scmd->result = (DID_OK << 16) | scsi_status; + break; + + case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN: + scmd->result = (DID_OK << 16) | scsi_status; + + if ((scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID)) + break; + + if (xfer_cnt < scmd->underflow) { + if (scsi_status == SAM_STAT_BUSY) + scmd->result = SAM_STAT_BUSY; + else + scmd->result = DID_SOFT_ERROR << 16; + } else if (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED | + MPI2_SCSI_STATE_NO_SCSI_STATUS)) + scmd->result = DID_SOFT_ERROR << 16; + else if (scsi_state & MPI2_SCSI_STATE_TERMINATED) + scmd->result = DID_RESET << 16; + else if (!xfer_cnt && scmd->cmnd[0] == REPORT_LUNS) { + mpi_reply->SCSIState = MPI2_SCSI_STATE_AUTOSENSE_VALID; + mpi_reply->SCSIStatus = SAM_STAT_CHECK_CONDITION; + scmd->result = (DRIVER_SENSE << 24) | + SAM_STAT_CHECK_CONDITION; + scmd->sense_buffer[0] = 0x70; + scmd->sense_buffer[2] = ILLEGAL_REQUEST; + scmd->sense_buffer[12] = 0x20; + scmd->sense_buffer[13] = 0; + } + break; + + case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN: + scsi_set_resid(scmd, 0); + case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR: + case MPI2_IOCSTATUS_SUCCESS: + scmd->result = (DID_OK << 16) | scsi_status; + if (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED | + MPI2_SCSI_STATE_NO_SCSI_STATUS)) + scmd->result = DID_SOFT_ERROR << 16; + else if (scsi_state & MPI2_SCSI_STATE_TERMINATED) + scmd->result = DID_RESET << 16; + break; + + case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR: + case MPI2_IOCSTATUS_INVALID_FUNCTION: + case MPI2_IOCSTATUS_INVALID_SGL: + case MPI2_IOCSTATUS_INTERNAL_ERROR: + case MPI2_IOCSTATUS_INVALID_FIELD: + case MPI2_IOCSTATUS_INVALID_STATE: + case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR: + case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED: + default: + scmd->result = DID_SOFT_ERROR << 16; + break; + + } + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if (scmd->result && (ioc->logging_level & MPT_DEBUG_REPLY)) + _scsih_scsi_ioc_info(ioc , scmd, mpi_reply, smid); +#endif + + out: + scsi_dma_unmap(scmd); + scmd->scsi_done(scmd); +} + +/** + * _scsih_link_change - process phy link changes + * @ioc: per adapter object + * @handle: phy handle + * @attached_handle: valid for devices attached to link + * @phy_number: phy number + * @link_rate: new link rate + * Context: user. + * + * Return nothing. + */ +static void +_scsih_link_change(struct MPT2SAS_ADAPTER *ioc, u16 handle, u16 attached_handle, + u8 phy_number, u8 link_rate) +{ + mpt2sas_transport_update_phy_link_change(ioc, handle, attached_handle, + phy_number, link_rate); +} + +/** + * _scsih_sas_host_refresh - refreshing sas host object contents + * @ioc: per adapter object + * @update: update link information + * Context: user + * + * During port enable, fw will send topology events for every device. Its + * possible that the handles may change from the previous setting, so this + * code keeping handles updating if changed. + * + * Return nothing. + */ +static void +_scsih_sas_host_refresh(struct MPT2SAS_ADAPTER *ioc, u8 update) +{ + u16 sz; + u16 ioc_status; + int i; + Mpi2ConfigReply_t mpi_reply; + Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL; + + dtmprintk(ioc, printk(MPT2SAS_INFO_FMT + "updating handles for sas_host(0x%016llx)\n", + ioc->name, (unsigned long long)ioc->sas_hba.sas_address)); + + sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys + * sizeof(Mpi2SasIOUnit0PhyData_t)); + sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg0) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + if (!(mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply, + sas_iounit_pg0, sz))) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) + goto out; + for (i = 0; i < ioc->sas_hba.num_phys ; i++) { + ioc->sas_hba.phy[i].handle = + le16_to_cpu(sas_iounit_pg0->PhyData[i]. + ControllerDevHandle); + if (update) + _scsih_link_change(ioc, + ioc->sas_hba.phy[i].handle, + le16_to_cpu(sas_iounit_pg0->PhyData[i]. + AttachedDevHandle), i, + sas_iounit_pg0->PhyData[i]. + NegotiatedLinkRate >> 4); + } + } + + out: + kfree(sas_iounit_pg0); +} + +/** + * _scsih_sas_host_add - create sas host object + * @ioc: per adapter object + * + * Creating host side data object, stored in ioc->sas_hba + * + * Return nothing. + */ +static void +_scsih_sas_host_add(struct MPT2SAS_ADAPTER *ioc) +{ + int i; + Mpi2ConfigReply_t mpi_reply; + Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL; + Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; + Mpi2SasPhyPage0_t phy_pg0; + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2SasEnclosurePage0_t enclosure_pg0; + u16 ioc_status; + u16 sz; + u16 device_missing_delay; + + mpt2sas_config_get_number_hba_phys(ioc, &ioc->sas_hba.num_phys); + if (!ioc->sas_hba.num_phys) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + /* sas_iounit page 0 */ + sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys * + sizeof(Mpi2SasIOUnit0PhyData_t)); + sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg0) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + if ((mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply, + sas_iounit_pg0, sz))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + + /* sas_iounit page 1 */ + sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys * + sizeof(Mpi2SasIOUnit1PhyData_t)); + sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg1) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, + sas_iounit_pg1, sz))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + + ioc->io_missing_delay = + le16_to_cpu(sas_iounit_pg1->IODeviceMissingDelay); + device_missing_delay = + le16_to_cpu(sas_iounit_pg1->ReportDeviceMissingDelay); + if (device_missing_delay & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16) + ioc->device_missing_delay = (device_missing_delay & + MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16; + else + ioc->device_missing_delay = device_missing_delay & + MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK; + + ioc->sas_hba.parent_dev = &ioc->shost->shost_gendev; + ioc->sas_hba.phy = kcalloc(ioc->sas_hba.num_phys, + sizeof(struct _sas_phy), GFP_KERNEL); + if (!ioc->sas_hba.phy) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + for (i = 0; i < ioc->sas_hba.num_phys ; i++) { + if ((mpt2sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0, + i))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + ioc->sas_hba.phy[i].handle = + le16_to_cpu(sas_iounit_pg0->PhyData[i].ControllerDevHandle); + ioc->sas_hba.phy[i].phy_id = i; + mpt2sas_transport_add_host_phy(ioc, &ioc->sas_hba.phy[i], + phy_pg0, ioc->sas_hba.parent_dev); + } + if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, + MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, ioc->sas_hba.phy[0].handle))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + ioc->sas_hba.handle = le16_to_cpu(sas_device_pg0.DevHandle); + ioc->sas_hba.enclosure_handle = + le16_to_cpu(sas_device_pg0.EnclosureHandle); + ioc->sas_hba.sas_address = le64_to_cpu(sas_device_pg0.SASAddress); + printk(MPT2SAS_INFO_FMT "host_add: handle(0x%04x), " + "sas_addr(0x%016llx), phys(%d)\n", ioc->name, ioc->sas_hba.handle, + (unsigned long long) ioc->sas_hba.sas_address, + ioc->sas_hba.num_phys) ; + + if (ioc->sas_hba.enclosure_handle) { + if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply, + &enclosure_pg0, + MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE, + ioc->sas_hba.enclosure_handle))) { + ioc->sas_hba.enclosure_logical_id = + le64_to_cpu(enclosure_pg0.EnclosureLogicalID); + } + } + + out: + kfree(sas_iounit_pg1); + kfree(sas_iounit_pg0); +} + +/** + * _scsih_expander_add - creating expander object + * @ioc: per adapter object + * @handle: expander handle + * + * Creating expander object, stored in ioc->sas_expander_list. + * + * Return 0 for success, else error. + */ +static int +_scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct _sas_node *sas_expander; + Mpi2ConfigReply_t mpi_reply; + Mpi2ExpanderPage0_t expander_pg0; + Mpi2ExpanderPage1_t expander_pg1; + Mpi2SasEnclosurePage0_t enclosure_pg0; + u32 ioc_status; + u16 parent_handle; + __le64 sas_address; + int i; + unsigned long flags; + struct _sas_port *mpt2sas_port; + int rc = 0; + + if (!handle) + return -1; + + if ((mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0, + MPI2_SAS_EXPAND_PGAD_FORM_HNDL, handle))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + /* handle out of order topology events */ + parent_handle = le16_to_cpu(expander_pg0.ParentDevHandle); + if (parent_handle >= ioc->sas_hba.num_phys) { + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc, + parent_handle); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + if (!sas_expander) { + rc = _scsih_expander_add(ioc, parent_handle); + if (rc != 0) + return rc; + } + } + + sas_address = le64_to_cpu(expander_pg0.SASAddress); + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc, + sas_address); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + if (sas_expander) + return 0; + + sas_expander = kzalloc(sizeof(struct _sas_node), + GFP_KERNEL); + if (!sas_expander) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + sas_expander->handle = handle; + sas_expander->num_phys = expander_pg0.NumPhys; + sas_expander->parent_handle = parent_handle; + sas_expander->enclosure_handle = + le16_to_cpu(expander_pg0.EnclosureHandle); + sas_expander->sas_address = sas_address; + + printk(MPT2SAS_INFO_FMT "expander_add: handle(0x%04x)," + " parent(0x%04x), sas_addr(0x%016llx), phys(%d)\n", ioc->name, + handle, sas_expander->parent_handle, (unsigned long long) + sas_expander->sas_address, sas_expander->num_phys); + + if (!sas_expander->num_phys) + goto out_fail; + sas_expander->phy = kcalloc(sas_expander->num_phys, + sizeof(struct _sas_phy), GFP_KERNEL); + if (!sas_expander->phy) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -1; + goto out_fail; + } + + INIT_LIST_HEAD(&sas_expander->sas_port_list); + mpt2sas_port = mpt2sas_transport_port_add(ioc, handle, + sas_expander->parent_handle); + if (!mpt2sas_port) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -1; + goto out_fail; + } + sas_expander->parent_dev = &mpt2sas_port->rphy->dev; + + for (i = 0 ; i < sas_expander->num_phys ; i++) { + if ((mpt2sas_config_get_expander_pg1(ioc, &mpi_reply, + &expander_pg1, i, handle))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + continue; + } + sas_expander->phy[i].handle = handle; + sas_expander->phy[i].phy_id = i; + mpt2sas_transport_add_expander_phy(ioc, &sas_expander->phy[i], + expander_pg1, sas_expander->parent_dev); + } + + if (sas_expander->enclosure_handle) { + if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply, + &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE, + sas_expander->enclosure_handle))) { + sas_expander->enclosure_logical_id = + le64_to_cpu(enclosure_pg0.EnclosureLogicalID); + } + } + + _scsih_expander_node_add(ioc, sas_expander); + return 0; + + out_fail: + + if (sas_expander) + kfree(sas_expander->phy); + kfree(sas_expander); + return rc; +} + +/** + * _scsih_expander_remove - removing expander object + * @ioc: per adapter object + * @handle: expander handle + * + * Return nothing. + */ +static void +_scsih_expander_remove(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct _sas_node *sas_expander; + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + _scsih_expander_node_remove(ioc, sas_expander); +} + +/** + * _scsih_add_device - creating sas device object + * @ioc: per adapter object + * @handle: sas device handle + * @phy_num: phy number end device attached to + * @is_pd: is this hidden raid component + * + * Creating end device object, stored in ioc->sas_device_list. + * + * Returns 0 for success, non-zero for failure. + */ +static int +_scsih_add_device(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 phy_num, u8 is_pd) +{ + Mpi2ConfigReply_t mpi_reply; + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2SasEnclosurePage0_t enclosure_pg0; + struct _sas_device *sas_device; + u32 ioc_status; + __le64 sas_address; + u32 device_info; + unsigned long flags; + + if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, + MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + /* check if device is present */ + if (!(le16_to_cpu(sas_device_pg0.Flags) & + MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + printk(MPT2SAS_ERR_FMT "Flags = 0x%04x\n", + ioc->name, le16_to_cpu(sas_device_pg0.Flags)); + return -1; + } + + /* check if there were any issus with discovery */ + if (sas_device_pg0.AccessStatus == + MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + printk(MPT2SAS_ERR_FMT "AccessStatus = 0x%02x\n", + ioc->name, sas_device_pg0.AccessStatus); + return -1; + } + + /* check if this is end device */ + device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); + if (!(_scsih_is_end_device(device_info))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + sas_address = le64_to_cpu(sas_device_pg0.SASAddress); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + sas_address); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + if (sas_device) { + _scsih_ublock_io_device(ioc, handle); + return 0; + } + + sas_device = kzalloc(sizeof(struct _sas_device), + GFP_KERNEL); + if (!sas_device) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + sas_device->handle = handle; + sas_device->parent_handle = + le16_to_cpu(sas_device_pg0.ParentDevHandle); + sas_device->enclosure_handle = + le16_to_cpu(sas_device_pg0.EnclosureHandle); + sas_device->slot = + le16_to_cpu(sas_device_pg0.Slot); + sas_device->device_info = device_info; + sas_device->sas_address = sas_address; + sas_device->hidden_raid_component = is_pd; + + /* get enclosure_logical_id */ + if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply, &enclosure_pg0, + MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE, + sas_device->enclosure_handle))) { + sas_device->enclosure_logical_id = + le64_to_cpu(enclosure_pg0.EnclosureLogicalID); + } + + /* get device name */ + sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName); + + if (ioc->wait_for_port_enable_to_complete) + _scsih_sas_device_init_add(ioc, sas_device); + else + _scsih_sas_device_add(ioc, sas_device); + + return 0; +} + +/** + * _scsih_remove_device - removing sas device object + * @ioc: per adapter object + * @handle: sas device handle + * + * Return nothing. + */ +static void +_scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct MPT2SAS_TARGET *sas_target_priv_data; + struct _sas_device *sas_device; + unsigned long flags; + Mpi2SasIoUnitControlReply_t mpi_reply; + Mpi2SasIoUnitControlRequest_t mpi_request; + u16 device_handle; + + /* lookup sas_device */ + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + if (!sas_device) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return; + } + + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter: handle" + "(0x%04x)\n", ioc->name, __func__, handle)); + + if (sas_device->starget && sas_device->starget->hostdata) { + sas_target_priv_data = sas_device->starget->hostdata; + sas_target_priv_data->deleted = 1; + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + if (ioc->remove_host) + goto out; + + /* Target Reset to flush out all the outstanding IO */ + device_handle = (sas_device->hidden_raid_component) ? + sas_device->volume_handle : handle; + if (device_handle) { + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "issue target reset: " + "handle(0x%04x)\n", ioc->name, device_handle)); + mutex_lock(&ioc->tm_cmds.mutex); + mpt2sas_scsih_issue_tm(ioc, device_handle, 0, + MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 10); + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; + mutex_unlock(&ioc->tm_cmds.mutex); + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "issue target reset " + "done: handle(0x%04x)\n", ioc->name, device_handle)); + } + + /* SAS_IO_UNIT_CNTR - send REMOVE_DEVICE */ + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "sas_iounit: handle" + "(0x%04x)\n", ioc->name, handle)); + memset(&mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t)); + mpi_request.Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL; + mpi_request.Operation = MPI2_SAS_OP_REMOVE_DEVICE; + mpi_request.DevHandle = handle; + mpi_request.VF_ID = 0; + if ((mpt2sas_base_sas_iounit_control(ioc, &mpi_reply, + &mpi_request)) != 0) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + } + + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "sas_iounit: ioc_status" + "(0x%04x), loginfo(0x%08x)\n", ioc->name, + le16_to_cpu(mpi_reply.IOCStatus), + le32_to_cpu(mpi_reply.IOCLogInfo))); + + out: + mpt2sas_transport_port_remove(ioc, sas_device->sas_address, + sas_device->parent_handle); + + printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), sas_addr" + "(0x%016llx)\n", ioc->name, sas_device->handle, + (unsigned long long) sas_device->sas_address); + _scsih_sas_device_remove(ioc, sas_device); + + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit: handle" + "(0x%04x)\n", ioc->name, __func__, handle)); +} + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _scsih_sas_topology_change_event_debug - debug for topology event + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + */ +static void +_scsih_sas_topology_change_event_debug(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventDataSasTopologyChangeList_t *event_data) +{ + int i; + u16 handle; + u16 reason_code; + u8 phy_number; + char *status_str = NULL; + char link_rate[25]; + + switch (event_data->ExpStatus) { + case MPI2_EVENT_SAS_TOPO_ES_ADDED: + status_str = "add"; + break; + case MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING: + status_str = "remove"; + break; + case MPI2_EVENT_SAS_TOPO_ES_RESPONDING: + status_str = "responding"; + break; + case MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING: + status_str = "remove delay"; + break; + default: + status_str = "unknown status"; + break; + } + printk(MPT2SAS_DEBUG_FMT "sas topology change: (%s)\n", + ioc->name, status_str); + printk(KERN_DEBUG "\thandle(0x%04x), enclosure_handle(0x%04x) " + "start_phy(%02d), count(%d)\n", + le16_to_cpu(event_data->ExpanderDevHandle), + le16_to_cpu(event_data->EnclosureHandle), + event_data->StartPhyNum, event_data->NumEntries); + for (i = 0; i < event_data->NumEntries; i++) { + handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); + if (!handle) + continue; + phy_number = event_data->StartPhyNum + i; + reason_code = event_data->PHY[i].PhyStatus & + MPI2_EVENT_SAS_TOPO_RC_MASK; + switch (reason_code) { + case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED: + snprintf(link_rate, 25, ": add, link(0x%02x)", + (event_data->PHY[i].LinkRate >> 4)); + status_str = link_rate; + break; + case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING: + status_str = ": remove"; + break; + case MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING: + status_str = ": remove_delay"; + break; + case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED: + snprintf(link_rate, 25, ": link(0x%02x)", + (event_data->PHY[i].LinkRate >> 4)); + status_str = link_rate; + break; + case MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE: + status_str = ": responding"; + break; + default: + status_str = ": unknown"; + break; + } + printk(KERN_DEBUG "\tphy(%02d), attached_handle(0x%04x)%s\n", + phy_number, handle, status_str); + } +} +#endif + +/** + * _scsih_sas_topology_change_event - handle topology changes + * @ioc: per adapter object + * @VF_ID: + * @event_data: event data payload + * fw_event: + * Context: user. + * + */ +static void +_scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataSasTopologyChangeList_t *event_data, + struct fw_event_work *fw_event) +{ + int i; + u16 parent_handle, handle; + u16 reason_code; + u8 phy_number; + struct _sas_node *sas_expander; + unsigned long flags; + u8 link_rate_; + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) + _scsih_sas_topology_change_event_debug(ioc, event_data); +#endif + + if (!ioc->sas_hba.num_phys) + _scsih_sas_host_add(ioc); + else + _scsih_sas_host_refresh(ioc, 0); + + if (fw_event->ignore) { + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ignoring expander " + "event\n", ioc->name)); + return; + } + + parent_handle = le16_to_cpu(event_data->ExpanderDevHandle); + + /* handle expander add */ + if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_ADDED) + if (_scsih_expander_add(ioc, parent_handle) != 0) + return; + + /* handle siblings events */ + for (i = 0; i < event_data->NumEntries; i++) { + if (fw_event->ignore) { + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ignoring " + "expander event\n", ioc->name)); + return; + } + if (event_data->PHY[i].PhyStatus & + MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT) + continue; + handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); + if (!handle) + continue; + phy_number = event_data->StartPhyNum + i; + reason_code = event_data->PHY[i].PhyStatus & + MPI2_EVENT_SAS_TOPO_RC_MASK; + link_rate_ = event_data->PHY[i].LinkRate >> 4; + switch (reason_code) { + case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED: + case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED: + if (!parent_handle) { + if (phy_number < ioc->sas_hba.num_phys) + _scsih_link_change(ioc, + ioc->sas_hba.phy[phy_number].handle, + handle, phy_number, link_rate_); + } else { + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_expander = + mpt2sas_scsih_expander_find_by_handle(ioc, + parent_handle); + spin_unlock_irqrestore(&ioc->sas_node_lock, + flags); + if (sas_expander) { + if (phy_number < sas_expander->num_phys) + _scsih_link_change(ioc, + sas_expander-> + phy[phy_number].handle, + handle, phy_number, + link_rate_); + } + } + if (reason_code == MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED) { + if (link_rate_ >= MPI2_SAS_NEG_LINK_RATE_1_5) + _scsih_ublock_io_device(ioc, handle); + } + if (reason_code == MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED) { + if (link_rate_ < MPI2_SAS_NEG_LINK_RATE_1_5) + break; + _scsih_add_device(ioc, handle, phy_number, 0); + } + break; + case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING: + _scsih_remove_device(ioc, handle); + break; + } + } + + /* handle expander removal */ + if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING) + _scsih_expander_remove(ioc, parent_handle); + +} + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _scsih_sas_device_status_change_event_debug - debug for device event + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_device_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventDataSasDeviceStatusChange_t *event_data) +{ + char *reason_str = NULL; + + switch (event_data->ReasonCode) { + case MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA: + reason_str = "smart data"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED: + reason_str = "unsupported device discovered"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET: + reason_str = "internal device reset"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL: + reason_str = "internal task abort"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL: + reason_str = "internal task abort set"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL: + reason_str = "internal clear task set"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL: + reason_str = "internal query task"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE: + reason_str = "sata init failure"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET: + reason_str = "internal device reset complete"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL: + reason_str = "internal task abort complete"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION: + reason_str = "internal async notification"; + break; + default: + reason_str = "unknown reason"; + break; + } + printk(MPT2SAS_DEBUG_FMT "device status change: (%s)\n" + "\thandle(0x%04x), sas address(0x%016llx)", ioc->name, + reason_str, le16_to_cpu(event_data->DevHandle), + (unsigned long long)le64_to_cpu(event_data->SASAddress)); + if (event_data->ReasonCode == MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA) + printk(MPT2SAS_DEBUG_FMT ", ASC(0x%x), ASCQ(0x%x)\n", ioc->name, + event_data->ASC, event_data->ASCQ); + printk(KERN_INFO "\n"); +} +#endif + +/** + * _scsih_sas_device_status_change_event - handle device status change + * @ioc: per adapter object + * @VF_ID: + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataSasDeviceStatusChange_t *event_data) +{ +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) + _scsih_sas_device_status_change_event_debug(ioc, event_data); +#endif +} + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _scsih_sas_enclosure_dev_status_change_event_debug - debug for enclosure event + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_enclosure_dev_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventDataSasEnclDevStatusChange_t *event_data) +{ + char *reason_str = NULL; + + switch (event_data->ReasonCode) { + case MPI2_EVENT_SAS_ENCL_RC_ADDED: + reason_str = "enclosure add"; + break; + case MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING: + reason_str = "enclosure remove"; + break; + default: + reason_str = "unknown reason"; + break; + } + + printk(MPT2SAS_DEBUG_FMT "enclosure status change: (%s)\n" + "\thandle(0x%04x), enclosure logical id(0x%016llx)" + " number slots(%d)\n", ioc->name, reason_str, + le16_to_cpu(event_data->EnclosureHandle), + (unsigned long long)le64_to_cpu(event_data->EnclosureLogicalID), + le16_to_cpu(event_data->StartSlot)); +} +#endif + +/** + * _scsih_sas_enclosure_dev_status_change_event - handle enclosure events + * @ioc: per adapter object + * @VF_ID: + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_enclosure_dev_status_change_event(struct MPT2SAS_ADAPTER *ioc, + u8 VF_ID, Mpi2EventDataSasEnclDevStatusChange_t *event_data) +{ +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) + _scsih_sas_enclosure_dev_status_change_event_debug(ioc, + event_data); +#endif +} + +/** + * _scsih_sas_broadcast_primative_event - handle broadcast events + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataSasBroadcastPrimitive_t *event_data) +{ + struct scsi_cmnd *scmd; + u16 smid, handle; + u32 lun; + struct MPT2SAS_DEVICE *sas_device_priv_data; + u32 termination_count; + u32 query_count; + Mpi2SCSITaskManagementReply_t *mpi_reply; + + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "broadcast primative: " + "phy number(%d), width(%d)\n", ioc->name, event_data->PhyNum, + event_data->PortWidth)); + + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name, + __func__)); + + mutex_lock(&ioc->tm_cmds.mutex); + termination_count = 0; + query_count = 0; + mpi_reply = ioc->tm_cmds.reply; + for (smid = 1; smid <= ioc->request_depth; smid++) { + scmd = _scsih_scsi_lookup_get(ioc, smid); + if (!scmd) + continue; + sas_device_priv_data = scmd->device->hostdata; + if (!sas_device_priv_data || !sas_device_priv_data->sas_target) + continue; + /* skip hidden raid components */ + if (sas_device_priv_data->sas_target->flags & + MPT_TARGET_FLAGS_RAID_COMPONENT) + continue; + /* skip volumes */ + if (sas_device_priv_data->sas_target->flags & + MPT_TARGET_FLAGS_VOLUME) + continue; + + handle = sas_device_priv_data->sas_target->handle; + lun = sas_device_priv_data->lun; + query_count++; + + mpt2sas_scsih_issue_tm(ioc, handle, lun, + MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30); + termination_count += le32_to_cpu(mpi_reply->TerminationCount); + + if ((mpi_reply->IOCStatus == MPI2_IOCSTATUS_SUCCESS) && + (mpi_reply->ResponseCode == + MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED || + mpi_reply->ResponseCode == + MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC)) + continue; + + mpt2sas_scsih_issue_tm(ioc, handle, lun, + MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, smid, 30); + termination_count += le32_to_cpu(mpi_reply->TerminationCount); + } + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; + ioc->broadcast_aen_busy = 0; + mutex_unlock(&ioc->tm_cmds.mutex); + + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "%s - exit, query_count = %d termination_count = %d\n", + ioc->name, __func__, query_count, termination_count)); +} + +/** + * _scsih_sas_discovery_event - handle discovery events + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_discovery_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataSasDiscovery_t *event_data) +{ +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) { + printk(MPT2SAS_DEBUG_FMT "discovery event: (%s)", ioc->name, + (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ? + "start" : "stop"); + if (event_data->DiscoveryStatus) + printk(MPT2SAS_DEBUG_FMT ", discovery_status(0x%08x)", + ioc->name, le32_to_cpu(event_data->DiscoveryStatus)); + printk("\n"); + } +#endif + + if (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED && + !ioc->sas_hba.num_phys) + _scsih_sas_host_add(ioc); +} + +/** + * _scsih_reprobe_lun - reprobing lun + * @sdev: scsi device struct + * @no_uld_attach: sdev->no_uld_attach flag setting + * + **/ +static void +_scsih_reprobe_lun(struct scsi_device *sdev, void *no_uld_attach) +{ + int rc; + + sdev->no_uld_attach = no_uld_attach ? 1 : 0; + sdev_printk(KERN_INFO, sdev, "%s raid component\n", + sdev->no_uld_attach ? "hidding" : "exposing"); + rc = scsi_device_reprobe(sdev); +} + +/** + * _scsih_reprobe_target - reprobing target + * @starget: scsi target struct + * @no_uld_attach: sdev->no_uld_attach flag setting + * + * Note: no_uld_attach flag determines whether the disk device is attached + * to block layer. A value of `1` means to not attach. + **/ +static void +_scsih_reprobe_target(struct scsi_target *starget, int no_uld_attach) +{ + struct MPT2SAS_TARGET *sas_target_priv_data = starget->hostdata; + + if (no_uld_attach) + sas_target_priv_data->flags |= MPT_TARGET_FLAGS_RAID_COMPONENT; + else + sas_target_priv_data->flags &= ~MPT_TARGET_FLAGS_RAID_COMPONENT; + + starget_for_each_device(starget, no_uld_attach ? (void *)1 : NULL, + _scsih_reprobe_lun); +} +/** + * _scsih_sas_volume_add - add new volume + * @ioc: per adapter object + * @element: IR config element data + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_volume_add(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventIrConfigElement_t *element) +{ + struct _raid_device *raid_device; + unsigned long flags; + u64 wwid; + u16 handle = le16_to_cpu(element->VolDevHandle); + int rc; + +#if 0 /* RAID_HACKS */ + if (le32_to_cpu(event_data->Flags) & + MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) + return; +#endif + + mpt2sas_config_get_volume_wwid(ioc, handle, &wwid); + if (!wwid) { + printk(MPT2SAS_ERR_FMT + "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__); + return; + } + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_wwid(ioc, wwid); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + + if (raid_device) + return; + + raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL); + if (!raid_device) { + printk(MPT2SAS_ERR_FMT + "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__); + return; + } + + raid_device->id = ioc->sas_id++; + raid_device->channel = RAID_CHANNEL; + raid_device->handle = handle; + raid_device->wwid = wwid; + _scsih_raid_device_add(ioc, raid_device); + if (!ioc->wait_for_port_enable_to_complete) { + rc = scsi_add_device(ioc->shost, RAID_CHANNEL, + raid_device->id, 0); + if (rc) + _scsih_raid_device_remove(ioc, raid_device); + } else + _scsih_determine_boot_device(ioc, raid_device, 1); +} + +/** + * _scsih_sas_volume_delete - delete volume + * @ioc: per adapter object + * @element: IR config element data + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_volume_delete(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventIrConfigElement_t *element) +{ + struct _raid_device *raid_device; + u16 handle = le16_to_cpu(element->VolDevHandle); + unsigned long flags; + struct MPT2SAS_TARGET *sas_target_priv_data; + +#if 0 /* RAID_HACKS */ + if (le32_to_cpu(event_data->Flags) & + MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) + return; +#endif + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + if (!raid_device) + return; + if (raid_device->starget) { + sas_target_priv_data = raid_device->starget->hostdata; + sas_target_priv_data->deleted = 1; + scsi_remove_target(&raid_device->starget->dev); + } + _scsih_raid_device_remove(ioc, raid_device); +} + +/** + * _scsih_sas_pd_expose - expose pd component to /dev/sdX + * @ioc: per adapter object + * @element: IR config element data + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_pd_expose(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventIrConfigElement_t *element) +{ + struct _sas_device *sas_device; + unsigned long flags; + u16 handle = le16_to_cpu(element->PhysDiskDevHandle); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (!sas_device) + return; + + /* exposing raid component */ + sas_device->volume_handle = 0; + sas_device->volume_wwid = 0; + sas_device->hidden_raid_component = 0; + _scsih_reprobe_target(sas_device->starget, 0); +} + +/** + * _scsih_sas_pd_hide - hide pd component from /dev/sdX + * @ioc: per adapter object + * @element: IR config element data + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_pd_hide(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventIrConfigElement_t *element) +{ + struct _sas_device *sas_device; + unsigned long flags; + u16 handle = le16_to_cpu(element->PhysDiskDevHandle); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (!sas_device) + return; + + /* hiding raid component */ + mpt2sas_config_get_volume_handle(ioc, handle, + &sas_device->volume_handle); + mpt2sas_config_get_volume_wwid(ioc, sas_device->volume_handle, + &sas_device->volume_wwid); + sas_device->hidden_raid_component = 1; + _scsih_reprobe_target(sas_device->starget, 1); +} + +/** + * _scsih_sas_pd_delete - delete pd component + * @ioc: per adapter object + * @element: IR config element data + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_pd_delete(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventIrConfigElement_t *element) +{ + struct _sas_device *sas_device; + unsigned long flags; + u16 handle = le16_to_cpu(element->PhysDiskDevHandle); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (!sas_device) + return; + _scsih_remove_device(ioc, handle); +} + +/** + * _scsih_sas_pd_add - remove pd component + * @ioc: per adapter object + * @element: IR config element data + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_pd_add(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventIrConfigElement_t *element) +{ + struct _sas_device *sas_device; + unsigned long flags; + u16 handle = le16_to_cpu(element->PhysDiskDevHandle); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (sas_device) + sas_device->hidden_raid_component = 1; + else + _scsih_add_device(ioc, handle, 0, 1); +} + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _scsih_sas_ir_config_change_event_debug - debug for IR Config Change events + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_config_change_event_debug(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventDataIrConfigChangeList_t *event_data) +{ + Mpi2EventIrConfigElement_t *element; + u8 element_type; + int i; + char *reason_str = NULL, *element_str = NULL; + + element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; + + printk(MPT2SAS_DEBUG_FMT "raid config change: (%s), elements(%d)\n", + ioc->name, (le32_to_cpu(event_data->Flags) & + MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? + "foreign" : "native", event_data->NumElements); + for (i = 0; i < event_data->NumElements; i++, element++) { + switch (element->ReasonCode) { + case MPI2_EVENT_IR_CHANGE_RC_ADDED: + reason_str = "add"; + break; + case MPI2_EVENT_IR_CHANGE_RC_REMOVED: + reason_str = "remove"; + break; + case MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE: + reason_str = "no change"; + break; + case MPI2_EVENT_IR_CHANGE_RC_HIDE: + reason_str = "hide"; + break; + case MPI2_EVENT_IR_CHANGE_RC_UNHIDE: + reason_str = "unhide"; + break; + case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED: + reason_str = "volume_created"; + break; + case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED: + reason_str = "volume_deleted"; + break; + case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED: + reason_str = "pd_created"; + break; + case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED: + reason_str = "pd_deleted"; + break; + default: + reason_str = "unknown reason"; + break; + } + element_type = le16_to_cpu(element->ElementFlags) & + MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK; + switch (element_type) { + case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT: + element_str = "volume"; + break; + case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT: + element_str = "phys disk"; + break; + case MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT: + element_str = "hot spare"; + break; + default: + element_str = "unknown