summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/lpfc')
-rw-r--r--drivers/scsi/lpfc/lpfc.h123
-rw-r--r--drivers/scsi/lpfc/lpfc_attr.c250
-rw-r--r--drivers/scsi/lpfc/lpfc_crtn.h63
-rw-r--r--drivers/scsi/lpfc/lpfc_ct.c15
-rw-r--r--drivers/scsi/lpfc/lpfc_debugfs.c21
-rw-r--r--drivers/scsi/lpfc/lpfc_disc.h1
-rw-r--r--drivers/scsi/lpfc/lpfc_els.c275
-rw-r--r--drivers/scsi/lpfc/lpfc_hbadisc.c1365
-rw-r--r--drivers/scsi/lpfc/lpfc_hw.h142
-rw-r--r--drivers/scsi/lpfc/lpfc_hw4.h2141
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c5626
-rw-r--r--drivers/scsi/lpfc/lpfc_logmsg.h54
-rw-r--r--drivers/scsi/lpfc/lpfc_mbox.c674
-rw-r--r--drivers/scsi/lpfc/lpfc_mem.c206
-rw-r--r--drivers/scsi/lpfc/lpfc_nportdisc.c51
-rw-r--r--drivers/scsi/lpfc/lpfc_scsi.c934
-rw-r--r--drivers/scsi/lpfc/lpfc_scsi.h2
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c6683
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.h29
-rw-r--r--drivers/scsi/lpfc/lpfc_sli4.h467
-rw-r--r--drivers/scsi/lpfc/lpfc_version.h2
-rw-r--r--drivers/scsi/lpfc/lpfc_vport.c62
22 files changed, 17514 insertions, 1672 deletions
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 1105f9a..5405698 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -23,6 +23,13 @@
struct lpfc_sli2_slim;
+#define LPFC_PCI_DEV_LP 0x1
+#define LPFC_PCI_DEV_OC 0x2
+
+#define LPFC_SLI_REV2 2
+#define LPFC_SLI_REV3 3
+#define LPFC_SLI_REV4 4
+
#define LPFC_MAX_TARGET 4096 /* max number of targets supported */
#define LPFC_MAX_DISC_THREADS 64 /* max outstanding discovery els
requests */
@@ -98,9 +105,11 @@ struct lpfc_dma_pool {
};
struct hbq_dmabuf {
+ struct lpfc_dmabuf hbuf;
struct lpfc_dmabuf dbuf;
uint32_t size;
uint32_t tag;
+ struct lpfc_rcqe rcqe;
};
/* Priority bit. Set value to exceed low water mark in lpfc_mem. */
@@ -134,7 +143,10 @@ typedef struct lpfc_vpd {
} rev;
struct {
#ifdef __BIG_ENDIAN_BITFIELD
- uint32_t rsvd2 :24; /* Reserved */
+ uint32_t rsvd3 :19; /* Reserved */
+ uint32_t cdss : 1; /* Configure Data Security SLI */
+ uint32_t rsvd2 : 3; /* Reserved */
+ uint32_t cbg : 1; /* Configure BlockGuard */
uint32_t cmv : 1; /* Configure Max VPIs */
uint32_t ccrp : 1; /* Config Command Ring Polling */
uint32_t csah : 1; /* Configure Synchronous Abort Handling */
@@ -152,7 +164,10 @@ typedef struct lpfc_vpd {
uint32_t csah : 1; /* Configure Synchronous Abort Handling */
uint32_t ccrp : 1; /* Config Command Ring Polling */
uint32_t cmv : 1; /* Configure Max VPIs */
- uint32_t rsvd2 :24; /* Reserved */
+ uint32_t cbg : 1; /* Configure BlockGuard */
+ uint32_t rsvd2 : 3; /* Reserved */
+ uint32_t cdss : 1; /* Configure Data Security SLI */
+ uint32_t rsvd3 :19; /* Reserved */
#endif
} sli3Feat;
} lpfc_vpd_t;
@@ -264,8 +279,8 @@ enum hba_state {
};
struct lpfc_vport {
- struct list_head listentry;
struct lpfc_hba *phba;
+ struct list_head listentry;
uint8_t port_type;
#define LPFC_PHYSICAL_PORT 1
#define LPFC_NPIV_PORT 2
@@ -273,6 +288,9 @@ struct lpfc_vport {
enum discovery_state port_state;
uint16_t vpi;
+ uint16_t vfi;
+ uint8_t vfi_state;
+#define LPFC_VFI_REGISTERED 0x1
uint32_t fc_flag; /* FC flags */
/* Several of these flags are HBA centric and should be moved to
@@ -385,6 +403,9 @@ struct lpfc_vport {
#endif
uint8_t stat_data_enabled;
uint8_t stat_data_blocked;
+ struct list_head rcv_buffer_list;
+ uint32_t vport_flag;
+#define STATIC_VPORT 1
};
struct hbq_s {
@@ -420,8 +441,66 @@ enum intr_type_t {
};
struct lpfc_hba {
+ /* SCSI interface function jump table entries */
+ int (*lpfc_new_scsi_buf)
+ (struct lpfc_vport *, int);
+ struct lpfc_scsi_buf * (*lpfc_get_scsi_buf)
+ (struct lpfc_hba *);
+ int (*lpfc_scsi_prep_dma_buf)
+ (struct lpfc_hba *, struct lpfc_scsi_buf *);
+ void (*lpfc_scsi_unprep_dma_buf)
+ (struct lpfc_hba *, struct lpfc_scsi_buf *);
+ void (*lpfc_release_scsi_buf)
+ (struct lpfc_hba *, struct lpfc_scsi_buf *);
+ void (*lpfc_rampdown_queue_depth)
+ (struct lpfc_hba *);
+ void (*lpfc_scsi_prep_cmnd)
+ (struct lpfc_vport *, struct lpfc_scsi_buf *,
+ struct lpfc_nodelist *);
+ int (*lpfc_scsi_prep_task_mgmt_cmd)
+ (struct lpfc_vport *, struct lpfc_scsi_buf *,
+ unsigned int, uint8_t);
+
+ /* IOCB interface function jump table entries */
+ int (*__lpfc_sli_issue_iocb)
+ (struct lpfc_hba *, uint32_t,
+ struct lpfc_iocbq *, uint32_t);
+ void (*__lpfc_sli_release_iocbq)(struct lpfc_hba *,
+ struct lpfc_iocbq *);
+ int (*lpfc_hba_down_post)(struct lpfc_hba *phba);
+
+
+ IOCB_t * (*lpfc_get_iocb_from_iocbq)
+ (struct lpfc_iocbq *);
+ void (*lpfc_scsi_cmd_iocb_cmpl)
+ (struct lpfc_hba *, struct lpfc_iocbq *, struct lpfc_iocbq *);
+
+ /* MBOX interface function jump table entries */
+ int (*lpfc_sli_issue_mbox)
+ (struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
+ /* Slow-path IOCB process function jump table entries */
+ void (*lpfc_sli_handle_slow_ring_event)
+ (struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+ uint32_t mask);
+ /* INIT device interface function jump table entries */
+ int (*lpfc_sli_hbq_to_firmware)
+ (struct lpfc_hba *, uint32_t, struct hbq_dmabuf *);
+ int (*lpfc_sli_brdrestart)
+ (struct lpfc_hba *);
+ int (*lpfc_sli_brdready)
+ (struct lpfc_hba *, uint32_t);
+ void (*lpfc_handle_eratt)
+ (struct lpfc_hba *);
+ void (*lpfc_stop_port)
+ (struct lpfc_hba *);
+
+
+ /* SLI4 specific HBA data structure */
+ struct lpfc_sli4_hba sli4_hba;
+
struct lpfc_sli sli;
- uint32_t sli_rev; /* SLI2 or SLI3 */
+ uint8_t pci_dev_grp; /* lpfc PCI dev group: 0x0, 0x1, 0x2,... */
+ uint32_t sli_rev; /* SLI2, SLI3, or SLI4 */
uint32_t sli3_options; /* Mask of enabled SLI3 options */
#define LPFC_SLI3_HBQ_ENABLED 0x01
#define LPFC_SLI3_NPIV_ENABLED 0x02
@@ -429,6 +508,7 @@ struct lpfc_hba {
#define LPFC_SLI3_CRP_ENABLED 0x08
#define LPFC_SLI3_INB_ENABLED 0x10
#define LPFC_SLI3_BG_ENABLED 0x20
+#define LPFC_SLI3_DSS_ENABLED 0x40
uint32_t iocb_cmd_size;
uint32_t iocb_rsp_size;
@@ -442,8 +522,13 @@ struct lpfc_hba {
uint32_t hba_flag; /* hba generic flags */
#define HBA_ERATT_HANDLED 0x1 /* This flag is set when eratt handled */
-
-#define DEFER_ERATT 0x4 /* Deferred error attention in progress */
+#define DEFER_ERATT 0x2 /* Deferred error attention in progress */
+#define HBA_FCOE_SUPPORT 0x4 /* HBA function supports FCOE */
+#define HBA_RECEIVE_BUFFER 0x8 /* Rcv buffer posted to worker thread */
+#define HBA_POST_RECEIVE_BUFFER 0x10 /* Rcv buffers need to be posted */
+#define FCP_XRI_ABORT_EVENT 0x20
+#define ELS_XRI_ABORT_EVENT 0x40
+#define ASYNC_EVENT 0x80
struct lpfc_dmabuf slim2p;
MAILBOX_t *mbox;
@@ -502,6 +587,9 @@ struct lpfc_hba {
uint32_t cfg_poll;
uint32_t cfg_poll_tmo;
uint32_t cfg_use_msi;
+ uint32_t cfg_fcp_imax;
+ uint32_t cfg_fcp_wq_count;
+ uint32_t cfg_fcp_eq_count;
uint32_t cfg_sg_seg_cnt;
uint32_t cfg_prot_sg_seg_cnt;
uint32_t cfg_sg_dma_buf_size;
@@ -511,6 +599,8 @@ struct lpfc_hba {
uint32_t cfg_enable_hba_reset;
uint32_t cfg_enable_hba_heartbeat;
uint32_t cfg_enable_bg;
+ uint32_t cfg_enable_fip;
+ uint32_t cfg_log_verbose;
lpfc_vpd_t vpd; /* vital product data */
@@ -526,11 +616,12 @@ struct lpfc_hba {
unsigned long data_flags;
uint32_t hbq_in_use; /* HBQs in use flag */
- struct list_head hbqbuf_in_list; /* in-fly hbq buffer list */
+ struct list_head rb_pend_list; /* Received buffers to be processed */
uint32_t hbq_count; /* Count of configured HBQs */
struct hbq_s hbqs[LPFC_MAX_HBQS]; /* local copy of hbq indicies */
unsigned long pci_bar0_map; /* Physical address for PCI BAR0 */
+ unsigned long pci_bar1_map; /* Physical address for PCI BAR1 */
unsigned long pci_bar2_map; /* Physical address for PCI BAR2 */
void __iomem *slim_memmap_p; /* Kernel memory mapped address for
PCI BAR0 */
@@ -593,7 +684,8 @@ struct lpfc_hba {
/* pci_mem_pools */
struct pci_pool *lpfc_scsi_dma_buf_pool;
struct pci_pool *lpfc_mbuf_pool;
- struct pci_pool *lpfc_hbq_pool;
+ struct pci_pool *lpfc_hrb_pool; /* header receive buffer pool */
+ struct pci_pool *lpfc_drb_pool; /* data receive buffer pool */
struct lpfc_dma_pool lpfc_mbuf_safety_pool;
mempool_t *mbox_mem_pool;
@@ -609,6 +701,14 @@ struct lpfc_hba {
struct lpfc_vport *pport; /* physical lpfc_vport pointer */
uint16_t max_vpi; /* Maximum virtual nports */
#define LPFC_MAX_VPI 0xFFFF /* Max number of VPI supported */
+ uint16_t max_vports; /*
+ * For IOV HBAs max_vpi can change
+ * after a reset. max_vports is max
+ * number of vports present. This can
+ * be greater than max_vpi.
+ */
+ uint16_t vpi_base;
+ uint16_t vfi_base;
unsigned long *vpi_bmask; /* vpi allocation table */
/* Data structure used by fabric iocb scheduler */
@@ -667,6 +767,11 @@ struct lpfc_hba {
/* Maximum number of events that can be outstanding at any time*/
#define LPFC_MAX_EVT_COUNT 512
atomic_t fast_event_count;
+ struct lpfc_fcf fcf;
+ uint8_t fc_map[3];
+ uint8_t valid_vlan;
+ uint16_t vlan_id;
+ struct list_head fcf_conn_rec_list;
};
static inline struct Scsi_Host *
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index c14f0cb..d73e677 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -30,8 +30,10 @@
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -505,12 +507,14 @@ lpfc_issue_lip(struct Scsi_Host *shost)
return -ENOMEM;
memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t));
- pmboxq->mb.mbxCommand = MBX_DOWN_LINK;
- pmboxq->mb.mbxOwner = OWN_HOST;
+ pmboxq->u.mb.mbxCommand = MBX_DOWN_LINK;
+ pmboxq->u.mb.mbxOwner = OWN_HOST;
mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO * 2);
- if ((mbxstatus == MBX_SUCCESS) && (pmboxq->mb.mbxStatus == 0)) {
+ if ((mbxstatus == MBX_SUCCESS) &&
+ (pmboxq->u.mb.mbxStatus == 0 ||
+ pmboxq->u.mb.mbxStatus == MBXERR_LINK_DOWN)) {
memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t));
lpfc_init_link(phba, pmboxq, phba->cfg_topology,
phba->cfg_link_speed);
@@ -789,7 +793,8 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
uint32_t *mrpi, uint32_t *arpi,
uint32_t *mvpi, uint32_t *avpi)
{
- struct lpfc_sli *psli = &phba->sli;
+ struct lpfc_sli *psli = &phba->sli;
+ struct lpfc_mbx_read_config *rd_config;
LPFC_MBOXQ_t *pmboxq;
MAILBOX_t *pmb;
int rc = 0;
@@ -800,7 +805,7 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
*/
if (phba->link_state < LPFC_LINK_DOWN ||
!phba->mbox_mem_pool ||
- (phba->sli.sli_flag & LPFC_SLI2_ACTIVE) == 0)
+ (phba->sli.sli_flag & LPFC_SLI_ACTIVE) == 0)
return 0;
if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)
@@ -811,13 +816,13 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
return 0;
memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t));
- pmb = &pmboxq->mb;
+ pmb = &pmboxq->u.mb;
pmb->mbxCommand = MBX_READ_CONFIG;
pmb->mbxOwner = OWN_HOST;
pmboxq->context1 = NULL;
if ((phba->pport->fc_flag & FC_OFFLINE_MODE) ||
- (!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+ (!(psli->sli_flag & LPFC_SLI_ACTIVE)))
rc = MBX_NOT_FINISHED;
else
rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -828,18 +833,37 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
return 0;
}
- if (mrpi)
- *mrpi = pmb->un.varRdConfig.max_rpi;
- if (arpi)
- *arpi = pmb->un.varRdConfig.avail_rpi;
- if (mxri)
- *mxri = pmb->un.varRdConfig.max_xri;
- if (axri)
- *axri = pmb->un.varRdConfig.avail_xri;
- if (mvpi)
- *mvpi = pmb->un.varRdConfig.max_vpi;
- if (avpi)
- *avpi = pmb->un.varRdConfig.avail_vpi;
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ rd_config = &pmboxq->u.mqe.un.rd_config;
+ if (mrpi)
+ *mrpi = bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config);
+ if (arpi)
+ *arpi = bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config) -
+ phba->sli4_hba.max_cfg_param.rpi_used;
+ if (mxri)
+ *mxri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
+ if (axri)
+ *axri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config) -
+ phba->sli4_hba.max_cfg_param.xri_used;
+ if (mvpi)
+ *mvpi = bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config);
+ if (avpi)
+ *avpi = bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) -
+ phba->sli4_hba.max_cfg_param.vpi_used;
+ } else {
+ if (mrpi)
+ *mrpi = pmb->un.varRdConfig.max_rpi;
+ if (arpi)
+ *arpi = pmb->un.varRdConfig.avail_rpi;
+ if (mxri)
+ *mxri = pmb->un.varRdConfig.max_xri;
+ if (axri)
+ *axri = pmb->un.varRdConfig.avail_xri;
+ if (mvpi)
+ *mvpi = pmb->un.varRdConfig.max_vpi;
+ if (avpi)
+ *avpi = pmb->un.varRdConfig.avail_vpi;
+ }
mempool_free(pmboxq, phba->mbox_mem_pool);
return 1;
@@ -2021,22 +2045,9 @@ static DEVICE_ATTR(lpfc_devloss_tmo, S_IRUGO | S_IWUSR,
# lpfc_log_verbose: Only turn this flag on if you are willing to risk being
# deluged with LOTS of information.
# You can set a bit mask to record specific types of verbose messages:
-#
-# LOG_ELS 0x1 ELS events
-# LOG_DISCOVERY 0x2 Link discovery events
-# LOG_MBOX 0x4 Mailbox events
-# LOG_INIT 0x8 Initialization events
-# LOG_LINK_EVENT 0x10 Link events
-# LOG_FCP 0x40 FCP traffic history
-# LOG_NODE 0x80 Node table events
-# LOG_BG 0x200 BlockBuard events
-# LOG_MISC 0x400 Miscellaneous events
-# LOG_SLI 0x800 SLI events
-# LOG_FCP_ERROR 0x1000 Only log FCP errors
-# LOG_LIBDFC 0x2000 LIBDFC events
-# LOG_ALL_MSG 0xffff LOG all messages
+# See lpfc_logmsh.h for definitions.
*/
-LPFC_VPORT_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffff,
+LPFC_VPORT_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffffffff,
"Verbose logging bit-mask");
/*
@@ -2266,6 +2277,36 @@ lpfc_param_init(topology, 0, 0, 6)
static DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR,
lpfc_topology_show, lpfc_topology_store);
+/**
+ * lpfc_static_vport_show: Read callback function for
+ * lpfc_static_vport sysfs file.
+ * @dev: Pointer to class device object.
+ * @attr: device attribute structure.
+ * @buf: Data buffer.
+ *
+ * This function is the read call back function for
+ * lpfc_static_vport sysfs file. The lpfc_static_vport
+ * sysfs file report the mageability of the vport.
+ **/
+static ssize_t
+lpfc_static_vport_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ if (vport->vport_flag & STATIC_VPORT)
+ sprintf(buf, "1\n");
+ else
+ sprintf(buf, "0\n");
+
+ return strlen(buf);
+}
+
+/*
+ * Sysfs attribute to control the statistical data collection.
+ */
+static DEVICE_ATTR(lpfc_static_vport, S_IRUGO,
+ lpfc_static_vport_show, NULL);
/**
* lpfc_stat_data_ctrl_store - write call back for lpfc_stat_data_ctrl sysfs file
@@ -2341,7 +2382,7 @@ lpfc_stat_data_ctrl_store(struct device *dev, struct device_attribute *attr,
if (vports == NULL)
return -ENOMEM;
- for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
v_shost = lpfc_shost_from_vport(vports[i]);
spin_lock_irq(v_shost->host_lock);
/* Block and reset data collection */
@@ -2356,7 +2397,7 @@ lpfc_stat_data_ctrl_store(struct device *dev, struct device_attribute *attr,
phba->bucket_base = base;
phba->bucket_step = step;
- for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
v_shost = lpfc_shost_from_vport(vports[i]);
/* Unblock data collection */
@@ -2373,7 +2414,7 @@ lpfc_stat_data_ctrl_store(struct device *dev, struct device_attribute *attr,
if (vports == NULL)
return -ENOMEM;
- for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
v_shost = lpfc_shost_from_vport(vports[i]);
spin_lock_irq(shost->host_lock);
vports[i]->stat_data_blocked = 1;
@@ -2844,15 +2885,39 @@ LPFC_ATTR_RW(poll_tmo, 10, 1, 255,
/*
# lpfc_use_msi: Use MSI (Message Signaled Interrupts) in systems that
# support this feature
-# 0 = MSI disabled
+# 0 = MSI disabled (default)
# 1 = MSI enabled
-# 2 = MSI-X enabled (default)
-# Value range is [0,2]. Default value is 2.
+# 2 = MSI-X enabled
+# Value range is [0,2]. Default value is 0.
*/
-LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Message Signaled Interrupts (1) or "
+LPFC_ATTR_R(use_msi, 0, 0, 2, "Use Message Signaled Interrupts (1) or "
"MSI-X (2), if possible");
/*
+# lpfc_fcp_imax: Set the maximum number of fast-path FCP interrupts per second
+#
+# Value range is [636,651042]. Default value is 10000.
+*/
+LPFC_ATTR_R(fcp_imax, LPFC_FP_DEF_IMAX, LPFC_MIM_IMAX, LPFC_DMULT_CONST,
+ "Set the maximum number of fast-path FCP interrupts per second");
+
+/*
+# lpfc_fcp_wq_count: Set the number of fast-path FCP work queues
+#
+# Value range is [1,31]. Default value is 4.
+*/
+LPFC_ATTR_R(fcp_wq_count, LPFC_FP_WQN_DEF, LPFC_FP_WQN_MIN, LPFC_FP_WQN_MAX,
+ "Set the number of fast-path FCP work queues, if possible");
+
+/*
+# lpfc_fcp_eq_count: Set the number of fast-path FCP event queues
+#
+# Value range is [1,7]. Default value is 1.
+*/
+LPFC_ATTR_R(fcp_eq_count, LPFC_FP_EQN_DEF, LPFC_FP_EQN_MIN, LPFC_FP_EQN_MAX,
+ "Set the number of fast-path FCP event queues, if possible");
+
+/*
# lpfc_enable_hba_reset: Allow or prevent HBA resets to the hardware.
# 0 = HBA resets disabled
# 1 = HBA resets enabled (default)
@@ -2876,6 +2941,14 @@ LPFC_ATTR_R(enable_hba_heartbeat, 1, 0, 1, "Enable HBA Heartbeat.");
*/
LPFC_ATTR_R(enable_bg, 0, 0, 1, "Enable BlockGuard Support");
+/*
+# lpfc_enable_fip: When set, FIP is required to start discovery. If not
+# set, the driver will add an FCF record manually if the port has no
+# FCF records available and start discovery.
+# Value range is [0,1]. Default value is 1 (enabled)
+*/
+LPFC_ATTR_RW(enable_fip, 0, 0, 1, "Enable FIP Discovery");
+
/*
# lpfc_prot_mask: i
@@ -2942,6 +3015,7 @@ struct device_attribute *lpfc_hba_attrs[] = {
&dev_attr_lpfc_peer_port_login,
&dev_attr_lpfc_nodev_tmo,
&dev_attr_lpfc_devloss_tmo,
+ &dev_attr_lpfc_enable_fip,
&dev_attr_lpfc_fcp_class,
&dev_attr_lpfc_use_adisc,
&dev_attr_lpfc_ack0,
@@ -2969,6 +3043,9 @@ struct device_attribute *lpfc_hba_attrs[] = {
&dev_attr_lpfc_poll,
&dev_attr_lpfc_poll_tmo,
&dev_attr_lpfc_use_msi,
+ &dev_attr_lpfc_fcp_imax,
+ &dev_attr_lpfc_fcp_wq_count,
+ &dev_attr_lpfc_fcp_eq_count,
&dev_attr_lpfc_enable_bg,
&dev_attr_lpfc_soft_wwnn,
&dev_attr_lpfc_soft_wwpn,
@@ -2991,6 +3068,7 @@ struct device_attribute *lpfc_vport_attrs[] = {
&dev_attr_lpfc_lun_queue_depth,
&dev_attr_lpfc_nodev_tmo,
&dev_attr_lpfc_devloss_tmo,
+ &dev_attr_lpfc_enable_fip,
&dev_attr_lpfc_hba_queue_depth,
&dev_attr_lpfc_peer_port_login,
&dev_attr_lpfc_restrict_login,
@@ -3003,6 +3081,7 @@ struct device_attribute *lpfc_vport_attrs[] = {
&dev_attr_lpfc_enable_da_id,
&dev_attr_lpfc_max_scsicmpl_time,
&dev_attr_lpfc_stat_data_ctrl,
+ &dev_attr_lpfc_static_vport,
NULL,
};
@@ -3199,7 +3278,7 @@ sysfs_mbox_write(struct kobject *kobj, struct bin_attribute *bin_attr,
}
}
- memcpy((uint8_t *) & phba->sysfs_mbox.mbox->mb + off,
+ memcpy((uint8_t *) &phba->sysfs_mbox.mbox->u.mb + off,
buf, count);
phba->sysfs_mbox.offset = off + count;
@@ -3241,6 +3320,7 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
int rc;
+ MAILBOX_t *pmb;
if (off > MAILBOX_CMD_SIZE)
return -ERANGE;
@@ -3265,8 +3345,8 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
if (off == 0 &&
phba->sysfs_mbox.state == SMBOX_WRITING &&
phba->sysfs_mbox.offset >= 2 * sizeof(uint32_t)) {
-
- switch (phba->sysfs_mbox.mbox->mb.mbxCommand) {
+ pmb = &phba->sysfs_mbox.mbox->u.mb;
+ switch (pmb->mbxCommand) {
/* Offline only */
case MBX_INIT_LINK:
case MBX_DOWN_LINK:
@@ -3283,7 +3363,7 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
if (!(vport->fc_flag & FC_OFFLINE_MODE)) {
printk(KERN_WARNING "mbox_read:Command 0x%x "
"is illegal in on-line state\n",
- phba->sysfs_mbox.mbox->mb.mbxCommand);
+ pmb->mbxCommand);
sysfs_mbox_idle(phba);
spin_unlock_irq(&phba->hbalock);
return -EPERM;
@@ -3319,13 +3399,13 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
case MBX_CONFIG_PORT:
case MBX_RUN_BIU_DIAG:
printk(KERN_WARNING "mbox_read: Illegal Command 0x%x\n",
- phba->sysfs_mbox.mbox->mb.mbxCommand);
+ pmb->mbxCommand);
sysfs_mbox_idle(phba);
spin_unlock_irq(&phba->hbalock);
return -EPERM;
default:
printk(KERN_WARNING "mbox_read: Unknown Command 0x%x\n",
- phba->sysfs_mbox.mbox->mb.mbxCommand);
+ pmb->mbxCommand);
sysfs_mbox_idle(phba);
spin_unlock_irq(&phba->hbalock);
return -EPERM;
@@ -3335,14 +3415,14 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
* or RESTART mailbox commands until the HBA is restarted.
*/
if (phba->pport->stopped &&
- phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_DUMP_MEMORY &&
- phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_RESTART &&
- phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_WRITE_VPARMS &&
- phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_WRITE_WWN)
+ pmb->mbxCommand != MBX_DUMP_MEMORY &&
+ pmb->mbxCommand != MBX_RESTART &&
+ pmb->mbxCommand != MBX_WRITE_VPARMS &&
+ pmb->mbxCommand != MBX_WRITE_WWN)
lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
"1259 mbox: Issued mailbox cmd "
"0x%x while in stopped state.\n",
- phba->sysfs_mbox.mbox->mb.mbxCommand);
+ pmb->mbxCommand);
phba->sysfs_mbox.mbox->vport = vport;
@@ -3356,7 +3436,7 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
}
if ((vport->fc_flag & FC_OFFLINE_MODE) ||
- (!(phba->sli.sli_flag & LPFC_SLI2_ACTIVE))){
+ (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE))) {
spin_unlock_irq(&phba->hbalock);
rc = lpfc_sli_issue_mbox (phba,
@@ -3368,8 +3448,7 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
spin_unlock_irq(&phba->hbalock);
rc = lpfc_sli_issue_mbox_wait (phba,
phba->sysfs_mbox.mbox,
- lpfc_mbox_tmo_val(phba,
- phba->sysfs_mbox.mbox->mb.mbxCommand) * HZ);
+ lpfc_mbox_tmo_val(phba, pmb->mbxCommand) * HZ);
spin_lock_irq(&phba->hbalock);
}
@@ -3391,7 +3470,7 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
return -EAGAIN;
}
- memcpy(buf, (uint8_t *) & phba->sysfs_mbox.mbox->mb + off, count);
+ memcpy(buf, (uint8_t *) &pmb + off, count);
phba->sysfs_mbox.offset = off + count;
@@ -3585,6 +3664,9 @@ lpfc_get_host_speed(struct Scsi_Host *shost)
case LA_8GHZ_LINK:
fc_host_speed(shost) = FC_PORTSPEED_8GBIT;
break;
+ case LA_10GHZ_LINK:
+ fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
+ break;
default:
fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
break;
@@ -3652,7 +3734,7 @@ lpfc_get_stats(struct Scsi_Host *shost)
*/
if (phba->link_state < LPFC_LINK_DOWN ||
!phba->mbox_mem_pool ||
- (phba->sli.sli_flag & LPFC_SLI2_ACTIVE) == 0)
+ (phba->sli.sli_flag & LPFC_SLI_ACTIVE) == 0)
return NULL;
if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)
@@ -3663,14 +3745,14 @@ lpfc_get_stats(struct Scsi_Host *shost)
return NULL;
memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t));
- pmb = &pmboxq->mb;
+ pmb = &pmboxq->u.mb;
pmb->mbxCommand = MBX_READ_STATUS;
pmb->mbxOwner = OWN_HOST;
pmboxq->context1 = NULL;
pmboxq->vport = vport;
if ((vport->fc_flag & FC_OFFLINE_MODE) ||
- (!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+ (!(psli->sli_flag & LPFC_SLI_ACTIVE)))
rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
else
rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -3695,7 +3777,7 @@ lpfc_get_stats(struct Scsi_Host *shost)
pmboxq->vport = vport;
if ((vport->fc_flag & FC_OFFLINE_MODE) ||
- (!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+ (!(psli->sli_flag & LPFC_SLI_ACTIVE)))
rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
else
rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -3769,7 +3851,7 @@ lpfc_reset_stats(struct Scsi_Host *shost)
return;
memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t));
- pmb = &pmboxq->mb;
+ pmb = &pmboxq->u.mb;
pmb->mbxCommand = MBX_READ_STATUS;
pmb->mbxOwner = OWN_HOST;
pmb->un.varWords[0] = 0x1; /* reset request */
@@ -3777,7 +3859,7 @@ lpfc_reset_stats(struct Scsi_Host *shost)
pmboxq->vport = vport;
if ((vport->fc_flag & FC_OFFLINE_MODE) ||
- (!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+ (!(psli->sli_flag & LPFC_SLI_ACTIVE)))
rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
else
rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -3795,7 +3877,7 @@ lpfc_reset_stats(struct Scsi_Host *shost)
pmboxq->vport = vport;
if ((vport->fc_flag & FC_OFFLINE_MODE) ||
- (!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+ (!(psli->sli_flag & LPFC_SLI_ACTIVE)))
rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
else
rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -3962,6 +4044,21 @@ lpfc_set_vport_symbolic_name(struct fc_vport *fc_vport)
lpfc_ns_cmd(vport, SLI_CTNS_RSPN_ID, 0, 0);
}
+/**
+ * lpfc_hba_log_verbose_init - Set hba's log verbose level
+ * @phba: Pointer to lpfc_hba struct.
+ *
+ * This function is called by the lpfc_get_cfgparam() routine to set the
+ * module lpfc_log_verbose into the @phba cfg_log_verbose for use with
+ * log messsage according to the module's lpfc_log_verbose parameter setting
+ * before hba port or vport created.
+ **/
+static void
+lpfc_hba_log_verbose_init(struct lpfc_hba *phba, uint32_t verbose)
+{
+ phba->cfg_log_verbose = verbose;
+}
+
struct fc_function_template lpfc_transport_functions = {
/* fixed attributes the driver supports */
.show_host_node_name = 1,
@@ -4105,6 +4202,9 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
lpfc_poll_tmo_init(phba, lpfc_poll_tmo);
lpfc_enable_npiv_init(phba, lpfc_enable_npiv);
lpfc_use_msi_init(phba, lpfc_use_msi);
+ lpfc_fcp_imax_init(phba, lpfc_fcp_imax);
+ lpfc_fcp_wq_count_init(phba, lpfc_fcp_wq_count);
+ lpfc_fcp_eq_count_init(phba, lpfc_fcp_eq_count);
lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset);
lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat);
lpfc_enable_bg_init(phba, lpfc_enable_bg);
@@ -4113,26 +4213,10 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
phba->cfg_soft_wwpn = 0L;
lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt);
lpfc_prot_sg_seg_cnt_init(phba, lpfc_prot_sg_seg_cnt);
- /*
- * Since the sg_tablesize is module parameter, the sg_dma_buf_size
- * used to create the sg_dma_buf_pool must be dynamically calculated.
- * 2 segments are added since the IOCB needs a command and response bde.
- */
- phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
- sizeof(struct fcp_rsp) +
- ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));
-
- if (phba->cfg_enable_bg) {
- phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SEG_CNT;
- phba->cfg_sg_dma_buf_size +=
- phba->cfg_prot_sg_seg_cnt * sizeof(struct ulp_bde64);
- }
-
- /* Also reinitialize the host templates with new values. */
- lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
- lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
-
lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth);
+ lpfc_enable_fip_init(phba, lpfc_enable_fip);
+ lpfc_hba_log_verbose_init(phba, lpfc_log_verbose);
+
return;
}
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index f88ce3f..d2a9229 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -23,6 +23,8 @@ typedef int (*node_filter)(struct lpfc_nodelist *, void *);
struct fc_rport;
void lpfc_dump_mem(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t);
void lpfc_dump_wakeup_param(struct lpfc_hba *, LPFC_MBOXQ_t *);
+void lpfc_dump_static_vport(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t);
+int lpfc_dump_fcoe_param(struct lpfc_hba *, struct lpfcMboxq *);
void lpfc_read_nv(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_config_async(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
@@ -35,17 +37,19 @@ int lpfc_config_msi(struct lpfc_hba *, LPFC_MBOXQ_t *);
int lpfc_read_sparam(struct lpfc_hba *, LPFC_MBOXQ_t *, int);
void lpfc_read_config(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_read_lnk_stat(struct lpfc_hba *, LPFC_MBOXQ_t *);
-int lpfc_reg_login(struct lpfc_hba *, uint16_t, uint32_t, uint8_t *,
- LPFC_MBOXQ_t *, uint32_t);
+int lpfc_reg_rpi(struct lpfc_hba *, uint16_t, uint32_t, uint8_t *,
+ LPFC_MBOXQ_t *, uint32_t);
void lpfc_unreg_login(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
void lpfc_unreg_did(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
-void lpfc_reg_vpi(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
+void lpfc_reg_vpi(struct lpfc_vport *, LPFC_MBOXQ_t *);
void lpfc_unreg_vpi(struct lpfc_hba *, uint16_t, LPFC_MBOXQ_t *);
void lpfc_init_link(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t, uint32_t);
+void lpfc_request_features(struct lpfc_hba *, struct lpfcMboxq *);
struct lpfc_vport *lpfc_find_vport_by_did(struct lpfc_hba *, uint32_t);
void lpfc_cleanup_rpis(struct lpfc_vport *, int);
int lpfc_linkdown(struct lpfc_hba *);
+void lpfc_linkdown_port(struct lpfc_vport *);
void lpfc_port_link_failure(struct lpfc_vport *);
void lpfc_mbx_cmpl_read_la(struct lpfc_hba *, LPFC_MBOXQ_t *);
@@ -54,6 +58,7 @@ void lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
+void lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_enqueue_node(struct lpfc_vport *, struct lpfc_nodelist *);
void lpfc_dequeue_node(struct lpfc_vport *, struct lpfc_nodelist *);
struct lpfc_nodelist *lpfc_enable_node(struct lpfc_vport *,
@@ -105,6 +110,7 @@ int lpfc_issue_els_adisc(struct lpfc_vport *, struct lpfc_nodelist *, uint8_t);
int lpfc_issue_els_logo(struct lpfc_vport *, struct lpfc_nodelist *, uint8_t);
int lpfc_issue_els_npiv_logo(struct lpfc_vport *, struct lpfc_nodelist *);
int lpfc_issue_els_scr(struct lpfc_vport *, uint32_t, uint8_t);
+int lpfc_issue_fabric_reglogin(struct lpfc_vport *);
int lpfc_els_free_iocb(struct lpfc_hba *, struct lpfc_iocbq *);
int lpfc_ct_free_iocb(struct lpfc_hba *, struct lpfc_iocbq *);
int lpfc_els_rsp_acc(struct lpfc_vport *, uint32_t, struct lpfc_iocbq *,
@@ -149,15 +155,19 @@ int lpfc_online(struct lpfc_hba *);
void lpfc_unblock_mgmt_io(struct lpfc_hba *);
void lpfc_offline_prep(struct lpfc_hba *);
void lpfc_offline(struct lpfc_hba *);
+void lpfc_reset_hba(struct lpfc_hba *);
int lpfc_sli_setup(struct lpfc_hba *);
int lpfc_sli_queue_setup(struct lpfc_hba *);
void lpfc_handle_eratt(struct lpfc_hba *);
void lpfc_handle_latt(struct lpfc_hba *);
-irqreturn_t lpfc_intr_handler(int, void *);
-irqreturn_t lpfc_sp_intr_handler(int, void *);
-irqreturn_t lpfc_fp_intr_handler(int, void *);
+irqreturn_t lpfc_sli_intr_handler(int, void *);
+irqreturn_t lpfc_sli_sp_intr_handler(int, void *);
+irqreturn_t lpfc_sli_fp_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_sp_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_fp_intr_handler(int, void *);
void lpfc_read_rev(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_config_ring(struct lpfc_hba *, int, LPFC_MBOXQ_t *);
@@ -165,16 +175,32 @@ void lpfc_config_port(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_kill_board(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_mbox_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
LPFC_MBOXQ_t *lpfc_mbox_get(struct lpfc_hba *);
+void __lpfc_mbox_cmpl_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_mbox_cmpl_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_mbox_cmd_check(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_mbox_dev_check(struct lpfc_hba *);
int lpfc_mbox_tmo_val(struct lpfc_hba *, int);
+void lpfc_init_vfi(struct lpfcMboxq *, struct lpfc_vport *);
+void lpfc_reg_vfi(struct lpfcMboxq *, struct lpfc_vport *, dma_addr_t);
+void lpfc_init_vpi(struct lpfcMboxq *, uint16_t);
+void lpfc_unreg_vfi(struct lpfcMboxq *, uint16_t);
+void lpfc_reg_fcfi(struct lpfc_hba *, struct lpfcMboxq *);
+void lpfc_unreg_fcfi(struct lpfcMboxq *, uint16_t);
+void lpfc_resume_rpi(struct lpfcMboxq *, struct lpfc_nodelist *);
void lpfc_config_hbq(struct lpfc_hba *, uint32_t, struct lpfc_hbq_init *,
uint32_t , LPFC_MBOXQ_t *);
struct hbq_dmabuf *lpfc_els_hbq_alloc(struct lpfc_hba *);
void lpfc_els_hbq_free(struct lpfc_hba *, struct hbq_dmabuf *);
+struct hbq_dmabuf *lpfc_sli4_rb_alloc(struct lpfc_hba *);
+void lpfc_sli4_rb_free(struct lpfc_hba *, struct hbq_dmabuf *);
+void lpfc_sli4_build_dflt_fcf_record(struct lpfc_hba *, struct fcf_record *,
+ uint16_t);
+void lpfc_unregister_unused_fcf(struct lpfc_hba *);
-int lpfc_mem_alloc(struct lpfc_hba *);
+int lpfc_mem_alloc(struct lpfc_hba *, int align);
void lpfc_mem_free(struct lpfc_hba *);
+void lpfc_mem_free_all(struct lpfc_hba *);
void lpfc_stop_vport_timers(struct lpfc_vport *);
void lpfc_poll_timeout(unsigned long ptr);
@@ -186,6 +212,7 @@ void lpfc_sli_release_iocbq(struct lpfc_hba *, struct lpfc_iocbq *);
uint16_t lpfc_sli_next_iotag(struct lpfc_hba *, struct lpfc_iocbq *);
void lpfc_sli_cancel_iocbs(struct lpfc_hba *, struct list_head *, uint32_t,
uint32_t);
+void lpfc_sli_wake_mbox_wait(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_reset_barrier(struct lpfc_hba * phba);
int lpfc_sli_brdready(struct lpfc_hba *, uint32_t);
@@ -198,12 +225,13 @@ int lpfc_sli_host_down(struct lpfc_vport *);
int lpfc_sli_hba_down(struct lpfc_hba *);
int lpfc_sli_issue_mbox(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
int lpfc_sli_handle_mb_event(struct lpfc_hba *);
-int lpfc_sli_flush_mbox_queue(struct lpfc_hba *);
+void lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *);
int lpfc_sli_check_eratt(struct lpfc_hba *);
-int lpfc_sli_handle_slow_ring_event(struct lpfc_hba *,
+void lpfc_sli_handle_slow_ring_event(struct lpfc_hba *,
struct lpfc_sli_ring *, uint32_t);
+int lpfc_sli4_handle_received_buffer(struct lpfc_hba *);
void lpfc_sli_def_mbox_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *);
-int lpfc_sli_issue_iocb(struct lpfc_hba *, struct lpfc_sli_ring *,
+int lpfc_sli_issue_iocb(struct lpfc_hba *, uint32_t,
struct lpfc_iocbq *, uint32_t);
void lpfc_sli_pcimem_bcopy(void *, void *, uint32_t);
void lpfc_sli_abort_iocb_ring(struct lpfc_hba *, struct lpfc_sli_ring *);
@@ -237,7 +265,7 @@ struct lpfc_nodelist *lpfc_findnode_wwpn(struct lpfc_vport *,
int lpfc_sli_issue_mbox_wait(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
-int lpfc_sli_issue_iocb_wait(struct lpfc_hba *, struct lpfc_sli_ring *,
+int lpfc_sli_issue_iocb_wait(struct lpfc_hba *, uint32_t,
struct lpfc_iocbq *, struct lpfc_iocbq *,
uint32_t);
void lpfc_sli_abort_fcp_cmpl(struct lpfc_hba *, struct lpfc_iocbq *,
@@ -254,6 +282,12 @@ void lpfc_in_buf_free(struct lpfc_hba *, struct lpfc_dmabuf *);
const char* lpfc_info(struct Scsi_Host *);
int lpfc_scan_finished(struct Scsi_Host *, unsigned long);
+int lpfc_init_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_sli_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_scsi_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_mbox_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_api_table_setup(struct lpfc_hba *, uint8_t);
+
void lpfc_get_cfgparam(struct lpfc_hba *);
void lpfc_get_vport_cfgparam(struct lpfc_vport *);
int lpfc_alloc_sysfs_attr(struct lpfc_vport *);
@@ -314,8 +348,15 @@ lpfc_send_els_failure_event(struct lpfc_hba *, struct lpfc_iocbq *,
struct lpfc_iocbq *);
struct lpfc_fast_path_event *lpfc_alloc_fast_evt(struct lpfc_hba *);
void lpfc_free_fast_evt(struct lpfc_hba *, struct lpfc_fast_path_event *);
+void lpfc_create_static_vport(struct lpfc_hba *);
+void lpfc_stop_hba_timers(struct lpfc_hba *);
+void lpfc_stop_port(struct lpfc_hba *);
+void lpfc_parse_fcoe_conf(struct lpfc_hba *, uint8_t *, uint32_t);
+int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int);
+void lpfc_start_fdiscs(struct lpfc_hba *phba);
#define ScsiResult(host_code, scsi_code) (((host_code) << 16) | scsi_code)
#define HBA_EVENT_RSCN 5
#define HBA_EVENT_LINK_UP 2
#define HBA_EVENT_LINK_DOWN 3
+
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 896c7b0..1dbccfd 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -32,8 +32,10 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -267,8 +269,6 @@ lpfc_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
uint32_t tmo, uint8_t retry)
{
struct lpfc_hba *phba = vport->phba;
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
IOCB_t *icmd;
struct lpfc_iocbq *geniocb;
int rc;
@@ -331,7 +331,7 @@ lpfc_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
geniocb->drvrTimeout = icmd->ulpTimeout + LPFC_DRVR_TIMEOUT;
geniocb->vport = vport;
geniocb->retry = retry;
- rc = lpfc_sli_issue_iocb(phba, pring, geniocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, geniocb, 0);
if (rc == IOCB_ERROR) {
lpfc_sli_release_iocbq(phba, geniocb);
@@ -1578,6 +1578,9 @@ lpfc_fdmi_cmd(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, int cmdcode)
case LA_8GHZ_LINK:
ae->un.PortSpeed = HBA_PORTSPEED_8GBIT;
break;
+ case LA_10GHZ_LINK:
+ ae->un.PortSpeed = HBA_PORTSPEED_10GBIT;
+ break;
default:
ae->un.PortSpeed =
HBA_PORTSPEED_UNKNOWN;
@@ -1730,7 +1733,7 @@ lpfc_decode_firmware_rev(struct lpfc_hba *phba, char *fwrevision, int flag)
uint8_t *fwname;
if (vp->rev.rBit) {
- if (psli->sli_flag & LPFC_SLI2_ACTIVE)
+ if (psli->sli_flag & LPFC_SLI_ACTIVE)
rev = vp->rev.sli2FwRev;
else
rev = vp->rev.sli1FwRev;
@@ -1756,7 +1759,7 @@ lpfc_decode_firmware_rev(struct lpfc_hba *phba, char *fwrevision, int flag)
}
b4 = (rev & 0x0000000f);
- if (psli->sli_flag & LPFC_SLI2_ACTIVE)
+ if (psli->sli_flag & LPFC_SLI_ACTIVE)
fwname = vp->rev.sli2FwName;
else
fwname = vp->rev.sli1FwName;
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 52be564..2b02b1f 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2007-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2007-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -33,8 +33,10 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -280,6 +282,8 @@ lpfc_debugfs_hbqinfo_data(struct lpfc_hba *phba, char *buf, int size)
struct lpfc_dmabuf *d_buf;
struct hbq_dmabuf *hbq_buf;
+ if (phba->sli_rev != 3)
+ return 0;
cnt = LPFC_HBQINFO_SIZE;
spin_lock_irq(&phba->hbalock);
@@ -489,12 +493,15 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size)
pring->next_cmdidx, pring->local_getidx,
pring->flag, pgpp->rspPutInx, pring->numRiocb);
}
- word0 = readl(phba->HAregaddr);
- word1 = readl(phba->CAregaddr);
- word2 = readl(phba->HSregaddr);
- word3 = readl(phba->HCregaddr);
- len += snprintf(buf+len, size-len, "HA:%08x CA:%08x HS:%08x HC:%08x\n",
- word0, word1, word2, word3);
+
+ if (phba->sli_rev <= LPFC_SLI_REV3) {
+ word0 = readl(phba->HAregaddr);
+ word1 = readl(phba->CAregaddr);
+ word2 = readl(phba->HSregaddr);
+ word3 = readl(phba->HCregaddr);
+ len += snprintf(buf+len, size-len, "HA:%08x CA:%08x HS:%08x "
+ "HC:%08x\n", word0, word1, word2, word3);
+ }
spin_unlock_irq(&phba->hbalock);
return len;
}
diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h
index ffd1089..1142070 100644
--- a/drivers/scsi/lpfc/lpfc_disc.h
+++ b/drivers/scsi/lpfc/lpfc_disc.h
@@ -135,6 +135,7 @@ struct lpfc_nodelist {
#define NLP_NODEV_REMOVE 0x08000000 /* Defer removal till discovery ends */
#define NLP_TARGET_REMOVE 0x10000000 /* Target remove in process */
#define NLP_SC_REQ 0x20000000 /* Target requires authentication */
+#define NLP_RPI_VALID 0x80000000 /* nlp_rpi is valid */
/* ndlp usage management macros */
#define NLP_CHK_NODE_ACT(ndlp) (((ndlp)->nlp_usg_map \
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index b8b34cf..6bdeb14 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -28,8 +28,10 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -84,7 +86,8 @@ lpfc_els_chk_latt(struct lpfc_vport *vport)
uint32_t ha_copy;
if (vport->port_state >= LPFC_VPORT_READY ||
- phba->link_state == LPFC_LINK_DOWN)
+ phba->link_state == LPFC_LINK_DOWN ||
+ phba->sli_rev > LPFC_SLI_REV3)
return 0;
/* Read the HBA Host Attention Register */
@@ -219,7 +222,7 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp,
icmd->un.elsreq64.myID = vport->fc_myDID;
/* For ELS_REQUEST64_CR, use the VPI by default */
- icmd->ulpContext = vport->vpi;
+ icmd->ulpContext = vport->vpi + phba->vpi_base;
icmd->ulpCt_h = 0;
/* The CT field must be 0=INVALID_RPI for the ECHO cmd */
if (elscmd == ELS_CMD_ECHO)
@@ -305,7 +308,7 @@ els_iocb_free_pcmb_exit:
* 0 - successfully issued fabric registration login for @vport
* -ENXIO -- failed to issue fabric registration login for @vport
**/
-static int
+int
lpfc_issue_fabric_reglogin(struct lpfc_vport *vport)
{
struct lpfc_hba *phba = vport->phba;
@@ -345,8 +348,7 @@ lpfc_issue_fabric_reglogin(struct lpfc_vport *vport)
err = 4;
goto fail;
}
- rc = lpfc_reg_login(phba, vport->vpi, Fabric_DID, (uint8_t *)sp, mbox,
- 0);
+ rc = lpfc_reg_rpi(phba, vport->vpi, Fabric_DID, (uint8_t *)sp, mbox, 0);
if (rc) {
err = 5;
goto fail_free_mbox;
@@ -386,6 +388,75 @@ fail:
}
/**
+ * lpfc_issue_reg_vfi - Register VFI for this vport's fabric login
+ * @vport: pointer to a host virtual N_Port data structure.
+ *
+ * This routine issues a REG_VFI mailbox for the vfi, vpi, fcfi triplet for
+ * the @vport. This mailbox command is necessary for FCoE only.
+ *
+ * Return code
+ * 0 - successfully issued REG_VFI for @vport
+ * A failure code otherwise.
+ **/
+static int
+lpfc_issue_reg_vfi(struct lpfc_vport *vport)
+{
+ struct lpfc_hba *phba = vport->phba;
+ LPFC_MBOXQ_t *mboxq;
+ struct lpfc_nodelist *ndlp;
+ struct serv_parm *sp;
+ struct lpfc_dmabuf *dmabuf;
+ int rc = 0;
+
+ sp = &phba->fc_fabparam;
+ ndlp = lpfc_findnode_did(vport, Fabric_DID);
+ if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
+ rc = -ENODEV;
+ goto fail;
+ }
+
+ dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (!dmabuf) {
+ rc = -ENOMEM;
+ goto fail;
+ }
+ dmabuf->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &dmabuf->phys);
+ if (!dmabuf->virt) {
+ rc = -ENOMEM;
+ goto fail_free_dmabuf;
+ }
+ mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ rc = -ENOMEM;
+ goto fail_free_coherent;
+ }
+ vport->port_state = LPFC_FABRIC_CFG_LINK;
+ memcpy(dmabuf->virt, &phba->fc_fabparam, sizeof(vport->fc_sparam));
+ lpfc_reg_vfi(mboxq, vport, dmabuf->phys);
+ mboxq->mbox_cmpl = lpfc_mbx_cmpl_reg_vfi;
+ mboxq->vport = vport;
+ mboxq->context1 = dmabuf;
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+ if (rc == MBX_NOT_FINISHED) {
+ rc = -ENXIO;
+ goto fail_free_mbox;
+ }
+ return 0;
+
+fail_free_mbox:
+ mempool_free(mboxq, phba->mbox_mem_pool);
+fail_free_coherent:
+ lpfc_mbuf_free(phba, dmabuf->virt, dmabuf->phys);
+fail_free_dmabuf:
+ kfree(dmabuf);
+fail:
+ lpfc_vport_set_state(vport, FC_VPORT_FAILED);
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+ "0289 Issue Register VFI failed: Err %d\n", rc);
+ return rc;
+}
+
+/**
* lpfc_cmpl_els_flogi_fabric - Completion function for flogi to a fabric port
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
@@ -497,17 +568,24 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
}
}
- lpfc_nlp_set_state(vport, ndlp, NLP_STE_REG_LOGIN_ISSUE);
-
- if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED &&
- vport->fc_flag & FC_VPORT_NEEDS_REG_VPI) {
- lpfc_register_new_vport(phba, vport, ndlp);
- return 0;
+ if (phba->sli_rev < LPFC_SLI_REV4) {
+ lpfc_nlp_set_state(vport, ndlp, NLP_STE_REG_LOGIN_ISSUE);
+ if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED &&
+ vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)
+ lpfc_register_new_vport(phba, vport, ndlp);
+ else
+ lpfc_issue_fabric_reglogin(vport);
+ } else {
+ ndlp->nlp_type |= NLP_FABRIC;
+ lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
+ if (vport->vfi_state & LPFC_VFI_REGISTERED) {
+ lpfc_start_fdiscs(phba);
+ lpfc_do_scr_ns_plogi(phba, vport);
+ } else
+ lpfc_issue_reg_vfi(vport);
}
- lpfc_issue_fabric_reglogin(vport);
return 0;
}
-
/**
* lpfc_cmpl_els_flogi_nport - Completion function for flogi to an N_Port
* @vport: pointer to a host virtual N_Port data structure.
@@ -815,9 +893,14 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
if (sp->cmn.fcphHigh < FC_PH3)
sp->cmn.fcphHigh = FC_PH3;
- if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ elsiocb->iocb.ulpCt_h = ((SLI4_CT_FCFI >> 1) & 1);
+ elsiocb->iocb.ulpCt_l = (SLI4_CT_FCFI & 1);
+ /* FLOGI needs to be 3 for WQE FCFI */
+ /* Set the fcfi to the fcfi we registered with */
+ elsiocb->iocb.ulpContext = phba->fcf.fcfi;
+ } else if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
sp->cmn.request_multiple_Nport = 1;
-
/* For FLOGI, Let FLOGI rsp set the NPortID for VPI 0 */
icmd->ulpCt_h = 1;
icmd->ulpCt_l = 0;
@@ -930,6 +1013,8 @@ lpfc_initial_flogi(struct lpfc_vport *vport)
if (!ndlp)
return 0;
lpfc_nlp_init(vport, ndlp, Fabric_DID);
+ /* Set the node type */
+ ndlp->nlp_type |= NLP_FABRIC;
/* Put ndlp onto node list */
lpfc_enqueue_node(vport, ndlp);
} else if (!NLP_CHK_NODE_ACT(ndlp)) {
@@ -1350,14 +1435,12 @@ lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry)
IOCB_t *icmd;
struct lpfc_nodelist *ndlp;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
int ret;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
ndlp = lpfc_findnode_did(vport, did);
if (ndlp && !NLP_CHK_NODE_ACT(ndlp))
@@ -1391,7 +1474,7 @@ lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry)
phba->fc_stat.elsXmitPLOGI++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_plogi;
- ret = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (ret == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
@@ -1501,14 +1584,9 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
PRLI *npr;
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
- struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
- psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
-
cmdsize = (sizeof(uint32_t) + sizeof(PRLI));
elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp,
ndlp->nlp_DID, ELS_CMD_PRLI);
@@ -1550,7 +1628,8 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_PRLI_SND;
spin_unlock_irq(shost->host_lock);
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_PRLI_SND;
spin_unlock_irq(shost->host_lock);
@@ -1608,7 +1687,8 @@ lpfc_adisc_done(struct lpfc_vport *vport)
* and continue discovery.
*/
if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
- !(vport->fc_flag & FC_RSCN_MODE)) {
+ !(vport->fc_flag & FC_RSCN_MODE) &&
+ (phba->sli_rev < LPFC_SLI_REV4)) {
lpfc_issue_reg_vpi(phba, vport);
return;
}
@@ -1788,8 +1868,6 @@ lpfc_issue_els_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
ADISC *ap;
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
uint8_t *pcmd;
uint16_t cmdsize;
@@ -1822,7 +1900,8 @@ lpfc_issue_els_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_ADISC_SND;
spin_unlock_irq(shost->host_lock);
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_ADISC_SND;
spin_unlock_irq(shost->host_lock);
@@ -1937,15 +2016,10 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
struct lpfc_hba *phba = vport->phba;
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
- struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
int rc;
- psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING];
-
spin_lock_irq(shost->host_lock);
if (ndlp->nlp_flag & NLP_LOGO_SND) {
spin_unlock_irq(shost->host_lock);
@@ -1978,7 +2052,7 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_LOGO_SND;
spin_unlock_irq(shost->host_lock);
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
spin_lock_irq(shost->host_lock);
@@ -2058,14 +2132,12 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
struct lpfc_hba *phba = vport->phba;
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
struct lpfc_nodelist *ndlp;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
cmdsize = (sizeof(uint32_t) + sizeof(SCR));
ndlp = lpfc_findnode_did(vport, nportid);
@@ -2108,7 +2180,8 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
phba->fc_stat.elsXmitSCR++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_cmd;
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
/* The additional lpfc_nlp_put will cause the following
* lpfc_els_free_iocb routine to trigger the rlease of
* the node.
@@ -2152,7 +2225,6 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
struct lpfc_hba *phba = vport->phba;
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
FARP *fp;
uint8_t *pcmd;
@@ -2162,7 +2234,6 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
struct lpfc_nodelist *ndlp;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
cmdsize = (sizeof(uint32_t) + sizeof(FARP));
ndlp = lpfc_findnode_did(vport, nportid);
@@ -2219,7 +2290,8 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
phba->fc_stat.elsXmitFARPR++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_cmd;
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
/* The additional lpfc_nlp_put will cause the following
* lpfc_els_free_iocb routine to trigger the release of
* the node.
@@ -2949,6 +3021,14 @@ lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
+ /*
+ * This routine is used to register and unregister in previous SLI
+ * modes.
+ */
+ if ((pmb->u.mb.mbxCommand == MBX_UNREG_LOGIN) &&
+ (phba->sli_rev == LPFC_SLI_REV4))
+ lpfc_sli4_free_rpi(phba, pmb->u.mb.un.varUnregLogin.rpi);
+
pmb->context1 = NULL;
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
@@ -2961,6 +3041,7 @@ lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
*/
lpfc_nlp_not_used(ndlp);
}
+
return;
}
@@ -3170,7 +3251,6 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag,
IOCB_t *icmd;
IOCB_t *oldcmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
@@ -3178,7 +3258,6 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag,
ELS_PKT *els_pkt_ptr;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
oldcmd = &oldiocb->iocb;
switch (flag) {
@@ -3266,7 +3345,7 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag,
}
phba->fc_stat.elsXmitACC++;
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 1;
@@ -3305,15 +3384,12 @@ lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError,
IOCB_t *icmd;
IOCB_t *oldcmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
int rc;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
-
cmdsize = 2 * sizeof(uint32_t);
elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
ndlp->nlp_DID, ELS_CMD_LS_RJT);
@@ -3346,7 +3422,7 @@ lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError,
phba->fc_stat.elsXmitLSRJT++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
@@ -3379,8 +3455,6 @@ lpfc_els_rsp_adisc_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
struct lpfc_nodelist *ndlp)
{
struct lpfc_hba *phba = vport->phba;
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
ADISC *ap;
IOCB_t *icmd, *oldcmd;
struct lpfc_iocbq *elsiocb;
@@ -3422,7 +3496,7 @@ lpfc_els_rsp_adisc_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
phba->fc_stat.elsXmitACC++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 1;
@@ -3459,14 +3533,12 @@ lpfc_els_rsp_prli_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
IOCB_t *icmd;
IOCB_t *oldcmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
int rc;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
cmdsize = sizeof(uint32_t) + sizeof(PRLI);
elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
@@ -3520,7 +3592,7 @@ lpfc_els_rsp_prli_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
phba->fc_stat.elsXmitACC++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 1;
@@ -3562,15 +3634,12 @@ lpfc_els_rsp_rnid_acc(struct lpfc_vport *vport, uint8_t format,
RNID *rn;
IOCB_t *icmd, *oldcmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
int rc;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING];
-
cmdsize = sizeof(uint32_t) + sizeof(uint32_t)
+ (2 * sizeof(struct lpfc_name));
if (format)
@@ -3626,7 +3695,7 @@ lpfc_els_rsp_rnid_acc(struct lpfc_vport *vport, uint8_t format,
elsiocb->context1 = NULL; /* Don't need ndlp for cmpl,
* it could be freed */
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 1;
@@ -3839,7 +3908,9 @@ lpfc_rscn_payload_check(struct lpfc_vport *vport, uint32_t did)
payload_len -= sizeof(uint32_t);
switch (rscn_did.un.b.resv & RSCN_ADDRESS_FORMAT_MASK) {
case RSCN_ADDRESS_FORMAT_PORT:
- if (ns_did.un.word == rscn_did.un.word)
+ if ((ns_did.un.b.domain == rscn_did.un.b.domain)
+ && (ns_did.un.b.area == rscn_did.un.b.area)
+ && (ns_did.un.b.id == rscn_did.un.b.id))
goto return_did_out;
break;
case RSCN_ADDRESS_FORMAT_AREA:
@@ -4300,7 +4371,7 @@ lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
lpfc_init_link(phba, mbox,
phba->cfg_topology,
phba->cfg_link_speed);
- mbox->mb.un.varInitLnk.lipsr_AL_PA = 0;
+ mbox->u.mb.un.varInitLnk.lipsr_AL_PA = 0;
mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
mbox->vport = vport;
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
@@ -4440,8 +4511,6 @@ lpfc_els_rcv_lirr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
static void
lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
MAILBOX_t *mb;
IOCB_t *icmd;
RPS_RSP *rps_rsp;
@@ -4451,7 +4520,7 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
uint16_t xri, status;
uint32_t cmdsize;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
ndlp = (struct lpfc_nodelist *) pmb->context2;
xri = (uint16_t) ((unsigned long)(pmb->context1));
@@ -4507,7 +4576,7 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
ndlp->nlp_rpi);
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
phba->fc_stat.elsXmitACC++;
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR)
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) == IOCB_ERROR)
lpfc_els_free_iocb(phba, elsiocb);
return;
}
@@ -4616,8 +4685,6 @@ lpfc_els_rsp_rpl_acc(struct lpfc_vport *vport, uint16_t cmdsize,
IOCB_t *icmd, *oldcmd;
RPL_RSP rpl_rsp;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
uint8_t *pcmd;
elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
@@ -4654,7 +4721,8 @@ lpfc_els_rsp_rpl_acc(struct lpfc_vport *vport, uint16_t cmdsize,
ndlp->nlp_rpi);
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
phba->fc_stat.elsXmitACC++;
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 1;
}
@@ -4883,7 +4951,10 @@ lpfc_els_rcv_fan(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
} else {
/* FAN verified - skip FLOGI */
vport->fc_myDID = vport->fc_prevDID;
- lpfc_issue_fabric_reglogin(vport);
+ if (phba->sli_rev < LPFC_SLI_REV4)
+ lpfc_issue_fabric_reglogin(vport);
+ else
+ lpfc_issue_reg_vfi(vport);
}
}
return 0;
@@ -5566,11 +5637,10 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
dropit:
if (vport && !(vport->load_flag & FC_UNLOADING))
- lpfc_printf_log(phba, KERN_ERR, LOG_ELS,
- "(%d):0111 Dropping received ELS cmd "
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+ "0111 Dropping received ELS cmd "
"Data: x%x x%x x%x\n",
- vport->vpi, icmd->ulpStatus,
- icmd->un.ulpWord[4], icmd->ulpTimeout);
+ icmd->ulpStatus, icmd->un.ulpWord[4], icmd->ulpTimeout);
phba->fc_stat.elsRcvDrop++;
}
@@ -5646,10 +5716,9 @@ lpfc_els_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
icmd->ulpCommand == CMD_IOCB_RCV_SEQ64_CX)) {
if (icmd->unsli3.rcvsli3.vpi == 0xffff)
vport = phba->pport;
- else {
- uint16_t vpi = icmd->unsli3.rcvsli3.vpi;
- vport = lpfc_find_vport_by_vpid(phba, vpi);
- }
+ else
+ vport = lpfc_find_vport_by_vpid(phba,
+ icmd->unsli3.rcvsli3.vpi - phba->vpi_base);
}
/* If there are no BDEs associated
* with this IOCB, there is nothing to do.
@@ -5781,7 +5850,7 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
struct lpfc_vport *vport = pmb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI;
@@ -5818,7 +5887,10 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
} else {
if (vport == phba->pport)
- lpfc_issue_fabric_reglogin(vport);
+ if (phba->sli_rev < LPFC_SLI_REV4)
+ lpfc_issue_fabric_reglogin(vport);
+ else
+ lpfc_issue_reg_vfi(vport);
else
lpfc_do_scr_ns_plogi(phba, vport);
}
@@ -5850,7 +5922,7 @@ lpfc_register_new_vport(struct lpfc_hba *phba, struct lpfc_vport *vport,
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (mbox) {
- lpfc_reg_vpi(phba, vport->vpi, vport->fc_myDID, mbox);
+ lpfc_reg_vpi(vport, mbox);
mbox->vport = vport;
mbox->context2 = lpfc_nlp_get(ndlp);
mbox->mbox_cmpl = lpfc_cmpl_reg_new_vport;
@@ -6139,7 +6211,6 @@ lpfc_issue_els_npiv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_hba *phba = vport->phba;
- struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
uint8_t *pcmd;
@@ -6169,7 +6240,8 @@ lpfc_issue_els_npiv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_LOGO_SND;
spin_unlock_irq(shost->host_lock);
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_LOGO_SND;
spin_unlock_irq(shost->host_lock);
@@ -6224,7 +6296,6 @@ lpfc_resume_fabric_iocbs(struct lpfc_hba *phba)
struct lpfc_iocbq *iocb;
unsigned long iflags;
int ret;
- struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
IOCB_t *cmd;
repeat:
@@ -6248,7 +6319,7 @@ repeat:
"Fabric sched1: ste:x%x",
iocb->vport->port_state, 0, 0);
- ret = lpfc_sli_issue_iocb(phba, pring, iocb, 0);
+ ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, iocb, 0);
if (ret == IOCB_ERROR) {
iocb->iocb_cmpl = iocb->fabric_iocb_cmpl;
@@ -6394,7 +6465,6 @@ static int
lpfc_issue_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *iocb)
{
unsigned long iflags;
- struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
int ready;
int ret;
@@ -6418,7 +6488,7 @@ lpfc_issue_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *iocb)
"Fabric sched2: ste:x%x",
iocb->vport->port_state, 0, 0);
- ret = lpfc_sli_issue_iocb(phba, pring, iocb, 0);
+ ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, iocb, 0);
if (ret == IOCB_ERROR) {
iocb->iocb_cmpl = iocb->fabric_iocb_cmpl;
@@ -6524,3 +6594,38 @@ void lpfc_fabric_abort_hba(struct lpfc_hba *phba)
lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
IOERR_SLI_ABORTED);
}
+
+/**
+ * lpfc_sli4_els_xri_aborted - Slow-path process of els xri abort
+ * @phba: pointer to lpfc hba data structure.
+ * @axri: pointer to the els xri abort wcqe structure.
+ *
+ * This routine is invoked by the worker thread to process a SLI4 slow-path
+ * ELS aborted xri.
+ **/
+void
+lpfc_sli4_els_xri_aborted(struct lpfc_hba *phba,
+ struct sli4_wcqe_xri_aborted *axri)
+{
+ uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
+ struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
+ unsigned long iflag = 0;
+
+ spin_lock_irqsave(&phba->sli4_hba.abts_sgl_list_lock, iflag);
+ list_for_each_entry_safe(sglq_entry, sglq_next,
+ &phba->sli4_hba.lpfc_abts_els_sgl_list, list) {
+ if (sglq_entry->sli4_xritag == xri) {
+ list_del(&sglq_entry->list);
+ spin_unlock_irqrestore(
+ &phba->sli4_hba.abts_sgl_list_lock,
+ iflag);
+ spin_lock_irqsave(&phba->hbalock, iflag);
+
+ list_add_tail(&sglq_entry->list,
+ &phba->sli4_hba.lpfc_sgl_list);
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ return;
+ }
+ }
+ spin_unlock_irqrestore(&phba->sli4_hba.abts_sgl_list_lock, iflag);
+}
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index e764ce0..35c41ae 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -29,10 +29,12 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_scsi.h"
#include "lpfc.h"
#include "lpfc_logmsg.h"
@@ -273,6 +275,8 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp)
!(ndlp->nlp_flag & NLP_NPR_2B_DISC) &&
(ndlp->nlp_state != NLP_STE_UNMAPPED_NODE))
lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RM);
+
+ lpfc_unregister_unused_fcf(phba);
}
/**
@@ -295,10 +299,11 @@ lpfc_alloc_fast_evt(struct lpfc_hba *phba) {
ret = kzalloc(sizeof(struct lpfc_fast_path_event),
GFP_ATOMIC);
- if (ret)
+ if (ret) {
atomic_inc(&phba->fast_event_count);
- INIT_LIST_HEAD(&ret->work_evt.evt_listp);
- ret->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT;
+ INIT_LIST_HEAD(&ret->work_evt.evt_listp);
+ ret->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT;
+ }
return ret;
}
@@ -491,6 +496,10 @@ lpfc_work_done(struct lpfc_hba *phba)
phba->work_ha = 0;
spin_unlock_irq(&phba->hbalock);
+ /* First, try to post the next mailbox command to SLI4 device */
+ if (phba->pci_dev_grp == LPFC_PCI_DEV_OC)
+ lpfc_sli4_post_async_mbox(phba);
+
if (ha_copy & HA_ERATT)
/* Handle the error attention event */
lpfc_handle_eratt(phba);
@@ -501,9 +510,27 @@ lpfc_work_done(struct lpfc_hba *phba)
if (ha_copy & HA_LATT)
lpfc_handle_latt(phba);
+ /* Process SLI4 events */
+ if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) {
+ if (phba->hba_flag & FCP_XRI_ABORT_EVENT)
+ lpfc_sli4_fcp_xri_abort_event_proc(phba);
+ if (phba->hba_flag & ELS_XRI_ABORT_EVENT)
+ lpfc_sli4_els_xri_abort_event_proc(phba);
+ if (phba->hba_flag & ASYNC_EVENT)
+ lpfc_sli4_async_event_proc(phba);
+ if (phba->hba_flag & HBA_POST_RECEIVE_BUFFER) {
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~HBA_POST_RECEIVE_BUFFER;
+ spin_unlock_irq(&phba->hbalock);
+ lpfc_sli_hbqbuf_add_hbqs(phba, LPFC_ELS_HBQ);
+ }
+ if (phba->hba_flag & HBA_RECEIVE_BUFFER)
+ lpfc_sli4_handle_received_buffer(phba);
+ }
+
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi; i++) {
+ for (i = 0; i <= phba->max_vports; i++) {
/*
* We could have no vports in array if unloading, so if
* this happens then just use the pport
@@ -555,23 +582,24 @@ lpfc_work_done(struct lpfc_hba *phba)
/*
* Turn on Ring interrupts
*/
- spin_lock_irq(&phba->hbalock);
- control = readl(phba->HCregaddr);
- if (!(control & (HC_R0INT_ENA << LPFC_ELS_RING))) {
- lpfc_debugfs_slow_ring_trc(phba,
- "WRK Enable ring: cntl:x%x hacopy:x%x",
- control, ha_copy, 0);
-
- control |= (HC_R0INT_ENA << LPFC_ELS_RING);
- writel(control, phba->HCregaddr);
- readl(phba->HCregaddr); /* flush */
- }
- else {
- lpfc_debugfs_slow_ring_trc(phba,
- "WRK Ring ok: cntl:x%x hacopy:x%x",
- control, ha_copy, 0);
+ if (phba->sli_rev <= LPFC_SLI_REV3) {
+ spin_lock_irq(&phba->hbalock);
+ control = readl(phba->HCregaddr);
+ if (!(control & (HC_R0INT_ENA << LPFC_ELS_RING))) {
+ lpfc_debugfs_slow_ring_trc(phba,
+ "WRK Enable ring: cntl:x%x hacopy:x%x",
+ control, ha_copy, 0);
+
+ control |= (HC_R0INT_ENA << LPFC_ELS_RING);
+ writel(control, phba->HCregaddr);
+ readl(phba->HCregaddr); /* flush */
+ } else {
+ lpfc_debugfs_slow_ring_trc(phba,
+ "WRK Ring ok: cntl:x%x hacopy:x%x",
+ control, ha_copy, 0);
+ }
+ spin_unlock_irq(&phba->hbalock);
}
- spin_unlock_irq(&phba->hbalock);
}
lpfc_work_list_done(phba);
}
@@ -689,7 +717,7 @@ lpfc_port_link_failure(struct lpfc_vport *vport)
lpfc_can_disctmo(vport);
}
-static void
+void
lpfc_linkdown_port(struct lpfc_vport *vport)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
@@ -716,6 +744,7 @@ lpfc_linkdown(struct lpfc_hba *phba)
if (phba->link_state == LPFC_LINK_DOWN)
return 0;
spin_lock_irq(&phba->hbalock);
+ phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_DISCOVERED);
if (phba->link_state > LPFC_LINK_DOWN) {
phba->link_state = LPFC_LINK_DOWN;
phba->pport->fc_flag &= ~FC_LBIT;
@@ -723,7 +752,7 @@ lpfc_linkdown(struct lpfc_hba *phba)
spin_unlock_irq(&phba->hbalock);
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
/* Issue a LINK DOWN event to all nodes */
lpfc_linkdown_port(vports[i]);
}
@@ -833,10 +862,11 @@ lpfc_linkup(struct lpfc_hba *phba)
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++)
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
lpfc_linkup_port(vports[i]);
lpfc_destroy_vport_work_array(phba, vports);
- if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
+ if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
+ (phba->sli_rev < LPFC_SLI_REV4))
lpfc_issue_clear_la(phba, phba->pport);
return 0;
@@ -854,7 +884,7 @@ lpfc_mbx_cmpl_clear_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
struct lpfc_vport *vport = pmb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_sli *psli = &phba->sli;
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
uint32_t control;
/* Since we don't do discovery right now, turn these off here */
@@ -917,7 +947,7 @@ lpfc_mbx_cmpl_local_config_link(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
struct lpfc_vport *vport = pmb->vport;
- if (pmb->mb.mbxStatus)
+ if (pmb->u.mb.mbxStatus)
goto out;
mempool_free(pmb, phba->mbox_mem_pool);
@@ -945,7 +975,7 @@ out:
lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
"0306 CONFIG_LINK mbxStatus error x%x "
"HBA state x%x\n",
- pmb->mb.mbxStatus, vport->port_state);
+ pmb->u.mb.mbxStatus, vport->port_state);
mempool_free(pmb, phba->mbox_mem_pool);
lpfc_linkdown(phba);
@@ -959,9 +989,592 @@ out:
}
static void
+lpfc_mbx_cmpl_reg_fcfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+ struct lpfc_vport *vport = mboxq->vport;
+ unsigned long flags;
+
+ if (mboxq->u.mb.mbxStatus) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
+ "2017 REG_FCFI mbxStatus error x%x "
+ "HBA state x%x\n",
+ mboxq->u.mb.mbxStatus, vport->port_state);
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return;
+ }
+
+ /* Start FCoE discovery by sending a FLOGI. */
+ phba->fcf.fcfi = bf_get(lpfc_reg_fcfi_fcfi, &mboxq->u.mqe.un.reg_fcfi);
+ /* Set the FCFI registered flag */
+ spin_lock_irqsave(&phba->hbalock, flags);
+ phba->fcf.fcf_flag |= FCF_REGISTERED;
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ if (vport->port_state != LPFC_FLOGI) {
+ spin_lock_irqsave(&phba->hbalock, flags);
+ phba->fcf.fcf_flag |= (FCF_DISCOVERED | FCF_IN_USE);
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ lpfc_initial_flogi(vport);
+ }
+
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return;
+}
+
+/**
+ * lpfc_fab_name_match - Check if the fcf fabric name match.
+ * @fab_name: pointer to fabric name.
+ * @new_fcf_record: pointer to fcf record.
+ *
+ * This routine compare the fcf record's fabric name with provided
+ * fabric name. If the fabric name are identical this function
+ * returns 1 else return 0.
+ **/
+static uint32_t
+lpfc_fab_name_match(uint8_t *fab_name, struct fcf_record *new_fcf_record)
+{
+ if ((fab_name[0] ==
+ bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record)) &&
+ (fab_name[1] ==
+ bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record)) &&
+ (fab_name[2] ==
+ bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record)) &&
+ (fab_name[3] ==
+ bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record)) &&
+ (fab_name[4] ==
+ bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record)) &&
+ (fab_name[5] ==
+ bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record)) &&
+ (fab_name[6] ==
+ bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record)) &&
+ (fab_name[7] ==
+ bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record)))
+ return 1;
+ else
+ return 0;
+}
+
+/**
+ * lpfc_mac_addr_match - Check if the fcf mac address match.
+ * @phba: pointer to lpfc hba data structure.
+ * @new_fcf_record: pointer to fcf record.
+ *
+ * This routine compare the fcf record's mac address with HBA's
+ * FCF mac address. If the mac addresses are identical this function
+ * returns 1 else return 0.
+ **/
+static uint32_t
+lpfc_mac_addr_match(struct lpfc_hba *phba, struct fcf_record *new_fcf_record)
+{
+ if ((phba->fcf.mac_addr[0] ==
+ bf_get(lpfc_fcf_record_mac_0, new_fcf_record)) &&
+ (phba->fcf.mac_addr[1] ==
+ bf_get(lpfc_fcf_record_mac_1, new_fcf_record)) &&
+ (phba->fcf.mac_addr[2] ==
+ bf_get(lpfc_fcf_record_mac_2, new_fcf_record)) &&
+ (phba->fcf.mac_addr[3] ==
+ bf_get(lpfc_fcf_record_mac_3, new_fcf_record)) &&
+ (phba->fcf.mac_addr[4] ==
+ bf_get(lpfc_fcf_record_mac_4, new_fcf_record)) &&
+ (phba->fcf.mac_addr[5] ==
+ bf_get(lpfc_fcf_record_mac_5, new_fcf_record)))
+ return 1;
+ else
+ return 0;
+}
+
+/**
+ * lpfc_copy_fcf_record - Copy fcf information to lpfc_hba.
+ * @phba: pointer to lpfc hba data structure.
+ * @new_fcf_record: pointer to fcf record.
+ *
+ * This routine copies the FCF information from the FCF
+ * record to lpfc_hba data structure.
+ **/
+static void
+lpfc_copy_fcf_record(struct lpfc_hba *phba, struct fcf_record *new_fcf_record)
+{
+ phba->fcf.fabric_name[0] =
+ bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record);
+ phba->fcf.fabric_name[1] =
+ bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record);
+ phba->fcf.fabric_name[2] =
+ bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record);
+ phba->fcf.fabric_name[3] =
+ bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record);
+ phba->fcf.fabric_name[4] =
+ bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record);
+ phba->fcf.fabric_name[5] =
+ bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record);
+ phba->fcf.fabric_name[6] =
+ bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record);
+ phba->fcf.fabric_name[7] =
+ bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record);
+ phba->fcf.mac_addr[0] =
+ bf_get(lpfc_fcf_record_mac_0, new_fcf_record);
+ phba->fcf.mac_addr[1] =
+ bf_get(lpfc_fcf_record_mac_1, new_fcf_record);
+ phba->fcf.mac_addr[2] =
+ bf_get(lpfc_fcf_record_mac_2, new_fcf_record);
+ phba->fcf.mac_addr[3] =
+ bf_get(lpfc_fcf_record_mac_3, new_fcf_record);
+ phba->fcf.mac_addr[4] =
+ bf_get(lpfc_fcf_record_mac_4, new_fcf_record);
+ phba->fcf.mac_addr[5] =
+ bf_get(lpfc_fcf_record_mac_5, new_fcf_record);
+ phba->fcf.fcf_indx = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record);
+ phba->fcf.priority = new_fcf_record->fip_priority;
+}
+
+/**
+ * lpfc_register_fcf - Register the FCF with hba.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine issues a register fcfi mailbox command to register
+ * the fcf with HBA.
+ **/
+static void
+lpfc_register_fcf(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *fcf_mbxq;
+ int rc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&phba->hbalock, flags);
+
+ /* If the FCF is not availabe do nothing. */
+ if (!(phba->fcf.fcf_flag & FCF_AVAILABLE)) {
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ return;
+ }
+
+ /* The FCF is already registered, start discovery */
+ if (phba->fcf.fcf_flag & FCF_REGISTERED) {
+ phba->fcf.fcf_flag |= (FCF_DISCOVERED | FCF_IN_USE);
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ if (phba->pport->port_state != LPFC_FLOGI)
+ lpfc_initial_flogi(phba->pport);
+ return;
+ }
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+
+ fcf_mbxq = mempool_alloc(phba->mbox_mem_pool,
+ GFP_KERNEL);
+ if (!fcf_mbxq)
+ return;
+
+ lpfc_reg_fcfi(phba, fcf_mbxq);
+ fcf_mbxq->vport = phba->pport;
+ fcf_mbxq->mbox_cmpl = lpfc_mbx_cmpl_reg_fcfi;
+ rc = lpfc_sli_issue_mbox(phba, fcf_mbxq, MBX_NOWAIT);
+ if (rc == MBX_NOT_FINISHED)
+ mempool_free(fcf_mbxq, phba->mbox_mem_pool);
+
+ return;
+}
+
+/**
+ * lpfc_match_fcf_conn_list - Check if the FCF record can be used for discovery.
+ * @phba: pointer to lpfc hba data structure.
+ * @new_fcf_record: pointer to fcf record.
+ * @boot_flag: Indicates if this record used by boot bios.
+ * @addr_mode: The address mode to be used by this FCF
+ *
+ * This routine compare the fcf record with connect list obtained from the
+ * config region to decide if this FCF can be used for SAN discovery. It returns
+ * 1 if this record can be used for SAN discovery else return zero. If this FCF
+ * record can be used for SAN discovery, the boot_flag will indicate if this FCF
+ * is used by boot bios and addr_mode will indicate the addressing mode to be
+ * used for this FCF when the function returns.
+ * If the FCF record need to be used with a particular vlan id, the vlan is
+ * set in the vlan_id on return of the function. If not VLAN tagging need to
+ * be used with the FCF vlan_id will be set to 0xFFFF;
+ **/
+static int
+lpfc_match_fcf_conn_list(struct lpfc_hba *phba,
+ struct fcf_record *new_fcf_record,
+ uint32_t *boot_flag, uint32_t *addr_mode,
+ uint16_t *vlan_id)
+{
+ struct lpfc_fcf_conn_entry *conn_entry;
+
+ if (!phba->cfg_enable_fip) {
+ *boot_flag = 0;
+ *addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
+ new_fcf_record);
+ if (phba->valid_vlan)
+ *vlan_id = phba->vlan_id;
+ else
+ *vlan_id = 0xFFFF;
+ return 1;
+ }
+
+ /*
+ * If there are no FCF connection table entry, driver connect to all
+ * FCFs.
+ */
+ if (list_empty(&phba->fcf_conn_rec_list)) {
+ *boot_flag = 0;
+ *addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
+ new_fcf_record);
+ *vlan_id = 0xFFFF;
+ return 1;
+ }
+
+ list_for_each_entry(conn_entry, &phba->fcf_conn_rec_list, list) {
+ if (!(conn_entry->conn_rec.flags & FCFCNCT_VALID))
+ continue;
+
+ if ((conn_entry->conn_rec.flags & FCFCNCT_FBNM_VALID) &&
+ !lpfc_fab_name_match(conn_entry->conn_rec.fabric_name,
+ new_fcf_record))
+ continue;
+
+ if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID) {
+ /*
+ * If the vlan bit map does not have the bit set for the
+ * vlan id to be used, then it is not a match.
+ */
+ if (!(new_fcf_record->vlan_bitmap
+ [conn_entry->conn_rec.vlan_tag / 8] &
+ (1 << (conn_entry->conn_rec.vlan_tag % 8))))
+ continue;
+ }
+
+ /*
+ * Check if the connection record specifies a required
+ * addressing mode.
+ */
+ if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
+ !(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED)) {
+
+ /*
+ * If SPMA required but FCF not support this continue.
+ */
+ if ((conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
+ !(bf_get(lpfc_fcf_record_mac_addr_prov,
+ new_fcf_record) & LPFC_FCF_SPMA))
+ continue;
+
+ /*
+ * If FPMA required but FCF not support this continue.
+ */
+ if (!(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
+ !(bf_get(lpfc_fcf_record_mac_addr_prov,
+ new_fcf_record) & LPFC_FCF_FPMA))
+ continue;
+ }
+
+ /*
+ * This fcf record matches filtering criteria.
+ */
+ if (conn_entry->conn_rec.flags & FCFCNCT_BOOT)
+ *boot_flag = 1;
+ else
+ *boot_flag = 0;
+
+ *addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
+ new_fcf_record);
+ /*
+ * If the user specified a required address mode, assign that
+ * address mode
+ */
+ if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
+ (!(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED)))
+ *addr_mode = (conn_entry->conn_rec.flags &
+ FCFCNCT_AM_SPMA) ?
+ LPFC_FCF_SPMA : LPFC_FCF_FPMA;
+ /*
+ * If the user specified a prefered address mode, use the
+ * addr mode only if FCF support the addr_mode.
+ */
+ else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
+ (conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED) &&
+ (conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
+ (*addr_mode & LPFC_FCF_SPMA))
+ *addr_mode = LPFC_FCF_SPMA;
+ else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
+ (conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED) &&
+ !(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
+ (*addr_mode & LPFC_FCF_FPMA))
+ *addr_mode = LPFC_FCF_FPMA;
+ /*
+ * If user did not specify any addressing mode, use FPMA if
+ * possible else use SPMA.
+ */
+ else if (*addr_mode & LPFC_FCF_FPMA)
+ *addr_mode = LPFC_FCF_FPMA;
+
+ if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID)
+ *vlan_id = conn_entry->conn_rec.vlan_tag;
+ else
+ *vlan_id = 0xFFFF;
+
+ return 1;
+ }
+
+ return 0;
+}
+
+/**
+ * lpfc_mbx_cmpl_read_fcf_record - Completion handler for read_fcf mbox.
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to mailbox object.
+ *
+ * This function iterate through all the fcf records available in
+ * HBA and choose the optimal FCF record for discovery. After finding
+ * the FCF for discovery it register the FCF record and kick start
+ * discovery.
+ * If FCF_IN_USE flag is set in currently used FCF, the routine try to
+ * use a FCF record which match fabric name and mac address of the
+ * currently used FCF record.
+ * If the driver support only one FCF, it will try to use the FCF record
+ * used by BOOT_BIOS.
+ */
+void
+lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+ void *virt_addr;
+ dma_addr_t phys_addr;
+ uint8_t *bytep;
+ struct lpfc_mbx_sge sge;
+ struct lpfc_mbx_read_fcf_tbl *read_fcf;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+ struct fcf_record *new_fcf_record;
+ int rc;
+ uint32_t boot_flag, addr_mode;
+ uint32_t next_fcf_index;
+ unsigned long flags;
+ uint16_t vlan_id;
+
+ /* Get the first SGE entry from the non-embedded DMA memory. This
+ * routine only uses a single SGE.
+ */
+ lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
+ phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
+ if (unlikely(!mboxq->sge_array)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+ "2524 Failed to get the non-embedded SGE "
+ "virtual address\n");
+ goto out;
+ }
+ virt_addr = mboxq->sge_array->addr[0];
+
+ shdr = (union lpfc_sli4_cfg_shdr *)virt_addr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+ &shdr->response);
+ /*
+ * The FCF Record was read and there is no reason for the driver
+ * to maintain the FCF record data or memory. Instead, just need
+ * to book keeping the FCFIs can be used.
+ */
+ if (shdr_status || shdr_add_status) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2521 READ_FCF_RECORD mailbox failed "
+ "with status x%x add_status x%x, mbx\n",
+ shdr_status, shdr_add_status);
+ goto out;
+ }
+ /* Interpreting the returned information of FCF records */
+ read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr;
+ lpfc_sli_pcimem_bcopy(read_fcf, read_fcf,
+ sizeof(struct lpfc_mbx_read_fcf_tbl));
+ next_fcf_index = bf_get(lpfc_mbx_read_fcf_tbl_nxt_vindx, read_fcf);
+
+ new_fcf_record = (struct fcf_record *)(virt_addr +
+ sizeof(struct lpfc_mbx_read_fcf_tbl));
+ lpfc_sli_pcimem_bcopy(new_fcf_record, new_fcf_record,
+ sizeof(struct fcf_record));
+ bytep = virt_addr + sizeof(union lpfc_sli4_cfg_shdr);
+
+ rc = lpfc_match_fcf_conn_list(phba, new_fcf_record,
+ &boot_flag, &addr_mode,
+ &vlan_id);
+ /*
+ * If the fcf record does not match with connect list entries
+ * read the next entry.
+ */
+ if (!rc)
+ goto read_next_fcf;
+ /*
+ * If this is not the first FCF discovery of the HBA, use last
+ * FCF record for the discovery.
+ */
+ spin_lock_irqsave(&phba->hbalock, flags);
+ if (phba->fcf.fcf_flag & FCF_IN_USE) {
+ if (lpfc_fab_name_match(phba->fcf.fabric_name,
+ new_fcf_record) &&
+ lpfc_mac_addr_match(phba, new_fcf_record)) {
+ phba->fcf.fcf_flag |= FCF_AVAILABLE;
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ goto out;
+ }
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ goto read_next_fcf;
+ }
+ if (phba->fcf.fcf_flag & FCF_AVAILABLE) {
+ /*
+ * If the current FCF record does not have boot flag
+ * set and new fcf record has boot flag set, use the
+ * new fcf record.
+ */
+ if (boot_flag && !(phba->fcf.fcf_flag & FCF_BOOT_ENABLE)) {
+ /* Use this FCF record */
+ lpfc_copy_fcf_record(phba, new_fcf_record);
+ phba->fcf.addr_mode = addr_mode;
+ phba->fcf.fcf_flag |= FCF_BOOT_ENABLE;
+ if (vlan_id != 0xFFFF) {
+ phba->fcf.fcf_flag |= FCF_VALID_VLAN;
+ phba->fcf.vlan_id = vlan_id;
+ }
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ goto read_next_fcf;
+ }
+ /*
+ * If the current FCF record has boot flag set and the
+ * new FCF record does not have boot flag, read the next
+ * FCF record.
+ */
+ if (!boot_flag && (phba->fcf.fcf_flag & FCF_BOOT_ENABLE)) {
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ goto read_next_fcf;
+ }
+ /*
+ * If there is a record with lower priority value for
+ * the current FCF, use that record.
+ */
+ if (lpfc_fab_name_match(phba->fcf.fabric_name, new_fcf_record)
+ && (new_fcf_record->fip_priority <
+ phba->fcf.priority)) {
+ /* Use this FCF record */
+ lpfc_copy_fcf_record(phba, new_fcf_record);
+ phba->fcf.addr_mode = addr_mode;
+ if (vlan_id != 0xFFFF) {
+ phba->fcf.fcf_flag |= FCF_VALID_VLAN;
+ phba->fcf.vlan_id = vlan_id;
+ }
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ goto read_next_fcf;
+ }
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ goto read_next_fcf;
+ }
+ /*
+ * This is the first available FCF record, use this
+ * record.
+ */
+ lpfc_copy_fcf_record(phba, new_fcf_record);
+ phba->fcf.addr_mode = addr_mode;
+ if (boot_flag)
+ phba->fcf.fcf_flag |= FCF_BOOT_ENABLE;
+ phba->fcf.fcf_flag |= FCF_AVAILABLE;
+ if (vlan_id != 0xFFFF) {
+ phba->fcf.fcf_flag |= FCF_VALID_VLAN;
+ phba->fcf.vlan_id = vlan_id;
+ }
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ goto read_next_fcf;
+
+read_next_fcf:
+ lpfc_sli4_mbox_cmd_free(phba, mboxq);
+ if (next_fcf_index == LPFC_FCOE_FCF_NEXT_NONE || next_fcf_index == 0)
+ lpfc_register_fcf(phba);
+ else
+ lpfc_sli4_read_fcf_record(phba, next_fcf_index);
+ return;
+
+out:
+ lpfc_sli4_mbox_cmd_free(phba, mboxq);
+ lpfc_register_fcf(phba);
+
+ return;
+}
+
+/**
+ * lpfc_start_fdiscs - send fdiscs for each vports on this port.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This function loops through the list of vports on the @phba and issues an
+ * FDISC if possible.
+ */
+void
+lpfc_start_fdiscs(struct lpfc_hba *phba)
+{
+ struct lpfc_vport **vports;
+ int i;
+
+ vports = lpfc_create_vport_work_array(phba);
+ if (vports != NULL) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
+ if (vports[i]->port_type == LPFC_PHYSICAL_PORT)
+ continue;
+ /* There are no vpi for this vport */
+ if (vports[i]->vpi > phba->max_vpi) {
+ lpfc_vport_set_state(vports[i],
+ FC_VPORT_FAILED);
+ continue;
+ }
+ if (phba->fc_topology == TOPOLOGY_LOOP) {
+ lpfc_vport_set_state(vports[i],
+ FC_VPORT_LINKDOWN);
+ continue;
+ }
+ if (phba->link_flag & LS_NPIV_FAB_SUPPORTED)
+ lpfc_initial_fdisc(vports[i]);
+ else {
+ lpfc_vport_set_state(vports[i],
+ FC_VPORT_NO_FABRIC_SUPP);
+ lpfc_printf_vlog(vports[i], KERN_ERR,
+ LOG_ELS,
+ "0259 No NPIV "
+ "Fabric support\n");
+ }
+ }
+ }
+ lpfc_destroy_vport_work_array(phba, vports);
+}
+
+void
+lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+ struct lpfc_dmabuf *dmabuf = mboxq->context1;
+ struct lpfc_vport *vport = mboxq->vport;
+
+ if (mboxq->u.mb.mbxStatus) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
+ "2018 REG_VFI mbxStatus error x%x "
+ "HBA state x%x\n",
+ mboxq->u.mb.mbxStatus, vport->port_state);
+ if (phba->fc_topology == TOPOLOGY_LOOP) {
+ /* FLOGI failed, use loop map to make discovery list */
+ lpfc_disc_list_loopmap(vport);
+ /* Start discovery */
+ lpfc_disc_start(vport);
+ goto fail_free_mem;
+ }
+ lpfc_vport_set_state(vport, FC_VPORT_FAILED);
+ goto fail_free_mem;
+ }
+ /* Mark the vport has registered with its VFI */
+ vport->vfi_state |= LPFC_VFI_REGISTERED;
+
+ if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
+ lpfc_start_fdiscs(phba);
+ lpfc_do_scr_ns_plogi(phba, vport);
+ }
+
+fail_free_mem:
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ lpfc_mbuf_free(phba, dmabuf->virt, dmabuf->phys);
+ kfree(dmabuf);
+ return;
+}
+
+static void
lpfc_mbx_cmpl_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) pmb->context1;
struct lpfc_vport *vport = pmb->vport;
@@ -1012,13 +1625,13 @@ static void
lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
{
struct lpfc_vport *vport = phba->pport;
- LPFC_MBOXQ_t *sparam_mbox, *cfglink_mbox;
+ LPFC_MBOXQ_t *sparam_mbox, *cfglink_mbox = NULL;
int i;
struct lpfc_dmabuf *mp;
int rc;
+ struct fcf_record *fcf_record;
sparam_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- cfglink_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
spin_lock_irq(&phba->hbalock);
switch (la->UlnkSpeed) {
@@ -1034,6 +1647,9 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
case LA_8GHZ_LINK:
phba->fc_linkspeed = LA_8GHZ_LINK;
break;
+ case LA_10GHZ_LINK:
+ phba->fc_linkspeed = LA_10GHZ_LINK;
+ break;
default:
phba->fc_linkspeed = LA_UNKNW_LINK;
break;
@@ -1115,22 +1731,66 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
mempool_free(sparam_mbox, phba->mbox_mem_pool);
- if (cfglink_mbox)
- mempool_free(cfglink_mbox, phba->mbox_mem_pool);
goto out;
}
}
- if (cfglink_mbox) {
+ if (!(phba->hba_flag & HBA_FCOE_SUPPORT)) {
+ cfglink_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!cfglink_mbox)
+ goto out;
vport->port_state = LPFC_LOCAL_CFG_LINK;
lpfc_config_link(phba, cfglink_mbox);
cfglink_mbox->vport = vport;
cfglink_mbox->mbox_cmpl = lpfc_mbx_cmpl_local_config_link;
rc = lpfc_sli_issue_mbox(phba, cfglink_mbox, MBX_NOWAIT);
- if (rc != MBX_NOT_FINISHED)
- return;
- mempool_free(cfglink_mbox, phba->mbox_mem_pool);
+ if (rc == MBX_NOT_FINISHED) {
+ mempool_free(cfglink_mbox, phba->mbox_mem_pool);
+ goto out;
+ }
+ } else {
+ /*
+ * Add the driver's default FCF record at FCF index 0 now. This
+ * is phase 1 implementation that support FCF index 0 and driver
+ * defaults.
+ */
+ if (phba->cfg_enable_fip == 0) {
+ fcf_record = kzalloc(sizeof(struct fcf_record),
+ GFP_KERNEL);
+ if (unlikely(!fcf_record)) {
+ lpfc_printf_log(phba, KERN_ERR,
+ LOG_MBOX | LOG_SLI,
+ "2554 Could not allocate memmory for "
+ "fcf record\n");
+ rc = -ENODEV;
+ goto out;
+ }
+
+ lpfc_sli4_build_dflt_fcf_record(phba, fcf_record,
+ LPFC_FCOE_FCF_DEF_INDEX);
+ rc = lpfc_sli4_add_fcf_record(phba, fcf_record);
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_ERR,
+ LOG_MBOX | LOG_SLI,
+ "2013 Could not manually add FCF "
+ "record 0, status %d\n", rc);
+ rc = -ENODEV;
+ kfree(fcf_record);
+ goto out;
+ }
+ kfree(fcf_record);
+ }
+ /*
+ * The driver is expected to do FIP/FCF. Call the port
+ * and get the FCF Table.
+ */
+ rc = lpfc_sli4_read_fcf_record(phba,
+ LPFC_FCOE_FCF_GET_FIRST);
+ if (rc)
+ goto out;
}
+
+ return;
out:
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
@@ -1147,10 +1807,12 @@ lpfc_enable_la(struct lpfc_hba *phba)
struct lpfc_sli *psli = &phba->sli;
spin_lock_irq(&phba->hbalock);
psli->sli_flag |= LPFC_PROCESS_LA;
- control = readl(phba->HCregaddr);
- control |= HC_LAINT_ENA;
- writel(control, phba->HCregaddr);
- readl(phba->HCregaddr); /* flush */
+ if (phba->sli_rev <= LPFC_SLI_REV3) {
+ control = readl(phba->HCregaddr);
+ control |= HC_LAINT_ENA;
+ writel(control, phba->HCregaddr);
+ readl(phba->HCregaddr); /* flush */
+ }
spin_unlock_irq(&phba->hbalock);
}
@@ -1159,6 +1821,7 @@ lpfc_mbx_issue_link_down(struct lpfc_hba *phba)
{
lpfc_linkdown(phba);
lpfc_enable_la(phba);
+ lpfc_unregister_unused_fcf(phba);
/* turn on Link Attention interrupts - no CLEAR_LA needed */
}
@@ -1175,7 +1838,7 @@ lpfc_mbx_cmpl_read_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
struct lpfc_vport *vport = pmb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
READ_LA_VAR *la;
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
/* Unblock ELS traffic */
@@ -1190,7 +1853,7 @@ lpfc_mbx_cmpl_read_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
goto lpfc_mbx_cmpl_read_la_free_mbuf;
}
- la = (READ_LA_VAR *) & pmb->mb.un.varReadLA;
+ la = (READ_LA_VAR *) &pmb->u.mb.un.varReadLA;
memcpy(&phba->alpa_map[0], mp->virt, 128);
@@ -1328,7 +1991,7 @@ lpfc_mbx_cmpl_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
static void
lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
struct lpfc_vport *vport = pmb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
@@ -1381,7 +2044,7 @@ lpfc_mbx_cmpl_reg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
struct lpfc_vport *vport = pmb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
switch (mb->mbxStatus) {
case 0x0011:
@@ -1416,6 +2079,128 @@ out:
return;
}
+/**
+ * lpfc_create_static_vport - Read HBA config region to create static vports.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine issue a DUMP mailbox command for config region 22 to get
+ * the list of static vports to be created. The function create vports
+ * based on the information returned from the HBA.
+ **/
+void
+lpfc_create_static_vport(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *pmb = NULL;
+ MAILBOX_t *mb;
+ struct static_vport_info *vport_info;
+ int rc, i;
+ struct fc_vport_identifiers vport_id;
+ struct fc_vport *new_fc_vport;
+ struct Scsi_Host *shost;
+ struct lpfc_vport *vport;
+ uint16_t offset = 0;
+ uint8_t *vport_buff;
+
+ pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!pmb) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0542 lpfc_create_static_vport failed to"
+ " allocate mailbox memory\n");
+ return;
+ }
+
+ mb = &pmb->u.mb;
+
+ vport_info = kzalloc(sizeof(struct static_vport_info), GFP_KERNEL);
+ if (!vport_info) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0543 lpfc_create_static_vport failed to"
+ " allocate vport_info\n");
+ mempool_free(pmb, phba->mbox_mem_pool);
+ return;
+ }
+
+ vport_buff = (uint8_t *) vport_info;
+ do {
+ lpfc_dump_static_vport(phba, pmb, offset);
+ pmb->vport = phba->pport;
+ rc = lpfc_sli_issue_mbox_wait(phba, pmb, LPFC_MBOX_TMO);
+
+ if ((rc != MBX_SUCCESS) || mb->mbxStatus) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "0544 lpfc_create_static_vport failed to"
+ " issue dump mailbox command ret 0x%x "
+ "status 0x%x\n",
+ rc, mb->mbxStatus);
+ goto out;
+ }
+
+ if (mb->un.varDmp.word_cnt >
+ sizeof(struct static_vport_info) - offset)
+ mb->un.varDmp.word_cnt =
+ sizeof(struct static_vport_info) - offset;
+
+ lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET,
+ vport_buff + offset,
+ mb->un.varDmp.word_cnt);
+ offset += mb->un.varDmp.word_cnt;
+
+ } while (mb->un.varDmp.word_cnt &&
+ offset < sizeof(struct static_vport_info));
+
+
+ if ((le32_to_cpu(vport_info->signature) != VPORT_INFO_SIG) ||
+ ((le32_to_cpu(vport_info->rev) & VPORT_INFO_REV_MASK)
+ != VPORT_INFO_REV)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0545 lpfc_create_static_vport bad"
+ " information header 0x%x 0x%x\n",
+ le32_to_cpu(vport_info->signature),
+ le32_to_cpu(vport_info->rev) & VPORT_INFO_REV_MASK);
+
+ goto out;
+ }
+
+ shost = lpfc_shost_from_vport(phba->pport);
+
+ for (i = 0; i < MAX_STATIC_VPORT_COUNT; i++) {
+ memset(&vport_id, 0, sizeof(vport_id));
+ vport_id.port_name = wwn_to_u64(vport_info->vport_list[i].wwpn);
+ vport_id.node_name = wwn_to_u64(vport_info->vport_list[i].wwnn);
+ if (!vport_id.port_name || !vport_id.node_name)
+ continue;
+
+ vport_id.roles = FC_PORT_ROLE_FCP_INITIATOR;
+ vport_id.vport_type = FC_PORTTYPE_NPIV;
+ vport_id.disable = false;
+ new_fc_vport = fc_vport_create(shost, 0, &vport_id);
+
+ if (!new_fc_vport) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "0546 lpfc_create_static_vport failed to"
+ " create vport \n");
+ continue;
+ }
+
+ vport = *(struct lpfc_vport **)new_fc_vport->dd_data;
+ vport->vport_flag |= STATIC_VPORT;
+ }
+
+out:
+ /*
+ * If this is timed out command, setting NULL to context2 tell SLI
+ * layer not to use this buffer.
+ */
+ spin_lock_irq(&phba->hbalock);
+ pmb->context2 = NULL;
+ spin_unlock_irq(&phba->hbalock);
+ kfree(vport_info);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(pmb, phba->mbox_mem_pool);
+
+ return;
+}
+
/*
* This routine handles processing a Fabric REG_LOGIN mailbox
* command upon completion. It is setup in the LPFC_MBOXQ
@@ -1426,16 +2211,17 @@ void
lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
struct lpfc_vport *vport = pmb->vport;
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
struct lpfc_nodelist *ndlp;
- struct lpfc_vport **vports;
- int i;
ndlp = (struct lpfc_nodelist *) pmb->context2;
pmb->context1 = NULL;
pmb->context2 = NULL;
if (mb->mbxStatus) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
+ "0258 Register Fabric login error: 0x%x\n",
+ mb->mbxStatus);
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
mempool_free(pmb, phba->mbox_mem_pool);
@@ -1454,9 +2240,6 @@ lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
}
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
- lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
- "0258 Register Fabric login error: 0x%x\n",
- mb->mbxStatus);
/* Decrement the reference count to ndlp after the reference
* to the ndlp are done.
*/
@@ -1465,34 +2248,12 @@ lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
}
ndlp->nlp_rpi = mb->un.varWords[0];
+ ndlp->nlp_flag |= NLP_RPI_VALID;
ndlp->nlp_type |= NLP_FABRIC;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
- vports = lpfc_create_vport_work_array(phba);
- if (vports != NULL)
- for(i = 0;
- i <= phba->max_vpi && vports[i] != NULL;
- i++) {
- if (vports[i]->port_type == LPFC_PHYSICAL_PORT)
- continue;
- if (phba->fc_topology == TOPOLOGY_LOOP) {
- lpfc_vport_set_state(vports[i],
- FC_VPORT_LINKDOWN);
- continue;
- }
- if (phba->link_flag & LS_NPIV_FAB_SUPPORTED)
- lpfc_initial_fdisc(vports[i]);
- else {
- lpfc_vport_set_state(vports[i],
- FC_VPORT_NO_FABRIC_SUPP);
- lpfc_printf_vlog(vport, KERN_ERR,
- LOG_ELS,
- "0259 No NPIV "
- "Fabric support\n");
- }
- }
- lpfc_destroy_vport_work_array(phba, vports);
+ lpfc_start_fdiscs(phba);
lpfc_do_scr_ns_plogi(phba, vport);
}
@@ -1516,13 +2277,16 @@ lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
void
lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
struct lpfc_vport *vport = pmb->vport;
if (mb->mbxStatus) {
out:
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+ "0260 Register NameServer error: 0x%x\n",
+ mb->mbxStatus);
/* decrement the node reference count held for this
* callback function.
*/
@@ -1546,15 +2310,13 @@ out:
return;
}
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
- lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
- "0260 Register NameServer error: 0x%x\n",
- mb->mbxStatus);
return;
}
pmb->context1 = NULL;
ndlp->nlp_rpi = mb->un.varWords[0];
+ ndlp->nlp_flag |= NLP_RPI_VALID;
ndlp->nlp_type |= NLP_FABRIC;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
@@ -2055,7 +2817,7 @@ lpfc_check_sli_ndlp(struct lpfc_hba *phba,
if (pring->ringno == LPFC_ELS_RING) {
switch (icmd->ulpCommand) {
case CMD_GEN_REQUEST64_CR:
- if (icmd->ulpContext == (volatile ushort)ndlp->nlp_rpi)
+ if (iocb->context_un.ndlp == ndlp)
return 1;
case CMD_ELS_REQUEST64_CR:
if (icmd->un.elsreq64.remoteID == ndlp->nlp_DID)
@@ -2102,7 +2864,7 @@ lpfc_no_rpi(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
*/
psli = &phba->sli;
rpi = ndlp->nlp_rpi;
- if (rpi) {
+ if (ndlp->nlp_flag & NLP_RPI_VALID) {
/* Now process each ring */
for (i = 0; i < psli->num_rings; i++) {
pring = &psli->ring[i];
@@ -2150,7 +2912,7 @@ lpfc_unreg_rpi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
LPFC_MBOXQ_t *mbox;
int rc;
- if (ndlp->nlp_rpi) {
+ if (ndlp->nlp_flag & NLP_RPI_VALID) {
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (mbox) {
lpfc_unreg_login(phba, vport->vpi, ndlp->nlp_rpi, mbox);
@@ -2162,6 +2924,7 @@ lpfc_unreg_rpi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
}
lpfc_no_rpi(phba, ndlp);
ndlp->nlp_rpi = 0;
+ ndlp->nlp_flag &= ~NLP_RPI_VALID;
return 1;
}
return 0;
@@ -2252,7 +3015,7 @@ lpfc_cleanup_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
/* cleanup any ndlp on mbox q waiting for reglogin cmpl */
if ((mb = phba->sli.mbox_active)) {
- if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
+ if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
(ndlp == (struct lpfc_nodelist *) mb->context2)) {
mb->context2 = NULL;
mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
@@ -2261,7 +3024,7 @@ lpfc_cleanup_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
spin_lock_irq(&phba->hbalock);
list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) {
- if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
+ if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
(ndlp == (struct lpfc_nodelist *) mb->context2)) {
mp = (struct lpfc_dmabuf *) (mb->context1);
if (mp) {
@@ -2309,13 +3072,14 @@ lpfc_nlp_remove(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
int rc;
lpfc_cancel_retry_delay_tmo(vport, ndlp);
- if (ndlp->nlp_flag & NLP_DEFER_RM && !ndlp->nlp_rpi) {
+ if ((ndlp->nlp_flag & NLP_DEFER_RM) &&
+ !(ndlp->nlp_flag & NLP_RPI_VALID)) {
/* For this case we need to cleanup the default rpi
* allocated by the firmware.
*/
if ((mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL))
!= NULL) {
- rc = lpfc_reg_login(phba, vport->vpi, ndlp->nlp_DID,
+ rc = lpfc_reg_rpi(phba, vport->vpi, ndlp->nlp_DID,
(uint8_t *) &vport->fc_sparam, mbox, 0);
if (rc) {
mempool_free(mbox, phba->mbox_mem_pool);
@@ -2553,7 +3317,8 @@ lpfc_issue_clear_la(struct lpfc_hba *phba, struct lpfc_vport *vport)
* clear_la then don't send it.
*/
if ((phba->link_state >= LPFC_CLEAR_LA) ||
- (vport->port_type != LPFC_PHYSICAL_PORT))
+ (vport->port_type != LPFC_PHYSICAL_PORT) ||
+ (phba->sli_rev == LPFC_SLI_REV4))
return;
/* Link up discovery */
@@ -2582,7 +3347,7 @@ lpfc_issue_reg_vpi(struct lpfc_hba *phba, struct lpfc_vport *vport)
regvpimbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (regvpimbox) {
- lpfc_reg_vpi(phba, vport->vpi, vport->fc_myDID, regvpimbox);
+ lpfc_reg_vpi(vport, regvpimbox);
regvpimbox->mbox_cmpl = lpfc_mbx_cmpl_reg_vpi;
regvpimbox->vport = vport;
if (lpfc_sli_issue_mbox(phba, regvpimbox, MBX_NOWAIT)
@@ -2642,7 +3407,8 @@ lpfc_disc_start(struct lpfc_vport *vport)
*/
if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
!(vport->fc_flag & FC_PT2PT) &&
- !(vport->fc_flag & FC_RSCN_MODE)) {
+ !(vport->fc_flag & FC_RSCN_MODE) &&
+ (phba->sli_rev < LPFC_SLI_REV4)) {
lpfc_issue_reg_vpi(phba, vport);
return;
}
@@ -2919,11 +3685,13 @@ restart_disc:
* set port_state to PORT_READY if SLI2.
* cmpl_reg_vpi will set port_state to READY for SLI3.
*/
- if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
- lpfc_issue_reg_vpi(phba, vport);
- else { /* NPIV Not enabled */
- lpfc_issue_clear_la(phba, vport);
- vport->port_state = LPFC_VPORT_READY;
+ if (phba->sli_rev < LPFC_SLI_REV4) {
+ if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
+ lpfc_issue_reg_vpi(phba, vport);
+ else { /* NPIV Not enabled */
+ lpfc_issue_clear_la(phba, vport);
+ vport->port_state = LPFC_VPORT_READY;
+ }
}
/* Setup and issue mailbox INITIALIZE LINK command */
@@ -2939,7 +3707,7 @@ restart_disc:
lpfc_linkdown(phba);
lpfc_init_link(phba, initlinkmbox, phba->cfg_topology,
phba->cfg_link_speed);
- initlinkmbox->mb.un.varInitLnk.lipsr_AL_PA = 0;
+ initlinkmbox->u.mb.un.varInitLnk.lipsr_AL_PA = 0;
initlinkmbox->vport = vport;
initlinkmbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
rc = lpfc_sli_issue_mbox(phba, initlinkmbox, MBX_NOWAIT);
@@ -2959,11 +3727,13 @@ restart_disc:
* set port_state to PORT_READY if SLI2.
* cmpl_reg_vpi will set port_state to READY for SLI3.
*/
- if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
- lpfc_issue_reg_vpi(phba, vport);
- else { /* NPIV Not enabled */
- lpfc_issue_clear_la(phba, vport);
- vport->port_state = LPFC_VPORT_READY;
+ if (phba->sli_rev < LPFC_SLI_REV4) {
+ if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
+ lpfc_issue_reg_vpi(phba, vport);
+ else { /* NPIV Not enabled */
+ lpfc_issue_clear_la(phba, vport);
+ vport->port_state = LPFC_VPORT_READY;
+ }
}
break;
@@ -3036,7 +3806,7 @@ restart_disc:
void
lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
struct lpfc_vport *vport = pmb->vport;
@@ -3044,6 +3814,7 @@ lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
pmb->context1 = NULL;
ndlp->nlp_rpi = mb->un.varWords[0];
+ ndlp->nlp_flag |= NLP_RPI_VALID;
ndlp->nlp_type |= NLP_FABRIC;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
@@ -3297,3 +4068,395 @@ lpfc_nlp_not_used(struct lpfc_nodelist *ndlp)
return 1;
return 0;
}
+
+/**
+ * lpfc_fcf_inuse - Check if FCF can be unregistered.
+ * @phba: Pointer to hba context object.
+ *
+ * This function iterate through all FC nodes associated
+ * will all vports to check if there is any node with
+ * fc_rports associated with it. If there is an fc_rport
+ * associated with the node, then the node is either in
+ * discovered state or its devloss_timer is pending.
+ */
+static int
+lpfc_fcf_inuse(struct lpfc_hba *phba)
+{
+ struct lpfc_vport **vports;
+ int i, ret = 0;
+ struct lpfc_nodelist *ndlp;
+ struct Scsi_Host *shost;
+
+ vports = lpfc_create_vport_work_array(phba);
+
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
+ shost = lpfc_shost_from_vport(vports[i]);
+ spin_lock_irq(shost->host_lock);
+ list_for_each_entry(ndlp, &vports[i]->fc_nodes, nlp_listp) {
+ if (NLP_CHK_NODE_ACT(ndlp) && ndlp->rport &&
+ (ndlp->rport->roles & FC_RPORT_ROLE_FCP_TARGET)) {
+ ret = 1;
+ spin_unlock_irq(shost->host_lock);
+ goto out;
+ }
+ }
+ spin_unlock_irq(shost->host_lock);
+ }
+out:
+ lpfc_destroy_vport_work_array(phba, vports);
+ return ret;
+}
+
+/**
+ * lpfc_unregister_vfi_cmpl - Completion handler for unreg vfi.
+ * @phba: Pointer to hba context object.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * This function frees memory associated with the mailbox command.
+ */
+static void
+lpfc_unregister_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+ struct lpfc_vport *vport = mboxq->vport;
+
+ if (mboxq->u.mb.mbxStatus) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+ "2555 UNREG_VFI mbxStatus error x%x "
+ "HBA state x%x\n",
+ mboxq->u.mb.mbxStatus, vport->port_state);
+ }
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return;
+}
+
+/**
+ * lpfc_unregister_fcfi_cmpl - Completion handler for unreg fcfi.
+ * @phba: Pointer to hba context object.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * This function frees memory associated with the mailbox command.
+ */
+static void
+lpfc_unregister_fcfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+ struct lpfc_vport *vport = mboxq->vport;
+
+ if (mboxq->u.mb.mbxStatus) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+ "2550 UNREG_FCFI mbxStatus error x%x "
+ "HBA state x%x\n",
+ mboxq->u.mb.mbxStatus, vport->port_state);
+ }
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return;
+}
+
+/**
+ * lpfc_unregister_unused_fcf - Unregister FCF if all devices are disconnected.
+ * @phba: Pointer to hba context object.
+ *
+ * This function check if there are any connected remote port for the FCF and
+ * if all the devices are disconnected, this function unregister FCFI.
+ * This function also tries to use another FCF for discovery.
+ */
+void
+lpfc_unregister_unused_fcf(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *mbox;
+ int rc;
+ struct lpfc_vport **vports;
+ int i;
+
+ spin_lock_irq(&phba->hbalock);
+ /*
+ * If HBA is not running in FIP mode or
+ * If HBA does not support FCoE or
+ * If FCF is not registered.
+ * do nothing.
+ */
+ if (!(phba->hba_flag & HBA_FCOE_SUPPORT) ||
+ !(phba->fcf.fcf_flag & FCF_REGISTERED) ||
+ (phba->cfg_enable_fip == 0)) {
+ spin_unlock_irq(&phba->hbalock);
+ return;
+ }
+ spin_unlock_irq(&phba->hbalock);
+
+ if (lpfc_fcf_inuse(phba))
+ return;
+
+
+ /* Unregister VPIs */
+ vports = lpfc_create_vport_work_array(phba);
+ if (vports &&
+ (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED))
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
+ lpfc_mbx_unreg_vpi(vports[i]);
+ vports[i]->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
+ vports[i]->vfi_state &= ~LPFC_VFI_REGISTERED;
+ }
+ lpfc_destroy_vport_work_array(phba, vports);
+
+ /* Unregister VFI */
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+ "2556 UNREG_VFI mbox allocation failed"
+ "HBA state x%x\n",
+ phba->pport->port_state);
+ return;
+ }
+
+ lpfc_unreg_vfi(mbox, phba->pport->vfi);
+ mbox->vport = phba->pport;
+ mbox->mbox_cmpl = lpfc_unregister_vfi_cmpl;
+
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
+ if (rc == MBX_NOT_FINISHED) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+ "2557 UNREG_VFI issue mbox failed rc x%x "
+ "HBA state x%x\n",
+ rc, phba->pport->port_state);
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return;
+ }
+
+ /* Unregister FCF */
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+ "2551 UNREG_FCFI mbox allocation failed"
+ "HBA state x%x\n",
+ phba->pport->port_state);
+ return;
+ }
+
+ lpfc_unreg_fcfi(mbox, phba->fcf.fcfi);
+ mbox->vport = phba->pport;
+ mbox->mbox_cmpl = lpfc_unregister_fcfi_cmpl;
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
+
+ if (rc == MBX_NOT_FINISHED) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+ "2552 UNREG_FCFI issue mbox failed rc x%x "
+ "HBA state x%x\n",
+ rc, phba->pport->port_state);
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return;
+ }
+
+ spin_lock_irq(&phba->hbalock);
+ phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_REGISTERED |
+ FCF_DISCOVERED | FCF_BOOT_ENABLE | FCF_IN_USE |
+ FCF_VALID_VLAN);
+ spin_unlock_irq(&phba->hbalock);
+
+ /*
+ * If driver is not unloading, check if there is any other
+ * FCF record that can be used for discovery.
+ */
+ if ((phba->pport->load_flag & FC_UNLOADING) ||
+ (phba->link_state < LPFC_LINK_UP))
+ return;
+
+ rc = lpfc_sli4_read_fcf_record(phba, LPFC_FCOE_FCF_GET_FIRST);
+
+ if (rc)
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+ "2553 lpfc_unregister_unused_fcf failed to read FCF"
+ " record HBA state x%x\n",
+ phba->pport->port_state);
+}
+
+/**
+ * lpfc_read_fcf_conn_tbl - Create driver FCF connection table.
+ * @phba: Pointer to hba context object.
+ * @buff: Buffer containing the FCF connection table as in the config
+ * region.
+ * This function create driver data structure for the FCF connection
+ * record table read from config region 23.
+ */
+static void
+lpfc_read_fcf_conn_tbl(struct lpfc_hba *phba,
+ uint8_t *buff)
+{
+ struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry;
+ struct lpfc_fcf_conn_hdr *conn_hdr;
+ struct lpfc_fcf_conn_rec *conn_rec;
+ uint32_t record_count;
+ int i;
+
+ /* Free the current connect table */
+ list_for_each_entry_safe(conn_entry, next_conn_entry,
+ &phba->fcf_conn_rec_list, list)
+ kfree(conn_entry);
+
+ conn_hdr = (struct lpfc_fcf_conn_hdr *) buff;
+ record_count = conn_hdr->length * sizeof(uint32_t)/
+ sizeof(struct lpfc_fcf_conn_rec);
+
+ conn_rec = (struct lpfc_fcf_conn_rec *)
+ (buff + sizeof(struct lpfc_fcf_conn_hdr));
+
+ for (i = 0; i < record_count; i++) {
+ if (!(conn_rec[i].flags & FCFCNCT_VALID))
+ continue;
+ conn_entry = kzalloc(sizeof(struct lpfc_fcf_conn_entry),
+ GFP_KERNEL);
+ if (!conn_entry) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2566 Failed to allocate connection"
+ " table entry\n");
+ return;
+ }
+
+ memcpy(&conn_entry->conn_rec, &conn_rec[i],
+ sizeof(struct lpfc_fcf_conn_rec));
+ conn_entry->conn_rec.vlan_tag =
+ le16_to_cpu(conn_entry->conn_rec.vlan_tag) & 0xFFF;
+ conn_entry->conn_rec.flags =
+ le16_to_cpu(conn_entry->conn_rec.flags);
+ list_add_tail(&conn_entry->list,
+ &phba->fcf_conn_rec_list);
+ }
+}
+
+/**
+ * lpfc_read_fcoe_param - Read FCoe parameters from conf region..
+ * @phba: Pointer to hba context object.
+ * @buff: Buffer containing the FCoE parameter data structure.
+ *
+ * This function update driver data structure with config
+ * parameters read from config region 23.
+ */
+static void
+lpfc_read_fcoe_param(struct lpfc_hba *phba,
+ uint8_t *buff)
+{
+ struct lpfc_fip_param_hdr *fcoe_param_hdr;
+ struct lpfc_fcoe_params *fcoe_param;
+
+ fcoe_param_hdr = (struct lpfc_fip_param_hdr *)
+ buff;
+ fcoe_param = (struct lpfc_fcoe_params *)
+ buff + sizeof(struct lpfc_fip_param_hdr);
+
+ if ((fcoe_param_hdr->parm_version != FIPP_VERSION) ||
+ (fcoe_param_hdr->length != FCOE_PARAM_LENGTH))
+ return;
+
+ if (bf_get(lpfc_fip_param_hdr_fipp_mode, fcoe_param_hdr) ==
+ FIPP_MODE_ON)
+ phba->cfg_enable_fip = 1;
+
+ if (bf_get(lpfc_fip_param_hdr_fipp_mode, fcoe_param_hdr) ==
+ FIPP_MODE_OFF)
+ phba->cfg_enable_fip = 0;
+
+ if (fcoe_param_hdr->parm_flags & FIPP_VLAN_VALID) {
+ phba->valid_vlan = 1;
+ phba->vlan_id = le16_to_cpu(fcoe_param->vlan_tag) &
+ 0xFFF;
+ }
+
+ phba->fc_map[0] = fcoe_param->fc_map[0];
+ phba->fc_map[1] = fcoe_param->fc_map[1];
+ phba->fc_map[2] = fcoe_param->fc_map[2];
+ return;
+}
+
+/**
+ * lpfc_get_rec_conf23 - Get a record type in config region data.
+ * @buff: Buffer containing config region 23 data.
+ * @size: Size of the data buffer.
+ * @rec_type: Record type to be searched.
+ *
+ * This function searches config region data to find the begining
+ * of the record specified by record_type. If record found, this
+ * function return pointer to the record else return NULL.
+ */
+static uint8_t *
+lpfc_get_rec_conf23(uint8_t *buff, uint32_t size, uint8_t rec_type)
+{
+ uint32_t offset = 0, rec_length;
+
+ if ((buff[0] == LPFC_REGION23_LAST_REC) ||
+ (size < sizeof(uint32_t)))
+ return NULL;
+
+ rec_length = buff[offset + 1];
+
+ /*
+ * One TLV record has one word header and number of data words
+ * specified in the rec_length field of the record header.
+ */
+ while ((offset + rec_length * sizeof(uint32_t) + sizeof(uint32_t))
+ <= size) {
+ if (buff[offset] == rec_type)
+ return &buff[offset];
+
+ if (buff[offset] == LPFC_REGION23_LAST_REC)
+ return NULL;
+
+ offset += rec_length * sizeof(uint32_t) + sizeof(uint32_t);
+ rec_length = buff[offset + 1];
+ }
+ return NULL;
+}
+
+/**
+ * lpfc_parse_fcoe_conf - Parse FCoE config data read from config region 23.
+ * @phba: Pointer to lpfc_hba data structure.
+ * @buff: Buffer containing config region 23 data.
+ * @size: Size of the data buffer.
+ *
+ * This fuction parse the FCoE config parameters in config region 23 and
+ * populate driver data structure with the parameters.
+ */
+void
+lpfc_parse_fcoe_conf(struct lpfc_hba *phba,
+ uint8_t *buff,
+ uint32_t size)
+{
+ uint32_t offset = 0, rec_length;
+ uint8_t *rec_ptr;
+
+ /*
+ * If data size is less than 2 words signature and version cannot be
+ * verified.
+ */
+ if (size < 2*sizeof(uint32_t))
+ return;
+
+ /* Check the region signature first */
+ if (memcmp(buff, LPFC_REGION23_SIGNATURE, 4)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2567 Config region 23 has bad signature\n");
+ return;
+ }
+
+ offset += 4;
+
+ /* Check the data structure version */
+ if (buff[offset] != LPFC_REGION23_VERSION) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2568 Config region 23 has bad version\n");
+ return;
+ }
+ offset += 4;
+
+ rec_length = buff[offset + 1];
+
+ /* Read FCoE param record */
+ rec_ptr = lpfc_get_rec_conf23(&buff[offset],
+ size - offset, FCOE_PARAM_TYPE);
+ if (rec_ptr)
+ lpfc_read_fcoe_param(phba, rec_ptr);
+
+ /* Read FCF connection table */
+ rec_ptr = lpfc_get_rec_conf23(&buff[offset],
+ size - offset, FCOE_CONN_TBL_TYPE);
+ if (rec_ptr)
+ lpfc_read_fcf_conn_tbl(phba, rec_ptr);
+
+}
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 4168c7b..02aa016 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -471,6 +471,35 @@ struct serv_parm { /* Structure is in Big Endian format */
};
/*
+ * Virtual Fabric Tagging Header
+ */
+struct fc_vft_header {
+ uint32_t word0;
+#define fc_vft_hdr_r_ctl_SHIFT 24
+#define fc_vft_hdr_r_ctl_MASK 0xFF
+#define fc_vft_hdr_r_ctl_WORD word0
+#define fc_vft_hdr_ver_SHIFT 22
+#define fc_vft_hdr_ver_MASK 0x3
+#define fc_vft_hdr_ver_WORD word0
+#define fc_vft_hdr_type_SHIFT 18
+#define fc_vft_hdr_type_MASK 0xF
+#define fc_vft_hdr_type_WORD word0
+#define fc_vft_hdr_e_SHIFT 16
+#define fc_vft_hdr_e_MASK 0x1
+#define fc_vft_hdr_e_WORD word0
+#define fc_vft_hdr_priority_SHIFT 13
+#define fc_vft_hdr_priority_MASK 0x7
+#define fc_vft_hdr_priority_WORD word0
+#define fc_vft_hdr_vf_id_SHIFT 1
+#define fc_vft_hdr_vf_id_MASK 0xFFF
+#define fc_vft_hdr_vf_id_WORD word0
+ uint32_t word1;
+#define fc_vft_hdr_hopct_SHIFT 24
+#define fc_vft_hdr_hopct_MASK 0xFF
+#define fc_vft_hdr_hopct_WORD word1
+};
+
+/*
* Extended Link Service LS_COMMAND codes (Payload Word 0)
*/
#ifdef __BIG_ENDIAN_BITFIELD
@@ -1152,6 +1181,9 @@ typedef struct {
#define PCI_DEVICE_ID_HORNET 0xfe05
#define PCI_DEVICE_ID_ZEPHYR_SCSP 0xfe11
#define PCI_DEVICE_ID_ZEPHYR_DCSP 0xfe12
+#define PCI_VENDOR_ID_SERVERENGINE 0x19a2
+#define PCI_DEVICE_ID_TIGERSHARK 0x0704
+#define PCI_DEVICE_ID_TIGERSHARK_S 0x0705
#define JEDEC_ID_ADDRESS 0x0080001c
#define FIREFLY_JEDEC_ID 0x1ACC
@@ -1342,15 +1374,21 @@ typedef struct { /* FireFly BIU registers */
#define MBX_READ_LA64 0x95
#define MBX_REG_VPI 0x96
#define MBX_UNREG_VPI 0x97
-#define MBX_REG_VNPID 0x96
-#define MBX_UNREG_VNPID 0x97
#define MBX_WRITE_WWN 0x98
#define MBX_SET_DEBUG 0x99
#define MBX_LOAD_EXP_ROM 0x9C
-
-#define MBX_MAX_CMDS 0x9D
+#define MBX_SLI4_CONFIG 0x9B
+#define MBX_SLI4_REQ_FTRS 0x9D
+#define MBX_MAX_CMDS 0x9E
+#define MBX_RESUME_RPI 0x9E
#define MBX_SLI2_CMD_MASK 0x80
+#define MBX_REG_VFI 0x9F
+#define MBX_REG_FCFI 0xA0
+#define MBX_UNREG_VFI 0xA1
+#define MBX_UNREG_FCFI 0xA2
+#define MBX_INIT_VFI 0xA3
+#define MBX_INIT_VPI 0xA4
/* IOCB Commands */
@@ -1440,6 +1478,16 @@ typedef struct { /* FireFly BIU registers */
#define CMD_IOCB_LOGENTRY_CN 0x94
#define CMD_IOCB_LOGENTRY_ASYNC_CN 0x96
+/* Unhandled Data Security SLI Commands */
+#define DSSCMD_IWRITE64_CR 0xD8
+#define DSSCMD_IWRITE64_CX 0xD9
+#define DSSCMD_IREAD64_CR 0xDA
+#define DSSCMD_IREAD64_CX 0xDB
+#define DSSCMD_INVALIDATE_DEK 0xDC
+#define DSSCMD_SET_KEK 0xDD
+#define DSSCMD_GET_KEK_ID 0xDE
+#define DSSCMD_GEN_XFER 0xDF
+
#define CMD_MAX_IOCB_CMD 0xE6
#define CMD_IOCB_MASK 0xff
@@ -1466,6 +1514,7 @@ typedef struct { /* FireFly BIU registers */
#define MBXERR_BAD_RCV_LENGTH 14
#define MBXERR_DMA_ERROR 15
#define MBXERR_ERROR 16
+#define MBXERR_LINK_DOWN 0x33
#define MBX_NOT_FINISHED 255
#define MBX_BUSY 0xffffff /* Attempted cmd to busy Mailbox */
@@ -1504,32 +1553,6 @@ struct ulp_bde {
#endif
};
-struct ulp_bde64 { /* SLI-2 */
- union ULP_BDE_TUS {
- uint32_t w;
- struct {
-#ifdef __BIG_ENDIAN_BITFIELD
- uint32_t bdeFlags:8; /* BDE Flags 0 IS A SUPPORTED
- VALUE !! */
- uint32_t bdeSize:24; /* Size of buffer (in bytes) */
-#else /* __LITTLE_ENDIAN_BITFIELD */
- uint32_t bdeSize:24; /* Size of buffer (in bytes) */
- uint32_t bdeFlags:8; /* BDE Flags 0 IS A SUPPORTED
- VALUE !! */
-#endif
-#define BUFF_TYPE_BDE_64 0x00 /* BDE (Host_resident) */
-#define BUFF_TYPE_BDE_IMMED 0x01 /* Immediate Data BDE */
-#define BUFF_TYPE_BDE_64P 0x02 /* BDE (Port-resident) */
-#define BUFF_TYPE_BDE_64I 0x08 /* Input BDE (Host-resident) */
-#define BUFF_TYPE_BDE_64IP 0x0A /* Input BDE (Port-resident) */
-#define BUFF_TYPE_BLP_64 0x40 /* BLP (Host-resident) */
-#define BUFF_TYPE_BLP_64P 0x42 /* BLP (Port-resident) */
- } f;
- } tus;
- uint32_t addrLow;
- uint32_t addrHigh;
-};
-
typedef struct ULP_BDL { /* SLI-2 */
#ifdef __BIG_ENDIAN_BITFIELD
uint32_t bdeFlags:8; /* BDL Flags */
@@ -2287,7 +2310,7 @@ typedef struct {
uint32_t rsvd3;
uint32_t rsvd4;
uint32_t rsvd5;
- uint16_t rsvd6;
+ uint16_t vfi;
uint16_t vpi;
#else /* __LITTLE_ENDIAN */
uint32_t rsvd1;
@@ -2297,7 +2320,7 @@ typedef struct {
uint32_t rsvd4;
uint32_t rsvd5;
uint16_t vpi;
- uint16_t rsvd6;
+ uint16_t vfi;
#endif
} REG_VPI_VAR;
@@ -2457,7 +2480,7 @@ typedef struct {
uint32_t entry_index:16;
#endif
- uint32_t rsvd1;
+ uint32_t sli4_length;
uint32_t word_cnt;
uint32_t resp_offset;
} DUMP_VAR;
@@ -2470,9 +2493,32 @@ typedef struct {
#define DMP_RSP_OFFSET 0x14 /* word 5 contains first word of rsp */
#define DMP_RSP_SIZE 0x6C /* maximum of 27 words of rsp data */
+#define DMP_REGION_VPORT 0x16 /* VPort info region */
+#define DMP_VPORT_REGION_SIZE 0x200
+#define DMP_MBOX_OFFSET_WORD 0x5
+
+#define DMP_REGION_FCOEPARAM 0x17 /* fcoe param region */
+#define DMP_FCOEPARAM_RGN_SIZE 0x400
+
#define WAKE_UP_PARMS_REGION_ID 4
#define WAKE_UP_PARMS_WORD_SIZE 15
+struct vport_rec {
+ uint8_t wwpn[8];
+ uint8_t wwnn[8];
+};
+
+#define VPORT_INFO_SIG 0x32324752
+#define VPORT_INFO_REV_MASK 0xff
+#define VPORT_INFO_REV 0x1
+#define MAX_STATIC_VPORT_COUNT 16
+struct static_vport_info {
+ uint32_t signature;
+ uint32_t rev;
+ struct vport_rec vport_list[MAX_STATIC_VPORT_COUNT];
+ uint32_t resvd[66];
+};
+
/* Option rom version structure */
struct prog_id {
#ifdef __BIG_ENDIAN_BITFIELD
@@ -2697,7 +2743,9 @@ typedef struct {
#endif
#ifdef __BIG_ENDIAN_BITFIELD
- uint32_t rsvd1 : 23; /* Reserved */
+ uint32_t rsvd1 : 19; /* Reserved */
+ uint32_t cdss : 1; /* Configure Data Security SLI */
+ uint32_t rsvd2 : 3; /* Reserved */
uint32_t cbg : 1; /* Configure BlockGuard */
uint32_t cmv : 1; /* Configure Max VPIs */
uint32_t ccrp : 1; /* Config Command Ring Polling */
@@ -2717,10 +2765,14 @@ typedef struct {
uint32_t ccrp : 1; /* Config Command Ring Polling */
uint32_t cmv : 1; /* Configure Max VPIs */
uint32_t cbg : 1; /* Configure BlockGuard */
- uint32_t rsvd1 : 23; /* Reserved */
+ uint32_t rsvd2 : 3; /* Reserved */
+ uint32_t cdss : 1; /* Configure Data Security SLI */
+ uint32_t rsvd1 : 19; /* Reserved */
#endif
#ifdef __BIG_ENDIAN_BITFIELD
- uint32_t rsvd2 : 23; /* Reserved */
+ uint32_t rsvd3 : 19; /* Reserved */
+ uint32_t gdss : 1; /* Configure Data Security SLI */
+ uint32_t rsvd4 : 3; /* Reserved */
uint32_t gbg : 1; /* Grant BlockGuard */
uint32_t gmv : 1; /* Grant Max VPIs */
uint32_t gcrp : 1; /* Grant Command Ring Polling */
@@ -2740,7 +2792,9 @@ typedef struct {
uint32_t gcrp : 1; /* Grant Command Ring Polling */
uint32_t gmv : 1; /* Grant Max VPIs */
uint32_t gbg : 1; /* Grant BlockGuard */
- uint32_t rsvd2 : 23; /* Reserved */
+ uint32_t rsvd4 : 3; /* Reserved */
+ uint32_t gdss : 1; /* Configure Data Security SLI */
+ uint32_t rsvd3 : 19; /* Reserved */
#endif
#ifdef __BIG_ENDIAN_BITFIELD
@@ -2753,20 +2807,20 @@ typedef struct {
#ifdef __BIG_ENDIAN_BITFIELD
uint32_t max_hbq : 16; /* Max HBQs Host expect to configure */
- uint32_t rsvd3 : 16; /* Max HBQs Host expect to configure */
+ uint32_t rsvd5 : 16; /* Max HBQs Host expect to configure */
#else /* __LITTLE_ENDIAN */
- uint32_t rsvd3 : 16; /* Max HBQs Host expect to configure */
+ uint32_t rsvd5 : 16; /* Max HBQs Host expect to configure */
uint32_t max_hbq : 16; /* Max HBQs Host expect to configure */
#endif
- uint32_t rsvd4; /* Reserved */
+ uint32_t rsvd6; /* Reserved */
#ifdef __BIG_ENDIAN_BITFIELD
- uint32_t rsvd5 : 16; /* Reserved */
+ uint32_t rsvd7 : 16; /* Reserved */
uint32_t max_vpi : 16; /* Max number of virt N-Ports */
#else /* __LITTLE_ENDIAN */
uint32_t max_vpi : 16; /* Max number of virt N-Ports */
- uint32_t rsvd5 : 16; /* Reserved */
+ uint32_t rsvd7 : 16; /* Reserved */
#endif
} CONFIG_PORT_VAR;
@@ -3666,3 +3720,5 @@ lpfc_error_lost_link(IOCB_t *iocbp)
#define MENLO_TIMEOUT 30
#define SETVAR_MLOMNT 0x103107
#define SETVAR_MLORST 0x103007
+
+#define BPL_ALIGN_SZ 8 /* 8 byte alignment for bpl and mbufs */
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
new file mode 100644
index 0000000..39c34b3
--- /dev/null
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -0,0 +1,2141 @@
+/*******************************************************************
+ * This file is part of the Emulex Linux Device Driver for *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2009 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
+ * www.emulex.com *
+ * *
+ * This program is free software; you can redistribute it and/or *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
+ *******************************************************************/
+
+/* Macros to deal with bit fields. Each bit field must have 3 #defines
+ * associated with it (_SHIFT, _MASK, and _WORD).
+ * EG. For a bit field that is in the 7th bit of the "field4" field of a
+ * structure and is 2 bits in size the following #defines must exist:
+ * struct temp {
+ * uint32_t field1;
+ * uint32_t field2;
+ * uint32_t field3;
+ * uint32_t field4;
+ * #define example_bit_field_SHIFT 7
+ * #define example_bit_field_MASK 0x03
+ * #define example_bit_field_WORD field4
+ * uint32_t field5;
+ * };
+ * Then the macros below may be used to get or set the value of that field.
+ * EG. To get the value of the bit field from the above example:
+ * struct temp t1;
+ * value = bf_get(example_bit_field, &t1);
+ * And then to set that bit field:
+ * bf_set(example_bit_field, &t1, 2);
+ * Or clear that bit field:
+ * bf_set(example_bit_field, &t1, 0);
+ */
+#define bf_get(name, ptr) \
+ (((ptr)->name##_WORD >> name##_SHIFT) & name##_MASK)
+#define bf_set(name, ptr, value) \
+ ((ptr)->name##_WORD = ((((value) & name##_MASK) << name##_SHIFT) | \
+ ((ptr)->name##_WORD & ~(name##_MASK << name##_SHIFT))))
+
+struct dma_address {
+ uint32_t addr_lo;
+ uint32_t addr_hi;
+};
+
+#define LPFC_SLI4_BAR0 1
+#define LPFC_SLI4_BAR1 2
+#define LPFC_SLI4_BAR2 4
+
+#define LPFC_SLI4_MBX_EMBED true
+#define LPFC_SLI4_MBX_NEMBED false
+
+#define LPFC_SLI4_MB_WORD_COUNT 64
+#define LPFC_MAX_MQ_PAGE 8
+#define LPFC_MAX_WQ_PAGE 8
+#define LPFC_MAX_CQ_PAGE 4
+#define LPFC_MAX_EQ_PAGE 8
+
+#define LPFC_VIR_FUNC_MAX 32 /* Maximum number of virtual functions */
+#define LPFC_PCI_FUNC_MAX 5 /* Maximum number of PCI functions */
+#define LPFC_VFR_PAGE_SIZE 0x1000 /* 4KB BAR2 per-VF register page size */
+
+/* Define SLI4 Alignment requirements. */
+#define LPFC_ALIGN_16_BYTE 16
+#define LPFC_ALIGN_64_BYTE 64
+
+/* Define SLI4 specific definitions. */
+#define LPFC_MQ_CQE_BYTE_OFFSET 256
+#define LPFC_MBX_CMD_HDR_LENGTH 16
+#define LPFC_MBX_ERROR_RANGE 0x4000
+#define LPFC_BMBX_BIT1_ADDR_HI 0x2
+#define LPFC_BMBX_BIT1_ADDR_LO 0
+#define LPFC_RPI_HDR_COUNT 64
+#define LPFC_HDR_TEMPLATE_SIZE 4096
+#define LPFC_RPI_ALLOC_ERROR 0xFFFF
+#define LPFC_FCF_RECORD_WD_CNT 132
+#define LPFC_ENTIRE_FCF_DATABASE 0
+#define LPFC_DFLT_FCF_INDEX 0
+
+/* Virtual function numbers */
+#define LPFC_VF0 0
+#define LPFC_VF1 1
+#define LPFC_VF2 2
+#define LPFC_VF3 3
+#define LPFC_VF4 4
+#define LPFC_VF5 5
+#define LPFC_VF6 6
+#define LPFC_VF7 7
+#define LPFC_VF8 8
+#define LPFC_VF9 9
+#define LPFC_VF10 10
+#define LPFC_VF11 11
+#define LPFC_VF12 12
+#define LPFC_VF13 13
+#define LPFC_VF14 14
+#define LPFC_VF15 15
+#define LPFC_VF16 16
+#define LPFC_VF17 17
+#define LPFC_VF18 18
+#define LPFC_VF19 19
+#define LPFC_VF20 20
+#define LPFC_VF21 21
+#define LPFC_VF22 22
+#define LPFC_VF23 23
+#define LPFC_VF24 24
+#define LPFC_VF25 25
+#define LPFC_VF26 26
+#define LPFC_VF27 27
+#define LPFC_VF28 28
+#define LPFC_VF29 29
+#define LPFC_VF30 30
+#define LPFC_VF31 31
+
+/* PCI function numbers */
+#define LPFC_PCI_FUNC0 0
+#define LPFC_PCI_FUNC1 1
+#define LPFC_PCI_FUNC2 2
+#define LPFC_PCI_FUNC3 3
+#define LPFC_PCI_FUNC4 4
+
+/* Active interrupt test count */
+#define LPFC_ACT_INTR_CNT 4
+
+/* Delay Multiplier constant */
+#define LPFC_DMULT_CONST 651042
+#define LPFC_MIM_IMAX 636
+#define LPFC_FP_DEF_IMAX 10000
+#define LPFC_SP_DEF_IMAX 10000
+
+struct ulp_bde64 {
+ union ULP_BDE_TUS {
+ uint32_t w;
+ struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+ uint32_t bdeFlags:8; /* BDE Flags 0 IS A SUPPORTED
+ VALUE !! */
+ uint32_t bdeSize:24; /* Size of buffer (in bytes) */
+#else /* __LITTLE_ENDIAN_BITFIELD */
+ uint32_t bdeSize:24; /* Size of buffer (in bytes) */
+ uint32_t bdeFlags:8; /* BDE Flags 0 IS A SUPPORTED
+ VALUE !! */
+#endif
+#define BUFF_TYPE_BDE_64 0x00 /* BDE (Host_resident) */
+#define BUFF_TYPE_BDE_IMMED 0x01 /* Immediate Data BDE */
+#define BUFF_TYPE_BDE_64P 0x02 /* BDE (Port-resident) */
+#define BUFF_TYPE_BDE_64I 0x08 /* Input BDE (Host-resident) */
+#define BUFF_TYPE_BDE_64IP 0x0A /* Input BDE (Port-resident) */
+#define BUFF_TYPE_BLP_64 0x40 /* BLP (Host-resident) */
+#define BUFF_TYPE_BLP_64P 0x42 /* BLP (Port-resident) */
+ } f;
+ } tus;
+ uint32_t addrLow;
+ uint32_t addrHigh;
+};
+
+struct lpfc_sli4_flags {
+ uint32_t word0;
+#define lpfc_fip_flag_SHIFT 0
+#define lpfc_fip_flag_MASK 0x00000001
+#define lpfc_fip_flag_WORD word0
+};
+
+/* event queue entry structure */
+struct lpfc_eqe {
+ uint32_t word0;
+#define lpfc_eqe_resource_id_SHIFT 16
+#define lpfc_eqe_resource_id_MASK 0x000000FF
+#define lpfc_eqe_resource_id_WORD word0
+#define lpfc_eqe_minor_code_SHIFT 4
+#define lpfc_eqe_minor_code_MASK 0x00000FFF
+#define lpfc_eqe_minor_code_WORD word0
+#define lpfc_eqe_major_code_SHIFT 1
+#define lpfc_eqe_major_code_MASK 0x00000007
+#define lpfc_eqe_major_code_WORD word0
+#define lpfc_eqe_valid_SHIFT 0
+#define lpfc_eqe_valid_MASK 0x00000001
+#define lpfc_eqe_valid_WORD word0
+};
+
+/* completion queue entry structure (common fields for all cqe types) */
+struct lpfc_cqe {
+ uint32_t reserved0;
+ uint32_t reserved1;
+ uint32_t reserved2;
+ uint32_t word3;
+#define lpfc_cqe_valid_SHIFT 31
+#define lpfc_cqe_valid_MASK 0x00000001
+#define lpfc_cqe_valid_WORD word3
+#define lpfc_cqe_code_SHIFT 16
+#define lpfc_cqe_code_MASK 0x000000FF
+#define lpfc_cqe_code_WORD word3
+};
+
+/* Completion Queue Entry Status Codes */
+#define CQE_STATUS_SUCCESS 0x0
+#define CQE_STATUS_FCP_RSP_FAILURE 0x1
+#define CQE_STATUS_REMOTE_STOP 0x2
+#define CQE_STATUS_LOCAL_REJECT 0x3
+#define CQE_STATUS_NPORT_RJT 0x4
+#define CQE_STATUS_FABRIC_RJT 0x5
+#define CQE_STATUS_NPORT_BSY 0x6
+#define CQE_STATUS_FABRIC_BSY 0x7
+#define CQE_STATUS_INTERMED_RSP 0x8
+#define CQE_STATUS_LS_RJT 0x9
+#define CQE_STATUS_CMD_REJECT 0xb
+#define CQE_STATUS_FCP_TGT_LENCHECK 0xc
+#define CQE_STATUS_NEED_BUFF_ENTRY 0xf
+
+/* Status returned by hardware (valid only if status = CQE_STATUS_SUCCESS). */
+#define CQE_HW_STATUS_NO_ERR 0x0
+#define CQE_HW_STATUS_UNDERRUN 0x1
+#define CQE_HW_STATUS_OVERRUN 0x2
+
+/* Completion Queue Entry Codes */
+#define CQE_CODE_COMPL_WQE 0x1
+#define CQE_CODE_RELEASE_WQE 0x2
+#define CQE_CODE_RECEIVE 0x4
+#define CQE_CODE_XRI_ABORTED 0x5
+
+/* completion queue entry for wqe completions */
+struct lpfc_wcqe_complete {
+ uint32_t word0;
+#define lpfc_wcqe_c_request_tag_SHIFT 16
+#define lpfc_wcqe_c_request_tag_MASK 0x0000FFFF
+#define lpfc_wcqe_c_request_tag_WORD word0
+#define lpfc_wcqe_c_status_SHIFT 8
+#define lpfc_wcqe_c_status_MASK 0x000000FF
+#define lpfc_wcqe_c_status_WORD word0
+#define lpfc_wcqe_c_hw_status_SHIFT 0
+#define lpfc_wcqe_c_hw_status_MASK 0x000000FF
+#define lpfc_wcqe_c_hw_status_WORD word0
+ uint32_t total_data_placed;
+ uint32_t parameter;
+ uint32_t word3;
+#define lpfc_wcqe_c_valid_SHIFT lpfc_cqe_valid_SHIFT
+#define lpfc_wcqe_c_valid_MASK lpfc_cqe_valid_MASK
+#define lpfc_wcqe_c_valid_WORD lpfc_cqe_valid_WORD
+#define lpfc_wcqe_c_xb_SHIFT 28
+#define lpfc_wcqe_c_xb_MASK 0x00000001
+#define lpfc_wcqe_c_xb_WORD word3
+#define lpfc_wcqe_c_pv_SHIFT 27
+#define lpfc_wcqe_c_pv_MASK 0x00000001
+#define lpfc_wcqe_c_pv_WORD word3
+#define lpfc_wcqe_c_priority_SHIFT 24
+#define lpfc_wcqe_c_priority_MASK 0x00000007
+#define lpfc_wcqe_c_priority_WORD word3
+#define lpfc_wcqe_c_code_SHIFT lpfc_cqe_code_SHIFT
+#define lpfc_wcqe_c_code_MASK lpfc_cqe_code_MASK
+#define lpfc_wcqe_c_code_WORD lpfc_cqe_code_WORD
+};
+
+/* completion queue entry for wqe release */
+struct lpfc_wcqe_release {
+ uint32_t reserved0;
+ uint32_t reserved1;
+ uint32_t word2;
+#define lpfc_wcqe_r_wq_id_SHIFT 16
+#define lpfc_wcqe_r_wq_id_MASK 0x0000FFFF
+#define lpfc_wcqe_r_wq_id_WORD word2
+#define lpfc_wcqe_r_wqe_index_SHIFT 0
+#define lpfc_wcqe_r_wqe_index_MASK 0x0000FFFF
+#define lpfc_wcqe_r_wqe_index_WORD word2
+ uint32_t word3;
+#define lpfc_wcqe_r_valid_SHIFT lpfc_cqe_valid_SHIFT
+#define lpfc_wcqe_r_valid_MASK lpfc_cqe_valid_MASK
+#define lpfc_wcqe_r_valid_WORD lpfc_cqe_valid_WORD
+#define lpfc_wcqe_r_code_SHIFT lpfc_cqe_code_SHIFT
+#define lpfc_wcqe_r_code_MASK lpfc_cqe_code_MASK
+#define lpfc_wcqe_r_code_WORD lpfc_cqe_code_WORD
+};
+
+struct sli4_wcqe_xri_aborted {
+ uint32_t word0;
+#define lpfc_wcqe_xa_status_SHIFT 8
+#define lpfc_wcqe_xa_status_MASK 0x000000FF
+#define lpfc_wcqe_xa_status_WORD word0
+ uint32_t parameter;
+ uint32_t word2;
+#define lpfc_wcqe_xa_remote_xid_SHIFT 16
+#define lpfc_wcqe_xa_remote_xid_MASK 0x0000FFFF
+#define lpfc_wcqe_xa_remote_xid_WORD word2
+#define lpfc_wcqe_xa_xri_SHIFT 0
+#define lpfc_wcqe_xa_xri_MASK 0x0000FFFF
+#define lpfc_wcqe_xa_xri_WORD word2
+ uint32_t word3;
+#define lpfc_wcqe_xa_valid_SHIFT lpfc_cqe_valid_SHIFT
+#define lpfc_wcqe_xa_valid_MASK lpfc_cqe_valid_MASK
+#define lpfc_wcqe_xa_valid_WORD lpfc_cqe_valid_WORD
+#define lpfc_wcqe_xa_ia_SHIFT 30
+#define lpfc_wcqe_xa_ia_MASK 0x00000001
+#define lpfc_wcqe_xa_ia_WORD word3
+#define CQE_XRI_ABORTED_IA_REMOTE 0
+#define CQE_XRI_ABORTED_IA_LOCAL 1
+#define lpfc_wcqe_xa_br_SHIFT 29
+#define lpfc_wcqe_xa_br_MASK 0x00000001
+#define lpfc_wcqe_xa_br_WORD word3
+#define CQE_XRI_ABORTED_BR_BA_ACC 0
+#define CQE_XRI_ABORTED_BR_BA_RJT 1
+#define lpfc_wcqe_xa_eo_SHIFT 28
+#define lpfc_wcqe_xa_eo_MASK 0x00000001
+#define lpfc_wcqe_xa_eo_WORD word3
+#define CQE_XRI_ABORTED_EO_REMOTE 0
+#define CQE_XRI_ABORTED_EO_LOCAL 1
+#define lpfc_wcqe_xa_code_SHIFT lpfc_cqe_code_SHIFT
+#define lpfc_wcqe_xa_code_MASK lpfc_cqe_code_MASK
+#define lpfc_wcqe_xa_code_WORD lpfc_cqe_code_WORD
+};
+
+/* completion queue entry structure for rqe completion */
+struct lpfc_rcqe {
+ uint32_t word0;
+#define lpfc_rcqe_bindex_SHIFT 16
+#define lpfc_rcqe_bindex_MASK 0x0000FFF
+#define lpfc_rcqe_bindex_WORD word0
+#define lpfc_rcqe_status_SHIFT 8
+#define lpfc_rcqe_status_MASK 0x000000FF
+#define lpfc_rcqe_status_WORD word0
+#define FC_STATUS_RQ_SUCCESS 0x10 /* Async receive successful */
+#define FC_STATUS_RQ_BUF_LEN_EXCEEDED 0x11 /* payload truncated */
+#define FC_STATUS_INSUFF_BUF_NEED_BUF 0x12 /* Insufficient buffers */
+#define FC_STATUS_INSUFF_BUF_FRM_DISC 0x13 /* Frame Discard */
+ uint32_t reserved1;
+ uint32_t word2;
+#define lpfc_rcqe_length_SHIFT 16
+#define lpfc_rcqe_length_MASK 0x0000FFFF
+#define lpfc_rcqe_length_WORD word2
+#define lpfc_rcqe_rq_id_SHIFT 6
+#define lpfc_rcqe_rq_id_MASK 0x000003FF
+#define lpfc_rcqe_rq_id_WORD word2
+#define lpfc_rcqe_fcf_id_SHIFT 0
+#define lpfc_rcqe_fcf_id_MASK 0x0000003F
+#define lpfc_rcqe_fcf_id_WORD word2
+ uint32_t word3;
+#define lpfc_rcqe_valid_SHIFT lpfc_cqe_valid_SHIFT
+#define lpfc_rcqe_valid_MASK lpfc_cqe_valid_MASK
+#define lpfc_rcqe_valid_WORD lpfc_cqe_valid_WORD
+#define lpfc_rcqe_port_SHIFT 30
+#define lpfc_rcqe_port_MASK 0x00000001
+#define lpfc_rcqe_port_WORD word3
+#define lpfc_rcqe_hdr_length_SHIFT 24
+#define lpfc_rcqe_hdr_length_MASK 0x0000001F
+#define lpfc_rcqe_hdr_length_WORD word3
+#define lpfc_rcqe_code_SHIFT lpfc_cqe_code_SHIFT
+#define lpfc_rcqe_code_MASK lpfc_cqe_code_MASK
+#define lpfc_rcqe_code_WORD lpfc_cqe_code_WORD
+#define lpfc_rcqe_eof_SHIFT 8
+#define lpfc_rcqe_eof_MASK 0x000000FF
+#define lpfc_rcqe_eof_WORD word3
+#define FCOE_EOFn 0x41
+#define FCOE_EOFt 0x42
+#define FCOE_EOFni 0x49
+#define FCOE_EOFa 0x50
+#define lpfc_rcqe_sof_SHIFT 0
+#define lpfc_rcqe_sof_MASK 0x000000FF
+#define lpfc_rcqe_sof_WORD word3
+#define FCOE_SOFi2 0x2d
+#define FCOE_SOFi3 0x2e
+#define FCOE_SOFn2 0x35
+#define FCOE_SOFn3 0x36
+};
+
+struct lpfc_wqe_generic{
+ struct ulp_bde64 bde;
+ uint32_t word3;
+ uint32_t word4;
+ uint32_t word5;
+ uint32_t word6;
+#define lpfc_wqe_gen_context_SHIFT 16
+#define lpfc_wqe_gen_context_MASK 0x0000FFFF
+#define lpfc_wqe_gen_context_WORD word6
+#define lpfc_wqe_gen_xri_SHIFT 0
+#define lpfc_wqe_gen_xri_MASK 0x0000FFFF
+#define lpfc_wqe_gen_xri_WORD word6
+ uint32_t word7;
+#define lpfc_wqe_gen_lnk_SHIFT 23
+#define lpfc_wqe_gen_lnk_MASK 0x00000001
+#define lpfc_wqe_gen_lnk_WORD word7
+#define lpfc_wqe_gen_erp_SHIFT 22
+#define lpfc_wqe_gen_erp_MASK 0x00000001
+#define lpfc_wqe_gen_erp_WORD word7
+#define lpfc_wqe_gen_pu_SHIFT 20
+#define lpfc_wqe_gen_pu_MASK 0x00000003
+#define lpfc_wqe_gen_pu_WORD word7
+#define lpfc_wqe_gen_class_SHIFT 16
+#define lpfc_wqe_gen_class_MASK 0x00000007
+#define lpfc_wqe_gen_class_WORD word7
+#define lpfc_wqe_gen_command_SHIFT 8
+#define lpfc_wqe_gen_command_MASK 0x000000FF
+#define lpfc_wqe_gen_command_WORD word7
+#define lpfc_wqe_gen_status_SHIFT 4
+#define lpfc_wqe_gen_status_MASK 0x0000000F
+#define lpfc_wqe_gen_status_WORD word7
+#define lpfc_wqe_gen_ct_SHIFT 2
+#define lpfc_wqe_gen_ct_MASK 0x00000007
+#define lpfc_wqe_gen_ct_WORD word7
+ uint32_t abort_tag;
+ uint32_t word9;
+#define lpfc_wqe_gen_request_tag_SHIFT 0
+#define lpfc_wqe_gen_request_tag_MASK 0x0000FFFF
+#define lpfc_wqe_gen_request_tag_WORD word9
+ uint32_t word10;
+#define lpfc_wqe_gen_ccp_SHIFT 24
+#define lpfc_wqe_gen_ccp_MASK 0x000000FF
+#define lpfc_wqe_gen_ccp_WORD word10
+#define lpfc_wqe_gen_ccpe_SHIFT 23
+#define lpfc_wqe_gen_ccpe_MASK 0x00000001
+#define lpfc_wqe_gen_ccpe_WORD word10
+#define lpfc_wqe_gen_pv_SHIFT 19
+#define lpfc_wqe_gen_pv_MASK 0x00000001
+#define lpfc_wqe_gen_pv_WORD word10
+#define lpfc_wqe_gen_pri_SHIFT 16
+#define lpfc_wqe_gen_pri_MASK 0x00000007
+#define lpfc_wqe_gen_pri_WORD word10
+ uint32_t word11;
+#define lpfc_wqe_gen_cq_id_SHIFT 16
+#define lpfc_wqe_gen_cq_id_MASK 0x000003FF
+#define lpfc_wqe_gen_cq_id_WORD word11
+#define LPFC_WQE_CQ_ID_DEFAULT 0x3ff
+#define lpfc_wqe_gen_wqec_SHIFT 7
+#define lpfc_wqe_gen_wqec_MASK 0x00000001
+#define lpfc_wqe_gen_wqec_WORD word11
+#define lpfc_wqe_gen_cmd_type_SHIFT 0
+#define lpfc_wqe_gen_cmd_type_MASK 0x0000000F
+#define lpfc_wqe_gen_cmd_type_WORD word11
+ uint32_t payload[4];
+};
+
+struct lpfc_rqe {
+ uint32_t address_hi;
+ uint32_t address_lo;
+};
+
+/* buffer descriptors */
+struct lpfc_bde4 {
+ uint32_t addr_hi;
+ uint32_t addr_lo;
+ uint32_t word2;
+#define lpfc_bde4_last_SHIFT 31
+#define lpfc_bde4_last_MASK 0x00000001
+#define lpfc_bde4_last_WORD word2
+#define lpfc_bde4_sge_offset_SHIFT 0
+#define lpfc_bde4_sge_offset_MASK 0x000003FF
+#define lpfc_bde4_sge_offset_WORD word2
+ uint32_t word3;
+#define lpfc_bde4_length_SHIFT 0
+#define lpfc_bde4_length_MASK 0x000000FF
+#define lpfc_bde4_length_WORD word3
+};
+
+struct lpfc_register {
+ uint32_t word0;
+};
+
+#define LPFC_UERR_STATUS_HI 0x00A4
+#define LPFC_UERR_STATUS_LO 0x00A0
+#define LPFC_ONLINE0 0x00B0
+#define LPFC_ONLINE1 0x00B4
+#define LPFC_SCRATCHPAD 0x0058
+
+/* BAR0 Registers */
+#define LPFC_HST_STATE 0x00AC
+#define lpfc_hst_state_perr_SHIFT 31
+#define lpfc_hst_state_perr_MASK 0x1
+#define lpfc_hst_state_perr_WORD word0
+#define lpfc_hst_state_sfi_SHIFT 30
+#define lpfc_hst_state_sfi_MASK 0x1
+#define lpfc_hst_state_sfi_WORD word0
+#define lpfc_hst_state_nip_SHIFT 29
+#define lpfc_hst_state_nip_MASK 0x1
+#define lpfc_hst_state_nip_WORD word0
+#define lpfc_hst_state_ipc_SHIFT 28
+#define lpfc_hst_state_ipc_MASK 0x1
+#define lpfc_hst_state_ipc_WORD word0
+#define lpfc_hst_state_xrom_SHIFT 27
+#define lpfc_hst_state_xrom_MASK 0x1
+#define lpfc_hst_state_xrom_WORD word0
+#define lpfc_hst_state_dl_SHIFT 26
+#define lpfc_hst_state_dl_MASK 0x1
+#define lpfc_hst_state_dl_WORD word0
+#define lpfc_hst_state_port_status_SHIFT 0
+#define lpfc_hst_state_port_status_MASK 0xFFFF
+#define lpfc_hst_state_port_status_WORD word0
+
+#define LPFC_POST_STAGE_POWER_ON_RESET 0x0000
+#define LPFC_POST_STAGE_AWAITING_HOST_RDY 0x0001
+#define LPFC_POST_STAGE_HOST_RDY 0x0002
+#define LPFC_POST_STAGE_BE_RESET 0x0003
+#define LPFC_POST_STAGE_SEEPROM_CS_START 0x0100
+#define LPFC_POST_STAGE_SEEPROM_CS_DONE 0x0101
+#define LPFC_POST_STAGE_DDR_CONFIG_START 0x0200
+#define LPFC_POST_STAGE_DDR_CONFIG_DONE 0x0201
+#define LPFC_POST_STAGE_DDR_CALIBRATE_START 0x0300
+#define LPFC_POST_STAGE_DDR_CALIBRATE_DONE 0x0301
+#define LPFC_POST_STAGE_DDR_TEST_START 0x0400
+#define LPFC_POST_STAGE_DDR_TEST_DONE 0x0401
+#define LPFC_POST_STAGE_REDBOOT_INIT_START 0x0600
+#define LPFC_POST_STAGE_REDBOOT_INIT_DONE 0x0601
+#define LPFC_POST_STAGE_FW_IMAGE_LOAD_START 0x0700
+#define LPFC_POST_STAGE_FW_IMAGE_LOAD_DONE 0x0701
+#define LPFC_POST_STAGE_ARMFW_START 0x0800
+#define LPFC_POST_STAGE_DHCP_QUERY_START 0x0900
+#define LPFC_POST_STAGE_DHCP_QUERY_DONE 0x0901
+#define LPFC_POST_STAGE_BOOT_TARGET_DISCOVERY_START 0x0A00
+#define LPFC_POST_STAGE_BOOT_TARGET_DISCOVERY_DONE 0x0A01
+#define LPFC_POST_STAGE_RC_OPTION_SET 0x0B00
+#define LPFC_POST_STAGE_SWITCH_LINK 0x0B01
+#define LPFC_POST_STAGE_SEND_ICDS_MESSAGE 0x0B02
+#define LPFC_POST_STAGE_PERFROM_TFTP 0x0B03
+#define LPFC_POST_STAGE_PARSE_XML 0x0B04
+#define LPFC_POST_STAGE_DOWNLOAD_IMAGE 0x0B05
+#define LPFC_POST_STAGE_FLASH_IMAGE 0x0B06
+#define LPFC_POST_STAGE_RC_DONE 0x0B07
+#define LPFC_POST_STAGE_REBOOT_SYSTEM 0x0B08
+#define LPFC_POST_STAGE_MAC_ADDRESS 0x0C00
+#define LPFC_POST_STAGE_ARMFW_READY 0xC000
+#define LPFC_POST_STAGE_ARMFW_UE 0xF000
+
+#define lpfc_scratchpad_slirev_SHIFT 4
+#define lpfc_scratchpad_slirev_MASK 0xF
+#define lpfc_scratchpad_slirev_WORD word0
+#define lpfc_scratchpad_chiptype_SHIFT 8
+#define lpfc_scratchpad_chiptype_MASK 0xFF
+#define lpfc_scratchpad_chiptype_WORD word0
+#define lpfc_scratchpad_featurelevel1_SHIFT 16
+#define lpfc_scratchpad_featurelevel1_MASK 0xFF
+#define lpfc_scratchpad_featurelevel1_WORD word0
+#define lpfc_scratchpad_featurelevel2_SHIFT 24
+#define lpfc_scratchpad_featurelevel2_MASK 0xFF
+#define lpfc_scratchpad_featurelevel2_WORD word0
+
+/* BAR1 Registers */
+#define LPFC_IMR_MASK_ALL 0xFFFFFFFF
+#define LPFC_ISCR_CLEAR_ALL 0xFFFFFFFF