element"; + break; + } + printk(KERN_DEBUG "\t(%s:%s), vol handle(0x%04x), " + "pd handle(0x%04x), pd num(0x%02x)\n", element_str, + reason_str, le16_to_cpu(element->VolDevHandle), + le16_to_cpu(element->PhysDiskDevHandle), + element->PhysDiskNum); + } +} +#endif + +/** + * _scsih_sas_ir_config_change_event - handle ir configuration change events + * @ioc: per adapter object + * @VF_ID: + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataIrConfigChangeList_t *event_data) +{ + Mpi2EventIrConfigElement_t *element; + int i; + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) + _scsih_sas_ir_config_change_event_debug(ioc, event_data); + +#endif + + element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; + for (i = 0; i < event_data->NumElements; i++, element++) { + + switch (element->ReasonCode) { + case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED: + case MPI2_EVENT_IR_CHANGE_RC_ADDED: + _scsih_sas_volume_add(ioc, element); + break; + case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED: + case MPI2_EVENT_IR_CHANGE_RC_REMOVED: + _scsih_sas_volume_delete(ioc, element); + break; + case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED: + _scsih_sas_pd_hide(ioc, element); + break; + case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED: + _scsih_sas_pd_expose(ioc, element); + break; + case MPI2_EVENT_IR_CHANGE_RC_HIDE: + _scsih_sas_pd_add(ioc, element); + break; + case MPI2_EVENT_IR_CHANGE_RC_UNHIDE: + _scsih_sas_pd_delete(ioc, element); + break; + } + } +} + +/** + * _scsih_sas_ir_volume_event - IR volume event + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataIrVolume_t *event_data) +{ + u64 wwid; + unsigned long flags; + struct _raid_device *raid_device; + u16 handle; + u32 state; + int rc; + struct MPT2SAS_TARGET *sas_target_priv_data; + + if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED) + return; + + handle = le16_to_cpu(event_data->VolDevHandle); + state = le32_to_cpu(event_data->NewValue); + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle(0x%04x), " + "old(0x%08x), new(0x%08x)\n", ioc->name, __func__, handle, + le32_to_cpu(event_data->PreviousValue), state)); + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + + switch (state) { + case MPI2_RAID_VOL_STATE_MISSING: + case MPI2_RAID_VOL_STATE_FAILED: + if (!raid_device) + break; + if (raid_device->starget) { + sas_target_priv_data = raid_device->starget->hostdata; + sas_target_priv_data->deleted = 1; + scsi_remove_target(&raid_device->starget->dev); + } + _scsih_raid_device_remove(ioc, raid_device); + break; + + case MPI2_RAID_VOL_STATE_ONLINE: + case MPI2_RAID_VOL_STATE_DEGRADED: + case MPI2_RAID_VOL_STATE_OPTIMAL: + if (raid_device) + break; + + mpt2sas_config_get_volume_wwid(ioc, handle, &wwid); + if (!wwid) { + printk(MPT2SAS_ERR_FMT + "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__); + break; + } + + raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL); + if (!raid_device) { + printk(MPT2SAS_ERR_FMT + "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__); + break; + } + + raid_device->id = ioc->sas_id++; + raid_device->channel = RAID_CHANNEL; + raid_device->handle = handle; + raid_device->wwid = wwid; + _scsih_raid_device_add(ioc, raid_device); + rc = scsi_add_device(ioc->shost, RAID_CHANNEL, + raid_device->id, 0); + if (rc) + _scsih_raid_device_remove(ioc, raid_device); + break; + + case MPI2_RAID_VOL_STATE_INITIALIZING: + default: + break; + } +} + +/** + * _scsih_sas_ir_physical_disk_event - PD event + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataIrPhysicalDisk_t *event_data) +{ + u16 handle; + u32 state; + struct _sas_device *sas_device; + unsigned long flags; + + if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED) + return; + + handle = le16_to_cpu(event_data->PhysDiskDevHandle); + state = le32_to_cpu(event_data->NewValue); + + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle(0x%04x), " + "old(0x%08x), new(0x%08x)\n", ioc->name, __func__, handle, + le32_to_cpu(event_data->PreviousValue), state)); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + switch (state) { +#if 0 + case MPI2_RAID_PD_STATE_OFFLINE: + if (sas_device) + _scsih_remove_device(ioc, handle); + break; +#endif + case MPI2_RAID_PD_STATE_ONLINE: + case MPI2_RAID_PD_STATE_DEGRADED: + case MPI2_RAID_PD_STATE_REBUILDING: + case MPI2_RAID_PD_STATE_OPTIMAL: + if (sas_device) + sas_device->hidden_raid_component = 1; + else + _scsih_add_device(ioc, handle, 0, 1); + break; + + case MPI2_RAID_PD_STATE_NOT_CONFIGURED: + case MPI2_RAID_PD_STATE_NOT_COMPATIBLE: + case MPI2_RAID_PD_STATE_HOT_SPARE: + default: + break; + } +} + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _scsih_sas_ir_operation_status_event_debug - debug for IR op event + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_operation_status_event_debug(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventDataIrOperationStatus_t *event_data) +{ + char *reason_str = NULL; + + switch (event_data->RAIDOperation) { + case MPI2_EVENT_IR_RAIDOP_RESYNC: + reason_str = "resync"; + break; + case MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION: + reason_str = "online capacity expansion"; + break; + case MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK: + reason_str = "consistency check"; + break; + default: + reason_str = "unknown reason"; + break; + } + + printk(MPT2SAS_INFO_FMT "raid operational status: (%s)" + "\thandle(0x%04x), percent complete(%d)\n", + ioc->name, reason_str, + le16_to_cpu(event_data->VolDevHandle), + event_data->PercentComplete); +} +#endif + +/** + * _scsih_sas_ir_operation_status_event - handle RAID operation events + * @ioc: per adapter object + * @VF_ID: + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_operation_status_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataIrOperationStatus_t *event_data) +{ +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) + _scsih_sas_ir_operation_status_event_debug(ioc, event_data); +#endif +} + +/** + * _scsih_task_set_full - handle task set full + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Throttle back qdepth. + */ +static void +_scsih_task_set_full(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataTaskSetFull_t *event_data) +{ + unsigned long flags; + struct _sas_device *sas_device; + static struct _raid_device *raid_device; + struct scsi_device *sdev; + int depth; + u16 current_depth; + u16 handle; + int id, channel; + u64 sas_address; + + current_depth = le16_to_cpu(event_data->CurrentDepth); + handle = le16_to_cpu(event_data->DevHandle); + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + if (!sas_device) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return; + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + id = sas_device->id; + channel = sas_device->channel; + sas_address = sas_device->sas_address; + + /* if hidden raid component, then change to volume characteristics */ + if (sas_device->hidden_raid_component && sas_device->volume_handle) { + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_handle( + ioc, sas_device->volume_handle); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + if (raid_device) { + id = raid_device->id; + channel = raid_device->channel; + handle = raid_device->handle; + sas_address = raid_device->wwid; + } + } + + if (ioc->logging_level & MPT_DEBUG_TASK_SET_FULL) + starget_printk(KERN_DEBUG, sas_device->starget, "task set " + "full: handle(0x%04x), sas_addr(0x%016llx), depth(%d)\n", + handle, (unsigned long long)sas_address, current_depth); + + shost_for_each_device(sdev, ioc->shost) { + if (sdev->id == id && sdev->channel == channel) { + if (current_depth > sdev->queue_depth) { + if (ioc->logging_level & + MPT_DEBUG_TASK_SET_FULL) + sdev_printk(KERN_INFO, sdev, "strange " + "observation, the queue depth is" + " (%d) meanwhile fw queue depth " + "is (%d)\n", sdev->queue_depth, + current_depth); + continue; + } + depth = scsi_track_queue_full(sdev, + current_depth - 1); + if (depth > 0) + sdev_printk(KERN_INFO, sdev, "Queue depth " + "reduced to (%d)\n", depth); + else if (depth < 0) + sdev_printk(KERN_INFO, sdev, "Tagged Command " + "Queueing is being disabled\n"); + else if (depth == 0) + if (ioc->logging_level & + MPT_DEBUG_TASK_SET_FULL) + sdev_printk(KERN_INFO, sdev, + "Queue depth not changed yet\n"); + } + } +} + +/** + * _scsih_mark_responding_sas_device - mark a sas_devices as responding + * @ioc: per adapter object + * @sas_address: sas address + * @slot: enclosure slot id + * @handle: device handle + * + * After host reset, find out whether devices are still responding. + * Used in _scsi_remove_unresponsive_sas_devices. + * + * Return nothing. + */ +static void +_scsih_mark_responding_sas_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, + u16 slot, u16 handle) +{ + struct MPT2SAS_TARGET *sas_target_priv_data; + struct scsi_target *starget; + struct _sas_device *sas_device; + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_for_each_entry(sas_device, &ioc->sas_device_list, list) { + if (sas_device->sas_address == sas_address && + sas_device->slot == slot && sas_device->starget) { + sas_device->responding = 1; + starget_printk(KERN_INFO, sas_device->starget, + "handle(0x%04x), sas_addr(0x%016llx), enclosure " + "logical id(0x%016llx), slot(%d)\n", handle, + (unsigned long long)sas_device->sas_address, + (unsigned long long) + sas_device->enclosure_logical_id, + sas_device->slot); + if (sas_device->handle == handle) + goto out; + printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n", + sas_device->handle); + sas_device->handle = handle; + starget = sas_device->starget; + sas_target_priv_data = starget->hostdata; + sas_target_priv_data->handle = handle; + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); +} + +/** + * _scsih_search_responding_sas_devices - + * @ioc: per adapter object + * + * After host reset, find out whether devices are still responding. + * If not remove. + * + * Return nothing. + */ +static void +_scsih_search_responding_sas_devices(struct MPT2SAS_ADAPTER *ioc) +{ + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2ConfigReply_t mpi_reply; + u16 ioc_status; + __le64 sas_address; + u16 handle; + u32 device_info; + u16 slot; + + printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__); + + if (list_empty(&ioc->sas_device_list)) + return; + + handle = 0xFFFF; + while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, + &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE, + handle))) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + break; + handle = le16_to_cpu(sas_device_pg0.DevHandle); + device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); + if (!