+
+#define LPFC_HST_ISR0 0x0C18
+#define LPFC_HST_ISR1 0x0C1C
+#define LPFC_HST_ISR2 0x0C20
+#define LPFC_HST_ISR3 0x0C24
+#define LPFC_HST_ISR4 0x0C28
+
+#define LPFC_HST_IMR0 0x0C48
+#define LPFC_HST_IMR1 0x0C4C
+#define LPFC_HST_IMR2 0x0C50
+#define LPFC_HST_IMR3 0x0C54
+#define LPFC_HST_IMR4 0x0C58
+
+#define LPFC_HST_ISCR0 0x0C78
+#define LPFC_HST_ISCR1 0x0C7C
+#define LPFC_HST_ISCR2 0x0C80
+#define LPFC_HST_ISCR3 0x0C84
+#define LPFC_HST_ISCR4 0x0C88
+
+#define LPFC_SLI4_INTR0 BIT0
+#define LPFC_SLI4_INTR1 BIT1
+#define LPFC_SLI4_INTR2 BIT2
+#define LPFC_SLI4_INTR3 BIT3
+#define LPFC_SLI4_INTR4 BIT4
+#define LPFC_SLI4_INTR5 BIT5
+#define LPFC_SLI4_INTR6 BIT6
+#define LPFC_SLI4_INTR7 BIT7
+#define LPFC_SLI4_INTR8 BIT8
+#define LPFC_SLI4_INTR9 BIT9
+#define LPFC_SLI4_INTR10 BIT10
+#define LPFC_SLI4_INTR11 BIT11
+#define LPFC_SLI4_INTR12 BIT12
+#define LPFC_SLI4_INTR13 BIT13
+#define LPFC_SLI4_INTR14 BIT14
+#define LPFC_SLI4_INTR15 BIT15
+#define LPFC_SLI4_INTR16 BIT16
+#define LPFC_SLI4_INTR17 BIT17
+#define LPFC_SLI4_INTR18 BIT18
+#define LPFC_SLI4_INTR19 BIT19
+#define LPFC_SLI4_INTR20 BIT20
+#define LPFC_SLI4_INTR21 BIT21
+#define LPFC_SLI4_INTR22 BIT22
+#define LPFC_SLI4_INTR23 BIT23
+#define LPFC_SLI4_INTR24 BIT24
+#define LPFC_SLI4_INTR25 BIT25
+#define LPFC_SLI4_INTR26 BIT26
+#define LPFC_SLI4_INTR27 BIT27
+#define LPFC_SLI4_INTR28 BIT28
+#define LPFC_SLI4_INTR29 BIT29
+#define LPFC_SLI4_INTR30 BIT30
+#define LPFC_SLI4_INTR31 BIT31
+
+/* BAR2 Registers */
+#define LPFC_RQ_DOORBELL 0x00A0
+#define lpfc_rq_doorbell_num_posted_SHIFT 16
+#define lpfc_rq_doorbell_num_posted_MASK 0x3FFF
+#define lpfc_rq_doorbell_num_posted_WORD word0
+#define LPFC_RQ_POST_BATCH 8 /* RQEs to post at one time */
+#define lpfc_rq_doorbell_id_SHIFT 0
+#define lpfc_rq_doorbell_id_MASK 0x03FF
+#define lpfc_rq_doorbell_id_WORD word0
+
+#define LPFC_WQ_DOORBELL 0x0040
+#define lpfc_wq_doorbell_num_posted_SHIFT 24
+#define lpfc_wq_doorbell_num_posted_MASK 0x00FF
+#define lpfc_wq_doorbell_num_posted_WORD word0
+#define lpfc_wq_doorbell_index_SHIFT 16
+#define lpfc_wq_doorbell_index_MASK 0x00FF
+#define lpfc_wq_doorbell_index_WORD word0
+#define lpfc_wq_doorbell_id_SHIFT 0
+#define lpfc_wq_doorbell_id_MASK 0xFFFF
+#define lpfc_wq_doorbell_id_WORD word0
+
+#define LPFC_EQCQ_DOORBELL 0x0120
+#define lpfc_eqcq_doorbell_arm_SHIFT 29
+#define lpfc_eqcq_doorbell_arm_MASK 0x0001
+#define lpfc_eqcq_doorbell_arm_WORD word0
+#define lpfc_eqcq_doorbell_num_released_SHIFT 16
+#define lpfc_eqcq_doorbell_num_released_MASK 0x1FFF
+#define lpfc_eqcq_doorbell_num_released_WORD word0
+#define lpfc_eqcq_doorbell_qt_SHIFT 10
+#define lpfc_eqcq_doorbell_qt_MASK 0x0001
+#define lpfc_eqcq_doorbell_qt_WORD word0
+#define LPFC_QUEUE_TYPE_COMPLETION 0
+#define LPFC_QUEUE_TYPE_EVENT 1
+#define lpfc_eqcq_doorbell_eqci_SHIFT 9
+#define lpfc_eqcq_doorbell_eqci_MASK 0x0001
+#define lpfc_eqcq_doorbell_eqci_WORD word0
+#define lpfc_eqcq_doorbell_cqid_SHIFT 0
+#define lpfc_eqcq_doorbell_cqid_MASK 0x03FF
+#define lpfc_eqcq_doorbell_cqid_WORD word0
+#define lpfc_eqcq_doorbell_eqid_SHIFT 0
+#define lpfc_eqcq_doorbell_eqid_MASK 0x01FF
+#define lpfc_eqcq_doorbell_eqid_WORD word0
+
+#define LPFC_BMBX 0x0160
+#define lpfc_bmbx_addr_SHIFT 2
+#define lpfc_bmbx_addr_MASK 0x3FFFFFFF
+#define lpfc_bmbx_addr_WORD word0
+#define lpfc_bmbx_hi_SHIFT 1
+#define lpfc_bmbx_hi_MASK 0x0001
+#define lpfc_bmbx_hi_WORD word0
+#define lpfc_bmbx_rdy_SHIFT 0
+#define lpfc_bmbx_rdy_MASK 0x0001
+#define lpfc_bmbx_rdy_WORD word0
+
+#define LPFC_MQ_DOORBELL 0x0140
+#define lpfc_mq_doorbell_num_posted_SHIFT 16
+#define lpfc_mq_doorbell_num_posted_MASK 0x3FFF
+#define lpfc_mq_doorbell_num_posted_WORD word0
+#define lpfc_mq_doorbell_id_SHIFT 0
+#define lpfc_mq_doorbell_id_MASK 0x03FF
+#define lpfc_mq_doorbell_id_WORD word0
+
+struct lpfc_sli4_cfg_mhdr {
+ uint32_t word1;
+#define lpfc_mbox_hdr_emb_SHIFT 0
+#define lpfc_mbox_hdr_emb_MASK 0x00000001
+#define lpfc_mbox_hdr_emb_WORD word1
+#define lpfc_mbox_hdr_sge_cnt_SHIFT 3
+#define lpfc_mbox_hdr_sge_cnt_MASK 0x0000001F
+#define lpfc_mbox_hdr_sge_cnt_WORD word1
+ uint32_t payload_length;
+ uint32_t tag_lo;
+ uint32_t tag_hi;
+ uint32_t reserved5;
+};
+
+union lpfc_sli4_cfg_shdr {
+ struct {
+ uint32_t word6;
+#define lpfc_mbox_hdr_opcode_SHIFT 0
+#define lpfc_mbox_hdr_opcode_MASK 0x000000FF
+#define lpfc_mbox_hdr_opcode_WORD word6
+#define lpfc_mbox_hdr_subsystem_SHIFT 8
+#define lpfc_mbox_hdr_subsystem_MASK 0x000000FF
+#define lpfc_mbox_hdr_subsystem_WORD word6
+#define lpfc_mbox_hdr_port_number_SHIFT 16
+#define lpfc_mbox_hdr_port_number_MASK 0x000000FF
+#define lpfc_mbox_hdr_port_number_WORD word6
+#define lpfc_mbox_hdr_domain_SHIFT 24
+#define lpfc_mbox_hdr_domain_MASK 0x000000FF
+#define lpfc_mbox_hdr_domain_WORD word6
+ uint32_t timeout;
+ uint32_t request_length;
+ uint32_t reserved9;
+ } request;
+ struct {
+ uint32_t word6;
+#define lpfc_mbox_hdr_opcode_SHIFT 0
+#define lpfc_mbox_hdr_opcode_MASK 0x000000FF
+#define lpfc_mbox_hdr_opcode_WORD word6
+#define lpfc_mbox_hdr_subsystem_SHIFT 8
+#define lpfc_mbox_hdr_subsystem_MASK 0x000000FF
+#define lpfc_mbox_hdr_subsystem_WORD word6
+#define lpfc_mbox_hdr_domain_SHIFT 24
+#define lpfc_mbox_hdr_domain_MASK 0x000000FF
+#define lpfc_mbox_hdr_domain_WORD word6
+ uint32_t word7;
+#define lpfc_mbox_hdr_status_SHIFT 0
+#define lpfc_mbox_hdr_status_MASK 0x000000FF
+#define lpfc_mbox_hdr_status_WORD word7
+#define lpfc_mbox_hdr_add_status_SHIFT 8
+#define lpfc_mbox_hdr_add_status_MASK 0x000000FF
+#define lpfc_mbox_hdr_add_status_WORD word7
+ uint32_t response_length;
+ uint32_t actual_response_length;
+ } response;
+};
+
+/* Mailbox structures */
+struct mbox_header {
+ struct lpfc_sli4_cfg_mhdr cfg_mhdr;
+ union lpfc_sli4_cfg_shdr cfg_shdr;
+};
+
+/* Subsystem Definitions */
+#define LPFC_MBOX_SUBSYSTEM_COMMON 0x1
+#define LPFC_MBOX_SUBSYSTEM_FCOE 0xC
+
+/* Device Specific Definitions */
+
+/* The HOST ENDIAN defines are in Big Endian format. */
+#define HOST_ENDIAN_LOW_WORD0 0xFF3412FF
+#define HOST_ENDIAN_HIGH_WORD1 0xFF7856FF
+
+/* Common Opcodes */
+#define LPFC_MBOX_OPCODE_CQ_CREATE 0x0C
+#define LPFC_MBOX_OPCODE_EQ_CREATE 0x0D
+#define LPFC_MBOX_OPCODE_MQ_CREATE 0x15
+#define LPFC_MBOX_OPCODE_GET_CNTL_ATTRIBUTES 0x20
+#define LPFC_MBOX_OPCODE_NOP 0x21
+#define LPFC_MBOX_OPCODE_MQ_DESTROY 0x35
+#define LPFC_MBOX_OPCODE_CQ_DESTROY 0x36
+#define LPFC_MBOX_OPCODE_EQ_DESTROY 0x37
+#define LPFC_MBOX_OPCODE_FUNCTION_RESET 0x3D
+
+/* FCoE Opcodes */
+#define LPFC_MBOX_OPCODE_FCOE_WQ_CREATE 0x01
+#define LPFC_MBOX_OPCODE_FCOE_WQ_DESTROY 0x02
+#define LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES 0x03
+#define LPFC_MBOX_OPCODE_FCOE_REMOVE_SGL_PAGES 0x04
+#define LPFC_MBOX_OPCODE_FCOE_RQ_CREATE 0x05
+#define LPFC_MBOX_OPCODE_FCOE_RQ_DESTROY 0x06
+#define LPFC_MBOX_OPCODE_FCOE_READ_FCF_TABLE 0x08
+#define LPFC_MBOX_OPCODE_FCOE_ADD_FCF 0x09
+#define LPFC_MBOX_OPCODE_FCOE_DELETE_FCF 0x0A
+#define LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE 0x0B
+
+/* Mailbox command structures */
+struct eq_context {
+ uint32_t word0;
+#define lpfc_eq_context_size_SHIFT 31
+#define lpfc_eq_context_size_MASK 0x00000001
+#define lpfc_eq_context_size_WORD word0
+#define LPFC_EQE_SIZE_4 0x0
+#define LPFC_EQE_SIZE_16 0x1
+#define lpfc_eq_context_valid_SHIFT 29
+#define lpfc_eq_context_valid_MASK 0x00000001
+#define lpfc_eq_context_valid_WORD word0
+ uint32_t word1;
+#define lpfc_eq_context_count_SHIFT 26
+#define lpfc_eq_context_count_MASK 0x00000003
+#define lpfc_eq_context_count_WORD word1
+#define LPFC_EQ_CNT_256 0x0
+#define LPFC_EQ_CNT_512 0x1
+#define LPFC_EQ_CNT_1024 0x2
+#define LPFC_EQ_CNT_2048 0x3
+#define LPFC_EQ_CNT_4096 0x4
+ uint32_t word2;
+#define lpfc_eq_context_delay_multi_SHIFT 13
+#define lpfc_eq_context_delay_multi_MASK 0x000003FF
+#define lpfc_eq_context_delay_multi_WORD word2
+ uint32_t reserved3;
+};
+
+struct sgl_page_pairs {
+ uint32_t sgl_pg0_addr_lo;
+ uint32_t sgl_pg0_addr_hi;
+ uint32_t sgl_pg1_addr_lo;
+ uint32_t sgl_pg1_addr_hi;
+};
+
+struct lpfc_mbx_post_sgl_pages {
+ struct mbox_header header;
+ uint32_t word0;
+#define lpfc_post_sgl_pages_xri_SHIFT 0
+#define lpfc_post_sgl_pages_xri_MASK 0x0000FFFF
+#define lpfc_post_sgl_pages_xri_WORD word0
+#define lpfc_post_sgl_pages_xricnt_SHIFT 16
+#define lpfc_post_sgl_pages_xricnt_MASK 0x0000FFFF
+#define lpfc_post_sgl_pages_xricnt_WORD word0
+ struct sgl_page_pairs sgl_pg_pairs[1];
+};
+
+/* word0 of page-1 struct shares the same SHIFT/MASK/WORD defines as above */
+struct lpfc_mbx_post_uembed_sgl_page1 {
+ union lpfc_sli4_cfg_shdr cfg_shdr;
+ uint32_t word0;
+ struct sgl_page_pairs sgl_pg_pairs;
+};
+
+struct lpfc_mbx_sge {
+ uint32_t pa_lo;
+ uint32_t pa_hi;
+ uint32_t length;
+};
+
+struct lpfc_mbx_nembed_cmd {
+ struct lpfc_sli4_cfg_mhdr cfg_mhdr;
+#define LPFC_SLI4_MBX_SGE_MAX_PAGES 19
+ struct lpfc_mbx_sge sge[LPFC_SLI4_MBX_SGE_MAX_PAGES];
+};
+
+struct lpfc_mbx_nembed_sge_virt {
+ void *addr[LPFC_SLI4_MBX_SGE_MAX_PAGES];
+};
+
+struct lpfc_mbx_eq_create {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_eq_create_num_pages_SHIFT 0
+#define lpfc_mbx_eq_create_num_pages_MASK 0x0000FFFF
+#define lpfc_mbx_eq_create_num_pages_WORD word0
+ struct eq_context context;
+ struct dma_address page[LPFC_MAX_EQ_PAGE];
+ } request;
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_eq_create_q_id_SHIFT 0
+#define lpfc_mbx_eq_create_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_eq_create_q_id_WORD word0
+ } response;
+ } u;
+};
+
+struct lpfc_mbx_eq_destroy {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_eq_destroy_q_id_SHIFT 0
+#define lpfc_mbx_eq_destroy_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_eq_destroy_q_id_WORD word0
+ } request;
+ struct {
+ uint32_t word0;
+ } response;
+ } u;
+};
+
+struct lpfc_mbx_nop {
+ struct mbox_header header;
+ uint32_t context[2];
+};
+
+struct cq_context {
+ uint32_t word0;
+#define lpfc_cq_context_event_SHIFT 31
+#define lpfc_cq_context_event_MASK 0x00000001
+#define lpfc_cq_context_event_WORD word0
+#define lpfc_cq_context_valid_SHIFT 29
+#define lpfc_cq_context_valid_MASK 0x00000001
+#define lpfc_cq_context_valid_WORD word0
+#define lpfc_cq_context_count_SHIFT 27
+#define lpfc_cq_context_count_MASK 0x00000003
+#define lpfc_cq_context_count_WORD word0
+#define LPFC_CQ_CNT_256 0x0
+#define LPFC_CQ_CNT_512 0x1
+#define LPFC_CQ_CNT_1024 0x2
+ uint32_t word1;
+#define lpfc_cq_eq_id_SHIFT 22
+#define lpfc_cq_eq_id_MASK 0x000000FF
+#define lpfc_cq_eq_id_WORD word1
+ uint32_t reserved0;
+ uint32_t reserved1;
+};
+
+struct lpfc_mbx_cq_create {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_cq_create_num_pages_SHIFT 0
+#define lpfc_mbx_cq_create_num_pages_MASK 0x0000FFFF
+#define lpfc_mbx_cq_create_num_pages_WORD word0
+ struct cq_context context;
+ struct dma_address page[LPFC_MAX_CQ_PAGE];
+ } request;
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_cq_create_q_id_SHIFT 0
+#define lpfc_mbx_cq_create_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_cq_create_q_id_WORD word0
+ } response;
+ } u;
+};
+
+struct lpfc_mbx_cq_destroy {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_cq_destroy_q_id_SHIFT 0
+#define lpfc_mbx_cq_destroy_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_cq_destroy_q_id_WORD word0
+ } request;
+ struct {
+ uint32_t word0;
+ } response;
+ } u;
+};
+
+struct wq_context {
+ uint32_t reserved0;
+ uint32_t reserved1;
+ uint32_t reserved2;
+ uint32_t reserved3;
+};
+
+struct lpfc_mbx_wq_create {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_wq_create_num_pages_SHIFT 0
+#define lpfc_mbx_wq_create_num_pages_MASK 0x0000FFFF
+#define lpfc_mbx_wq_create_num_pages_WORD word0
+#define lpfc_mbx_wq_create_cq_id_SHIFT 16
+#define lpfc_mbx_wq_create_cq_id_MASK 0x0000FFFF
+#define lpfc_mbx_wq_create_cq_id_WORD word0
+ struct dma_address page[LPFC_MAX_WQ_PAGE];
+ } request;
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_wq_create_q_id_SHIFT 0
+#define lpfc_mbx_wq_create_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_wq_create_q_id_WORD word0
+ } response;
+ } u;
+};
+
+struct lpfc_mbx_wq_destroy {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_wq_destroy_q_id_SHIFT 0
+#define lpfc_mbx_wq_destroy_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_wq_destroy_q_id_WORD word0
+ } request;
+ struct {
+ uint32_t word0;
+ } response;
+ } u;
+};
+
+#define LPFC_HDR_BUF_SIZE 128
+#define LPFC_DATA_BUF_SIZE 4096
+struct rq_context {
+ uint32_t word0;
+#define lpfc_rq_context_rq_size_SHIFT 16
+#define lpfc_rq_context_rq_size_MASK 0x0000000F
+#define lpfc_rq_context_rq_size_WORD word0
+#define LPFC_RQ_RING_SIZE_512 9 /* 512 entries */
+#define LPFC_RQ_RING_SIZE_1024 10 /* 1024 entries */
+#define LPFC_RQ_RING_SIZE_2048 11 /* 2048 entries */
+#define LPFC_RQ_RING_SIZE_4096 12 /* 4096 entries */
+ uint32_t reserved1;
+ uint32_t word2;
+#define lpfc_rq_context_cq_id_SHIFT 16
+#define lpfc_rq_context_cq_id_MASK 0x000003FF
+#define lpfc_rq_context_cq_id_WORD word2
+#define lpfc_rq_context_buf_size_SHIFT 0
+#define lpfc_rq_context_buf_size_MASK 0x0000FFFF
+#define lpfc_rq_context_buf_size_WORD word2
+ uint32_t reserved3;
+};
+
+struct lpfc_mbx_rq_create {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_rq_create_num_pages_SHIFT 0
+#define lpfc_mbx_rq_create_num_pages_MASK 0x0000FFFF
+#define lpfc_mbx_rq_create_num_pages_WORD word0
+ struct rq_context context;
+ struct dma_address page[LPFC_MAX_WQ_PAGE];
+ } request;
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_rq_create_q_id_SHIFT 0
+#define lpfc_mbx_rq_create_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_rq_create_q_id_WORD word0
+ } response;
+ } u;
+};
+
+struct lpfc_mbx_rq_destroy {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_rq_destroy_q_id_SHIFT 0
+#define lpfc_mbx_rq_destroy_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_rq_destroy_q_id_WORD word0
+ } request;
+ struct {
+ uint32_t word0;
+ } response;
+ } u;
+};
+
+struct mq_context {
+ uint32_t word0;
+#define lpfc_mq_context_cq_id_SHIFT 22
+#define lpfc_mq_context_cq_id_MASK 0x000003FF
+#define lpfc_mq_context_cq_id_WORD word0
+#define lpfc_mq_context_count_SHIFT 16
+#define lpfc_mq_context_count_MASK 0x0000000F
+#define lpfc_mq_context_count_WORD word0
+#define LPFC_MQ_CNT_16 0x5
+#define LPFC_MQ_CNT_32 0x6
+#define LPFC_MQ_CNT_64 0x7
+#define LPFC_MQ_CNT_128 0x8
+ uint32_t word1;
+#define lpfc_mq_context_valid_SHIFT 31
+#define lpfc_mq_context_valid_MASK 0x00000001
+#define lpfc_mq_context_valid_WORD word1
+ uint32_t reserved2;
+ uint32_t reserved3;
+};
+
+struct lpfc_mbx_mq_create {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_mq_create_num_pages_SHIFT 0
+#define lpfc_mbx_mq_create_num_pages_MASK 0x0000FFFF
+#define lpfc_mbx_mq_create_num_pages_WORD word0
+ struct mq_context context;
+ struct dma_address page[LPFC_MAX_MQ_PAGE];
+ } request;
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_mq_create_q_id_SHIFT 0
+#define lpfc_mbx_mq_create_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_mq_create_q_id_WORD word0
+ } response;
+ } u;
+};
+
+struct lpfc_mbx_mq_destroy {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_mq_destroy_q_id_SHIFT 0
+#define lpfc_mbx_mq_destroy_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_mq_destroy_q_id_WORD word0
+ } request;
+ struct {
+ uint32_t word0;
+ } response;
+ } u;
+};
+
+struct lpfc_mbx_post_hdr_tmpl {
+ struct mbox_header header;
+ uint32_t word10;
+#define lpfc_mbx_post_hdr_tmpl_rpi_offset_SHIFT 0
+#define lpfc_mbx_post_hdr_tmpl_rpi_offset_MASK 0x0000FFFF
+#define lpfc_mbx_post_hdr_tmpl_rpi_offset_WORD word10
+#define lpfc_mbx_post_hdr_tmpl_page_cnt_SHIFT 16
+#define lpfc_mbx_post_hdr_tmpl_page_cnt_MASK 0x0000FFFF
+#define lpfc_mbx_post_hdr_tmpl_page_cnt_WORD word10
+ uint32_t rpi_paddr_lo;
+ uint32_t rpi_paddr_hi;
+};
+
+struct sli4_sge { /* SLI-4 */
+ uint32_t addr_hi;
+ uint32_t addr_lo;
+
+ uint32_t word2;
+#define lpfc_sli4_sge_offset_SHIFT 0 /* Offset of buffer - Not used*/
+#define lpfc_sli4_sge_offset_MASK 0x00FFFFFF
+#define lpfc_sli4_sge_offset_WORD word2
+#define lpfc_sli4_sge_last_SHIFT 31 /* Last SEG in the SGL sets
+ this flag !! */
+#define lpfc_sli4_sge_last_MASK 0x00000001
+#define lpfc_sli4_sge_last_WORD word2
+ uint32_t word3;
+#define lpfc_sli4_sge_len_SHIFT 0
+#define lpfc_sli4_sge_len_MASK 0x0001FFFF
+#define lpfc_sli4_sge_len_WORD word3
+};
+
+struct fcf_record {
+ uint32_t max_rcv_size;
+ uint32_t fka_adv_period;
+ uint32_t fip_priority;
+ uint32_t word3;
+#define lpfc_fcf_record_mac_0_SHIFT 0
+#define lpfc_fcf_record_mac_0_MASK 0x000000FF
+#define lpfc_fcf_record_mac_0_WORD word3
+#define lpfc_fcf_record_mac_1_SHIFT 8
+#define lpfc_fcf_record_mac_1_MASK 0x000000FF
+#define lpfc_fcf_record_mac_1_WORD word3
+#define lpfc_fcf_record_mac_2_SHIFT 16
+#define lpfc_fcf_record_mac_2_MASK 0x000000FF
+#define lpfc_fcf_record_mac_2_WORD word3
+#define lpfc_fcf_record_mac_3_SHIFT 24
+#define lpfc_fcf_record_mac_3_MASK 0x000000FF
+#define lpfc_fcf_record_mac_3_WORD word3
+ uint32_t word4;
+#define lpfc_fcf_record_mac_4_SHIFT 0
+#define lpfc_fcf_record_mac_4_MASK 0x000000FF
+#define lpfc_fcf_record_mac_4_WORD word4
+#define lpfc_fcf_record_mac_5_SHIFT 8
+#define lpfc_fcf_record_mac_5_MASK 0x000000FF
+#define lpfc_fcf_record_mac_5_WORD word4
+#define lpfc_fcf_record_fcf_avail_SHIFT 16
+#define lpfc_fcf_record_fcf_avail_MASK 0x000000FF
+#define lpfc_fcf_record_fc_avail_WORD word4
+#define lpfc_fcf_record_mac_addr_prov_SHIFT 24
+#define lpfc_fcf_record_mac_addr_prov_MASK 0x000000FF
+#define lpfc_fcf_record_mac_addr_prov_WORD word4
+#define LPFC_FCF_FPMA 1 /* Fabric Provided MAC Address */
+#define LPFC_FCF_SPMA 2 /* Server Provided MAC Address */
+ uint32_t word5;
+#define lpfc_fcf_record_fab_name_0_SHIFT 0
+#define lpfc_fcf_record_fab_name_0_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_0_WORD word5
+#define lpfc_fcf_record_fab_name_1_SHIFT 8
+#define lpfc_fcf_record_fab_name_1_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_1_WORD word5
+#define lpfc_fcf_record_fab_name_2_SHIFT 16
+#define lpfc_fcf_record_fab_name_2_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_2_WORD word5
+#define lpfc_fcf_record_fab_name_3_SHIFT 24
+#define lpfc_fcf_record_fab_name_3_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_3_WORD word5
+ uint32_t word6;
+#define lpfc_fcf_record_fab_name_4_SHIFT 0
+#define lpfc_fcf_record_fab_name_4_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_4_WORD word6
+#define lpfc_fcf_record_fab_name_5_SHIFT 8
+#define lpfc_fcf_record_fab_name_5_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_5_WORD word6
+#define lpfc_fcf_record_fab_name_6_SHIFT 16
+#define lpfc_fcf_record_fab_name_6_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_6_WORD word6
+#define lpfc_fcf_record_fab_name_7_SHIFT 24
+#define lpfc_fcf_record_fab_name_7_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_7_WORD word6
+ uint32_t word7;
+#define lpfc_fcf_record_fc_map_0_SHIFT 0
+#define lpfc_fcf_record_fc_map_0_MASK 0x000000FF
+#define lpfc_fcf_record_fc_map_0_WORD word7
+#define lpfc_fcf_record_fc_map_1_SHIFT 8
+#define lpfc_fcf_record_fc_map_1_MASK 0x000000FF
+#define lpfc_fcf_record_fc_map_1_WORD word7
+#define lpfc_fcf_record_fc_map_2_SHIFT 16
+#define lpfc_fcf_record_fc_map_2_MASK 0x000000FF
+#define lpfc_fcf_record_fc_map_2_WORD word7
+#define lpfc_fcf_record_fcf_valid_SHIFT 24
+#define lpfc_fcf_record_fcf_valid_MASK 0x000000FF
+#define lpfc_fcf_record_fcf_valid_WORD word7
+ uint32_t word8;
+#define lpfc_fcf_record_fcf_index_SHIFT 0
+#define lpfc_fcf_record_fcf_index_MASK 0x0000FFFF
+#define lpfc_fcf_record_fcf_index_WORD word8
+#define lpfc_fcf_record_fcf_state_SHIFT 16
+#define lpfc_fcf_record_fcf_state_MASK 0x0000FFFF
+#define lpfc_fcf_record_fcf_state_WORD word8
+ uint8_t vlan_bitmap[512];
+};
+
+struct lpfc_mbx_read_fcf_tbl {
+ union lpfc_sli4_cfg_shdr cfg_shdr;
+ union {
+ struct {
+ uint32_t word10;
+#define lpfc_mbx_read_fcf_tbl_indx_SHIFT 0
+#define lpfc_mbx_read_fcf_tbl_indx_MASK 0x0000FFFF
+#define lpfc_mbx_read_fcf_tbl_indx_WORD word10
+ } request;
+ struct {
+ uint32_t eventag;
+ } response;
+ } u;
+ uint32_t word11;
+#define lpfc_mbx_read_fcf_tbl_nxt_vindx_SHIFT 0
+#define lpfc_mbx_read_fcf_tbl_nxt_vindx_MASK 0x0000FFFF
+#define lpfc_mbx_read_fcf_tbl_nxt_vindx_WORD word11
+};
+
+struct lpfc_mbx_add_fcf_tbl_entry {
+ union lpfc_sli4_cfg_shdr cfg_shdr;
+ uint32_t word10;
+#define lpfc_mbx_add_fcf_tbl_fcfi_SHIFT 0
+#define lpfc_mbx_add_fcf_tbl_fcfi_MASK 0x0000FFFF
+#define lpfc_mbx_add_fcf_tbl_fcfi_WORD word10
+ struct lpfc_mbx_sge fcf_sge;
+};
+
+struct lpfc_mbx_del_fcf_tbl_entry {
+ struct mbox_header header;
+ uint32_t word10;
+#define lpfc_mbx_del_fcf_tbl_count_SHIFT 0
+#define lpfc_mbx_del_fcf_tbl_count_MASK 0x0000FFFF
+#define lpfc_mbx_del_fcf_tbl_count_WORD word10
+#define lpfc_mbx_del_fcf_tbl_index_SHIFT 16
+#define lpfc_mbx_del_fcf_tbl_index_MASK 0x0000FFFF
+#define lpfc_mbx_del_fcf_tbl_index_WORD word10
+};
+
+/* Status field for embedded SLI_CONFIG mailbox command */
+#define STATUS_SUCCESS 0x0
+#define STATUS_FAILED 0x1
+#define STATUS_ILLEGAL_REQUEST 0x2
+#define STATUS_ILLEGAL_FIELD 0x3
+#define STATUS_INSUFFICIENT_BUFFER 0x4
+#define STATUS_UNAUTHORIZED_REQUEST 0x5
+#define STATUS_FLASHROM_SAVE_FAILED 0x17
+#define STATUS_FLASHROM_RESTORE_FAILED 0x18
+#define STATUS_ICCBINDEX_ALLOC_FAILED 0x1a
+#define STATUS_IOCTLHANDLE_ALLOC_FAILED 0x1b
+#define STATUS_INVALID_PHY_ADDR_FROM_OSM 0x1c
+#define STATUS_INVALID_PHY_ADDR_LEN_FROM_OSM 0x1d
+#define STATUS_ASSERT_FAILED 0x1e
+#define STATUS_INVALID_SESSION 0x1f
+#define STATUS_INVALID_CONNECTION 0x20
+#define STATUS_BTL_PATH_EXCEEDS_OSM_LIMIT 0x21
+#define STATUS_BTL_NO_FREE_SLOT_PATH 0x24
+#define STATUS_BTL_NO_FREE_SLOT_TGTID 0x25
+#define STATUS_OSM_DEVSLOT_NOT_FOUND 0x26
+#define STATUS_FLASHROM_READ_FAILED 0x27
+#define STATUS_POLL_IOCTL_TIMEOUT 0x28
+#define STATUS_ERROR_ACITMAIN 0x2a
+#define STATUS_REBOOT_REQUIRED 0x2c
+#define STATUS_FCF_IN_USE 0x3a
+
+struct lpfc_mbx_sli4_config {
+ struct mbox_header header;
+};
+
+struct lpfc_mbx_init_vfi {
+ uint32_t word1;
+#define lpfc_init_vfi_vr_SHIFT 31
+#define lpfc_init_vfi_vr_MASK 0x00000001
+#define lpfc_init_vfi_vr_WORD word1
+#define lpfc_init_vfi_vt_SHIFT 30
+#define lpfc_init_vfi_vt_MASK 0x00000001
+#define lpfc_init_vfi_vt_WORD word1
+#define lpfc_init_vfi_vf_SHIFT 29
+#define lpfc_init_vfi_vf_MASK 0x00000001
+#define lpfc_init_vfi_vf_WORD word1
+#define lpfc_init_vfi_vfi_SHIFT 0
+#define lpfc_init_vfi_vfi_MASK 0x0000FFFF
+#define lpfc_init_vfi_vfi_WORD word1
+ uint32_t word2;
+#define lpfc_init_vfi_fcfi_SHIFT 0
+#define lpfc_init_vfi_fcfi_MASK 0x0000FFFF
+#define lpfc_init_vfi_fcfi_WORD word2
+ uint32_t word3;
+#define lpfc_init_vfi_pri_SHIFT 13
+#define lpfc_init_vfi_pri_MASK 0x00000007
+#define lpfc_init_vfi_pri_WORD word3
+#define lpfc_init_vfi_vf_id_SHIFT 1
+#define lpfc_init_vfi_vf_id_MASK 0x00000FFF
+#define lpfc_init_vfi_vf_id_WORD word3
+ uint32_t word4;
+#define lpfc_init_vfi_hop_count_SHIFT 24
+#define lpfc_init_vfi_hop_count_MASK 0x000000FF
+#define lpfc_init_vfi_hop_count_WORD word4
+};
+
+struct lpfc_mbx_reg_vfi {
+ uint32_t word1;
+#define lpfc_reg_vfi_vp_SHIFT 28
+#define lpfc_reg_vfi_vp_MASK 0x00000001
+#define lpfc_reg_vfi_vp_WORD word1
+#define lpfc_reg_vfi_vfi_SHIFT 0
+#define lpfc_reg_vfi_vfi_MASK 0x0000FFFF
+#define lpfc_reg_vfi_vfi_WORD word1
+ uint32_t word2;
+#define lpfc_reg_vfi_vpi_SHIFT 16
+#define lpfc_reg_vfi_vpi_MASK 0x0000FFFF
+#define lpfc_reg_vfi_vpi_WORD word2
+#define lpfc_reg_vfi_fcfi_SHIFT 0
+#define lpfc_reg_vfi_fcfi_MASK 0x0000FFFF
+#define lpfc_reg_vfi_fcfi_WORD word2
+ uint32_t word3_rsvd;
+ uint32_t word4_rsvd;
+ struct ulp_bde64 bde;
+ uint32_t word8_rsvd;
+ uint32_t word9_rsvd;
+ uint32_t word10;
+#define lpfc_reg_vfi_nport_id_SHIFT 0
+#define lpfc_reg_vfi_nport_id_MASK 0x00FFFFFF
+#define lpfc_reg_vfi_nport_id_WORD word10
+};
+
+struct lpfc_mbx_init_vpi {
+ uint32_t word1;
+#define lpfc_init_vpi_vfi_SHIFT 16
+#define lpfc_init_vpi_vfi_MASK 0x0000FFFF
+#define lpfc_init_vpi_vfi_WORD word1
+#define lpfc_init_vpi_vpi_SHIFT 0
+#define lpfc_init_vpi_vpi_MASK 0x0000FFFF
+#define lpfc_init_vpi_vpi_WORD word1
+};
+
+struct lpfc_mbx_read_vpi {
+ uint32_t word1_rsvd;
+ uint32_t word2;
+#define lpfc_mbx_read_vpi_vnportid_SHIFT 0
+#define lpfc_mbx_read_vpi_vnportid_MASK 0x00FFFFFF
+#define lpfc_mbx_read_vpi_vnportid_WORD word2
+ uint32_t word3_rsvd;
+ uint32_t word4;
+#define lpfc_mbx_read_vpi_acq_alpa_SHIFT 0
+#define lpfc_mbx_read_vpi_acq_alpa_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_acq_alpa_WORD word4
+#define lpfc_mbx_read_vpi_pb_SHIFT 15
+#define lpfc_mbx_read_vpi_pb_MASK 0x00000001
+#define lpfc_mbx_read_vpi_pb_WORD word4
+#define lpfc_mbx_read_vpi_spec_alpa_SHIFT 16
+#define lpfc_mbx_read_vpi_spec_alpa_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_spec_alpa_WORD word4
+#define lpfc_mbx_read_vpi_ns_SHIFT 30
+#define lpfc_mbx_read_vpi_ns_MASK 0x00000001
+#define lpfc_mbx_read_vpi_ns_WORD word4
+#define lpfc_mbx_read_vpi_hl_SHIFT 31
+#define lpfc_mbx_read_vpi_hl_MASK 0x00000001
+#define lpfc_mbx_read_vpi_hl_WORD word4
+ uint32_t word5_rsvd;
+ uint32_t word6;
+#define lpfc_mbx_read_vpi_vpi_SHIFT 0
+#define lpfc_mbx_read_vpi_vpi_MASK 0x0000FFFF
+#define lpfc_mbx_read_vpi_vpi_WORD word6
+ uint32_t word7;
+#define lpfc_mbx_read_vpi_mac_0_SHIFT 0
+#define lpfc_mbx_read_vpi_mac_0_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_mac_0_WORD word7
+#define lpfc_mbx_read_vpi_mac_1_SHIFT 8
+#define lpfc_mbx_read_vpi_mac_1_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_mac_1_WORD word7
+#define lpfc_mbx_read_vpi_mac_2_SHIFT 16
+#define lpfc_mbx_read_vpi_mac_2_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_mac_2_WORD word7
+#define lpfc_mbx_read_vpi_mac_3_SHIFT 24
+#define lpfc_mbx_read_vpi_mac_3_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_mac_3_WORD word7
+ uint32_t word8;
+#define lpfc_mbx_read_vpi_mac_4_SHIFT 0
+#define lpfc_mbx_read_vpi_mac_4_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_mac_4_WORD word8
+#define lpfc_mbx_read_vpi_mac_5_SHIFT 8
+#define lpfc_mbx_read_vpi_mac_5_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_mac_5_WORD word8
+#define lpfc_mbx_read_vpi_vlan_tag_SHIFT 16
+#define lpfc_mbx_read_vpi_vlan_tag_MASK 0x00000FFF
+#define lpfc_mbx_read_vpi_vlan_tag_WORD word8
+#define lpfc_mbx_read_vpi_vv_SHIFT 28
+#define lpfc_mbx_read_vpi_vv_MASK 0x0000001
+#define lpfc_mbx_read_vpi_vv_WORD word8
+};
+
+struct lpfc_mbx_unreg_vfi {
+ uint32_t word1_rsvd;
+ uint32_t word2;
+#define lpfc_unreg_vfi_vfi_SHIFT 0
+#define lpfc_unreg_vfi_vfi_MASK 0x0000FFFF
+#define lpfc_unreg_vfi_vfi_WORD word2
+};
+
+struct lpfc_mbx_resume_rpi {
+ uint32_t word1;
+#define lpfc_resume_rpi_rpi_SHIFT 0
+#define lpfc_resume_rpi_rpi_MASK 0x0000FFFF
+#define lpfc_resume_rpi_rpi_WORD word1
+ uint32_t event_tag;
+ uint32_t word3_rsvd;
+ uint32_t word4_rsvd;
+ uint32_t word5_rsvd;
+ uint32_t word6;
+#define lpfc_resume_rpi_vpi_SHIFT 0
+#define lpfc_resume_rpi_vpi_MASK 0x0000FFFF
+#define lpfc_resume_rpi_vpi_WORD word6
+#define lpfc_resume_rpi_vfi_SHIFT 16
+#define lpfc_resume_rpi_vfi_MASK 0x0000FFFF
+#define lpfc_resume_rpi_vfi_WORD word6
+};
+
+#define REG_FCF_INVALID_QID 0xFFFF
+struct lpfc_mbx_reg_fcfi {
+ uint32_t word1;
+#define lpfc_reg_fcfi_info_index_SHIFT 0
+#define lpfc_reg_fcfi_info_index_MASK 0x0000FFFF
+#define lpfc_reg_fcfi_info_index_WORD word1
+#define lpfc_reg_fcfi_fcfi_SHIFT 16
+#define lpfc_reg_fcfi_fcfi_MASK 0x0000FFFF
+#define lpfc_reg_fcfi_fcfi_WORD word1
+ uint32_t word2;
+#define lpfc_reg_fcfi_rq_id1_SHIFT 0
+#define lpfc_reg_fcfi_rq_id1_MASK 0x0000FFFF
+#define lpfc_reg_fcfi_rq_id1_WORD word2
+#define lpfc_reg_fcfi_rq_id0_SHIFT 16
+#define lpfc_reg_fcfi_rq_id0_MASK 0x0000FFFF
+#define lpfc_reg_fcfi_rq_id0_WORD word2
+ uint32_t word3;
+#define lpfc_reg_fcfi_rq_id3_SHIFT 0
+#define lpfc_reg_fcfi_rq_id3_MASK 0x0000FFFF
+#define lpfc_reg_fcfi_rq_id3_WORD word3
+#define lpfc_reg_fcfi_rq_id2_SHIFT 16
+#define lpfc_reg_fcfi_rq_id2_MASK 0x0000FFFF
+#define lpfc_reg_fcfi_rq_id2_WORD word3
+ uint32_t word4;
+#define lpfc_reg_fcfi_type_match0_SHIFT 24
+#define lpfc_reg_fcfi_type_match0_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_match0_WORD word4
+#define lpfc_reg_fcfi_type_mask0_SHIFT 16
+#define lpfc_reg_fcfi_type_mask0_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_mask0_WORD word4
+#define lpfc_reg_fcfi_rctl_match0_SHIFT 8
+#define lpfc_reg_fcfi_rctl_match0_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_match0_WORD word4
+#define lpfc_reg_fcfi_rctl_mask0_SHIFT 0
+#define lpfc_reg_fcfi_rctl_mask0_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_mask0_WORD word4
+ uint32_t word5;
+#define lpfc_reg_fcfi_type_match1_SHIFT 24
+#define lpfc_reg_fcfi_type_match1_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_match1_WORD word5
+#define lpfc_reg_fcfi_type_mask1_SHIFT 16
+#define lpfc_reg_fcfi_type_mask1_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_mask1_WORD word5
+#define lpfc_reg_fcfi_rctl_match1_SHIFT 8
+#define lpfc_reg_fcfi_rctl_match1_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_match1_WORD word5
+#define lpfc_reg_fcfi_rctl_mask1_SHIFT 0
+#define lpfc_reg_fcfi_rctl_mask1_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_mask1_WORD word5
+ uint32_t word6;
+#define lpfc_reg_fcfi_type_match2_SHIFT 24
+#define lpfc_reg_fcfi_type_match2_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_match2_WORD word6
+#define lpfc_reg_fcfi_type_mask2_SHIFT 16
+#define lpfc_reg_fcfi_type_mask2_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_mask2_WORD word6
+#define lpfc_reg_fcfi_rctl_match2_SHIFT 8
+#define lpfc_reg_fcfi_rctl_match2_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_match2_WORD word6
+#define lpfc_reg_fcfi_rctl_mask2_SHIFT 0
+#define lpfc_reg_fcfi_rctl_mask2_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_mask2_WORD word6
+ uint32_t word7;
+#define lpfc_reg_fcfi_type_match3_SHIFT 24
+#define lpfc_reg_fcfi_type_match3_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_match3_WORD word7
+#define lpfc_reg_fcfi_type_mask3_SHIFT 16
+#define lpfc_reg_fcfi_type_mask3_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_mask3_WORD word7
+#define lpfc_reg_fcfi_rctl_match3_SHIFT 8
+#define lpfc_reg_fcfi_rctl_match3_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_match3_WORD word7
+#define lpfc_reg_fcfi_rctl_mask3_SHIFT 0
+#define lpfc_reg_fcfi_rctl_mask3_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_mask3_WORD word7
+ uint32_t word8;
+#define lpfc_reg_fcfi_mam_SHIFT 13
+#define lpfc_reg_fcfi_mam_MASK 0x00000003
+#define lpfc_reg_fcfi_mam_WORD word8
+#define LPFC_MAM_BOTH 0 /* Both SPMA and FPMA */
+#define LPFC_MAM_SPMA 1 /* Server Provided MAC Address */
+#define LPFC_MAM_FPMA 2 /* Fabric Provided MAC Address */
+#define lpfc_reg_fcfi_vv_SHIFT 12
+#define lpfc_reg_fcfi_vv_MASK 0x00000001
+#define lpfc_reg_fcfi_vv_WORD word8
+#define lpfc_reg_fcfi_vlan_tag_SHIFT 0
+#define lpfc_reg_fcfi_vlan_tag_MASK 0x00000FFF
+#define lpfc_reg_fcfi_vlan_tag_WORD word8
+};
+
+struct lpfc_mbx_unreg_fcfi {
+ uint32_t word1_rsv;
+ uint32_t word2;
+#define lpfc_unreg_fcfi_SHIFT 0
+#define lpfc_unreg_fcfi_MASK 0x0000FFFF
+#define lpfc_unreg_fcfi_WORD word2
+};
+
+struct lpfc_mbx_read_rev {
+ uint32_t word1;
+#define lpfc_mbx_rd_rev_sli_lvl_SHIFT 16
+#define lpfc_mbx_rd_rev_sli_lvl_MASK 0x0000000F
+#define lpfc_mbx_rd_rev_sli_lvl_WORD word1
+#define lpfc_mbx_rd_rev_fcoe_SHIFT 20
+#define lpfc_mbx_rd_rev_fcoe_MASK 0x00000001
+#define lpfc_mbx_rd_rev_fcoe_WORD word1
+#define lpfc_mbx_rd_rev_vpd_SHIFT 29
+#define lpfc_mbx_rd_rev_vpd_MASK 0x00000001
+#define lpfc_mbx_rd_rev_vpd_WORD word1
+ uint32_t first_hw_rev;
+ uint32_t second_hw_rev;
+ uint32_t word4_rsvd;
+ uint32_t third_hw_rev;
+ uint32_t word6;
+#define lpfc_mbx_rd_rev_fcph_low_SHIFT 0
+#define lpfc_mbx_rd_rev_fcph_low_MASK 0x000000FF
+#define lpfc_mbx_rd_rev_fcph_low_WORD word6
+#define lpfc_mbx_rd_rev_fcph_high_SHIFT 8
+#define lpfc_mbx_rd_rev_fcph_high_MASK 0x000000FF
+#define lpfc_mbx_rd_rev_fcph_high_WORD word6
+#define lpfc_mbx_rd_rev_ftr_lvl_low_SHIFT 16
+#define lpfc_mbx_rd_rev_ftr_lvl_low_MASK 0x000000FF
+#define lpfc_mbx_rd_rev_ftr_lvl_low_WORD word6
+#define lpfc_mbx_rd_rev_ftr_lvl_high_SHIFT 24
+#define lpfc_mbx_rd_rev_ftr_lvl_high_MASK 0x000000FF
+#define lpfc_mbx_rd_rev_ftr_lvl_high_WORD word6
+ uint32_t word7_rsvd;
+ uint32_t fw_id_rev;
+ uint8_t fw_name[16];
+ uint32_t ulp_fw_id_rev;
+ uint8_t ulp_fw_name[16];
+ uint32_t word18_47_rsvd[30];
+ uint32_t word48;
+#define lpfc_mbx_rd_rev_avail_len_SHIFT 0
+#define lpfc_mbx_rd_rev_avail_len_MASK 0x00FFFFFF
+#define lpfc_mbx_rd_rev_avail_len_WORD word48
+ uint32_t vpd_paddr_low;
+ uint32_t vpd_paddr_high;
+ uint32_t avail_vpd_len;
+ uint32_t rsvd_52_63[12];
+};
+
+struct lpfc_mbx_read_config {
+ uint32_t word1;
+#define lpfc_mbx_rd_conf_max_bbc_SHIFT 0
+#define lpfc_mbx_rd_conf_max_bbc_MASK 0x000000FF
+#define lpfc_mbx_rd_conf_max_bbc_WORD word1
+#define lpfc_mbx_rd_conf_init_bbc_SHIFT 8
+#define lpfc_mbx_rd_conf_init_bbc_MASK 0x000000FF
+#define lpfc_mbx_rd_conf_init_bbc_WORD word1
+ uint32_t word2;
+#define lpfc_mbx_rd_conf_nport_did_SHIFT 0
+#define lpfc_mbx_rd_conf_nport_did_MASK 0x00FFFFFF
+#define lpfc_mbx_rd_conf_nport_did_WORD word2
+#define lpfc_mbx_rd_conf_topology_SHIFT 24
+#define lpfc_mbx_rd_conf_topology_MASK 0x000000FF
+#define lpfc_mbx_rd_conf_topology_WORD word2
+ uint32_t word3;
+#define lpfc_mbx_rd_conf_ao_SHIFT 0
+#define lpfc_mbx_rd_conf_ao_MASK 0x00000001
+#define lpfc_mbx_rd_conf_ao_WORD word3
+#define lpfc_mbx_rd_conf_bb_scn_SHIFT 8
+#define lpfc_mbx_rd_conf_bb_scn_MASK 0x0000000F
+#define lpfc_mbx_rd_conf_bb_scn_WORD word3
+#define lpfc_mbx_rd_conf_cbb_scn_SHIFT 12
+#define lpfc_mbx_rd_conf_cbb_scn_MASK 0x0000000F
+#define lpfc_mbx_rd_conf_cbb_scn_WORD word3
+#define lpfc_mbx_rd_conf_mc_SHIFT 29
+#define lpfc_mbx_rd_conf_mc_MASK 0x00000001
+#define lpfc_mbx_rd_conf_mc_WORD word3
+ uint32_t word4;
+#define lpfc_mbx_rd_conf_e_d_tov_SHIFT 0
+#define lpfc_mbx_rd_conf_e_d_tov_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_e_d_tov_WORD word4
+ uint32_t word5;
+#define lpfc_mbx_rd_conf_lp_tov_SHIFT 0
+#define lpfc_mbx_rd_conf_lp_tov_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_lp_tov_WORD word5
+ uint32_t word6;
+#define lpfc_mbx_rd_conf_r_a_tov_SHIFT 0
+#define lpfc_mbx_rd_conf_r_a_tov_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_r_a_tov_WORD word6
+ uint32_t word7;
+#define lpfc_mbx_rd_conf_r_t_tov_SHIFT 0
+#define lpfc_mbx_rd_conf_r_t_tov_MASK 0x000000FF
+#define lpfc_mbx_rd_conf_r_t_tov_WORD word7
+ uint32_t word8;
+#define lpfc_mbx_rd_conf_al_tov_SHIFT 0
+#define lpfc_mbx_rd_conf_al_tov_MASK 0x0000000F
+#define lpfc_mbx_rd_conf_al_tov_WORD word8
+ uint32_t word9;
+#define lpfc_mbx_rd_conf_lmt_SHIFT 0
+#define lpfc_mbx_rd_conf_lmt_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_lmt_WORD word9
+ uint32_t word10;
+#define lpfc_mbx_rd_conf_max_alpa_SHIFT 0
+#define lpfc_mbx_rd_conf_max_alpa_MASK 0x000000FF
+#define lpfc_mbx_rd_conf_max_alpa_WORD word10
+ uint32_t word11_rsvd;
+ uint32_t word12;
+#define lpfc_mbx_rd_conf_xri_base_SHIFT 0
+#define lpfc_mbx_rd_conf_xri_base_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_xri_base_WORD word12
+#define lpfc_mbx_rd_conf_xri_count_SHIFT 16
+#define lpfc_mbx_rd_conf_xri_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_xri_count_WORD word12
+ uint32_t word13;
+#define lpfc_mbx_rd_conf_rpi_base_SHIFT 0
+#define lpfc_mbx_rd_conf_rpi_base_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_rpi_base_WORD word13
+#define lpfc_mbx_rd_conf_rpi_count_SHIFT 16
+#define lpfc_mbx_rd_conf_rpi_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_rpi_count_WORD word13
+ uint32_t word14;
+#define lpfc_mbx_rd_conf_vpi_base_SHIFT 0
+#define lpfc_mbx_rd_conf_vpi_base_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_vpi_base_WORD word14
+#define lpfc_mbx_rd_conf_vpi_count_SHIFT 16
+#define lpfc_mbx_rd_conf_vpi_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_vpi_count_WORD word14
+ uint32_t word15;
+#define lpfc_mbx_rd_conf_vfi_base_SHIFT 0
+#define lpfc_mbx_rd_conf_vfi_base_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_vfi_base_WORD word15
+#define lpfc_mbx_rd_conf_vfi_count_SHIFT 16
+#define lpfc_mbx_rd_conf_vfi_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_vfi_count_WORD word15
+ uint32_t word16;
+#define lpfc_mbx_rd_conf_fcfi_base_SHIFT 0
+#define lpfc_mbx_rd_conf_fcfi_base_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_fcfi_base_WORD word16
+#define lpfc_mbx_rd_conf_fcfi_count_SHIFT 16
+#define lpfc_mbx_rd_conf_fcfi_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_fcfi_count_WORD word16
+ uint32_t word17;
+#define lpfc_mbx_rd_conf_rq_count_SHIFT 0
+#define lpfc_mbx_rd_conf_rq_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_rq_count_WORD word17
+#define lpfc_mbx_rd_conf_eq_count_SHIFT 16
+#define lpfc_mbx_rd_conf_eq_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_eq_count_WORD word17
+ uint32_t word18;
+#define lpfc_mbx_rd_conf_wq_count_SHIFT 0
+#define lpfc_mbx_rd_conf_wq_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_wq_count_WORD word18
+#define lpfc_mbx_rd_conf_cq_count_SHIFT 16
+#define lpfc_mbx_rd_conf_cq_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_cq_count_WORD word18
+};
+
+struct lpfc_mbx_request_features {
+ uint32_t word1;
+#define lpfc_mbx_rq_ftr_qry_SHIFT 0
+#define lpfc_mbx_rq_ftr_qry_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_qry_WORD word1
+ uint32_t word2;
+#define lpfc_mbx_rq_ftr_rq_iaab_SHIFT 0
+#define lpfc_mbx_rq_ftr_rq_iaab_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_iaab_WORD word2
+#define lpfc_mbx_rq_ftr_rq_npiv_SHIFT 1
+#define lpfc_mbx_rq_ftr_rq_npiv_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_npiv_WORD word2
+#define lpfc_mbx_rq_ftr_rq_dif_SHIFT 2
+#define lpfc_mbx_rq_ftr_rq_dif_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_dif_WORD word2
+#define lpfc_mbx_rq_ftr_rq_vf_SHIFT 3
+#define lpfc_mbx_rq_ftr_rq_vf_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_vf_WORD word2
+#define lpfc_mbx_rq_ftr_rq_fcpi_SHIFT 4
+#define lpfc_mbx_rq_ftr_rq_fcpi_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_fcpi_WORD word2
+#define lpfc_mbx_rq_ftr_rq_fcpt_SHIFT 5
+#define lpfc_mbx_rq_ftr_rq_fcpt_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_fcpt_WORD word2
+#define lpfc_mbx_rq_ftr_rq_fcpc_SHIFT 6
+#define lpfc_mbx_rq_ftr_rq_fcpc_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_fcpc_WORD word2
+#define lpfc_mbx_rq_ftr_rq_ifip_SHIFT 7
+#define lpfc_mbx_rq_ftr_rq_ifip_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_ifip_WORD word2
+ uint32_t word3;
+#define lpfc_mbx_rq_ftr_rsp_iaab_SHIFT 0
+#define lpfc_mbx_rq_ftr_rsp_iaab_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_iaab_WORD word3
+#define lpfc_mbx_rq_ftr_rsp_npiv_SHIFT 1
+#define lpfc_mbx_rq_ftr_rsp_npiv_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_npiv_WORD word3
+#define lpfc_mbx_rq_ftr_rsp_dif_SHIFT 2
+#define lpfc_mbx_rq_ftr_rsp_dif_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_dif_WORD word3
+#define lpfc_mbx_rq_ftr_rsp_vf_SHIFT 3
+#define lpfc_mbx_rq_ftr_rsp_vf__MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_vf_WORD word3
+#define lpfc_mbx_rq_ftr_rsp_fcpi_SHIFT 4
+#define lpfc_mbx_rq_ftr_rsp_fcpi_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_fcpi_WORD word3
+#define lpfc_mbx_rq_ftr_rsp_fcpt_SHIFT 5
+#define lpfc_mbx_rq_ftr_rsp_fcpt_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_fcpt_WORD word3
+#define lpfc_mbx_rq_ftr_rsp_fcpc_SHIFT 6
+#define lpfc_mbx_rq_ftr_rsp_fcpc_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_fcpc_WORD word3
+#define lpfc_mbx_rq_ftr_rsp_ifip_SHIFT 7
+#define lpfc_mbx_rq_ftr_rsp_ifip_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_ifip_WORD word3
+};
+
+/* Mailbox Completion Queue Error Messages */
+#define MB_CQE_STATUS_SUCCESS 0x0
+#define MB_CQE_STATUS_INSUFFICIENT_PRIVILEGES 0x1
+#define MB_CQE_STATUS_INVALID_PARAMETER 0x2
+#define MB_CQE_STATUS_INSUFFICIENT_RESOURCES 0x3
+#define MB_CEQ_STATUS_QUEUE_FLUSHING 0x4
+#define MB_CQE_STATUS_DMA_FAILED 0x5
+
+/* mailbox queue entry structure */
+struct lpfc_mqe {
+ uint32_t word0;
+#define lpfc_mqe_status_SHIFT 16
+#define lpfc_mqe_status_MASK 0x0000FFFF
+#define lpfc_mqe_status_WORD word0
+#define lpfc_mqe_command_SHIFT 8
+#define lpfc_mqe_command_MASK 0x000000FF
+#define lpfc_mqe_command_WORD word0
+ union {
+ uint32_t mb_words[LPFC_SLI4_MB_WORD_COUNT - 1];
+ /* sli4 mailbox commands */
+ struct lpfc_mbx_sli4_config sli4_config;
+ struct lpfc_mbx_init_vfi init_vfi;
+ struct lpfc_mbx_reg_vfi reg_vfi;
+ struct lpfc_mbx_reg_vfi unreg_vfi;
+ struct lpfc_mbx_init_vpi init_vpi;
+ struct lpfc_mbx_resume_rpi resume_rpi;
+ struct lpfc_mbx_read_fcf_tbl read_fcf_tbl;
+ struct lpfc_mbx_add_fcf_tbl_entry add_fcf_entry;
+ struct lpfc_mbx_del_fcf_tbl_entry del_fcf_entry;
+ struct lpfc_mbx_reg_fcfi reg_fcfi;
+ struct lpfc_mbx_unreg_fcfi unreg_fcfi;
+ struct lpfc_mbx_mq_create mq_create;
+ struct lpfc_mbx_eq_create eq_create;
+ struct lpfc_mbx_cq_create cq_create;
+ struct lpfc_mbx_wq_create wq_create;
+ struct lpfc_mbx_rq_create rq_create;
+ struct lpfc_mbx_mq_destroy mq_destroy;
+ struct lpfc_mbx_eq_destroy eq_destroy;
+ struct lpfc_mbx_cq_destroy cq_destroy;
+ struct lpfc_mbx_wq_destroy wq_destroy;
+ struct lpfc_mbx_rq_destroy rq_destroy;
+ struct lpfc_mbx_post_sgl_pages post_sgl_pages;
+ struct lpfc_mbx_nembed_cmd nembed_cmd;
+ struct lpfc_mbx_read_rev read_rev;
+ struct lpfc_mbx_read_vpi read_vpi;
+ struct lpfc_mbx_read_config rd_config;
+ struct lpfc_mbx_request_features req_ftrs;
+ struct lpfc_mbx_post_hdr_tmpl hdr_tmpl;
+ struct lpfc_mbx_nop nop;
+ } un;
+};
+
+struct lpfc_mcqe {
+ uint32_t word0;
+#define lpfc_mcqe_status_SHIFT 0
+#define lpfc_mcqe_status_MASK 0x0000FFFF
+#define lpfc_mcqe_status_WORD word0
+#define lpfc_mcqe_ext_status_SHIFT 16
+#define lpfc_mcqe_ext_status_MASK 0x0000FFFF
+#define lpfc_mcqe_ext_status_WORD word0
+ uint32_t mcqe_tag0;
+ uint32_t mcqe_tag1;
+ uint32_t trailer;
+#define lpfc_trailer_valid_SHIFT 31
+#define lpfc_trailer_valid_MASK 0x00000001
+#define lpfc_trailer_valid_WORD trailer
+#define lpfc_trailer_async_SHIFT 30
+#define lpfc_trailer_async_MASK 0x00000001
+#define lpfc_trailer_async_WORD trailer
+#define lpfc_trailer_hpi_SHIFT 29
+#define lpfc_trailer_hpi_MASK 0x00000001
+#define lpfc_trailer_hpi_WORD trailer
+#define lpfc_trailer_completed_SHIFT 28
+#define lpfc_trailer_completed_MASK 0x00000001
+#define lpfc_trailer_completed_WORD trailer
+#define lpfc_trailer_consumed_SHIFT 27
+#define lpfc_trailer_consumed_MASK 0x00000001
+#define lpfc_trailer_consumed_WORD trailer
+#define lpfc_trailer_type_SHIFT 16
+#define lpfc_trailer_type_MASK 0x000000FF
+#define lpfc_trailer_type_WORD trailer
+#define lpfc_trailer_code_SHIFT 8
+#define lpfc_trailer_code_MASK 0x000000FF
+#define lpfc_trailer_code_WORD trailer
+#define LPFC_TRAILER_CODE_LINK 0x1
+#define LPFC_TRAILER_CODE_FCOE 0x2
+#define LPFC_TRAILER_CODE_DCBX 0x3
+};
+
+struct lpfc_acqe_link {
+ uint32_t word0;
+#define lpfc_acqe_link_speed_SHIFT 24
+#define lpfc_acqe_link_speed_MASK 0x000000FF
+#define lpfc_acqe_link_speed_WORD word0
+#define LPFC_ASYNC_LINK_SPEED_ZERO 0x0
+#define LPFC_ASYNC_LINK_SPEED_10MBPS 0x1
+#define LPFC_ASYNC_LINK_SPEED_100MBPS 0x2
+#define LPFC_ASYNC_LINK_SPEED_1GBPS 0x3
+#define LPFC_ASYNC_LINK_SPEED_10GBPS 0x4
+#define lpfc_acqe_link_duplex_SHIFT 16
+#define lpfc_acqe_link_duplex_MASK 0x000000FF
+#define lpfc_acqe_link_duplex_WORD word0
+#define LPFC_ASYNC_LINK_DUPLEX_NONE 0x0
+#define LPFC_ASYNC_LINK_DUPLEX_HALF 0x1
+#define LPFC_ASYNC_LINK_DUPLEX_FULL 0x2
+#define lpfc_acqe_link_status_SHIFT 8
+#define lpfc_acqe_link_status_MASK 0x000000FF
+#define lpfc_acqe_link_status_WORD word0
+#define LPFC_ASYNC_LINK_STATUS_DOWN 0x0
+#define LPFC_ASYNC_LINK_STATUS_UP 0x1
+#define LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN 0x2
+#define LPFC_ASYNC_LINK_STATUS_LOGICAL_UP 0x3
+#define lpfc_acqe_link_physical_SHIFT 0
+#define lpfc_acqe_link_physical_MASK 0x000000FF
+#define lpfc_acqe_link_physical_WORD word0
+#define LPFC_ASYNC_LINK_PORT_A 0x0
+#define LPFC_ASYNC_LINK_PORT_B 0x1
+ uint32_t word1;
+#define lpfc_acqe_link_fault_SHIFT 0
+#define lpfc_acqe_link_fault_MASK 0x000000FF
+#define lpfc_acqe_link_fault_WORD word1
+#define LPFC_ASYNC_LINK_FAULT_NONE 0x0
+#define LPFC_ASYNC_LINK_FAULT_LOCAL 0x1
+#define LPFC_ASYNC_LINK_FAULT_REMOTE 0x2
+ uint32_t event_tag;
+ uint32_t trailer;
+};
+
+struct lpfc_acqe_fcoe {
+ uint32_t fcf_index;
+ uint32_t word1;
+#define lpfc_acqe_fcoe_fcf_count_SHIFT 0
+#define lpfc_acqe_fcoe_fcf_count_MASK 0x0000FFFF
+#define lpfc_acqe_fcoe_fcf_count_WORD word1
+#define lpfc_acqe_fcoe_event_type_SHIFT 16
+#define lpfc_acqe_fcoe_event_type_MASK 0x0000FFFF
+#define lpfc_acqe_fcoe_event_type_WORD word1
+#define LPFC_FCOE_EVENT_TYPE_NEW_FCF 0x1
+#define LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL 0x2
+#define LPFC_FCOE_EVENT_TYPE_FCF_DEAD 0x3
+ uint32_t event_tag;
+ uint32_t trailer;
+};
+
+struct lpfc_acqe_dcbx {
+ uint32_t tlv_ttl;
+ uint32_t reserved;
+ uint32_t event_tag;
+ uint32_t trailer;
+};
+
+/*
+ * Define the bootstrap mailbox (bmbx) region used to communicate
+ * mailbox command between the host and port. The mailbox consists
+ * of a payload area of 256 bytes and a completion queue of length
+ * 16 bytes.
+ */
+struct lpfc_bmbx_create {
+ struct lpfc_mqe mqe;
+ struct lpfc_mcqe mcqe;
+};
+
+#define SGL_ALIGN_SZ 64
+#define SGL_PAGE_SIZE 4096
+/* align SGL addr on a size boundary - adjust address up */
+#define NO_XRI ((uint16_t)-1)
+struct wqe_common {
+ uint32_t word6;
+#define wqe_xri_SHIFT 0
+#define wqe_xri_MASK 0x0000FFFF
+#define wqe_xri_WORD word6
+#define wqe_ctxt_tag_SHIFT 16
+#define wqe_ctxt_tag_MASK 0x0000FFFF
+#define wqe_ctxt_tag_WORD word6
+ uint32_t word7;
+#define wqe_ct_SHIFT 2
+#define wqe_ct_MASK 0x00000003
+#define wqe_ct_WORD word7
+#define wqe_status_SHIFT 4
+#define wqe_status_MASK 0x0000000f
+#define wqe_status_WORD word7
+#define wqe_cmnd_SHIFT 8
+#define wqe_cmnd_MASK 0x000000ff
+#define wqe_cmnd_WORD word7
+#define wqe_class_SHIFT 16
+#define wqe_class_MASK 0x00000007
+#define wqe_class_WORD word7
+#define wqe_pu_SHIFT 20
+#define wqe_pu_MASK 0x00000003
+#define wqe_pu_WORD word7
+#define wqe_erp_SHIFT 22
+#define wqe_erp_MASK 0x00000001
+#define wqe_erp_WORD word7
+#define wqe_lnk_SHIFT 23
+#define wqe_lnk_MASK 0x00000001
+#define wqe_lnk_WORD word7
+#define wqe_tmo_SHIFT 24
+#define wqe_tmo_MASK 0x000000ff
+#define wqe_tmo_WORD word7
+ uint32_t abort_tag; /* word 8 in WQE */
+ uint32_t word9;
+#define wqe_reqtag_SHIFT 0
+#define wqe_reqtag_MASK 0x0000FFFF
+#define wqe_reqtag_WORD word9
+#define wqe_rcvoxid_SHIFT 16
+#define wqe_rcvoxid_MASK 0x0000FFFF
+#define wqe_rcvoxid_WORD word9
+ uint32_t word10;
+#define wqe_pri_SHIFT 16
+#define wqe_pri_MASK 0x00000007
+#define wqe_pri_WORD word10
+#define wqe_pv_SHIFT 19
+#define wqe_pv_MASK 0x00000001
+#define wqe_pv_WORD word10
+#define wqe_xc_SHIFT 21
+#define wqe_xc_MASK 0x00000001
+#define wqe_xc_WORD word10
+#define wqe_ccpe_SHIFT 23
+#define wqe_ccpe_MASK 0x00000001
+#define wqe_ccpe_WORD word10
+#define wqe_ccp_SHIFT 24
+#define wqe_ccp_MASK 0x000000ff
+#define wqe_ccp_WORD word10
+ uint32_t word11;
+#define wqe_cmd_type_SHIFT 0
+#define wqe_cmd_type_MASK 0x0000000f
+#define wqe_cmd_type_WORD word11
+#define wqe_wqec_SHIFT 7
+#define wqe_wqec_MASK 0x00000001
+#define wqe_wqec_WORD word11
+#define wqe_cqid_SHIFT 16
+#define wqe_cqid_MASK 0x000003ff
+#define wqe_cqid_WORD word11
+};
+
+struct wqe_did {
+ uint32_t word5;
+#define wqe_els_did_SHIFT 0
+#define wqe_els_did_MASK 0x00FFFFFF
+#define wqe_els_did_WORD word5
+#define wqe_xmit_bls_ar_SHIFT 30
+#define wqe_xmit_bls_ar_MASK 0x00000001
+#define wqe_xmit_bls_ar_WORD word5
+#define wqe_xmit_bls_xo_SHIFT 31
+#define wqe_xmit_bls_xo_MASK 0x00000001
+#define wqe_xmit_bls_xo_WORD word5
+};
+
+struct els_request64_wqe {
+ struct ulp_bde64 bde;
+ uint32_t payload_len;
+ uint32_t word4;
+#define els_req64_sid_SHIFT 0
+#define els_req64_sid_MASK 0x00FFFFFF
+#define els_req64_sid_WORD word4
+#define els_req64_sp_SHIFT 24
+#define els_req64_sp_MASK 0x00000001
+#define els_req64_sp_WORD word4
+#define els_req64_vf_SHIFT 25
+#define els_req64_vf_MASK 0x00000001
+#define els_req64_vf_WORD word4
+ struct wqe_did wqe_dest;
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t word12;
+#define els_req64_vfid_SHIFT 1
+#define els_req64_vfid_MASK 0x00000FFF
+#define els_req64_vfid_WORD word12
+#define els_req64_pri_SHIFT 13
+#define els_req64_pri_MASK 0x00000007
+#define els_req64_pri_WORD word12
+ uint32_t word13;
+#define els_req64_hopcnt_SHIFT 24
+#define els_req64_hopcnt_MASK 0x000000ff
+#define els_req64_hopcnt_WORD word13
+ uint32_t reserved[2];
+};
+
+struct xmit_els_rsp64_wqe {
+ struct ulp_bde64 bde;
+ uint32_t rsvd3;
+ uint32_t rsvd4;
+ struct wqe_did wqe_dest;
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4];
+};
+
+struct xmit_bls_rsp64_wqe {
+ uint32_t payload0;
+ uint32_t word1;
+#define xmit_bls_rsp64_rxid_SHIFT 0
+#define xmit_bls_rsp64_rxid_MASK 0x0000ffff
+#define xmit_bls_rsp64_rxid_WORD word1
+#define xmit_bls_rsp64_oxid_SHIFT 16
+#define xmit_bls_rsp64_oxid_MASK 0x0000ffff
+#define xmit_bls_rsp64_oxid_WORD word1
+ uint32_t word2;
+#define xmit_bls_rsp64_seqcntlo_SHIFT 0
+#define xmit_bls_rsp64_seqcntlo_MASK 0x0000ffff
+#define xmit_bls_rsp64_seqcntlo_WORD word2
+#define xmit_bls_rsp64_seqcnthi_SHIFT 16
+#define xmit_bls_rsp64_seqcnthi_MASK 0x0000ffff
+#define xmit_bls_rsp64_seqcnthi_WORD word2
+ uint32_t rsrvd3;
+ uint32_t rsrvd4;
+ struct wqe_did wqe_dest;
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4];
+};
+struct wqe_rctl_dfctl {
+ uint32_t word5;
+#define wqe_si_SHIFT 2
+#define wqe_si_MASK 0x000000001
+#define wqe_si_WORD word5
+#define wqe_la_SHIFT 3
+#define wqe_la_MASK 0x000000001
+#define wqe_la_WORD word5
+#define wqe_ls_SHIFT 7
+#define wqe_ls_MASK 0x000000001
+#define wqe_ls_WORD word5
+#define wqe_dfctl_SHIFT 8
+#define wqe_dfctl_MASK 0x0000000ff
+#define wqe_dfctl_WORD word5
+#define wqe_type_SHIFT 16
+#define wqe_type_MASK 0x0000000ff
+#define wqe_type_WORD word5
+#define wqe_rctl_SHIFT 24
+#define wqe_rctl_MASK 0x0000000ff
+#define wqe_rctl_WORD word5
+};
+
+struct xmit_seq64_wqe {
+ struct ulp_bde64 bde;
+ uint32_t paylaod_offset;
+ uint32_t relative_offset;
+ struct wqe_rctl_dfctl wge_ctl;
+ struct wqe_common wqe_com; /* words 6-11 */
+ /* Note: word10 different REVISIT */
+ uint32_t xmit_len;
+ uint32_t rsvd_12_15[3];
+};
+struct xmit_bcast64_wqe {
+ struct ulp_bde64 bde;
+ uint32_t paylaod_len;
+ uint32_t rsvd4;
+ struct wqe_rctl_dfctl wge_ctl; /* word 5 */
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4];
+};
+
+struct gen_req64_wqe {
+ struct ulp_bde64 bde;
+ uint32_t command_len;
+ uint32_t payload_len;
+ struct wqe_rctl_dfctl wge_ctl; /* word 5 */
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4];
+};
+
+struct create_xri_wqe {
+ uint32_t rsrvd[5]; /* words 0-4 */
+ struct wqe_did wqe_dest; /* word 5 */
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4]; /* word 12-15 */
+};
+
+#define T_REQUEST_TAG 3
+#define T_XRI_TAG 1
+
+struct abort_cmd_wqe {
+ uint32_t rsrvd[3];
+ uint32_t word3;
+#define abort_cmd_ia_SHIFT 0
+#define abort_cmd_ia_MASK 0x000000001
+#define abort_cmd_ia_WORD word3
+#define abort_cmd_criteria_SHIFT 8
+#define abort_cmd_criteria_MASK 0x0000000ff
+#define abort_cmd_criteria_WORD word3
+ uint32_t rsrvd4;
+ uint32_t rsrvd5;
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4]; /* word 12-15 */
+};
+
+struct fcp_iwrite64_wqe {
+ struct ulp_bde64 bde;
+ uint32_t payload_len;
+ uint32_t total_xfer_len;
+ uint32_t initial_xfer_len;
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4]; /* word 12-15 */
+};
+
+struct fcp_iread64_wqe {
+ struct ulp_bde64 bde;
+ uint32_t payload_len; /* word 3 */
+ uint32_t total_xfer_len; /* word 4 */
+ uint32_t rsrvd5; /* word 5 */
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4]; /* word 12-15 */
+};
+
+struct fcp_icmnd64_wqe {
+ struct ulp_bde64 bde; /* words 0-2 */
+ uint32_t rsrvd[3]; /* words 3-5 */
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4]; /* word 12-15 */
+};
+
+
+union lpfc_wqe {
+ uint32_t words[16];
+ struct lpfc_wqe_generic generic;
+ struct fcp_icmnd64_wqe fcp_icmd;
+ struct fcp_iread64_wqe fcp_iread;
+ struct fcp_iwrite64_wqe fcp_iwrite;
+ struct abort_cmd_wqe abort_cmd;
+ struct create_xri_wqe create_xri;
+ struct xmit_bcast64_wqe xmit_bcast64;
+ struct xmit_seq64_wqe xmit_sequence;
+ struct xmit_bls_rsp64_wqe xmit_bls_rsp;
+ struct xmit_els_rsp64_wqe xmit_els_rsp;
+ struct els_request64_wqe els_req;
+ struct gen_req64_wqe gen_req;
+};
+
+#define FCP_COMMAND 0x0
+#define FCP_COMMAND_DATA_OUT 0x1
+#define ELS_COMMAND_NON_FIP 0xC
+#define ELS_COMMAND_FIP 0xD
+#define OTHER_COMMAND 0x8
+
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 86d1bdc..2f5907f 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -34,8 +34,10 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -51,9 +53,23 @@ char *_dump_buf_dif;
unsigned long _dump_buf_dif_order;
spinlock_t _dump_buf_lock;
-static int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int);
static void lpfc_get_hba_model_desc(struct lpfc_hba *, uint8_t *, uint8_t *);
static int lpfc_post_rcv_buf(struct lpfc_hba *);
+static int lpfc_sli4_queue_create(struct lpfc_hba *);
+static void lpfc_sli4_queue_destroy(struct lpfc_hba *);
+static int lpfc_create_bootstrap_mbox(struct lpfc_hba *);
+static int lpfc_setup_endian_order(struct lpfc_hba *);
+static int lpfc_sli4_read_config(struct lpfc_hba *);
+static void lpfc_destroy_bootstrap_mbox(struct lpfc_hba *);
+static void lpfc_free_sgl_list(struct lpfc_hba *);
+static int lpfc_init_sgl_list(struct lpfc_hba *);
+static int lpfc_init_active_sgl_array(struct lpfc_hba *);
+static void lpfc_free_active_sgl(struct lpfc_hba *);
+static int lpfc_hba_down_post_s3(struct lpfc_hba *phba);
+static int lpfc_hba_down_post_s4(struct lpfc_hba *phba);
+static int lpfc_sli4_cq_event_pool_create(struct lpfc_hba *);
+static void lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *);
+static void lpfc_sli4_cq_event_release_all(struct lpfc_hba *);
static struct scsi_transport_template *lpfc_transport_template = NULL;
static struct scsi_transport_template *lpfc_vport_transport_template = NULL;
@@ -92,7 +108,7 @@ lpfc_config_port_prep(struct lpfc_hba *phba)
return -ENOMEM;
}
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
phba->link_state = LPFC_INIT_MBX_CMDS;
if (lpfc_is_LC_HBA(phba->pcidev->device)) {
@@ -205,6 +221,11 @@ lpfc_config_port_prep(struct lpfc_hba *phba)
mb->mbxCommand, mb->mbxStatus);
mb->un.varDmp.word_cnt = 0;
}
+ /* dump mem may return a zero when finished or we got a
+ * mailbox error, either way we are done.
+ */
+ if (mb->un.varDmp.word_cnt == 0)
+ break;
if (mb->un.varDmp.word_cnt > DMP_VPD_SIZE - offset)
mb->un.varDmp.word_cnt = DMP_VPD_SIZE - offset;
lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET,
@@ -233,7 +254,7 @@ out_free_mbox:
static void
lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
{
- if (pmboxq->mb.mbxStatus == MBX_SUCCESS)
+ if (pmboxq->u.mb.mbxStatus == MBX_SUCCESS)
phba->temp_sensor_support = 1;
else
phba->temp_sensor_support = 0;
@@ -260,7 +281,7 @@ lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
/* character array used for decoding dist type. */
char dist_char[] = "nabx";
- if (pmboxq->mb.mbxStatus != MBX_SUCCESS) {
+ if (pmboxq->u.mb.mbxStatus != MBX_SUCCESS) {
mempool_free(pmboxq, phba->mbox_mem_pool);
return;
}
@@ -268,7 +289,7 @@ lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
prg = (struct prog_id *) &prog_id_word;
/* word 7 contain option rom version */
- prog_id_word = pmboxq->mb.un.varWords[7];
+ prog_id_word = pmboxq->u.mb.un.varWords[7];
/* Decode the Option rom version word to a readable string */
if (prg->dist < 4)
@@ -325,7 +346,7 @@ lpfc_config_port_post(struct lpfc_hba *phba)
phba->link_state = LPFC_HBA_ERROR;
return -ENOMEM;
}
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
/* Get login parameters for NID. */
lpfc_read_sparam(phba, pmb, 0);
@@ -364,6 +385,7 @@ lpfc_config_port_post(struct lpfc_hba *phba)
/* Update the fc_host data structures with new wwn. */
fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
+ fc_host_max_npiv_vports(shost) = phba->max_vpi;
/* If no serial number in VPD data, use low 6 bytes of WWNN */
/* This should be consolidated into parse_vpd ? - mr */
@@ -460,17 +482,18 @@ lpfc_config_port_post(struct lpfc_hba *phba)
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
"0352 Config MSI mailbox command "
"failed, mbxCmd x%x, mbxStatus x%x\n",
- pmb->mb.mbxCommand, pmb->mb.mbxStatus);
+ pmb->u.mb.mbxCommand,
+ pmb->u.mb.mbxStatus);
mempool_free(pmb, phba->mbox_mem_pool);
return -EIO;
}
}
+ spin_lock_irq(&phba->hbalock);
/* Initialize ERATT handling flag */
phba->hba_flag &= ~HBA_ERATT_HANDLED;
/* Enable appropriate host interrupts */
- spin_lock_irq(&phba->hbalock);
status = readl(phba->HCregaddr);
status |= HC_MBINT_ENA | HC_ERINT_ENA | HC_LAINT_ENA;
if (psli->num_rings > 0)
@@ -571,16 +594,20 @@ lpfc_hba_down_prep(struct lpfc_hba *phba)
{
struct lpfc_vport **vports;
int i;
- /* Disable interrupts */
- writel(0, phba->HCregaddr);
- readl(phba->HCregaddr); /* flush */
+
+ if (phba->sli_rev <= LPFC_SLI_REV3) {
+ /* Disable interrupts */
+ writel(0, phba->HCregaddr);
+ readl(phba->HCregaddr); /* flush */
+ }
if (phba->pport->load_flag & FC_UNLOADING)
lpfc_cleanup_discovery_resources(phba->pport);
else {
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++)
+ for (i = 0; i <= phba->max_vports &&
+ vports[i] != NULL; i++)
lpfc_cleanup_discovery_resources(vports[i]);
lpfc_destroy_vport_work_array(phba, vports);
}
@@ -588,7 +615,7 @@ lpfc_hba_down_prep(struct lpfc_hba *phba)
}
/**
- * lpfc_hba_down_post - Perform lpfc uninitialization after HBA reset
+ * lpfc_hba_down_post_s3 - Perform lpfc uninitialization after HBA reset
* @phba: pointer to lpfc HBA data structure.
*
* This routine will do uninitialization after the HBA is reset when bring
@@ -598,8 +625,8 @@ lpfc_hba_down_prep(struct lpfc_hba *phba)
* 0 - sucess.
* Any other value - error.
**/
-int
-lpfc_hba_down_post(struct lpfc_hba *phba)
+static int
+lpfc_hba_down_post_s3(struct lpfc_hba *phba)
{
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
@@ -642,6 +669,77 @@ lpfc_hba_down_post(struct lpfc_hba *phba)
return 0;
}
+/**
+ * lpfc_hba_down_post_s4 - Perform lpfc uninitialization after HBA reset
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine will do uninitialization after the HBA is reset when bring
+ * down the SLI Layer.
+ *
+ * Return codes
+ * 0 - sucess.
+ * Any other value - error.
+ **/
+static int
+lpfc_hba_down_post_s4(struct lpfc_hba *phba)
+{
+ struct lpfc_scsi_buf *psb, *psb_next;
+ LIST_HEAD(aborts);
+ int ret;
+ unsigned long iflag = 0;
+ ret = lpfc_hba_down_post_s3(phba);
+ if (ret)
+ return ret;
+ /* At this point in time the HBA is either reset or DOA. Either
+ * way, nothing should be on lpfc_abts_els_sgl_list, it needs to be
+ * on the lpfc_sgl_list so that it can either be freed if the
+ * driver is unloading or reposted if the driver is restarting
+ * the port.
+ */
+ spin_lock_irq(&phba->hbalock); /* required for lpfc_sgl_list and */
+ /* scsl_buf_list */
+ /* abts_sgl_list_lock required because worker thread uses this
+ * list.
+ */
+ spin_lock(&phba->sli4_hba.abts_sgl_list_lock);
+ list_splice_init(&phba->sli4_hba.lpfc_abts_els_sgl_list,
+ &phba->sli4_hba.lpfc_sgl_list);
+ spin_unlock(&phba->sli4_hba.abts_sgl_list_lock);
+ /* abts_scsi_buf_list_lock required because worker thread uses this
+ * list.
+ */
+ spin_lock(&phba->sli4_hba.abts_scsi_buf_list_lock);
+ list_splice_init(&phba->sli4_hba.lpfc_abts_scsi_buf_list,
+ &aborts);
+ spin_unlock(&phba->sli4_hba.abts_scsi_buf_list_lock);
+ spin_unlock_irq(&phba->hbalock);
+
+ list_for_each_entry_safe(psb, psb_next, &aborts, list) {
+ psb->pCmd = NULL;
+ psb->status = IOSTAT_SUCCESS;
+ }
+ spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
+ list_splice(&aborts, &phba->lpfc_scsi_buf_list);
+ spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
+ return 0;
+}
+
+/**
+ * lpfc_hba_down_post - Wrapper func for hba down post routine
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine wraps the actual SLI3 or SLI4 routine for performing
+ * uninitialization after the HBA is reset when bring down the SLI Layer.
+ *
+ * Return codes
+ * 0 - sucess.
+ * Any other value - error.
+ **/
+int
+lpfc_hba_down_post(struct lpfc_hba *phba)
+{
+ return (*phba->lpfc_hba_down_post)(phba);
+}
/**
* lpfc_hb_timeout - The HBA-timer timeout handler
@@ -809,7 +907,7 @@ lpfc_hb_timeout_handler(struct lpfc_hba *phba)
"taking this port offline.\n");
spin_lock_irq(&phba->hbalock);
- psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+ psli->sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
lpfc_offline_prep(phba);
@@ -834,13 +932,15 @@ lpfc_offline_eratt(struct lpfc_hba *phba)
struct lpfc_sli *psli = &phba->sli;
spin_lock_irq(&phba->hbalock);
- psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+ psli->sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
lpfc_offline_prep(phba);
lpfc_offline(phba);
lpfc_reset_barrier(phba);
+ spin_lock_irq(&phba->hbalock);
lpfc_sli_brdreset(phba);
+ spin_unlock_irq(&phba->hbalock);
lpfc_hba_down_post(phba);
lpfc_sli_brdready(phba, HS_MBRDY);
lpfc_unblock_mgmt_io(phba);
@@ -849,6 +949,25 @@ lpfc_offline_eratt(struct lpfc_hba *phba)
}
/**
+ * lpfc_sli4_offline_eratt - Bring lpfc offline on SLI4 hardware error attention
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to bring a SLI4 HBA offline when HBA hardware error
+ * other than Port Error 6 has been detected.
+ **/
+static void
+lpfc_sli4_offline_eratt(struct lpfc_hba *phba)
+{
+ lpfc_offline_prep(phba);
+ lpfc_offline(phba);
+ lpfc_sli4_brdreset(phba);
+ lpfc_hba_down_post(phba);
+ lpfc_sli4_post_status_check(phba);
+ lpfc_unblock_mgmt_io(phba);
+ phba->link_state = LPFC_HBA_ERROR;
+}
+
+/**
* lpfc_handle_deferred_eratt - The HBA hardware deferred error handler
* @phba: pointer to lpfc hba data structure.
*
@@ -864,6 +983,16 @@ lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
struct lpfc_sli_ring *pring;
struct lpfc_sli *psli = &phba->sli;
+ /* If the pci channel is offline, ignore possible errors,
+ * since we cannot communicate with the pci card anyway.
+ */
+ if (pci_channel_offline(phba->pcidev)) {
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~DEFER_ERATT;
+ spin_unlock_irq(&phba->hbalock);
+ return;
+ }
+
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0479 Deferred Adapter Hardware Error "
"Data: x%x x%x x%x\n",
@@ -871,7 +1000,7 @@ lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
phba->work_status[0], phba->work_status[1]);
spin_lock_irq(&phba->hbalock);
- psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+ psli->sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
@@ -909,13 +1038,30 @@ lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
if ((!phba->work_hs) && (!(phba->pport->load_flag & FC_UNLOADING)))
phba->work_hs = old_host_status & ~HS_FFER1;
+ spin_lock_irq(&phba->hbalock);
phba->hba_flag &= ~DEFER_ERATT;
+ spin_unlock_irq(&phba->hbalock);
phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
}
+static void
+lpfc_board_errevt_to_mgmt(struct lpfc_hba *phba)
+{
+ struct lpfc_board_event_header board_event;
+ struct Scsi_Host *shost;
+
+ board_event.event_type = FC_REG_BOARD_EVENT;
+ board_event.subcategory = LPFC_EVENT_PORTINTERR;
+ shost = lpfc_shost_from_vport(phba->pport);
+ fc_host_post_vendor_event(shost, fc_get_event_number(),
+ sizeof(board_event),
+ (char *) &board_event,
+ LPFC_NL_VENDOR_ID);
+}
+
/**
- * lpfc_handle_eratt - The HBA hardware error handler
+ * lpfc_handle_eratt_s3 - The SLI3 HBA hardware error handler
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to handle the following HBA hardware error
@@ -924,8 +1070,8 @@ lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
* 2 - DMA ring index out of range
* 3 - Mailbox command came back as unknown
**/
-void
-lpfc_handle_eratt(struct lpfc_hba *phba)
+static void
+lpfc_handle_eratt_s3(struct lpfc_hba *phba)
{
struct lpfc_vport *vport = phba->pport;
struct lpfc_sli *psli = &phba->sli;
@@ -934,24 +1080,23 @@ lpfc_handle_eratt(struct lpfc_hba *phba)
unsigned long temperature;
struct temp_event temp_event_data;
struct Scsi_Host *shost;
- struct lpfc_board_event_header board_event;
/* If the pci channel is offline, ignore possible errors,
- * since we cannot communicate with the pci card anyway. */
- if (pci_channel_offline(phba->pcidev))
+ * since we cannot communicate with the pci card anyway.
+ */
+ if (pci_channel_offline(phba->pcidev)) {
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~DEFER_ERATT;
+ spin_unlock_irq(&phba->hbalock);
return;
+ }
+
/* If resets are disabled then leave the HBA alone and return */
if (!phba->cfg_enable_hba_reset)
return;
/* Send an internal error event to mgmt application */
- board_event.event_type = FC_REG_BOARD_EVENT;
- board_event.subcategory = LPFC_EVENT_PORTINTERR;
- shost = lpfc_shost_from_vport(phba->pport);
- fc_host_post_vendor_event(shost, fc_get_event_number(),
- sizeof(board_event),
- (char *) &board_event,
- LPFC_NL_VENDOR_ID);
+ lpfc_board_errevt_to_mgmt(phba);
if (phba->hba_flag & DEFER_ERATT)
lpfc_handle_deferred_eratt(phba);
@@ -965,7 +1110,7 @@ lpfc_handle_eratt(struct lpfc_hba *phba)
phba->work_status[0], phba->work_status[1]);
spin_lock_irq(&phba->hbalock);
- psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+ psli->sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
/*
@@ -1037,6 +1182,65 @@ lpfc_handle_eratt(struct lpfc_hba *phba)
}
/**
+ * lpfc_handle_eratt_s4 - The SLI4 HBA hardware error handler
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to handle the SLI4 HBA hardware error attention
+ * conditions.
+ **/
+static void
+lpfc_handle_eratt_s4(struct lpfc_hba *phba)
+{
+ struct lpfc_vport *vport = phba->pport;
+ uint32_t event_data;
+ struct Scsi_Host *shost;
+
+ /* If the pci channel is offline, ignore possible errors, since
+ * we cannot communicate with the pci card anyway.
+ */
+ if (pci_channel_offline(phba->pcidev))
+ return;
+ /* If resets are disabled then leave the HBA alone and return */
+ if (!phba->cfg_enable_hba_reset)
+ return;
+
+ /* Send an internal error event to mgmt application */
+ lpfc_board_errevt_to_mgmt(phba);
+
+ /* For now, the actual action for SLI4 device handling is not
+ * specified yet, just treated it as adaptor hardware failure
+ */
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0143 SLI4 Adapter Hardware Error Data: x%x x%x\n",
+ phba->work_status[0], phba->work_status[1]);
+
+ event_data = FC_REG_DUMP_EVENT;
+ shost = lpfc_shost_from_vport(vport);
+ fc_host_post_vendor_event(shost, fc_get_event_number(),
+ sizeof(event_data), (char *) &event_data,
+ SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX);
+
+ lpfc_sli4_offline_eratt(phba);
+}
+
+/**
+ * lpfc_handle_eratt - Wrapper func for handling hba error attention
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba error attention handling
+ * routine from the API jump table function pointer from the lpfc_hba struct.
+ *
+ * Return codes
+ * 0 - sucess.
+ * Any other value - error.
+ **/
+void
+lpfc_handle_eratt(struct lpfc_hba *phba)
+{
+ (*phba->lpfc_handle_eratt)(phba);
+}
+
+/**
* lpfc_handle_latt - The HBA link event handler
* @phba: pointer to lpfc hba data structure.
*
@@ -1137,7 +1341,7 @@ lpfc_handle_latt_err_exit:
* 0 - pointer to the VPD passed in is NULL
* 1 - success
**/
-static int
+int
lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len)
{
uint8_t lenlo, lenhi;
@@ -1292,6 +1496,7 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
uint16_t dev_id = phba->pcidev->device;
int max_speed;
int GE = 0;
+ int oneConnect = 0; /* default is not a oneConnect */
struct {
char * name;
int max_speed;
@@ -1437,6 +1642,14 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
case PCI_DEVICE_ID_PROTEUS_S:
m = (typeof(m)) {"LPemv12002-S", max_speed, "PCIe IOV"};
break;
+ case PCI_DEVICE_ID_TIGERSHARK:
+ oneConnect = 1;
+ m = (typeof(m)) {"OCe10100-F", max_speed, "PCIe"};
+ break;
+ case PCI_DEVICE_ID_TIGERSHARK_S:
+ oneConnect = 1;
+ m = (typeof(m)) {"OCe10100-F-S", max_speed, "PCIe"};
+ break;
default:
m = (typeof(m)){ NULL };
break;
@@ -1444,13 +1657,24 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
if (mdp && mdp[0] == '\0')
snprintf(mdp, 79,"%s", m.name);
- if (descp && descp[0] == '\0')
- snprintf(descp, 255,
- "Emulex %s %d%s %s %s",
- m.name, m.max_speed,
- (GE) ? "GE" : "Gb",
- m.bus,
- (GE) ? "FCoE Adapter" : "Fibre Channel Adapter");
+ /* oneConnect hba requires special processing, they are all initiators
+ * and we put the port number on the end
+ */
+ if (descp && descp[0] == '\0') {
+ if (oneConnect)
+ snprintf(descp, 255,
+ "Emulex OneConnect %s, FCoE Initiator, Port %s",
+ m.name,
+ phba->Port);
+ else
+ snprintf(descp, 255,
+ "Emulex %s %d%s %s %s",
+ m.name, m.max_speed,
+ (GE) ? "GE" : "Gb",
+ m.bus,
+ (GE) ? "FCoE Adapter" :
+ "Fibre Channel Adapter");
+ }
}
/**
@@ -1533,7 +1757,8 @@ lpfc_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt)
icmd->ulpCommand = CMD_QUE_RING_BUF64_CN;
icmd->ulpLe = 1;
- if (lpfc_sli_issue_iocb(phba, pring, iocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, pring->ringno, iocb, 0) ==
+ IOCB_ERROR) {
lpfc_mbuf_free(phba, mp1->virt, mp1->phys);
kfree(mp1);
cnt++;
@@ -1761,7 +1986,6 @@ lpfc_cleanup(struct lpfc_vport *vport)
* Lets wait for this to happen, if needed.
*/
while (!list_empty(&vport->fc_nodes)) {
-
if (i++ > 3000) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
"0233 Nodelist not empty\n");
@@ -1782,7 +2006,6 @@ lpfc_cleanup(struct lpfc_vport *vport)
/* Wait for any activity on ndlps to settle */
msleep(10);
}
- return;
}
/**
@@ -1803,22 +2026,36 @@ lpfc_stop_vport_timers(struct lpfc_vport *vport)
}
/**
- * lpfc_stop_phba_timers - Stop all the timers associated with an HBA
+ * lpfc_stop_hba_timers - Stop all the timers associated with an HBA
* @phba: pointer to lpfc hba data structure.
*
* This routine stops all the timers associated with a HBA. This function is
* invoked before either putting a HBA offline or unloading the driver.
**/
-static void
-lpfc_stop_phba_timers(struct lpfc_hba *phba)
+void
+lpfc_stop_hba_timers(struct lpfc_hba *phba)
{
- del_timer_sync(&phba->fcp_poll_timer);
lpfc_stop_vport_timers(phba->pport);
del_timer_sync(&phba->sli.mbox_tmo);
del_timer_sync(&phba->fabric_block_timer);
- phba->hb_outstanding = 0;
- del_timer_sync(&phba->hb_tmofunc);
del_timer_sync(&phba->eratt_poll);
+ del_timer_sync(&phba->hb_tmofunc);
+ phba->hb_outstanding = 0;
+
+ switch (phba->pci_dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ /* Stop any LightPulse device specific driver timers */
+ del_timer_sync(&phba->fcp_poll_timer);
+ break;
+ case LPFC_PCI_DEV_OC:
+ /* Stop any OneConnect device sepcific driver timers */
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0297 Invalid device group (x%x)\n",
+ phba->pci_dev_grp);
+ break;
+ }
return;
}
@@ -1878,14 +2115,21 @@ lpfc_online(struct lpfc_hba *phba)
return 1;
}
- if (lpfc_sli_hba_setup(phba)) { /* Initialize the HBA */
- lpfc_unblock_mgmt_io(phba);
- return 1;
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ if (lpfc_sli4_hba_setup(phba)) { /* Initialize SLI4 HBA */
+ lpfc_unblock_mgmt_io(phba);
+ return 1;
+ }
+ } else {
+ if (lpfc_sli_hba_setup(phba)) { /* Initialize SLI2/SLI3 HBA */
+ lpfc_unblock_mgmt_io(phba);
+ return 1;
+ }
}
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
struct Scsi_Host *shost;
shost = lpfc_shost_from_vport(vports[i]);
spin_lock_irq(shost->host_lock);
@@ -1947,11 +2191,12 @@ lpfc_offline_prep(struct lpfc_hba * phba)
/* Issue an unreg_login to all nodes on all vports */
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL) {
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
struct Scsi_Host *shost;
if (vports[i]->load_flag & FC_UNLOADING)
continue;
+ vports[i]->vfi_state &= ~LPFC_VFI_REGISTERED;
shost = lpfc_shost_from_vport(vports[i]);
list_for_each_entry_safe(ndlp, next_ndlp,
&vports[i]->fc_nodes,
@@ -1975,7 +2220,7 @@ lpfc_offline_prep(struct lpfc_hba * phba)
}
lpfc_destroy_vport_work_array(phba, vports);
- lpfc_sli_flush_mbox_queue(phba);
+ lpfc_sli_mbox_sys_shutdown(phba);
}
/**
@@ -1996,11 +2241,11 @@ lpfc_offline(struct lpfc_hba *phba)
if (phba->pport->fc_flag & FC_OFFLINE_MODE)
return;
- /* stop all timers associated with this hba */
- lpfc_stop_phba_timers(phba);
+ /* stop port and all timers associated with this hba */
+ lpfc_stop_port(phba);
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++)
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
lpfc_stop_vport_timers(vports[i]);
lpfc_destroy_vport_work_array(phba, vports);
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
@@ -2013,7 +2258,7 @@ lpfc_offline(struct lpfc_hba *phba)
spin_unlock_irq(&phba->hbalock);
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
shost = lpfc_shost_from_vport(vports[i]);
spin_lock_irq(shost->host_lock);
vports[i]->work_port_events = 0;
@@ -2106,6 +2351,10 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
shost->max_lun = vport->cfg_max_luns;
shost->this_id = -1;
shost->max_cmd_len = 16;
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ shost->dma_boundary = LPFC_SLI4_MAX_SEGMENT_SIZE;
+ shost->sg_tablesize = phba->cfg_sg_seg_cnt;
+ }
/*
* Set initial can_queue value since 0 is no longer supported and
@@ -2123,6 +2372,7 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
/* Initialize all internally managed lists. */
INIT_LIST_HEAD(&vport->fc_nodes);
+ INIT_LIST_HEAD(&vport->rcv_buffer_list);
spin_lock_init(&vport->work_port_lock);
init_timer(&vport->fc_disctmo);
@@ -2314,15 +2564,3461 @@ void lpfc_host_attrib_init(struct Scsi_Host *shost)
}
/**
- * lpfc_enable_msix - Enable MSI-X interrupt mode
+ * lpfc_stop_port_s3 - Stop SLI3 device port
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to stop an SLI3 device port, it stops the device
+ * from generating interrupts and stops the device driver's timers for the
+ * device.
+ **/
+static void
+lpfc_stop_port_s3(struct lpfc_hba *phba)
+{
+ /* Clear all interrupt enable conditions */
+ writel(0, phba->HCregaddr);
+ readl(phba->HCregaddr); /* flush */
+ /* Clear all pending interrupts */
+ writel(0xffffffff, phba->HAregaddr);
+ readl(phba->HAregaddr); /* flush */
+
+ /* Reset some HBA SLI setup states */
+ lpfc_stop_hba_timers(phba);
+ phba->pport->work_port_events = 0;
+}
+
+/**
+ * lpfc_stop_port_s4 - Stop SLI4 device port
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to stop an SLI4 device port, it stops the device
+ * from generating interrupts and stops the device driver's timers for the
+ * device.
+ **/
+static void
+lpfc_stop_port_s4(struct lpfc_hba *phba)
+{
+ /* Reset some HBA SLI4 setup states */
+ lpfc_stop_hba_timers(phba);
+ phba->pport->work_port_events = 0;
+ phba->sli4_hba.intr_enable = 0;
+ /* Hard clear it for now, shall have more graceful way to wait later */
+ phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+}
+
+/**
+ * lpfc_stop_port - Wrapper function for stopping hba port
+ * @phba: Pointer to HBA context object.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba stop port routine from
+ * the API jump table function pointer from the lpfc_hba struct.
+ **/
+void
+lpfc_stop_port(struct lpfc_hba *phba)
+{
+ phba->lpfc_stop_port(phba);
+}
+
+/**
+ * lpfc_sli4_remove_dflt_fcf - Remove the driver default fcf record from the port.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to remove the driver default fcf record from
+ * the port. This routine currently acts on FCF Index 0.
+ *
+ **/
+void
+lpfc_sli_remove_dflt_fcf(struct lpfc_hba *phba)
+{
+ int rc = 0;
+ LPFC_MBOXQ_t *mboxq;
+ struct lpfc_mbx_del_fcf_tbl_entry *del_fcf_record;
+ uint32_t mbox_tmo, req_len;
+ uint32_t shdr_status, shdr_add_status;
+
+ mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2020 Failed to allocate mbox for ADD_FCF cmd\n");
+ return;
+ }
+
+ req_len = sizeof(struct lpfc_mbx_del_fcf_tbl_entry) -
+ sizeof(struct lpfc_sli4_cfg_mhdr);
+ rc = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_DELETE_FCF,
+ req_len, LPFC_SLI4_MBX_EMBED);
+ /*
+ * In phase 1, there is a single FCF index, 0. In phase2, the driver
+ * supports multiple FCF indices.
+ */
+ del_fcf_record = &mboxq->u.mqe.un.del_fcf_entry;
+ bf_set(lpfc_mbx_del_fcf_tbl_count, del_fcf_record, 1);
+ bf_set(lpfc_mbx_del_fcf_tbl_index, del_fcf_record,
+ phba->fcf.fcf_indx);
+
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ else {
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+ }
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr_status = bf_get(lpfc_mbox_hdr_status,
+ &del_fcf_record->header.cfg_shdr.response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+ &del_fcf_record->header.cfg_shdr.response);
+ if (shdr_status || shdr_add_status || rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2516 DEL FCF of default FCF Index failed "
+ "mbx status x%x, status x%x add_status x%x\n",
+ rc, shdr_status, shdr_add_status);
+ }
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mboxq, phba->mbox_mem_pool);
+}
+
+/**
+ * lpfc_sli4_parse_latt_fault - Parse sli4 link-attention link fault code
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to parse the SLI4 link-attention link fault code and
+ * translate it into the base driver's read link attention mailbox command
+ * status.
+ *
+ * Return: Link-attention status in terms of base driver's coding.
+ **/
+static uint16_t
+lpfc_sli4_parse_latt_fault(struct lpfc_hba *phba,
+ struct lpfc_acqe_link *acqe_link)
+{
+ uint16_t latt_fault;
+
+ switch (bf_get(lpfc_acqe_link_fault, acqe_link)) {
+ case LPFC_ASYNC_LINK_FAULT_NONE:
+ case LPFC_ASYNC_LINK_FAULT_LOCAL:
+ case LPFC_ASYNC_LINK_FAULT_REMOTE:
+ latt_fault = 0;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0398 Invalid link fault code: x%x\n",
+ bf_get(lpfc_acqe_link_fault, acqe_link));
+ latt_fault = MBXERR_ERROR;
+ break;
+ }
+ return latt_fault;
+}
+
+/**
+ * lpfc_sli4_parse_latt_type - Parse sli4 link attention type
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to parse the SLI4 link attention type and translate it
+ * into the base driver's link attention type coding.
+ *
+ * Return: Link attention type in terms of base driver's coding.
+ **/
+static uint8_t
+lpfc_sli4_parse_latt_type(struct lpfc_hba *phba,
+ struct lpfc_acqe_link *acqe_link)
+{
+ uint8_t att_type;
+
+ switch (bf_get(lpfc_acqe_link_status, acqe_link)) {
+ case LPFC_ASYNC_LINK_STATUS_DOWN:
+ case LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN:
+ att_type = AT_LINK_DOWN;
+ break;
+ case LPFC_ASYNC_LINK_STATUS_UP:
+ /* Ignore physical link up events - wait for logical link up */
+ att_type = AT_RESERVED;
+ break;
+ case LPFC_ASYNC_LINK_STATUS_LOGICAL_UP:
+ att_type = AT_LINK_UP;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0399 Invalid link attention type: x%x\n",
+ bf_get(lpfc_acqe_link_status, acqe_link));
+ att_type = AT_RESERVED;
+ break;
+ }
+ return att_type;
+}
+
+/**
+ * lpfc_sli4_parse_latt_link_speed - Parse sli4 link-attention link speed
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to parse the SLI4 link-attention link speed and translate
+ * it into the base driver's link-attention link speed coding.
+ *
+ * Return: Link-attention link speed in terms of base driver's coding.
+ **/
+static uint8_t
+lpfc_sli4_parse_latt_link_speed(struct lpfc_hba *phba,
+ struct lpfc_acqe_link *acqe_link)
+{
+ uint8_t link_speed;
+
+ switch (bf_get(lpfc_acqe_link_speed, acqe_link)) {
+ case LPFC_ASYNC_LINK_SPEED_ZERO:
+ link_speed = LA_UNKNW_LINK;
+ break;
+ case LPFC_ASYNC_LINK_SPEED_10MBPS:
+ link_speed = LA_UNKNW_LINK;
+ break;
+ case LPFC_ASYNC_LINK_SPEED_100MBPS:
+ link_speed = LA_UNKNW_LINK;
+ break;
+ case LPFC_ASYNC_LINK_SPEED_1GBPS:
+ link_speed = LA_1GHZ_LINK;
+ break;
+ case LPFC_ASYNC_LINK_SPEED_10GBPS:
+ link_speed = LA_10GHZ_LINK;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0483 Invalid link-attention link speed: x%x\n",
+ bf_get(lpfc_acqe_link_speed, acqe_link));
+ link_speed = LA_UNKNW_LINK;
+ break;
+ }
+ return link_speed;
+}
+
+/**
+ * lpfc_sli4_async_link_evt - Process the asynchronous link event
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to handle the SLI4 asynchronous link event.
+ **/
+static void
+lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
+ struct lpfc_acqe_link *acqe_link)
+{
+ struct lpfc_dmabuf *mp;
+ LPFC_MBOXQ_t *pmb;
+ MAILBOX_t *mb;
+ READ_LA_VAR *la;
+ uint8_t att_type;
+
+ att_type = lpfc_sli4_parse_latt_type(phba, acqe_link);
+ if (att_type != AT_LINK_DOWN && att_type != AT_LINK_UP)
+ return;
+ pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!pmb) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0395 The mboxq allocation failed\n");
+ return;
+ }
+ mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (!mp) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0396 The lpfc_dmabuf allocation failed\n");
+ goto out_free_pmb;
+ }
+ mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
+ if (!mp->virt) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0397 The mbuf allocation failed\n");
+ goto out_free_dmabuf;
+ }
+
+ /* Cleanup any outstanding ELS commands */
+ lpfc_els_flush_all_cmd(phba);
+
+ /* Block ELS IOCBs until we have done process link event */
+ phba->sli.ring[LPFC_ELS_RING].flag |= LPFC_STOP_IOCB_EVENT;
+
+ /* Update link event statistics */
+ phba->sli.slistat.link_event++;
+
+ /* Create pseudo lpfc_handle_latt mailbox command from link ACQE */
+ lpfc_read_la(phba, pmb, mp);
+ pmb->vport = phba->pport;
+
+ /* Parse and translate status field */
+ mb = &pmb->u.mb;
+ mb->mbxStatus = lpfc_sli4_parse_latt_fault(phba, acqe_link);
+
+ /* Parse and translate link attention fields */
+ la = (READ_LA_VAR *) &pmb->u.mb.un.varReadLA;
+ la->eventTag = acqe_link->event_tag;
+ la->attType = att_type;
+ la->UlnkSpeed = lpfc_sli4_parse_latt_link_speed(phba, acqe_link);
+
+ /* Fake the the following irrelvant fields */
+ la->topology = TOPOLOGY_PT_PT;
+ la->granted_AL_PA = 0;
+ la->il = 0;
+ la->pb = 0;
+ la->fa = 0;
+ la->mm = 0;
+
+ /* Keep the link status for extra SLI4 state machine reference */
+ phba->sli4_hba.link_state.speed =
+ bf_get(lpfc_acqe_link_speed, acqe_link);
+ phba->sli4_hba.link_state.duplex =
+ bf_get(lpfc_acqe_link_duplex, acqe_link);
+ phba->sli4_hba.link_state.status =
+ bf_get(lpfc_acqe_link_status, acqe_link);
+ phba->sli4_hba.link_state.physical =
+ bf_get(lpfc_acqe_link_physical, acqe_link);
+ phba->sli4_hba.link_state.fault =
+ bf_get(lpfc_acqe_link_fault, acqe_link);
+
+ /* Invoke the lpfc_handle_latt mailbox command callback function */
+ lpfc_mbx_cmpl_read_la(phba, pmb);
+
+ return;
+
+out_free_dmabuf:
+ kfree(mp);
+out_free_pmb:
+ mempool_free(pmb, phba->mbox_mem_pool);
+}
+
+/**
+ * lpfc_sli4_async_fcoe_evt - Process the asynchronous fcoe event
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async fcoe completion queue entry.
+ *
+ * This routine is to handle the SLI4 asynchronous fcoe event.
+ **/
+static void
+lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
+ struct lpfc_acqe_fcoe *acqe_fcoe)
+{
+ uint8_t event_type = bf_get(lpfc_acqe_fcoe_event_type, acqe_fcoe);
+ int rc;
+
+ switch (event_type) {
+ case LPFC_FCOE_EVENT_TYPE_NEW_FCF:
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+ "2546 New FCF found index 0x%x tag 0x%x \n",
+ acqe_fcoe->fcf_index,
+ acqe_fcoe->event_tag);
+ /*
+ * If the current FCF is in discovered state,
+ * do nothing.
+ */
+ spin_lock_irq(&phba->hbalock);
+ if (phba->fcf.fcf_flag & FCF_DISCOVERED) {
+ spin_unlock_irq(&phba->hbalock);
+ break;
+ }
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Read the FCF table and re-discover SAN. */
+ rc = lpfc_sli4_read_fcf_record(phba,
+ LPFC_FCOE_FCF_GET_FIRST);
+ if (rc)
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+ "2547 Read FCF record failed 0x%x\n",
+ rc);
+ break;
+
+ case LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2548 FCF Table full count 0x%x tag 0x%x \n",
+ bf_get(lpfc_acqe_fcoe_fcf_count, acqe_fcoe),
+ acqe_fcoe->event_tag);
+ break;
+
+ case LPFC_FCOE_EVENT_TYPE_FCF_DEAD:
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+ "2549 FCF disconnected fron network index 0x%x"
+ " tag 0x%x \n", acqe_fcoe->fcf_index,
+ acqe_fcoe->event_tag);
+ /* If the event is not for currently used fcf do nothing */
+ if (phba->fcf.fcf_indx != acqe_fcoe->fcf_index)
+ break;
+ /*
+ * Currently, driver support only one FCF - so treat this as
+ * a link down.
+ */
+ lpfc_linkdown(phba);
+ /* Unregister FCF if no devices connected to it */
+ lpfc_unregister_unused_fcf(phba);
+ break;
+
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0288 Unknown FCoE event type 0x%x event tag "
+ "0x%x\n", event_type, acqe_fcoe->event_tag);
+ break;
+ }
+}
+
+/**
+ * lpfc_sli4_async_dcbx_evt - Process the asynchronous dcbx event
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async dcbx completion queue entry.
+ *
+ * This routine is to handle the SLI4 asynchronous dcbx event.
+ **/
+static void
+lpfc_sli4_async_dcbx_evt(struct lpfc_hba *phba,
+ struct lpfc_acqe_dcbx *acqe_dcbx)
+{
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0290 The SLI4 DCBX asynchronous event is not "
+ "handled yet\n");
+}
+
+/**
+ * lpfc_sli4_async_event_proc - Process all the pending asynchronous event
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked by the worker thread to process all the pending
+ * SLI4 asynchronous events.
+ **/
+void lpfc_sli4_async_event_proc(struct lpfc_hba *phba)
+{
+ struct lpfc_cq_event *cq_event;
+
+ /* First, declare the async event has been handled */
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~ASYNC_EVENT;
+ spin_unlock_irq(&phba->hbalock);
+ /* Now, handle all the async events */
+ while (!list_empty(&phba->sli4_hba.sp_asynce_work_queue)) {
+ /* Get the first event from the head of the event queue */
+ spin_lock_irq(&phba->hbalock);
+ list_remove_head(&phba->sli4_hba.sp_asynce_work_queue,
+ cq_event, struct lpfc_cq_event, list);
+ spin_unlock_irq(&phba->hbalock);
+ /* Process the asynchronous event */
+ switch (bf_get(lpfc_trailer_code, &cq_event->cqe.mcqe_cmpl)) {
+ case LPFC_TRAILER_CODE_LINK:
+ lpfc_sli4_async_link_evt(phba,
+ &cq_event->cqe.acqe_link);
+ break;
+ case LPFC_TRAILER_CODE_FCOE:
+ lpfc_sli4_async_fcoe_evt(phba,
+ &cq_event->cqe.acqe_fcoe);
+ break;
+ case LPFC_TRAILER_CODE_DCBX:
+ lpfc_sli4_async_dcbx_evt(phba,
+ &cq_event->cqe.acqe_dcbx);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "1804 Invalid asynchrous event code: "
+ "x%x\n", bf_get(lpfc_trailer_code,
+ &cq_event->cqe.mcqe_cmpl));
+ break;
+ }
+ /* Free the completion event processed to the free pool */
+ lpfc_sli4_cq_event_release(phba, cq_event);
+ }
+}
+
+/**
+ * lpfc_api_table_setup - Set up per hba pci-device group func api jump table
+ * @phba: pointer to lpfc hba data structure.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine is invoked to set up the per HBA PCI-Device group function
+ * API jump table entries.
+ *
+ * Return: 0 if success, otherwise -ENODEV
+ **/
+int
+lpfc_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+ int rc;
+
+ /* Set up lpfc PCI-device group */
+ phba->pci_dev_grp = dev_grp;
+
+ /* The LPFC_PCI_DEV_OC uses SLI4 */
+ if (dev_grp == LPFC_PCI_DEV_OC)
+ phba->sli_rev = LPFC_SLI_REV4;
+
+ /* Set up device INIT API function jump table */
+ rc = lpfc_init_api_table_setup(phba, dev_grp);
+ if (rc)
+ return -ENODEV;
+ /* Set up SCSI API function jump table */
+ rc = lpfc_scsi_api_table_setup(phba, dev_grp);
+ if (rc)
+ return -ENODEV;
+ /* Set up SLI API function jump table */
+ rc = lpfc_sli_api_table_setup(phba, dev_grp);
+ if (rc)
+ return -ENODEV;
+ /* Set up MBOX API function jump table */
+ rc = lpfc_mbox_api_table_setup(phba, dev_grp);
+ if (rc)
+ return -ENODEV;
+
+ return 0;
+}
+
+/**
+ * lpfc_log_intr_mode - Log the active interrupt mode
+ * @phba: pointer to lpfc hba data structure.
+ * @intr_mode: active interrupt mode adopted.
+ *
+ * This routine it invoked to log the currently used active interrupt mode
+ * to the device.
+ **/
+static void lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode)
+{
+ switch (intr_mode) {
+ case 0:
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0470 Enable INTx interrupt mode.\n");
+ break;
+ case 1:
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0481 Enabled MSI interrupt mode.\n");
+ break;
+ case 2:
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0480 Enabled MSI-X interrupt mode.\n");
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0482 Illegal interrupt mode.\n");
+ break;
+ }
+ return;
+}
+
+/**
+ * lpfc_enable_pci_dev - Enable a generic PCI device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the PCI device that is common to all
+ * PCI devices.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_enable_pci_dev(struct lpfc_hba *phba)
+{
+ struct pci_dev *pdev;
+ int bars;
+
+ /* Obtain PCI device reference */
+ if (!phba->pcidev)
+ goto out_error;
+ else
+ pdev = phba->pcidev;
+ /* Select PCI BARs */
+ bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ /* Enable PCI device */
+ if (pci_enable_device_mem(pdev))
+ goto out_error;
+ /* Request PCI resource for the device */
+ if (pci_request_selected_regions(pdev, bars, LPFC_DRIVER_NAME))
+ goto out_disable_device;
+ /* Set up device as PCI master and save state for EEH */
+ pci_set_master(pdev);
+ pci_try_set_mwi(pdev);
+ pci_save_state(pdev);
+
+ return 0;
+
+out_disable_device:
+ pci_disable_device(pdev);
+out_error:
+ return -ENODEV;
+}
+
+/**
+ * lpfc_disable_pci_dev - Disable a generic PCI device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable the PCI device that is common to all
+ * PCI devices.
+ **/
+static void
+lpfc_disable_pci_dev(struct lpfc_hba *phba)
+{
+ struct pci_dev *pdev;
+ int bars;
+
+ /* Obtain PCI device reference */
+ if (!phba->pcidev)
+ return;
+ else
+ pdev = phba->pcidev;
+ /* Select PCI BARs */
+ bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ /* Release PCI resource and disable PCI device */
+ pci_release_selected_regions(pdev, bars);
+ pci_disable_device(pdev);
+ /* Null out PCI private reference to driver */
+ pci_set_drvdata(pdev, NULL);
+
+ return;
+}
+
+/**
+ * lpfc_reset_hba - Reset a hba
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to reset a hba device. It brings the HBA
+ * offline, performs a board restart, and then brings the board back
+ * online. The lpfc_offline calls lpfc_sli_hba_down which will clean up
+ * on outstanding mailbox commands.
+ **/
+void
+lpfc_reset_hba(struct lpfc_hba *phba)
+{
+ /* If resets are disabled then set error state and return. */
+ if (!phba->cfg_enable_hba_reset) {
+ phba->link_state = LPFC_HBA_ERROR;
+ return;
+ }
+ lpfc_offline_prep(phba);
+ lpfc_offline(phba);
+ lpfc_sli_brdrestart(phba);
+ lpfc_online(phba);
+ lpfc_unblock_mgmt_io(phba);
+}
+
+/**
+ * lpfc_sli_driver_resource_setup - Setup driver internal resources for SLI3 dev.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources specific to
+ * support the SLI-3 HBA device it attached to.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_sli_driver_resource_setup(struct lpfc_hba *phba)
+{
+ struct lpfc_sli *psli;
+
+ /*
+ * Initialize timers used by driver
+ */
+
+ /* Heartbeat timer */
+ init_timer(&phba->hb_tmofunc);
+ phba->hb_tmofunc.function = lpfc_hb_timeout;
+ phba->hb_tmofunc.data = (unsigned long)phba;
+
+ psli = &phba->sli;
+ /* MBOX heartbeat timer */
+ init_timer(&psli->mbox_tmo);
+ psli->mbox_tmo.function = lpfc_mbox_timeout;
+ psli->mbox_tmo.data = (unsigned long) phba;
+ /* FCP polling mode timer */
+ init_timer(&phba->fcp_poll_timer);
+ phba->fcp_poll_timer.function = lpfc_poll_timeout;
+ phba->fcp_poll_timer.data = (unsigned long) phba;
+ /* Fabric block timer */
+ init_timer(&phba->fabric_block_timer);
+ phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
+ phba->fabric_block_timer.data = (unsigned long) phba;
+ /* EA polling mode timer */
+ init_timer(&phba->eratt_poll);
+ phba->eratt_poll.function = lpfc_poll_eratt;
+ phba->eratt_poll.data = (unsigned long) phba;
+
+ /* Host attention work mask setup */
+ phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT);
+ phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4));
+
+ /* Get all the module params for configuring this host */
+ lpfc_get_cfgparam(phba);
+ /*
+ * Since the sg_tablesize is module parameter, the sg_dma_buf_size
+ * used to create the sg_dma_buf_pool must be dynamically calculated.
+ * 2 segments are added since the IOCB needs a command and response bde.
+ */
+ phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp) +
+ ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));
+
+ if (phba->cfg_enable_bg) {
+ phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SEG_CNT;
+ phba->cfg_sg_dma_buf_size +=
+ phba->cfg_prot_sg_seg_cnt * sizeof(struct ulp_bde64);
+ }
+
+ /* Also reinitialize the host templates with new values. */
+ lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+ lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+
+ phba->max_vpi = LPFC_MAX_VPI;
+ /* This will be set to correct value after config_port mbox */
+ phba->max_vports = 0;
+
+ /*
+ * Initialize the SLI Layer to run with lpfc HBAs.
+ */
+ lpfc_sli_setup(phba);
+ lpfc_sli_queue_setup(phba);
+
+ /* Allocate device driver memory */
+ if (lpfc_mem_alloc(phba, BPL_ALIGN_SZ))
+ return -ENOMEM;
+
+ return 0;
+}
+
+/**
+ * lpfc_sli_driver_resource_unset - Unset drvr internal resources for SLI3 dev
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the driver internal resources set up
+ * specific for supporting the SLI-3 HBA device it attached to.
+ **/
+static void
+lpfc_sli_driver_resource_unset(struct lpfc_hba *phba)
+{
+ /* Free device driver memory allocated */
+ lpfc_mem_free_all(phba);
+
+ return;
+}
+
+/**
+ * lpfc_sli4_driver_resource_setup - Setup drvr internal resources for SLI4 dev
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources specific to
+ * support the SLI-4 HBA device it attached to.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
+{
+ struct lpfc_sli *psli;
+ int rc;
+ int i, hbq_count;
+
+ /* Before proceed, wait for POST done and device ready */
+ rc = lpfc_sli4_post_status_check(phba);
+ if (rc)
+ return -ENODEV;
+
+ /*
+ * Initialize timers used by driver
+ */
+
+ /* Heartbeat timer */
+ init_timer(&phba->hb_tmofunc);
+ phba->hb_tmofunc.function = lpfc_hb_timeout;
+ phba->hb_tmofunc.data = (unsigned long)phba;
+
+ psli = &phba->sli;
+ /* MBOX heartbeat timer */
+ init_timer(&psli->mbox_tmo);
+ psli->mbox_tmo.function = lpfc_mbox_timeout;
+ psli->mbox_tmo.data = (unsigned long) phba;
+ /* Fabric block timer */
+ init_timer(&phba->fabric_block_timer);
+ phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
+ phba->fabric_block_timer.data = (unsigned long) phba;
+ /* EA polling mode timer */
+ init_timer(&phba->eratt_poll);
+ phba->eratt_poll.function = lpfc_poll_eratt;
+ phba->eratt_poll.data = (unsigned long) phba;
+ /*
+ * We need to do a READ_CONFIG mailbox command here before
+ * calling lpfc_get_cfgparam. For VFs this will report the
+ * MAX_XRI, MAX_VPI, MAX_RPI, MAX_IOCB, and MAX_VFI settings.
+ * All of the resources allocated
+ * for this Port are tied to these values.
+ */
+ /* Get all the module params for configuring this host */
+ lpfc_get_cfgparam(phba);
+ phba->max_vpi = LPFC_MAX_VPI;
+ /* This will be set to correct value after the read_config mbox */
+ phba->max_vports = 0;
+
+ /* Program the default value of vlan_id and fc_map */
+ phba->valid_vlan = 0;
+ phba->fc_map[0] = LPFC_FCOE_FCF_MAP0;
+ phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
+ phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
+
+ /*
+ * Since the sg_tablesize is module parameter, the sg_dma_buf_size
+ * used to create the sg_dma_buf_pool must be dynamically calculated.
+ * 2 segments are added since the IOCB needs a command and response bde.
+ * To insure that the scsi sgl does not cross a 4k page boundary only
+ * sgl sizes of 1k, 2k, 4k, and 8k are supported.
+ * Table of sgl sizes and seg_cnt:
+ * sgl size, sg_seg_cnt total seg
+ * 1k 50 52
+ * 2k 114 116
+ * 4k 242 244
+ * 8k 498 500
+ * cmd(32) + rsp(160) + (52 * sizeof(sli4_sge)) = 1024
+ * cmd(32) + rsp(160) + (116 * sizeof(sli4_sge)) = 2048
+ * cmd(32) + rsp(160) + (244 * sizeof(sli4_sge)) = 4096
+ * cmd(32) + rsp(160) + (500 * sizeof(sli4_sge)) = 8192
+ */
+ if (phba->cfg_sg_seg_cnt <= LPFC_DEFAULT_SG_SEG_CNT)
+ phba->cfg_sg_seg_cnt = 50;
+ else if (phba->cfg_sg_seg_cnt <= 114)
+ phba->cfg_sg_seg_cnt = 114;
+ else if (phba->cfg_sg_seg_cnt <= 242)
+ phba->cfg_sg_seg_cnt = 242;
+ else
+ phba->cfg_sg_seg_cnt = 498;
+
+ phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd)
+ + sizeof(struct fcp_rsp);
+ phba->cfg_sg_dma_buf_size +=
+ ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge));
+
+ /* Initialize buffer queue management fields */
+ hbq_count = lpfc_sli_hbq_count();
+ for (i = 0; i < hbq_count; ++i)
+ INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
+ INIT_LIST_HEAD(&phba->rb_pend_list);
+ phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_sli4_rb_alloc;
+ phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_sli4_rb_free;
+
+ /*
+ * Initialize the SLI Layer to run with lpfc SLI4 HBAs.
+ */
+ /* Initialize the Abort scsi buffer list used by driver */
+ spin_lock_init(&phba->sli4_hba.abts_scsi_buf_list_lock);
+ INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_scsi_buf_list);
+ /* This abort list used by worker thread */
+ spin_lock_init(&phba->sli4_hba.abts_sgl_list_lock);
+
+ /*
+ * Initialize dirver internal slow-path work queues
+ */
+
+ /* Driver internel slow-path CQ Event pool */
+ INIT_LIST_HEAD(&phba->sli4_hba.sp_cqe_event_pool);
+ /* Response IOCB work queue list */
+ INIT_LIST_HEAD(&phba->sli4_hba.sp_rspiocb_work_queue);
+ /* Asynchronous event CQ Event work queue list */
+ INIT_LIST_HEAD(&phba->sli4_hba.sp_asynce_work_queue);
+ /* Fast-path XRI aborted CQ Event work queue list */
+ INIT_LIST_HEAD(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue);
+ /* Slow-path XRI aborted CQ Event work queue list */
+ INIT_LIST_HEAD(&phba->sli4_hba.sp_els_xri_aborted_work_queue);
+ /* Receive queue CQ Event work queue list */
+ INIT_LIST_HEAD(&phba->sli4_hba.sp_unsol_work_queue);
+
+ /* Initialize the driver internal SLI layer lists. */
+ lpfc_sli_setup(phba);
+ lpfc_sli_queue_setup(phba);
+
+ /* Allocate device driver memory */
+ rc = lpfc_mem_alloc(phba, SGL_ALIGN_SZ);
+ if (rc)
+ return -ENOMEM;
+
+ /* Create the bootstrap mailbox command */
+ rc = lpfc_create_bootstrap_mbox(phba);
+ if (unlikely(rc))
+ goto out_free_mem;
+
+ /* Set up the host's endian order with the device. */
+ rc = lpfc_setup_endian_order(phba);
+ if (unlikely(rc))
+ goto out_free_bsmbx;
+
+ /* Set up the hba's configuration parameters. */
+ rc = lpfc_sli4_read_config(phba);
+ if (unlikely(rc))
+ goto out_free_bsmbx;
+
+ /* Perform a function reset */
+ rc = lpfc_pci_function_reset(phba);
+ if (unlikely(rc))
+ goto out_free_bsmbx;
+
+ /* Create all the SLI4 queues */
+ rc = lpfc_sli4_queue_create(phba);
+ if (rc)
+ goto out_free_bsmbx;
+
+ /* Create driver internal CQE event pool */
+ rc = lpfc_sli4_cq_event_pool_create(phba);
+ if (rc)
+ goto out_destroy_queue;
+
+ /* Initialize and populate the iocb list per host */
+ rc = lpfc_init_sgl_list(phba);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1400 Failed to initialize sgl list.\n");
+ goto out_destroy_cq_event_pool;
+ }
+ rc = lpfc_init_active_sgl_array(phba);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1430 Failed to initialize sgl list.\n");
+ goto out_free_sgl_list;
+ }
+
+ rc = lpfc_sli4_init_rpi_hdrs(phba);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1432 Failed to initialize rpi headers.\n");
+ goto out_free_active_sgl;
+ }
+
+ phba->sli4_hba.fcp_eq_hdl = kzalloc((sizeof(struct lpfc_fcp_eq_hdl) *
+ phba->cfg_fcp_eq_count), GFP_KERNEL);
+ if (!phba->sli4_hba.fcp_eq_hdl) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2572 Failed allocate memory for fast-path "
+ "per-EQ handle array\n");
+ goto out_remove_rpi_hdrs;
+ }
+
+ phba->sli4_hba.msix_entries = kzalloc((sizeof(struct msix_entry) *
+ phba->sli4_hba.cfg_eqn), GFP_KERNEL);
+ if (!phba->sli4_hba.msix_entries) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2573 Failed allocate memory for msi-x "
+ "interrupt vector entries\n");
+ goto out_free_fcp_eq_hdl;
+ }
+
+ return rc;
+
+out_free_fcp_eq_hdl:
+ kfree(phba->sli4_hba.fcp_eq_hdl);
+out_remove_rpi_hdrs:
+ lpfc_sli4_remove_rpi_hdrs(phba);
+out_free_active_sgl:
+ lpfc_free_active_sgl(phba);
+out_free_sgl_list:
+ lpfc_free_sgl_list(phba);
+out_destroy_cq_event_pool:
+ lpfc_sli4_cq_event_pool_destroy(phba);
+out_destroy_queue:
+ lpfc_sli4_queue_destroy(phba);
+out_free_bsmbx:
+ lpfc_destroy_bootstrap_mbox(phba);
+out_free_mem:
+ lpfc_mem_free(phba);
+ return rc;
+}
+
+/**
+ * lpfc_sli4_driver_resource_unset - Unset drvr internal resources for SLI4 dev
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the driver internal resources set up
+ * specific for supporting the SLI-4 HBA device it attached to.
+ **/
+static void
+lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba)
+{
+ struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry;
+
+ /* unregister default FCFI from the HBA */
+ lpfc_sli4_fcfi_unreg(phba, phba->fcf.fcfi);
+
+ /* Free the default FCR table */
+ lpfc_sli_remove_dflt_fcf(phba);
+
+ /* Free memory allocated for msi-x interrupt vector entries */
+ kfree(phba->sli4_hba.msix_entries);
+
+ /* Free memory allocated for fast-path work queue handles */
+ kfree(phba->sli4_hba.fcp_eq_hdl);
+
+ /* Free the allocated rpi headers. */
+ lpfc_sli4_remove_rpi_hdrs(phba);
+
+ /* Free the ELS sgl list */
+ lpfc_free_active_sgl(phba);
+ lpfc_free_sgl_list(phba);
+
+ /* Free the SCSI sgl management array */
+ kfree(phba->sli4_hba.lpfc_scsi_psb_array);
+
+ /* Free the SLI4 queues */
+ lpfc_sli4_queue_destroy(phba);
+
+ /* Free the completion queue EQ event pool */
+ lpfc_sli4_cq_event_release_all(phba);
+ lpfc_sli4_cq_event_pool_destroy(phba);
+
+ /* Reset SLI4 HBA FCoE function */
+ lpfc_pci_function_reset(phba);
+
+ /* Free the bsmbx region. */
+ lpfc_destroy_bootstrap_mbox(phba);
+
+ /* Free the SLI Layer memory with SLI4 HBAs */
+ lpfc_mem_free_all(phba);
+
+ /* Free the current connect table */
+ list_for_each_entry_safe(conn_entry, next_conn_entry,
+ &phba->fcf_conn_rec_list, list)
+ kfree(conn_entry);
+
+ return;
+}
+
+/**
+ * lpfc_init_api_table_setup - Set up init api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the device INIT interface API function jump table
+ * in @phba struct.
+ *
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+ switch (dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ phba->lpfc_hba_down_post = lpfc_hba_down_post_s3;
+ phba->lpfc_handle_eratt = lpfc_handle_eratt_s3;
+ phba->lpfc_stop_port = lpfc_stop_port_s3;
+ break;
+ case LPFC_PCI_DEV_OC:
+ phba->lpfc_hba_down_post = lpfc_hba_down_post_s4;
+ phba->lpfc_handle_eratt = lpfc_handle_eratt_s4;
+ phba->lpfc_stop_port = lpfc_stop_port_s4;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1431 Invalid HBA PCI-device group: 0x%x\n",
+ dev_grp);
+ return -ENODEV;
+ break;
+ }
+ return 0;
+}
+
+/**
+ * lpfc_setup_driver_resource_phase1 - Phase1 etup driver internal resources.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources before the
+ * device specific resource setup to support the HBA device it attached to.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_setup_driver_resource_phase1(struct lpfc_hba *phba)
+{
+ /*
+ * Driver resources common to all SLI revisions
+ */
+ atomic_set(&phba->fast_event_count, 0);
+ spin_lock_init(&phba->hbalock);
+
+ /* Initialize ndlp management spinlock */
+ spin_lock_init(&phba->ndlp_lock);
+
+ INIT_LIST_HEAD(&phba->port_list);
+ INIT_LIST_HEAD(&phba->work_list);
+ init_waitqueue_head(&phba->wait_4_mlo_m_q);
+
+ /* Initialize the wait queue head for the kernel thread */
+ init_waitqueue_head(&phba->work_waitq);
+
+ /* Initialize the scsi buffer list used by driver for scsi IO */
+ spin_lock_init(&phba->scsi_buf_list_lock);
+ INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list);
+
+ /* Initialize the fabric iocb list */
+ INIT_LIST_HEAD(&phba->fabric_iocb_list);
+
+ /* Initialize list to save ELS buffers */
+ INIT_LIST_HEAD(&phba->elsbuf);
+
+ /* Initialize FCF connection rec list */
+ INIT_LIST_HEAD(&phba->fcf_conn_rec_list);
+
+ return 0;
+}
+
+/**
+ * lpfc_setup_driver_resource_phase2 - Phase2 setup driver internal resources.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources after the
+ * device specific resource setup to support the HBA device it attached to.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_setup_driver_resource_phase2(struct lpfc_hba *phba)
+{
+ int error;
+
+ /* Startup the kernel thread for this host adapter. */
+ phba->worker_thread = kthread_run(lpfc_do_work, phba,
+ "lpfc_worker_%d", phba->brd_no);
+ if (IS_ERR(phba->worker_thread)) {
+ error = PTR_ERR(phba->worker_thread);
+ return error;
+ }
+
+ return 0;
+}
+
+/**
+ * lpfc_unset_driver_resource_phase2 - Phase2 unset driver internal resources.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the driver internal resources set up after
+ * the device specific resource setup for supporting the HBA device it
+ * attached to.
+ **/
+static void
+lpfc_unset_driver_resource_phase2(struct lpfc_hba *phba)
+{
+ /* Stop kernel worker thread */
+ kthread_stop(phba->worker_thread);
+}
+
+/**
+ * lpfc_free_iocb_list - Free iocb list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the driver's IOCB list and memory.
+ **/
+static void
+lpfc_free_iocb_list(struct lpfc_hba *phba)
+{
+ struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL;
+
+ spin_lock_irq(&phba->hbalock);
+ list_for_each_entry_safe(iocbq_entry, iocbq_next,
+ &phba->lpfc_iocb_list, list) {
+ list_del(&iocbq_entry->list);
+ kfree(iocbq_entry);
+ phba->total_iocbq_bufs--;
+ }
+ spin_unlock_irq(&phba->hbalock);
+
+ return;
+}
+
+/**
+ * lpfc_init_iocb_list - Allocate and initialize iocb list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate and initizlize the driver's IOCB
+ * list and set up the IOCB tag array accordingly.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_init_iocb_list(struct lpfc_hba *phba, int iocb_count)
+{
+ struct lpfc_iocbq *iocbq_entry = NULL;
+ uint16_t iotag;
+ int i;
+
+ /* Initialize and populate the iocb list per host. */
+ INIT_LIST_HEAD(&phba->lpfc_iocb_list);
+ for (i = 0; i < iocb_count; i++) {
+ iocbq_entry = kzalloc(sizeof(struct lpfc_iocbq), GFP_KERNEL);
+ if (iocbq_entry == NULL) {
+ printk(KERN_ERR "%s: only allocated %d iocbs of "
+ "expected %d count. Unloading driver.\n",
+ __func__, i, LPFC_IOCB_LIST_CNT);
+ goto out_free_iocbq;
+ }
+
+ iotag = lpfc_sli_next_iotag(phba, iocbq_entry);
+ if (iotag == 0) {
+ kfree(iocbq_entry);
+ printk(KERN_ERR "%s: failed to allocate IOTAG. "
+ "Unloading driver.\n", __func__);
+ goto out_free_iocbq;
+ }
+ iocbq_entry->sli4_xritag = NO_XRI;
+
+ spin_lock_irq(&phba->hbalock);
+ list_add(&iocbq_entry->list, &phba->lpfc_iocb_list);
+ phba->total_iocbq_bufs++;
+ spin_unlock_irq(&phba->hbalock);
+ }
+
+ return 0;
+
+out_free_iocbq:
+ lpfc_free_iocb_list(phba);
+
+ return -ENOMEM;
+}
+
+/**
+ * lpfc_free_sgl_list - Free sgl list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the driver's sgl list and memory.
+ **/
+static void
+lpfc_free_sgl_list(struct lpfc_hba *phba)
+{
+ struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
+ LIST_HEAD(sglq_list);
+ int rc = 0;
+
+ spin_lock_irq(&phba->hbalock);
+ list_splice_init(&phba->sli4_hba.lpfc_sgl_list, &sglq_list);
+ spin_unlock_irq(&phba->hbalock);
+
+ list_for_each_entry_safe(sglq_entry, sglq_next,
+ &sglq_list, list) {
+ list_del(&sglq_entry->list);
+ lpfc_mbuf_free(phba, sglq_entry->virt, sglq_entry->phys);
+ kfree(sglq_entry);
+ phba->sli4_hba.total_sglq_bufs--;
+ }
+ rc = lpfc_sli4_remove_all_sgl_pages(phba);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2005 Unable to deregister pages from HBA: %x", rc);
+ }
+ kfree(phba->sli4_hba.lpfc_els_sgl_array);
+}
+
+/**
+ * lpfc_init_active_sgl_array - Allocate the buf to track active ELS XRIs.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate the driver's active sgl memory.
+ * This array will hold the sglq_entry's for active IOs.
+ **/
+static int
+lpfc_init_active_sgl_array(struct lpfc_hba *phba)
+{
+ int size;
+ size = sizeof(struct lpfc_sglq *);
+ size *= phba->sli4_hba.max_cfg_param.max_xri;
+
+ phba->sli4_hba.lpfc_sglq_active_list =
+ kzalloc(size, GFP_KERNEL);
+ if (!phba->sli4_hba.lpfc_sglq_active_list)
+ return -ENOMEM;
+ return 0;
+}
+
+/**
+ * lpfc_free_active_sgl - Free the buf that tracks active ELS XRIs.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to walk through the array of active sglq entries
+ * and free all of the resources.
+ * This is just a place holder for now.
+ **/
+static void
+lpfc_free_active_sgl(struct lpfc_hba *phba)
+{
+ kfree(phba->sli4_hba.lpfc_sglq_active_list);
+}
+
+/**
+ * lpfc_init_sgl_list - Allocate and initialize sgl list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate and initizlize the driver's sgl
+ * list and set up the sgl xritag tag array accordingly.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_init_sgl_list(struct lpfc_hba *phba)
+{
+ struct lpfc_sglq *sglq_entry = NULL;
+ int i;
+ int els_xri_cnt;
+
+ els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "2400 lpfc_init_sgl_list els %d.\n",
+ els_xri_cnt);
+ /* Initialize and populate the sglq list per host/VF. */
+ INIT_LIST_HEAD(&phba->sli4_hba.lpfc_sgl_list);
+ INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_els_sgl_list);
+
+ /* Sanity check on XRI management */
+ if (phba->sli4_hba.max_cfg_param.max_xri <= els_xri_cnt) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2562 No room left for SCSI XRI allocation: "
+ "max_xri=%d, els_xri=%d\n",
+ phba->sli4_hba.max_cfg_param.max_xri,
+ els_xri_cnt);
+ return -ENOMEM;
+ }
+
+ /* Allocate memory for the ELS XRI management array */
+ phba->sli4_hba.lpfc_els_sgl_array =
+ kzalloc((sizeof(struct lpfc_sglq *) * els_xri_cnt),
+ GFP_KERNEL);
+
+ if (!phba->sli4_hba.lpfc_els_sgl_array) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2401 Failed to allocate memory for ELS "
+ "XRI management array of size %d.\n",
+ els_xri_cnt);
+ return -ENOMEM;
+ }
+
+ /* Keep the SCSI XRI into the XRI management array */
+ phba->sli4_hba.scsi_xri_max =
+ phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt;
+ phba->sli4_hba.scsi_xri_cnt = 0;
+
+ phba->sli4_hba.lpfc_scsi_psb_array =
+ kzalloc((sizeof(struct lpfc_scsi_buf *) *
+ phba->sli4_hba.scsi_xri_max), GFP_KERNEL);
+
+ if (!phba->sli4_hba.lpfc_scsi_psb_array) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2563 Failed to allocate memory for SCSI "
+ "XRI management array of size %d.\n",
+ phba->sli4_hba.scsi_xri_max);
+ kfree(phba->sli4_hba.lpfc_els_sgl_array);
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < els_xri_cnt; i++) {
+ sglq_entry = kzalloc(sizeof(struct lpfc_sglq), GFP_KERNEL);
+ if (sglq_entry == NULL) {
+ printk(KERN_ERR "%s: only allocated %d sgls of "
+ "expected %d count. Unloading driver.\n",
+ __func__, i, els_xri_cnt);
+ goto out_free_mem;
+ }
+
+ sglq_entry->sli4_xritag = lpfc_sli4_next_xritag(phba);
+ if (sglq_entry->sli4_xritag == NO_XRI) {
+ kfree(sglq_entry);
+ printk(KERN_ERR "%s: failed to allocate XRI.\n"
+ "Unloading driver.\n", __func__);
+ goto out_free_mem;
+ }
+ sglq_entry->buff_type = GEN_BUFF_TYPE;
+ sglq_entry->virt = lpfc_mbuf_alloc(phba, 0, &sglq_entry->phys);
+ if (sglq_entry->virt == NULL) {
+ kfree(sglq_entry);
+ printk(KERN_ERR "%s: failed to allocate mbuf.\n"
+ "Unloading driver.\n", __func__);
+ goto out_free_mem;
+ }
+ sglq_entry->sgl = sglq_entry->virt;
+ memset(sglq_entry->sgl, 0, LPFC_BPL_SIZE);
+
+ /* The list order is used by later block SGL registraton */
+ spin_lock_irq(&phba->hbalock);
+ list_add_tail(&sglq_entry->list, &phba->sli4_hba.lpfc_sgl_list);
+ phba->sli4_hba.lpfc_els_sgl_array[i] = sglq_entry;
+ phba->sli4_hba.total_sglq_bufs++;
+ spin_unlock_irq(&phba->hbalock);
+ }
+ return 0;
+
+out_free_mem:
+ kfree(phba->sli4_hba.lpfc_scsi_psb_array);
+ lpfc_free_sgl_list(phba);
+ return -ENOMEM;
+}
+
+/**
+ * lpfc_sli4_init_rpi_hdrs - Post the rpi header memory region to the port
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post rpi header templates to the
+ * HBA consistent with the SLI-4 interface spec. This routine
+ * posts a PAGE_SIZE memory region to the port to hold up to
+ * PAGE_SIZE modulo 64 rpi context headers.
+ * No locks are held here because this is an initialization routine
+ * called only from probe or lpfc_online when interrupts are not
+ * enabled and the driver is reinitializing the device.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *phba)
+{
+ int rc = 0;
+ int longs;
+ uint16_t rpi_count;
+ struct lpfc_rpi_hdr *rpi_hdr;
+
+ INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_hdr_list);
+
+ /*
+ * Provision an rpi bitmask range for discovery. The total count
+ * is the difference between max and base + 1.
+ */
+ rpi_count = phba->sli4_hba.max_cfg_param.rpi_base +
+ phba->sli4_hba.max_cfg_param.max_rpi - 1;
+
+ longs = ((rpi_count) + BITS_PER_LONG - 1) / BITS_PER_LONG;
+ phba->sli4_hba.rpi_bmask = kzalloc(longs * sizeof(unsigned long),
+ GFP_KERNEL);
+ if (!phba->sli4_hba.rpi_bmask)
+ return -ENOMEM;
+
+ rpi_hdr = lpfc_sli4_create_rpi_hdr(phba);
+ if (!rpi_hdr) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0391 Error during rpi post operation\n");
+ lpfc_sli4_remove_rpis(phba);
+ rc = -ENODEV;
+ }
+
+ return rc;
+}
+
+/**
+ * lpfc_sli4_create_rpi_hdr - Allocate an rpi header memory region
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate a single 4KB memory region to
+ * support rpis and stores them in the phba. This single region
+ * provides support for up to 64 rpis. The region is used globally
+ * by the device.
+ *
+ * Returns:
+ * A valid rpi hdr on success.
+ * A NULL pointer on any failure.
+ **/
+struct lpfc_rpi_hdr *
+lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba)
+{
+ uint16_t rpi_limit, curr_rpi_range;
+ struct lpfc_dmabuf *dmabuf;
+ struct lpfc_rpi_hdr *rpi_hdr;
+
+ rpi_limit = phba->sli4_hba.max_cfg_param.rpi_base +
+ phba->sli4_hba.max_cfg_param.max_rpi - 1;
+
+ spin_lock_irq(&phba->hbalock);
+ curr_rpi_range = phba->sli4_hba.next_rpi;
+ spin_unlock_irq(&phba->hbalock);
+
+ /*
+ * The port has a limited number of rpis. The increment here
+ * is LPFC_RPI_HDR_COUNT - 1 to account for the starting value
+ * and to allow the full max_rpi range per port.
+ */
+ if ((curr_rpi_range + (LPFC_RPI_HDR_COUNT - 1)) > rpi_limit)
+ return NULL;
+
+ /*
+ * First allocate the protocol header region for the port. The
+ * port expects a 4KB DMA-mapped memory region that is 4K aligned.
+ */
+ dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (!dmabuf)
+ return NULL;
+
+ dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+ LPFC_HDR_TEMPLATE_SIZE,
+ &dmabuf->phys,
+ GFP_KERNEL);
+ if (!dmabuf->virt) {
+ rpi_hdr = NULL;
+ goto err_free_dmabuf;
+ }
+
+ memset(dmabuf->virt, 0, LPFC_HDR_TEMPLATE_SIZE);
+ if (!IS_ALIGNED(dmabuf->phys, LPFC_HDR_TEMPLATE_SIZE)) {
+ rpi_hdr = NULL;
+ goto err_free_coherent;
+ }
+
+ /* Save the rpi header data for cleanup later. */
+ rpi_hdr = kzalloc(sizeof(struct lpfc_rpi_hdr), GFP_KERNEL);
+ if (!rpi_hdr)
+ goto err_free_coherent;
+
+ rpi_hdr->dmabuf = dmabuf;
+ rpi_hdr->len = LPFC_HDR_TEMPLATE_SIZE;
+ rpi_hdr->page_count = 1;
+ spin_lock_irq(&phba->hbalock);
+ rpi_hdr->start_rpi = phba->sli4_hba.next_rpi;
+ list_add_tail(&rpi_hdr->list, &phba->sli4_hba.lpfc_rpi_hdr_list);
+
+ /*
+ * The next_rpi stores the next module-64 rpi value to post
+ * in any subsequent rpi memory region postings.
+ */
+ phba->sli4_hba.next_rpi += LPFC_RPI_HDR_COUNT;
+ spin_unlock_irq(&phba->hbalock);
+ return rpi_hdr;
+
+ err_free_coherent:
+ dma_free_coherent(&phba->pcidev->dev, LPFC_HDR_TEMPLATE_SIZE,
+ dmabuf->virt, dmabuf->phys);
+ err_free_dmabuf:
+ kfree(dmabuf);
+ return NULL;
+}
+
+/**
+ * lpfc_sli4_remove_rpi_hdrs - Remove all rpi header memory regions
* @phba: pointer to lpfc hba data structure.
*
- * This routine is invoked to enable the MSI-X interrupt vectors. The kernel
- * function pci_enable_msix() is called to enable the MSI-X vectors. Note that
- * pci_enable_msix(), once invoked, enables either all or nothing, depending
- * on the current availability of PCI vector resources. The device driver is
- * responsible for calling the individual request_irq() to register each MSI-X
- * vector with a interrupt handler, which is done in this function. Note that
+ * This routine is invoked to remove all memory resources allocated
+ * to support rpis. This routine presumes the caller has released all
+ * rpis consumed by fabric or port logins and is prepared to have
+ * the header pages removed.
+ **/
+void
+lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba)
+{
+ struct lpfc_rpi_hdr *rpi_hdr, *next_rpi_hdr;
+
+ list_for_each_entry_safe(rpi_hdr, next_rpi_hdr,
+ &phba->sli4_hba.lpfc_rpi_hdr_list, list) {
+ list_del(&rpi_hdr->list);
+ dma_free_coherent(&phba->pcidev->dev, rpi_hdr->len,
+ rpi_hdr->dmabuf->virt, rpi_hdr->dmabuf->phys);
+ kfree(rpi_hdr->dmabuf);
+ kfree(rpi_hdr);
+ }
+
+ phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
+ memset(phba->sli4_hba.rpi_bmask, 0, sizeof(*phba->sli4_hba.rpi_bmask));
+}
+
+/**
+ * lpfc_hba_alloc - Allocate driver hba data structure for a device.
+ * @pdev: pointer to pci device data structure.
+ *
+ * This routine is invoked to allocate the driver hba data structure for an
+ * HBA device. If the allocation is successful, the phba reference to the
+ * PCI device data structure is set.
+ *
+ * Return codes
+ * pointer to @phba - sucessful
+ * NULL - error
+ **/
+static struct lpfc_hba *
+lpfc_hba_alloc(struct pci_dev *pdev)
+{
+ struct lpfc_hba *phba;
+
+ /* Allocate memory for HBA structure */
+ phba = kzalloc(sizeof(struct lpfc_hba), GFP_KERNEL);
+ if (!phba) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1417 Failed to allocate hba struct.\n");
+ return NULL;
+ }
+
+ /* Set reference to PCI device in HBA structure */
+ phba->pcidev = pdev;
+
+ /* Assign an unused board number */
+ phba->brd_no = lpfc_get_instance();
+ if (phba->brd_no < 0) {
+ kfree(phba);
+ return NULL;
+ }
+
+ return phba;
+}
+
+/**
+ * lpfc_hba_free - Free driver hba data structure with a device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the driver hba data structure with an
+ * HBA device.
+ **/
+static void
+lpfc_hba_free(struct lpfc_hba *phba)
+{
+ /* Release the driver assigned board number */
+ idr_remove(&lpfc_hba_index, phba->brd_no);
+
+ kfree(phba);
+ return;
+}
+
+/**
+ * lpfc_create_shost - Create hba physical port with associated scsi host.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to create HBA physical port and associate a SCSI
+ * host with it.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_create_shost(struct lpfc_hba *phba)
+{
+ struct lpfc_vport *vport;
+ struct Scsi_Host *shost;
+
+ /* Initialize HBA FC structure */
+ phba->fc_edtov = FF_DEF_EDTOV;
+ phba->fc_ratov = FF_DEF_RATOV;
+ phba->fc_altov = FF_DEF_ALTOV;
+ phba->fc_arbtov = FF_DEF_ARBTOV;
+
+ vport = lpfc_create_port(phba, phba->brd_no, &phba->pcidev->dev);
+ if (!vport)
+ return -ENODEV;
+
+ shost = lpfc_shost_from_vport(vport);
+ phba->pport = vport;
+ lpfc_debugfs_initialize(vport);
+ /* Put reference to SCSI host to driver's device private data */
+ pci_set_drvdata(phba->pcidev, shost);
+
+ return 0;
+}
+
+/**
+ * lpfc_destroy_shost - Destroy hba physical port with associated scsi host.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to destroy HBA physical port and the associated
+ * SCSI host.
+ **/
+static void
+lpfc_destroy_shost(struct lpfc_hba *phba)
+{
+ struct lpfc_vport *vport = phba->pport;
+
+ /* Destroy physical port that associated with the SCSI host */
+ destroy_port(vport);
+
+ return;
+}
+
+/**
+ * lpfc_setup_bg - Setup Block guard structures and debug areas.
+ * @phba: pointer to lpfc hba data structure.
+ * @shost: the shost to be used to detect Block guard settings.
+ *
+ * This routine sets up the local Block guard protocol settings for @shost.
+ * This routine also allocates memory for debugging bg buffers.
+ **/
+static void
+lpfc_setup_bg(struct lpfc_hba *phba, struct Scsi_Host *shost)
+{
+ int pagecnt = 10;
+ if (lpfc_prot_mask && lpfc_prot_guard) {
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "1478 Registering BlockGuard with the "
+ "SCSI layer\n");
+ scsi_host_set_prot(shost, lpfc_prot_mask);
+ scsi_host_set_guard(shost, lpfc_prot_guard);
+ }
+ if (!_dump_buf_data) {
+ while (pagecnt) {
+ spin_lock_init(&_dump_buf_lock);
+ _dump_buf_data =
+ (char *) __get_free_pages(GFP_KERNEL, pagecnt);
+ if (_dump_buf_data) {
+ printk(KERN_ERR "BLKGRD allocated %d pages for "
+ "_dump_buf_data at 0x%p\n",
+ (1 << pagecnt), _dump_buf_data);
+ _dump_buf_data_order = pagecnt;
+ memset(_dump_buf_data, 0,
+ ((1 << PAGE_SHIFT) << pagecnt));
+ break;
+ } else
+ --pagecnt;
+ }
+ if (!_dump_buf_data_order)
+ printk(KERN_ERR "BLKGRD ERROR unable to allocate "
+ "memory for hexdump\n");
+ } else
+ printk(KERN_ERR "BLKGRD already allocated _dump_buf_data=0x%p"
+ "\n", _dump_buf_data);
+ if (!_dump_buf_dif) {
+ while (pagecnt) {
+ _dump_buf_dif =
+ (char *) __get_free_pages(GFP_KERNEL, pagecnt);
+ if (_dump_buf_dif) {
+ printk(KERN_ERR "BLKGRD allocated %d pages for "
+ "_dump_buf_dif at 0x%p\n",
+ (1 << pagecnt), _dump_buf_dif);
+ _dump_buf_dif_order = pagecnt;
+ memset(_dump_buf_dif, 0,
+ ((1 << PAGE_SHIFT) << pagecnt));
+ break;
+ } else
+ --pagecnt;
+ }
+ if (!_dump_buf_dif_order)
+ printk(KERN_ERR "BLKGRD ERROR unable to allocate "
+ "memory for hexdump\n");
+ } else
+ printk(KERN_ERR "BLKGRD already allocated _dump_buf_dif=0x%p\n",
+ _dump_buf_dif);
+}
+
+/**
+ * lpfc_post_init_setup - Perform necessary device post initialization setup.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to perform all the necessary post initialization
+ * setup for the device.
+ **/
+static void
+lpfc_post_init_setup(struct lpfc_hba *phba)
+{
+ struct Scsi_Host *shost;
+ struct lpfc_adapter_event_header adapter_event;
+
+ /* Get the default values for Model Name and Description */
+ lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);
+
+ /*
+ * hba setup may have changed the hba_queue_depth so we need to
+ * adjust the value of can_queue.
+ */
+ shost = pci_get_drvdata(phba->pcidev);
+ shost->can_queue = phba->cfg_hba_queue_depth - 10;
+ if (phba->sli3_options & LPFC_SLI3_BG_ENABLED)
+ lpfc_setup_bg(phba, shost);
+
+ lpfc_host_attrib_init(shost);
+
+ if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
+ spin_lock_irq(shost->host_lock);
+ lpfc_poll_start_timer(phba);
+ spin_unlock_irq(shost->host_lock);
+ }
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0428 Perform SCSI scan\n");
+ /* Send board arrival event to upper layer */
+ adapter_event.event_type = FC_REG_ADAPTER_EVENT;
+ adapter_event.subcategory = LPFC_EVENT_ARRIVAL;
+ fc_host_post_vendor_event(shost, fc_get_event_number(),
+ sizeof(adapter_event),
+ (char *) &adapter_event,
+ LPFC_NL_VENDOR_ID);
+ return;
+}
+
+/**
+ * lpfc_sli_pci_mem_setup - Setup SLI3 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the PCI device memory space for device
+ * with SLI-3 interface spec.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_sli_pci_mem_setup(struct lpfc_hba *phba)
+{
+ struct pci_dev *pdev;
+ unsigned long bar0map_len, bar2map_len;
+ int i, hbq_count;
+ void *ptr;
+ int error = -ENODEV;
+
+ /* Obtain PCI device reference */
+ if (!phba->pcidev)
+ return error;
+ else
+ pdev = phba->pcidev;
+
+ /* Set the device DMA mask size */
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+ return error;
+
+ /* Get the bus address of Bar0 and Bar2 and the number of bytes
+ * required by each mapping.
+ */
+ phba->pci_bar0_map = pci_resource_start(pdev, 0);
+ bar0map_len = pci_resource_len(pdev, 0);
+
+ phba->pci_bar2_map = pci_resource_start(pdev, 2);
+ bar2map_len = pci_resource_len(pdev, 2);
+
+ /* Map HBA SLIM to a kernel virtual address. */
+ phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len);
+ if (!phba->slim_memmap_p) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "ioremap failed for SLIM memory.\n");
+ goto out;
+ }
+
+ /* Map HBA Control Registers to a kernel virtual address. */
+ phba->ctrl_regs_memmap_p = ioremap(phba->pci_bar2_map, bar2map_len);
+ if (!phba->ctrl_regs_memmap_p) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "ioremap failed for HBA control registers.\n");
+ goto out_iounmap_slim;
+ }
+
+ /* Allocate memory for SLI-2 structures */
+ phba->slim2p.virt = dma_alloc_coherent(&pdev->dev,
+ SLI2_SLIM_SIZE,
+ &phba->slim2p.phys,
+ GFP_KERNEL);
+ if (!phba->slim2p.virt)
+ goto out_iounmap;
+
+ memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE);
+ phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx);
+ phba->pcb = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, pcb));
+ phba->IOCBs = (phba->slim2p.virt +
+ offsetof(struct lpfc_sli2_slim, IOCBs));
+
+ phba->hbqslimp.virt = dma_alloc_coherent(&pdev->dev,
+ lpfc_sli_hbq_size(),
+ &phba->hbqslimp.phys,
+ GFP_KERNEL);
+ if (!phba->hbqslimp.virt)
+ goto out_free_slim;
+
+ hbq_count = lpfc_sli_hbq_count();
+ ptr = phba->hbqslimp.virt;
+ for (i = 0; i < hbq_count; ++i) {
+ phba->hbqs[i].hbq_virt = ptr;
+ INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
+ ptr += (lpfc_hbq_defs[i]->entry_count *
+ sizeof(struct lpfc_hbq_entry));
+ }
+ phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_els_hbq_alloc;
+ phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_els_hbq_free;
+
+ memset(phba->hbqslimp.virt, 0, lpfc_sli_hbq_size());
+
+ INIT_LIST_HEAD(&phba->rb_pend_list);
+
+ phba->MBslimaddr = phba->slim_memmap_p;
+ phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
+ phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
+ phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
+ phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
+
+ return 0;
+
+out_free_slim:
+ dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
+ phba->slim2p.virt, phba->slim2p.phys);
+out_iounmap:
+ iounmap(phba->ctrl_regs_memmap_p);
+out_iounmap_slim:
+ iounmap(phba->slim_memmap_p);
+out:
+ return error;
+}
+
+/**
+ * lpfc_sli_pci_mem_unset - Unset SLI3 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the PCI device memory space for device
+ * with SLI-3 interface spec.
+ **/
+static void
+lpfc_sli_pci_mem_unset(struct lpfc_hba *phba)
+{
+ struct pci_dev *pdev;
+
+ /* Obtain PCI device reference */
+ if (!phba->pcidev)
+ return;
+ else
+ pdev = phba->pcidev;
+
+ /* Free coherent DMA memory allocated */
+ dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
+ phba->hbqslimp.virt, phba->hbqslimp.phys);
+ dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
+ phba->slim2p.virt, phba->slim2p.phys);
+
+ /* I/O memory unmap */
+ iounmap(phba->ctrl_regs_memmap_p);
+ iounmap(phba->slim_memmap_p);
+
+ return;
+}
+
+/**
+ * lpfc_sli4_post_status_check - Wait for SLI4 POST done and check status
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to wait for SLI4 device Power On Self Test (POST)
+ * done and check status.
+ *
+ * Return 0 if successful, otherwise -ENODEV.
+ **/
+int
+lpfc_sli4_post_status_check(struct lpfc_hba *phba)
+{
+ struct lpfc_register sta_reg, uerrlo_reg, uerrhi_reg, scratchpad;
+ uint32_t onlnreg0, onlnreg1;
+ int i, port_error = -ENODEV;
+
+ if (!phba->sli4_hba.STAregaddr)
+ return -ENODEV;
+
+ /* With uncoverable error, log the error message and return error */
+ onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
+ onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
+ if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
+ uerrlo_reg.word0 = readl(phba->sli4_hba.UERRLOregaddr);
+ uerrhi_reg.word0 = readl(phba->sli4_hba.UERRHIregaddr);
+ if (uerrlo_reg.word0 || uerrhi_reg.word0) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1422 HBA Unrecoverable error: "
+ "uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
+ "online0_reg=0x%x, online1_reg=0x%x\n",
+ uerrlo_reg.word0, uerrhi_reg.word0,
+ onlnreg0, onlnreg1);
+ }
+ return -ENODEV;
+ }
+
+ /* Wait up to 30 seconds for the SLI Port POST done and ready */
+ for (i = 0; i < 3000; i++) {
+ sta_reg.word0 = readl(phba->sli4_hba.STAregaddr);
+ /* Encounter fatal POST error, break out */
+ if (bf_get(lpfc_hst_state_perr, &sta_reg)) {
+ port_error = -ENODEV;
+ break;
+ }
+ if (LPFC_POST_STAGE_ARMFW_READY ==
+ bf_get(lpfc_hst_state_port_status, &sta_reg)) {
+ port_error = 0;
+ break;
+ }
+ msleep(10);
+ }
+
+ if (port_error)
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1408 Failure HBA POST Status: sta_reg=0x%x, "
+ "perr=x%x, sfi=x%x, nip=x%x, ipc=x%x, xrom=x%x, "
+ "dl=x%x, pstatus=x%x\n", sta_reg.word0,
+ bf_get(lpfc_hst_state_perr, &sta_reg),
+ bf_get(lpfc_hst_state_sfi, &sta_reg),
+ bf_get(lpfc_hst_state_nip, &sta_reg),
+ bf_get(lpfc_hst_state_ipc, &sta_reg),
+ bf_get(lpfc_hst_state_xrom, &sta_reg),
+ bf_get(lpfc_hst_state_dl, &sta_reg),
+ bf_get(lpfc_hst_state_port_status, &sta_reg));
+
+ /* Log device information */
+ scratchpad.word0 = readl(phba->sli4_hba.SCRATCHPADregaddr);
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2534 Device Info: ChipType=0x%x, SliRev=0x%x, "
+ "FeatureL1=0x%x, FeatureL2=0x%x\n",
+ bf_get(lpfc_scratchpad_chiptype, &scratchpad),
+ bf_get(lpfc_scratchpad_slirev, &scratchpad),
+ bf_get(lpfc_scratchpad_featurelevel1, &scratchpad),
+ bf_get(lpfc_scratchpad_featurelevel2, &scratchpad));
+
+ return port_error;
+}
+
+/**
+ * lpfc_sli4_bar0_register_memmap - Set up SLI4 BAR0 register memory map.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up SLI4 BAR0 PCI config space register
+ * memory map.
+ **/
+static void
+lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba)
+{
+ phba->sli4_hba.UERRLOregaddr = phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_UERR_STATUS_LO;
+ phba->sli4_hba.UERRHIregaddr = phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_UERR_STATUS_HI;
+ phba->sli4_hba.ONLINE0regaddr = phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_ONLINE0;
+ phba->sli4_hba.ONLINE1regaddr = phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_ONLINE1;
+ phba->sli4_hba.SCRATCHPADregaddr = phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_SCRATCHPAD;
+}
+
+/**
+ * lpfc_sli4_bar1_register_memmap - Set up SLI4 BAR1 register memory map.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up SLI4 BAR1 control status register (CSR)
+ * memory map.
+ **/
+static void
+lpfc_sli4_bar1_register_memmap(struct lpfc_hba *phba)
+{
+
+ phba->sli4_hba.STAregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+ LPFC_HST_STATE;
+ phba->sli4_hba.ISRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+ LPFC_HST_ISR0;
+ phba->sli4_hba.IMRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+ LPFC_HST_IMR0;
+ phba->sli4_hba.ISCRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+ LPFC_HST_ISCR0;
+ return;
+}
+
+/**
+ * lpfc_sli4_bar2_register_memmap - Set up SLI4 BAR2 register memory map.
+ * @phba: pointer to lpfc hba data structure.
+ * @vf: virtual function number
+ *
+ * This routine is invoked to set up SLI4 BAR2 doorbell register memory map
+ * based on the given viftual function number, @vf.
+ *
+ * Return 0 if successful, otherwise -ENODEV.
+ **/
+static int
+lpfc_sli4_bar2_register_memmap(struct lpfc_hba *phba, uint32_t vf)
+{
+ if (vf > LPFC_VIR_FUNC_MAX)
+ return -ENODEV;
+
+ phba->sli4_hba.RQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+ vf * LPFC_VFR_PAGE_SIZE + LPFC_RQ_DOORBELL);
+ phba->sli4_hba.WQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+ vf * LPFC_VFR_PAGE_SIZE + LPFC_WQ_DOORBELL);
+ phba->sli4_hba.EQCQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+ vf * LPFC_VFR_PAGE_SIZE + LPFC_EQCQ_DOORBELL);
+ phba->sli4_hba.MQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+ vf * LPFC_VFR_PAGE_SIZE + LPFC_MQ_DOORBELL);
+ phba->sli4_hba.BMBXregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+ vf * LPFC_VFR_PAGE_SIZE + LPFC_BMBX);
+ return 0;
+}
+
+/**
+ * lpfc_create_bootstrap_mbox - Create the bootstrap mailbox
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to create the bootstrap mailbox
+ * region consistent with the SLI-4 interface spec. This
+ * routine allocates all memory necessary to communicate
+ * mailbox commands to the port and sets up all alignment
+ * needs. No locks are expected to be held when calling
+ * this routine.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - could not allocated memory.
+ **/
+static int
+lpfc_create_bootstrap_mbox(struct lpfc_hba *phba)
+{
+ uint32_t bmbx_size;
+ struct lpfc_dmabuf *dmabuf;
+ struct dma_address *dma_address;
+ uint32_t pa_addr;
+ uint64_t phys_addr;
+
+ dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (!dmabuf)
+ return -ENOMEM;
+
+ /*
+ * The bootstrap mailbox region is comprised of 2 parts
+ * plus an alignment restriction of 16 bytes.
+ */
+ bmbx_size = sizeof(struct lpfc_bmbx_create) + (LPFC_ALIGN_16_BYTE - 1);
+ dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+ bmbx_size,
+ &dmabuf->phys,
+ GFP_KERNEL);
+ if (!dmabuf->virt) {
+ kfree(dmabuf);
+ return -ENOMEM;
+ }
+ memset(dmabuf->virt, 0, bmbx_size);
+
+ /*
+ * Initialize the bootstrap mailbox pointers now so that the register
+ * operations are simple later. The mailbox dma address is required
+ * to be 16-byte aligned. Also align the virtual memory as each
+ * maibox is copied into the bmbx mailbox region before issuing the
+ * command to the port.
+ */
+ phba->sli4_hba.bmbx.dmabuf = dmabuf;
+ phba->sli4_hba.bmbx.bmbx_size = bmbx_size;
+
+ phba->sli4_hba.bmbx.avirt = PTR_ALIGN(dmabuf->virt,
+ LPFC_ALIGN_16_BYTE);
+ phba->sli4_hba.bmbx.aphys = ALIGN(dmabuf->phys,
+ LPFC_ALIGN_16_BYTE);
+
+ /*
+ * Set the high and low physical addresses now. The SLI4 alignment
+ * requirement is 16 bytes and the mailbox is posted to the port
+ * as two 30-bit addresses. The other data is a bit marking whether
+ * the 30-bit address is the high or low address.
+ * Upcast bmbx aphys to 64bits so shift instruction compiles
+ * clean on 32 bit machines.
+ */
+ dma_address = &phba->sli4_hba.bmbx.dma_address;
+ phys_addr = (uint64_t)phba->sli4_hba.bmbx.aphys;
+ pa_addr = (uint32_t) ((phys_addr >> 34) & 0x3fffffff);
+ dma_address->addr_hi = (uint32_t) ((pa_addr << 2) |
+ LPFC_BMBX_BIT1_ADDR_HI);
+
+ pa_addr = (uint32_t) ((phba->sli4_hba.bmbx.aphys >> 4) & 0x3fffffff);
+ dma_address->addr_lo = (uint32_t) ((pa_addr << 2) |
+ LPFC_BMBX_BIT1_ADDR_LO);
+ return 0;
+}
+
+/**
+ * lpfc_destroy_bootstrap_mbox - Destroy all bootstrap mailbox resources
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to teardown the bootstrap mailbox
+ * region and release all host resources. This routine requires
+ * the caller to ensure all mailbox commands recovered, no
+ * additional mailbox comands are sent, and interrupts are disabled
+ * before calling this routine.