(_scsih_is_end_device(device_info))) + continue; + sas_address = le64_to_cpu(sas_device_pg0.SASAddress); + slot = le16_to_cpu(sas_device_pg0.Slot); + _scsih_mark_responding_sas_device(ioc, sas_address, slot, + handle); + } +} + +/** + * _scsih_mark_responding_raid_device - mark a raid_device as responding + * @ioc: per adapter object + * @wwid: world wide identifier for raid volume + * @handle: device handle + * + * After host reset, find out whether devices are still responding. + * Used in _scsi_remove_unresponsive_raid_devices. + * + * Return nothing. + */ +static void +_scsih_mark_responding_raid_device(struct MPT2SAS_ADAPTER *ioc, u64 wwid, + u16 handle) +{ + struct MPT2SAS_TARGET *sas_target_priv_data; + struct scsi_target *starget; + struct _raid_device *raid_device; + unsigned long flags; + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + list_for_each_entry(raid_device, &ioc->raid_device_list, list) { + if (raid_device->wwid == wwid && raid_device->starget) { + raid_device->responding = 1; + starget_printk(KERN_INFO, raid_device->starget, + "handle(0x%04x), wwid(0x%016llx)\n", handle, + (unsigned long long)raid_device->wwid); + if (raid_device->handle == handle) + goto out; + printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n", + raid_device->handle); + raid_device->handle = handle; + starget = raid_device->starget; + sas_target_priv_data = starget->hostdata; + sas_target_priv_data->handle = handle; + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); +} + +/** + * _scsih_search_responding_raid_devices - + * @ioc: per adapter object + * + * After host reset, find out whether devices are still responding. + * If not remove. + * + * Return nothing. + */ +static void +_scsih_search_responding_raid_devices(struct MPT2SAS_ADAPTER *ioc) +{ + Mpi2RaidVolPage1_t volume_pg1; + Mpi2ConfigReply_t mpi_reply; + u16 ioc_status; + u16 handle; + + printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__); + + if (list_empty(&ioc->raid_device_list)) + return; + + handle = 0xFFFF; + while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply, + &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + break; + handle = le16_to_cpu(volume_pg1.DevHandle); + _scsih_mark_responding_raid_device(ioc, + le64_to_cpu(volume_pg1.WWID), handle); + } +} + +/** + * _scsih_mark_responding_expander - mark a expander as responding + * @ioc: per adapter object + * @sas_address: sas address + * @handle: + * + * After host reset, find out whether devices are still responding. + * Used in _scsi_remove_unresponsive_expanders. + * + * Return nothing. + */ +static void +_scsih_mark_responding_expander(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, + u16 handle) +{ + struct _sas_node *sas_expander; + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) { + if (sas_expander->sas_address == sas_address) { + sas_expander->responding = 1; + if (sas_expander->handle != handle) { + printk(KERN_INFO "old handle(0x%04x)\n", + sas_expander->handle); + sas_expander->handle = handle; + } + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); +} + +/** + * _scsih_search_responding_expanders - + * @ioc: per adapter object + * + * After host reset, find out whether devices are still responding. + * If not remove. + * + * Return nothing. + */ +static void +_scsih_search_responding_expanders(struct MPT2SAS_ADAPTER *ioc) +{ + Mpi2ExpanderPage0_t expander_pg0; + Mpi2ConfigReply_t mpi_reply; + u16 ioc_status; + __le64 sas_address; + u16 handle; + + printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__); + + if (list_empty(&ioc->sas_expander_list)) + return; + + handle = 0xFFFF; + while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0, + MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) { + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + break; + + handle = le16_to_cpu(expander_pg0.DevHandle); + sas_address = le64_to_cpu(expander_pg0.SASAddress); + printk(KERN_INFO "\texpander present: handle(0x%04x), " + "sas_addr(0x%016llx)\n", handle, + (unsigned long long)sas_address); + _scsih_mark_responding_expander(ioc, sas_address, handle); + } + +} + +/** + * _scsih_remove_unresponding_devices - removing unresponding devices + * @ioc: per adapter object + * + * Return nothing. + */ +static void +_scsih_remove_unresponding_devices(struct MPT2SAS_ADAPTER *ioc) +{ + struct _sas_device *sas_device, *sas_device_next; + struct _sas_node *sas_expander, *sas_expander_next; + struct _raid_device *raid_device, *raid_device_next; + unsigned long flags; + + _scsih_search_responding_sas_devices(ioc); + _scsih_search_responding_raid_devices(ioc); + _scsih_search_responding_expanders(ioc); + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + ioc->shost_recovery = 0; + if (ioc->shost->shost_state == SHOST_RECOVERY) { + printk(MPT2SAS_INFO_FMT "putting controller into " + "SHOST_RUNNING\n", ioc->name); + scsi_host_set_state(ioc->shost, SHOST_RUNNING); + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + list_for_each_entry_safe(sas_device, sas_device_next, + &ioc->sas_device_list, list) { + if (sas_device->responding) { + sas_device->responding = 0; + continue; + } + if (sas_device->starget) + starget_printk(KERN_INFO, sas_device->starget, + "removing: handle(0x%04x), sas_addr(0x%016llx), " + "enclosure logical id(0x%016llx), slot(%d)\n", + sas_device->handle, + (unsigned long long)sas_device->sas_address, + (unsigned long long) + sas_device->enclosure_logical_id, + sas_device->slot); + _scsih_remove_device(ioc, sas_device->handle); + } + + list_for_each_entry_safe(raid_device, raid_device_next, + &ioc->raid_device_list, list) { + if (raid_device->responding) { + raid_device->responding = 0; + continue; + } + if (raid_device->starget) { + starget_printk(KERN_INFO, raid_device->starget, + "removing: handle(0x%04x), wwid(0x%016llx)\n", + raid_device->handle, + (unsigned long long)raid_device->wwid); + scsi_remove_target(&raid_device->starget->dev); + } + _scsih_raid_device_remove(ioc, raid_device); + } + + list_for_each_entry_safe(sas_expander, sas_expander_next, + &ioc->sas_expander_list, list) { + if (sas_expander->responding) { + sas_expander->responding = 0; + continue; + } + printk("\tremoving expander: handle(0x%04x), " + " sas_addr(0x%016llx)\n", sas_expander->handle, + (unsigned long long)sas_expander->sas_address); + _scsih_expander_remove(ioc, sas_expander->handle); + } +} + +/** + * _firmware_event_work - delayed task for processing firmware events + * @ioc: per adapter object + * @work: equal to the fw_event_work object + * Context: user. + * + * Return nothing. + */ +static void +_firmware_event_work(struct work_struct *work) +{ + struct fw_event_work *fw_event = container_of(work, + struct fw_event_work, work.work); + unsigned long flags; + struct MPT2SAS_ADAPTER *ioc = fw_event->ioc; + + /* This is invoked by calling _scsih_queue_rescan(). */ + if (fw_event->event == MPT2SAS_RESCAN_AFTER_HOST_RESET) { + _scsih_fw_event_free(ioc, fw_event); + _scsih_sas_host_refresh(ioc, 1); + _scsih_remove_unresponding_devices(ioc); + return; + } + + /* the queue is being flushed so ignore this event */ + spin_lock_irqsave(&ioc->fw_event_lock, flags); + if (ioc->fw_events_off || ioc->remove_host) { + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + _scsih_fw_event_free(ioc, fw_event); + return; + } + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->shost_recovery) { + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + _scsih_fw_event_requeue(ioc, fw_event, 1000); + return; + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + switch (fw_event->event) { + case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: + _scsih_sas_topology_change_event(ioc, fw_event->VF_ID, + fw_event->event_data, fw_event); + break; + case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: + _scsih_sas_device_status_change_event(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + case MPI2_EVENT_SAS_DISCOVERY: + _scsih_sas_discovery_event(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: + _scsih_sas_broadcast_primative_event(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE: + _scsih_sas_enclosure_dev_status_change_event(ioc, + fw_event->VF_ID, fw_event->event_data); + break; + case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: + _scsih_sas_ir_config_change_event(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + case MPI2_EVENT_IR_VOLUME: + _scsih_sas_ir_volume_event(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + case MPI2_EVENT_IR_PHYSICAL_DISK: + _scsih_sas_ir_physical_disk_event(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + case MPI2_EVENT_IR_OPERATION_STATUS: + _scsih_sas_ir_operation_status_event(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + case MPI2_EVENT_TASK_SET_FULL: + _scsih_task_set_full(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + } + _scsih_fw_event_free(ioc, fw_event); +} + +/** + * mpt2sas_scsih_event_callback - firmware event handler (called at ISR time) + * @ioc: per adapter object + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * Context: interrupt. + * + * This function merely adds a new work task into ioc->firmware_event_thread. + * The tasks are worked from _firmware_event_work in user context. + * + * Return nothing. + */ +void +mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply) +{ + struct fw_event_work *fw_event; + Mpi2EventNotificationReply_t *mpi_reply; + unsigned long flags; + u16 event; + + /* events turned off due to host reset or driver unloading */ + spin_lock_irqsave(&ioc->fw_event_lock, flags); + if (ioc->fw_events_off || ioc->remove_host) { + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + return; + } + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + event = le16_to_cpu(mpi_reply->Event); + + switch (event) { + /* handle these */ + case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: + { + Mpi2EventDataSasBroadcastPrimitive_t *baen_data = + (Mpi2EventDataSasBroadcastPrimitive_t *) + mpi_reply->EventData; + + if (baen_data->Primitive != + MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT || + ioc->broadcast_aen_busy) + return; + ioc->broadcast_aen_busy = 1; + break; + } + + case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: + _scsih_check_topo_delete_events(ioc, + (Mpi2EventDataSasTopologyChangeList_t *) + mpi_reply->EventData); + break; + + case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: + case MPI2_EVENT_IR_OPERATION_STATUS: + case MPI2_EVENT_SAS_DISCOVERY: + case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE: + case MPI2_EVENT_IR_VOLUME: + case MPI2_EVENT_IR_PHYSICAL_DISK: + case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: + case MPI2_EVENT_TASK_SET_FULL: + break; + + default: /* ignore the rest */ + return; + } + + fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); + if (!fw_event) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + fw_event->event_data = + kzalloc(mpi_reply->EventDataLength*4, GFP_ATOMIC); + if (!fw_event->event_data) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + kfree(fw_event); + return; + } + + memcpy(fw_event->event_data, mpi_reply->EventData, + mpi_reply->EventDataLength*4); + fw_event->ioc = ioc; + fw_event->VF_ID = VF_ID; + fw_event->event = event; + _scsih_fw_event_add(ioc, fw_event); +} + +/* shost template */ +static struct scsi_host_template scsih_driver_template = { + .module = THIS_MODULE, + .name = "Fusion MPT SAS Host", + .proc_name = MPT2SAS_DRIVER_NAME, + .queuecommand = scsih_qcmd, + .target_alloc = scsih_target_alloc, + .slave_alloc = scsih_slave_alloc, + .slave_configure = scsih_slave_configure, + .target_destroy = scsih_target_destroy, + .slave_destroy = scsih_slave_destroy, + .change_queue_depth = scsih_change_queue_depth, + .change_queue_type = scsih_change_queue_type, + .eh_abort_handler = scsih_abort, + .eh_device_reset_handler = scsih_dev_reset, + .eh_host_reset_handler = scsih_host_reset, + .bios_param = scsih_bios_param, + .can_queue = 1, + .this_id = -1, + .sg_tablesize = MPT2SAS_SG_DEPTH, + .max_sectors = 8192, + .cmd_per_lun = 7, + .use_clustering = ENABLE_CLUSTERING, + .shost_attrs = mpt2sas_host_attrs, + .sdev_attrs = mpt2sas_dev_attrs, +}; + +/** + * _scsih_expander_node_remove - removing expander device from list. + * @ioc: per adapter object + * @sas_expander: the sas_device object + * Context: Calling function should acquire ioc->sas_node_lock. + * + * Removing object and freeing associated memory from the + * ioc->sas_expander_list. + * + * Return nothing. + */ +static void +_scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc, + struct _sas_node *sas_expander) +{ + struct _sas_port *mpt2sas_port; + struct _sas_device *sas_device; + struct _sas_node *expander_sibling; + unsigned long flags; + + if (!sas_expander) + return; + + /* remove sibling ports attached to this expander */ + retry_device_search: + list_for_each_entry(mpt2sas_port, + &sas_expander->sas_port_list, port_list) { + if (mpt2sas_port->remote_identify.device_type == + SAS_END_DEVICE) { + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = + mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + mpt2sas_port->remote_identify.sas_address); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (!sas_device) + continue; + _scsih_remove_device(ioc, sas_device->handle); + goto retry_device_search; + } + } + + retry_expander_search: + list_for_each_entry(mpt2sas_port, + &sas_expander->sas_port_list, port_list) { + + if (mpt2sas_port->remote_identify.device_type == + MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER || + mpt2sas_port->remote_identify.device_type == + MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER) { + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + expander_sibling = + mpt2sas_scsih_expander_find_by_sas_address( + ioc, mpt2sas_port->remote_identify.sas_address); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + if (!expander_sibling) + continue; + _scsih_expander_remove(ioc, expander_sibling->handle); + goto retry_expander_search; + } + } + + mpt2sas_transport_port_remove(ioc, sas_expander->sas_address, + sas_expander->parent_handle); + + printk(MPT2SAS_INFO_FMT "expander_remove: handle" + "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, + sas_expander->handle, (unsigned long long) + sas_expander->sas_address); + + list_del(&sas_expander->list); + kfree(sas_expander->phy); + kfree(sas_expander); +} + +/** + * scsih_remove - detach and remove add host + * @pdev: PCI device struct + * + * Return nothing. + */ +static void __devexit +scsih_remove(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + struct _sas_port *mpt2sas_port; + struct _sas_device *sas_device; + struct _sas_node *expander_sibling; + struct workqueue_struct *wq; + unsigned long flags; + + ioc->remove_host = 1; + _scsih_fw_event_off(ioc); + + spin_lock_irqsave(&ioc->fw_event_lock, flags); + wq = ioc->firmware_event_thread; + ioc->firmware_event_thread = NULL; + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + if (wq) + destroy_workqueue(wq); + + /* free ports attached to the sas_host */ + retry_again: + list_for_each_entry(mpt2sas_port, + &ioc->sas_hba.sas_port_list, port_list) { + if (mpt2sas_port->remote_identify.device_type == + SAS_END_DEVICE) { + sas_device = + mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + mpt2sas_port->remote_identify.sas_address); + if (sas_device) { + _scsih_remove_device(ioc, sas_device->handle); + goto retry_again; + } + } else { + expander_sibling = + mpt2sas_scsih_expander_find_by_sas_address(ioc, + mpt2sas_port->remote_identify.sas_address); + if (expander_sibling) { + _scsih_expander_remove(ioc, + expander_sibling->handle); + goto retry_again; + } + } + } + + /* free phys attached to the sas_host */ + if (ioc->sas_hba.num_phys) { + kfree(ioc->sas_hba.phy); + ioc->sas_hba.phy = NULL; + ioc->sas_hba.num_phys = 0; + } + + sas_remove_host(shost); + mpt2sas_base_detach(ioc); + list_del(&ioc->list); + scsi_remove_host(shost); + scsi_host_put(shost); +} + +/** + * _scsih_probe_boot_devices - reports 1st device + * @ioc: per adapter object + * + * If specified in bios page 2, this routine reports the 1st + * device scsi-ml or sas transport for persistent boot device + * purposes. Please refer to function _scsih_determine_boot_device() + */ +static void +_scsih_probe_boot_devices(struct MPT2SAS_ADAPTER *ioc) +{ + u8 is_raid; + void *device; + struct _sas_device *sas_device; + struct _raid_device *raid_device; + u16 handle, parent_handle; + u64 sas_address; + unsigned long flags; + int rc; + + device = NULL; + if (ioc->req_boot_device.device) { + device = ioc->req_boot_device.device; + is_raid = ioc->req_boot_device.is_raid; + } else if (ioc->req_alt_boot_device.device) { + device = ioc->req_alt_boot_device.device; + is_raid = ioc->req_alt_boot_device.is_raid; + } else if (ioc->current_boot_device.device) { + device = ioc->current_boot_device.device; + is_raid = ioc->current_boot_device.is_raid; + } + + if (!device) + return; + + if (is_raid) { + raid_device = device; + rc = scsi_add_device(ioc->shost, RAID_CHANNEL, + raid_device->id, 0); + if (rc) + _scsih_raid_device_remove(ioc, raid_device); + } else { + sas_device = device; + handle = sas_device->handle; + parent_handle = sas_device->parent_handle; + sas_address = sas_device->sas_address; + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_move_tail(&sas_device->list, &ioc->sas_device_list); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (!mpt2sas_transport_port_add(ioc, sas_device->handle, + sas_device->parent_handle)) { + _scsih_sas_device_remove(ioc, sas_device); + } else if (!sas_device->starget) { + mpt2sas_transport_port_remove(ioc, sas_address, + parent_handle); + _scsih_sas_device_remove(ioc, sas_device); + } + } +} + +/** + * _scsih_probe_raid - reporting raid volumes to scsi-ml + * @ioc: per adapter object + * + * Called during initial loading of the driver. + */ +static void +_scsih_probe_raid(struct MPT2SAS_ADAPTER *ioc) +{ + struct _raid_device *raid_device, *raid_next; + int rc; + + list_for_each_entry_safe(raid_device, raid_next, + &ioc->raid_device_list, list) { + if (raid_device->starget) + continue; + rc = scsi_add_device(ioc->shost, RAID_CHANNEL, + raid_device->id, 0); + if (rc) + _scsih_raid_device_remove(ioc, raid_device); + } +} + +/** + * _scsih_probe_sas - reporting raid volumes to sas transport + * @ioc: per adapter object + * + * Called during initial loading of the driver. + */ +static void +_scsih_probe_sas(struct MPT2SAS_ADAPTER *ioc) +{ + struct _sas_device *sas_device, *next; + unsigned long flags; + u16 handle, parent_handle; + u64 sas_address; + + /* SAS Device List */ + list_for_each_entry_safe(sas_device, next, &ioc->sas_device_init_list, + list) { + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_move_tail(&sas_device->list, &ioc->sas_device_list); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + handle = sas_device->handle; + parent_handle = sas_device->parent_handle; + sas_address = sas_device->sas_address; + if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) { + _scsih_sas_device_remove(ioc, sas_device); + } else if (!sas_device->starget) { + mpt2sas_transport_port_remove(ioc, sas_address, + parent_handle); + _scsih_sas_device_remove(ioc, sas_device); + } + } +} + +/** + * _scsih_probe_devices - probing for devices + * @ioc: per adapter object + * + * Called during initial loading of the driver. + */ +static void +_scsih_probe_devices(struct MPT2SAS_ADAPTER *ioc) +{ + u16 volume_mapping_flags = + le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) & + MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE; + + if (!(ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR)) + return; /* return when IOC doesn't support initiator mode */ + + _scsih_probe_boot_devices(ioc); + + if (ioc->ir_firmware) { + if ((volume_mapping_flags & + MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING)) { + _scsih_probe_sas(ioc); + _scsih_probe_raid(ioc); + } else { + _scsih_probe_raid(ioc); + _scsih_probe_sas(ioc); + } + } else + _scsih_probe_sas(ioc); +} + +/** + * scsih_probe - attach and add scsi host + * @pdev: PCI device struct + * @id: pci device id + * + * Returns 0 success, anything else error. + */ +static int +scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct MPT2SAS_ADAPTER *ioc; + struct Scsi_Host *shost; + + shost = scsi_host_alloc(&scsih_driver_template, + sizeof(struct MPT2SAS_ADAPTER)); + if (!shost) + return -ENODEV; + + /* init local params */ + ioc = shost_priv(shost); + memset(ioc, 0, sizeof(struct MPT2SAS_ADAPTER)); + INIT_LIST_HEAD(&ioc->list); + list_add_tail(&ioc->list, &mpt2sas_ioc_list); + ioc->shost = shost; + ioc->id = mpt_ids++; + sprintf(ioc->name, "%s%d", MPT2SAS_DRIVER_NAME, ioc->id); + ioc->pdev = pdev; + ioc->scsi_io_cb_idx = scsi_io_cb_idx; + ioc->tm_cb_idx = tm_cb_idx; + ioc->ctl_cb_idx = ctl_cb_idx; + ioc->base_cb_idx = base_cb_idx; + ioc->transport_cb_idx = transport_cb_idx; + ioc->config_cb_idx = config_cb_idx; + ioc->logging_level = logging_level; + /* misc semaphores and spin locks */ + spin_lock_init(&ioc->ioc_reset_in_progress_lock); + spin_lock_init(&ioc->scsi_lookup_lock); + spin_lock_init(&ioc->sas_device_lock); + spin_lock_init(&ioc->sas_node_lock); + spin_lock_init(&ioc->fw_event_lock); + spin_lock_init(&ioc->raid_device_lock); + + INIT_LIST_HEAD(&ioc->sas_device_list); + INIT_LIST_HEAD(&ioc->sas_device_init_list); + INIT_LIST_HEAD(&ioc->sas_expander_list); + INIT_LIST_HEAD(&ioc->fw_event_list); + INIT_LIST_HEAD(&ioc->raid_device_list); + INIT_LIST_HEAD(&ioc->sas_hba.sas_port_list); + + /* init shost parameters */ + shost->max_cmd_len = 16; + shost->max_lun = max_lun; + shost->transportt = mpt2sas_transport_template; + shost->unique_id = ioc->id; + + if ((scsi_add_host(shost, &pdev->dev))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + list_del(&ioc->list); + goto out_add_shost_fail; + } + + /* event thread */ + snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name), + "fw_event%d", ioc->id); + ioc->firmware_event_thread = create_singlethread_workqueue( + ioc->firmware_event_name); + if (!ioc->firmware_event_thread) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_thread_fail; + } + + ioc->wait_for_port_enable_to_complete = 1; + if ((mpt2sas_base_attach(ioc))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_attach_fail; + } + + ioc->wait_for_port_enable_to_complete = 0; + _scsih_probe_devices(ioc); + return 0; + + out_attach_fail: + destroy_workqueue(ioc->firmware_event_thread); + out_thread_fail: + list_del(&ioc->list); + scsi_remove_host(shost); + out_add_shost_fail: + return -ENODEV; +} + +#ifdef CONFIG_PM +/** + * scsih_suspend - power management suspend main entry point + * @pdev: PCI device struct + * @state: PM state change to (usually PCI_D3) + * + * Returns 0 success, anything else error. + */ +static int +scsih_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + u32 device_state; + + flush_scheduled_work(); + scsi_block_requests(shost); + device_state = pci_choose_state(pdev, state); + printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, entering " + "operating state [D%d]\n", ioc->name, pdev, + pci_name(pdev), device_state); + + mpt2sas_base_free_resources(ioc); + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, device_state); + return 0; +} + +/** + * scsih_resume - power management resume main entry point + * @pdev: PCI device struct + * + * Returns 0 success, anything else error. + */ +static int +scsih_resume(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + u32 device_state = pdev->current_state; + int r; + + printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, previous " + "operating state [D%d]\n", ioc->name, pdev, + pci_name(pdev), device_state); + + pci_set_power_state(pdev, PCI_D0); + pci_enable_wake(pdev, PCI_D0, 0); + pci_restore_state(pdev); + ioc->pdev = pdev; + r = mpt2sas_base_map_resources(ioc); + if (r) + return r; + + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, SOFT_RESET); + scsi_unblock_requests(shost); + return 0; +} +#endif /* CONFIG_PM */ + + +static struct pci_driver scsih_driver = { + .name = MPT2SAS_DRIVER_NAME, + .id_table = scsih_pci_table, + .probe = scsih_probe, + .remove = __devexit_p(scsih_remove), +#ifdef CONFIG_PM + .suspend = scsih_suspend, + .resume = scsih_resume, +#endif +}; + + +/** + * scsih_init - main entry point for this driver. + * + * Returns 0 success, anything else error. + */ +static int __init +scsih_init(void) +{ + int error; + + mpt_ids = 0; + printk(KERN_INFO "%s version %s loaded\n", MPT2SAS_DRIVER_NAME, + MPT2SAS_DRIVER_VERSION); + + mpt2sas_transport_template = + sas_attach_transport(&mpt2sas_transport_functions); + if (!mpt2sas_transport_template) + return -ENODEV; + + mpt2sas_base_initialize_callback_handler(); + + /* queuecommand callback hander */ + scsi_io_cb_idx = mpt2sas_base_register_callback_handler(scsih_io_done); + + /* task managment callback handler */ + tm_cb_idx = mpt2sas_base_register_callback_handler(scsih_tm_done); + + /* base internal commands callback handler */ + base_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_base_done); + + /* transport internal commands callback handler */ + transport_cb_idx = mpt2sas_base_register_callback_handler( + mpt2sas_transport_done); + + /* configuration page API internal commands callback handler */ + config_cb_idx = mpt2sas_base_register_callback_handler( + mpt2sas_config_done); + + /* ctl module callback handler */ + ctl_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_ctl_done); + + mpt2sas_ctl_init(); + + error = pci_register_driver(&scsih_driver); + if (error) + sas_release_transport(mpt2sas_transport_template); + + return error; +} + +/** + * scsih_exit - exit point for this driver (when it is a module). + * + * Returns 0 success, anything else error. + */ +static void __exit +scsih_exit(void) +{ + printk(KERN_INFO "mpt2sas version %s unloading\n", + MPT2SAS_DRIVER_VERSION); + + pci_unregister_driver(&scsih_driver); + + sas_release_transport(mpt2sas_transport_template); + mpt2sas_base_release_callback_handler(scsi_io_cb_idx); + mpt2sas_base_release_callback_handler(tm_cb_idx); + mpt2sas_base_release_callback_handler(base_cb_idx); + mpt2sas_base_release_callback_handler(transport_cb_idx); + mpt2sas_base_release_callback_handler(config_cb_idx); + mpt2sas_base_release_callback_handler(ctl_cb_idx); + + mpt2sas_ctl_exit(); +} + +module_init(scsih_init); +module_exit(scsih_exit); |