+ *
+ **/
+static void
+lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba)
+{
+ dma_free_coherent(&phba->pcidev->dev,
+ phba->sli4_hba.bmbx.bmbx_size,
+ phba->sli4_hba.bmbx.dmabuf->virt,
+ phba->sli4_hba.bmbx.dmabuf->phys);
+
+ kfree(phba->sli4_hba.bmbx.dmabuf);
+ memset(&phba->sli4_hba.bmbx, 0, sizeof(struct lpfc_bmbx));
+}
+
+/**
+ * lpfc_sli4_read_config - Get the config parameters.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to read the configuration parameters from the HBA.
+ * The configuration parameters are used to set the base and maximum values
+ * for RPI's XRI's VPI's VFI's and FCFIs. These values also affect the resource
+ * allocation for the port.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+static int
+lpfc_sli4_read_config(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *pmb;
+ struct lpfc_mbx_read_config *rd_config;
+ uint32_t rc = 0;
+
+ pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!pmb) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2011 Unable to allocate memory for issuing "
+ "SLI_CONFIG_SPECIAL mailbox command\n");
+ return -ENOMEM;
+ }
+
+ lpfc_read_config(phba, pmb);
+
+ rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
+ if (rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2012 Mailbox failed , mbxCmd x%x "
+ "READ_CONFIG, mbxStatus x%x\n",
+ bf_get(lpfc_mqe_command, &pmb->u.mqe),
+ bf_get(lpfc_mqe_status, &pmb->u.mqe));
+ rc = -EIO;
+ } else {
+ rd_config = &pmb->u.mqe.un.rd_config;
+ phba->sli4_hba.max_cfg_param.max_xri =
+ bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
+ phba->sli4_hba.max_cfg_param.xri_base =
+ bf_get(lpfc_mbx_rd_conf_xri_base, rd_config);
+ phba->sli4_hba.max_cfg_param.max_vpi =
+ bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config);
+ phba->sli4_hba.max_cfg_param.vpi_base =
+ bf_get(lpfc_mbx_rd_conf_vpi_base, rd_config);
+ phba->sli4_hba.max_cfg_param.max_rpi =
+ bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config);
+ phba->sli4_hba.max_cfg_param.rpi_base =
+ bf_get(lpfc_mbx_rd_conf_rpi_base, rd_config);
+ phba->sli4_hba.max_cfg_param.max_vfi =
+ bf_get(lpfc_mbx_rd_conf_vfi_count, rd_config);
+ phba->sli4_hba.max_cfg_param.vfi_base =
+ bf_get(lpfc_mbx_rd_conf_vfi_base, rd_config);
+ phba->sli4_hba.max_cfg_param.max_fcfi =
+ bf_get(lpfc_mbx_rd_conf_fcfi_count, rd_config);
+ phba->sli4_hba.max_cfg_param.fcfi_base =
+ bf_get(lpfc_mbx_rd_conf_fcfi_base, rd_config);
+ phba->sli4_hba.max_cfg_param.max_eq =
+ bf_get(lpfc_mbx_rd_conf_eq_count, rd_config);
+ phba->sli4_hba.max_cfg_param.max_rq =
+ bf_get(lpfc_mbx_rd_conf_rq_count, rd_config);
+ phba->sli4_hba.max_cfg_param.max_wq =
+ bf_get(lpfc_mbx_rd_conf_wq_count, rd_config);
+ phba->sli4_hba.max_cfg_param.max_cq =
+ bf_get(lpfc_mbx_rd_conf_cq_count, rd_config);
+ phba->lmt = bf_get(lpfc_mbx_rd_conf_lmt, rd_config);
+ phba->sli4_hba.next_xri = phba->sli4_hba.max_cfg_param.xri_base;
+ phba->vpi_base = phba->sli4_hba.max_cfg_param.vpi_base;
+ phba->vfi_base = phba->sli4_hba.max_cfg_param.vfi_base;
+ phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
+ phba->max_vpi = phba->sli4_hba.max_cfg_param.max_vpi;
+ phba->max_vports = phba->max_vpi;
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "2003 cfg params XRI(B:%d M:%d), "
+ "VPI(B:%d M:%d) "
+ "VFI(B:%d M:%d) "
+ "RPI(B:%d M:%d) "
+ "FCFI(B:%d M:%d)\n",
+ phba->sli4_hba.max_cfg_param.xri_base,
+ phba->sli4_hba.max_cfg_param.max_xri,
+ phba->sli4_hba.max_cfg_param.vpi_base,
+ phba->sli4_hba.max_cfg_param.max_vpi,
+ phba->sli4_hba.max_cfg_param.vfi_base,
+ phba->sli4_hba.max_cfg_param.max_vfi,
+ phba->sli4_hba.max_cfg_param.rpi_base,
+ phba->sli4_hba.max_cfg_param.max_rpi,
+ phba->sli4_hba.max_cfg_param.fcfi_base,
+ phba->sli4_hba.max_cfg_param.max_fcfi);
+ }
+ mempool_free(pmb, phba->mbox_mem_pool);
+
+ /* Reset the DFT_HBA_Q_DEPTH to the max xri */
+ if (phba->cfg_hba_queue_depth > (phba->sli4_hba.max_cfg_param.max_xri))
+ phba->cfg_hba_queue_depth =
+ phba->sli4_hba.max_cfg_param.max_xri;
+ return rc;
+}
+
+/**
+ * lpfc_dev_endian_order_setup - Notify the port of the host's endian order.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to setup the host-side endian order to the
+ * HBA consistent with the SLI-4 interface spec.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+static int
+lpfc_setup_endian_order(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *mboxq;
+ uint32_t rc = 0;
+ uint32_t endian_mb_data[2] = {HOST_ENDIAN_LOW_WORD0,
+ HOST_ENDIAN_HIGH_WORD1};
+
+ mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0492 Unable to allocate memory for issuing "
+ "SLI_CONFIG_SPECIAL mailbox command\n");
+ return -ENOMEM;
+ }
+
+ /*
+ * The SLI4_CONFIG_SPECIAL mailbox command requires the first two
+ * words to contain special data values and no other data.
+ */
+ memset(mboxq, 0, sizeof(LPFC_MBOXQ_t));
+ memcpy(&mboxq->u.mqe, &endian_mb_data, sizeof(endian_mb_data));
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ if (rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0493 SLI_CONFIG_SPECIAL mailbox failed with "
+ "status x%x\n",
+ rc);
+ rc = -EIO;
+ }
+
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return rc;
+}
+
+/**
+ * lpfc_sli4_queue_create - Create all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate all the SLI4 queues for the FCoE HBA
+ * operation. For each SLI4 queue type, the parameters such as queue entry
+ * count (queue depth) shall be taken from the module parameter. For now,
+ * we just use some constant number as place holder.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+static int
+lpfc_sli4_queue_create(struct lpfc_hba *phba)
+{
+ struct lpfc_queue *qdesc;
+ int fcp_eqidx, fcp_cqidx, fcp_wqidx;
+ int cfg_fcp_wq_count;
+ int cfg_fcp_eq_count;
+
+ /*
+ * Sanity check for confiugred queue parameters against the run-time
+ * device parameters
+ */
+
+ /* Sanity check on FCP fast-path WQ parameters */
+ cfg_fcp_wq_count = phba->cfg_fcp_wq_count;
+ if (cfg_fcp_wq_count >
+ (phba->sli4_hba.max_cfg_param.max_wq - LPFC_SP_WQN_DEF)) {
+ cfg_fcp_wq_count = phba->sli4_hba.max_cfg_param.max_wq -
+ LPFC_SP_WQN_DEF;
+ if (cfg_fcp_wq_count < LPFC_FP_WQN_MIN) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2581 Not enough WQs (%d) from "
+ "the pci function for supporting "
+ "FCP WQs (%d)\n",
+ phba->sli4_hba.max_cfg_param.max_wq,
+ phba->cfg_fcp_wq_count);
+ goto out_error;
+ }
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2582 Not enough WQs (%d) from the pci "
+ "function for supporting the requested "
+ "FCP WQs (%d), the actual FCP WQs can "
+ "be supported: %d\n",
+ phba->sli4_hba.max_cfg_param.max_wq,
+ phba->cfg_fcp_wq_count, cfg_fcp_wq_count);
+ }
+ /* The actual number of FCP work queues adopted */
+ phba->cfg_fcp_wq_count = cfg_fcp_wq_count;
+
+ /* Sanity check on FCP fast-path EQ parameters */
+ cfg_fcp_eq_count = phba->cfg_fcp_eq_count;
+ if (cfg_fcp_eq_count >
+ (phba->sli4_hba.max_cfg_param.max_eq - LPFC_SP_EQN_DEF)) {
+ cfg_fcp_eq_count = phba->sli4_hba.max_cfg_param.max_eq -
+ LPFC_SP_EQN_DEF;
+ if (cfg_fcp_eq_count < LPFC_FP_EQN_MIN) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2574 Not enough EQs (%d) from the "
+ "pci function for supporting FCP "
+ "EQs (%d)\n",
+ phba->sli4_hba.max_cfg_param.max_eq,
+ phba->cfg_fcp_eq_count);
+ goto out_error;
+ }
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2575 Not enough EQs (%d) from the pci "
+ "function for supporting the requested "
+ "FCP EQs (%d), the actual FCP EQs can "
+ "be supported: %d\n",
+ phba->sli4_hba.max_cfg_param.max_eq,
+ phba->cfg_fcp_eq_count, cfg_fcp_eq_count);
+ }
+ /* It does not make sense to have more EQs than WQs */
+ if (cfg_fcp_eq_count > phba->cfg_fcp_wq_count) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2593 The number of FCP EQs (%d) is more "
+ "than the number of FCP WQs (%d), take "
+ "the number of FCP EQs same as than of "
+ "WQs (%d)\n", cfg_fcp_eq_count,
+ phba->cfg_fcp_wq_count,
+ phba->cfg_fcp_wq_count);
+ cfg_fcp_eq_count = phba->cfg_fcp_wq_count;
+ }
+ /* The actual number of FCP event queues adopted */
+ phba->cfg_fcp_eq_count = cfg_fcp_eq_count;
+ /* The overall number of event queues used */
+ phba->sli4_hba.cfg_eqn = phba->cfg_fcp_eq_count + LPFC_SP_EQN_DEF;
+
+ /*
+ * Create Event Queues (EQs)
+ */
+
+ /* Get EQ depth from module parameter, fake the default for now */
+ phba->sli4_hba.eq_esize = LPFC_EQE_SIZE_4B;
+ phba->sli4_hba.eq_ecount = LPFC_EQE_DEF_COUNT;
+
+ /* Create slow path event queue */
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
+ phba->sli4_hba.eq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0496 Failed allocate slow-path EQ\n");
+ goto out_error;
+ }
+ phba->sli4_hba.sp_eq = qdesc;
+
+ /* Create fast-path FCP Event Queue(s) */
+ phba->sli4_hba.fp_eq = kzalloc((sizeof(struct lpfc_queue *) *
+ phba->cfg_fcp_eq_count), GFP_KERNEL);
+ if (!phba->sli4_hba.fp_eq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2576 Failed allocate memory for fast-path "
+ "EQ record array\n");
+ goto out_free_sp_eq;
+ }
+ for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
+ phba->sli4_hba.eq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0497 Failed allocate fast-path EQ\n");
+ goto out_free_fp_eq;
+ }
+ phba->sli4_hba.fp_eq[fcp_eqidx] = qdesc;
+ }
+
+ /*
+ * Create Complete Queues (CQs)
+ */
+
+ /* Get CQ depth from module parameter, fake the default for now */
+ phba->sli4_hba.cq_esize = LPFC_CQE_SIZE;
+ phba->sli4_hba.cq_ecount = LPFC_CQE_DEF_COUNT;
+
+ /* Create slow-path Mailbox Command Complete Queue */
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+ phba->sli4_hba.cq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0500 Failed allocate slow-path mailbox CQ\n");
+ goto out_free_fp_eq;
+ }
+ phba->sli4_hba.mbx_cq = qdesc;
+
+ /* Create slow-path ELS Complete Queue */
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+ phba->sli4_hba.cq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0501 Failed allocate slow-path ELS CQ\n");
+ goto out_free_mbx_cq;
+ }
+ phba->sli4_hba.els_cq = qdesc;
+
+ /* Create slow-path Unsolicited Receive Complete Queue */
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+ phba->sli4_hba.cq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0502 Failed allocate slow-path USOL RX CQ\n");
+ goto out_free_els_cq;
+ }
+ phba->sli4_hba.rxq_cq = qdesc;
+
+ /* Create fast-path FCP Completion Queue(s), one-to-one with EQs */
+ phba->sli4_hba.fcp_cq = kzalloc((sizeof(struct lpfc_queue *) *
+ phba->cfg_fcp_eq_count), GFP_KERNEL);
+ if (!phba->sli4_hba.fcp_cq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2577 Failed allocate memory for fast-path "
+ "CQ record array\n");
+ goto out_free_rxq_cq;
+ }
+ for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+ phba->sli4_hba.cq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0499 Failed allocate fast-path FCP "
+ "CQ (%d)\n", fcp_cqidx);
+ goto out_free_fcp_cq;
+ }
+ phba->sli4_hba.fcp_cq[fcp_cqidx] = qdesc;
+ }
+
+ /* Create Mailbox Command Queue */
+ phba->sli4_hba.mq_esize = LPFC_MQE_SIZE;
+ phba->sli4_hba.mq_ecount = LPFC_MQE_DEF_COUNT;
+
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.mq_esize,
+ phba->sli4_hba.mq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0505 Failed allocate slow-path MQ\n");
+ goto out_free_fcp_cq;
+ }
+ phba->sli4_hba.mbx_wq = qdesc;
+
+ /*
+ * Create all the Work Queues (WQs)
+ */
+ phba->sli4_hba.wq_esize = LPFC_WQE_SIZE;
+ phba->sli4_hba.wq_ecount = LPFC_WQE_DEF_COUNT;
+
+ /* Create slow-path ELS Work Queue */
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.wq_esize,
+ phba->sli4_hba.wq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0504 Failed allocate slow-path ELS WQ\n");
+ goto out_free_mbx_wq;
+ }
+ phba->sli4_hba.els_wq = qdesc;
+
+ /* Create fast-path FCP Work Queue(s) */
+ phba->sli4_hba.fcp_wq = kzalloc((sizeof(struct lpfc_queue *) *
+ phba->cfg_fcp_wq_count), GFP_KERNEL);
+ if (!phba->sli4_hba.fcp_wq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2578 Failed allocate memory for fast-path "
+ "WQ record array\n");
+ goto out_free_els_wq;
+ }
+ for (fcp_wqidx = 0; fcp_wqidx < phba->cfg_fcp_wq_count; fcp_wqidx++) {
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.wq_esize,
+ phba->sli4_hba.wq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0503 Failed allocate fast-path FCP "
+ "WQ (%d)\n", fcp_wqidx);
+ goto out_free_fcp_wq;
+ }
+ phba->sli4_hba.fcp_wq[fcp_wqidx] = qdesc;
+ }
+
+ /*
+ * Create Receive Queue (RQ)
+ */
+ phba->sli4_hba.rq_esize = LPFC_RQE_SIZE;
+ phba->sli4_hba.rq_ecount = LPFC_RQE_DEF_COUNT;
+
+ /* Create Receive Queue for header */
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.rq_esize,
+ phba->sli4_hba.rq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0506 Failed allocate receive HRQ\n");
+ goto out_free_fcp_wq;
+ }
+ phba->sli4_hba.hdr_rq = qdesc;
+
+ /* Create Receive Queue for data */
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.rq_esize,
+ phba->sli4_hba.rq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0507 Failed allocate receive DRQ\n");
+ goto out_free_hdr_rq;
+ }
+ phba->sli4_hba.dat_rq = qdesc;
+
+ return 0;
+
+out_free_hdr_rq:
+ lpfc_sli4_queue_free(phba->sli4_hba.hdr_rq);
+ phba->sli4_hba.hdr_rq = NULL;
+out_free_fcp_wq:
+ for (--fcp_wqidx; fcp_wqidx >= 0; fcp_wqidx--) {
+ lpfc_sli4_queue_free(phba->sli4_hba.fcp_wq[fcp_wqidx]);
+ phba->sli4_hba.fcp_wq[fcp_wqidx] = NULL;
+ }
+ kfree(phba->sli4_hba.fcp_wq);
+out_free_els_wq:
+ lpfc_sli4_queue_free(phba->sli4_hba.els_wq);
+ phba->sli4_hba.els_wq = NULL;
+out_free_mbx_wq:
+ lpfc_sli4_queue_free(phba->sli4_hba.mbx_wq);
+ phba->sli4_hba.mbx_wq = NULL;
+out_free_fcp_cq:
+ for (--fcp_cqidx; fcp_cqidx >= 0; fcp_cqidx--) {
+ lpfc_sli4_queue_free(phba->sli4_hba.fcp_cq[fcp_cqidx]);
+ phba->sli4_hba.fcp_cq[fcp_cqidx] = NULL;
+ }
+ kfree(phba->sli4_hba.fcp_cq);
+out_free_rxq_cq:
+ lpfc_sli4_queue_free(phba->sli4_hba.rxq_cq);
+ phba->sli4_hba.rxq_cq = NULL;
+out_free_els_cq:
+ lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
+ phba->sli4_hba.els_cq = NULL;
+out_free_mbx_cq:
+ lpfc_sli4_queue_free(phba->sli4_hba.mbx_cq);
+ phba->sli4_hba.mbx_cq = NULL;
+out_free_fp_eq:
+ for (--fcp_eqidx; fcp_eqidx >= 0; fcp_eqidx--) {
+ lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_eqidx]);
+ phba->sli4_hba.fp_eq[fcp_eqidx] = NULL;
+ }
+ kfree(phba->sli4_hba.fp_eq);
+out_free_sp_eq:
+ lpfc_sli4_queue_free(phba->sli4_hba.sp_eq);
+ phba->sli4_hba.sp_eq = NULL;
+out_error:
+ return -ENOMEM;
+}
+
+/**
+ * lpfc_sli4_queue_destroy - Destroy all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to release all the SLI4 queues with the FCoE HBA
+ * operation.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+static void
+lpfc_sli4_queue_destroy(struct lpfc_hba *phba)
+{
+ int fcp_qidx;
+
+ /* Release mailbox command work queue */
+ lpfc_sli4_queue_free(phba->sli4_hba.mbx_wq);
+ phba->sli4_hba.mbx_wq = NULL;
+
+ /* Release ELS work queue */
+ lpfc_sli4_queue_free(phba->sli4_hba.els_wq);
+ phba->sli4_hba.els_wq = NULL;
+
+ /* Release FCP work queue */
+ for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++)
+ lpfc_sli4_queue_free(phba->sli4_hba.fcp_wq[fcp_qidx]);
+ kfree(phba->sli4_hba.fcp_wq);
+ phba->sli4_hba.fcp_wq = NULL;
+
+ /* Release unsolicited receive queue */
+ lpfc_sli4_queue_free(phba->sli4_hba.hdr_rq);
+ phba->sli4_hba.hdr_rq = NULL;
+ lpfc_sli4_queue_free(phba->sli4_hba.dat_rq);
+ phba->sli4_hba.dat_rq = NULL;
+
+ /* Release unsolicited receive complete queue */
+ lpfc_sli4_queue_free(phba->sli4_hba.rxq_cq);
+ phba->sli4_hba.rxq_cq = NULL;
+
+ /* Release ELS complete queue */
+ lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
+ phba->sli4_hba.els_cq = NULL;
+
+ /* Release mailbox command complete queue */
+ lpfc_sli4_queue_free(phba->sli4_hba.mbx_cq);
+ phba->sli4_hba.mbx_cq = NULL;
+
+ /* Release FCP response complete queue */
+ for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+ lpfc_sli4_queue_free(phba->sli4_hba.fcp_cq[fcp_qidx]);
+ kfree(phba->sli4_hba.fcp_cq);
+ phba->sli4_hba.fcp_cq = NULL;
+
+ /* Release fast-path event queue */
+ for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+ lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_qidx]);
+ kfree(phba->sli4_hba.fp_eq);
+ phba->sli4_hba.fp_eq = NULL;
+
+ /* Release slow-path event queue */
+ lpfc_sli4_queue_free(phba->sli4_hba.sp_eq);
+ phba->sli4_hba.sp_eq = NULL;
+
+ return;
+}
+
+/**
+ * lpfc_sli4_queue_setup - Set up all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up all the SLI4 queues for the FCoE HBA
+ * operation.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_sli4_queue_setup(struct lpfc_hba *phba)
+{
+ int rc = -ENOMEM;
+ int fcp_eqidx, fcp_cqidx, fcp_wqidx;
+ int fcp_cq_index = 0;
+
+ /*
+ * Set up Event Queues (EQs)
+ */
+
+ /* Set up slow-path event queue */
+ if (!phba->sli4_hba.sp_eq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0520 Slow-path EQ not allocated\n");
+ goto out_error;
+ }
+ rc = lpfc_eq_create(phba, phba->sli4_hba.sp_eq,
+ LPFC_SP_DEF_IMAX);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0521 Failed setup of slow-path EQ: "
+ "rc = 0x%x\n", rc);
+ goto out_error;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2583 Slow-path EQ setup: queue-id=%d\n",
+ phba->sli4_hba.sp_eq->queue_id);
+
+ /* Set up fast-path event queue */
+ for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
+ if (!phba->sli4_hba.fp_eq[fcp_eqidx]) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0522 Fast-path EQ (%d) not "
+ "allocated\n", fcp_eqidx);
+ goto out_destroy_fp_eq;
+ }
+ rc = lpfc_eq_create(phba, phba->sli4_hba.fp_eq[fcp_eqidx],
+ phba->cfg_fcp_imax);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0523 Failed setup of fast-path EQ "
+ "(%d), rc = 0x%x\n", fcp_eqidx, rc);
+ goto out_destroy_fp_eq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2584 Fast-path EQ setup: "
+ "queue[%d]-id=%d\n", fcp_eqidx,
+ phba->sli4_hba.fp_eq[fcp_eqidx]->queue_id);
+ }
+
+ /*
+ * Set up Complete Queues (CQs)
+ */
+
+ /* Set up slow-path MBOX Complete Queue as the first CQ */
+ if (!phba->sli4_hba.mbx_cq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0528 Mailbox CQ not allocated\n");
+ goto out_destroy_fp_eq;
+ }
+ rc = lpfc_cq_create(phba, phba->sli4_hba.mbx_cq, phba->sli4_hba.sp_eq,
+ LPFC_MCQ, LPFC_MBOX);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0529 Failed setup of slow-path mailbox CQ: "
+ "rc = 0x%x\n", rc);
+ goto out_destroy_fp_eq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2585 MBX CQ setup: cq-id=%d, parent eq-id=%d\n",
+ phba->sli4_hba.mbx_cq->queue_id,
+ phba->sli4_hba.sp_eq->queue_id);
+
+ /* Set up slow-path ELS Complete Queue */
+ if (!phba->sli4_hba.els_cq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0530 ELS CQ not allocated\n");
+ goto out_destroy_mbx_cq;
+ }
+ rc = lpfc_cq_create(phba, phba->sli4_hba.els_cq, phba->sli4_hba.sp_eq,
+ LPFC_WCQ, LPFC_ELS);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0531 Failed setup of slow-path ELS CQ: "
+ "rc = 0x%x\n", rc);
+ goto out_destroy_mbx_cq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2586 ELS CQ setup: cq-id=%d, parent eq-id=%d\n",
+ phba->sli4_hba.els_cq->queue_id,
+ phba->sli4_hba.sp_eq->queue_id);
+
+ /* Set up slow-path Unsolicited Receive Complete Queue */
+ if (!phba->sli4_hba.rxq_cq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0532 USOL RX CQ not allocated\n");
+ goto out_destroy_els_cq;
+ }
+ rc = lpfc_cq_create(phba, phba->sli4_hba.rxq_cq, phba->sli4_hba.sp_eq,
+ LPFC_RCQ, LPFC_USOL);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0533 Failed setup of slow-path USOL RX CQ: "
+ "rc = 0x%x\n", rc);
+ goto out_destroy_els_cq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2587 USL CQ setup: cq-id=%d, parent eq-id=%d\n",
+ phba->sli4_hba.rxq_cq->queue_id,
+ phba->sli4_hba.sp_eq->queue_id);
+
+ /* Set up fast-path FCP Response Complete Queue */
+ for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
+ if (!phba->sli4_hba.fcp_cq[fcp_cqidx]) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0526 Fast-path FCP CQ (%d) not "
+ "allocated\n", fcp_cqidx);
+ goto out_destroy_fcp_cq;
+ }
+ rc = lpfc_cq_create(phba, phba->sli4_hba.fcp_cq[fcp_cqidx],
+ phba->sli4_hba.fp_eq[fcp_cqidx],
+ LPFC_WCQ, LPFC_FCP);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0527 Failed setup of fast-path FCP "
+ "CQ (%d), rc = 0x%x\n", fcp_cqidx, rc);
+ goto out_destroy_fcp_cq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2588 FCP CQ setup: cq[%d]-id=%d, "
+ "parent eq[%d]-id=%d\n",
+ fcp_cqidx,
+ phba->sli4_hba.fcp_cq[fcp_cqidx]->queue_id,
+ fcp_cqidx,
+ phba->sli4_hba.fp_eq[fcp_cqidx]->queue_id);
+ }
+
+ /*
+ * Set up all the Work Queues (WQs)
+ */
+
+ /* Set up Mailbox Command Queue */
+ if (!phba->sli4_hba.mbx_wq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0538 Slow-path MQ not allocated\n");
+ goto out_destroy_fcp_cq;
+ }
+ rc = lpfc_mq_create(phba, phba->sli4_hba.mbx_wq,
+ phba->sli4_hba.mbx_cq, LPFC_MBOX);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0539 Failed setup of slow-path MQ: "
+ "rc = 0x%x\n", rc);
+ goto out_destroy_fcp_cq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2589 MBX MQ setup: wq-id=%d, parent cq-id=%d\n",
+ phba->sli4_hba.mbx_wq->queue_id,
+ phba->sli4_hba.mbx_cq->queue_id);
+
+ /* Set up slow-path ELS Work Queue */
+ if (!phba->sli4_hba.els_wq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0536 Slow-path ELS WQ not allocated\n");
+ goto out_destroy_mbx_wq;
+ }
+ rc = lpfc_wq_create(phba, phba->sli4_hba.els_wq,
+ phba->sli4_hba.els_cq, LPFC_ELS);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0537 Failed setup of slow-path ELS WQ: "
+ "rc = 0x%x\n", rc);
+ goto out_destroy_mbx_wq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2590 ELS WQ setup: wq-id=%d, parent cq-id=%d\n",
+ phba->sli4_hba.els_wq->queue_id,
+ phba->sli4_hba.els_cq->queue_id);
+
+ /* Set up fast-path FCP Work Queue */
+ for (fcp_wqidx = 0; fcp_wqidx < phba->cfg_fcp_wq_count; fcp_wqidx++) {
+ if (!phba->sli4_hba.fcp_wq[fcp_wqidx]) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0534 Fast-path FCP WQ (%d) not "
+ "allocated\n", fcp_wqidx);
+ goto out_destroy_fcp_wq;
+ }
+ rc = lpfc_wq_create(phba, phba->sli4_hba.fcp_wq[fcp_wqidx],
+ phba->sli4_hba.fcp_cq[fcp_cq_index],
+ LPFC_FCP);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0535 Failed setup of fast-path FCP "
+ "WQ (%d), rc = 0x%x\n", fcp_wqidx, rc);
+ goto out_destroy_fcp_wq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2591 FCP WQ setup: wq[%d]-id=%d, "
+ "parent cq[%d]-id=%d\n",
+ fcp_wqidx,
+ phba->sli4_hba.fcp_wq[fcp_wqidx]->queue_id,
+ fcp_cq_index,
+ phba->sli4_hba.fcp_cq[fcp_cq_index]->queue_id);
+ /* Round robin FCP Work Queue's Completion Queue assignment */
+ fcp_cq_index = ((fcp_cq_index + 1) % phba->cfg_fcp_eq_count);
+ }
+
+ /*
+ * Create Receive Queue (RQ)
+ */
+ if (!phba->sli4_hba.hdr_rq || !phba->sli4_hba.dat_rq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0540 Receive Queue not allocated\n");
+ goto out_destroy_fcp_wq;
+ }
+ rc = lpfc_rq_create(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq,
+ phba->sli4_hba.rxq_cq, LPFC_USOL);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0541 Failed setup of Receive Queue: "
+ "rc = 0x%x\n", rc);
+ goto out_destroy_fcp_wq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2592 USL RQ setup: hdr-rq-id=%d, dat-rq-id=%d "
+ "parent cq-id=%d\n",
+ phba->sli4_hba.hdr_rq->queue_id,
+ phba->sli4_hba.dat_rq->queue_id,
+ phba->sli4_hba.rxq_cq->queue_id);
+ return 0;
+
+out_destroy_fcp_wq:
+ for (--fcp_wqidx; fcp_wqidx >= 0; fcp_wqidx--)
+ lpfc_wq_destroy(phba, phba->sli4_hba.fcp_wq[fcp_wqidx]);
+ lpfc_wq_destroy(phba, phba->sli4_hba.els_wq);
+out_destroy_mbx_wq:
+ lpfc_mq_destroy(phba, phba->sli4_hba.mbx_wq);
+out_destroy_fcp_cq:
+ for (--fcp_cqidx; fcp_cqidx >= 0; fcp_cqidx--)
+ lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_cqidx]);
+ lpfc_cq_destroy(phba, phba->sli4_hba.rxq_cq);
+out_destroy_els_cq:
+ lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
+out_destroy_mbx_cq:
+ lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
+out_destroy_fp_eq:
+ for (--fcp_eqidx; fcp_eqidx >= 0; fcp_eqidx--)
+ lpfc_eq_destroy(phba, phba->sli4_hba.fp_eq[fcp_eqidx]);
+ lpfc_eq_destroy(phba, phba->sli4_hba.sp_eq);
+out_error:
+ return rc;
+}
+
+/**
+ * lpfc_sli4_queue_unset - Unset all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset all the SLI4 queues with the FCoE HBA
+ * operation.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+void
+lpfc_sli4_queue_unset(struct lpfc_hba *phba)
+{
+ int fcp_qidx;
+
+ /* Unset mailbox command work queue */
+ lpfc_mq_destroy(phba, phba->sli4_hba.mbx_wq);
+ /* Unset ELS work queue */
+ lpfc_wq_destroy(phba, phba->sli4_hba.els_wq);
+ /* Unset unsolicited receive queue */
+ lpfc_rq_destroy(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq);
+ /* Unset FCP work queue */
+ for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++)
+ lpfc_wq_destroy(phba, phba->sli4_hba.fcp_wq[fcp_qidx]);
+ /* Unset mailbox command complete queue */
+ lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
+ /* Unset ELS complete queue */
+ lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
+ /* Unset unsolicited receive complete queue */
+ lpfc_cq_destroy(phba, phba->sli4_hba.rxq_cq);
+ /* Unset FCP response complete queue */
+ for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+ lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_qidx]);
+ /* Unset fast-path event queue */
+ for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+ lpfc_eq_destroy(phba, phba->sli4_hba.fp_eq[fcp_qidx]);
+ /* Unset slow-path event queue */
+ lpfc_eq_destroy(phba, phba->sli4_hba.sp_eq);
+}
+
+/**
+ * lpfc_sli4_cq_event_pool_create - Create completion-queue event free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate and set up a pool of completion queue
+ * events. The body of the completion queue event is a completion queue entry
+ * CQE. For now, this pool is used for the interrupt service routine to queue
+ * the following HBA completion queue events for the worker thread to process:
+ * - Mailbox asynchronous events
+ * - Receive queue completion unsolicited events
+ * Later, this can be used for all the slow-path events.
+ *
+ * Return codes
+ * 0 - sucessful
+ * -ENOMEM - No availble memory
+ **/
+static int
+lpfc_sli4_cq_event_pool_create(struct lpfc_hba *phba)
+{
+ struct lpfc_cq_event *cq_event;
+ int i;
+
+ for (i = 0; i < (4 * phba->sli4_hba.cq_ecount); i++) {
+ cq_event = kmalloc(sizeof(struct lpfc_cq_event), GFP_KERNEL);
+ if (!cq_event)
+ goto out_pool_create_fail;
+ list_add_tail(&cq_event->list,
+ &phba->sli4_hba.sp_cqe_event_pool);
+ }
+ return 0;
+
+out_pool_create_fail:
+ lpfc_sli4_cq_event_pool_destroy(phba);
+ return -ENOMEM;
+}
+
+/**
+ * lpfc_sli4_cq_event_pool_destroy - Free completion-queue event free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the pool of completion queue events at
+ * driver unload time. Note that, it is the responsibility of the driver
+ * cleanup routine to free all the outstanding completion-queue events
+ * allocated from this pool back into the pool before invoking this routine
+ * to destroy the pool.
+ **/
+static void
+lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *phba)
+{
+ struct lpfc_cq_event *cq_event, *next_cq_event;
+
+ list_for_each_entry_safe(cq_event, next_cq_event,
+ &phba->sli4_hba.sp_cqe_event_pool, list) {
+ list_del(&cq_event->list);
+ kfree(cq_event);
+ }
+}
+
+/**
+ * __lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is the lock free version of the API invoked to allocate a
+ * completion-queue event from the free pool.
+ *
+ * Return: Pointer to the newly allocated completion-queue event if successful
+ * NULL otherwise.
+ **/
+struct lpfc_cq_event *
+__lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
+{
+ struct lpfc_cq_event *cq_event = NULL;
+
+ list_remove_head(&phba->sli4_hba.sp_cqe_event_pool, cq_event,
+ struct lpfc_cq_event, list);
+ return cq_event;
+}
+
+/**
+ * lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is the lock version of the API invoked to allocate a
+ * completion-queue event from the free pool.
+ *
+ * Return: Pointer to the newly allocated completion-queue event if successful
+ * NULL otherwise.
+ **/
+struct lpfc_cq_event *
+lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
+{
+ struct lpfc_cq_event *cq_event;
+ unsigned long iflags;
+
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ cq_event = __lpfc_sli4_cq_event_alloc(phba);
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ return cq_event;
+}
+
+/**
+ * __lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
+ * @phba: pointer to lpfc hba data structure.
+ * @cq_event: pointer to the completion queue event to be freed.
+ *
+ * This routine is the lock free version of the API invoked to release a
+ * completion-queue event back into the free pool.
+ **/
+void
+__lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
+ struct lpfc_cq_event *cq_event)
+{
+ list_add_tail(&cq_event->list, &phba->sli4_hba.sp_cqe_event_pool);
+}
+
+/**
+ * lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
+ * @phba: pointer to lpfc hba data structure.
+ * @cq_event: pointer to the completion queue event to be freed.
+ *
+ * This routine is the lock version of the API invoked to release a
+ * completion-queue event back into the free pool.
+ **/
+void
+lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
+ struct lpfc_cq_event *cq_event)
+{
+ unsigned long iflags;
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ __lpfc_sli4_cq_event_release(phba, cq_event);
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+}
+
+/**
+ * lpfc_sli4_cq_event_release_all - Release all cq events to the free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is to free all the pending completion-queue events to the
+ * back into the free pool for device reset.
+ **/
+static void
+lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba)
+{
+ LIST_HEAD(cqelist);
+ struct lpfc_cq_event *cqe;
+ unsigned long iflags;
+
+ /* Retrieve all the pending WCQEs from pending WCQE lists */
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ /* Pending FCP XRI abort events */
+ list_splice_init(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue,
+ &cqelist);
+ /* Pending ELS XRI abort events */
+ list_splice_init(&phba->sli4_hba.sp_els_xri_aborted_work_queue,
+ &cqelist);
+ /* Pending asynnc events */
+ list_splice_init(&phba->sli4_hba.sp_asynce_work_queue,
+ &cqelist);
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+ while (!list_empty(&cqelist)) {
+ list_remove_head(&cqelist, cqe, struct lpfc_cq_event, list);
+ lpfc_sli4_cq_event_release(phba, cqe);
+ }
+}
+
+/**
+ * lpfc_pci_function_reset - Reset pci function.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to request a PCI function reset. It will destroys
+ * all resources assigned to the PCI function which originates this request.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_pci_function_reset(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *mboxq;
+ uint32_t rc = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0494 Unable to allocate memory for issuing "
+ "SLI_FUNCTION_RESET mailbox command\n");
+ return -ENOMEM;
+ }
+
+ /* Set up PCI function reset SLI4_CONFIG mailbox-ioctl command */
+ lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_FUNCTION_RESET, 0,
+ LPFC_SLI4_MBX_EMBED);
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0495 SLI_FUNCTION_RESET mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ rc = -ENXIO;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_sli4_send_nop_mbox_cmds - Send sli-4 nop mailbox commands
+ * @phba: pointer to lpfc hba data structure.
+ * @cnt: number of nop mailbox commands to send.
+ *
+ * This routine is invoked to send a number @cnt of NOP mailbox command and
+ * wait for each command to complete.
+ *
+ * Return: the number of NOP mailbox command completed.
+ **/
+static int
+lpfc_sli4_send_nop_mbox_cmds(struct lpfc_hba *phba, uint32_t cnt)
+{
+ LPFC_MBOXQ_t *mboxq;
+ int length, cmdsent;
+ uint32_t mbox_tmo;
+ uint32_t rc = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ if (cnt == 0) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2518 Requested to send 0 NOP mailbox cmd\n");
+ return cnt;
+ }
+
+ mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2519 Unable to allocate memory for issuing "
+ "NOP mailbox command\n");
+ return 0;
+ }
+
+ /* Set up NOP SLI4_CONFIG mailbox-ioctl command */
+ length = (sizeof(struct lpfc_mbx_nop) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_NOP, length, LPFC_SLI4_MBX_EMBED);
+
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ for (cmdsent = 0; cmdsent < cnt; cmdsent++) {
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ else
+ rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+ if (rc == MBX_TIMEOUT)
+ break;
+ /* Check return status */
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+ &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2520 NOP mailbox command failed "
+ "status x%x add_status x%x mbx "
+ "status x%x\n", shdr_status,
+ shdr_add_status, rc);
+ break;
+ }
+ }
+
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mboxq, phba->mbox_mem_pool);
+
+ return cmdsent;
+}
+
+/**
+ * lpfc_sli4_fcfi_unreg - Unregister fcfi to device
+ * @phba: pointer to lpfc hba data structure.
+ * @fcfi: fcf index.
+ *
+ * This routine is invoked to unregister a FCFI from device.
+ **/
+void
+lpfc_sli4_fcfi_unreg(struct lpfc_hba *phba, uint16_t fcfi)
+{
+ LPFC_MBOXQ_t *mbox;
+ uint32_t mbox_tmo;
+ int rc;
+ unsigned long flags;
+
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+
+ if (!mbox)
+ return;
+
+ lpfc_unreg_fcfi(mbox, fcfi);
+
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ else {
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+ }
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ if (rc != MBX_SUCCESS)
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2517 Unregister FCFI command failed "
+ "status %d, mbxStatus x%x\n", rc,
+ bf_get(lpfc_mqe_status, &mbox->u.mqe));
+ else {
+ spin_lock_irqsave(&phba->hbalock, flags);
+ /* Mark the FCFI is no longer registered */
+ phba->fcf.fcf_flag &=
+ ~(FCF_AVAILABLE | FCF_REGISTERED | FCF_DISCOVERED);
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ }
+}
+
+/**
+ * lpfc_sli4_pci_mem_setup - Setup SLI4 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the PCI device memory space for device
+ * with SLI-4 interface spec.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
+{
+ struct pci_dev *pdev;
+ unsigned long bar0map_len, bar1map_len, bar2map_len;
+ int error = -ENODEV;
+
+ /* Obtain PCI device reference */
+ if (!phba->pcidev)
+ return error;
+ else
+ pdev = phba->pcidev;
+
+ /* Set the device DMA mask size */
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+ return error;
+
+ /* Get the bus address of SLI4 device Bar0, Bar1, and Bar2 and the
+ * number of bytes required by each mapping. They are actually
+ * mapping to the PCI BAR regions 1, 2, and 4 by the SLI4 device.
+ */
+ phba->pci_bar0_map = pci_resource_start(pdev, LPFC_SLI4_BAR0);
+ bar0map_len = pci_resource_len(pdev, LPFC_SLI4_BAR0);
+
+ phba->pci_bar1_map = pci_resource_start(pdev, LPFC_SLI4_BAR1);
+ bar1map_len = pci_resource_len(pdev, LPFC_SLI4_BAR1);
+
+ phba->pci_bar2_map = pci_resource_start(pdev, LPFC_SLI4_BAR2);
+ bar2map_len = pci_resource_len(pdev, LPFC_SLI4_BAR2);
+
+ /* Map SLI4 PCI Config Space Register base to a kernel virtual addr */
+ phba->sli4_hba.conf_regs_memmap_p =
+ ioremap(phba->pci_bar0_map, bar0map_len);
+ if (!phba->sli4_hba.conf_regs_memmap_p) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "ioremap failed for SLI4 PCI config registers.\n");
+ goto out;
+ }
+
+ /* Map SLI4 HBA Control Register base to a kernel virtual address. */
+ phba->sli4_hba.ctrl_regs_memmap_p =
+ ioremap(phba->pci_bar1_map, bar1map_len);
+ if (!phba->sli4_hba.ctrl_regs_memmap_p) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "ioremap failed for SLI4 HBA control registers.\n");
+ goto out_iounmap_conf;
+ }
+
+ /* Map SLI4 HBA Doorbell Register base to a kernel virtual address. */
+ phba->sli4_hba.drbl_regs_memmap_p =
+ ioremap(phba->pci_bar2_map, bar2map_len);
+ if (!phba->sli4_hba.drbl_regs_memmap_p) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "ioremap failed for SLI4 HBA doorbell registers.\n");
+ goto out_iounmap_ctrl;
+ }
+
+ /* Set up BAR0 PCI config space register memory map */
+ lpfc_sli4_bar0_register_memmap(phba);
+
+ /* Set up BAR1 register memory map */
+ lpfc_sli4_bar1_register_memmap(phba);
+
+ /* Set up BAR2 register memory map */
+ error = lpfc_sli4_bar2_register_memmap(phba, LPFC_VF0);
+ if (error)
+ goto out_iounmap_all;
+
+ return 0;
+
+out_iounmap_all:
+ iounmap(phba->sli4_hba.drbl_regs_memmap_p);
+out_iounmap_ctrl:
+ iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
+out_iounmap_conf:
+ iounmap(phba->sli4_hba.conf_regs_memmap_p);
+out:
+ return error;
+}
+
+/**
+ * lpfc_sli4_pci_mem_unset - Unset SLI4 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the PCI device memory space for device
+ * with SLI-4 interface spec.
+ **/
+static void
+lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
+{
+ struct pci_dev *pdev;
+
+ /* Obtain PCI device reference */
+ if (!phba->pcidev)
+ return;
+ else
+ pdev = phba->pcidev;
+
+ /* Free coherent DMA memory allocated */
+
+ /* Unmap I/O memory space */
+ iounmap(phba->sli4_hba.drbl_regs_memmap_p);
+ iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
+ iounmap(phba->sli4_hba.conf_regs_memmap_p);
+
+ return;
+}
+
+/**
+ * lpfc_sli_enable_msix - Enable MSI-X interrupt mode on SLI-3 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the MSI-X interrupt vectors to device
+ * with SLI-3 interface specs. The kernel function pci_enable_msix() is
+ * called to enable the MSI-X vectors. Note that pci_enable_msix(), once
+ * invoked, enables either all or nothing, depending on the current
+ * availability of PCI vector resources. The device driver is responsible
+ * for calling the individual request_irq() to register each MSI-X vector
+ * with a interrupt handler, which is done in this function. Note that
* later when device is unloading, the driver should always call free_irq()
* on all MSI-X vectors it has done request_irq() on before calling
* pci_disable_msix(). Failure to do so results in a BUG_ON() and a device
@@ -2333,7 +6029,7 @@ void lpfc_host_attrib_init(struct Scsi_Host *shost)
* other values - error
**/
static int
-lpfc_enable_msix(struct lpfc_hba *phba)
+lpfc_sli_enable_msix(struct lpfc_hba *phba)
{
int rc, i;
LPFC_MBOXQ_t *pmb;
@@ -2349,20 +6045,21 @@ lpfc_enable_msix(struct lpfc_hba *phba)
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0420 PCI enable MSI-X failed (%d)\n", rc);
goto msi_fail_out;
- } else
- for (i = 0; i < LPFC_MSIX_VECTORS; i++)
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0477 MSI-X entry[%d]: vector=x%x "
- "message=%d\n", i,
- phba->msix_entries[i].vector,
- phba->msix_entries[i].entry);
+ }
+ for (i = 0; i < LPFC_MSIX_VECTORS; i++)
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0477 MSI-X entry[%d]: vector=x%x "
+ "message=%d\n", i,
+ phba->msix_entries[i].vector,
+ phba->msix_entries[i].entry);
/*
* Assign MSI-X vectors to interrupt handlers
*/
/* vector-0 is associated to slow-path handler */
- rc = request_irq(phba->msix_entries[0].vector, &lpfc_sp_intr_handler,
- IRQF_SHARED, LPFC_SP_DRIVER_HANDLER_NAME, phba);
+ rc = request_irq(phba->msix_entries[0].vector,
+ &lpfc_sli_sp_intr_handler, IRQF_SHARED,
+ LPFC_SP_DRIVER_HANDLER_NAME, phba);
if (rc) {
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
"0421 MSI-X slow-path request_irq failed "
@@ -2371,8 +6068,9 @@ lpfc_enable_msix(struct lpfc_hba *phba)
}
/* vector-1 is associated to fast-path handler */
- rc = request_irq(phba->msix_entries[1].vector, &lpfc_fp_intr_handler,
- IRQF_SHARED, LPFC_FP_DRIVER_HANDLER_NAME, phba);
+ rc = request_irq(phba->msix_entries[1].vector,
+ &lpfc_sli_fp_intr_handler, IRQF_SHARED,
+ LPFC_FP_DRIVER_HANDLER_NAME, phba);
if (rc) {
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
@@ -2401,7 +6099,7 @@ lpfc_enable_msix(struct lpfc_hba *phba)
lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
"0351 Config MSI mailbox command failed, "
"mbxCmd x%x, mbxStatus x%x\n",
- pmb->mb.mbxCommand, pmb->mb.mbxStatus);
+ pmb->u.mb.mbxCommand, pmb->u.mb.mbxStatus);
goto mbx_fail_out;
}
@@ -2428,14 +6126,14 @@ msi_fail_out:
}
/**
- * lpfc_disable_msix - Disable MSI-X interrupt mode
+ * lpfc_sli_disable_msix - Disable MSI-X interrupt mode on SLI-3 device.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to release the MSI-X vectors and then disable the
- * MSI-X interrupt mode.
+ * MSI-X interrupt mode to device with SLI-3 interface spec.
**/
static void
-lpfc_disable_msix(struct lpfc_hba *phba)
+lpfc_sli_disable_msix(struct lpfc_hba *phba)
{
int i;
@@ -2444,23 +6142,26 @@ lpfc_disable_msix(struct lpfc_hba *phba)
free_irq(phba->msix_entries[i].vector, phba);
/* Disable MSI-X */
pci_disable_msix(phba->pcidev);
+
+ return;
}
/**
- * lpfc_enable_msi - Enable MSI interrupt mode
+ * lpfc_sli_enable_msi - Enable MSI interrupt mode on SLI-3 device.
* @phba: pointer to lpfc hba data structure.
*
- * This routine is invoked to enable the MSI interrupt mode. The kernel
- * function pci_enable_msi() is called to enable the MSI vector. The
- * device driver is responsible for calling the request_irq() to register
- * MSI vector with a interrupt the handler, which is done in this function.
+ * This routine is invoked to enable the MSI interrupt mode to device with
+ * SLI-3 interface spec. The kernel function pci_enable_msi() is called to
+ * enable the MSI vector. The device driver is responsible for calling the
+ * request_irq() to register MSI vector with a interrupt the handler, which
+ * is done in this function.
*
* Return codes
* 0 - sucessful
* other values - error
*/
static int
-lpfc_enable_msi(struct lpfc_hba *phba)
+lpfc_sli_enable_msi(struct lpfc_hba *phba)
{
int rc;
@@ -2474,7 +6175,7 @@ lpfc_enable_msi(struct lpfc_hba *phba)
return rc;
}
- rc = request_irq(phba->pcidev->irq, lpfc_intr_handler,
+ rc = request_irq(phba->pcidev->irq, lpfc_sli_intr_handler,
IRQF_SHARED, LPFC_DRIVER_NAME, phba);
if (rc) {
pci_disable_msi(phba->pcidev);
@@ -2485,17 +6186,17 @@ lpfc_enable_msi(struct lpfc_hba *phba)
}
/**
- * lpfc_disable_msi - Disable MSI interrupt mode
+ * lpfc_sli_disable_msi - Disable MSI interrupt mode to SLI-3 device.
* @phba: pointer to lpfc hba data structure.
*
- * This routine is invoked to disable the MSI interrupt mode. The driver
- * calls free_irq() on MSI vector it has done request_irq() on before
- * calling pci_disable_msi(). Failure to do so results in a BUG_ON() and
- * a device will be left with MSI enabled and leaks its vector.
+ * This routine is invoked to disable the MSI interrupt mode to device with
+ * SLI-3 interface spec. The driver calls free_irq() on MSI vector it has
+ * done request_irq() on before calling pci_disable_msi(). Failure to do so
+ * results in a BUG_ON() and a device will be left with MSI enabled and leaks
+ * its vector.
*/
-
static void
-lpfc_disable_msi(struct lpfc_hba *phba)
+lpfc_sli_disable_msi(struct lpfc_hba *phba)
{
free_irq(phba->pcidev->irq, phba);
pci_disable_msi(phba->pcidev);
@@ -2503,80 +6204,298 @@ lpfc_disable_msi(struct lpfc_hba *phba)
}
/**
- * lpfc_log_intr_mode - Log the active interrupt mode
+ * lpfc_sli_enable_intr - Enable device interrupt to SLI-3 device.
* @phba: pointer to lpfc hba data structure.
- * @intr_mode: active interrupt mode adopted.
*
- * This routine it invoked to log the currently used active interrupt mode
- * to the device.
- */
+ * This routine is invoked to enable device interrupt and associate driver's
+ * interrupt handler(s) to interrupt vector(s) to device with SLI-3 interface
+ * spec. Depends on the interrupt mode configured to the driver, the driver
+ * will try to fallback from the configured interrupt mode to an interrupt
+ * mode which is supported by the platform, kernel, and device in the order
+ * of:
+ * MSI-X -> MSI -> IRQ.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static uint32_t
+lpfc_sli_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
+{
+ uint32_t intr_mode = LPFC_INTR_ERROR;
+ int retval;
+
+ if (cfg_mode == 2) {
+ /* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
+ retval = lpfc_sli_config_port(phba, LPFC_SLI_REV3);
+ if (!retval) {
+ /* Now, try to enable MSI-X interrupt mode */
+ retval = lpfc_sli_enable_msix(phba);
+ if (!retval) {
+ /* Indicate initialization to MSI-X mode */
+ phba->intr_type = MSIX;
+ intr_mode = 2;
+ }
+ }
+ }
+
+ /* Fallback to MSI if MSI-X initialization failed */
+ if (cfg_mode >= 1 && phba->intr_type == NONE) {
+ retval = lpfc_sli_enable_msi(phba);
+ if (!retval) {
+ /* Indicate initialization to MSI mode */
+ phba->intr_type = MSI;
+ intr_mode = 1;
+ }
+ }
+
+ /* Fallback to INTx if both MSI-X/MSI initalization failed */
+ if (phba->intr_type == NONE) {
+ retval = request_irq(phba->pcidev->irq, lpfc_sli_intr_handler,
+ IRQF_SHARED, LPFC_DRIVER_NAME, phba);
+ if (!retval) {
+ /* Indicate initialization to INTx mode */
+ phba->intr_type = INTx;
+ intr_mode = 0;
+ }
+ }
+ return intr_mode;
+}
+
+/**
+ * lpfc_sli_disable_intr - Disable device interrupt to SLI-3 device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable device interrupt and disassociate the
+ * driver's interrupt handler(s) from interrupt vector(s) to device with
+ * SLI-3 interface spec. Depending on the interrupt mode, the driver will
+ * release the interrupt vector(s) for the message signaled interrupt.
+ **/
static void
-lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode)
+lpfc_sli_disable_intr(struct lpfc_hba *phba)
{
- switch (intr_mode) {
- case 0:
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0470 Enable INTx interrupt mode.\n");
- break;
- case 1:
+ /* Disable the currently initialized interrupt mode */
+ if (phba->intr_type == MSIX)
+ lpfc_sli_disable_msix(phba);
+ else if (phba->intr_type == MSI)
+ lpfc_sli_disable_msi(phba);
+ else if (phba->intr_type == INTx)
+ free_irq(phba->pcidev->irq, phba);
+
+ /* Reset interrupt management states */
+ phba->intr_type = NONE;
+ phba->sli.slistat.sli_intr = 0;
+
+ return;
+}
+
+/**
+ * lpfc_sli4_enable_msix - Enable MSI-X interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the MSI-X interrupt vectors to device
+ * with SLI-4 interface spec. The kernel function pci_enable_msix() is called
+ * to enable the MSI-X vectors. Note that pci_enable_msix(), once invoked,
+ * enables either all or nothing, depending on the current availability of
+ * PCI vector resources. The device driver is responsible for calling the
+ * individual request_irq() to register each MSI-X vector with a interrupt
+ * handler, which is done in this function. Note that later when device is
+ * unloading, the driver should always call free_irq() on all MSI-X vectors
+ * it has done request_irq() on before calling pci_disable_msix(). Failure
+ * to do so results in a BUG_ON() and a device will be left with MSI-X
+ * enabled and leaks its vectors.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_sli4_enable_msix(struct lpfc_hba *phba)
+{
+ int rc, index;
+
+ /* Set up MSI-X multi-message vectors */
+ for (index = 0; index < phba->sli4_hba.cfg_eqn; index++)
+ phba->sli4_hba.msix_entries[index].entry = index;
+
+ /* Configure MSI-X capability structure */
+ rc = pci_enable_msix(phba->pcidev, phba->sli4_hba.msix_entries,
+ phba->sli4_hba.cfg_eqn);
+ if (rc) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0481 Enabled MSI interrupt mode.\n");
- break;
- case 2:
+ "0484 PCI enable MSI-X failed (%d)\n", rc);
+ goto msi_fail_out;
+ }
+ /* Log MSI-X vector assignment */
+ for (index = 0; index < phba->sli4_hba.cfg_eqn; index++)
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0480 Enabled MSI-X interrupt mode.\n");
- break;
- default:
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0482 Illegal interrupt mode.\n");
- break;
+ "0489 MSI-X entry[%d]: vector=x%x "
+ "message=%d\n", index,
+ phba->sli4_hba.msix_entries[index].vector,
+ phba->sli4_hba.msix_entries[index].entry);
+ /*
+ * Assign MSI-X vectors to interrupt handlers
+ */
+
+ /* The first vector must associated to slow-path handler for MQ */
+ rc = request_irq(phba->sli4_hba.msix_entries[0].vector,
+ &lpfc_sli4_sp_intr_handler, IRQF_SHARED,
+ LPFC_SP_DRIVER_HANDLER_NAME, phba);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "0485 MSI-X slow-path request_irq failed "
+ "(%d)\n", rc);
+ goto msi_fail_out;
}
- return;
+
+ /* The rest of the vector(s) are associated to fast-path handler(s) */
+ for (index = 1; index < phba->sli4_hba.cfg_eqn; index++) {
+ phba->sli4_hba.fcp_eq_hdl[index - 1].idx = index - 1;
+ phba->sli4_hba.fcp_eq_hdl[index - 1].phba = phba;
+ rc = request_irq(phba->sli4_hba.msix_entries[index].vector,
+ &lpfc_sli4_fp_intr_handler, IRQF_SHARED,
+ LPFC_FP_DRIVER_HANDLER_NAME,
+ &phba->sli4_hba.fcp_eq_hdl[index - 1]);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "0486 MSI-X fast-path (%d) "
+ "request_irq failed (%d)\n", index, rc);
+ goto cfg_fail_out;
+ }
+ }
+
+ return rc;
+
+cfg_fail_out:
+ /* free the irq already requested */
+ for (--index; index >= 1; index--)
+ free_irq(phba->sli4_hba.msix_entries[index - 1].vector,
+ &phba->sli4_hba.fcp_eq_hdl[index - 1]);
+
+ /* free the irq already requested */
+ free_irq(phba->sli4_hba.msix_entries[0].vector, phba);
+
+msi_fail_out:
+ /* Unconfigure MSI-X capability structure */
+ pci_disable_msix(phba->pcidev);
+ return rc;
}
+/**
+ * lpfc_sli4_disable_msix - Disable MSI-X interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to release the MSI-X vectors and then disable the
+ * MSI-X interrupt mode to device with SLI-4 interface spec.
+ **/
static void
-lpfc_stop_port(struct lpfc_hba *phba)
+lpfc_sli4_disable_msix(struct lpfc_hba *phba)
{
- /* Clear all interrupt enable conditions */
- writel(0, phba->HCregaddr);
- readl(phba->HCregaddr); /* flush */
- /* Clear all pending interrupts */
- writel(0xffffffff, phba->HAregaddr);
- readl(phba->HAregaddr); /* flush */
+ int index;
- /* Reset some HBA SLI setup states */
- lpfc_stop_phba_timers(phba);
- phba->pport->work_port_events = 0;
+ /* Free up MSI-X multi-message vectors */
+ free_irq(phba->sli4_hba.msix_entries[0].vector, phba);
+
+ for (index = 1; index < phba->sli4_hba.cfg_eqn; index++)
+ free_irq(phba->sli4_hba.msix_entries[index].vector,
+ &phba->sli4_hba.fcp_eq_hdl[index - 1]);
+ /* Disable MSI-X */
+ pci_disable_msix(phba->pcidev);
+
+ return;
+}
+
+/**
+ * lpfc_sli4_enable_msi - Enable MSI interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the MSI interrupt mode to device with
+ * SLI-4 interface spec. The kernel function pci_enable_msi() is called
+ * to enable the MSI vector. The device driver is responsible for calling
+ * the request_irq() to register MSI vector with a interrupt the handler,
+ * which is done in this function.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_sli4_enable_msi(struct lpfc_hba *phba)
+{
+ int rc, index;
+
+ rc = pci_enable_msi(phba->pcidev);
+ if (!rc)
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0487 PCI enable MSI mode success.\n");
+ else {
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0488 PCI enable MSI mode failed (%d)\n", rc);
+ return rc;
+ }
+
+ rc = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
+ IRQF_SHARED, LPFC_DRIVER_NAME, phba);
+ if (rc) {
+ pci_disable_msi(phba->pcidev);
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "0490 MSI request_irq failed (%d)\n", rc);
+ }
+
+ for (index = 0; index < phba->cfg_fcp_eq_count; index++) {
+ phba->sli4_hba.fcp_eq_hdl[index].idx = index;
+ phba->sli4_hba.fcp_eq_hdl[index].phba = phba;
+ }
+
+ return rc;
+}
+/**
+ * lpfc_sli4_disable_msi - Disable MSI interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable the MSI interrupt mode to device with
+ * SLI-4 interface spec. The driver calls free_irq() on MSI vector it has
+ * done request_irq() on before calling pci_disable_msi(). Failure to do so
+ * results in a BUG_ON() and a device will be left with MSI enabled and leaks
+ * its vector.
+ **/
+static void
+lpfc_sli4_disable_msi(struct lpfc_hba *phba)
+{
+ free_irq(phba->pcidev->irq, phba);
+ pci_disable_msi(phba->pcidev);
return;
}
/**
- * lpfc_enable_intr - Enable device interrupt
+ * lpfc_sli4_enable_intr - Enable device interrupt to SLI-4 device
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable device interrupt and associate driver's
- * interrupt handler(s) to interrupt vector(s). Depends on the interrupt
- * mode configured to the driver, the driver will try to fallback from the
- * configured interrupt mode to an interrupt mode which is supported by the
- * platform, kernel, and device in the order of: MSI-X -> MSI -> IRQ.
+ * interrupt handler(s) to interrupt vector(s) to device with SLI-4
+ * interface spec. Depends on the interrupt mode configured to the driver,
+ * the driver will try to fallback from the configured interrupt mode to an
+ * interrupt mode which is supported by the platform, kernel, and device in
+ * the order of:
+ * MSI-X -> MSI -> IRQ.
*
* Return codes
- * 0 - sucessful
- * other values - error
+ * 0 - sucessful
+ * other values - error
**/
static uint32_t
-lpfc_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
+lpfc_sli4_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
{
uint32_t intr_mode = LPFC_INTR_ERROR;
- int retval;
+ int retval, index;
if (cfg_mode == 2) {
- /* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
- retval = lpfc_sli_config_port(phba, 3);
+ /* Preparation before conf_msi mbox cmd */
+ retval = 0;
if (!retval) {
/* Now, try to enable MSI-X interrupt mode */
- retval = lpfc_enable_msix(phba);
+ retval = lpfc_sli4_enable_msix(phba);
if (!retval) {
/* Indicate initialization to MSI-X mode */
phba->intr_type = MSIX;
@@ -2587,7 +6506,7 @@ lpfc_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
/* Fallback to MSI if MSI-X initialization failed */
if (cfg_mode >= 1 && phba->intr_type == NONE) {
- retval = lpfc_enable_msi(phba);
+ retval = lpfc_sli4_enable_msi(phba);
if (!retval) {
/* Indicate initialization to MSI mode */
phba->intr_type = MSI;
@@ -2597,34 +6516,39 @@ lpfc_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
/* Fallback to INTx if both MSI-X/MSI initalization failed */
if (phba->intr_type == NONE) {
- retval = request_irq(phba->pcidev->irq, lpfc_intr_handler,
+ retval = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
IRQF_SHARED, LPFC_DRIVER_NAME, phba);
if (!retval) {
/* Indicate initialization to INTx mode */
phba->intr_type = INTx;
intr_mode = 0;
+ for (index = 0; index < phba->cfg_fcp_eq_count;
+ index++) {
+ phba->sli4_hba.fcp_eq_hdl[index].idx = index;
+ phba->sli4_hba.fcp_eq_hdl[index].phba = phba;
+ }
}
}
return intr_mode;
}
/**
- * lpfc_disable_intr - Disable device interrupt
+ * lpfc_sli4_disable_intr - Disable device interrupt to SLI-4 device
* @phba: pointer to lpfc hba data structure.
*
- * This routine is invoked to disable device interrupt and disassociate the
- * driver's interrupt handler(s) from interrupt vector(s). Depending on the
- * interrupt mode, the driver will release the interrupt vector(s) for the
- * message signaled interrupt.
+ * This routine is invoked to disable device interrupt and disassociate
+ * the driver's interrupt handler(s) from interrupt vector(s) to device
+ * with SLI-4 interface spec. Depending on the interrupt mode, the driver
+ * will release the interrupt vector(s) for the message signaled interrupt.
**/
static void
-lpfc_disable_intr(struct lpfc_hba *phba)
+lpfc_sli4_disable_intr(struct lpfc_hba *phba)
{
/* Disable the currently initialized interrupt mode */
if (phba->intr_type == MSIX)
- lpfc_disable_msix(phba);
+ lpfc_sli4_disable_msix(phba);
else if (phba->intr_type == MSI)
- lpfc_disable_msi(phba);
+ lpfc_sli4_disable_msi(phba);
else if (phba->intr_type == INTx)
free_irq(phba->pcidev->irq, phba);
@@ -2636,263 +6560,233 @@ lpfc_disable_intr(struct lpfc_hba *phba)
}
/**
- * lpfc_pci_probe_one - lpfc PCI probe func to register device to PCI subsystem
- * @pdev: pointer to PCI device
- * @pid: pointer to PCI device identifier
- *
- * This routine is to be registered to the kernel's PCI subsystem. When an
- * Emulex HBA is presented in PCI bus, the kernel PCI subsystem looks at
- * PCI device-specific information of the device and driver to see if the
- * driver state that it can support this kind of device. If the match is
- * successful, the driver core invokes this routine. If this routine
- * determines it can claim the HBA, it does all the initialization that it
- * needs to do to handle the HBA properly.
+ * lpfc_unset_hba - Unset SLI3 hba device initialization
+ * @phba: pointer to lpfc hba data structure.
*
- * Return code
- * 0 - driver can claim the device
- * negative value - driver can not claim the device
+ * This routine is invoked to unset the HBA device initialization steps to
+ * a device with SLI-3 interface spec.
**/
-static int __devinit
-lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
+static void
+lpfc_unset_hba(struct lpfc_hba *phba)
{
- struct lpfc_vport *vport = NULL;
- struct lpfc_hba *phba;
- struct lpfc_sli *psli;
- struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL;
- struct Scsi_Host *shost = NULL;
- void *ptr;
- unsigned long bar0map_len, bar2map_len;
- int error = -ENODEV, retval;
- int i, hbq_count;
- uint16_t iotag;
- uint32_t cfg_mode, intr_mode;
- int bars = pci_select_bars(pdev, IORESOURCE_MEM);
- struct lpfc_adapter_event_header adapter_event;
-
- if (pci_enable_device_mem(pdev))
- goto out;
- if (pci_request_selected_regions(pdev, bars, LPFC_DRIVER_NAME))
- goto out_disable_device;
+ struct lpfc_vport *vport = phba->pport;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
- phba = kzalloc(sizeof (struct lpfc_hba), GFP_KERNEL);
- if (!phba)
- goto out_release_regions;
+ spin_lock_irq(shost->host_lock);
+ vport->load_flag |= FC_UNLOADING;
+ spin_unlock_irq(shost->host_lock);
- atomic_set(&phba->fast_event_count, 0);
- spin_lock_init(&phba->hbalock);
+ lpfc_stop_hba_timers(phba);
- /* Initialize ndlp management spinlock */
- spin_lock_init(&phba->ndlp_lock);
+ phba->pport->work_port_events = 0;
- phba->pcidev = pdev;
+ lpfc_sli_hba_down(phba);
- /* Assign an unused board number */
- if ((phba->brd_no = lpfc_get_instance()) < 0)
- goto out_free_phba;
+ lpfc_sli_brdrestart(phba);
- INIT_LIST_HEAD(&phba->port_list);
- init_waitqueue_head(&phba->wait_4_mlo_m_q);
- /*
- * Get all the module params for configuring this host and then
- * establish the host.
- */
- lpfc_get_cfgparam(phba);
- phba->max_vpi = LPFC_MAX_VPI;
+ lpfc_sli_disable_intr(phba);
- /* Initialize timers used by driver */
- init_timer(&phba->hb_tmofunc);
- phba->hb_tmofunc.function = lpfc_hb_timeout;
- phba->hb_tmofunc.data = (unsigned long)phba;
+ return;
+}
- psli = &phba->sli;
- init_timer(&psli->mbox_tmo);
- psli->mbox_tmo.function = lpfc_mbox_timeout;
- psli->mbox_tmo.data = (unsigned long) phba;
- init_timer(&phba->fcp_poll_timer);
- phba->fcp_poll_timer.function = lpfc_poll_timeout;
- phba->fcp_poll_timer.data = (unsigned long) phba;
- init_timer(&phba->fabric_block_timer);
- phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
- phba->fabric_block_timer.data = (unsigned long) phba;
- init_timer(&phba->eratt_poll);
- phba->eratt_poll.function = lpfc_poll_eratt;
- phba->eratt_poll.data = (unsigned long) phba;
+/**
+ * lpfc_sli4_unset_hba - Unset SLI4 hba device initialization.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the HBA device initialization steps to
+ * a device with SLI-4 interface spec.
+ **/
+static void
+lpfc_sli4_unset_hba(struct lpfc_hba *phba)
+{
+ struct lpfc_vport *vport = phba->pport;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
- pci_set_master(pdev);
- pci_save_state(pdev);
- pci_try_set_mwi(pdev);
+ spin_lock_irq(shost->host_lock);
+ vport->load_flag |= FC_UNLOADING;
+ spin_unlock_irq(shost->host_lock);
- if (pci_set_dma_mask(phba->pcidev, DMA_BIT_MASK(64)) != 0)
- if (pci_set_dma_mask(phba->pcidev, DMA_BIT_MASK(32)) != 0)
- goto out_idr_remove;
+ phba->pport->work_port_events = 0;
- /*
- * Get the bus address of Bar0 and Bar2 and the number of bytes
- * required by each mapping.
- */
- phba->pci_bar0_map = pci_resource_start(phba->pcidev, 0);
- bar0map_len = pci_resource_len(phba->pcidev, 0);
+ lpfc_sli4_hba_down(phba);
- phba->pci_bar2_map = pci_resource_start(phba->pcidev, 2);
- bar2map_len = pci_resource_len(phba->pcidev, 2);
+ lpfc_sli4_disable_intr(phba);
- /* Map HBA SLIM to a kernel virtual address. */
- phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len);
- if (!phba->slim_memmap_p) {
- error = -ENODEV;
- dev_printk(KERN_ERR, &pdev->dev,
- "ioremap failed for SLIM memory.\n");
- goto out_idr_remove;
- }
-
- /* Map HBA Control Registers to a kernel virtual address. */
- phba->ctrl_regs_memmap_p = ioremap(phba->pci_bar2_map, bar2map_len);
- if (!phba->ctrl_regs_memmap_p) {
- error = -ENODEV;
- dev_printk(KERN_ERR, &pdev->dev,
- "ioremap failed for HBA control registers.\n");
- goto out_iounmap_slim;
- }
+ return;
+}
- /* Allocate memory for SLI-2 structures */
- phba->slim2p.virt = dma_alloc_coherent(&phba->pcidev->dev,
- SLI2_SLIM_SIZE,
- &phba->slim2p.phys,
- GFP_KERNEL);
- if (!phba->slim2p.virt)
- goto out_iounmap;
+/**
+ * lpfc_sli4_hba_unset - Unset the fcoe hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called in the SLI4 code path to reset the HBA's FCoE
+ * function. The caller is not required to hold any lock. This routine
+ * issues PCI function reset mailbox command to reset the FCoE function.
+ * At the end of the function, it calls lpfc_hba_down_post function to
+ * free any pending commands.
+ **/
+static void
+lpfc_sli4_hba_unset(struct lpfc_hba *phba)
+{
+ int wait_cnt = 0;
+ LPFC_MBOXQ_t *mboxq;
- memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE);
- phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx);
- phba->pcb = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, pcb));
- phba->IOCBs = (phba->slim2p.virt +
- offsetof(struct lpfc_sli2_slim, IOCBs));
+ lpfc_stop_hba_timers(phba);
+ phba->sli4_hba.intr_enable = 0;
- phba->hbqslimp.virt = dma_alloc_coherent(&phba->pcidev->dev,
- lpfc_sli_hbq_size(),
- &phba->hbqslimp.phys,
- GFP_KERNEL);
- if (!phba->hbqslimp.virt)
- goto out_free_slim;
+ /*
+ * Gracefully wait out the potential current outstanding asynchronous
+ * mailbox command.
+ */
- hbq_count = lpfc_sli_hbq_count();
- ptr = phba->hbqslimp.virt;
- for (i = 0; i < hbq_count; ++i) {
- phba->hbqs[i].hbq_virt = ptr;
- INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
- ptr += (lpfc_hbq_defs[i]->entry_count *
- sizeof(struct lpfc_hbq_entry));
+ /* First, block any pending async mailbox command from posted */
+ spin_lock_irq(&phba->hbalock);
+ phba->sli.sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
+ spin_unlock_irq(&phba->hbalock);
+ /* Now, trying to wait it out if we can */
+ while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+ msleep(10);
+ if (++wait_cnt > LPFC_ACTIVE_MBOX_WAIT_CNT)
+ break;
}
- phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_els_hbq_alloc;
- phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_els_hbq_free;
-
- memset(phba->hbqslimp.virt, 0, lpfc_sli_hbq_size());
-
- INIT_LIST_HEAD(&phba->hbqbuf_in_list);
-
- /* Initialize the SLI Layer to run with lpfc HBAs. */
- lpfc_sli_setup(phba);
- lpfc_sli_queue_setup(phba);
-
- retval = lpfc_mem_alloc(phba);
- if (retval) {
- error = retval;
- goto out_free_hbqslimp;
+ /* Forcefully release the outstanding mailbox command if timed out */
+ if (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+ spin_lock_irq(&phba->hbalock);
+ mboxq = phba->sli.mbox_active;
+ mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
+ __lpfc_mbox_cmpl_put(phba, mboxq);
+ phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ phba->sli.mbox_active = NULL;
+ spin_unlock_irq(&phba->hbalock);
}
- /* Initialize and populate the iocb list per host. */
- INIT_LIST_HEAD(&phba->lpfc_iocb_list);
- for (i = 0; i < LPFC_IOCB_LIST_CNT; i++) {
- iocbq_entry = kzalloc(sizeof(struct lpfc_iocbq), GFP_KERNEL);
- if (iocbq_entry == NULL) {
- printk(KERN_ERR "%s: only allocated %d iocbs of "
- "expected %d count. Unloading driver.\n",
- __func__, i, LPFC_IOCB_LIST_CNT);
- error = -ENOMEM;
- goto out_free_iocbq;
- }
+ /* Tear down the queues in the HBA */
+ lpfc_sli4_queue_unset(phba);
- iotag = lpfc_sli_next_iotag(phba, iocbq_entry);
- if (iotag == 0) {
- kfree (iocbq_entry);
- printk(KERN_ERR "%s: failed to allocate IOTAG. "
- "Unloading driver.\n",
- __func__);
- error = -ENOMEM;
- goto out_free_iocbq;
- }
+ /* Disable PCI subsystem interrupt */
+ lpfc_sli4_disable_intr(phba);
- spin_lock_irq(&phba->hbalock);
- list_add(&iocbq_entry->list, &phba->lpfc_iocb_list);
- phba->total_iocbq_bufs++;
- spin_unlock_irq(&phba->hbalock);
- }
+ /* Stop kthread signal shall trigger work_done one more time */
+ kthread_stop(phba->worker_thread);
- /* Initialize HBA structure */
- phba->fc_edtov = FF_DEF_EDTOV;
- phba->fc_ratov = FF_DEF_RATOV;
- phba->fc_altov = FF_DEF_ALTOV;
- phba->fc_arbtov = FF_DEF_ARBTOV;
+ /* Stop the SLI4 device port */
+ phba->pport->work_port_events = 0;
+}
- INIT_LIST_HEAD(&phba->work_list);
- phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT);
- phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4));
+/**
+ * lpfc_pci_probe_one_s3 - PCI probe func to reg SLI-3 device to PCI subsystem.
+ * @pdev: pointer to PCI device
+ * @pid: pointer to PCI device identifier
+ *
+ * This routine is to be called to attach a device with SLI-3 interface spec
+ * to the PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
+ * presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific
+ * information of the device and driver to see if the driver state that it can
+ * support this kind of device. If the match is successful, the driver core
+ * invokes this routine. If this routine determines it can claim the HBA, it
+ * does all the initialization that it needs to do to handle the HBA properly.
+ *
+ * Return code
+ * 0 - driver can claim the device
+ * negative value - driver can not claim the device
+ **/
+static int __devinit
+lpfc_pci_probe_one_s3(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+ struct lpfc_hba *phba;
+ struct lpfc_vport *vport = NULL;
+ int error;
+ uint32_t cfg_mode, intr_mode;
- /* Initialize the wait queue head for the kernel thread */
- init_waitqueue_head(&phba->work_waitq);
+ /* Allocate memory for HBA structure */
+ phba = lpfc_hba_alloc(pdev);
+ if (!phba)
+ return -ENOMEM;
- /* Startup the kernel thread for this host adapter. */
- phba->worker_thread = kthread_run(lpfc_do_work, phba,
- "lpfc_worker_%d", phba->brd_no);
- if (IS_ERR(phba->worker_thread)) {
- error = PTR_ERR(phba->worker_thread);
- goto out_free_iocbq;
+ /* Perform generic PCI device enabling operation */
+ error = lpfc_enable_pci_dev(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1401 Failed to enable pci device.\n");
+ goto out_free_phba;
}
- /* Initialize the list of scsi buffers used by driver for scsi IO. */
- spin_lock_init(&phba->scsi_buf_list_lock);
- INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list);
+ /* Set up SLI API function jump table for PCI-device group-0 HBAs */
+ error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_LP);
+ if (error)
+ goto out_disable_pci_dev;
- /* Initialize list of fabric iocbs */
- INIT_LIST_HEAD(&phba->fabric_iocb_list);
+ /* Set up SLI-3 specific device PCI memory space */
+ error = lpfc_sli_pci_mem_setup(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1402 Failed to set up pci memory space.\n");
+ goto out_disable_pci_dev;
+ }
- /* Initialize list to save ELS buffers */
- INIT_LIST_HEAD(&phba->elsbuf);
+ /* Set up phase-1 common device driver resources */
+ error = lpfc_setup_driver_resource_phase1(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1403 Failed to set up driver resource.\n");
+ goto out_unset_pci_mem_s3;
+ }
- vport = lpfc_create_port(phba, phba->brd_no, &phba->pcidev->dev);
- if (!vport)
- goto out_kthread_stop;
+ /* Set up SLI-3 specific device driver resources */
+ error = lpfc_sli_driver_resource_setup(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1404 Failed to set up driver resource.\n");
+ goto out_unset_pci_mem_s3;
+ }
- shost = lpfc_shost_from_vport(vport);
- phba->pport = vport;
- lpfc_debugfs_initialize(vport);
+ /* Initialize and populate the iocb list per host */
+ error = lpfc_init_iocb_list(phba, LPFC_IOCB_LIST_CNT);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1405 Failed to initialize iocb list.\n");
+ goto out_unset_driver_resource_s3;
+ }
- pci_set_drvdata(pdev, shost);
+ /* Set up common device driver resources */
+ error = lpfc_setup_driver_resource_phase2(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1406 Failed to set up driver resource.\n");
+ goto out_free_iocb_list;
+ }
- phba->MBslimaddr = phba->slim_memmap_p;
- phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
- phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
- phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
- phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
+ /* Create SCSI host to the physical port */
+ error = lpfc_create_shost(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1407 Failed to create scsi host.\n");
+ goto out_unset_driver_resource;
+ }
/* Configure sysfs attributes */
- if (lpfc_alloc_sysfs_attr(vport)) {
+ vport = phba->pport;
+ error = lpfc_alloc_sysfs_attr(vport);
+ if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1476 Failed to allocate sysfs attr\n");
- error = -ENOMEM;
- goto out_destroy_port;
+ goto out_destroy_shost;
}
+ /* Now, trying to enable interrupt and bring up the device */
cfg_mode = phba->cfg_use_msi;
while (true) {
+ /* Put device to a known state before enabling interrupt */
+ lpfc_stop_port(phba);
/* Configure and enable interrupt */
- intr_mode = lpfc_enable_intr(phba, cfg_mode);
+ intr_mode = lpfc_sli_enable_intr(phba, cfg_mode);
if (intr_mode == LPFC_INTR_ERROR) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0426 Failed to enable interrupt.\n");
+ "0431 Failed to enable interrupt.\n");
+ error = -ENODEV;
goto out_free_sysfs_attr;
}
- /* HBA SLI setup */
+ /* SLI-3 HBA setup */
if (lpfc_sli_hba_setup(phba)) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1477 Failed to set up hba\n");
@@ -2902,185 +6796,65 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
/* Wait 50ms for the interrupts of previous mailbox commands */
msleep(50);
- /* Check active interrupts received */
- if (phba->sli.slistat.sli_intr > LPFC_MSIX_VECTORS) {
+ /* Check active interrupts on message signaled interrupts */
+ if (intr_mode == 0 ||
+ phba->sli.slistat.sli_intr > LPFC_MSIX_VECTORS) {
/* Log the current active interrupt mode */
phba->intr_mode = intr_mode;
lpfc_log_intr_mode(phba, intr_mode);
break;
} else {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0451 Configure interrupt mode (%d) "
+ "0447 Configure interrupt mode (%d) "
"failed active interrupt test.\n",
intr_mode);
- if (intr_mode == 0) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0479 Failed to enable "
- "interrupt.\n");
- error = -ENODEV;
- goto out_remove_device;
- }
- /* Stop HBA SLI setups */
- lpfc_stop_port(phba);
/* Disable the current interrupt mode */
- lpfc_disable_intr(phba);
+ lpfc_sli_disable_intr(phba);
/* Try next level of interrupt mode */
cfg_mode = --intr_mode;
}
}
- /*
- * hba setup may have changed the hba_queue_depth so we need to adjust
- * the value of can_queue.
- */
- shost->can_queue = phba->cfg_hba_queue_depth - 10;
- if (phba->sli3_options & LPFC_SLI3_BG_ENABLED) {
-
- if (lpfc_prot_mask && lpfc_prot_guard) {
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "1478 Registering BlockGuard with the "
- "SCSI layer\n");
+ /* Perform post initialization setup */
+ lpfc_post_init_setup(phba);
- scsi_host_set_prot(shost, lpfc_prot_mask);
- scsi_host_set_guard(shost, lpfc_prot_guard);
- }
- }
-
- if (!_dump_buf_data) {
- int pagecnt = 10;
- while (pagecnt) {
- spin_lock_init(&_dump_buf_lock);
- _dump_buf_data =
- (char *) __get_free_pages(GFP_KERNEL, pagecnt);
- if (_dump_buf_data) {
- printk(KERN_ERR "BLKGRD allocated %d pages for "
- "_dump_buf_data at 0x%p\n",
- (1 << pagecnt), _dump_buf_data);
- _dump_buf_data_order = pagecnt;
- memset(_dump_buf_data, 0, ((1 << PAGE_SHIFT)
- << pagecnt));
- break;
- } else {
- --pagecnt;
- }
-
- }
-
- if (!_dump_buf_data_order)
- printk(KERN_ERR "BLKGRD ERROR unable to allocate "
- "memory for hexdump\n");
-
- } else {
- printk(KERN_ERR "BLKGRD already allocated _dump_buf_data=0x%p"
- "\n", _dump_buf_data);
- }
-
-
- if (!_dump_buf_dif) {
- int pagecnt = 10;
- while (pagecnt) {
- _dump_buf_dif =
- (char *) __get_free_pages(GFP_KERNEL, pagecnt);
- if (_dump_buf_dif) {
- printk(KERN_ERR "BLKGRD allocated %d pages for "
- "_dump_buf_dif at 0x%p\n",
- (1 << pagecnt), _dump_buf_dif);
- _dump_buf_dif_order = pagecnt;
- memset(_dump_buf_dif, 0, ((1 << PAGE_SHIFT)
- << pagecnt));
- break;
- } else {
- --pagecnt;
- }
-
- }
-
- if (!_dump_buf_dif_order)
- printk(KERN_ERR "BLKGRD ERROR unable to allocate "
- "memory for hexdump\n");
-
- } else {
- printk(KERN_ERR "BLKGRD already allocated _dump_buf_dif=0x%p\n",
- _dump_buf_dif);
- }
-
- lpfc_host_attrib_init(shost);
-
- if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
- spin_lock_irq(shost->host_lock);
- lpfc_poll_start_timer(phba);
- spin_unlock_irq(shost->host_lock);
- }
-
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0428 Perform SCSI scan\n");
- /* Send board arrival event to upper layer */
- adapter_event.event_type = FC_REG_ADAPTER_EVENT;
- adapter_event.subcategory = LPFC_EVENT_ARRIVAL;
- fc_host_post_vendor_event(shost, fc_get_event_number(),
- sizeof(adapter_event),
- (char *) &adapter_event,
- LPFC_NL_VENDOR_ID);
+ /* Check if there are static vports to be created. */
+ lpfc_create_static_vport(phba);
return 0;
out_remove_device:
- spin_lock_irq(shost->host_lock);
- vport->load_flag |= FC_UNLOADING;
- spin_unlock_irq(shost->host_lock);
- lpfc_stop_phba_timers(phba);
- phba->pport->work_port_events = 0;
- lpfc_disable_intr(phba);
- lpfc_sli_hba_down(phba);
- lpfc_sli_brdrestart(phba);
+ lpfc_unset_hba(phba);
out_free_sysfs_attr:
lpfc_free_sysfs_attr(vport);
-out_destroy_port:
- destroy_port(vport);
-out_kthread_stop:
- kthread_stop(phba->worker_thread);
-out_free_iocbq:
- list_for_each_entry_safe(iocbq_entry, iocbq_next,
- &phba->lpfc_iocb_list, list) {
- kfree(iocbq_entry);
- phba->total_iocbq_bufs--;
- }
- lpfc_mem_free(phba);
-out_free_hbqslimp:
- dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
- phba->hbqslimp.virt, phba->hbqslimp.phys);
-out_free_slim:
- dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
- phba->slim2p.virt, phba->slim2p.phys);
-out_iounmap:
- iounmap(phba->ctrl_regs_memmap_p);
-out_iounmap_slim:
- iounmap(phba->slim_memmap_p);
-out_idr_remove:
- idr_remove(&lpfc_hba_index, phba->brd_no);
+out_destroy_shost:
+ lpfc_destroy_shost(phba);
+out_unset_driver_resource:
+ lpfc_unset_driver_resource_phase2(phba);
+out_free_iocb_list:
+ lpfc_free_iocb_list(phba);
+out_unset_driver_resource_s3:
+ lpfc_sli_driver_resource_unset(phba);
+out_unset_pci_mem_s3:
+ lpfc_sli_pci_mem_unset(phba);
+out_disable_pci_dev:
+ lpfc_disable_pci_dev(phba);
out_free_phba:
- kfree(phba);
-out_release_regions:
- pci_release_selected_regions(pdev, bars);
-out_disable_device:
- pci_disable_device(pdev);
-out:
- pci_set_drvdata(pdev, NULL);
- if (shost)
- scsi_host_put(shost);
+ lpfc_hba_free(phba);
return error;
}
/**
- * lpfc_pci_remove_one - lpfc PCI func to unregister device from PCI subsystem
+ * lpfc_pci_remove_one_s3 - PCI func to unreg SLI-3 device from PCI subsystem.
* @pdev: pointer to PCI device
*
- * This routine is to be registered to the kernel's PCI subsystem. When an
- * Emulex HBA is removed from PCI bus, it performs all the necessary cleanup
- * for the HBA device to be removed from the PCI subsystem properly.
+ * This routine is to be called to disattach a device with SLI-3 interface
+ * spec from PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
+ * removed from PCI bus, it performs all the necessary cleanup for the HBA
+ * device to be removed from the PCI subsystem properly.
**/
static void __devexit
-lpfc_pci_remove_one(struct pci_dev *pdev)
+lpfc_pci_remove_one_s3(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
@@ -3098,7 +6872,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
/* Release all the vports against this physical port */
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for (i = 1; i <= phba->max_vpi && vports[i] != NULL; i++)
+ for (i = 1; i <= phba->max_vports && vports[i] != NULL; i++)
fc_vport_terminate(vports[i]->fc_vport);
lpfc_destroy_vport_work_array(phba, vports);
@@ -3120,7 +6894,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
/* Final cleanup of txcmplq and reset the HBA */
lpfc_sli_brdrestart(phba);
- lpfc_stop_phba_timers(phba);
+ lpfc_stop_hba_timers(phba);
spin_lock_irq(&phba->hbalock);
list_del_init(&vport->listentry);
spin_unlock_irq(&phba->hbalock);
@@ -3128,7 +6902,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
lpfc_debugfs_terminate(vport);
/* Disable interrupt */
- lpfc_disable_intr(phba);
+ lpfc_sli_disable_intr(phba);
pci_set_drvdata(pdev, NULL);
scsi_host_put(shost);
@@ -3138,7 +6912,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
* corresponding pools here.
*/
lpfc_scsi_free(phba);
- lpfc_mem_free(phba);
+ lpfc_mem_free_all(phba);
dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
phba->hbqslimp.virt, phba->hbqslimp.phys);
@@ -3151,36 +6925,35 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
iounmap(phba->ctrl_regs_memmap_p);
iounmap(phba->slim_memmap_p);
- idr_remove(&lpfc_hba_index, phba->brd_no);
-
- kfree(phba);
+ lpfc_hba_free(phba);
pci_release_selected_regions(pdev, bars);
pci_disable_device(pdev);
}
/**
- * lpfc_pci_suspend_one - lpfc PCI func to suspend device for power management
+ * lpfc_pci_suspend_one_s3 - PCI func to suspend SLI-3 device for power mgmnt
* @pdev: pointer to PCI device
* @msg: power management message
*
- * This routine is to be registered to the kernel's PCI subsystem to support
- * system Power Management (PM). When PM invokes this method, it quiesces the
- * device by stopping the driver's worker thread for the device, turning off
- * device's interrupt and DMA, and bring the device offline. Note that as the
- * driver implements the minimum PM requirements to a power-aware driver's PM
- * support for suspend/resume -- all the possible PM messages (SUSPEND,
- * HIBERNATE, FREEZE) to the suspend() method call will be treated as SUSPEND
- * and the driver will fully reinitialize its device during resume() method
- * call, the driver will set device to PCI_D3hot state in PCI config space
- * instead of setting it according to the @msg provided by the PM.
+ * This routine is to be called from the kernel's PCI subsystem to support
+ * system Power Management (PM) to device with SLI-3 interface spec. When
+ * PM invokes this method, it quiesces the device by stopping the driver's
+ * worker thread for the device, turning off device's interrupt and DMA,
+ * and bring the device offline. Note that as the driver implements the
+ * minimum PM requirements to a power-aware driver's PM support for the
+ * suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE)
+ * to the suspend() method call will be treated as SUSPEND and the driver will
+ * fully reinitialize its device during resume() method call, the driver will
+ * set device to PCI_D3hot state in PCI config space instead of setting it
+ * according to the @msg provided by the PM.
*
* Return code
- * 0 - driver suspended the device
- * Error otherwise
+ * 0 - driver suspended the device
+ * Error otherwise
**/
static int
-lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
+lpfc_pci_suspend_one_s3(struct pci_dev *pdev, pm_message_t msg)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3194,7 +6967,7 @@ lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
kthread_stop(phba->worker_thread);
/* Disable interrupt from device */
- lpfc_disable_intr(phba);
+ lpfc_sli_disable_intr(phba);
/* Save device state to PCI config space */
pci_save_state(pdev);
@@ -3204,25 +6977,26 @@ lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
}
/**
- * lpfc_pci_resume_one - lpfc PCI func to resume device for power management
+ * lpfc_pci_resume_one_s3 - PCI func to resume SLI-3 device for power mgmnt
* @pdev: pointer to PCI device
*
- * This routine is to be registered to the kernel's PCI subsystem to support
- * system Power Management (PM). When PM invokes this method, it restores
- * the device's PCI config space state and fully reinitializes the device
- * and brings it online. Note that as the driver implements the minimum PM
- * requirements to a power-aware driver's PM for suspend/resume -- all
- * the possible PM messages (SUSPEND, HIBERNATE, FREEZE) to the suspend()
- * method call will be treated as SUSPEND and the driver will fully
- * reinitialize its device during resume() method call, the device will be
- * set to PCI_D0 directly in PCI config space before restoring the state.
+ * This routine is to be called from the kernel's PCI subsystem to support
+ * system Power Management (PM) to device with SLI-3 interface spec. When PM
+ * invokes this method, it restores the device's PCI config space state and
+ * fully reinitializes the device and brings it online. Note that as the
+ * driver implements the minimum PM requirements to a power-aware driver's
+ * PM for suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE,
+ * FREEZE) to the suspend() method call will be treated as SUSPEND and the
+ * driver will fully reinitialize its device during resume() method call,
+ * the device will be set to PCI_D0 directly in PCI config space before
+ * restoring the state.
*
* Return code
- * 0 - driver suspended the device
- * Error otherwise
+ * 0 - driver suspended the device
+ * Error otherwise
**/
static int
-lpfc_pci_resume_one(struct pci_dev *pdev)
+lpfc_pci_resume_one_s3(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3250,7 +7024,7 @@ lpfc_pci_resume_one(struct pci_dev *pdev)
}
/* Configure and enable interrupt */
- intr_mode = lpfc_enable_intr(phba, phba->intr_mode);
+ intr_mode = lpfc_sli_enable_intr(phba, phba->intr_mode);
if (intr_mode == LPFC_INTR_ERROR) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0430 PM resume Failed to enable interrupt\n");
@@ -3269,23 +7043,24 @@ lpfc_pci_resume_one(struct pci_dev *pdev)
}
/**
- * lpfc_io_error_detected - Driver method for handling PCI I/O error detected
+ * lpfc_io_error_detected_s3 - Method for handling SLI-3 device PCI I/O error
* @pdev: pointer to PCI device.
* @state: the current PCI connection state.
*
- * This routine is registered to the PCI subsystem for error handling. This
- * function is called by the PCI subsystem after a PCI bus error affecting
- * this device has been detected. When this function is invoked, it will
- * need to stop all the I/Os and interrupt(s) to the device. Once that is
- * done, it will return PCI_ERS_RESULT_NEED_RESET for the PCI subsystem to
- * perform proper recovery as desired.
+ * This routine is called from the PCI subsystem for I/O error handling to
+ * device with SLI-3 interface spec. This function is called by the PCI
+ * subsystem after a PCI bus error affecting this device has been detected.
+ * When this function is invoked, it will need to stop all the I/Os and
+ * interrupt(s) to the device. Once that is done, it will return
+ * PCI_ERS_RESULT_NEED_RESET for the PCI subsystem to perform proper recovery
+ * as desired.
*
* Return codes
- * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
- * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
+ * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
**/
-static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev,
- pci_channel_state_t state)
+static pci_ers_result_t
+lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3312,30 +7087,32 @@ static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev,
lpfc_sli_abort_iocb_ring(phba, pring);
/* Disable interrupt */
- lpfc_disable_intr(phba);
+ lpfc_sli_disable_intr(phba);
/* Request a slot reset. */
return PCI_ERS_RESULT_NEED_RESET;
}
/**
- * lpfc_io_slot_reset - Restart a PCI device from scratch
+ * lpfc_io_slot_reset_s3 - Method for restarting PCI SLI-3 device from scratch.
* @pdev: pointer to PCI device.
*
- * This routine is registered to the PCI subsystem for error handling. This is
- * called after PCI bus has been reset to restart the PCI card from scratch,
- * as if from a cold-boot. During the PCI subsystem error recovery, after the
- * driver returns PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform
- * proper error recovery and then call this routine before calling the .resume
- * method to recover the device. This function will initialize the HBA device,
- * enable the interrupt, but it will just put the HBA to offline state without
- * passing any I/O traffic.
+ * This routine is called from the PCI subsystem for error handling to
+ * device with SLI-3 interface spec. This is called after PCI bus has been
+ * reset to restart the PCI card from scratch, as if from a cold-boot.
+ * During the PCI subsystem error recovery, after driver returns
+ * PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error
+ * recovery and then call this routine before calling the .resume method
+ * to recover the device. This function will initialize the HBA device,
+ * enable the interrupt, but it will just put the HBA to offline state
+ * without passing any I/O traffic.
*
* Return codes
- * PCI_ERS_RESULT_RECOVERED - the device has been recovered
- * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ * PCI_ERS_RESULT_RECOVERED - the device has been recovered
+ * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
*/
-static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
+static pci_ers_result_t
+lpfc_io_slot_reset_s3(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3354,11 +7131,11 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
pci_set_master(pdev);
spin_lock_irq(&phba->hbalock);
- psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+ psli->sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
/* Configure and enable interrupt */
- intr_mode = lpfc_enable_intr(phba, phba->intr_mode);
+ intr_mode = lpfc_sli_enable_intr(phba, phba->intr_mode);
if (intr_mode == LPFC_INTR_ERROR) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0427 Cannot re-enable interrupt after "
@@ -3378,20 +7155,713 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
}
/**
- * lpfc_io_resume - Resume PCI I/O operation
+ * lpfc_io_resume_s3 - Method for resuming PCI I/O operation on SLI-3 device.
* @pdev: pointer to PCI device
*
- * This routine is registered to the PCI subsystem for error handling. It is
- * called when kernel error recovery tells the lpfc driver that it is ok to
- * resume normal PCI operation after PCI bus error recovery. After this call,
- * traffic can start to flow from this device again.
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-3 interface spec. It is called when kernel error recovery tells
+ * the lpfc driver that it is ok to resume normal PCI operation after PCI bus
+ * error recovery. After this call, traffic can start to flow from this device
+ * again.
*/
-static void lpfc_io_resume(struct pci_dev *pdev)
+static void
+lpfc_io_resume_s3(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+ lpfc_online(phba);
+}
+
+/**
+ * lpfc_sli4_get_els_iocb_cnt - Calculate the # of ELS IOCBs to reserve
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * returns the number of ELS/CT IOCBs to reserve
+ **/
+int
+lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba)
+{
+ int max_xri = phba->sli4_hba.max_cfg_param.max_xri;
+
+ if (max_xri <= 100)
+ return 4;
+ else if (max_xri <= 256)
+ return 8;
+ else if (max_xri <= 512)
+ return 16;
+ else if (max_xri <= 1024)
+ return 32;
+ else
+ return 48;
+}
+
+/**
+ * lpfc_pci_probe_one_s4 - PCI probe func to reg SLI-4 device to PCI subsys
+ * @pdev: pointer to PCI device
+ * @pid: pointer to PCI device identifier
+ *
+ * This routine is called from the kernel's PCI subsystem to device with
+ * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
+ * presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific
+ * information of the device and driver to see if the driver state that it
+ * can support this kind of device. If the match is successful, the driver
+ * core invokes this routine. If this routine determines it can claim the HBA,
+ * it does all the initialization that it needs to do to handle the HBA
+ * properly.
+ *
+ * Return code
+ * 0 - driver can claim the device
+ * negative value - driver can not claim the device
+ **/
+static int __devinit
+lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+ struct lpfc_hba *phba;
+ struct lpfc_vport *vport = NULL;
+ int error;
+ uint32_t cfg_mode, intr_mode;
+ int mcnt;
+
+ /* Allocate memory for HBA structure */
+ phba = lpfc_hba_alloc(pdev);
+ if (!phba)
+ return -ENOMEM;
+
+ /* Perform generic PCI device enabling operation */
+ error = lpfc_enable_pci_dev(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1409 Failed to enable pci device.\n");
+ goto out_free_phba;
+ }
+
+ /* Set up SLI API function jump table for PCI-device group-1 HBAs */
+ error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_OC);
+ if (error)
+ goto out_disable_pci_dev;
+
+ /* Set up SLI-4 specific device PCI memory space */
+ error = lpfc_sli4_pci_mem_setup(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1410 Failed to set up pci memory space.\n");
+ goto out_disable_pci_dev;
+ }
+
+ /* Set up phase-1 common device driver resources */
+ error = lpfc_setup_driver_resource_phase1(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1411 Failed to set up driver resource.\n");
+ goto out_unset_pci_mem_s4;
+ }
+
+ /* Set up SLI-4 Specific device driver resources */
+ error = lpfc_sli4_driver_resource_setup(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1412 Failed to set up driver resource.\n");
+ goto out_unset_pci_mem_s4;
+ }
+
+ /* Initialize and populate the iocb list per host */
+ error = lpfc_init_iocb_list(phba,
+ phba->sli4_hba.max_cfg_param.max_xri);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1413 Failed to initialize iocb list.\n");
+ goto out_unset_driver_resource_s4;
+ }
+
+ /* Set up common device driver resources */
+ error = lpfc_setup_driver_resource_phase2(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1414 Failed to set up driver resource.\n");
+ goto out_free_iocb_list;
+ }
+
+ /* Create SCSI host to the physical port */
+ error = lpfc_create_shost(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1415 Failed to create scsi host.\n");
+ goto out_unset_driver_resource;
+ }
+
+ /* Configure sysfs attributes */
+ vport = phba->pport;
+ error = lpfc_alloc_sysfs_attr(vport);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1416 Failed to allocate sysfs attr\n");
+ goto out_destroy_shost;
+ }
+
+ /* Now, trying to enable interrupt and bring up the device */
+ cfg_mode = phba->cfg_use_msi;
+ while (true) {
+ /* Put device to a known state before enabling interrupt */
+ lpfc_stop_port(phba);
+ /* Configure and enable interrupt */
+ intr_mode = lpfc_sli4_enable_intr(phba, cfg_mode);
+ if (intr_mode == LPFC_INTR_ERROR) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0426 Failed to enable interrupt.\n");
+ error = -ENODEV;
+ goto out_free_sysfs_attr;
+ }
+ /* Set up SLI-4 HBA */
+ if (lpfc_sli4_hba_setup(phba)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1421 Failed to set up hba\n");
+ error = -ENODEV;
+ goto out_disable_intr;
+ }
+
+ /* Send NOP mbx cmds for non-INTx mode active interrupt test */
+ if (intr_mode != 0)
+ mcnt = lpfc_sli4_send_nop_mbox_cmds(phba,
+ LPFC_ACT_INTR_CNT);
+
+ /* Check active interrupts received only for MSI/MSI-X */
+ if (intr_mode == 0 ||
+ phba->sli.slistat.sli_intr >= LPFC_ACT_INTR_CNT) {
+ /* Log the current active interrupt mode */
+ phba->intr_mode = intr_mode;
+ lpfc_log_intr_mode(phba, intr_mode);
+ break;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0451 Configure interrupt mode (%d) "
+ "failed active interrupt test.\n",
+ intr_mode);
+ /* Unset the preivous SLI-4 HBA setup */
+ lpfc_sli4_unset_hba(phba);
+ /* Try next level of interrupt mode */
+ cfg_mode = --intr_mode;
+ }
+
+ /* Perform post initialization setup */
+ lpfc_post_init_setup(phba);
+
+ return 0;
+
+out_disable_intr:
+ lpfc_sli4_disable_intr(phba);
+out_free_sysfs_attr:
+ lpfc_free_sysfs_attr(vport);
+out_destroy_shost:
+ lpfc_destroy_shost(phba);
+out_unset_driver_resource:
+ lpfc_unset_driver_resource_phase2(phba);
+out_free_iocb_list:
+ lpfc_free_iocb_list(phba);
+out_unset_driver_resource_s4:
+ lpfc_sli4_driver_resource_unset(phba);
+out_unset_pci_mem_s4:
+ lpfc_sli4_pci_mem_unset(phba);
+out_disable_pci_dev:
+ lpfc_disable_pci_dev(phba);
+out_free_phba:
+ lpfc_hba_free(phba);
+ return error;
+}
+
+/**
+ * lpfc_pci_remove_one_s4 - PCI func to unreg SLI-4 device from PCI subsystem
+ * @pdev: pointer to PCI device
+ *
+ * This routine is called from the kernel's PCI subsystem to device with
+ * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
+ * removed from PCI bus, it performs all the necessary cleanup for the HBA
+ * device to be removed from the PCI subsystem properly.
+ **/
+static void __devexit
+lpfc_pci_remove_one_s4(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_vport **vports;
+ struct lpfc_hba *phba = vport->phba;
+ int i;
+
+ /* Mark the device unloading flag */
+ spin_lock_irq(&phba->hbalock);
+ vport->load_flag |= FC_UNLOADING;
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Free the HBA sysfs attributes */
+ lpfc_free_sysfs_attr(vport);
+
+ /* Release all the vports against this physical port */
+ vports = lpfc_create_vport_work_array(phba);
+ if (vports != NULL)
+ for (i = 1; i <= phba->max_vports && vports[i] != NULL; i++)
+ fc_vport_terminate(vports[i]->fc_vport);
+ lpfc_destroy_vport_work_array(phba, vports);
+
+ /* Remove FC host and then SCSI host with the physical port */
+ fc_remove_host(shost);
+ scsi_remove_host(shost);
+
+ /* Perform cleanup on the physical port */
+ lpfc_cleanup(vport);
+
+ /*
+ * Bring down the SLI Layer. This step disables all interrupts,
+ * clears the rings, discards all mailbox commands, and resets
+ * the HBA FCoE function.
+ */
+ lpfc_debugfs_terminate(vport);
+ lpfc_sli4_hba_unset(phba);
+
+ spin_lock_irq(&phba->hbalock);
+ list_del_init(&vport->listentry);
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Call scsi_free before lpfc_sli4_driver_resource_unset since scsi
+ * buffers are released to their corresponding pools here.
+ */
+ lpfc_scsi_free(phba);
+ lpfc_sli4_driver_resource_unset(phba);
+
+ /* Unmap adapter Control and Doorbell registers */
+ lpfc_sli4_pci_mem_unset(phba);
+
+ /* Release PCI resources and disable device's PCI function */
+ scsi_host_put(shost);
+ lpfc_disable_pci_dev(phba);
+
+ /* Finally, free the driver's device data structure */
+ lpfc_hba_free(phba);
+
+ return;
+}
+
+/**
+ * lpfc_pci_suspend_one_s4 - PCI func to suspend SLI-4 device for power mgmnt
+ * @pdev: pointer to PCI device
+ * @msg: power management message
+ *
+ * This routine is called from the kernel's PCI subsystem to support system
+ * Power Management (PM) to device with SLI-4 interface spec. When PM invokes
+ * this method, it quiesces the device by stopping the driver's worker
+ * thread for the device, turning off device's interrupt and DMA, and bring
+ * the device offline. Note that as the driver implements the minimum PM
+ * requirements to a power-aware driver's PM support for suspend/resume -- all
+ * the possible PM messages (SUSPEND, HIBERNATE, FREEZE) to the suspend()
+ * method call will be treated as SUSPEND and the driver will fully
+ * reinitialize its device during resume() method call, the driver will set
+ * device to PCI_D3hot state in PCI config space instead of setting it
+ * according to the @msg provided by the PM.
+ *
+ * Return code
+ * 0 - driver suspended the device
+ * Error otherwise
+ **/
+static int
+lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0298 PCI device Power Management suspend.\n");
+
+ /* Bring down the device */
+ lpfc_offline_prep(phba);
+ lpfc_offline(phba);
+ kthread_stop(phba->worker_thread);
+
+ /* Disable interrupt from device */
+ lpfc_sli4_disable_intr(phba);
+
+ /* Save device state to PCI config space */
+ pci_save_state(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
+}
+
+/**
+ * lpfc_pci_resume_one_s4 - PCI func to resume SLI-4 device for power mgmnt
+ * @pdev: pointer to PCI device
+ *
+ * This routine is called from the kernel's PCI subsystem to support system
+ * Power Management (PM) to device with SLI-4 interface spac. When PM invokes
+ * this method, it restores the device's PCI config space state and fully
+ * reinitializes the device and brings it online. Note that as the driver
+ * implements the minimum PM requirements to a power-aware driver's PM for
+ * suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE)
+ * to the suspend() method call will be treated as SUSPEND and the driver
+ * will fully reinitialize its device during resume() method call, the device
+ * will be set to PCI_D0 directly in PCI config space before restoring the
+ * state.
+ *
+ * Return code
+ * 0 - driver suspended the device
+ * Error otherwise
+ **/
+static int
+lpfc_pci_resume_one_s4(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ uint32_t intr_mode;
+ int error;
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0292 PCI device Power Management resume.\n");
+
+ /* Restore device state from PCI config space */
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ if (pdev->is_busmaster)
+ pci_set_master(pdev);
+
+ /* Startup the kernel thread for this host adapter. */
+ phba->worker_thread = kthread_run(lpfc_do_work, phba,
+ "lpfc_worker_%d", phba->brd_no);
+ if (IS_ERR(phba->worker_thread)) {
+ error = PTR_ERR(phba->worker_thread);
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0293 PM resume failed to start worker "
+ "thread: error=x%x.\n", error);
+ return error;
+ }
+
+ /* Configure and enable interrupt */
+ intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode);
+ if (intr_mode == LPFC_INTR_ERROR) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0294 PM resume Failed to enable interrupt\n");
+ return -EIO;
+ } else
+ phba->intr_mode = intr_mode;
+
+ /* Restart HBA and bring it online */
+ lpfc_sli_brdrestart(phba);
lpfc_online(phba);
+
+ /* Log the current active interrupt mode */
+ lpfc_log_intr_mode(phba, phba->intr_mode);
+
+ return 0;
+}
+
+/**
+ * lpfc_io_error_detected_s4 - Method for handling PCI I/O error to SLI-4 device
+ * @pdev: pointer to PCI device.
+ * @state: the current PCI connection state.
+ *
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-4 interface spec. This function is called by the PCI subsystem
+ * after a PCI bus error affecting this device has been detected. When this
+ * function is invoked, it will need to stop all the I/Os and interrupt(s)
+ * to the device. Once that is done, it will return PCI_ERS_RESULT_NEED_RESET
+ * for the PCI subsystem to perform proper recovery as desired.
+ *
+ * Return codes
+ * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
+ * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ **/
+static pci_ers_result_t
+lpfc_io_error_detected_s4(struct pci_dev *pdev, pci_channel_state_t state)
+{
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * lpfc_io_slot_reset_s4 - Method for restart PCI SLI-4 device from scratch
+ * @pdev: pointer to PCI device.
+ *
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-4 interface spec. It is called after PCI bus has been reset to
+ * restart the PCI card from scratch, as if from a cold-boot. During the
+ * PCI subsystem error recovery, after the driver returns
+ * PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error
+ * recovery and then call this routine before calling the .resume method to
+ * recover the device. This function will initialize the HBA device, enable
+ * the interrupt, but it will just put the HBA to offline state without
+ * passing any I/O traffic.
+ *
+ * Return codes
+ * PCI_ERS_RESULT_RECOVERED - the device has been recovered
+ * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ */
+static pci_ers_result_t
+lpfc_io_slot_reset_s4(struct pci_dev *pdev)
+{
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * lpfc_io_resume_s4 - Method for resuming PCI I/O operation to SLI-4 device
+ * @pdev: pointer to PCI device
+ *
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-4 interface spec. It is called when kernel error recovery tells
+ * the lpfc driver that it is ok to resume normal PCI operation after PCI bus
+ * error recovery. After this call, traffic can start to flow from this device
+ * again.
+ **/
+static void
+lpfc_io_resume_s4(struct pci_dev *pdev)
+{
+ return;
+}
+
+/**
+ * lpfc_pci_probe_one - lpfc PCI probe func to reg dev to PCI subsystem
+ * @pdev: pointer to PCI device
+ * @pid: pointer to PCI device identifier
+ *
+ * This routine is to be registered to the kernel's PCI subsystem. When an
+ * Emulex HBA device is presented on PCI bus, the kernel PCI subsystem looks
+ * at PCI device-specific information of the device and driver to see if the
+ * driver state that it can support this kind of device. If the match is
+ * successful, the driver core invokes this routine. This routine dispatches
+ * the action to the proper SLI-3 or SLI-4 device probing routine, which will
+ * do all the initialization that it needs to do to handle the HBA device
+ * properly.
+ *
+ * Return code
+ * 0 - driver can claim the device
+ * negative value - driver can not claim the device
+ **/
+static int __devinit
+lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+ int rc;
+ uint16_t dev_id;
+
+ if (pci_read_config_word(pdev, PCI_DEVICE_ID, &dev_id))
+ return -ENODEV;
+
+ switch (dev_id) {
+ case PCI_DEVICE_ID_TIGERSHARK:
+ case PCI_DEVICE_ID_TIGERSHARK_S:
+ rc = lpfc_pci_probe_one_s4(pdev, pid);
+ break;
+ default:
+ rc = lpfc_pci_probe_one_s3(pdev, pid);
+ break;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_pci_remove_one - lpfc PCI func to unreg dev from PCI subsystem
+ * @pdev: pointer to PCI device
+ *
+ * This routine is to be registered to the kernel's PCI subsystem. When an
+ * Emulex HBA is removed from PCI bus, the driver core invokes this routine.
+ * This routine dispatches the action to the proper SLI-3 or SLI-4 device
+ * remove routine, which will perform all the necessary cleanup for the
+ * device to be removed from the PCI subsystem properly.
+ **/
+static void __devexit
+lpfc_pci_remove_one(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+ switch (phba->pci_dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ lpfc_pci_remove_one_s3(pdev);
+ break;
+ case LPFC_PCI_DEV_OC:
+ lpfc_pci_remove_one_s4(pdev);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1424 Invalid PCI device group: 0x%x\n",
+ phba->pci_dev_grp);
+ break;
+ }
+ return;
+}
+
+/**
+ * lpfc_pci_suspend_one - lpfc PCI func to suspend dev for power management
+ * @pdev: pointer to PCI device
+ * @msg: power management message
+ *
+ * This routine is to be registered to the kernel's PCI subsystem to support
+ * system Power Management (PM). When PM invokes this method, it dispatches
+ * the action to the proper SLI-3 or SLI-4 device suspend routine, which will
+ * suspend the device.
+ *
+ * Return code
+ * 0 - driver suspended the device
+ * Error otherwise
+ **/
+static int
+lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ int rc = -ENODEV;
+
+ switch (phba->pci_dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ rc = lpfc_pci_suspend_one_s3(pdev, msg);
+ break;
+ case LPFC_PCI_DEV_OC:
+ rc = lpfc_pci_suspend_one_s4(pdev, msg);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1425 Invalid PCI device group: 0x%x\n",
+ phba->pci_dev_grp);
+ break;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_pci_resume_one - lpfc PCI func to resume dev for power management
+ * @pdev: pointer to PCI device
+ *
+ * This routine is to be registered to the kernel's PCI subsystem to support
+ * system Power Management (PM). When PM invokes this method, it dispatches
+ * the action to the proper SLI-3 or SLI-4 device resume routine, which will
+ * resume the device.
+ *
+ * Return code
+ * 0 - driver suspended the device
+ * Error otherwise
+ **/
+static int
+lpfc_pci_resume_one(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ int rc = -ENODEV;
+
+ switch (phba->pci_dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ rc = lpfc_pci_resume_one_s3(pdev);
+ break;
+ case LPFC_PCI_DEV_OC:
+ rc = lpfc_pci_resume_one_s4(pdev);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1426 Invalid PCI device group: 0x%x\n",
+ phba->pci_dev_grp);
+ break;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_io_error_detected - lpfc method for handling PCI I/O error
+ * @pdev: pointer to PCI device.
+ * @state: the current PCI connection state.
+ *
+ * This routine is registered to the PCI subsystem for error handling. This
+ * function is called by the PCI subsystem after a PCI bus error affecting
+ * this device has been detected. When this routine is invoked, it dispatches
+ * the action to the proper SLI-3 or SLI-4 device error detected handling
+ * routine, which will perform the proper error detected operation.
+ *
+ * Return codes
+ * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
+ * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ **/
+static pci_ers_result_t
+lpfc_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
+
+ switch (phba->pci_dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ rc = lpfc_io_error_detected_s3(pdev, state);
+ break;
+ case LPFC_PCI_DEV_OC:
+ rc = lpfc_io_error_detected_s4(pdev, state);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1427 Invalid PCI device group: 0x%x\n",
+ phba->pci_dev_grp);
+ break;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_io_slot_reset - lpfc method for restart PCI dev from scratch
+ * @pdev: pointer to PCI device.
+ *
+ * This routine is registered to the PCI subsystem for error handling. This
+ * function is called after PCI bus has been reset to restart the PCI card
+ * from scratch, as if from a cold-boot. When this routine is invoked, it
+ * dispatches the action to the proper SLI-3 or SLI-4 device reset handling
+ * routine, which will perform the proper device reset.
+ *
+ * Return codes
+ * PCI_ERS_RESULT_RECOVERED - the device has been recovered
+ * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ **/
+static pci_ers_result_t
+lpfc_io_slot_reset(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
+
+ switch (phba->pci_dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ rc = lpfc_io_slot_reset_s3(pdev);
+ break;
+ case LPFC_PCI_DEV_OC:
+ rc = lpfc_io_slot_reset_s4(pdev);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1428 Invalid PCI device group: 0x%x\n",
+ phba->pci_dev_grp);
+ break;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_io_resume - lpfc method for resuming PCI I/O operation
+ * @pdev: pointer to PCI device
+ *
+ * This routine is registered to the PCI subsystem for error handling. It
+ * is called when kernel error recovery tells the lpfc driver that it is
+ * OK to resume normal PCI operation after PCI bus error recovery. When
+ * this routine is invoked, it dispatches the action to the proper SLI-3
+ * or SLI-4 device io_resume routine, which will resume the device operation.
+ **/
+static void
+lpfc_io_resume(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+ switch (phba->pci_dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ lpfc_io_resume_s3(pdev);
+ break;
+ case LPFC_PCI_DEV_OC:
+ lpfc_io_resume_s4(pdev);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1429 Invalid PCI device group: 0x%x\n",
+ phba->pci_dev_grp);
+ break;
+ }
+ return;
}
static struct pci_device_id lpfc_id_table[] = {
@@ -3469,6 +7939,10 @@ static struct pci_device_id lpfc_id_table[] = {
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_S,
PCI_ANY_ID, PCI_ANY_ID, },
+ {PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TIGERSHARK,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ {PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TIGERSHARK_S,
+ PCI_ANY_ID, PCI_ANY_ID, },
{ 0 }
};
@@ -3486,7 +7960,7 @@ static struct pci_driver lpfc_driver = {
.probe = lpfc_pci_probe_one,
.remove = __devexit_p(lpfc_pci_remove_one),
.suspend = lpfc_pci_suspend_one,
- .resume = lpfc_pci_resume_one,
+ .resume = lpfc_pci_resume_one,
.err_handler = &lpfc_err_handler,
};
diff --git a/drivers/scsi/lpfc/lpfc_logmsg.h b/drivers/scsi/lpfc/lpfc_logmsg.h
index 1aa8570..954ba57 100644
--- a/drivers/scsi/lpfc/lpfc_logmsg.h
+++ b/drivers/scsi/lpfc/lpfc_logmsg.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -18,33 +18,39 @@
* included with this package. *
*******************************************************************/
-#define LOG_ELS 0x1 /* ELS events */
-#define LOG_DISCOVERY 0x2 /* Link discovery events */
-#define LOG_MBOX 0x4 /* Mailbox events */
-#define LOG_INIT 0x8 /* Initialization events */
-#define LOG_LINK_EVENT 0x10 /* Link events */
-#define LOG_IP 0x20 /* IP traffic history */
-#define LOG_FCP 0x40 /* FCP traffic history */
-#define LOG_NODE 0x80 /* Node table events */
-#define LOG_TEMP 0x100 /* Temperature sensor events */
-#define LOG_BG 0x200 /* BlockGuard events */
-#define LOG_MISC 0x400 /* Miscellaneous events */
-#define LOG_SLI 0x800 /* SLI events */
-#define LOG_FCP_ERROR 0x1000 /* log errors, not underruns */
-#define LOG_LIBDFC 0x2000 /* Libdfc events */
-#define LOG_VPORT 0x4000 /* NPIV events */
-#define LOG_ALL_MSG 0xffff /* LOG all messages */
+#define LOG_ELS 0x00000001 /* ELS events */
+#define LOG_DISCOVERY 0x00000002 /* Link discovery events */
+#define LOG_MBOX 0x00000004 /* Mailbox events */
+#define LOG_INIT 0x00000008 /* Initialization events */
+#define LOG_LINK_EVENT 0x00000010 /* Link events */
+#define LOG_IP 0x00000020 /* IP traffic history */
+#define LOG_FCP 0x00000040 /* FCP traffic history */
+#define LOG_NODE 0x00000080 /* Node table events */
+#define LOG_TEMP 0x00000100 /* Temperature sensor events */
+#define LOG_BG 0x00000200 /* BlockGuard events */
+#define LOG_MISC 0x00000400 /* Miscellaneous events */
+#define LOG_SLI 0x00000800 /* SLI events */
+#define LOG_FCP_ERROR 0x00001000 /* log errors, not underruns */
+#define LOG_LIBDFC 0x00002000 /* Libdfc events */
+#define LOG_VPORT 0x00004000 /* NPIV events */
+#define LOF_SECURITY 0x00008000 /* Security events */
+#define LOG_EVENT 0x00010000 /* CT,TEMP,DUMP, logging */
+#define LOG_ALL_MSG 0xffffffff /* LOG all messages */
#define lpfc_printf_vlog(vport, level, mask, fmt, arg...) \
- do { \
- { if (((mask) &(vport)->cfg_log_verbose) || (level[1] <= '3')) \
+do { \
+ { if (((mask) & (vport)->cfg_log_verbose) || (level[1] <= '3')) \
dev_printk(level, &((vport)->phba->pcidev)->dev, "%d:(%d):" \
fmt, (vport)->phba->brd_no, vport->vpi, ##arg); } \
- } while (0)
+} while (0)
#define lpfc_printf_log(phba, level, mask, fmt, arg...) \
- do { \
- { if (((mask) &(phba)->pport->cfg_log_verbose) || (level[1] <= '3')) \
+do { \
+ { uint32_t log_verbose = (phba)->pport ? \
+ (phba)->pport->cfg_log_verbose : \
+ (phba)->cfg_log_verbose; \
+ if (((mask) & log_verbose) || (level[1] <= '3')) \
dev_printk(level, &((phba)->pcidev)->dev, "%d:" \
- fmt, phba->brd_no, ##arg); } \
- } while (0)
+ fmt, phba->brd_no, ##arg); \
+ } \
+} while (0)
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 134fc7f..b9b451c 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -28,8 +28,10 @@
#include <scsi/scsi.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -39,6 +41,44 @@
#include "lpfc_compat.h"
/**
+ * lpfc_dump_static_vport - Dump HBA's static vport information.
+ * @phba: pointer to lpfc hba data structure.
+ * @pmb: pointer to the driver internal queue element for mailbox command.
+ * @offset: offset for dumping vport info.
+ *
+ * The dump mailbox command provides a method for the device driver to obtain
+ * various types of information from the HBA device.
+ *
+ * This routine prepares the mailbox command for dumping list of static
+ * vports to be created.
+ **/
+void
+lpfc_dump_static_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb,
+ uint16_t offset)
+{
+ MAILBOX_t *mb;
+ void *ctx;
+
+ mb = &pmb->u.mb;
+ ctx = pmb->context2;
+
+ /* Setup to dump vport info region */
+ memset(pmb, 0, sizeof(LPFC_MBOXQ_t));
+ mb->mbxCommand = MBX_DUMP_MEMORY;
+ mb->un.varDmp.cv = 1;
+ mb->un.varDmp.type = DMP_NV_PARAMS;
+ mb->un.varDmp.entry_index = offset;
+ mb->un.varDmp.region_id = DMP_REGION_VPORT;
+ mb->un.varDmp.word_cnt = DMP_RSP_SIZE/sizeof(uint32_t);
+ mb->un.varDmp.co = 0;
+ mb->un.varDmp.resp_offset = 0;
+ pmb->context2 = ctx;
+ mb->mbxOwner = OWN_HOST;
+
+ return;
+}
+
+/**
* lpfc_dump_mem - Prepare a mailbox command for retrieving HBA's VPD memory
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
@@ -58,7 +98,7 @@ lpfc_dump_mem(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint16_t offset)
MAILBOX_t *mb;
void *ctx;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
ctx = pmb->context2;
/* Setup to dump VPD region */
@@ -90,7 +130,7 @@ lpfc_dump_wakeup_param(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
MAILBOX_t *mb;
void *ctx;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
/* Save context so that we can restore after memset */
ctx = pmb->context2;
@@ -125,7 +165,7 @@ lpfc_read_nv(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
{
MAILBOX_t *mb;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->mbxCommand = MBX_READ_NV;
mb->mbxOwner = OWN_HOST;
@@ -151,7 +191,7 @@ lpfc_config_async(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb,
{
MAILBOX_t *mb;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->mbxCommand = MBX_ASYNCEVT_ENABLE;
mb->un.varCfgAsyncEvent.ring = ring;
@@ -177,7 +217,7 @@ lpfc_heart_beat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
{
MAILBOX_t *mb;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->mbxCommand = MBX_HEARTBEAT;
mb->mbxOwner = OWN_HOST;
@@ -211,7 +251,7 @@ lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, struct lpfc_dmabuf *mp)
struct lpfc_sli *psli;
psli = &phba->sli;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
INIT_LIST_HEAD(&mp->list);
@@ -248,7 +288,7 @@ lpfc_clear_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
{
MAILBOX_t *mb;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->un.varClearLA.eventTag = phba->fc_eventTag;
@@ -275,7 +315,7 @@ void
lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
{
struct lpfc_vport *vport = phba->pport;
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
/* NEW_FEATURE
@@ -321,7 +361,7 @@ lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
int
lpfc_config_msi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
uint32_t attentionConditions[2];
/* Sanity check */
@@ -405,7 +445,7 @@ lpfc_init_link(struct lpfc_hba * phba,
struct lpfc_sli *psli;
MAILBOX_t *mb;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
psli = &phba->sli;
@@ -492,7 +532,7 @@ lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi)
struct lpfc_sli *psli;
psli = &phba->sli;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->mbxOwner = OWN_HOST;
@@ -515,7 +555,7 @@ lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi)
mb->un.varRdSparm.un.sp64.tus.f.bdeSize = sizeof (struct serv_parm);
mb->un.varRdSparm.un.sp64.addrHigh = putPaddrHigh(mp->phys);
mb->un.varRdSparm.un.sp64.addrLow = putPaddrLow(mp->phys);
- mb->un.varRdSparm.vpi = vpi;
+ mb->un.varRdSparm.vpi = vpi + phba->vpi_base;
/* save address for completion */
pmb->context1 = mp;
@@ -544,10 +584,12 @@ lpfc_unreg_did(struct lpfc_hba * phba, uint16_t vpi, uint32_t did,
{
MAILBOX_t *mb;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->un.varUnregDID.did = did;
+ if (vpi != 0xffff)
+ vpi += phba->vpi_base;
mb->un.varUnregDID.vpi = vpi;
mb->mbxCommand = MBX_UNREG_D_ID;
@@ -573,7 +615,7 @@ lpfc_read_config(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
{
MAILBOX_t *mb;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->mbxCommand = MBX_READ_CONFIG;
@@ -598,7 +640,7 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
{
MAILBOX_t *mb;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->mbxCommand = MBX_READ_LNK_STAT;
@@ -607,7 +649,7 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
}
/**
- * lpfc_reg_login - Prepare a mailbox command for registering remote login
+ * lpfc_reg_rpi - Prepare a mailbox command for registering remote login
* @phba: pointer to lpfc hba data structure.
* @vpi: virtual N_Port identifier.
* @did: remote port identifier.
@@ -631,17 +673,23 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
* 1 - DMA memory allocation failed
**/
int
-lpfc_reg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t did,
+lpfc_reg_rpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t did,
uint8_t *param, LPFC_MBOXQ_t *pmb, uint32_t flag)
{
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
uint8_t *sparam;
struct lpfc_dmabuf *mp;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->un.varRegLogin.rpi = 0;
- mb->un.varRegLogin.vpi = vpi;
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ mb->un.varRegLogin.rpi = lpfc_sli4_alloc_rpi(phba);
+ if (mb->un.varRegLogin.rpi == LPFC_RPI_ALLOC_ERROR)
+ return 1;
+ }
+
+ mb->un.varRegLogin.vpi = vpi + phba->vpi_base;
mb->un.varRegLogin.did = did;
mb->un.varWords[30] = flag; /* Set flag to issue action on cmpl */
@@ -697,15 +745,16 @@ lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi,
{
MAILBOX_t *mb;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->un.varUnregLogin.rpi = (uint16_t) rpi;
mb->un.varUnregLogin.rsvd1 = 0;
- mb->un.varUnregLogin.vpi = vpi;
+ mb->un.varUnregLogin.vpi = vpi + phba->vpi_base;
mb->mbxCommand = MBX_UNREG_LOGIN;
mb->mbxOwner = OWN_HOST;
+
return;
}
@@ -725,15 +774,15 @@ lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi,
* This routine prepares the mailbox command for registering a virtual N_Port.
**/
void
-lpfc_reg_vpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t sid,
- LPFC_MBOXQ_t *pmb)
+lpfc_reg_vpi(struct lpfc_vport *vport, LPFC_MBOXQ_t *pmb)
{
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
- mb->un.varRegVpi.vpi = vpi;
- mb->un.varRegVpi.sid = sid;
+ mb->un.varRegVpi.vpi = vport->vpi + vport->phba->vpi_base;
+ mb->un.varRegVpi.sid = vport->fc_myDID;
+ mb->un.varRegVpi.vfi = vport->vfi + vport->phba->vfi_base;
mb->mbxCommand = MBX_REG_VPI;
mb->mbxOwner = OWN_HOST;
@@ -760,10 +809,10 @@ lpfc_reg_vpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t sid,
void
lpfc_unreg_vpi(struct lpfc_hba *phba, uint16_t vpi, LPFC_MBOXQ_t *pmb)
{
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
- mb->un.varUnregVpi.vpi = vpi;
+ mb->un.varUnregVpi.vpi = vpi + phba->vpi_base;
mb->mbxCommand = MBX_UNREG_VPI;
mb->mbxOwner = OWN_HOST;
@@ -852,7 +901,7 @@ lpfc_config_pcb_setup(struct lpfc_hba * phba)
void
lpfc_read_rev(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
{
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->un.varRdRev.cv = 1;
mb->un.varRdRev.v3req = 1; /* Request SLI3 info */
@@ -945,7 +994,7 @@ lpfc_config_hbq(struct lpfc_hba *phba, uint32_t id,
uint32_t hbq_entry_index, LPFC_MBOXQ_t *pmb)
{
int i;
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
struct config_hbq_var *hbqmb = &mb->un.varCfgHbq;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
@@ -1020,7 +1069,7 @@ void
lpfc_config_ring(struct lpfc_hba * phba, int ring, LPFC_MBOXQ_t * pmb)
{
int i;
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
struct lpfc_sli *psli;
struct lpfc_sli_ring *pring;
@@ -1075,7 +1124,7 @@ void
lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
MAILBOX_t __iomem *mb_slim = (MAILBOX_t __iomem *) phba->MBslimaddr;
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
dma_addr_t pdma_addr;
uint32_t bar_low, bar_high;
size_t offset;
@@ -1099,21 +1148,22 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
/* If HBA supports SLI=3 ask for it */
- if (phba->sli_rev == 3 && phba->vpd.sli3Feat.cerbm) {
+ if (phba->sli_rev == LPFC_SLI_REV3 && phba->vpd.sli3Feat.cerbm) {
if (phba->cfg_enable_bg)
mb->un.varCfgPort.cbg = 1; /* configure BlockGuard */
+ mb->un.varCfgPort.cdss = 1; /* Configure Security */
mb->un.varCfgPort.cerbm = 1; /* Request HBQs */
mb->un.varCfgPort.ccrp = 1; /* Command Ring Polling */
mb->un.varCfgPort.cinb = 1; /* Interrupt Notification Block */
mb->un.varCfgPort.max_hbq = lpfc_sli_hbq_count();
if (phba->max_vpi && phba->cfg_enable_npiv &&
phba->vpd.sli3Feat.cmv) {
- mb->un.varCfgPort.max_vpi = phba->max_vpi;
+ mb->un.varCfgPort.max_vpi = LPFC_MAX_VPI;
mb->un.varCfgPort.cmv = 1;
} else
mb->un.varCfgPort.max_vpi = phba->max_vpi = 0;
} else
- phba->sli_rev = 2;
+ phba->sli_rev = LPFC_SLI_REV2;
mb->un.varCfgPort.sli_mode = phba->sli_rev;
/* Now setup pcb */
@@ -1245,7 +1295,7 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
void
lpfc_kill_board(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
{
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
memset(pmb, 0, sizeof(LPFC_MBOXQ_t));
mb->mbxCommand = MBX_KILL_BOARD;
@@ -1305,29 +1355,98 @@ lpfc_mbox_get(struct lpfc_hba * phba)
}
/**
+ * __lpfc_mbox_cmpl_put - Put mailbox cmd into mailbox cmd complete list
+ * @phba: pointer to lpfc hba data structure.
+ * @mbq: pointer to the driver internal queue element for mailbox command.
+ *
+ * This routine put the completed mailbox command into the mailbox command
+ * complete list. This is the unlocked version of the routine. The mailbox
+ * complete list is used by the driver worker thread to process mailbox
+ * complete callback functions outside the driver interrupt handler.
+ **/
+void
+__lpfc_mbox_cmpl_put(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbq)
+{
+ list_add_tail(&mbq->list, &phba->sli.mboxq_cmpl);
+}
+
+/**
* lpfc_mbox_cmpl_put - Put mailbox command into mailbox command complete list
* @phba: pointer to lpfc hba data structure.
* @mbq: pointer to the driver internal queue element for mailbox command.
*
* This routine put the completed mailbox command into the mailbox command
- * complete list. This routine is called from driver interrupt handler
- * context.The mailbox complete list is used by the driver worker thread
- * to process mailbox complete callback functions outside the driver interrupt
- * handler.
+ * complete list. This is the locked version of the routine. The mailbox
+ * complete list is used by the driver worker thread to process mailbox
+ * complete callback functions outside the driver interrupt handler.
**/
void
-lpfc_mbox_cmpl_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq)
+lpfc_mbox_cmpl_put(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbq)
{
unsigned long iflag;
/* This function expects to be called from interrupt context */
spin_lock_irqsave(&phba->hbalock, iflag);
- list_add_tail(&mbq->list, &phba->sli.mboxq_cmpl);
+ __lpfc_mbox_cmpl_put(phba, mbq);
spin_unlock_irqrestore(&phba->hbalock, iflag);
return;
}
/**
+ * lpfc_mbox_cmd_check - Check the validality of a mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to the driver internal queue element for mailbox command.
+ *
+ * This routine is to check whether a mailbox command is valid to be issued.
+ * This check will be performed by both the mailbox issue API when a client
+ * is to issue a mailbox command to the mailbox transport.
+ *
+ * Return 0 - pass the check, -ENODEV - fail the check
+ **/
+int
+lpfc_mbox_cmd_check(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+ /* Mailbox command that have a completion handler must also have a
+ * vport specified.
+ */
+ if (mboxq->mbox_cmpl && mboxq->mbox_cmpl != lpfc_sli_def_mbox_cmpl &&
+ mboxq->mbox_cmpl != lpfc_sli_wake_mbox_wait) {
+ if (!mboxq->vport) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_VPORT,
+ "1814 Mbox x%x failed, no vport\n",
+ mboxq->u.mb.mbxCommand);
+ dump_stack();
+ return -ENODEV;
+ }
+ }
+ return 0;
+}
+
+/**
+ * lpfc_mbox_dev_check - Check the device state for issuing a mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is to check whether the HBA device is ready for posting a
+ * mailbox command. It is used by the mailbox transport API at the time the
+ * to post a mailbox command to the device.
+ *
+ * Return 0 - pass the check, -ENODEV - fail the check
+ **/
+int
+lpfc_mbox_dev_check(struct lpfc_hba *phba)
+{
+ /* If the PCI channel is in offline state, do not issue mbox */
+ if (unlikely(pci_channel_offline(phba->pcidev)))
+ return -ENODEV;
+
+ /* If the HBA is in error state, do not issue mbox */
+ if (phba->link_state == LPFC_HBA_ERROR)
+ return -ENODEV;
+
+ return 0;
+}
+
+/**
* lpfc_mbox_tmo_val - Retrieve mailbox command timeout value
* @phba: pointer to lpfc hba data structure.
* @cmd: mailbox command code.
@@ -1350,6 +1469,475 @@ lpfc_mbox_tmo_val(struct lpfc_hba *phba, int cmd)
case MBX_WRITE_WWN: /* 0x98 */
case MBX_LOAD_EXP_ROM: /* 0x9C */
return LPFC_MBOX_TMO_FLASH_CMD;
+ case MBX_SLI4_CONFIG: /* 0x9b */
+ return LPFC_MBOX_SLI4_CONFIG_TMO;
}
return LPFC_MBOX_TMO;
}
+
+/**
+ * lpfc_sli4_mbx_sge_set - Set a sge entry in non-embedded mailbox command
+ * @mbox: pointer to lpfc mbox command.
+ * @sgentry: sge entry index.
+ * @phyaddr: physical address for the sge
+ * @length: Length of the sge.
+ *
+ * This routine sets up an entry in the non-embedded mailbox command at the sge
+ * index location.
+ **/
+void
+lpfc_sli4_mbx_sge_set(struct lpfcMboxq *mbox, uint32_t sgentry,
+ dma_addr_t phyaddr, uint32_t length)
+{
+ struct lpfc_mbx_nembed_cmd *nembed_sge;
+
+ nembed_sge = (struct lpfc_mbx_nembed_cmd *)
+ &mbox->u.mqe.un.nembed_cmd;
+ nembed_sge->sge[sgentry].pa_lo = putPaddrLow(phyaddr);
+ nembed_sge->sge[sgentry].pa_hi = putPaddrHigh(phyaddr);
+ nembed_sge->sge[sgentry].length = length;
+}
+
+/**
+ * lpfc_sli4_mbx_sge_get - Get a sge entry from non-embedded mailbox command
+ * @mbox: pointer to lpfc mbox command.
+ * @sgentry: sge entry index.
+ *
+ * This routine gets an entry from the non-embedded mailbox command at the sge
+ * index location.
+ **/
+void
+lpfc_sli4_mbx_sge_get(struct lpfcMboxq *mbox, uint32_t sgentry,
+ struct lpfc_mbx_sge *sge)
+{
+ struct lpfc_mbx_nembed_cmd *nembed_sge;
+
+ nembed_sge = (struct lpfc_mbx_nembed_cmd *)
+ &mbox->u.mqe.un.nembed_cmd;
+ sge->pa_lo = nembed_sge->sge[sgentry].pa_lo;
+ sge->pa_hi = nembed_sge->sge[sgentry].pa_hi;
+ sge->length = nembed_sge->sge[sgentry].length;
+}
+
+/**
+ * lpfc_sli4_mbox_cmd_free - Free a sli4 mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ * @mbox: pointer to lpfc mbox command.
+ *
+ * This routine frees SLI4 specific mailbox command for sending IOCTL command.
+ **/
+void
+lpfc_sli4_mbox_cmd_free(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
+{
+ struct lpfc_mbx_sli4_config *sli4_cfg;
+ struct lpfc_mbx_sge sge;
+ dma_addr_t phyaddr;
+ uint32_t sgecount, sgentry;
+
+ sli4_cfg = &mbox->u.mqe.un.sli4_config;
+
+ /* For embedded mbox command, just free the mbox command */
+ if (bf_get(lpfc_mbox_hdr_emb, &sli4_cfg->header.cfg_mhdr)) {
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return;
+ }
+
+ /* For non-embedded mbox command, we need to free the pages first */
+ sgecount = bf_get(lpfc_mbox_hdr_sge_cnt, &sli4_cfg->header.cfg_mhdr);
+ /* There is nothing we can do if there is no sge address array */
+ if (unlikely(!mbox->sge_array)) {
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return;
+ }
+ /* Each non-embedded DMA memory was allocated in the length of a page */
+ for (sgentry = 0; sgentry < sgecount; sgentry++) {
+ lpfc_sli4_mbx_sge_get(mbox, sgentry, &sge);
+ phyaddr = getPaddr(sge.pa_hi, sge.pa_lo);
+ dma_free_coherent(&phba->pcidev->dev, PAGE_SIZE,
+ mbox->sge_array->addr[sgentry], phyaddr);
+ }
+ /* Free the sge address array memory */
+ kfree(mbox->sge_array);
+ /* Finally, free the mailbox command itself */
+ mempool_free(mbox, phba->mbox_mem_pool);
+}
+
+/**
+ * lpfc_sli4_config - Initialize the SLI4 Config Mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ * @mbox: pointer to lpfc mbox command.
+ * @subsystem: The sli4 config sub mailbox subsystem.
+ * @opcode: The sli4 config sub mailbox command opcode.
+ * @length: Length of the sli4 config mailbox command.
+ *
+ * This routine sets up the header fields of SLI4 specific mailbox command
+ * for sending IOCTL command.
+ *
+ * Return: the actual length of the mbox command allocated (mostly useful
+ * for none embedded mailbox command).
+ **/
+int
+lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox,
+ uint8_t subsystem, uint8_t opcode, uint32_t length, bool emb)
+{
+ struct lpfc_mbx_sli4_config *sli4_config;
+ union lpfc_sli4_cfg_shdr *cfg_shdr = NULL;
+ uint32_t alloc_len;
+ uint32_t resid_len;
+ uint32_t pagen, pcount;
+ void *viraddr;
+ dma_addr_t phyaddr;
+
+ /* Set up SLI4 mailbox command header fields */
+ memset(mbox, 0, sizeof(*mbox));
+ bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_SLI4_CONFIG);
+
+ /* Set up SLI4 ioctl command header fields */
+ sli4_config = &mbox->u.mqe.un.sli4_config;
+
+ /* Setup for the embedded mbox command */
+ if (emb) {
+ /* Set up main header fields */
+ bf_set(lpfc_mbox_hdr_emb, &sli4_config->header.cfg_mhdr, 1);
+ sli4_config->header.cfg_mhdr.payload_length =
+ LPFC_MBX_CMD_HDR_LENGTH + length;
+ /* Set up sub-header fields following main header */
+ bf_set(lpfc_mbox_hdr_opcode,
+ &sli4_config->header.cfg_shdr.request, opcode);
+ bf_set(lpfc_mbox_hdr_subsystem,
+ &sli4_config->header.cfg_shdr.request, subsystem);
+ sli4_config->header.cfg_shdr.request.request_length = length;
+ return length;
+ }
+
+ /* Setup for the none-embedded mbox command */
+ pcount = (PAGE_ALIGN(length))/PAGE_SIZE;
+ pcount = (pcount > LPFC_SLI4_MBX_SGE_MAX_PAGES) ?
+ LPFC_SLI4_MBX_SGE_MAX_PAGES : pcount;
+ /* Allocate record for keeping SGE virtual addresses */
+ mbox->sge_array = kmalloc(sizeof(struct lpfc_mbx_nembed_sge_virt),
+ GFP_KERNEL);
+ if (!mbox->sge_array)
+ return 0;
+
+ for (pagen = 0, alloc_len = 0; pagen < pcount; pagen++) {
+ /* The DMA memory is always allocated in the length of a
+ * page even though the last SGE might not fill up to a
+ * page, this is used as a priori size of PAGE_SIZE for
+ * the later DMA memory free.
+ */
+ viraddr = dma_alloc_coherent(&phba->pcidev->dev, PAGE_SIZE,
+ &phyaddr, GFP_KERNEL);
+ /* In case of malloc fails, proceed with whatever we have */
+ if (!viraddr)
+ break;
+ mbox->sge_array->addr[pagen] = viraddr;
+ /* Keep the first page for later sub-header construction */
+ if (pagen == 0)
+ cfg_shdr = (union lpfc_sli4_cfg_shdr *)viraddr;
+ resid_len = length - alloc_len;
+ if (resid_len > PAGE_SIZE) {
+ lpfc_sli4_mbx_sge_set(mbox, pagen, phyaddr,
+ PAGE_SIZE);
+ alloc_len += PAGE_SIZE;
+ } else {
+ lpfc_sli4_mbx_sge_set(mbox, pagen, phyaddr,
+ resid_len);
+ alloc_len = length;
+ }
+ }
+
+ /* Set up main header fields in mailbox command */
+ sli4_config->header.cfg_mhdr.payload_length = alloc_len;
+ bf_set(lpfc_mbox_hdr_sge_cnt, &sli4_config->header.cfg_mhdr, pagen);
+
+ /* Set up sub-header fields into the first page */
+ if (pagen > 0) {
+ bf_set(lpfc_mbox_hdr_opcode, &cfg_shdr->request, opcode);
+ bf_set(lpfc_mbox_hdr_subsystem, &cfg_shdr->request, subsystem);
+ cfg_shdr->request.request_length =
+ alloc_len - sizeof(union lpfc_sli4_cfg_shdr);
+ }
+ /* The sub-header is in DMA memory, which needs endian converstion */
+ lpfc_sli_pcimem_bcopy(cfg_shdr, cfg_shdr,
+ sizeof(union lpfc_sli4_cfg_shdr));
+
+ return alloc_len;
+}
+
+/**
+ * lpfc_sli4_mbox_opcode_get - Get the opcode from a sli4 mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ * @mbox: pointer to lpfc mbox command.
+ *
+ * This routine gets the opcode from a SLI4 specific mailbox command for
+ * sending IOCTL command. If the mailbox command is not MBX_SLI4_CONFIG
+ * (0x9B) or if the IOCTL sub-header is not present, opcode 0x0 shall be
+ * returned.
+ **/
+uint8_t
+lpfc_sli4_mbox_opcode_get(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
+{
+ struct lpfc_mbx_sli4_config *sli4_cfg;
+ union lpfc_sli4_cfg_shdr *cfg_shdr;
+
+ if (mbox->u.mb.mbxCommand != MBX_SLI4_CONFIG)
+ return 0;
+ sli4_cfg = &mbox->u.mqe.un.sli4_config;
+
+ /* For embedded mbox command, get opcode from embedded sub-header*/
+ if (bf_get(lpfc_mbox_hdr_emb, &sli4_cfg->header.cfg_mhdr)) {
+ cfg_shdr = &mbox->u.mqe.un.sli4_config.header.cfg_shdr;
+ return bf_get(lpfc_mbox_hdr_opcode, &cfg_shdr->request);
+ }
+
+ /* For non-embedded mbox command, get opcode from first dma page */
+ if (unlikely(!mbox->sge_array))
+ return 0;
+ cfg_shdr = (union lpfc_sli4_cfg_shdr *)mbox->sge_array->addr[0];
+ return bf_get(lpfc_mbox_hdr_opcode, &cfg_shdr->request);
+}
+
+/**
+ * lpfc_request_features: Configure SLI4 REQUEST_FEATURES mailbox
+ * @mboxq: pointer to lpfc mbox command.
+ *
+ * This routine sets up the mailbox for an SLI4 REQUEST_FEATURES
+ * mailbox command.
+ **/
+void
+lpfc_request_features(struct lpfc_hba *phba, struct lpfcMboxq *mboxq)
+{
+ /* Set up SLI4 mailbox command header fields */
+ memset(mboxq, 0, sizeof(LPFC_MBOXQ_t));
+ bf_set(lpfc_mqe_command, &mboxq->u.mqe, MBX_SLI4_REQ_FTRS);
+
+ /* Set up host requested features. */
+ bf_set(lpfc_mbx_rq_ftr_rq_fcpi, &mboxq->u.mqe.un.req_ftrs, 1);
+
+ /* Virtual fabrics and FIPs are not supported yet. */
+ bf_set(lpfc_mbx_rq_ftr_rq_ifip, &mboxq->u.mqe.un.req_ftrs, 0);
+
+ /* Enable DIF (block guard) only if configured to do so. */
+ if (phba->cfg_enable_bg)
+ bf_set(lpfc_mbx_rq_ftr_rq_dif, &mboxq->u.mqe.un.req_ftrs, 1);
+
+ /* Enable NPIV only if configured to do so. */
+ if (phba->max_vpi && phba->cfg_enable_npiv)
+ bf_set(lpfc_mbx_rq_ftr_rq_npiv, &mboxq->u.mqe.un.req_ftrs, 1);
+
+ return;
+}
+
+/**
+ * lpfc_init_vfi - Initialize the INIT_VFI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @vport: Vport associated with the VF.
+ *
+ * This routine initializes @mbox to all zeros and then fills in the mailbox
+ * fields from @vport. INIT_VFI configures virtual fabrics identified by VFI
+ * in the context of an FCF. The driver issues this command to setup a VFI
+ * before issuing a FLOGI to login to the VSAN. The driver should also issue a
+ * REG_VFI after a successful VSAN login.
+ **/
+void
+lpfc_init_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport)
+{
+ struct lpfc_mbx_init_vfi *init_vfi;
+
+ memset(mbox, 0, sizeof(*mbox));
+ init_vfi = &mbox->u.mqe.un.init_vfi;
+ bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_INIT_VFI);
+ bf_set(lpfc_init_vfi_vr, init_vfi, 1);
+ bf_set(lpfc_init_vfi_vt, init_vfi, 1);
+ bf_set(lpfc_init_vfi_vfi, init_vfi, vport->vfi + vport->phba->vfi_base);
+ bf_set(lpfc_init_vfi_fcfi, init_vfi, vport->phba->fcf.fcfi);
+}
+
+/**
+ * lpfc_reg_vfi - Initialize the REG_VFI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @vport: vport associated with the VF.
+ * @phys: BDE DMA bus address used to send the service parameters to the HBA.
+ *
+ * This routine initializes @mbox to all zeros and then fills in the mailbox
+ * fields from @vport, and uses @buf as a DMAable buffer to send the vport's
+ * fc service parameters to the HBA for this VFI. REG_VFI configures virtual
+ * fabrics identified by VFI in the context of an FCF.
+ **/
+void
+lpfc_reg_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport, dma_addr_t phys)
+{
+ struct lpfc_mbx_reg_vfi *reg_vfi;
+
+ memset(mbox, 0, sizeof(*mbox));
+ reg_vfi = &mbox->u.mqe.un.reg_vfi;
+ bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_REG_VFI);
+ bf_set(lpfc_reg_vfi_vp, reg_vfi, 1);
+ bf_set(lpfc_reg_vfi_vfi, reg_vfi, vport->vfi + vport->phba->vfi_base);
+ bf_set(lpfc_reg_vfi_fcfi, reg_vfi, vport->phba->fcf.fcfi);
+ bf_set(lpfc_reg_vfi_vpi, reg_vfi, vport->vpi + vport->phba->vpi_base);
+ reg_vfi->bde.addrHigh = putPaddrHigh(phys);
+ reg_vfi->bde.addrLow = putPaddrLow(phys);
+ reg_vfi->bde.tus.f.bdeSize = sizeof(vport->fc_sparam);
+ reg_vfi->bde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ bf_set(lpfc_reg_vfi_nport_id, reg_vfi, vport->fc_myDID);
+}
+
+/**
+ * lpfc_init_vpi - Initialize the INIT_VPI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @vpi: VPI to be initialized.
+ *
+ * The INIT_VPI mailbox command supports virtual N_Ports. The driver uses the
+ * command to activate a virtual N_Port. The HBA assigns a MAC address to use
+ * with the virtual N Port. The SLI Host issues this command before issuing a
+ * FDISC to connect to the Fabric. The SLI Host should issue a REG_VPI after a
+ * successful virtual NPort login.
+ **/
+void
+lpfc_init_vpi(struct lpfcMboxq *mbox, uint16_t vpi)
+{
+ memset(mbox, 0, sizeof(*mbox));
+ bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_INIT_VPI);
+ bf_set(lpfc_init_vpi_vpi, &mbox->u.mqe.un.init_vpi, vpi);
+}
+
+/**
+ * lpfc_unreg_vfi - Initialize the UNREG_VFI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @vfi: VFI to be unregistered.
+ *
+ * The UNREG_VFI mailbox command causes the SLI Host to put a virtual fabric
+ * (logical NPort) into the inactive state. The SLI Host must have logged out
+ * and unregistered all remote N_Ports to abort any activity on the virtual
+ * fabric. The SLI Port posts the mailbox response after marking the virtual
+ * fabric inactive.
+ **/
+void
+lpfc_unreg_vfi(struct lpfcMboxq *mbox, uint16_t vfi)
+{
+ memset(mbox, 0, sizeof(*mbox));
+ bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_UNREG_VFI);
+ bf_set(lpfc_unreg_vfi_vfi, &mbox->u.mqe.un.unreg_vfi, vfi);
+}
+
+/**
+ * lpfc_dump_fcoe_param - Dump config region 23 to get FCoe parameters.
+ * @phba: pointer to the hba structure containing.
+ * @mbox: pointer to lpfc mbox command to initialize.
+ *
+ * This function create a SLI4 dump mailbox command to dump FCoE
+ * parameters stored in region 23.
+ **/
+int
+lpfc_dump_fcoe_param(struct lpfc_hba *phba,
+ struct lpfcMboxq *mbox)
+{
+ struct lpfc_dmabuf *mp = NULL;
+ MAILBOX_t *mb;
+
+ memset(mbox, 0, sizeof(*mbox));
+ mb = &mbox->u.mb;
+
+ mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (mp)
+ mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
+
+ if (!mp || !mp->virt) {
+ kfree(mp);
+ /* dump_fcoe_param failed to allocate memory */
+ lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
+ "2569 lpfc_dump_fcoe_param: memory"
+ " allocation failed \n");
+ return 1;
+ }
+
+ memset(mp->virt, 0, LPFC_BPL_SIZE);
+ INIT_LIST_HEAD(&mp->list);
+
+ /* save address for completion */
+ mbox->context1 = (uint8_t *) mp;
+
+ mb->mbxCommand = MBX_DUMP_MEMORY;
+ mb->un.varDmp.type = DMP_NV_PARAMS;
+ mb->un.varDmp.region_id = DMP_REGION_FCOEPARAM;
+ mb->un.varDmp.sli4_length = DMP_FCOEPARAM_RGN_SIZE;
+ mb->un.varWords[3] = putPaddrLow(mp->phys);
+ mb->un.varWords[4] = putPaddrHigh(mp->phys);
+ return 0;
+}
+
+/**
+ * lpfc_reg_fcfi - Initialize the REG_FCFI mailbox command
+ * @phba: pointer to the hba structure containing the FCF index and RQ ID.
+ * @mbox: pointer to lpfc mbox command to initialize.
+ *
+ * The REG_FCFI mailbox command supports Fibre Channel Forwarders (FCFs). The
+ * SLI Host uses the command to activate an FCF after it has acquired FCF
+ * information via a READ_FCF mailbox command. This mailbox command also is used
+ * to indicate where received unsolicited frames from this FCF will be sent. By
+ * default this routine will set up the FCF to forward all unsolicited frames
+ * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * more complicated setups.
+ **/
+void
+lpfc_reg_fcfi(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
+{
+ struct lpfc_mbx_reg_fcfi *reg_fcfi;
+
+ memset(mbox, 0, sizeof(*mbox));
+ reg_fcfi = &mbox->u.mqe.un.reg_fcfi;
+ bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_REG_FCFI);
+ bf_set(lpfc_reg_fcfi_rq_id0, reg_fcfi, phba->sli4_hba.hdr_rq->queue_id);
+ bf_set(lpfc_reg_fcfi_rq_id1, reg_fcfi, REG_FCF_INVALID_QID);
+ bf_set(lpfc_reg_fcfi_rq_id2, reg_fcfi, REG_FCF_INVALID_QID);
+ bf_set(lpfc_reg_fcfi_rq_id3, reg_fcfi, REG_FCF_INVALID_QID);
+ bf_set(lpfc_reg_fcfi_info_index, reg_fcfi, phba->fcf.fcf_indx);
+ /* reg_fcf addr mode is bit wise inverted value of fcf addr_mode */
+ bf_set(lpfc_reg_fcfi_mam, reg_fcfi,
+ (~phba->fcf.addr_mode) & 0x3);
+ if (phba->fcf.fcf_flag & FCF_VALID_VLAN) {
+ bf_set(lpfc_reg_fcfi_vv, reg_fcfi, 1);
+ bf_set(lpfc_reg_fcfi_vlan_tag, reg_fcfi, phba->fcf.vlan_id);
+ }
+}
+
+/**
+ * lpfc_unreg_fcfi - Initialize the UNREG_FCFI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @fcfi: FCFI to be unregistered.
+ *
+ * The UNREG_FCFI mailbox command supports Fibre Channel Forwarders (FCFs).
+ * The SLI Host uses the command to inactivate an FCFI.
+ **/
+void
+lpfc_unreg_fcfi(struct lpfcMboxq *mbox, uint16_t fcfi)
+{
+ memset(mbox, 0, sizeof(*mbox));
+ bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_UNREG_FCFI);
+ bf_set(lpfc_unreg_fcfi, &mbox->u.mqe.un.unreg_fcfi, fcfi);
+}
+
+/**
+ * lpfc_resume_rpi - Initialize the RESUME_RPI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @ndlp: The nodelist structure that describes the RPI to resume.
+ *
+ * The RESUME_RPI mailbox command is used to restart I/O to an RPI after a
+ * link event.
+ **/
+void
+lpfc_resume_rpi(struct lpfcMboxq *mbox, struct lpfc_nodelist *ndlp)
+{
+ struct lpfc_mbx_resume_rpi *resume_rpi;
+
+ memset(mbox, 0, sizeof(*mbox));
+ resume_rpi = &mbox->u.mqe.un.resume_rpi;
+ bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_RESUME_RPI);
+ bf_set(lpfc_resume_rpi_rpi, resume_rpi, ndlp->nlp_rpi);
+ bf_set(lpfc_resume_rpi_vpi, resume_rpi,
+ ndlp->vport->vpi + ndlp->vport->phba->vpi_base);
+ bf_set(lpfc_resume_rpi_vfi, resume_rpi,
+ ndlp->vport->vfi + ndlp->vport->phba->vfi_base);
+}
diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index 35a9767..e198c91 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -28,8 +28,10 @@
#include <scsi/scsi.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -45,7 +47,7 @@
* @phba: HBA to allocate pools for
*
* Description: Creates and allocates PCI pools lpfc_scsi_dma_buf_pool,
- * lpfc_mbuf_pool, lpfc_hbq_pool. Creates and allocates kmalloc-backed mempools
+ * lpfc_mbuf_pool, lpfc_hrb_pool. Creates and allocates kmalloc-backed mempools
* for LPFC_MBOXQ_t and lpfc_nodelist. Also allocates the VPI bitmask.
*
* Notes: Not interrupt-safe. Must be called with no locks held. If any
@@ -56,19 +58,30 @@
* -ENOMEM on failure (if any memory allocations fail)
**/
int
-lpfc_mem_alloc(struct lpfc_hba * phba)
+lpfc_mem_alloc(struct lpfc_hba *phba, int align)
{
struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
int longs;
int i;
- phba->lpfc_scsi_dma_buf_pool = pci_pool_create("lpfc_scsi_dma_buf_pool",
- phba->pcidev, phba->cfg_sg_dma_buf_size, 8, 0);
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ phba->lpfc_scsi_dma_buf_pool =
+ pci_pool_create("lpfc_scsi_dma_buf_pool",
+ phba->pcidev,
+ phba->cfg_sg_dma_buf_size,
+ phba->cfg_sg_dma_buf_size,
+ 0);
+ else
+ phba->lpfc_scsi_dma_buf_pool =
+ pci_pool_create("lpfc_scsi_dma_buf_pool",
+ phba->pcidev, phba->cfg_sg_dma_buf_size,
+ align, 0);
if (!phba->lpfc_scsi_dma_buf_pool)
goto fail;
phba->lpfc_mbuf_pool = pci_pool_create("lpfc_mbuf_pool", phba->pcidev,
- LPFC_BPL_SIZE, 8,0);
+ LPFC_BPL_SIZE,
+ align, 0);
if (!phba->lpfc_mbuf_pool)
goto fail_free_dma_buf_pool;
@@ -97,23 +110,31 @@ lpfc_mem_alloc(struct lpfc_hba * phba)
sizeof(struct lpfc_nodelist));
if (!phba->nlp_mem_pool)
goto fail_free_mbox_pool;
-
- phba->lpfc_hbq_pool = pci_pool_create("lpfc_hbq_pool",phba->pcidev,
- LPFC_BPL_SIZE, 8, 0);
- if (!phba->lpfc_hbq_pool)
+ phba->lpfc_hrb_pool = pci_pool_create("lpfc_hrb_pool",
+ phba->pcidev,
+ LPFC_HDR_BUF_SIZE, align, 0);
+ if (!phba->lpfc_hrb_pool)
goto fail_free_nlp_mem_pool;
+ phba->lpfc_drb_pool = pci_pool_create("lpfc_drb_pool",
+ phba->pcidev,
+ LPFC_DATA_BUF_SIZE, align, 0);
+ if (!phba->lpfc_drb_pool)
+ goto fail_free_hbq_pool;
/* vpi zero is reserved for the physical port so add 1 to max */
longs = ((phba->max_vpi + 1) + BITS_PER_LONG - 1) / BITS_PER_LONG;
phba->vpi_bmask = kzalloc(longs * sizeof(unsigned long), GFP_KERNEL);
if (!phba->vpi_bmask)
- goto fail_free_hbq_pool;
+ goto fail_free_dbq_pool;
return 0;
+ fail_free_dbq_pool:
+ pci_pool_destroy(phba->lpfc_drb_pool);
+ phba->lpfc_drb_pool = NULL;
fail_free_hbq_pool:
- lpfc_sli_hbqbuf_free_all(phba);
- pci_pool_destroy(phba->lpfc_hbq_pool);
+ pci_pool_destroy(phba->lpfc_hrb_pool);
+ phba->lpfc_hrb_pool = NULL;
fail_free_nlp_mem_pool:
mempool_destroy(phba->nlp_mem_pool);
phba->nlp_mem_pool = NULL;
@@ -136,27 +157,73 @@ lpfc_mem_alloc(struct lpfc_hba * phba)
}
/**
- * lpfc_mem_free - Frees all PCI and memory allocated by lpfc_mem_alloc
+ * lpfc_mem_free - Frees memory allocated by lpfc_mem_alloc
* @phba: HBA to free memory for
*
- * Description: Frees PCI pools lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool,
- * lpfc_hbq_pool. Frees kmalloc-backed mempools for LPFC_MBOXQ_t and
- * lpfc_nodelist. Also frees the VPI bitmask
+ * Description: Free the memory allocated by lpfc_mem_alloc routine. This
+ * routine is a the counterpart of lpfc_mem_alloc.
*
* Returns: None
**/
void
-lpfc_mem_free(struct lpfc_hba * phba)
+lpfc_mem_free(struct lpfc_hba *phba)
{
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
- LPFC_MBOXQ_t *mbox, *next_mbox;
- struct lpfc_dmabuf *mp;
int i;
+ struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
+ /* Free VPI bitmask memory */
kfree(phba->vpi_bmask);
+
+ /* Free HBQ pools */
lpfc_sli_hbqbuf_free_all(phba);
+ pci_pool_destroy(phba->lpfc_drb_pool);
+ phba->lpfc_drb_pool = NULL;
+ pci_pool_destroy(phba->lpfc_hrb_pool);
+ phba->lpfc_hrb_pool = NULL;
+
+ /* Free NLP memory pool */
+ mempool_destroy(phba->nlp_mem_pool);
+ phba->nlp_mem_pool = NULL;
+
+ /* Free mbox memory pool */
+ mempool_destroy(phba->mbox_mem_pool);
+ phba->mbox_mem_pool = NULL;
+
+ /* Free MBUF memory pool */
+ for (i = 0; i < pool->current_count; i++)
+ pci_pool_free(phba->lpfc_mbuf_pool, pool->elements[i].virt,
+ pool->elements[i].phys);
+ kfree(pool->elements);
+
+ pci_pool_destroy(phba->lpfc_mbuf_pool);
+ phba->lpfc_mbuf_pool = NULL;
+ /* Free DMA buffer memory pool */
+ pci_pool_destroy(phba->lpfc_scsi_dma_buf_pool);
+ phba->lpfc_scsi_dma_buf_pool = NULL;
+
+ return;
+}
+
+/**
+ * lpfc_mem_free_all - Frees all PCI and driver memory
+ * @phba: HBA to free memory for
+ *
+ * Description: Free memory from PCI and driver memory pools and also those
+ * used : lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool, lpfc_hrb_pool. Frees
+ * kmalloc-backed mempools for LPFC_MBOXQ_t and lpfc_nodelist. Also frees
+ * the VPI bitmask.
+ *
+ * Returns: None
+ **/
+void
+lpfc_mem_free_all(struct lpfc_hba *phba)
+{
+ struct lpfc_sli *psli = &phba->sli;
+ LPFC_MBOXQ_t *mbox, *next_mbox;
+ struct lpfc_dmabuf *mp;
+
+ /* Free memory used in mailbox queue back to mailbox memory pool */
list_for_each_entry_safe(mbox, next_mbox, &psli->mboxq, list) {
mp = (struct lpfc_dmabuf *) (mbox->context1);
if (mp) {
@@ -166,6 +233,7 @@ lpfc_mem_free(struct lpfc_hba * phba)
list_del(&mbox->list);
mempool_free(mbox, phba->mbox_mem_pool);
}
+ /* Free memory used in mailbox cmpl list back to mailbox memory pool */
list_for_each_entry_safe(mbox, next_mbox, &psli->mboxq_cmpl, list) {
mp = (struct lpfc_dmabuf *) (mbox->context1);
if (mp) {
@@ -175,8 +243,10 @@ lpfc_mem_free(struct lpfc_hba * phba)
list_del(&mbox->list);
mempool_free(mbox, phba->mbox_mem_pool);
}
-
+ /* Free the active mailbox command back to the mailbox memory pool */
+ spin_lock_irq(&phba->hbalock);
psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ spin_unlock_irq(&phba->hbalock);
if (psli->mbox_active) {
mbox = psli->mbox_active;
mp = (struct lpfc_dmabuf *) (mbox->context1);
@@ -188,27 +258,14 @@ lpfc_mem_free(struct lpfc_hba * phba)
psli->mbox_active = NULL;
}
- for (i = 0; i < pool->current_count; i++)
- pci_pool_free(phba->lpfc_mbuf_pool, pool->elements[i].virt,
- pool->elements[i].phys);
- kfree(pool->elements);
-
- pci_pool_destroy(phba->lpfc_hbq_pool);
- mempool_destroy(phba->nlp_mem_pool);
- mempool_destroy(phba->mbox_mem_pool);
-
- pci_pool_destroy(phba->lpfc_scsi_dma_buf_pool);
- pci_pool_destroy(phba->lpfc_mbuf_pool);
-
- phba->lpfc_hbq_pool = NULL;
- phba->nlp_mem_pool = NULL;
- phba->mbox_mem_pool = NULL;
- phba->lpfc_scsi_dma_buf_pool = NULL;
- phba->lpfc_mbuf_pool = NULL;
+ /* Free and destroy all the allocated memory pools */
+ lpfc_mem_free(phba);
/* Free the iocb lookup array */
kfree(psli->iocbq_lookup);
psli->iocbq_lookup = NULL;
+
+ return;
}
/**
@@ -305,7 +362,7 @@ lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma)
* lpfc_els_hbq_alloc - Allocate an HBQ buffer
* @phba: HBA to allocate HBQ buffer for
*
- * Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hbq_pool PCI
+ * Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hrb_pool PCI
* pool along a non-DMA-mapped container for it.
*
* Notes: Not interrupt-safe. Must be called with no locks held.
@@ -323,7 +380,7 @@ lpfc_els_hbq_alloc(struct lpfc_hba *phba)
if (!hbqbp)
return NULL;
- hbqbp->dbuf.virt = pci_pool_alloc(phba->lpfc_hbq_pool, GFP_KERNEL,
+ hbqbp->dbuf.virt = pci_pool_alloc(phba->lpfc_hrb_pool, GFP_KERNEL,
&hbqbp->dbuf.phys);
if (!hbqbp->dbuf.virt) {
kfree(hbqbp);
@@ -334,7 +391,7 @@ lpfc_els_hbq_alloc(struct lpfc_hba *phba)
}
/**
- * lpfc_mem_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
+ * lpfc_els_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
* @phba: HBA buffer was allocated for
* @hbqbp: HBQ container returned by lpfc_els_hbq_alloc
*
@@ -348,12 +405,73 @@ lpfc_els_hbq_alloc(struct lpfc_hba *phba)
void
lpfc_els_hbq_free(struct lpfc_hba *phba, struct hbq_dmabuf *hbqbp)
{
- pci_pool_free(phba->lpfc_hbq_pool, hbqbp->dbuf.virt, hbqbp->dbuf.phys);
+ pci_pool_free(phba->lpfc_hrb_pool, hbqbp->dbuf.virt, hbqbp->dbuf.phys);
kfree(hbqbp);
return;
}
/**
+ * lpfc_sli4_rb_alloc - Allocate an SLI4 Receive buffer
+ * @phba: HBA to allocate a receive buffer for
+ *
+ * Description: Allocates a DMA-mapped receive buffer from the lpfc_hrb_pool PCI
+ * pool along a non-DMA-mapped container for it.
+ *
+ * Notes: Not interrupt-safe. Must be called with no locks held.
+ *
+ * Returns:
+ * pointer to HBQ on success
+ * NULL on failure
+ **/
+struct hbq_dmabuf *
+lpfc_sli4_rb_alloc(struct lpfc_hba *phba)
+{
+ struct hbq_dmabuf *dma_buf;
+
+ dma_buf = kmalloc(sizeof(struct hbq_dmabuf), GFP_KERNEL);
+ if (!dma_buf)
+ return NULL;
+
+ dma_buf->hbuf.virt = pci_pool_alloc(phba->lpfc_hrb_pool, GFP_KERNEL,
+ &dma_buf->hbuf.phys);
+ if (!dma_buf->hbuf.virt) {
+ kfree(dma_buf);
+ return NULL;
+ }
+ dma_buf->dbuf.virt = pci_pool_alloc(phba->lpfc_drb_pool, GFP_KERNEL,
+ &dma_buf->dbuf.phys);
+ if (!dma_buf->dbuf.virt) {
+ pci_pool_free(phba->lpfc_hrb_pool, dma_buf->hbuf.virt,
+ dma_buf->hbuf.phys);
+ kfree(dma_buf);
+ return NULL;
+ }
+ dma_buf->size = LPFC_BPL_SIZE;
+ return dma_buf;
+}
+
+/**
+ * lpfc_sli4_rb_free - Frees a receive buffer
+ * @phba: HBA buffer was allocated for
+ * @dmab: DMA Buffer container returned by lpfc_sli4_hbq_alloc
+ *
+ * Description: Frees both the container and the DMA-mapped buffers returned by
+ * lpfc_sli4_rb_alloc.
+ *
+ * Notes: Can be called with or without locks held.
+ *
+ * Returns: None
+ **/
+void
+lpfc_sli4_rb_free(struct lpfc_hba *phba, struct hbq_dmabuf *dmab)
+{
+ pci_pool_free(phba->lpfc_hrb_pool, dmab->hbuf.virt, dmab->hbuf.phys);
+ pci_pool_free(phba->lpfc_drb_pool, dmab->dbuf.virt, dmab->dbuf.phys);
+ kfree(dmab);
+ return;
+}
+
+/**
* lpfc_in_buf_free - Free a DMA buffer
* @phba: HBA buffer is associated with
* @mp: Buffer to free
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 08cdc77..09f659f 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -28,8 +28,10 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -361,7 +363,7 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
if (!mbox)
goto out;
- rc = lpfc_reg_login(phba, vport->vpi, icmd->un.rcvels.remoteID,
+ rc = lpfc_reg_rpi(phba, vport->vpi, icmd->un.rcvels.remoteID,
(uint8_t *) sp, mbox, 0);
if (rc) {
mempool_free(mbox, phba->mbox_mem_pool);
@@ -495,11 +497,19 @@ lpfc_rcv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
lpfc_els_rsp_acc(vport, ELS_CMD_PRLO, cmdiocb, ndlp, NULL);
else
lpfc_els_rsp_acc(vport, ELS_CMD_ACC, cmdiocb, ndlp, NULL);
+ if ((ndlp->nlp_type & NLP_FABRIC) &&
+ vport->port_type == LPFC_NPIV_PORT) {
+ lpfc_linkdown_port(vport);
+ mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ * 1);
+ spin_lock_irq(shost->host_lock);
+ ndlp->nlp_flag |= NLP_DELAY_TMO;
+ spin_unlock_irq(shost->host_lock);
- if ((!(ndlp->nlp_type & NLP_FABRIC) &&
- ((ndlp->nlp_type & NLP_FCP_TARGET) ||
- !(ndlp->nlp_type & NLP_FCP_INITIATOR))) ||
- (ndlp->nlp_state == NLP_STE_ADISC_ISSUE)) {
+ ndlp->nlp_last_elscmd = ELS_CMD_FDISC;
+ } else if ((!(ndlp->nlp_type & NLP_FABRIC) &&
+ ((ndlp->nlp_type & NLP_FCP_TARGET) ||
+ !(ndlp->nlp_type & NLP_FCP_INITIATOR))) ||
+ (ndlp->nlp_state == NLP_STE_ADISC_ISSUE)) {
/* Only try to re-login if this is NOT a Fabric Node */
mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ * 1);
spin_lock_irq(shost->host_lock);
@@ -567,7 +577,7 @@ lpfc_disc_set_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
- if (!ndlp->nlp_rpi) {
+ if (!(ndlp->nlp_flag & NLP_RPI_VALID)) {
ndlp->nlp_flag &= ~NLP_NPR_ADISC;
return 0;
}
@@ -857,7 +867,7 @@ lpfc_cmpl_plogi_plogi_issue(struct lpfc_vport *vport,
lpfc_unreg_rpi(vport, ndlp);
- if (lpfc_reg_login(phba, vport->vpi, irsp->un.elsreq64.remoteID,
+ if (lpfc_reg_rpi(phba, vport->vpi, irsp->un.elsreq64.remoteID,
(uint8_t *) sp, mbox, 0) == 0) {
switch (ndlp->nlp_DID) {
case NameServer_DID:
@@ -1068,6 +1078,7 @@ lpfc_cmpl_adisc_adisc_issue(struct lpfc_vport *vport,
struct lpfc_iocbq *cmdiocb, *rspiocb;
IOCB_t *irsp;
ADISC *ap;
+ int rc;
cmdiocb = (struct lpfc_iocbq *) arg;
rspiocb = cmdiocb->context_un.rsp_iocb;
@@ -1093,6 +1104,15 @@ lpfc_cmpl_adisc_adisc_issue(struct lpfc_vport *vport,
return ndlp->nlp_state;
}
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ rc = lpfc_sli4_resume_rpi(ndlp);
+ if (rc) {
+ /* Stay in state and retry. */
+ ndlp->nlp_prev_state = NLP_STE_ADISC_ISSUE;
+ return ndlp->nlp_state;
+ }
+ }
+
if (ndlp->nlp_type & NLP_FCP_TARGET) {
ndlp->nlp_prev_state = NLP_STE_ADISC_ISSUE;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_MAPPED_NODE);
@@ -1100,6 +1120,7 @@ lpfc_cmpl_adisc_adisc_issue(struct lpfc_vport *vport,
ndlp->nlp_prev_state = NLP_STE_ADISC_ISSUE;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
}
+
return ndlp->nlp_state;
}
@@ -1190,7 +1211,7 @@ lpfc_rcv_logo_reglogin_issue(struct lpfc_vport *vport,
/* cleanup any ndlp on mbox q waiting for reglogin cmpl */
if ((mb = phba->sli.mbox_active)) {
- if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
+ if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
(ndlp == (struct lpfc_nodelist *) mb->context2)) {
lpfc_nlp_put(ndlp);
mb->context2 = NULL;
@@ -1200,7 +1221,7 @@ lpfc_rcv_logo_reglogin_issue(struct lpfc_vport *vport,
spin_lock_irq(&phba->hbalock);
list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) {
- if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
+ if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
(ndlp == (struct lpfc_nodelist *) mb->context2)) {
mp = (struct lpfc_dmabuf *) (mb->context1);
if (mp) {
@@ -1251,7 +1272,7 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_vport *vport,
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
LPFC_MBOXQ_t *pmb = (LPFC_MBOXQ_t *) arg;
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
uint32_t did = mb->un.varWords[1];
if (mb->mbxStatus) {
@@ -1283,6 +1304,7 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_vport *vport,
}
ndlp->nlp_rpi = mb->un.varWords[0];
+ ndlp->nlp_flag |= NLP_RPI_VALID;
/* Only if we are not a fabric nport do we issue PRLI */
if (!(ndlp->nlp_type & NLP_FABRIC)) {
@@ -1878,11 +1900,12 @@ lpfc_cmpl_reglogin_npr_node(struct lpfc_vport *vport,
void *arg, uint32_t evt)
{
LPFC_MBOXQ_t *pmb = (LPFC_MBOXQ_t *) arg;
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
- if (!mb->mbxStatus)
+ if (!mb->mbxStatus) {
ndlp->nlp_rpi = mb->un.varWords[0];
- else {
+ ndlp->nlp_flag |= NLP_RPI_VALID;
+ } else {
if (ndlp->nlp_flag & NLP_NODEV_REMOVE) {
lpfc_drop_node(vport, ndlp);
return NLP_STE_FREED_NODE;
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 8032c5a..7991ba1 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -31,8 +31,10 @@
#include <scsi/scsi_transport_fc.h>
#include "lpfc_version.h"
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -57,6 +59,8 @@ static char *dif_op_str[] = {
"SCSI_PROT_READ_CONVERT",
"SCSI_PROT_WRITE_CONVERT"
};
+static void
+lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb);
static void
lpfc_debug_save_data(struct scsi_cmnd *cmnd)
@@ -325,7 +329,7 @@ lpfc_ramp_down_queue_handler(struct lpfc_hba *phba)
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
shost = lpfc_shost_from_vport(vports[i]);
shost_for_each_device(sdev, shost) {
new_queue_depth =
@@ -379,7 +383,7 @@ lpfc_ramp_up_queue_handler(struct lpfc_hba *phba)
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
shost = lpfc_shost_from_vport(vports[i]);
shost_for_each_device(sdev, shost) {
if (vports[i]->cfg_lun_queue_depth <=
@@ -427,7 +431,7 @@ lpfc_scsi_dev_block(struct lpfc_hba *phba)
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
shost = lpfc_shost_from_vport(vports[i]);
shost_for_each_device(sdev, shost) {
rport = starget_to_rport(scsi_target(sdev));
@@ -438,22 +442,23 @@ lpfc_scsi_dev_block(struct lpfc_hba *phba)
}
/**
- * lpfc_new_scsi_buf - Scsi buffer allocator
+ * lpfc_new_scsi_buf_s3 - Scsi buffer allocator for HBA with SLI3 IF spec
* @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
*
- * This routine allocates a scsi buffer, which contains all the necessary
- * information needed to initiate a SCSI I/O. The non-DMAable buffer region
- * contains information to build the IOCB. The DMAable region contains
- * memory for the FCP CMND, FCP RSP, and the initial BPL. In addition to
- * allocating memory, the FCP CMND and FCP RSP BDEs are setup in the BPL
- * and the BPL BDE is setup in the IOCB.
+ * This routine allocates a scsi buffer for device with SLI-3 interface spec,
+ * the scsi buffer contains all the necessary information needed to initiate
+ * a SCSI I/O. The non-DMAable buffer region contains information to build
+ * the IOCB. The DMAable region contains memory for the FCP CMND, FCP RSP,
+ * and the initial BPL. In addition to allocating memory, the FCP CMND and
+ * FCP RSP BDEs are setup in the BPL and the BPL BDE is setup in the IOCB.
*
* Return codes:
- * NULL - Error
- * Pointer to lpfc_scsi_buf data structure - Success
+ * int - number of scsi buffers that were allocated.
+ * 0 = failure, less than num_to_alloc is a partial failure.
**/
-static struct lpfc_scsi_buf *
-lpfc_new_scsi_buf(struct lpfc_vport *vport)
+static int
+lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc)
{
struct lpfc_hba *phba = vport->phba;
struct lpfc_scsi_buf *psb;
@@ -463,107 +468,401 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport)
dma_addr_t pdma_phys_fcp_rsp;
dma_addr_t pdma_phys_bpl;
uint16_t iotag;
+ int bcnt;
- psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
- if (!psb)
- return NULL;
+ for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
+ psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
+ if (!psb)
+ break;
+
+ /*
+ * Get memory from the pci pool to map the virt space to pci
+ * bus space for an I/O. The DMA buffer includes space for the
+ * struct fcp_cmnd, struct fcp_rsp and the number of bde's
+ * necessary to support the sg_tablesize.
+ */
+ psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool,
+ GFP_KERNEL, &psb->dma_handle);
+ if (!psb->data) {
+ kfree(psb);
+ break;
+ }
+
+ /* Initialize virtual ptrs to dma_buf region. */
+ memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
+
+ /* Allocate iotag for psb->cur_iocbq. */
+ iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
+ if (iotag == 0) {
+ pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
+ psb->data, psb->dma_handle);
+ kfree(psb);
+ break;
+ }
+ psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
+
+ psb->fcp_cmnd = psb->data;
+ psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
+ psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp);
+
+ /* Initialize local short-hand pointers. */
+ bpl = psb->fcp_bpl;
+ pdma_phys_fcp_cmd = psb->dma_handle;
+ pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd);
+ pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp);
+
+ /*
+ * The first two bdes are the FCP_CMD and FCP_RSP. The balance
+ * are sg list bdes. Initialize the first two and leave the
+ * rest for queuecommand.
+ */
+ bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd));
+ bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd));
+ bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd);
+ bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ bpl[0].tus.w = le32_to_cpu(bpl[0].tus.w);
+
+ /* Setup the physical region for the FCP RSP */
+ bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp));
+ bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp));
+ bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp);
+ bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ bpl[1].tus.w = le32_to_cpu(bpl[1].tus.w);
+
+ /*
+ * Since the IOCB for the FCP I/O is built into this
+ * lpfc_scsi_buf, initialize it with all known data now.
+ */
+ iocb = &psb->cur_iocbq.iocb;
+ iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
+ if ((phba->sli_rev == 3) &&
+ !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
+ /* fill in immediate fcp command BDE */
+ iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED;
+ iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
+ iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t,
+ unsli3.fcp_ext.icd);
+ iocb->un.fcpi64.bdl.addrHigh = 0;
+ iocb->ulpBdeCount = 0;
+ iocb->ulpLe = 0;
+ /* fill in responce BDE */
+ iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags =
+ BUFF_TYPE_BDE_64;
+ iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
+ sizeof(struct fcp_rsp);
+ iocb->unsli3.fcp_ext.rbde.addrLow =
+ putPaddrLow(pdma_phys_fcp_rsp);
+ iocb->unsli3.fcp_ext.rbde.addrHigh =
+ putPaddrHigh(pdma_phys_fcp_rsp);
+ } else {
+ iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
+ iocb->un.fcpi64.bdl.bdeSize =
+ (2 * sizeof(struct ulp_bde64));
+ iocb->un.fcpi64.bdl.addrLow =
+ putPaddrLow(pdma_phys_bpl);
+ iocb->un.fcpi64.bdl.addrHigh =
+ putPaddrHigh(pdma_phys_bpl);
+ iocb->ulpBdeCount = 1;
+ iocb->ulpLe = 1;
+ }
+ iocb->ulpClass = CLASS3;
+ psb->status = IOSTAT_SUCCESS;
+ /* Put it back into the SCSI buffer list */
+ lpfc_release_scsi_buf_s4(phba, psb);
- /*
- * Get memory from the pci pool to map the virt space to pci bus space
- * for an I/O. The DMA buffer includes space for the struct fcp_cmnd,
- * struct fcp_rsp and the number of bde's necessary to support the
- * sg_tablesize.
- */
- psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool, GFP_KERNEL,
- &psb->dma_handle);
- if (!psb->data) {
- kfree(psb);
- return NULL;
}
- /* Initialize virtual ptrs to dma_buf region. */
- memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
+ return bcnt;
+}
- /* Allocate iotag for psb->cur_iocbq. */
- iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
- if (iotag == 0) {
- pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
- psb->data, psb->dma_handle);
- kfree (psb);
- return NULL;
+/**
+ * lpfc_sli4_fcp_xri_aborted - Fast-path process of fcp xri abort
+ * @phba: pointer to lpfc hba data structure.
+ * @axri: pointer to the fcp xri abort wcqe structure.
+ *
+ * This routine is invoked by the worker thread to process a SLI4 fast-path
+ * FCP aborted xri.
+ **/
+void
+lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *phba,
+ struct sli4_wcqe_xri_aborted *axri)
+{
+ uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
+ struct lpfc_scsi_buf *psb, *next_psb;
+ unsigned long iflag = 0;
+
+ spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock, iflag);
+ list_for_each_entry_safe(psb, next_psb,
+ &phba->sli4_hba.lpfc_abts_scsi_buf_list, list) {
+ if (psb->cur_iocbq.sli4_xritag == xri) {
+ list_del(&psb->list);
+ psb->status = IOSTAT_SUCCESS;
+ spin_unlock_irqrestore(
+ &phba->sli4_hba.abts_scsi_buf_list_lock,
+ iflag);
+ lpfc_release_scsi_buf_s4(phba, psb);
+ return;
+ }
+ }
+ spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock,
+ iflag);
+}
+
+/**
+ * lpfc_sli4_repost_scsi_sgl_list - Repsot the Scsi buffers sgl pages as block
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine walks the list of scsi buffers that have been allocated and
+ * repost them to the HBA by using SGL block post. This is needed after a
+ * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine
+ * is responsible for moving all scsi buffers on the lpfc_abts_scsi_sgl_list
+ * to the lpfc_scsi_buf_list. If the repost fails, reject all scsi buffers.
+ *
+ * Returns: 0 = success, non-zero failure.
+ **/
+int
+lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *phba)
+{
+ struct lpfc_scsi_buf *psb;
+ int index, status, bcnt = 0, rcnt = 0, rc = 0;
+ LIST_HEAD(sblist);
+
+ for (index = 0; index < phba->sli4_hba.scsi_xri_cnt; index++) {
+ psb = phba->sli4_hba.lpfc_scsi_psb_array[index];
+ if (psb) {
+ /* Remove from SCSI buffer list */
+ list_del(&psb->list);
+ /* Add it to a local SCSI buffer list */
+ list_add_tail(&psb->list, &sblist);
+ if (++rcnt == LPFC_NEMBED_MBOX_SGL_CNT) {
+ bcnt = rcnt;
+ rcnt = 0;
+ }
+ } else
+ /* A hole present in the XRI array, need to skip */
+ bcnt = rcnt;
+
+ if (index == phba->sli4_hba.scsi_xri_cnt - 1)
+ /* End of XRI array for SCSI buffer, complete */
+ bcnt = rcnt;
+
+ /* Continue until collect up to a nembed page worth of sgls */
+ if (bcnt == 0)
+ continue;
+ /* Now, post the SCSI buffer list sgls as a block */
+ status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt);
+ /* Reset SCSI buffer count for next round of posting */
+ bcnt = 0;
+ while (!list_empty(&sblist)) {
+ list_remove_head(&sblist, psb, struct lpfc_scsi_buf,
+ list);
+ if (status) {
+ /* Put this back on the abort scsi list */
+ psb->status = IOSTAT_LOCAL_REJECT;
+ psb->result = IOERR_ABORT_REQUESTED;
+ rc++;
+ } else
+ psb->status = IOSTAT_SUCCESS;
+ /* Put it back into the SCSI buffer list */
+ lpfc_release_scsi_buf_s4(phba, psb);
+ }
}
- psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
+ return rc;
+}
- psb->fcp_cmnd = psb->data;
- psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
- psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) +
- sizeof(struct fcp_rsp);
+/**
+ * lpfc_new_scsi_buf_s4 - Scsi buffer allocator for HBA with SLI4 IF spec
+ * @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
+ *
+ * This routine allocates a scsi buffer for device with SLI-4 interface spec,
+ * the scsi buffer contains all the necessary information needed to initiate
+ * a SCSI I/O.
+ *
+ * Return codes:
+ * int - number of scsi buffers that were allocated.
+ * 0 = failure, less than num_to_alloc is a partial failure.
+ **/
+static int
+lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc)
+{
+ struct lpfc_hba *phba = vport->phba;
+ struct lpfc_scsi_buf *psb;
+ struct sli4_sge *sgl;
+ IOCB_t *iocb;
+ dma_addr_t pdma_phys_fcp_cmd;
+ dma_addr_t pdma_phys_fcp_rsp;
+ dma_addr_t pdma_phys_bpl, pdma_phys_bpl1;
+ uint16_t iotag, last_xritag = NO_XRI;
+ int status = 0, index;
+ int bcnt;
+ int non_sequential_xri = 0;
+ int rc = 0;
+ LIST_HEAD(sblist);
+
+ for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
+ psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
+ if (!psb)
+ break;
- /* Initialize local short-hand pointers. */
- bpl = psb->fcp_bpl;
- pdma_phys_fcp_cmd = psb->dma_handle;
- pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd);
- pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) +
- sizeof(struct fcp_rsp);
+ /*
+ * Get memory from the pci pool to map the virt space to pci bus
+ * space for an I/O. The DMA buffer includes space for the
+ * struct fcp_cmnd, struct fcp_rsp and the number of bde's
+ * necessary to support the sg_tablesize.
+ */
+ psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool,
+ GFP_KERNEL, &psb->dma_handle);
+ if (!psb->data) {
+ kfree(psb);
+ break;
+ }
- /*
- * The first two bdes are the FCP_CMD and FCP_RSP. The balance are sg
- * list bdes. Initialize the first two and leave the rest for
- * queuecommand.
- */
- bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd));
- bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd));
- bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd);
- bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
- bpl[0].tus.w = le32_to_cpu(bpl[0].tus.w);
-
- /* Setup the physical region for the FCP RSP */
- bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp));
- bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp));
- bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp);
- bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
- bpl[1].tus.w = le32_to_cpu(bpl[1].tus.w);
+ /* Initialize virtual ptrs to dma_buf region. */
+ memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
- /*
- * Since the IOCB for the FCP I/O is built into this lpfc_scsi_buf,
- * initialize it with all known data now.
- */
- iocb = &psb->cur_iocbq.iocb;
- iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
- if ((phba->sli_rev == 3) &&
- !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
- /* fill in immediate fcp command BDE */
- iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED;
+ /* Allocate iotag for psb->cur_iocbq. */
+ iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
+ if (iotag == 0) {
+ kfree(psb);
+ break;
+ }
+
+ psb->cur_iocbq.sli4_xritag = lpfc_sli4_next_xritag(phba);
+ if (psb->cur_iocbq.sli4_xritag == NO_XRI) {
+ pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
+ psb->data, psb->dma_handle);
+ kfree(psb);
+ break;
+ }
+ if (last_xritag != NO_XRI
+ && psb->cur_iocbq.sli4_xritag != (last_xritag+1)) {
+ non_sequential_xri = 1;
+ } else
+ list_add_tail(&psb->list, &sblist);
+ last_xritag = psb->cur_iocbq.sli4_xritag;
+
+ index = phba->sli4_hba.scsi_xri_cnt++;
+ psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
+
+ psb->fcp_bpl = psb->data;
+ psb->fcp_cmnd = (psb->data + phba->cfg_sg_dma_buf_size)
+ - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+ psb->fcp_rsp = (struct fcp_rsp *)((uint8_t *)psb->fcp_cmnd +
+ sizeof(struct fcp_cmnd));
+
+ /* Initialize local short-hand pointers. */
+ sgl = (struct sli4_sge *)psb->fcp_bpl;
+ pdma_phys_bpl = psb->dma_handle;
+ pdma_phys_fcp_cmd =
+ (psb->dma_handle + phba->cfg_sg_dma_buf_size)
+ - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+ pdma_phys_fcp_rsp = pdma_phys_fcp_cmd + sizeof(struct fcp_cmnd);
+
+ /*
+ * The first two bdes are the FCP_CMD and FCP_RSP. The balance
+ * are sg list bdes. Initialize the first two and leave the
+ * rest for queuecommand.
+ */
+ sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_cmd));
+ sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_cmd));
+ bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_cmnd));
+ bf_set(lpfc_sli4_sge_last, sgl, 0);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl->word3 = cpu_to_le32(sgl->word3);
+ sgl++;
+
+ /* Setup the physical region for the FCP RSP */
+ sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_rsp));
+ sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_rsp));
+ bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_rsp));
+ bf_set(lpfc_sli4_sge_last, sgl, 1);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl->word3 = cpu_to_le32(sgl->word3);
+
+ /*
+ * Since the IOCB for the FCP I/O is built into this
+ * lpfc_scsi_buf, initialize it with all known data now.
+ */
+ iocb = &psb->cur_iocbq.iocb;
+ iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
+ iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_64;
+ /* setting the BLP size to 2 * sizeof BDE may not be correct.
+ * We are setting the bpl to point to out sgl. An sgl's
+ * entries are 16 bytes, a bpl entries are 12 bytes.
+ */
iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
- iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t,
- unsli3.fcp_ext.icd);
- iocb->un.fcpi64.bdl.addrHigh = 0;
- iocb->ulpBdeCount = 0;
- iocb->ulpLe = 0;
- /* fill in responce BDE */
- iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
- iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
- sizeof(struct fcp_rsp);
- iocb->unsli3.fcp_ext.rbde.addrLow =
- putPaddrLow(pdma_phys_fcp_rsp);
- iocb->unsli3.fcp_ext.rbde.addrHigh =
- putPaddrHigh(pdma_phys_fcp_rsp);
- } else {
- iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
- iocb->un.fcpi64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));
- iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_bpl);
- iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_bpl);
+ iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_fcp_cmd);
+ iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_fcp_cmd);
iocb->ulpBdeCount = 1;
iocb->ulpLe = 1;
+ iocb->ulpClass = CLASS3;
+ if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
+ pdma_phys_bpl1 = pdma_phys_bpl + SGL_PAGE_SIZE;
+ else
+ pdma_phys_bpl1 = 0;
+ psb->dma_phys_bpl = pdma_phys_bpl;
+ phba->sli4_hba.lpfc_scsi_psb_array[index] = psb;
+ if (non_sequential_xri) {
+ status = lpfc_sli4_post_sgl(phba, pdma_phys_bpl,
+ pdma_phys_bpl1,
+ psb->cur_iocbq.sli4_xritag);
+ if (status) {
+ /* Put this back on the abort scsi list */
+ psb->status = IOSTAT_LOCAL_REJECT;
+ psb->result = IOERR_ABORT_REQUESTED;
+ rc++;
+ } else
+ psb->status = IOSTAT_SUCCESS;
+ /* Put it back into the SCSI buffer list */
+ lpfc_release_scsi_buf_s4(phba, psb);
+ break;
+ }
+ }
+ if (bcnt) {
+ status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt);
+ /* Reset SCSI buffer count for next round of posting */
+ while (!list_empty(&sblist)) {
+ list_remove_head(&sblist, psb, struct lpfc_scsi_buf,
+ list);
+ if (status) {
+ /* Put this back on the abort scsi list */
+ psb->status = IOSTAT_LOCAL_REJECT;
+ psb->result = IOERR_ABORT_REQUESTED;
+ rc++;
+ } else
+ psb->status = IOSTAT_SUCCESS;
+ /* Put it back into the SCSI buffer list */
+ lpfc_release_scsi_buf_s4(phba, psb);
+ }
}
- iocb->ulpClass = CLASS3;
- return psb;
+ return bcnt + non_sequential_xri - rc;
}
/**
- * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list list of Hba
- * @phba: The Hba for which this call is being executed.
+ * lpfc_new_scsi_buf - Wrapper funciton for scsi buffer allocator
+ * @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
+ *
+ * This routine wraps the actual SCSI buffer allocator function pointer from
+ * the lpfc_hba struct.
+ *
+ * Return codes:
+ * int - number of scsi buffers that were allocated.
+ * 0 = failure, less than num_to_alloc is a partial failure.
+ **/
+static inline int
+lpfc_new_scsi_buf(struct lpfc_vport *vport, int num_to_alloc)
+{
+ return vport->phba->lpfc_new_scsi_buf(vport, num_to_alloc);
+}
+
+/**
+ * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
+ * @phba: The HBA for which this call is being executed.
*
* This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
* and returns to caller.
@@ -591,7 +890,7 @@ lpfc_get_scsi_buf(struct lpfc_hba * phba)
}
/**
- * lpfc_release_scsi_buf - Return a scsi buffer back to hba's lpfc_scsi_buf_list
+ * lpfc_release_scsi_buf - Return a scsi buffer back to hba scsi buf list
* @phba: The Hba for which this call is being executed.
* @psb: The scsi buffer which is being released.
*
@@ -599,7 +898,7 @@ lpfc_get_scsi_buf(struct lpfc_hba * phba)
* lpfc_scsi_buf_list list.
**/
static void
-lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+lpfc_release_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
{
unsigned long iflag = 0;
@@ -610,21 +909,69 @@ lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
}
/**
- * lpfc_scsi_prep_dma_buf - Routine to do DMA mapping for scsi buffer
+ * lpfc_release_scsi_buf_s4: Return a scsi buffer back to hba scsi buf list.
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is being released.
+ *
+ * This routine releases @psb scsi buffer by adding it to tail of @phba
+ * lpfc_scsi_buf_list list. For SLI4 XRI's are tied to the scsi buffer
+ * and cannot be reused for at least RA_TOV amount of time if it was
+ * aborted.
+ **/
+static void
+lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+ unsigned long iflag = 0;
+
+ if (psb->status == IOSTAT_LOCAL_REJECT
+ && psb->result == IOERR_ABORT_REQUESTED) {
+ spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock,
+ iflag);
+ psb->pCmd = NULL;
+ list_add_tail(&psb->list,
+ &phba->sli4_hba.lpfc_abts_scsi_buf_list);
+ spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock,
+ iflag);
+ } else {
+
+ spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
+ psb->pCmd = NULL;
+ list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list);
+ spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
+ }
+}
+
+/**
+ * lpfc_release_scsi_buf: Return a scsi buffer back to hba scsi buf list.
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is being released.
+ *
+ * This routine releases @psb scsi buffer by adding it to tail of @phba
+ * lpfc_scsi_buf_list list.
+ **/
+static void
+lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+
+ phba->lpfc_release_scsi_buf(phba, psb);
+}
+
+/**
+ * lpfc_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec
* @phba: The Hba for which this call is being executed.
* @lpfc_cmd: The scsi buffer which is going to be mapped.
*
* This routine does the pci dma mapping for scatter-gather list of scsi cmnd
- * field of @lpfc_cmd. This routine scans through sg elements and format the
- * bdea. This routine also initializes all IOCB fields which are dependent on
- * scsi command request buffer.
+ * field of @lpfc_cmd for device with SLI-3 interface spec. This routine scans
+ * through sg elements and format the bdea. This routine also initializes all
+ * IOCB fields which are dependent on scsi command request buffer.
*
* Return codes:
* 1 - Error
* 0 - Success
**/
static int
-lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
{
struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
struct scatterlist *sgel = NULL;
@@ -827,8 +1174,8 @@ lpfc_cmd_blksize(struct scsi_cmnd *sc)
* @reftag: out: ref tag (reference tag)
*
* Description:
- * Extract DIF paramters from the command if possible. Otherwise,
- * use default paratmers.
+ * Extract DIF parameters from the command if possible. Otherwise,
+ * use default parameters.
*
**/
static inline void
@@ -1412,6 +1759,133 @@ out:
}
/**
+ * lpfc_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be mapped.
+ *
+ * This routine does the pci dma mapping for scatter-gather list of scsi cmnd
+ * field of @lpfc_cmd for device with SLI-4 interface spec.
+ *
+ * Return codes:
+ * 1 - Error
+ * 0 - Success
+ **/
+static int
+lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+{
+ struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
+ struct scatterlist *sgel = NULL;
+ struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
+ struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
+ IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
+ dma_addr_t physaddr;
+ uint32_t num_bde = 0;
+ uint32_t dma_len;
+ uint32_t dma_offset = 0;
+ int nseg;
+
+ /*
+ * There are three possibilities here - use scatter-gather segment, use
+ * the single mapping, or neither. Start the lpfc command prep by
+ * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
+ * data bde entry.
+ */
+ if (scsi_sg_count(scsi_cmnd)) {
+ /*
+ * The driver stores the segment count returned from pci_map_sg
+ * because this a count of dma-mappings used to map the use_sg
+ * pages. They are not guaranteed to be the same for those
+ * architectures that implement an IOMMU.
+ */
+
+ nseg = scsi_dma_map(scsi_cmnd);
+ if (unlikely(!nseg))
+ return 1;
+ sgl += 1;
+ /* clear the last flag in the fcp_rsp map entry */
+ sgl->word2 = le32_to_cpu(sgl->word2);
+ bf_set(lpfc_sli4_sge_last, sgl, 0);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl += 1;
+
+ lpfc_cmd->seg_cnt = nseg;
+ if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
+ printk(KERN_ERR "%s: Too many sg segments from "
+ "dma_map_sg. Config %d, seg_cnt %d\n",
+ __func__, phba->cfg_sg_seg_cnt,
+ lpfc_cmd->seg_cnt);
+ scsi_dma_unmap(scsi_cmnd);
+ return 1;
+ }
+
+ /*
+ * The driver established a maximum scatter-gather segment count
+ * during probe that limits the number of sg elements in any
+ * single scsi command. Just run through the seg_cnt and format
+ * the sge's.
+ * When using SLI-3 the driver will try to fit all the BDEs into
+ * the IOCB. If it can't then the BDEs get added to a BPL as it
+ * does for SLI-2 mode.
+ */
+ scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) {
+ physaddr = sg_dma_address(sgel);
+ dma_len = sg_dma_len(sgel);
+ bf_set(lpfc_sli4_sge_len, sgl, sg_dma_len(sgel));
+ sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr));
+ sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr));
+ if ((num_bde + 1) == nseg)
+ bf_set(lpfc_sli4_sge_last, sgl, 1);
+ else
+ bf_set(lpfc_sli4_sge_last, sgl, 0);
+ bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl->word3 = cpu_to_le32(sgl->word3);
+ dma_offset += dma_len;
+ sgl++;
+ }
+ } else {
+ sgl += 1;
+ /* clear the last flag in the fcp_rsp map entry */
+ sgl->word2 = le32_to_cpu(sgl->word2);
+ bf_set(lpfc_sli4_sge_last, sgl, 1);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ }
+
+ /*
+ * Finish initializing those IOCB fields that are dependent on the
+ * scsi_cmnd request_buffer. Note that for SLI-2 the bdeSize is
+ * explicitly reinitialized.
+ * all iocb memory resources are reused.
+ */
+ fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd));
+
+ /*
+ * Due to difference in data length between DIF/non-DIF paths,
+ * we need to set word 4 of IOCB here
+ */
+ iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
+ return 0;
+}
+
+/**
+ * lpfc_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be mapped.
+ *
+ * This routine wraps the actual DMA mapping function pointer from the
+ * lpfc_hba struct.
+ *
+ * Return codes:
+ * 1 - Error
+ * 0 - Success
+ **/
+static inline int
+lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+{
+ return phba->lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
+}
+
+/**
* lpfc_send_scsi_error_event - Posts an event when there is SCSI error
* @phba: Pointer to hba context object.
* @vport: Pointer to vport object.
@@ -1504,15 +1978,15 @@ lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport,
}
/**
- * lpfc_scsi_unprep_dma_buf - Routine to un-map DMA mapping of scatter gather
- * @phba: The Hba for which this call is being executed.
+ * lpfc_scsi_unprep_dma_buf_s3 - Un-map DMA mapping of SG-list for SLI3 dev
+ * @phba: The HBA for which this call is being executed.
* @psb: The scsi buffer which is going to be un-mapped.
*
* This routine does DMA un-mapping of scatter gather list of scsi command
- * field of @lpfc_cmd.
+ * field of @lpfc_cmd for device with SLI-3 interface spec.
**/
static void
-lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
+lpfc_scsi_unprep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
{
/*
* There are only two special cases to consider. (1) the scsi command
@@ -1529,6 +2003,36 @@ lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
}
/**
+ * lpfc_scsi_unprep_dma_buf_s4 - Un-map DMA mapping of SG-list for SLI4 dev
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is going to be un-mapped.
+ *
+ * This routine does DMA un-mapping of scatter gather list of scsi command
+ * field of @lpfc_cmd for device with SLI-4 interface spec. If we have to
+ * remove the sgl for this scsi buffer then we will do it here. For now
+ * we should be able to just call the sli3 unprep routine.
+ **/
+static void
+lpfc_scsi_unprep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+ lpfc_scsi_unprep_dma_buf_s3(phba, psb);
+}
+
+/**
+ * lpfc_scsi_unprep_dma_buf - Wrapper function for unmap DMA mapping of SG-list
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is going to be un-mapped.
+ *
+ * This routine does DMA un-mapping of scatter gather list of scsi command
+ * field of @lpfc_cmd for device with SLI-4 interface spec.
+ **/
+static void
+lpfc_scsi_unprep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+ phba->lpfc_scsi_unprep_dma_buf(phba, psb);
+}
+
+/**
* lpfc_handler_fcp_err - FCP response handler
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
@@ -1676,7 +2180,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
* lpfc_scsi_cmd_iocb_cmpl - Scsi cmnd IOCB completion routine
* @phba: The Hba for which this call is being executed.
* @pIocbIn: The command IOCBQ for the scsi cmnd.
- * @pIocbOut: The response IOCBQ for the scsi cmnd .
+ * @pIocbOut: The response IOCBQ for the scsi cmnd.
*
* This routine assigns scsi command result by looking into response IOCB
* status field appropriately. This routine handles QUEUE FULL condition as
@@ -1957,16 +2461,16 @@ lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd)
}
/**
- * lpfc_scsi_prep_cmnd - Routine to convert scsi cmnd to FCP information unit
+ * lpfc_scsi_prep_cmnd_s3 - Convert scsi cmnd to FCP infor unit for SLI3 dev
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: The scsi command which needs to send.
* @pnode: Pointer to lpfc_nodelist.
*
* This routine initializes fcp_cmnd and iocb data structure from scsi command
- * to transfer.
+ * to transfer for device with SLI3 interface spec.
**/
static void
-lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+lpfc_scsi_prep_cmnd_s3(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
struct lpfc_nodelist *pnode)
{
struct lpfc_hba *phba = vport->phba;
@@ -2013,8 +2517,11 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
if (scsi_sg_count(scsi_cmnd)) {
if (datadir == DMA_TO_DEVICE) {
iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR;
- iocb_cmd->un.fcpi.fcpi_parm = 0;
- iocb_cmd->ulpPU = 0;
+ if (phba->sli_rev < LPFC_SLI_REV4) {
+ iocb_cmd->un.fcpi.fcpi_parm = 0;
+ iocb_cmd->ulpPU = 0;
+ } else
+ iocb_cmd->ulpPU = PARM_READ_CHECK;
fcp_cmnd->fcpCntl3 = WRITE_DATA;
phba->fc4OutputRequests++;
} else {
@@ -2051,20 +2558,60 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
}
/**
- * lpfc_scsi_prep_task_mgmt_cmnd - Convert scsi TM cmnd to FCP information unit
+ * lpfc_scsi_prep_cmnd_s4 - Convert scsi cmnd to FCP infor unit for SLI4 dev
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: The scsi command which needs to send.
+ * @pnode: Pointer to lpfc_nodelist.
+ *
+ * This routine initializes fcp_cmnd and iocb data structure from scsi command
+ * to transfer for device with SLI4 interface spec.
+ **/
+static void
+lpfc_scsi_prep_cmnd_s4(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+ struct lpfc_nodelist *pnode)
+{
+ /*
+ * The prep cmnd routines do not touch the sgl or its
+ * entries. We may not have to do anything different.
+ * I will leave this function in place until we can
+ * run some IO through the driver and determine if changes
+ * are needed.
+ */
+ return lpfc_scsi_prep_cmnd_s3(vport, lpfc_cmd, pnode);
+}
+
+/**
+ * lpfc_scsi_prep_cmnd - Wrapper func for convert scsi cmnd to FCP info unit
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: The scsi command which needs to send.
+ * @pnode: Pointer to lpfc_nodelist.
+ *
+ * This routine wraps the actual convert SCSI cmnd function pointer from
+ * the lpfc_hba struct.
+ **/
+static inline void
+lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+ struct lpfc_nodelist *pnode)
+{
+ vport->phba->lpfc_scsi_prep_cmnd(vport, lpfc_cmd, pnode);
+}
+
+/**
+ * lpfc_scsi_prep_task_mgmt_cmnd_s3 - Convert SLI3 scsi TM cmd to FCP info unit
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
* @lun: Logical unit number.
* @task_mgmt_cmd: SCSI task management command.
*
- * This routine creates FCP information unit corresponding to @task_mgmt_cmd.
+ * This routine creates FCP information unit corresponding to @task_mgmt_cmd
+ * for device with SLI-3 interface spec.
*
* Return codes:
* 0 - Error
* 1 - Success
**/
static int
-lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
+lpfc_scsi_prep_task_mgmt_cmd_s3(struct lpfc_vport *vport,
struct lpfc_scsi_buf *lpfc_cmd,
unsigned int lun,
uint8_t task_mgmt_cmd)
@@ -2114,6 +2661,107 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
}
/**
+ * lpfc_scsi_prep_task_mgmt_cmnd_s4 - Convert SLI4 scsi TM cmd to FCP info unit
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
+ * @lun: Logical unit number.
+ * @task_mgmt_cmd: SCSI task management command.
+ *
+ * This routine creates FCP information unit corresponding to @task_mgmt_cmd
+ * for device with SLI-4 interface spec.
+ *
+ * Return codes:
+ * 0 - Error
+ * 1 - Success
+ **/
+static int
+lpfc_scsi_prep_task_mgmt_cmd_s4(struct lpfc_vport *vport,
+ struct lpfc_scsi_buf *lpfc_cmd,
+ unsigned int lun,
+ uint8_t task_mgmt_cmd)
+{
+ /*
+ * The prep cmnd routines do not touch the sgl or its
+ * entries. We may not have to do anything different.
+ * I will leave this function in place until we can
+ * run some IO through the driver and determine if changes
+ * are needed.
+ */
+ return lpfc_scsi_prep_task_mgmt_cmd_s3(vport, lpfc_cmd, lun,
+ task_mgmt_cmd);
+}
+
+/**
+ * lpfc_scsi_prep_task_mgmt_cmnd - Wrapper func convert scsi TM cmd to FCP info
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
+ * @lun: Logical unit number.
+ * @task_mgmt_cmd: SCSI task management command.
+ *
+ * This routine wraps the actual convert SCSI TM to FCP information unit
+ * function pointer from the lpfc_hba struct.
+ *
+ * Return codes:
+ * 0 - Error
+ * 1 - Success
+ **/
+static inline int
+lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
+ struct lpfc_scsi_buf *lpfc_cmd,
+ unsigned int lun,
+ uint8_t task_mgmt_cmd)
+{
+ struct lpfc_hba *phba = vport->phba;
+
+ return phba->lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun,
+ task_mgmt_cmd);
+}
+
+/**
+ * lpfc_scsi_api_table_setup - Set up scsi api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the SCSI interface API function jump table in @phba
+ * struct.
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+
+ switch (dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s3;
+ phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s3;
+ phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s3;
+ phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s3;
+ phba->lpfc_scsi_prep_task_mgmt_cmd =
+ lpfc_scsi_prep_task_mgmt_cmd_s3;
+ phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3;
+ break;
+ case LPFC_PCI_DEV_OC:
+ phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s4;
+ phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4;
+ phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s4;
+ phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s4;
+ phba->lpfc_scsi_prep_task_mgmt_cmd =
+ lpfc_scsi_prep_task_mgmt_cmd_s4;
+ phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1418 Invalid HBA PCI-device group: 0x%x\n",
+ dev_grp);
+ return -ENODEV;
+ break;
+ }
+ phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf;
+ phba->lpfc_rampdown_queue_depth = lpfc_rampdown_queue_depth;
+ return 0;
+}
+
+/**
* lpfc_taskmgmt_def_cmpl - IOCB completion routine for task management command
* @phba: The Hba for which this call is being executed.
* @cmdiocbq: Pointer to lpfc_iocbq data structure.
@@ -2178,9 +2826,8 @@ lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport,
lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
"0702 Issue Target Reset to TGT %d Data: x%x x%x\n",
tgt_id, rdata->pnode->nlp_rpi, rdata->pnode->nlp_flag);
- status = lpfc_sli_issue_iocb_wait(phba,
- &phba->sli.ring[phba->sli.fcp_ring],
- iocbq, iocbqrsp, lpfc_cmd->timeout);
+ status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
+ iocbq, iocbqrsp, lpfc_cmd->timeout);
if (status != IOCB_SUCCESS) {
if (status == IOCB_TIMEDOUT) {
iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
@@ -2305,7 +2952,6 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
struct Scsi_Host *shost = cmnd->device->host;
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
- struct lpfc_sli *psli = &phba->sli;
struct lpfc_rport_data *rdata = cmnd->device->hostdata;
struct lpfc_nodelist *ndlp = rdata->pnode;
struct lpfc_scsi_buf *lpfc_cmd;
@@ -2427,7 +3073,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
lpfc_scsi_prep_cmnd(vport, lpfc_cmd, ndlp);
atomic_inc(&ndlp->cmd_pending);
- err = lpfc_sli_issue_iocb(phba, &phba->sli.ring[psli->fcp_ring],
+ err = lpfc_sli_issue_iocb(phba, LPFC_FCP_RING,
&lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB);
if (err) {
atomic_dec(&ndlp->cmd_pending);
@@ -2490,7 +3136,6 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
struct Scsi_Host *shost = cmnd->device->host;
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
- struct lpfc_sli_ring *pring = &phba->sli.ring[phba->sli.fcp_ring];
struct lpfc_iocbq *iocb;
struct lpfc_iocbq *abtsiocb;
struct lpfc_scsi_buf *lpfc_cmd;
@@ -2531,7 +3176,10 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
icmd = &abtsiocb->iocb;
icmd->un.acxri.abortType = ABORT_TYPE_ABTS;
icmd->un.acxri.abortContextTag = cmd->ulpContext;
- icmd->un.acxri.abortIoTag = cmd->ulpIoTag;
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ icmd->un.acxri.abortIoTag = iocb->sli4_xritag;
+ else
+ icmd->un.acxri.abortIoTag = cmd->ulpIoTag;
icmd->ulpLe = 1;
icmd->ulpClass = cmd->ulpClass;
@@ -2542,7 +3190,8 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
abtsiocb->vport = vport;
- if (lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_FCP_RING, abtsiocb, 0) ==
+ IOCB_ERROR) {
lpfc_sli_release_iocbq(phba, abtsiocb);
ret = FAILED;
goto out;
@@ -2668,8 +3317,7 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
"0703 Issue target reset to TGT %d LUN %d "
"rpi x%x nlp_flag x%x\n", cmnd->device->id,
cmnd->device->lun, pnode->nlp_rpi, pnode->nlp_flag);
- status = lpfc_sli_issue_iocb_wait(phba,
- &phba->sli.ring[phba->sli.fcp_ring],
+ status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
iocbq, iocbqrsp, lpfc_cmd->timeout);
if (status == IOCB_TIMEDOUT) {
iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
@@ -2825,11 +3473,10 @@ lpfc_slave_alloc(struct scsi_device *sdev)
{
struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
struct lpfc_hba *phba = vport->phba;
- struct lpfc_scsi_buf *scsi_buf = NULL;
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
- uint32_t total = 0, i;
+ uint32_t total = 0;
uint32_t num_to_alloc = 0;
- unsigned long flags;
+ int num_allocated = 0;
if (!rport || fc_remote_port_chkready(rport))
return -ENXIO;
@@ -2863,20 +3510,13 @@ lpfc_slave_alloc(struct scsi_device *sdev)
(phba->cfg_hba_queue_depth - total));
num_to_alloc = phba->cfg_hba_queue_depth - total;
}
-
- for (i = 0; i < num_to_alloc; i++) {
- scsi_buf = lpfc_new_scsi_buf(vport);
- if (!scsi_buf) {
- lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
- "0706 Failed to allocate "
- "command buffer\n");
- break;
- }
-
- spin_lock_irqsave(&phba->scsi_buf_list_lock, flags);
- phba->total_scsi_bufs++;
- list_add_tail(&scsi_buf->list, &phba->lpfc_scsi_buf_list);
- spin_unlock_irqrestore(&phba->scsi_buf_list_lock, flags);
+ num_allocated = lpfc_new_scsi_buf(vport, num_to_alloc);
+ if (num_to_alloc != num_allocated) {
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
+ "0708 Allocation request of %d "
+ "command buffers did not succeed. "
+ "Allocated %d buffers.\n",
+ num_to_alloc, num_allocated);
}
return 0;
}
diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h
index c7c440d..65dfc8b 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.h
+++ b/drivers/scsi/lpfc/lpfc_scsi.h
@@ -140,6 +140,8 @@ struct lpfc_scsi_buf {
struct fcp_rsp *fcp_rsp;
struct ulp_bde64 *fcp_bpl;
+ dma_addr_t dma_phys_bpl;
+
/* cur_iocbq has phys of the dma-able buffer.
* Iotag is in here
*/
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index eb5c75c..ff04daf 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -29,9 +29,12 @@
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include <scsi/fc/fc_fs.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -40,24 +43,7 @@
#include "lpfc_logmsg.h"
#include "lpfc_compat.h"
#include "lpfc_debugfs.h"
-
-/*
- * Define macro to log: Mailbox command x%x cannot issue Data
- * This allows multiple uses of lpfc_msgBlk0311
- * w/o perturbing log msg utility.
- */
-#define LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag) \
- lpfc_printf_log(phba, \
- KERN_INFO, \
- LOG_MBOX | LOG_SLI, \
- "(%d):0311 Mailbox command x%x cannot " \
- "issue Data: x%x x%x x%x\n", \
- pmbox->vport ? pmbox->vport->vpi : 0, \
- pmbox->mb.mbxCommand, \
- phba->pport->port_state, \
- psli->sli_flag, \
- flag)
-
+#include "lpfc_vport.h"
/* There are only four IOCB completion types. */
typedef enum _lpfc_iocb_type {
@@ -67,6 +53,350 @@ typedef enum _lpfc_iocb_type {
LPFC_ABORT_IOCB
} lpfc_iocb_type;
+
+/* Provide function prototypes local to this module. */
+static int lpfc_sli_issue_mbox_s4(struct lpfc_hba *, LPFC_MBOXQ_t *,
+ uint32_t);
+static int lpfc_sli4_read_rev(struct lpfc_hba *, LPFC_MBOXQ_t *,
+ uint8_t *, uint32_t *);
+
+static IOCB_t *
+lpfc_get_iocb_from_iocbq(struct lpfc_iocbq *iocbq)
+{
+ return &iocbq->iocb;
+}
+
+/**
+ * lpfc_sli4_wq_put - Put a Work Queue Entry on an Work Queue
+ * @q: The Work Queue to operate on.
+ * @wqe: The work Queue Entry to put on the Work queue.
+ *
+ * This routine will copy the contents of @wqe to the next available entry on
+ * the @q. This function will then ring the Work Queue Doorbell to signal the
+ * HBA to start processing the Work Queue Entry. This function returns 0 if
+ * successful. If no entries are available on @q then this function will return
+ * -ENOMEM.
+ * The caller is expected to hold the hbalock when calling this routine.
+ **/
+static uint32_t
+lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe *wqe)
+{
+ union lpfc_wqe *temp_wqe = q->qe[q->host_index].wqe;
+ struct lpfc_register doorbell;
+ uint32_t host_index;
+
+ /* If the host has not yet processed the next entry then we are done */
+ if (((q->host_index + 1) % q->entry_count) == q->hba_index)
+ return -ENOMEM;
+ /* set consumption flag every once in a while */
+ if (!((q->host_index + 1) % LPFC_RELEASE_NOTIFICATION_INTERVAL))
+ bf_set(lpfc_wqe_gen_wqec, &wqe->generic, 1);
+
+ lpfc_sli_pcimem_bcopy(wqe, temp_wqe, q->entry_size);
+
+ /* Update the host index before invoking device */
+ host_index = q->host_index;
+ q->host_index = ((q->host_index + 1) % q->entry_count);
+
+ /* Ring Doorbell */
+ doorbell.word0 = 0;
+ bf_set(lpfc_wq_doorbell_num_posted, &doorbell, 1);
+ bf_set(lpfc_wq_doorbell_index, &doorbell, host_index);
+ bf_set(lpfc_wq_doorbell_id, &doorbell, q->queue_id);
+ writel(doorbell.word0, q->phba->sli4_hba.WQDBregaddr);
+ readl(q->phba->sli4_hba.WQDBregaddr); /* Flush */
+
+ return 0;
+}
+
+/**
+ * lpfc_sli4_wq_release - Updates internal hba index for WQ
+ * @q: The Work Queue to operate on.
+ * @index: The index to advance the hba index to.
+ *
+ * This routine will update the HBA index of a queue to reflect consumption of
+ * Work Queue Entries by the HBA. When the HBA indicates that it has consumed
+ * an entry the host calls this function to update the queue's internal
+ * pointers. This routine returns the number of entries that were consumed by
+ * the HBA.
+ **/
+static uint32_t
+lpfc_sli4_wq_release(struct lpfc_queue *q, uint32_t index)
+{
+ uint32_t released = 0;
+
+ if (q->hba_index == index)
+ return 0;
+ do {
+ q->hba_index = ((q->hba_index + 1) % q->entry_count);
+ released++;
+ } while (q->hba_index != index);
+ return released;
+}
+
+/**
+ * lpfc_sli4_mq_put - Put a Mailbox Queue Entry on an Mailbox Queue
+ * @q: The Mailbox Queue to operate on.
+ * @wqe: The Mailbox Queue Entry to put on the Work queue.
+ *
+ * This routine will copy the contents of @mqe to the next available entry on
+ * the @q. This function will then ring the Work Queue Doorbell to signal the
+ * HBA to start processing the Work Queue Entry. This function returns 0 if
+ * successful. If no entries are available on @q then this function will return
+ * -ENOMEM.
+ * The caller is expected to hold the hbalock when calling this routine.
+ **/
+static uint32_t
+lpfc_sli4_mq_put(struct lpfc_queue *q, struct lpfc_mqe *mqe)
+{
+ struct lpfc_mqe *temp_mqe = q->qe[q->host_index].mqe;
+ struct lpfc_register doorbell;
+ uint32_t host_index;
+
+ /* If the host has not yet processed the next entry then we are done */
+ if (((q->host_index + 1) % q->entry_count) == q->hba_index)
+ return -ENOMEM;
+ lpfc_sli_pcimem_bcopy(mqe, temp_mqe, q->entry_size);
+ /* Save off the mailbox pointer for completion */
+ q->phba->mbox = (MAILBOX_t *)temp_mqe;
+
+ /* Update the host index before invoking device */
+ host_index = q->host_index;
+ q->host_index = ((q->host_index + 1) % q->entry_count);
+
+ /* Ring Doorbell */
+ doorbell.word0 = 0;
+ bf_set(lpfc_mq_doorbell_num_posted, &doorbell, 1);
+ bf_set(lpfc_mq_doorbell_id, &doorbell, q->queue_id);
+ writel(doorbell.word0, q->phba->sli4_hba.MQDBregaddr);
+ readl(q->phba->sli4_hba.MQDBregaddr); /* Flush */
+ return 0;
+}
+
+/**
+ * lpfc_sli4_mq_release - Updates internal hba index for MQ
+ * @q: The Mailbox Queue to operate on.
+ *
+ * This routine will update the HBA index of a queue to reflect consumption of
+ * a Mailbox Queue Entry by the HBA. When the HBA indicates that it has consumed
+ * an entry the host calls this function to update the queue's internal
+ * pointers. This routine returns the number of entries that were consumed by
+ * the HBA.
+ **/
+static uint32_t
+lpfc_sli4_mq_release(struct lpfc_queue *q)
+{
+ /* Clear the mailbox pointer for completion */
+ q->phba->mbox = NULL;
+ q->hba_index = ((q->hba_index + 1) % q->entry_count);
+ return 1;
+}
+
+/**
+ * lpfc_sli4_eq_get - Gets the next valid EQE from a EQ
+ * @q: The Event Queue to get the first valid EQE from
+ *
+ * This routine will get the first valid Event Queue Entry from @q, update
+ * the queue's internal hba index, and return the EQE. If no valid EQEs are in
+ * the Queue (no more work to do), or the Queue is full of EQEs that have been
+ * processed, but not popped back to the HBA then this routine will return NULL.
+ **/
+static struct lpfc_eqe *
+lpfc_sli4_eq_get(struct lpfc_queue *q)
+{
+ struct lpfc_eqe *eqe = q->qe[q->hba_index].eqe;
+
+ /* If the next EQE is not valid then we are done */
+ if (!bf_get(lpfc_eqe_valid, eqe))
+ return NULL;
+ /* If the host has not yet processed the next entry then we are done */
+ if (((q->hba_index + 1) % q->entry_count) == q->host_index)
+ return NULL;
+
+ q->hba_index = ((q->hba_index + 1) % q->entry_count);
+ return eqe;
+}
+
+/**
+ * lpfc_sli4_eq_release - Indicates the host has finished processing an EQ
+ * @q: The Event Queue that the host has completed processing for.
+ * @arm: Indicates whether the host wants to arms this CQ.
+ *
+ * This routine will mark all Event Queue Entries on @q, from the last
+ * known completed entry to the last entry that was processed, as completed
+ * by clearing the valid bit for each completion queue entry. Then it will
+ * notify the HBA, by ringing the doorbell, that the EQEs have been processed.
+ * The internal host index in the @q will be updated by this routine to indicate
+ * that the host has finished processing the entries. The @arm parameter
+ * indicates that the queue should be rearmed when ringing the doorbell.
+ *
+ * This function will return the number of EQEs that were popped.
+ **/
+uint32_t
+lpfc_sli4_eq_release(struct lpfc_queue *q, bool arm)
+{
+ uint32_t released = 0;
+ struct lpfc_eqe *temp_eqe;
+ struct lpfc_register doorbell;
+
+ /* while there are valid entries */
+ while (q->hba_index != q->host_index) {
+ temp_eqe = q->qe[q->host_index].eqe;
+ bf_set(lpfc_eqe_valid, temp_eqe, 0);
+ released++;
+ q->host_index = ((q->host_index + 1) % q->entry_count);
+ }
+ if (unlikely(released == 0 && !arm))
+ return 0;
+
+ /* ring doorbell for number popped */
+ doorbell.word0 = 0;
+ if (arm) {
+ bf_set(lpfc_eqcq_doorbell_arm, &doorbell, 1);
+ bf_set(lpfc_eqcq_doorbell_eqci, &doorbell, 1);
+ }
+ bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, released);
+ bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_EVENT);
+ bf_set(lpfc_eqcq_doorbell_eqid, &doorbell, q->queue_id);
+ writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
+ return released;
+}
+
+/**
+ * lpfc_sli4_cq_get - Gets the next valid CQE from a CQ
+ * @q: The Completion Queue to get the first valid CQE from
+ *
+ * This routine will get the first valid Completion Queue Entry from @q, update
+ * the queue's internal hba index, and return the CQE. If no valid CQEs are in
+ * the Queue (no more work to do), or the Queue is full of CQEs that have been
+ * processed, but not popped back to the HBA then this routine will return NULL.
+ **/
+static struct lpfc_cqe *
+lpfc_sli4_cq_get(struct lpfc_queue *q)
+{
+ struct lpfc_cqe *cqe;
+
+ /* If the next CQE is not valid then we are done */
+ if (!bf_get(lpfc_cqe_valid, q->qe[q->hba_index].cqe))
+ return NULL;
+ /* If the host has not yet processed the next entry then we are done */
+ if (((q->hba_index + 1) % q->entry_count) == q->host_index)
+ return NULL;
+
+ cqe = q->qe[q->hba_index].cqe;
+ q->hba_index = ((q->hba_index + 1) % q->entry_count);
+ return cqe;
+}
+
+/**
+ * lpfc_sli4_cq_release - Indicates the host has finished processing a CQ
+ * @q: The Completion Queue that the host has completed processing for.
+ * @arm: Indicates whether the host wants to arms this CQ.
+ *
+ * This routine will mark all Completion queue entries on @q, from the last
+ * known completed entry to the last entry that was processed, as completed
+ * by clearing the valid bit for each completion queue entry. Then it will
+ * notify the HBA, by ringing the doorbell, that the CQEs have been processed.
+ * The internal host index in the @q will be updated by this routine to indicate
+ * that the host has finished processing the entries. The @arm parameter
+ * indicates that the queue should be rearmed when ringing the doorbell.
+ *
+ * This function will return the number of CQEs that were released.
+ **/
+uint32_t
+lpfc_sli4_cq_release(struct lpfc_queue *q, bool arm)
+{
+ uint32_t released = 0;
+ struct lpfc_cqe *temp_qe;
+ struct lpfc_register doorbell;
+
+ /* while there are valid entries */
+ while (q->hba_index != q->host_index) {
+ temp_qe = q->qe[q->host_index].cqe;
+ bf_set(lpfc_cqe_valid, temp_qe, 0);
+ released++;
+ q->host_index = ((q->host_index + 1) % q->entry_count);
+ }
+ if (unlikely(released == 0 && !arm))
+ return 0;
+
+ /* ring doorbell for number popped */
+ doorbell.word0 = 0;
+ if (arm)
+ bf_set(lpfc_eqcq_doorbell_arm, &doorbell, 1);
+ bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, released);
+ bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_COMPLETION);
+ bf_set(lpfc_eqcq_doorbell_cqid, &doorbell, q->queue_id);
+ writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
+ return released;
+}
+
+/**
+ * lpfc_sli4_rq_put - Put a Receive Buffer Queue Entry on a Receive Queue
+ * @q: The Header Receive Queue to operate on.
+ * @wqe: The Receive Queue Entry to put on the Receive queue.
+ *
+ * This routine will copy the contents of @wqe to the next available entry on
+ * the @q. This function will then ring the Receive Queue Doorbell to signal the
+ * HBA to start processing the Receive Queue Entry. This function returns the
+ * index that the rqe was copied to if successful. If no entries are available
+ * on @q then this function will return -ENOMEM.
+ * The caller is expected to hold the hbalock when calling this routine.
+ **/
+static int
+lpfc_sli4_rq_put(struct lpfc_queue *hq, struct lpfc_queue *dq,
+ struct lpfc_rqe *hrqe, struct lpfc_rqe *drqe)
+{
+ struct lpfc_rqe *temp_hrqe = hq->qe[hq->host_index].rqe;
+ struct lpfc_rqe *temp_drqe = dq->qe[dq->host_index].rqe;
+ struct lpfc_register doorbell;
+ int put_index = hq->host_index;
+
+ if (hq->type != LPFC_HRQ || dq->type != LPFC_DRQ)
+ return -EINVAL;
+ if (hq->host_index != dq->host_index)
+ return -EINVAL;
+ /* If the host has not yet processed the next entry then we are done */
+ if (((hq->host_index + 1) % hq->entry_count) == hq->hba_index)
+ return -EBUSY;
+ lpfc_sli_pcimem_bcopy(hrqe, temp_hrqe, hq->entry_size);
+ lpfc_sli_pcimem_bcopy(drqe, temp_drqe, dq->entry_size);
+
+ /* Update the host index to point to the next slot */
+ hq->host_index = ((hq->host_index + 1) % hq->entry_count);
+ dq->host_index = ((dq->host_index + 1) % dq->entry_count);
+
+ /* Ring The Header Receive Queue Doorbell */
+ if (!(hq->host_index % LPFC_RQ_POST_BATCH)) {
+ doorbell.word0 = 0;
+ bf_set(lpfc_rq_doorbell_num_posted, &doorbell,
+ LPFC_RQ_POST_BATCH);
+ bf_set(lpfc_rq_doorbell_id, &doorbell, hq->queue_id);
+ writel(doorbell.word0, hq->phba->sli4_hba.RQDBregaddr);
+ }
+ return put_index;
+}
+
+/**
+ * lpfc_sli4_rq_release - Updates internal hba index for RQ
+ * @q: The Header Receive Queue to operate on.
+ *
+ * This routine will update the HBA index of a queue to reflect consumption of
+ * one Receive Queue Entry by the HBA. When the HBA indicates that it has
+ * consumed an entry the host calls this function to update the queue's
+ * internal pointers. This routine returns the number of entries that were
+ * consumed by the HBA.
+ **/
+static uint32_t
+lpfc_sli4_rq_release(struct lpfc_queue *hq, struct lpfc_queue *dq)
+{
+ if ((hq->type != LPFC_HRQ) || (dq->type != LPFC_DRQ))
+ return 0;
+ hq->hba_index = ((hq->hba_index + 1) % hq->entry_count);
+ dq->hba_index = ((dq->hba_index + 1) % dq->entry_count);
+ return 1;
+}
+
/**
* lpfc_cmd_iocb - Get next command iocb entry in the ring
* @phba: Pointer to HBA context object.
@@ -121,6 +451,76 @@ __lpfc_sli_get_iocbq(struct lpfc_hba *phba)
}
/**
+ * __lpfc_clear_active_sglq - Remove the active sglq for this XRI.
+ * @phba: Pointer to HBA context object.
+ * @xritag: XRI value.
+ *
+ * This function clears the sglq pointer from the array of acive
+ * sglq's. The xritag that is passed in is used to index into the
+ * array. Before the xritag can be used it needs to be adjusted
+ * by subtracting the xribase.
+ *
+ * Returns sglq ponter = success, NULL = Failure.
+ **/
+static struct lpfc_sglq *
+__lpfc_clear_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
+{
+ uint16_t adj_xri;
+ struct lpfc_sglq *sglq;
+ adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
+ if (adj_xri > phba->sli4_hba.max_cfg_param.max_xri)
+ return NULL;
+ sglq = phba->sli4_hba.lpfc_sglq_active_list[adj_xri];
+ phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = NULL;
+ return sglq;
+}
+
+/**
+ * __lpfc_get_active_sglq - Get the active sglq for this XRI.
+ * @phba: Pointer to HBA context object.
+ * @xritag: XRI value.
+ *
+ * This function returns the sglq pointer from the array of acive
+ * sglq's. The xritag that is passed in is used to index into the
+ * array. Before the xritag can be used it needs to be adjusted
+ * by subtracting the xribase.
+ *
+ * Returns sglq ponter = success, NULL = Failure.
+ **/
+static struct lpfc_sglq *
+__lpfc_get_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
+{
+ uint16_t adj_xri;
+ struct lpfc_sglq *sglq;
+ adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
+ if (adj_xri > phba->sli4_hba.max_cfg_param.max_xri)
+ return NULL;
+ sglq = phba->sli4_hba.lpfc_sglq_active_list[adj_xri];
+ return sglq;
+}
+
+/**
+ * __lpfc_sli_get_sglq - Allocates an iocb object from sgl pool
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called with hbalock held. This function
+ * Gets a new driver sglq object from the sglq list. If the
+ * list is not empty then it is successful, it returns pointer to the newly
+ * allocated sglq object else it returns NULL.
+ **/
+static struct lpfc_sglq *
+__lpfc_sli_get_sglq(struct lpfc_hba *phba)
+{
+ struct list_head *lpfc_sgl_list = &phba->sli4_hba.lpfc_sgl_list;
+ struct lpfc_sglq *sglq = NULL;
+ uint16_t adj_xri;
+ list_remove_head(lpfc_sgl_list, sglq, struct lpfc_sglq, list);
+ adj_xri = sglq->sli4_xritag - phba->sli4_hba.max_cfg_param.xri_base;
+ phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = sglq;
+ return sglq;
+}
+
+/**
* lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool
* @phba: Pointer to HBA context object.
*
@@ -142,7 +542,7 @@ lpfc_sli_get_iocbq(struct lpfc_hba *phba)
}
/**
- * __lpfc_sli_release_iocbq - Release iocb to the iocb pool
+ * __lpfc_sli_release_iocbq_s4 - Release iocb to the iocb pool
* @phba: Pointer to HBA context object.
* @iocbq: Pointer to driver iocb object.
*
@@ -150,9 +550,62 @@ lpfc_sli_get_iocbq(struct lpfc_hba *phba)
* iocb object to the iocb pool. The iotag in the iocb object
* does not change for each use of the iocb object. This function
* clears all other fields of the iocb object when it is freed.
+ * The sqlq structure that holds the xritag and phys and virtual
+ * mappings for the scatter gather list is retrieved from the
+ * active array of sglq. The get of the sglq pointer also clears
+ * the entry in the array. If the status of the IO indiactes that
+ * this IO was aborted then the sglq entry it put on the
+ * lpfc_abts_els_sgl_list until the CQ_ABORTED_XRI is received. If the
+ * IO has good status or fails for any other reason then the sglq
+ * entry is added to the free list (lpfc_sgl_list).
**/
static void
-__lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
+__lpfc_sli_release_iocbq_s4(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
+{
+ struct lpfc_sglq *sglq;
+ size_t start_clean = offsetof(struct lpfc_iocbq, iocb);
+ unsigned long iflag;
+
+ if (iocbq->sli4_xritag == NO_XRI)
+ sglq = NULL;
+ else
+ sglq = __lpfc_clear_active_sglq(phba, iocbq->sli4_xritag);
+ if (sglq) {
+ if (iocbq->iocb_flag & LPFC_DRIVER_ABORTED
+ || ((iocbq->iocb.ulpStatus == IOSTAT_LOCAL_REJECT)
+ && (iocbq->iocb.un.ulpWord[4]
+ == IOERR_SLI_ABORTED))) {
+ spin_lock_irqsave(&phba->sli4_hba.abts_sgl_list_lock,
+ iflag);
+ list_add(&sglq->list,
+ &phba->sli4_hba.lpfc_abts_els_sgl_list);
+ spin_unlock_irqrestore(
+ &phba->sli4_hba.abts_sgl_list_lock, iflag);
+ } else
+ list_add(&sglq->list, &phba->sli4_hba.lpfc_sgl_list);
+ }
+
+
+ /*
+ * Clean all volatile data fields, preserve iotag and node struct.
+ */
+ memset((char *)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean);
+ iocbq->sli4_xritag = NO_XRI;
+ list_add_tail(&iocbq->list, &phba->lpfc_iocb_list);
+}
+
+/**
+ * __lpfc_sli_release_iocbq_s3 - Release iocb to the iocb pool
+ * @phba: Pointer to HBA context object.
+ * @iocbq: Pointer to driver iocb object.
+ *
+ * This function is called with hbalock held to release driver
+ * iocb object to the iocb pool. The iotag in the iocb object
+ * does not change for each use of the iocb object. This function
+ * clears all other fields of the iocb object when it is freed.
+ **/
+static void
+__lpfc_sli_release_iocbq_s3(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
{
size_t start_clean = offsetof(struct lpfc_iocbq, iocb);
@@ -160,10 +613,27 @@ __lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
* Clean all volatile data fields, preserve iotag and node struct.
*/
memset((char*)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean);
+ iocbq->sli4_xritag = NO_XRI;
list_add_tail(&iocbq->list, &phba->lpfc_iocb_list);
}
/**
+ * __lpfc_sli_release_iocbq - Release iocb to the iocb pool
+ * @phba: Pointer to HBA context object.
+ * @iocbq: Pointer to driver iocb object.
+ *
+ * This function is called with hbalock held to release driver
+ * iocb object to the iocb pool. The iotag in the iocb object
+ * does not change for each use of the iocb object. This function
+ * clears all other fields of the iocb object when it is freed.
+ **/
+static void
+__lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
+{
+ phba->__lpfc_sli_release_iocbq(phba, iocbq);
+}
+
+/**
* lpfc_sli_release_iocbq - Release iocb to the iocb pool
* @phba: Pointer to HBA context object.
* @iocbq: Pointer to driver iocb object.
@@ -281,6 +751,14 @@ lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd)
case CMD_GEN_REQUEST64_CR:
case CMD_GEN_REQUEST64_CX:
case CMD_XMIT_ELS_RSP64_CX:
+ case DSSCMD_IWRITE64_CR:
+ case DSSCMD_IWRITE64_CX:
+ case DSSCMD_IREAD64_CR:
+ case DSSCMD_IREAD64_CX:
+ case DSSCMD_INVALIDATE_DEK:
+ case DSSCMD_SET_KEK:
+ case DSSCMD_GET_KEK_ID:
+ case DSSCMD_GEN_XFER:
type = LPFC_SOL_IOCB;
break;
case CMD_ABORT_XRI_CN:
@@ -348,7 +826,7 @@ lpfc_sli_ring_map(struct lpfc_hba *phba)
pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmb)
return -ENOMEM;
- pmbox = &pmb->mb;
+ pmbox = &pmb->u.mb;
phba->link_state = LPFC_INIT_MBX_CMDS;
for (i = 0; i < psli->num_rings; i++) {
lpfc_config_ring(phba, i, pmb);
@@ -779,8 +1257,8 @@ lpfc_sli_hbqbuf_free_all(struct lpfc_hba *phba)
phba->hbqs[i].buffer_count = 0;
}
/* Return all HBQ buffer that are in-fly */
- list_for_each_entry_safe(dmabuf, next_dmabuf,
- &phba->hbqbuf_in_list, list) {
+ list_for_each_entry_safe(dmabuf, next_dmabuf, &phba->rb_pend_list,
+ list) {
hbq_buf = container_of(dmabuf, struct hbq_dmabuf, dbuf);
list_del(&hbq_buf->dbuf.list);
if (hbq_buf->tag == -1) {
@@ -814,10 +1292,28 @@ lpfc_sli_hbqbuf_free_all(struct lpfc_hba *phba)
* pointer to the hbq entry if it successfully post the buffer
* else it will return NULL.
**/
-static struct lpfc_hbq_entry *
+static int
lpfc_sli_hbq_to_firmware(struct lpfc_hba *phba, uint32_t hbqno,
struct hbq_dmabuf *hbq_buf)
{
+ return phba->lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buf);
+}
+
+/**
+ * lpfc_sli_hbq_to_firmware_s3 - Post the hbq buffer to SLI3 firmware
+ * @phba: Pointer to HBA context object.
+ * @hbqno: HBQ number.
+ * @hbq_buf: Pointer to HBQ buffer.
+ *
+ * This function is called with the hbalock held to post a hbq buffer to the
+ * firmware. If the function finds an empty slot in the HBQ, it will post the
+ * buffer and place it on the hbq_buffer_list. The function will return zero if
+ * it successfully post the buffer else it will return an error.
+ **/
+static int
+lpfc_sli_hbq_to_firmware_s3(struct lpfc_hba *phba, uint32_t hbqno,
+ struct hbq_dmabuf *hbq_buf)
+{
struct lpfc_hbq_entry *hbqe;
dma_addr_t physaddr = hbq_buf->dbuf.phys;
@@ -838,8 +1334,40 @@ lpfc_sli_hbq_to_firmware(struct lpfc_hba *phba, uint32_t hbqno,
/* flush */
readl(phba->hbq_put + hbqno);
list_add_tail(&hbq_buf->dbuf.list, &hbqp->hbq_buffer_list);
- }
- return hbqe;
+ return 0;
+ } else
+ return -ENOMEM;
+}
+
+/**
+ * lpfc_sli_hbq_to_firmware_s4 - Post the hbq buffer to SLI4 firmware
+ * @phba: Pointer to HBA context object.
+ * @hbqno: HBQ number.
+ * @hbq_buf: Pointer to HBQ buffer.
+ *
+ * This function is called with the hbalock held to post an RQE to the SLI4
+ * firmware. If able to post the RQE to the RQ it will queue the hbq entry to
+ * the hbq_buffer_list and return zero, otherwise it will return an error.
+ **/
+static int
+lpfc_sli_hbq_to_firmware_s4(struct lpfc_hba *phba, uint32_t hbqno,
+ struct hbq_dmabuf *hbq_buf)
+{
+ int rc;
+ struct lpfc_rqe hrqe;
+ struct lpfc_rqe drqe;
+
+ hrqe.address_lo = putPaddrLow(hbq_buf->hbuf.phys);
+ hrqe.address_hi = putPaddrHigh(hbq_buf->hbuf.phys);
+ drqe.address_lo = putPaddrLow(hbq_buf->dbuf.phys);
+ drqe.address_hi = putPaddrHigh(hbq_buf->dbuf.phys);
+ rc = lpfc_sli4_rq_put(phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq,
+ &hrqe, &drqe);
+ if (rc < 0)
+ return rc;
+ hbq_buf->tag = rc;
+ list_add_tail(&hbq_buf->dbuf.list, &phba->hbqs[hbqno].hbq_buffer_list);
+ return 0;
}
/* HBQ for ELS and CT traffic. */
@@ -914,7 +1442,7 @@ lpfc_sli_hbqbuf_fill_hbqs(struct lpfc_hba *phba, uint32_t hbqno, uint32_t count)
dbuf.list);
hbq_buffer->tag = (phba->hbqs[hbqno].buffer_count |
(hbqno << 16));
- if (lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) {
+ if (!lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) {
phba->hbqs[hbqno].buffer_count++;
posted++;
} else
@@ -965,6 +1493,25 @@ lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *phba, uint32_t qno)
}
/**
+ * lpfc_sli_hbqbuf_get - Remove the first hbq off of an hbq list
+ * @phba: Pointer to HBA context object.
+ * @hbqno: HBQ number.
+ *
+ * This function removes the first hbq buffer on an hbq list and returns a
+ * pointer to that buffer. If it finds no buffers on the list it returns NULL.
+ **/
+static struct hbq_dmabuf *
+lpfc_sli_hbqbuf_get(struct list_head *rb_list)
+{
+ struct lpfc_dmabuf *d_buf;
+
+ list_remove_head(rb_list, d_buf, struct lpfc_dmabuf, list);
+ if (!d_buf)
+ return NULL;
+ return container_of(d_buf, struct hbq_dmabuf, dbuf);
+}
+
+/**
* lpfc_sli_hbqbuf_find - Find the hbq buffer associated with a tag
* @phba: Pointer to HBA context object.
* @tag: Tag of the hbq buffer.
@@ -985,12 +1532,15 @@ lpfc_sli_hbqbuf_find(struct lpfc_hba *phba, uint32_t tag)
if (hbqno >= LPFC_MAX_HBQS)
return NULL;
+ spin_lock_irq(&phba->hbalock);
list_for_each_entry(d_buf, &phba->hbqs[hbqno].hbq_buffer_list, list) {
hbq_buf = container_of(d_buf, struct hbq_dmabuf, dbuf);
if (hbq_buf->tag == tag) {
+ spin_unlock_irq(&phba->hbalock);
return hbq_buf;
}
}
+ spin_unlock_irq(&phba->hbalock);
lpfc_printf_log(phba, KERN_ERR, LOG_SLI | LOG_VPORT,
"1803 Bad hbq tag. Data: x%x x%x\n",
tag, phba->hbqs[tag >> 16].buffer_count);
@@ -1013,9 +1563,8 @@ lpfc_sli_free_hbq(struct lpfc_hba *phba, struct hbq_dmabuf *hbq_buffer)
if (hbq_buffer) {
hbqno = hbq_buffer->tag >> 16;
- if (!lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) {
+ if (lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer))
(phba->hbqs[hbqno].hbq_free_buffer)(phba, hbq_buffer);
- }
}
}
@@ -1086,6 +1635,15 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand)
case MBX_HEARTBEAT:
case MBX_PORT_CAPABILITIES:
case MBX_PORT_IOV_CONTROL:
+ case MBX_SLI4_CONFIG:
+ case MBX_SLI4_REQ_FTRS:
+ case MBX_REG_FCFI:
+ case MBX_UNREG_FCFI:
+ case MBX_REG_VFI:
+ case MBX_UNREG_VFI:
+ case MBX_INIT_VPI:
+ case MBX_INIT_VFI:
+ case MBX_RESUME_RPI:
ret = mbxCommand;
break;
default:
@@ -1106,7 +1664,7 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand)
* will wake up thread waiting on the wait queue pointed by context1
* of the mailbox.
**/
-static void
+void
lpfc_sli_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
{
wait_queue_head_t *pdone_q;
@@ -1140,7 +1698,7 @@ void
lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
struct lpfc_dmabuf *mp;
- uint16_t rpi;
+ uint16_t rpi, vpi;
int rc;
mp = (struct lpfc_dmabuf *) (pmb->context1);
@@ -1150,24 +1708,30 @@ lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
kfree(mp);
}
+ if ((pmb->u.mb.mbxCommand == MBX_UNREG_LOGIN) &&
+ (phba->sli_rev == LPFC_SLI_REV4))
+ lpfc_sli4_free_rpi(phba, pmb->u.mb.un.varUnregLogin.rpi);
+
/*
* If a REG_LOGIN succeeded after node is destroyed or node
* is in re-discovery driver need to cleanup the RPI.
*/
if (!(phba->pport->load_flag & FC_UNLOADING) &&
- pmb->mb.mbxCommand == MBX_REG_LOGIN64 &&
- !pmb->mb.mbxStatus) {
-
- rpi = pmb->mb.un.varWords[0];
- lpfc_unreg_login(phba, pmb->mb.un.varRegLogin.vpi, rpi, pmb);
+ pmb->u.mb.mbxCommand == MBX_REG_LOGIN64 &&
+ !pmb->u.mb.mbxStatus) {
+ rpi = pmb->u.mb.un.varWords[0];
+ vpi = pmb->u.mb.un.varRegLogin.vpi - phba->vpi_base;
+ lpfc_unreg_login(phba, vpi, rpi, pmb);
pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
if (rc != MBX_NOT_FINISHED)
return;
}
- mempool_free(pmb, phba->mbox_mem_pool);
- return;
+ if (bf_get(lpfc_mqe_command, &pmb->u.mqe) == MBX_SLI4_CONFIG)
+ lpfc_sli4_mbox_cmd_free(phba, pmb);
+ else
+ mempool_free(pmb, phba->mbox_mem_pool);
}
/**
@@ -1204,7 +1768,7 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba)
if (pmb == NULL)
break;
- pmbox = &pmb->mb;
+ pmbox = &pmb->u.mb;
if (pmbox->mbxCommand != MBX_HEARTBEAT) {
if (pmb->vport) {
@@ -1233,9 +1797,10 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba)
/* Unknow mailbox command compl */
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"(%d):0323 Unknown Mailbox command "
- "%x Cmpl\n",
+ "x%x (x%x) Cmpl\n",
pmb->vport ? pmb->vport->vpi : 0,
- pmbox->mbxCommand);
+ pmbox->mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, pmb));
phba->link_state = LPFC_HBA_ERROR;
phba->work_hs = HS_FFER3;
lpfc_handle_eratt(phba);
@@ -1250,29 +1815,29 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba)
LOG_MBOX | LOG_SLI,
"(%d):0305 Mbox cmd cmpl "
"error - RETRYing Data: x%x "
- "x%x x%x x%x\n",
+ "(x%x) x%x x%x x%x\n",
pmb->vport ? pmb->vport->vpi :0,
pmbox->mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba,
+ pmb),
pmbox->mbxStatus,
pmbox->un.varWords[0],
pmb->vport->port_state);
pmbox->mbxStatus = 0;
pmbox->mbxOwner = OWN_HOST;
- spin_lock_irq(&phba->hbalock);
- phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
- spin_unlock_irq(&phba->hbalock);
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
- if (rc == MBX_SUCCESS)
+ if (rc != MBX_NOT_FINISHED)
continue;
}
}
/* Mailbox cmd <cmd> Cmpl <cmpl> */
lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
- "(%d):0307 Mailbox cmd x%x Cmpl x%p "
+ "(%d):0307 Mailbox cmd x%x (x%x) Cmpl x%p "
"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x\n",
pmb->vport ? pmb->vport->vpi : 0,
pmbox->mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, pmb),
pmb->mbox_cmpl,
*((uint32_t *) pmbox),
pmbox->un.varWords[0],
@@ -1317,6 +1882,45 @@ lpfc_sli_get_buff(struct lpfc_hba *phba,
return &hbq_entry->dbuf;
}
+/**
+ * lpfc_complete_unsol_iocb - Complete an unsolicited sequence
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @saveq: Pointer to the iocbq struct representing the sequence starting frame.
+ * @fch_r_ctl: the r_ctl for the first frame of the sequence.
+ * @fch_type: the type for the first frame of the sequence.
+ *
+ * This function is called with no lock held. This function uses the r_ctl and
+ * type of the received sequence to find the correct callback function to call
+ * to process the sequence.
+ **/
+static int
+lpfc_complete_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+ struct lpfc_iocbq *saveq, uint32_t fch_r_ctl,
+ uint32_t fch_type)
+{
+ int i;
+
+ /* unSolicited Responses */
+ if (pring->prt[0].profile) {
+ if (pring->prt[0].lpfc_sli_rcv_unsol_event)
+ (pring->prt[0].lpfc_sli_rcv_unsol_event) (phba, pring,
+ saveq);
+ return 1;
+ }
+ /* We must search, based on rctl / type
+ for the right routine */
+ for (i = 0; i < pring->num_mask; i++) {
+ if ((pring->prt[i].rctl == fch_r_ctl) &&
+ (pring->prt[i].type == fch_type)) {
+ if (pring->prt[i].lpfc_sli_rcv_unsol_event)
+ (pring->prt[i].lpfc_sli_rcv_unsol_event)
+ (phba, pring, saveq);
+ return 1;
+ }
+ }
+ return 0;
+}
/**
* lpfc_sli_process_unsol_iocb - Unsolicited iocb handler
@@ -1339,7 +1943,7 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
IOCB_t * irsp;
WORD5 * w5p;
uint32_t Rctl, Type;
- uint32_t match, i;
+ uint32_t match;
struct lpfc_iocbq *iocbq;
struct lpfc_dmabuf *dmzbuf;
@@ -1482,35 +2086,12 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
}
}
- /* unSolicited Responses */
- if (pring->prt[0].profile) {
- if (pring->prt[0].lpfc_sli_rcv_unsol_event)
- (pring->prt[0].lpfc_sli_rcv_unsol_event) (phba, pring,
- saveq);
- match = 1;
- } else {
- /* We must search, based on rctl / type
- for the right routine */
- for (i = 0; i < pring->num_mask; i++) {
- if ((pring->prt[i].rctl == Rctl)
- && (pring->prt[i].type == Type)) {
- if (pring->prt[i].lpfc_sli_rcv_unsol_event)
- (pring->prt[i].lpfc_sli_rcv_unsol_event)
- (phba, pring, saveq);
- match = 1;
- break;
- }
- }
- }
- if (match == 0) {
- /* Unexpected Rctl / Type received */
- /* Ring <ringno> handler: unexpected
- Rctl <Rctl> Type <Type> received */
+ if (!lpfc_complete_unsol_iocb(phba, pring, saveq, Rctl, Type))
lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
"0313 Ring %d handler: unexpected Rctl x%x "
"Type x%x received\n",
pring->ringno, Rctl, Type);
- }
+
return 1;
}
@@ -1552,6 +2133,37 @@ lpfc_sli_iocbq_lookup(struct lpfc_hba *phba,
}
/**
+ * lpfc_sli_iocbq_lookup_by_tag - Find command iocb for the iotag
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @iotag: IOCB tag.
+ *
+ * This function looks up the iocb_lookup table to get the command iocb
+ * corresponding to the given iotag. This function is called with the
+ * hbalock held.
+ * This function returns the command iocb object if it finds the command
+ * iocb else returns NULL.
+ **/
+static struct lpfc_iocbq *
+lpfc_sli_iocbq_lookup_by_tag(struct lpfc_hba *phba,
+ struct lpfc_sli_ring *pring, uint16_t iotag)
+{
+ struct lpfc_iocbq *cmd_iocb;
+
+ if (iotag != 0 && iotag <= phba->sli.last_iotag) {
+ cmd_iocb = phba->sli.iocbq_lookup[iotag];
+ list_del_init(&cmd_iocb->list);
+ pring->txcmplq_cnt--;
+ return cmd_iocb;
+ }
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0372 iotag x%x is out off range: max iotag (x%x)\n",
+ iotag, phba->sli.last_iotag);
+ return NULL;
+}
+
+/**
* lpfc_sli_process_sol_iocb - process solicited iocb completion
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
@@ -1954,7 +2566,7 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba,
if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
(irsp->un.ulpWord[4] == IOERR_NO_RESOURCES)) {
spin_unlock_irqrestore(&phba->hbalock, iflag);
- lpfc_rampdown_queue_depth(phba);
+ phba->lpfc_rampdown_queue_depth(phba);
spin_lock_irqsave(&phba->hbalock, iflag);
}
@@ -2068,39 +2680,215 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba,
}
/**
- * lpfc_sli_handle_slow_ring_event - Handle ring events for non-FCP rings
+ * lpfc_sli_sp_handle_rspiocb - Handle slow-path response iocb
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @rspiocbp: Pointer to driver response IOCB object.
+ *
+ * This function is called from the worker thread when there is a slow-path
+ * response IOCB to process. This function chains all the response iocbs until
+ * seeing the iocb with the LE bit set. The function will call
+ * lpfc_sli_process_sol_iocb function if the response iocb indicates a
+ * completion of a command iocb. The function will call the
+ * lpfc_sli_process_unsol_iocb function if this is an unsolicited iocb.
+ * The function frees the resources or calls the completion handler if this
+ * iocb is an abort completion. The function returns NULL when the response
+ * iocb has the LE bit set and all the chained iocbs are processed, otherwise
+ * this function shall chain the iocb on to the iocb_continueq and return the
+ * response iocb passed in.
+ **/
+static struct lpfc_iocbq *
+lpfc_sli_sp_handle_rspiocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+ struct lpfc_iocbq *rspiocbp)
+{
+ struct lpfc_iocbq *saveq;
+ struct lpfc_iocbq *cmdiocbp;
+ struct lpfc_iocbq *next_iocb;
+ IOCB_t *irsp = NULL;
+ uint32_t free_saveq;
+ uint8_t iocb_cmd_type;
+ lpfc_iocb_type type;
+ unsigned long iflag;
+ int rc;
+
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ /* First add the response iocb to the countinueq list */
+ list_add_tail(&rspiocbp->list, &(pring->iocb_continueq));
+ pring->iocb_continueq_cnt++;
+
+ /* Now, determine whetehr the list is completed for processing */
+ irsp = &rspiocbp->iocb;
+ if (irsp->ulpLe) {
+ /*
+ * By default, the driver expects to free all resources
+ * associated with this iocb completion.
+ */
+ free_saveq = 1;
+ saveq = list_get_first(&pring->iocb_continueq,
+ struct lpfc_iocbq, list);
+ irsp = &(saveq->iocb);
+ list_del_init(&pring->iocb_continueq);
+ pring->iocb_continueq_cnt = 0;
+
+ pring->stats.iocb_rsp++;
+
+ /*
+ * If resource errors reported from HBA, reduce
+ * queuedepths of the SCSI device.
+ */
+ if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
+ (irsp->un.ulpWord[4] == IOERR_NO_RESOURCES)) {
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ phba->lpfc_rampdown_queue_depth(phba);
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ }
+
+ if (irsp->ulpStatus) {
+ /* Rsp ring <ringno> error: IOCB */
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "0328 Rsp Ring %d error: "
+ "IOCB Data: "
+ "x%x x%x x%x x%x "
+ "x%x x%x x%x x%x "
+ "x%x x%x x%x x%x "
+ "x%x x%x x%x x%x\n",
+ pring->ringno,
+ irsp->un.ulpWord[0],
+ irsp->un.ulpWord[1],
+ irsp->un.ulpWord[2],
+ irsp->un.ulpWord[3],
+ irsp->un.ulpWord[4],
+ irsp->un.ulpWord[5],
+ *(((uint32_t *) irsp) + 6),
+ *(((uint32_t *) irsp) + 7),
+ *(((uint32_t *) irsp) + 8),
+ *(((uint32_t *) irsp) + 9),
+ *(((uint32_t *) irsp) + 10),
+ *(((uint32_t *) irsp) + 11),
+ *(((uint32_t *) irsp) + 12),
+ *(((uint32_t *) irsp) + 13),
+ *(((uint32_t *) irsp) + 14),
+ *(((uint32_t *) irsp) + 15));
+ }
+
+ /*
+ * Fetch the IOCB command type and call the correct completion
+ * routine. Solicited and Unsolicited IOCBs on the ELS ring
+ * get freed back to the lpfc_iocb_list by the discovery
+ * kernel thread.
+ */
+ iocb_cmd_type = irsp->ulpCommand & CMD_IOCB_MASK;
+ type = lpfc_sli_iocb_cmd_type(iocb_cmd_type);
+ switch (type) {
+ case LPFC_SOL_IOCB:
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ rc = lpfc_sli_process_sol_iocb(phba, pring, saveq);
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ break;
+
+ case LPFC_UNSOL_IOCB:
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ rc = lpfc_sli_process_unsol_iocb(phba, pring, saveq);
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ if (!rc)
+ free_saveq = 0;
+ break;
+
+ case LPFC_ABORT_IOCB:
+ cmdiocbp = NULL;
+ if (irsp->ulpCommand != CMD_XRI_ABORTED_CX)
+ cmdiocbp = lpfc_sli_iocbq_lookup(phba, pring,
+ saveq);
+ if (cmdiocbp) {
+ /* Call the specified completion routine */
+ if (cmdiocbp->iocb_cmpl) {
+ spin_unlock_irqrestore(&phba->hbalock,
+ iflag);
+ (cmdiocbp->iocb_cmpl)(phba, cmdiocbp,
+ saveq);
+ spin_lock_irqsave(&phba->hbalock,
+ iflag);
+ } else
+ __lpfc_sli_release_iocbq(phba,
+ cmdiocbp);
+ }
+ break;
+
+ case LPFC_UNKNOWN_IOCB:
+ if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
+ char adaptermsg[LPFC_MAX_ADPTMSG];
+ memset(adaptermsg, 0, LPFC_MAX_ADPTMSG);
+ memcpy(&adaptermsg[0], (uint8_t *)irsp,
+ MAX_MSG_DATA);
+ dev_warn(&((phba->pcidev)->dev),
+ "lpfc%d: %s\n",
+ phba->brd_no, adaptermsg);
+ } else {
+ /* Unknown IOCB command */
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0335 Unknown IOCB "
+ "command Data: x%x "
+ "x%x x%x x%x\n",
+ irsp->ulpCommand,
+ irsp->ulpStatus,
+ irsp->ulpIoTag,
+ irsp->ulpContext);
+ }
+ break;
+ }
+
+ if (free_saveq) {
+ list_for_each_entry_safe(rspiocbp, next_iocb,
+ &saveq->list, list) {
+ list_del(&rspiocbp->list);
+ __lpfc_sli_release_iocbq(phba, rspiocbp);
+ }
+ __lpfc_sli_release_iocbq(phba, saveq);
+ }
+ rspiocbp = NULL;
+ }
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ return rspiocbp;
+}
+
+/**
+ * lpfc_sli_handle_slow_ring_event - Wrapper func for handling slow-path iocbs
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @mask: Host attention register mask for this ring.
*
- * This function is called from the worker thread when there is a ring
- * event for non-fcp rings. The caller does not hold any lock .
- * The function processes each response iocb in the response ring until it
- * finds an iocb with LE bit set and chains all the iocbs upto the iocb with
- * LE bit set. The function will call lpfc_sli_process_sol_iocb function if the
- * response iocb indicates a completion of a command iocb. The function
- * will call lpfc_sli_process_unsol_iocb function if this is an unsolicited
- * iocb. The function frees the resources or calls the completion handler if
- * this iocb is an abort completion. The function returns 0 when the allocated
- * iocbs are not freed, otherwise returns 1.
+ * This routine wraps the actual slow_ring event process routine from the
+ * API jump table function pointer from the lpfc_hba struct.
**/
-int
+void
lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
struct lpfc_sli_ring *pring, uint32_t mask)
{
+ phba->lpfc_sli_handle_slow_ring_event(phba, pring, mask);
+}
+
+/**
+ * lpfc_sli_handle_slow_ring_event_s3 - Handle SLI3 ring event for non-FCP rings
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @mask: Host attention register mask for this ring.
+ *
+ * This function is called from the worker thread when there is a ring event
+ * for non-fcp rings. The caller does not hold any lock. The function will
+ * remove each response iocb in the response ring and calls the handle
+ * response iocb routine (lpfc_sli_sp_handle_rspiocb) to process it.
+ **/
+static void
+lpfc_sli_handle_slow_ring_event_s3(struct lpfc_hba *phba,
+ struct lpfc_sli_ring *pring, uint32_t mask)
+{
struct lpfc_pgp *pgp;
IOCB_t *entry;
IOCB_t *irsp = NULL;
struct lpfc_iocbq *rspiocbp = NULL;
- struct lpfc_iocbq *next_iocb;
- struct lpfc_iocbq *cmdiocbp;
- struct lpfc_iocbq *saveq;
- uint8_t iocb_cmd_type;
- lpfc_iocb_type type;
- uint32_t status, free_saveq;
uint32_t portRspPut, portRspMax;
- int rc = 1;
unsigned long iflag;
+ uint32_t status;
pgp = &phba->port_gp[pring->ringno];
spin_lock_irqsave(&phba->hbalock, iflag);
@@ -2128,7 +2916,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
phba->work_hs = HS_FFER3;
lpfc_handle_eratt(phba);
- return 1;
+ return;
}
rmb();
@@ -2173,138 +2961,10 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
writel(pring->rspidx, &phba->host_gp[pring->ringno].rspGetInx);
- list_add_tail(&rspiocbp->list, &(pring->iocb_continueq));
-
- pring->iocb_continueq_cnt++;
- if (irsp->ulpLe) {
- /*
- * By default, the driver expects to free all resources
- * associated with this iocb completion.
- */
- free_saveq = 1;
- saveq = list_get_first(&pring->iocb_continueq,
- struct lpfc_iocbq, list);
- irsp = &(saveq->iocb);
- list_del_init(&pring->iocb_continueq);
- pring->iocb_continueq_cnt = 0;
-
- pring->stats.iocb_rsp++;
-
- /*
- * If resource errors reported from HBA, reduce
- * queuedepths of the SCSI device.
- */
- if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
- (irsp->un.ulpWord[4] == IOERR_NO_RESOURCES)) {
- spin_unlock_irqrestore(&phba->hbalock, iflag);
- lpfc_rampdown_queue_depth(phba);
- spin_lock_irqsave(&phba->hbalock, iflag);
- }
-
- if (irsp->ulpStatus) {
- /* Rsp ring <ringno> error: IOCB */
- lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
- "0328 Rsp Ring %d error: "
- "IOCB Data: "
- "x%x x%x x%x x%x "
- "x%x x%x x%x x%x "
- "x%x x%x x%x x%x "
- "x%x x%x x%x x%x\n",
- pring->ringno,
- irsp->un.ulpWord[0],
- irsp->un.ulpWord[1],
- irsp->un.ulpWord[2],
- irsp->un.ulpWord[3],
- irsp->un.ulpWord[4],
- irsp->un.ulpWord[5],
- *(((uint32_t *) irsp) + 6),
- *(((uint32_t *) irsp) + 7),
- *(((uint32_t *) irsp) + 8),
- *(((uint32_t *) irsp) + 9),
- *(((uint32_t *) irsp) + 10),
- *(((uint32_t *) irsp) + 11),
- *(((uint32_t *) irsp) + 12),
- *(((uint32_t *) irsp) + 13),
- *(((uint32_t *) irsp) + 14),
- *(((uint32_t *) irsp) + 15));
- }
-
- /*
- * Fetch the IOCB command type and call the correct
- * completion routine. Solicited and Unsolicited
- * IOCBs on the ELS ring get freed back to the
- * lpfc_iocb_list by the discovery kernel thread.
- */
- iocb_cmd_type = irsp->ulpCommand & CMD_IOCB_MASK;
- type = lpfc_sli_iocb_cmd_type(iocb_cmd_type);
- if (type == LPFC_SOL_IOCB) {
- spin_unlock_irqrestore(&phba->hbalock, iflag);
- rc = lpfc_sli_process_sol_iocb(phba, pring,
- saveq);
- spin_lock_irqsave(&phba->hbalock, iflag);
- } else if (type == LPFC_UNSOL_IOCB) {
- spin_unlock_irqrestore(&phba->hbalock, iflag);
- rc = lpfc_sli_process_unsol_iocb(phba, pring,
- saveq);
- spin_lock_irqsave(&phba->hbalock, iflag);
- if (!rc)
- free_saveq = 0;
- } else if (type == LPFC_ABORT_IOCB) {
- if ((irsp->ulpCommand != CMD_XRI_ABORTED_CX) &&
- ((cmdiocbp =
- lpfc_sli_iocbq_lookup(phba, pring,
- saveq)))) {
- /* Call the specified completion
- routine */
- if (cmdiocbp->iocb_cmpl) {
- spin_unlock_irqrestore(
- &phba->hbalock,
- iflag);
- (cmdiocbp->iocb_cmpl) (phba,
- cmdiocbp, saveq);
- spin_lock_irqsave(
- &phba->hbalock,
- iflag);
- } else
- __lpfc_sli_release_iocbq(phba,
- cmdiocbp);
- }
- } else if (type == LPFC_UNKNOWN_IOCB) {
- if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
-
- char adaptermsg[LPFC_MAX_ADPTMSG];
-
- memset(adaptermsg, 0,
- LPFC_MAX_ADPTMSG);
- memcpy(&adaptermsg[0], (uint8_t *) irsp,
- MAX_MSG_DATA);
- dev_warn(&((phba->pcidev)->dev),
- "lpfc%d: %s\n",
- phba->brd_no, adaptermsg);
- } else {
- /* Unknown IOCB command */
- lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "0335 Unknown IOCB "
- "command Data: x%x "
- "x%x x%x x%x\n",
- irsp->ulpCommand,
- irsp->ulpStatus,
- irsp->ulpIoTag,
- irsp->ulpContext);
- }
- }
-
- if (free_saveq) {
- list_for_each_entry_safe(rspiocbp, next_iocb,
- &saveq->list, list) {
- list_del(&rspiocbp->list);
- __lpfc_sli_release_iocbq(phba,
- rspiocbp);
- }
- __lpfc_sli_release_iocbq(phba, saveq);
- }
- rspiocbp = NULL;
- }
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ /* Handle the response IOCB */
+ rspiocbp = lpfc_sli_sp_handle_rspiocb(phba, pring, rspiocbp);
+ spin_lock_irqsave(&phba->hbalock, iflag);
/*
* If the port response put pointer has not been updated, sync
@@ -2338,7 +2998,37 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
}
spin_unlock_irqrestore(&phba->hbalock, iflag);
- return rc;
+ return;
+}
+
+/**
+ * lpfc_sli_handle_slow_ring_event_s4 - Handle SLI4 slow-path els events
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @mask: Host attention register mask for this ring.
+ *
+ * This function is called from the worker thread when there is a pending
+ * ELS response iocb on the driver internal slow-path response iocb worker
+ * queue. The caller does not hold any lock. The function will remove each
+ * response iocb from the response worker queue and calls the handle
+ * response iocb routine (lpfc_sli_sp_handle_rspiocb) to process it.
+ **/
+static void
+lpfc_sli_handle_slow_ring_event_s4(struct lpfc_hba *phba,
+ struct lpfc_sli_ring *pring, uint32_t mask)
+{
+ struct lpfc_iocbq *irspiocbq;
+ unsigned long iflag;
+
+ while (!list_empty(&phba->sli4_hba.sp_rspiocb_work_queue)) {
+ /* Get the response iocb from the head of work queue */
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ list_remove_head(&phba->sli4_hba.sp_rspiocb_work_queue,
+ irspiocbq, struct lpfc_iocbq, list);
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ /* Process the response iocb */
+ lpfc_sli_sp_handle_rspiocb(phba, pring, irspiocbq);
+ }
}
/**
@@ -2420,7 +3110,7 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba)
}
/**
- * lpfc_sli_brdready - Check for host status bits
+ * lpfc_sli_brdready_s3 - Check for sli3 host ready status
* @phba: Pointer to HBA context object.
* @mask: Bit mask to be checked.
*
@@ -2432,8 +3122,8 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba)
* function returns 1 when HBA fail to restart otherwise returns
* zero.
**/
-int
-lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask)
+static int
+lpfc_sli_brdready_s3(struct lpfc_hba *phba, uint32_t mask)
{
uint32_t status;
int i = 0;
@@ -2477,6 +3167,56 @@ lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask)
return retval;
}
+/**
+ * lpfc_sli_brdready_s4 - Check for sli4 host ready status
+ * @phba: Pointer to HBA context object.
+ * @mask: Bit mask to be checked.
+ *
+ * This function checks the host status register to check if HBA is
+ * ready. This function will wait in a loop for the HBA to be ready
+ * If the HBA is not ready , the function will will reset the HBA PCI
+ * function again. The function returns 1 when HBA fail to be ready
+ * otherwise returns zero.
+ **/
+static int
+lpfc_sli_brdready_s4(struct lpfc_hba *phba, uint32_t mask)
+{
+ uint32_t status;
+ int retval = 0;
+
+ /* Read the HBA Host Status Register */
+ status = lpfc_sli4_post_status_check(phba);
+
+ if (status) {
+ phba->pport->port_state = LPFC_VPORT_UNKNOWN;
+ lpfc_sli_brdrestart(phba);
+ status = lpfc_sli4_post_status_check(phba);
+ }
+
+ /* Check to see if any errors occurred during init */
+ if (status) {
+ phba->link_state = LPFC_HBA_ERROR;
+ retval = 1;
+ } else
+ phba->sli4_hba.intr_enable = 0;
+
+ return retval;
+}
+
+/**
+ * lpfc_sli_brdready - Wrapper func for checking the hba readyness
+ * @phba: Pointer to HBA context object.
+ * @mask: Bit mask to be checked.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba readyness check routine
+ * from the API jump table function pointer from the lpfc_hba struct.
+ **/
+int
+lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask)
+{
+ return phba->lpfc_sli_brdready(phba, mask);
+}
+
#define BARRIER_TEST_PATTERN (0xdeadbeef)
/**
@@ -2532,7 +3272,7 @@ void lpfc_reset_barrier(struct lpfc_hba *phba)
mdelay(1);
if (readl(resp_buf + 1) != ~(BARRIER_TEST_PATTERN)) {
- if (phba->sli.sli_flag & LPFC_SLI2_ACTIVE ||
+ if (phba->sli.sli_flag & LPFC_SLI_ACTIVE ||
phba->pport->stopped)
goto restore_hc;
else
@@ -2613,7 +3353,9 @@ lpfc_sli_brdkill(struct lpfc_hba *phba)
return 1;
}
- psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+ spin_lock_irq(&phba->hbalock);
+ psli->sli_flag &= ~LPFC_SLI_ACTIVE;
+ spin_unlock_irq(&phba->hbalock);
mempool_free(pmb, phba->mbox_mem_pool);
@@ -2636,10 +3378,10 @@ lpfc_sli_brdkill(struct lpfc_hba *phba)
}
spin_lock_irq(&phba->hbalock);
psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ psli->mbox_active = NULL;
phba->link_flag &= ~LS_IGNORE_ERATT;
spin_unlock_irq(&phba->hbalock);
- psli->mbox_active = NULL;
lpfc_hba_down_post(phba);
phba->link_state = LPFC_HBA_ERROR;
@@ -2647,7 +3389,7 @@ lpfc_sli_brdkill(struct lpfc_hba *phba)
}
/**
- * lpfc_sli_brdreset - Reset the HBA
+ * lpfc_sli_brdreset - Reset a sli-2 or sli-3 HBA
* @phba: Pointer to HBA context object.
*
* This function resets the HBA by writing HC_INITFF to the control
@@ -2683,7 +3425,8 @@ lpfc_sli_brdreset(struct lpfc_hba *phba)
(cfg_value &
~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
- psli->sli_flag &= ~(LPFC_SLI2_ACTIVE | LPFC_PROCESS_LA);
+ psli->sli_flag &= ~(LPFC_SLI_ACTIVE | LPFC_PROCESS_LA);
+
/* Now toggle INITFF bit in the Host Control Register */
writel(HC_INITFF, phba->HCregaddr);
mdelay(1);
@@ -2710,7 +3453,66 @@ lpfc_sli_brdreset(struct lpfc_hba *phba)
}
/**
- * lpfc_sli_brdrestart - Restart the HBA
+ * lpfc_sli4_brdreset - Reset a sli-4 HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function resets a SLI4 HBA. This function disables PCI layer parity
+ * checking during resets the device. The caller is not required to hold
+ * any locks.
+ *
+ * This function returns 0 always.
+ **/
+int
+lpfc_sli4_brdreset(struct lpfc_hba *phba)
+{
+ struct lpfc_sli *psli = &phba->sli;
+ uint16_t cfg_value;
+ uint8_t qindx;
+
+ /* Reset HBA */
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "0295 Reset HBA Data: x%x x%x\n",
+ phba->pport->port_state, psli->sli_flag);
+
+ /* perform board reset */
+ phba->fc_eventTag = 0;
+ phba->pport->fc_myDID = 0;
+ phba->pport->fc_prevDID = 0;
+
+ /* Turn off parity checking and serr during the physical reset */
+ pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value);
+ pci_write_config_word(phba->pcidev, PCI_COMMAND,
+ (cfg_value &
+ ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
+
+ spin_lock_irq(&phba->hbalock);
+ psli->sli_flag &= ~(LPFC_PROCESS_LA);
+ phba->fcf.fcf_flag = 0;
+ /* Clean up the child queue list for the CQs */
+ list_del_init(&phba->sli4_hba.mbx_wq->list);
+ list_del_init(&phba->sli4_hba.els_wq->list);
+ list_del_init(&phba->sli4_hba.hdr_rq->list);
+ list_del_init(&phba->sli4_hba.dat_rq->list);
+ list_del_init(&phba->sli4_hba.mbx_cq->list);
+ list_del_init(&phba->sli4_hba.els_cq->list);
+ list_del_init(&phba->sli4_hba.rxq_cq->list);
+ for (qindx = 0; qindx < phba->cfg_fcp_wq_count; qindx++)
+ list_del_init(&phba->sli4_hba.fcp_wq[qindx]->list);
+ for (qindx = 0; qindx < phba->cfg_fcp_eq_count; qindx++)
+ list_del_init(&phba->sli4_hba.fcp_cq[qindx]->list);
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Now physically reset the device */
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0389 Performing PCI function reset!\n");
+ /* Perform FCoE PCI function reset */
+ lpfc_pci_function_reset(phba);
+
+ return 0;
+}
+
+/**
+ * lpfc_sli_brdrestart_s3 - Restart a sli-3 hba
* @phba: Pointer to HBA context object.
*
* This function is called in the SLI initialization code path to
@@ -2722,8 +3524,8 @@ lpfc_sli_brdreset(struct lpfc_hba *phba)
* The function does not guarantee completion of MBX_RESTART mailbox
* command before the return of this function.
**/
-int
-lpfc_sli_brdrestart(struct lpfc_hba *phba)
+static int
+lpfc_sli_brdrestart_s3(struct lpfc_hba *phba)
{
MAILBOX_t *mb;
struct lpfc_sli *psli;
@@ -2762,7 +3564,7 @@ lpfc_sli_brdrestart(struct lpfc_hba *phba)
lpfc_sli_brdreset(phba);
phba->pport->stopped = 0;
phba->link_state = LPFC_INIT_START;
-
+ phba->hba_flag = 0;
spin_unlock_irq(&phba->hbalock);
memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets));
@@ -2777,6 +3579,55 @@ lpfc_sli_brdrestart(struct lpfc_hba *phba)
}
/**
+ * lpfc_sli_brdrestart_s4 - Restart the sli-4 hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called in the SLI initialization code path to restart
+ * a SLI4 HBA. The caller is not required to hold any lock.
+ * At the end of the function, it calls lpfc_hba_down_post function to
+ * free any pending commands.
+ **/
+static int
+lpfc_sli_brdrestart_s4(struct lpfc_hba *phba)
+{
+ struct lpfc_sli *psli = &phba->sli;
+
+
+ /* Restart HBA */
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "0296 Restart HBA Data: x%x x%x\n",
+ phba->pport->port_state, psli->sli_flag);
+
+ lpfc_sli4_brdreset(phba);
+
+ spin_lock_irq(&phba->hbalock);
+ phba->pport->stopped = 0;
+ phba->link_state = LPFC_INIT_START;
+ phba->hba_flag = 0;
+ spin_unlock_irq(&phba->hbalock);
+
+ memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets));
+ psli->stats_start = get_seconds();
+
+ lpfc_hba_down_post(phba);
+
+ return 0;
+}
+
+/**
+ * lpfc_sli_brdrestart - Wrapper func for restarting hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba restart routine from the
+ * API jump table function pointer from the lpfc_hba struct.
+**/
+int
+lpfc_sli_brdrestart(struct lpfc_hba *phba)
+{
+ return phba->lpfc_sli_brdrestart(phba);
+}
+
+/**
* lpfc_sli_chipset_init - Wait for the restart of the HBA after a restart
* @phba: Pointer to HBA context object.
*
@@ -2940,7 +3791,7 @@ lpfc_sli_hbq_setup(struct lpfc_hba *phba)
if (!pmb)
return -ENOMEM;
- pmbox = &pmb->mb;
+ pmbox = &pmb->u.mb;
/* Initialize the struct lpfc_sli_hbq structure for each hbq */
phba->link_state = LPFC_INIT_MBX_CMDS;
@@ -2984,6 +3835,26 @@ lpfc_sli_hbq_setup(struct lpfc_hba *phba)
}
/**
+ * lpfc_sli4_rb_setup - Initialize and post RBs to HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called during the SLI initialization to configure
+ * all the HBQs and post buffers to the HBQ. The caller is not
+ * required to hold any locks. This function will return zero if successful
+ * else it will return negative error code.
+ **/
+static int
+lpfc_sli4_rb_setup(struct lpfc_hba *phba)
+{
+ phba->hbq_in_use = 1;
+ phba->hbqs[0].entry_count = lpfc_hbq_defs[0]->entry_count;
+ phba->hbq_count = 1;
+ /* Initially populate or replenish the HBQs */
+ lpfc_sli_hbqbuf_init_hbqs(phba, 0);
+ return 0;
+}
+
+/**
* lpfc_sli_config_port - Issue config port mailbox command
* @phba: Pointer to HBA context object.
* @sli_mode: sli mode - 2/3
@@ -3047,33 +3918,43 @@ lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode)
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0442 Adapter failed to init, mbxCmd x%x "
"CONFIG_PORT, mbxStatus x%x Data: x%x\n",
- pmb->mb.mbxCommand, pmb->mb.mbxStatus, 0);
+ pmb->u.mb.mbxCommand, pmb->u.mb.mbxStatus, 0);
spin_lock_irq(&phba->hbalock);
- phba->sli.sli_flag &= ~LPFC_SLI2_ACTIVE;
+ phba->sli.sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
rc = -ENXIO;
- } else
+ } else {
+ /* Allow asynchronous mailbox command to go through */
+ spin_lock_irq(&phba->hbalock);
+ phba->sli.sli_flag &= ~LPFC_SLI_ASYNC_MBX_BLK;
+ spin_unlock_irq(&phba->hbalock);
done = 1;
+ }
}
if (!done) {
rc = -EINVAL;
goto do_prep_failed;
}
- if (pmb->mb.un.varCfgPort.sli_mode == 3) {
- if (!pmb->mb.un.varCfgPort.cMA) {
+ if (pmb->u.mb.un.varCfgPort.sli_mode == 3) {
+ if (!pmb->u.mb.un.varCfgPort.cMA) {
rc = -ENXIO;
goto do_prep_failed;
}
- if (phba->max_vpi && pmb->mb.un.varCfgPort.gmv) {
+ if (phba->max_vpi && pmb->u.mb.un.varCfgPort.gmv) {
phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED;
- phba->max_vpi = pmb->mb.un.varCfgPort.max_vpi;
+ phba->max_vpi = pmb->u.mb.un.varCfgPort.max_vpi;
+ phba->max_vports = (phba->max_vpi > phba->max_vports) ?
+ phba->max_vpi : phba->max_vports;
+
} else
phba->max_vpi = 0;
- if (pmb->mb.un.varCfgPort.gerbm)
+ if (pmb->u.mb.un.varCfgPort.gdss)
+ phba->sli3_options |= LPFC_SLI3_DSS_ENABLED;
+ if (pmb->u.mb.un.varCfgPort.gerbm)
phba->sli3_options |= LPFC_SLI3_HBQ_ENABLED;
- if (pmb->mb.un.varCfgPort.gcrp)
+ if (pmb->u.mb.un.varCfgPort.gcrp)
phba->sli3_options |= LPFC_SLI3_CRP_ENABLED;
- if (pmb->mb.un.varCfgPort.ginb) {
+ if (pmb->u.mb.un.varCfgPort.ginb) {
phba->sli3_options |= LPFC_SLI3_INB_ENABLED;
phba->hbq_get = phba->mbox->us.s3_inb_pgp.hbq_get;
phba->port_gp = phba->mbox->us.s3_inb_pgp.port;
@@ -3089,7 +3970,7 @@ lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode)
}
if (phba->cfg_enable_bg) {
- if (pmb->mb.un.varCfgPort.gbg)
+ if (pmb->u.mb.un.varCfgPort.gbg)
phba->sli3_options |= LPFC_SLI3_BG_ENABLED;
else
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -3184,8 +4065,9 @@ lpfc_sli_hba_setup(struct lpfc_hba *phba)
if (rc)
goto lpfc_sli_hba_setup_error;
}
-
+ spin_lock_irq(&phba->hbalock);
phba->sli.sli_flag |= LPFC_PROCESS_LA;
+ spin_unlock_irq(&phba->hbalock);
rc = lpfc_config_port_post(phba);
if (rc)
@@ -3200,6 +4082,488 @@ lpfc_sli_hba_setup_error:
return rc;
}
+/**
+ * lpfc_sli4_read_fcoe_params - Read fcoe params from conf region
+ * @phba: Pointer to HBA context object.
+ * @mboxq: mailbox pointer.
+ * This function issue a dump mailbox command to read config region
+ * 23 and parse the records in the region and populate driver
+ * data structure.
+ **/
+static int
+lpfc_sli4_read_fcoe_params(struct lpfc_hba *phba,
+ LPFC_MBOXQ_t *mboxq)
+{
+ struct lpfc_dmabuf *mp;
+ struct lpfc_mqe *mqe;
+ uint32_t data_length;
+ int rc;
+
+ /* Program the default value of vlan_id and fc_map */
+ phba->valid_vlan = 0;
+ phba->fc_map[0] = LPFC_FCOE_FCF_MAP0;
+ phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
+ phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
+
+ mqe = &mboxq->u.mqe;
+ if (lpfc_dump_fcoe_param(phba, mboxq))
+ return -ENOMEM;
+
+ mp = (struct lpfc_dmabuf *) mboxq->context1;
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+ "(%d):2571 Mailbox cmd x%x Status x%x "
+ "Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+ "x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+ "CQ: x%x x%x x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ bf_get(lpfc_mqe_command, mqe),
+ bf_get(lpfc_mqe_status, mqe),
+ mqe->un.mb_words[0], mqe->un.mb_words[1],
+ mqe->un.mb_words[2], mqe->un.mb_words[3],
+ mqe->un.mb_words[4], mqe->un.mb_words[5],
+ mqe->un.mb_words[6], mqe->un.mb_words[7],
+ mqe->un.mb_words[8], mqe->un.mb_words[9],
+ mqe->un.mb_words[10], mqe->un.mb_words[11],
+ mqe->un.mb_words[12], mqe->un.mb_words[13],
+ mqe->un.mb_words[14], mqe->un.mb_words[15],
+ mqe->un.mb_words[16], mqe->un.mb_words[50],
+ mboxq->mcqe.word0,
+ mboxq->mcqe.mcqe_tag0, mboxq->mcqe.mcqe_tag1,
+ mboxq->mcqe.trailer);
+
+ if (rc) {
+ lpfc_mbuf_free(phba, mp->virt, mp->phys);
+ kfree(mp);
+ return -EIO;
+ }
+ data_length = mqe->un.mb_words[5];
+ if (data_length > DMP_FCOEPARAM_RGN_SIZE)
+ return -EIO;
+
+ lpfc_parse_fcoe_conf(phba, mp->virt, data_length);
+ lpfc_mbuf_free(phba, mp->virt, mp->phys);
+ kfree(mp);
+ return 0;
+}
+
+/**
+ * lpfc_sli4_read_rev - Issue READ_REV and collect vpd data
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to the LPFC_MBOXQ_t structure.
+ * @vpd: pointer to the memory to hold resulting port vpd data.
+ * @vpd_size: On input, the number of bytes allocated to @vpd.
+ * On output, the number of data bytes in @vpd.
+ *
+ * This routine executes a READ_REV SLI4 mailbox command. In
+ * addition, this routine gets the port vpd data.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - could not allocated memory.
+ **/
+static int
+lpfc_sli4_read_rev(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
+ uint8_t *vpd, uint32_t *vpd_size)
+{
+ int rc = 0;
+ uint32_t dma_size;
+ struct lpfc_dmabuf *dmabuf;
+ struct lpfc_mqe *mqe;
+
+ dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (!dmabuf)
+ return -ENOMEM;
+
+ /*
+ * Get a DMA buffer for the vpd data resulting from the READ_REV
+ * mailbox command.
+ */
+ dma_size = *vpd_size;
+ dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+ dma_size,
+ &dmabuf->phys,
+ GFP_KERNEL);
+ if (!dmabuf->virt) {
+ kfree(dmabuf);
+ return -ENOMEM;
+ }
+ memset(dmabuf->virt, 0, dma_size);
+
+ /*
+ * The SLI4 implementation of READ_REV conflicts at word1,
+ * bits 31:16 and SLI4 adds vpd functionality not present
+ * in SLI3. This code corrects the conflicts.
+ */
+ lpfc_read_rev(phba, mboxq);
+ mqe = &mboxq->u.mqe;
+ mqe->un.read_rev.vpd_paddr_high = putPaddrHigh(dmabuf->phys);
+ mqe->un.read_rev.vpd_paddr_low = putPaddrLow(dmabuf->phys);
+ mqe->un.read_rev.word1 &= 0x0000FFFF;
+ bf_set(lpfc_mbx_rd_rev_vpd, &mqe->un.read_rev, 1);
+ bf_set(lpfc_mbx_rd_rev_avail_len, &mqe->un.read_rev, dma_size);
+
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ if (rc) {
+ dma_free_coherent(&phba->pcidev->dev, dma_size,
+ dmabuf->virt, dmabuf->phys);
+ return -EIO;
+ }
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+ "(%d):0380 Mailbox cmd x%x Status x%x "
+ "Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+ "x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+ "CQ: x%x x%x x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ bf_get(lpfc_mqe_command, mqe),
+ bf_get(lpfc_mqe_status, mqe),
+ mqe->un.mb_words[0], mqe->un.mb_words[1],
+ mqe->un.mb_words[2], mqe->un.mb_words[3],
+ mqe->un.mb_words[4], mqe->un.mb_words[5],
+ mqe->un.mb_words[6], mqe->un.mb_words[7],
+ mqe->un.mb_words[8], mqe->un.mb_words[9],
+ mqe->un.mb_words[10], mqe->un.mb_words[11],
+ mqe->un.mb_words[12], mqe->un.mb_words[13],
+ mqe->un.mb_words[14], mqe->un.mb_words[15],
+ mqe->un.mb_words[16], mqe->un.mb_words[50],
+ mboxq->mcqe.word0,
+ mboxq->mcqe.mcqe_tag0, mboxq->mcqe.mcqe_tag1,
+ mboxq->mcqe.trailer);
+
+ /*
+ * The available vpd length cannot be bigger than the
+ * DMA buffer passed to the port. Catch the less than
+ * case and update the caller's size.
+ */
+ if (mqe->un.read_rev.avail_vpd_len < *vpd_size)
+ *vpd_size = mqe->un.read_rev.avail_vpd_len;
+
+ lpfc_sli_pcimem_bcopy(dmabuf->virt, vpd, *vpd_size);
+ dma_free_coherent(&phba->pcidev->dev, dma_size,
+ dmabuf->virt, dmabuf->phys);
+ kfree(dmabuf);
+ return 0;
+}
+
+/**
+ * lpfc_sli4_arm_cqeq_intr - Arm sli-4 device completion and event queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to explicitly arm the SLI4 device's completion and
+ * event queues
+ **/
+static void
+lpfc_sli4_arm_cqeq_intr(struct lpfc_hba *phba)
+{
+ uint8_t fcp_eqidx;
+
+ lpfc_sli4_cq_release(phba->sli4_hba.mbx_cq, LPFC_QUEUE_REARM);
+ lpfc_sli4_cq_release(phba->sli4_hba.els_cq, LPFC_QUEUE_REARM);
+ lpfc_sli4_cq_release(phba->sli4_hba.rxq_cq, LPFC_QUEUE_REARM);
+ for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++)
+ lpfc_sli4_cq_release(phba->sli4_hba.fcp_cq[fcp_eqidx],
+ LPFC_QUEUE_REARM);
+ lpfc_sli4_eq_release(phba->sli4_hba.sp_eq, LPFC_QUEUE_REARM);
+ for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++)
+ lpfc_sli4_eq_release(phba->sli4_hba.fp_eq[fcp_eqidx],
+ LPFC_QUEUE_REARM);
+}
+
+/**
+ * lpfc_sli4_hba_setup - SLI4 device intialization PCI function
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is the main SLI4 device intialization PCI function. This
+ * function is called by the HBA intialization code, HBA reset code and
+ * HBA error attention handler code. Caller is not required to hold any
+ * locks.
+ **/
+int
+lpfc_sli4_hba_setup(struct lpfc_hba *phba)
+{
+ int rc;
+ LPFC_MBOXQ_t *mboxq;
+ struct lpfc_mqe *mqe;
+ uint8_t *vpd;
+ uint32_t vpd_size;
+ uint32_t ftr_rsp = 0;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(phba->pport);
+ struct lpfc_vport *vport = phba->pport;
+ struct lpfc_dmabuf *mp;
+
+ /* Perform a PCI function reset to start from clean */
+ rc = lpfc_pci_function_reset(phba);
+ if (unlikely(rc))
+ return -ENODEV;
+
+ /* Check the HBA Host Status Register for readyness */
+ rc = lpfc_sli4_post_status_check(phba);
+ if (unlikely(rc))
+ return -ENODEV;
+ else {
+ spin_lock_irq(&phba->hbalock);
+ phba->sli.sli_flag |= LPFC_SLI_ACTIVE;
+ spin_unlock_irq(&phba->hbalock);
+ }
+
+ /*
+ * Allocate a single mailbox container for initializing the
+ * port.
+ */
+ mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq)
+ return -ENOMEM;
+
+ /*
+ * Continue initialization with default values even if driver failed
+ * to read FCoE param config regions
+ */
+ if (lpfc_sli4_read_fcoe_params(phba, mboxq))
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_INIT,
+ "2570 Failed to read FCoE parameters \n");
+
+ /* Issue READ_REV to collect vpd and FW information. */
+ vpd_size = PAGE_SIZE;
+ vpd = kzalloc(vpd_size, GFP_KERNEL);
+ if (!vpd) {
+ rc = -ENOMEM;
+ goto out_free_mbox;
+ }
+
+ rc = lpfc_sli4_read_rev(phba, mboxq, vpd, &vpd_size);
+ if (unlikely(rc))
+ goto out_free_vpd;
+
+ mqe = &mboxq->u.mqe;
+ if ((bf_get(lpfc_mbx_rd_rev_sli_lvl,
+ &mqe->un.read_rev) != LPFC_SLI_REV4) ||
+ (bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev) == 0)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0376 READ_REV Error. SLI Level %d "
+ "FCoE enabled %d\n",
+ bf_get(lpfc_mbx_rd_rev_sli_lvl, &mqe->un.read_rev),
+ bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev));
+ rc = -EIO;
+ goto out_free_vpd;
+ }
+ /* Single threaded at this point, no need for lock */
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag |= HBA_FCOE_SUPPORT;
+ spin_unlock_irq(&phba->hbalock);
+ /*
+ * Evaluate the read rev and vpd data. Populate the driver
+ * state with the results. If this routine fails, the failure
+ * is not fatal as the driver will use generic values.
+ */
+ rc = lpfc_parse_vpd(phba, vpd, vpd_size);
+ if (unlikely(!rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0377 Error %d parsing vpd. "
+ "Using defaults.\n", rc);
+ rc = 0;
+ }
+
+ /* By now, we should determine the SLI revision, hard code for now */
+ phba->sli_rev = LPFC_SLI_REV4;
+
+ /*
+ * Discover the port's supported feature set and match it against the
+ * hosts requests.
+ */
+ lpfc_request_features(phba, mboxq);
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ if (unlikely(rc)) {
+ rc = -EIO;
+ goto out_free_vpd;
+ }
+
+ /*
+ * The port must support FCP initiator mode as this is the
+ * only mode running in the host.
+ */
+ if (!(bf_get(lpfc_mbx_rq_ftr_rsp_fcpi, &mqe->un.req_ftrs))) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+ "0378 No support for fcpi mode.\n");
+ ftr_rsp++;
+ }
+
+ /*
+ * If the port cannot support the host's requested features
+ * then turn off the global config parameters to disable the
+ * feature in the driver. This is not a fatal error.
+ */
+ if ((phba->cfg_enable_bg) &&
+ !(bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs)))
+ ftr_rsp++;
+
+ if (phba->max_vpi && phba->cfg_enable_npiv &&
+ !(bf_get(lpfc_mbx_rq_ftr_rsp_npiv, &mqe->un.req_ftrs)))
+ ftr_rsp++;
+
+ if (ftr_rsp) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+ "0379 Feature Mismatch Data: x%08x %08x "
+ "x%x x%x x%x\n", mqe->un.req_ftrs.word2,
+ mqe->un.req_ftrs.word3, phba->cfg_enable_bg,
+ phba->cfg_enable_npiv, phba->max_vpi);
+ if (!(bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs)))
+ phba->cfg_enable_bg = 0;
+ if (!(bf_get(lpfc_mbx_rq_ftr_rsp_npiv, &mqe->un.req_ftrs)))
+ phba->cfg_enable_npiv = 0;
+ }
+
+ /* These SLI3 features are assumed in SLI4 */
+ spin_lock_irq(&phba->hbalock);
+ phba->sli3_options |= (LPFC_SLI3_NPIV_ENABLED | LPFC_SLI3_HBQ_ENABLED);
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Read the port's service parameters. */
+ lpfc_read_sparam(phba, mboxq, vport->vpi);
+ mboxq->vport = vport;
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ mp = (struct lpfc_dmabuf *) mboxq->context1;
+ if (rc == MBX_SUCCESS) {
+ memcpy(&vport->fc_sparam, mp->virt, sizeof(struct serv_parm));
+ rc = 0;
+ }
+
+ /*
+ * This memory was allocated by the lpfc_read_sparam routine. Release
+ * it to the mbuf pool.
+ */
+ lpfc_mbuf_free(phba, mp->virt, mp->phys);
+ kfree(mp);
+ mboxq->context1 = NULL;
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0382 READ_SPARAM command failed "
+ "status %d, mbxStatus x%x\n",
+ rc, bf_get(lpfc_mqe_status, mqe));
+ phba->link_state = LPFC_HBA_ERROR;
+ rc = -EIO;
+ goto out_free_vpd;
+ }
+
+ if (phba->cfg_soft_wwnn)
+ u64_to_wwn(phba->cfg_soft_wwnn,
+ vport->fc_sparam.nodeName.u.wwn);
+ if (phba->cfg_soft_wwpn)
+ u64_to_wwn(phba->cfg_soft_wwpn,
+ vport->fc_sparam.portName.u.wwn);
+ memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
+ sizeof(struct lpfc_name));
+ memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
+ sizeof(struct lpfc_name));
+
+ /* Update the fc_host data structures with new wwn. */
+ fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
+ fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
+
+ /* Register SGL pool to the device using non-embedded mailbox command */
+ rc = lpfc_sli4_post_sgl_list(phba);
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0582 Error %d during sgl post operation", rc);
+ rc = -ENODEV;
+ goto out_free_vpd;
+ }
+
+ /* Register SCSI SGL pool to the device */
+ rc = lpfc_sli4_repost_scsi_sgl_list(phba);
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+ "0383 Error %d during scsi sgl post opeation",
+ rc);
+ /* Some Scsi buffers were moved to the abort scsi list */
+ /* A pci function reset will repost them */
+ rc = -ENODEV;
+ goto out_free_vpd;
+ }
+
+ /* Post the rpi header region to the device. */
+ rc = lpfc_sli4_post_all_rpi_hdrs(phba);
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0393 Error %d during rpi post operation\n",
+ rc);
+ rc = -ENODEV;
+ goto out_free_vpd;
+ }
+ /* Temporary initialization of lpfc_fip_flag to non-fip */
+ bf_set(lpfc_fip_flag, &phba->sli4_hba.sli4_flags, 0);
+
+ /* Set up all the queues to the device */
+ rc = lpfc_sli4_queue_setup(phba);
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0381 Error %d during queue setup.\n ", rc);
+ goto out_stop_timers;
+ }
+
+ /* Arm the CQs and then EQs on device */
+ lpfc_sli4_arm_cqeq_intr(phba);
+
+ /* Indicate device interrupt mode */
+ phba->sli4_hba.intr_enable = 1;
+
+ /* Allow asynchronous mailbox command to go through */
+ spin_lock_irq(&phba->hbalock);
+ phba->sli.sli_flag &= ~LPFC_SLI_ASYNC_MBX_BLK;
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Post receive buffers to the device */
+ lpfc_sli4_rb_setup(phba);
+
+ /* Start the ELS watchdog timer */
+ /*
+ * The driver for SLI4 is not yet ready to process timeouts
+ * or interrupts. Once it is, the comment bars can be removed.
+ */
+ /* mod_timer(&vport->els_tmofunc,
+ * jiffies + HZ * (phba->fc_ratov*2)); */
+
+ /* Start heart beat timer */
+ mod_timer(&phba->hb_tmofunc,
+ jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
+ phba->hb_outstanding = 0;
+ phba->last_completion_time = jiffies;
+
+ /* Start error attention (ERATT) polling timer */
+ mod_timer(&phba->eratt_poll, jiffies + HZ * LPFC_ERATT_POLL_INTERVAL);
+
+ /*
+ * The port is ready, set the host's link state to LINK_DOWN
+ * in preparation for link interrupts.
+ */
+ lpfc_init_link(phba, mboxq, phba->cfg_topology, phba->cfg_link_speed);
+ mboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ lpfc_set_loopback_flag(phba);
+ /* Change driver state to LPFC_LINK_DOWN right before init link */
+ spin_lock_irq(&phba->hbalock);
+ phba->link_state = LPFC_LINK_DOWN;
+ spin_unlock_irq(&phba->hbalock);
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+ if (unlikely(rc != MBX_NOT_FINISHED)) {
+ kfree(vpd);
+ return 0;
+ } else
+ rc = -EIO;
+
+ /* Unset all the queues set up in this routine when error out */
+ if (rc)
+ lpfc_sli4_queue_unset(phba);
+
+out_stop_timers:
+ if (rc)
+ lpfc_stop_hba_timers(phba);
+out_free_vpd:
+ kfree(vpd);
+out_free_mbox:
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return rc;
+}
/**
* lpfc_mbox_timeout - Timeout call back function for mbox timer
@@ -3244,7 +4608,7 @@ void
lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
{
LPFC_MBOXQ_t *pmbox = phba->sli.mbox_active;
- MAILBOX_t *mb = &pmbox->mb;
+ MAILBOX_t *mb = &pmbox->u.mb;
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
@@ -3281,7 +4645,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
spin_unlock_irq(&phba->pport->work_port_lock);
spin_lock_irq(&phba->hbalock);
phba->link_state = LPFC_LINK_UNKNOWN;
- psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+ psli->sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
pring = &psli->ring[psli->fcp_ring];
@@ -3289,32 +4653,20 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"0345 Resetting board due to mailbox timeout\n");
- /*
- * lpfc_offline calls lpfc_sli_hba_down which will clean up
- * on oustanding mailbox commands.
- */
- /* If resets are disabled then set error state and return. */
- if (!phba->cfg_enable_hba_reset) {
- phba->link_state = LPFC_HBA_ERROR;
- return;
- }
- lpfc_offline_prep(phba);
- lpfc_offline(phba);
- lpfc_sli_brdrestart(phba);
- lpfc_online(phba);
- lpfc_unblock_mgmt_io(phba);
- return;
+
+ /* Reset the HBA device */
+ lpfc_reset_hba(phba);
}
/**
- * lpfc_sli_issue_mbox - Issue a mailbox command to firmware
+ * lpfc_sli_issue_mbox_s3 - Issue an SLI3 mailbox command to firmware
* @phba: Pointer to HBA context object.
* @pmbox: Pointer to mailbox object.
* @flag: Flag indicating how the mailbox need to be processed.
*
* This function is called by discovery code and HBA management code
- * to submit a mailbox command to firmware. This function gets the
- * hbalock to protect the data structures.
+ * to submit a mailbox command to firmware with SLI-3 interface spec. This
+ * function gets the hbalock to protect the data structures.
* The mailbox command can be submitted in polling mode, in which case
* this function will wait in a polling loop for the completion of the
* mailbox.
@@ -3332,8 +4684,9 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
* return codes the caller owns the mailbox command after the return of
* the function.
**/
-int
-lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
+static int
+lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
+ uint32_t flag)
{
MAILBOX_t *mb;
struct lpfc_sli *psli = &phba->sli;
@@ -3349,6 +4702,10 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
spin_lock_irqsave(&phba->hbalock, drvr_flag);
if (!pmbox) {
/* processing mbox queue from intr_handler */
+ if (unlikely(psli->sli_flag & LPFC_SLI_ASYNC_MBX_BLK)) {
+ spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+ return MBX_SUCCESS;
+ }
processing_queue = 1;
phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
pmbox = lpfc_mbox_get(phba);
@@ -3365,7 +4722,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
lpfc_printf_log(phba, KERN_ERR,
LOG_MBOX | LOG_VPORT,
"1806 Mbox x%x failed. No vport\n",
- pmbox->mb.mbxCommand);
+ pmbox->u.mb.mbxCommand);
dump_stack();
goto out_not_finished;
}
@@ -3385,21 +4742,29 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
psli = &phba->sli;
- mb = &pmbox->mb;
+ mb = &pmbox->u.mb;
status = MBX_SUCCESS;
if (phba->link_state == LPFC_HBA_ERROR) {
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
/* Mbox command <mbxCommand> cannot issue */
- LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):0311 Mailbox command x%x cannot "
+ "issue Data: x%x x%x\n",
+ pmbox->vport ? pmbox->vport->vpi : 0,
+ pmbox->u.mb.mbxCommand, psli->sli_flag, flag);
goto out_not_finished;
}
if (mb->mbxCommand != MBX_KILL_BOARD && flag & MBX_NOWAIT &&
!(readl(phba->HCregaddr) & HC_MBINT_ENA)) {
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
- LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2528 Mailbox command x%x cannot "
+ "issue Data: x%x x%x\n",
+ pmbox->vport ? pmbox->vport->vpi : 0,
+ pmbox->u.mb.mbxCommand, psli->sli_flag, flag);
goto out_not_finished;
}
@@ -3413,14 +4778,24 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
/* Mbox command <mbxCommand> cannot issue */
- LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2529 Mailbox command x%x "
+ "cannot issue Data: x%x x%x\n",
+ pmbox->vport ? pmbox->vport->vpi : 0,
+ pmbox->u.mb.mbxCommand,
+ psli->sli_flag, flag);
goto out_not_finished;
}
- if (!(psli->sli_flag & LPFC_SLI2_ACTIVE)) {
+ if (!(psli->sli_flag & LPFC_SLI_ACTIVE)) {
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
/* Mbox command <mbxCommand> cannot issue */
- LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2530 Mailbox command x%x "
+ "cannot issue Data: x%x x%x\n",
+ pmbox->vport ? pmbox->vport->vpi : 0,
+ pmbox->u.mb.mbxCommand,
+ psli->sli_flag, flag);
goto out_not_finished;
}
@@ -3462,12 +4837,17 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
/* If we are not polling, we MUST be in SLI2 mode */
if (flag != MBX_POLL) {
- if (!(psli->sli_flag & LPFC_SLI2_ACTIVE) &&
+ if (!(psli->sli_flag & LPFC_SLI_ACTIVE) &&
(mb->mbxCommand != MBX_KILL_BOARD)) {
psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
/* Mbox command <mbxCommand> cannot issue */
- LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2531 Mailbox command x%x "
+ "cannot issue Data: x%x x%x\n",
+ pmbox->vport ? pmbox->vport->vpi : 0,
+ pmbox->u.mb.mbxCommand,
+ psli->sli_flag, flag);
goto out_not_finished;
}
/* timeout active mbox command */
@@ -3506,7 +4886,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
/* next set own bit for the adapter and copy over command word */
mb->mbxOwner = OWN_CHIP;
- if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+ if (psli->sli_flag & LPFC_SLI_ACTIVE) {
/* First copy command data to host SLIM area */
lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE);
} else {
@@ -3529,7 +4909,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
if (mb->mbxCommand == MBX_CONFIG_PORT) {
/* switch over to host mailbox */
- psli->sli_flag |= LPFC_SLI2_ACTIVE;
+ psli->sli_flag |= LPFC_SLI_ACTIVE;
}
}
@@ -3552,7 +4932,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
writel(CA_MBATT, phba->CAregaddr);
readl(phba->CAregaddr); /* flush */
- if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+ if (psli->sli_flag & LPFC_SLI_ACTIVE) {
/* First read mbox status word */
word0 = *((uint32_t *)phba->mbox);
word0 = le32_to_cpu(word0);
@@ -3591,7 +4971,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
spin_lock_irqsave(&phba->hbalock, drvr_flag);
}
- if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+ if (psli->sli_flag & LPFC_SLI_ACTIVE) {
/* First copy command data */
word0 = *((uint32_t *)phba->mbox);
word0 = le32_to_cpu(word0);
@@ -3604,7 +4984,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
if (((slimword0 & OWN_CHIP) != OWN_CHIP)
&& slimmb->mbxStatus) {
psli->sli_flag &=
- ~LPFC_SLI2_ACTIVE;
+ ~LPFC_SLI_ACTIVE;
word0 = slimword0;
}
}
@@ -3616,7 +4996,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
ha_copy = readl(phba->HAregaddr);
}
- if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+ if (psli->sli_flag & LPFC_SLI_ACTIVE) {
/* copy results back to user */
lpfc_sli_pcimem_bcopy(phba->mbox, mb, MAILBOX_CMD_SIZE);
} else {
@@ -3643,13 +5023,420 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
out_not_finished:
if (processing_queue) {
- pmbox->mb.mbxStatus = MBX_NOT_FINISHED;
+ pmbox->u.mb.mbxStatus = MBX_NOT_FINISHED;
lpfc_mbox_cmpl_put(phba, pmbox);
}
return MBX_NOT_FINISHED;
}
/**
+ * lpfc_sli4_post_sync_mbox - Post an SLI4 mailbox to the bootstrap mailbox
+ * @phba: Pointer to HBA context object.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * The function posts a mailbox to the port. The mailbox is expected
+ * to be comletely filled in and ready for the port to operate on it.
+ * This routine executes a synchronous completion operation on the
+ * mailbox by polling for its completion.
+ *
+ * The caller must not be holding any locks when calling this routine.
+ *
+ * Returns:
+ * MBX_SUCCESS - mailbox posted successfully
+ * Any of the MBX error values.
+ **/
+static int
+lpfc_sli4_post_sync_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+ int rc = MBX_SUCCESS;
+ unsigned long iflag;
+ uint32_t db_ready;
+ uint32_t mcqe_status;
+ uint32_t mbx_cmnd;
+ unsigned long timeout;
+ struct lpfc_sli *psli = &phba->sli;
+ struct lpfc_mqe *mb = &mboxq->u.mqe;
+ struct lpfc_bmbx_create *mbox_rgn;
+ struct dma_address *dma_address;
+ struct lpfc_register bmbx_reg;
+
+ /*
+ * Only one mailbox can be active to the bootstrap mailbox region
+ * at a time and there is no queueing provided.
+ */
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2532 Mailbox command x%x (x%x) "
+ "cannot issue Data: x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ mboxq->u.mb.mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ psli->sli_flag, MBX_POLL);
+ return MBXERR_ERROR;
+ }
+ /* The server grabs the token and owns it until release */
+ psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE;
+ phba->sli.mbox_active = mboxq;
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+
+ /*
+ * Initialize the bootstrap memory region to avoid stale data areas
+ * in the mailbox post. Then copy the caller's mailbox contents to
+ * the bmbx mailbox region.
+ */
+ mbx_cmnd = bf_get(lpfc_mqe_command, mb);
+ memset(phba->sli4_hba.bmbx.avirt, 0, sizeof(struct lpfc_bmbx_create));
+ lpfc_sli_pcimem_bcopy(mb, phba->sli4_hba.bmbx.avirt,
+ sizeof(struct lpfc_mqe));
+
+ /* Post the high mailbox dma address to the port and wait for ready. */
+ dma_address = &phba->sli4_hba.bmbx.dma_address;
+ writel(dma_address->addr_hi, phba->sli4_hba.BMBXregaddr);
+
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mbx_cmnd)
+ * 1000) + jiffies;
+ do {
+ bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
+ db_ready = bf_get(lpfc_bmbx_rdy, &bmbx_reg);
+ if (!db_ready)
+ msleep(2);
+
+ if (time_after(jiffies, timeout)) {
+ rc = MBXERR_ERROR;
+ goto exit;
+ }
+ } while (!db_ready);
+
+ /* Post the low mailbox dma address to the port. */
+ writel(dma_address->addr_lo, phba->sli4_hba.BMBXregaddr);
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mbx_cmnd)
+ * 1000) + jiffies;
+ do {
+ bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
+ db_ready = bf_get(lpfc_bmbx_rdy, &bmbx_reg);
+ if (!db_ready)
+ msleep(2);
+
+ if (time_after(jiffies, timeout)) {
+ rc = MBXERR_ERROR;
+ goto exit;
+ }
+ } while (!db_ready);
+
+ /*
+ * Read the CQ to ensure the mailbox has completed.
+ * If so, update the mailbox status so that the upper layers
+ * can complete the request normally.
+ */
+ lpfc_sli_pcimem_bcopy(phba->sli4_hba.bmbx.avirt, mb,
+ sizeof(struct lpfc_mqe));
+ mbox_rgn = (struct lpfc_bmbx_create *) phba->sli4_hba.bmbx.avirt;
+ lpfc_sli_pcimem_bcopy(&mbox_rgn->mcqe, &mboxq->mcqe,
+ sizeof(struct lpfc_mcqe));
+ mcqe_status = bf_get(lpfc_mcqe_status, &mbox_rgn->mcqe);
+
+ /* Prefix the mailbox status with range x4000 to note SLI4 status. */
+ if (mcqe_status != MB_CQE_STATUS_SUCCESS) {
+ bf_set(lpfc_mqe_status, mb, LPFC_MBX_ERROR_RANGE | mcqe_status);
+ rc = MBXERR_ERROR;
+ }
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+ "(%d):0356 Mailbox cmd x%x (x%x) Status x%x "
+ "Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x x%x x%x"
+ " x%x x%x CQ: x%x x%x x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ mbx_cmnd, lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ bf_get(lpfc_mqe_status, mb),
+ mb->un.mb_words[0], mb->un.mb_words[1],
+ mb->un.mb_words[2], mb->un.mb_words[3],
+ mb->un.mb_words[4], mb->un.mb_words[5],
+ mb->un.mb_words[6], mb->un.mb_words[7],
+ mb->un.mb_words[8], mb->un.mb_words[9],
+ mb->un.mb_words[10], mb->un.mb_words[11],
+ mb->un.mb_words[12], mboxq->mcqe.word0,
+ mboxq->mcqe.mcqe_tag0, mboxq->mcqe.mcqe_tag1,
+ mboxq->mcqe.trailer);
+exit:
+ /* We are holding the token, no needed for lock when release */
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ phba->sli.mbox_active = NULL;
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ return rc;
+}
+
+/**
+ * lpfc_sli_issue_mbox_s4 - Issue an SLI4 mailbox command to firmware
+ * @phba: Pointer to HBA context object.
+ * @pmbox: Pointer to mailbox object.
+ * @flag: Flag indicating how the mailbox need to be processed.
+ *
+ * This function is called by discovery code and HBA management code to submit
+ * a mailbox command to firmware with SLI-4 interface spec.
+ *
+ * Return codes the caller owns the mailbox command after the return of the
+ * function.
+ **/
+static int
+lpfc_sli_issue_mbox_s4(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
+ uint32_t flag)
+{
+ struct lpfc_sli *psli = &phba->sli;
+ unsigned long iflags;
+ int rc;
+
+ /* Detect polling mode and jump to a handler */
+ if (!phba->sli4_hba.intr_enable) {
+ if (flag == MBX_POLL)
+ rc = lpfc_sli4_post_sync_mbox(phba, mboxq);
+ else
+ rc = -EIO;
+ if (rc != MBX_SUCCESS)
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2541 Mailbox command x%x "
+ "(x%x) cannot issue Data: x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ mboxq->u.mb.mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ psli->sli_flag, flag);
+ return rc;
+ } else if (flag == MBX_POLL) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2542 Mailbox command x%x (x%x) "
+ "cannot issue Data: x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ mboxq->u.mb.mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ psli->sli_flag, flag);
+ return -EIO;
+ }
+
+ /* Now, interrupt mode asynchrous mailbox command */
+ rc = lpfc_mbox_cmd_check(phba, mboxq);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2543 Mailbox command x%x (x%x) "
+ "cannot issue Data: x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ mboxq->u.mb.mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ psli->sli_flag, flag);
+ goto out_not_finished;
+ }
+ rc = lpfc_mbox_dev_check(phba);
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2544 Mailbox command x%x (x%x) "
+ "cannot issue Data: x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ mboxq->u.mb.mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ psli->sli_flag, flag);
+ goto out_not_finished;
+ }
+
+ /* Put the mailbox command to the driver internal FIFO */
+ psli->slistat.mbox_busy++;
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ lpfc_mbox_put(phba, mboxq);
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+ "(%d):0354 Mbox cmd issue - Enqueue Data: "
+ "x%x (x%x) x%x x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0xffffff,
+ bf_get(lpfc_mqe_command, &mboxq->u.mqe),
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ phba->pport->port_state,
+ psli->sli_flag, MBX_NOWAIT);
+ /* Wake up worker thread to transport mailbox command from head */
+ lpfc_worker_wake_up(phba);
+
+ return MBX_BUSY;
+
+out_not_finished:
+ return MBX_NOT_FINISHED;
+}
+
+/**
+ * lpfc_sli4_post_async_mbox - Post an SLI4 mailbox command to device
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called by worker thread to send a mailbox command to
+ * SLI4 HBA firmware.
+ *
+ **/
+int
+lpfc_sli4_post_async_mbox(struct lpfc_hba *phba)
+{
+ struct lpfc_sli *psli = &phba->sli;
+ LPFC_MBOXQ_t *mboxq;
+ int rc = MBX_SUCCESS;
+ unsigned long iflags;
+ struct lpfc_mqe *mqe;
+ uint32_t mbx_cmnd;
+
+ /* Check interrupt mode before post async mailbox command */
+ if (unlikely(!phba->sli4_hba.intr_enable))
+ return MBX_NOT_FINISHED;
+
+ /* Check for mailbox command service token */
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ if (unlikely(psli->sli_flag & LPFC_SLI_ASYNC_MBX_BLK)) {
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ return MBX_NOT_FINISHED;
+ }
+ if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ return MBX_NOT_FINISHED;
+ }
+ if (unlikely(phba->sli.mbox_active)) {
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0384 There is pending active mailbox cmd\n");
+ return MBX_NOT_FINISHED;
+ }
+ /* Take the mailbox command service token */
+ psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE;
+
+ /* Get the next mailbox command from head of queue */
+ mboxq = lpfc_mbox_get(phba);
+
+ /* If no more mailbox command waiting for post, we're done */
+ if (!mboxq) {
+ psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ return MBX_SUCCESS;
+ }
+ phba->sli.mbox_active = mboxq;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+ /* Check device readiness for posting mailbox command */
+ rc = lpfc_mbox_dev_check(phba);
+ if (unlikely(rc))
+ /* Driver clean routine will clean up pending mailbox */
+ goto out_not_finished;
+
+ /* Prepare the mbox command to be posted */
+ mqe = &mboxq->u.mqe;
+ mbx_cmnd = bf_get(lpfc_mqe_command, mqe);
+
+ /* Start timer for the mbox_tmo and log some mailbox post messages */
+ mod_timer(&psli->mbox_tmo, (jiffies +
+ (HZ * lpfc_mbox_tmo_val(phba, mbx_cmnd))));
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+ "(%d):0355 Mailbox cmd x%x (x%x) issue Data: "
+ "x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0, mbx_cmnd,
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ phba->pport->port_state, psli->sli_flag);
+
+ if (mbx_cmnd != MBX_HEARTBEAT) {
+ if (mboxq->vport) {
+ lpfc_debugfs_disc_trc(mboxq->vport,
+ LPFC_DISC_TRC_MBOX_VPORT,
+ "MBOX Send vport: cmd:x%x mb:x%x x%x",
+ mbx_cmnd, mqe->un.mb_words[0],
+ mqe->un.mb_words[1]);
+ } else {
+ lpfc_debugfs_disc_trc(phba->pport,
+ LPFC_DISC_TRC_MBOX,
+ "MBOX Send: cmd:x%x mb:x%x x%x",
+ mbx_cmnd, mqe->un.mb_words[0],
+ mqe->un.mb_words[1]);
+ }
+ }
+ psli->slistat.mbox_cmd++;
+
+ /* Post the mailbox command to the port */
+ rc = lpfc_sli4_mq_put(phba->sli4_hba.mbx_wq, mqe);
+ if (rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2533 Mailbox command x%x (x%x) "
+ "cannot issue Data: x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ mboxq->u.mb.mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ psli->sli_flag, MBX_NOWAIT);
+ goto out_not_finished;
+ }
+
+ return rc;
+
+out_not_finished:
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
+ __lpfc_mbox_cmpl_put(phba, mboxq);
+ /* Release the token */
+ psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ phba->sli.mbox_active = NULL;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+ return MBX_NOT_FINISHED;
+}
+
+/**
+ * lpfc_sli_issue_mbox - Wrapper func for issuing mailbox command
+ * @phba: Pointer to HBA context object.
+ * @pmbox: Pointer to mailbox object.
+ * @flag: Flag indicating how the mailbox need to be processed.
+ *
+ * This routine wraps the actual SLI3 or SLI4 mailbox issuing routine from
+ * the API jump table function pointer from the lpfc_hba struct.
+ *
+ * Return codes the caller owns the mailbox command after the return of the
+ * function.
+ **/
+int
+lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
+{
+ return phba->lpfc_sli_issue_mbox(phba, pmbox, flag);
+}
+
+/**
+ * lpfc_mbox_api_table_setup - Set up mbox api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the mbox interface API function jump table in @phba
+ * struct.
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_mbox_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+
+ switch (dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ phba->lpfc_sli_issue_mbox = lpfc_sli_issue_mbox_s3;
+ phba->lpfc_sli_handle_slow_ring_event =
+ lpfc_sli_handle_slow_ring_event_s3;
+ phba->lpfc_sli_hbq_to_firmware = lpfc_sli_hbq_to_firmware_s3;
+ phba->lpfc_sli_brdrestart = lpfc_sli_brdrestart_s3;
+ phba->lpfc_sli_brdready = lpfc_sli_brdready_s3;
+ break;
+ case LPFC_PCI_DEV_OC:
+ phba->lpfc_sli_issue_mbox = lpfc_sli_issue_mbox_s4;
+ phba->lpfc_sli_handle_slow_ring_event =
+ lpfc_sli_handle_slow_ring_event_s4;
+ phba->lpfc_sli_hbq_to_firmware = lpfc_sli_hbq_to_firmware_s4;
+ phba->lpfc_sli_brdrestart = lpfc_sli_brdrestart_s4;
+ phba->lpfc_sli_brdready = lpfc_sli_brdready_s4;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1420 Invalid HBA PCI-device group: 0x%x\n",
+ dev_grp);
+ return -ENODEV;
+ break;
+ }
+ return 0;
+}
+
+/**
* __lpfc_sli_ringtx_put - Add an iocb to the txq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
@@ -3701,35 +5488,34 @@ lpfc_sli_next_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
}
/**
- * __lpfc_sli_issue_iocb - Lockless version of lpfc_sli_issue_iocb
+ * __lpfc_sli_issue_iocb_s3 - SLI3 device lockless ver of lpfc_sli_issue_iocb
* @phba: Pointer to HBA context object.
- * @pring: Pointer to driver SLI ring object.
+ * @ring_number: SLI ring number to issue iocb on.
* @piocb: Pointer to command iocb.
* @flag: Flag indicating if this command can be put into txq.
*
- * __lpfc_sli_issue_iocb is used by other functions in the driver
- * to issue an iocb command to the HBA. If the PCI slot is recovering
- * from error state or if HBA is resetting or if LPFC_STOP_IOCB_EVENT
- * flag is turned on, the function returns IOCB_ERROR.
- * When the link is down, this function allows only iocbs for
- * posting buffers.
- * This function finds next available slot in the command ring and
- * posts the command to the available slot and writes the port
- * attention register to request HBA start processing new iocb.
- * If there is no slot available in the ring and
- * flag & SLI_IOCB_RET_IOCB is set, the new iocb is added to the
- * txq, otherwise the function returns IOCB_BUSY.
- *
- * This function is called with hbalock held.
- * The function will return success after it successfully submit the
- * iocb to firmware or after adding to the txq.
+ * __lpfc_sli_issue_iocb_s3 is used by other functions in the driver to issue
+ * an iocb command to an HBA with SLI-3 interface spec. If the PCI slot is
+ * recovering from error state, if HBA is resetting or if LPFC_STOP_IOCB_EVENT
+ * flag is turned on, the function returns IOCB_ERROR. When the link is down,
+ * this function allows only iocbs for posting buffers. This function finds
+ * next available slot in the command ring and posts the command to the
+ * available slot and writes the port attention register to request HBA start
+ * processing new iocb. If there is no slot available in the ring and
+ * flag & SLI_IOCB_RET_IOCB is set, the new iocb is added to the txq, otherwise
+ * the function returns IOCB_BUSY.
+ *
+ * This function is called with hbalock held. The function will return success
+ * after it successfully submit the iocb to firmware or after adding to the
+ * txq.
**/
static int
-__lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+__lpfc_sli_issue_iocb_s3(struct lpfc_hba *phba, uint32_t ring_number,
struct lpfc_iocbq *piocb, uint32_t flag)
{
struct lpfc_iocbq *nextiocb;
IOCB_t *iocb;
+ struct lpfc_sli_ring *pring = &phba->sli.ring[ring_number];
if (piocb->iocb_cmpl && (!piocb->vport) &&
(piocb->iocb.ulpCommand != CMD_ABORT_XRI_CN) &&
@@ -3833,6 +5619,498 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
return IOCB_BUSY;
}
+/**
+ * lpfc_sli4_bpl2sgl - Convert the bpl/bde to a sgl.
+ * @phba: Pointer to HBA context object.
+ * @piocb: Pointer to command iocb.
+ * @sglq: Pointer to the scatter gather queue object.
+ *
+ * This routine converts the bpl or bde that is in the IOCB
+ * to a sgl list for the sli4 hardware. The physical address
+ * of the bpl/bde is converted back to a virtual address.
+ * If the IOCB contains a BPL then the list of BDE's is
+ * converted to sli4_sge's. If the IOCB contains a single
+ * BDE then it is converted to a single sli_sge.
+ * The IOCB is still in cpu endianess so the contents of
+ * the bpl can be used without byte swapping.
+ *
+ * Returns valid XRI = Success, NO_XRI = Failure.
+**/
+static uint16_t
+lpfc_sli4_bpl2sgl(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq,
+ struct lpfc_sglq *sglq)
+{
+ uint16_t xritag = NO_XRI;
+ struct ulp_bde64 *bpl = NULL;
+ struct ulp_bde64 bde;
+ struct sli4_sge *sgl = NULL;
+ IOCB_t *icmd;
+ int numBdes = 0;
+ int i = 0;
+
+ if (!piocbq || !sglq)
+ return xritag;
+
+ sgl = (struct sli4_sge *)sglq->sgl;
+ icmd = &piocbq->iocb;
+ if (icmd->un.genreq64.bdl.bdeFlags == BUFF_TYPE_BLP_64) {
+ numBdes = icmd->un.genreq64.bdl.bdeSize /
+ sizeof(struct ulp_bde64);
+ /* The addrHigh and addrLow fields within the IOCB
+ * have not been byteswapped yet so there is no
+ * need to swap them back.
+ */
+ bpl = (struct ulp_bde64 *)
+ ((struct lpfc_dmabuf *)piocbq->context3)->virt;
+
+ if (!bpl)
+ return xritag;
+
+ for (i = 0; i < numBdes; i++) {
+ /* Should already be byte swapped. */
+ sgl->addr_hi = bpl->addrHigh;
+ sgl->addr_lo = bpl->addrLow;
+ /* swap the size field back to the cpu so we
+ * can assign it to the sgl.
+ */
+ bde.tus.w = le32_to_cpu(bpl->tus.w);
+ bf_set(lpfc_sli4_sge_len, sgl, bde.tus.f.bdeSize);
+ if ((i+1) == numBdes)
+ bf_set(lpfc_sli4_sge_last, sgl, 1);
+ else
+ bf_set(lpfc_sli4_sge_last, sgl, 0);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl->word3 = cpu_to_le32(sgl->word3);
+ bpl++;
+ sgl++;
+ }
+ } else if (icmd->un.genreq64.bdl.bdeFlags == BUFF_TYPE_BDE_64) {
+ /* The addrHigh and addrLow fields of the BDE have not
+ * been byteswapped yet so they need to be swapped
+ * before putting them in the sgl.
+ */
+ sgl->addr_hi =
+ cpu_to_le32(icmd->un.genreq64.bdl.addrHigh);
+ sgl->addr_lo =
+ cpu_to_le32(icmd->un.genreq64.bdl.addrLow);
+ bf_set(lpfc_sli4_sge_len, sgl,
+ icmd->un.genreq64.bdl.bdeSize);
+ bf_set(lpfc_sli4_sge_last, sgl, 1);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl->word3 = cpu_to_le32(sgl->word3);
+ }
+ return sglq->sli4_xritag;
+}
+
+/**
+ * lpfc_sli4_scmd_to_wqidx_distr - scsi command to SLI4 WQ index distribution
+ * @phba: Pointer to HBA context object.
+ * @piocb: Pointer to command iocb.
+ *
+ * This routine performs a round robin SCSI command to SLI4 FCP WQ index
+ * distribution.
+ *
+ * Return: index into SLI4 fast-path FCP queue index.
+ **/
+static uint32_t
+lpfc_sli4_scmd_to_wqidx_distr(struct lpfc_hba *phba, struct lpfc_iocbq *piocb)
+{
+ static uint32_t fcp_qidx;
+
+ return fcp_qidx++ % phba->cfg_fcp_wq_count;
+}
+
+/**
+ * lpfc_sli_iocb2wqe - Convert the IOCB to a work queue entry.
+ * @phba: Pointer to HBA context object.
+ * @piocb: Pointer to command iocb.
+ * @wqe: Pointer to the work queue entry.
+ *
+ * This routine converts the iocb command to its Work Queue Entry
+ * equivalent. The wqe pointer should not have any fields set when
+ * this routine is called because it will memcpy over them.
+ * This routine does not set the CQ_ID or the WQEC bits in the
+ * wqe.
+ *
+ * Returns: 0 = Success, IOCB_ERROR = Failure.
+ **/
+static int
+lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
+ union lpfc_wqe *wqe)
+{
+ uint32_t payload_len = 0;
+ uint8_t ct = 0;
+ uint32_t fip;
+ uint32_t abort_tag;
+ uint8_t command_type = ELS_COMMAND_NON_FIP;
+ uint8_t cmnd;
+ uint16_t xritag;
+ struct ulp_bde64 *bpl = NULL;
+
+ fip = bf_get(lpfc_fip_flag, &phba->sli4_hba.sli4_flags);
+ /* The fcp commands will set command type */
+ if ((!(iocbq->iocb_flag & LPFC_IO_FCP)) && (!fip))
+ command_type = ELS_COMMAND_NON_FIP;
+ else if (!(iocbq->iocb_flag & LPFC_IO_FCP))
+ command_type = ELS_COMMAND_FIP;
+ else if (iocbq->iocb_flag & LPFC_IO_FCP)
+ command_type = FCP_COMMAND;
+ else {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2019 Invalid cmd 0x%x\n",
+ iocbq->iocb.ulpCommand);
+ return IOCB_ERROR;
+ }
+ /* Some of the fields are in the right position already */
+ memcpy(wqe, &iocbq->iocb, sizeof(union lpfc_wqe));
+ abort_tag = (uint32_t) iocbq->iotag;
+ xritag = iocbq->sli4_xritag;
+ wqe->words[7] = 0; /* The ct field has moved so reset */
+ /* words0-2 bpl convert bde */
+ if (iocbq->iocb.un.genreq64.bdl.bdeFlags == BUFF_TYPE_BLP_64) {
+ bpl = (struct ulp_bde64 *)
+ ((struct lpfc_dmabuf *)iocbq->context3)->virt;
+ if (!bpl)
+ return IOCB_ERROR;
+
+ /* Should already be byte swapped. */
+ wqe->generic.bde.addrHigh = le32_to_cpu(bpl->addrHigh);
+ wqe->generic.bde.addrLow = le32_to_cpu(bpl->addrLow);
+ /* swap the size field back to the cpu so we
+ * can assign it to the sgl.
+ */
+ wqe->generic.bde.tus.w = le32_to_cpu(bpl->tus.w);
+ payload_len = wqe->generic.bde.tus.f.bdeSize;
+ } else
+ payload_len = iocbq->iocb.un.fcpi64.bdl.bdeSize;
+
+ iocbq->iocb.ulpIoTag = iocbq->iotag;
+ cmnd = iocbq->iocb.ulpCommand;
+
+ switch (iocbq->iocb.ulpCommand) {
+ case CMD_ELS_REQUEST64_CR:
+ if (!iocbq->iocb.ulpLe) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2007 Only Limited Edition cmd Format"
+ " supported 0x%x\n",
+ iocbq->iocb.ulpCommand);
+ return IOCB_ERROR;
+ }
+ wqe->els_req.payload_len = payload_len;
+ /* Els_reguest64 has a TMO */
+ bf_set(wqe_tmo, &wqe->els_req.wqe_com,
+ iocbq->iocb.ulpTimeout);
+ /* Need a VF for word 4 set the vf bit*/
+ bf_set(els_req64_vf, &wqe->els_req, 0);
+ /* And a VFID for word 12 */
+ bf_set(els_req64_vfid, &wqe->els_req, 0);
+ /*
+ * Set ct field to 3, indicates that the context_tag field
+ * contains the FCFI and remote N_Port_ID is
+ * in word 5.
+ */
+
+ ct = ((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l);
+ bf_set(lpfc_wqe_gen_context, &wqe->generic,
+ iocbq->iocb.ulpContext);
+
+ if (iocbq->vport->fc_myDID != 0) {
+ bf_set(els_req64_sid, &wqe->els_req,
+ iocbq->vport->fc_myDID);
+ bf_set(els_req64_sp, &wqe->els_req, 1);
+ }
+ bf_set(lpfc_wqe_gen_ct, &wqe->generic, ct);
+ bf_set(lpfc_wqe_gen_pu, &wqe->generic, 0);
+ /* CCP CCPE PV PRI in word10 were set in the memcpy */
+ break;
+ case CMD_XMIT_SEQUENCE64_CR:
+ /* word3 iocb=io_tag32 wqe=payload_offset */
+ /* payload offset used for multilpe outstanding
+ * sequences on the same exchange
+ */
+ wqe->words[3] = 0;
+ /* word4 relative_offset memcpy */
+ /* word5 r_ctl/df_ctl memcpy */
+ bf_set(lpfc_wqe_gen_pu, &wqe->generic, 0);
+ wqe->xmit_sequence.xmit_len = payload_len;
+ break;
+ case CMD_XMIT_BCAST64_CN:
+ /* word3 iocb=iotag32 wqe=payload_len */
+ wqe->words[3] = 0; /* no definition for this in wqe */
+ /* word4 iocb=rsvd wqe=rsvd */
+ /* word5 iocb=rctl/type/df_ctl wqe=rctl/type/df_ctl memcpy */
+ /* word6 iocb=ctxt_tag/io_tag wqe=ctxt_tag/xri */
+ bf_set(lpfc_wqe_gen_ct, &wqe->generic,
+ ((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l));
+ break;
+ case CMD_FCP_IWRITE64_CR:
+ command_type = FCP_COMMAND_DATA_OUT;
+ /* The struct for wqe fcp_iwrite has 3 fields that are somewhat
+ * confusing.
+ * word3 is payload_len: byte offset to the sgl entry for the
+ * fcp_command.
+ * word4 is total xfer len, same as the IOCB->ulpParameter.
+ * word5 is initial xfer len 0 = wait for xfer-ready
+ */
+
+ /* Always wait for xfer-ready before sending data */
+ wqe->fcp_iwrite.initial_xfer_len = 0;
+ /* word 4 (xfer length) should have been set on the memcpy */
+
+ /* allow write to fall through to read */
+ case CMD_FCP_IREAD64_CR:
+ /* FCP_CMD is always the 1st sgl entry */
+ wqe->fcp_iread.payload_len =
+ payload_len + sizeof(struct fcp_rsp);
+
+ /* word 4 (xfer length) should have been set on the memcpy */
+
+ bf_set(lpfc_wqe_gen_erp, &wqe->generic,
+ iocbq->iocb.ulpFCP2Rcvy);
+ bf_set(lpfc_wqe_gen_lnk, &wqe->generic, iocbq->iocb.ulpXS);
+ /* The XC bit and the XS bit are similar. The driver never
+ * tracked whether or not the exchange was previouslly open.
+ * XC = Exchange create, 0 is create. 1 is already open.
+ * XS = link cmd: 1 do not close the exchange after command.
+ * XS = 0 close exchange when command completes.
+ * The only time we would not set the XC bit is when the XS bit
+ * is set and we are sending our 2nd or greater command on
+ * this exchange.
+ */
+
+ /* ALLOW read & write to fall through to ICMD64 */
+ case CMD_FCP_ICMND64_CR:
+ /* Always open the exchange */
+ bf_set(wqe_xc, &wqe->fcp_iread.wqe_com, 0);
+
+ wqe->words[10] &= 0xffff0000; /* zero out ebde count */
+ bf_set(lpfc_wqe_gen_pu, &wqe->generic, iocbq->iocb.ulpPU);
+ break;
+ case CMD_GEN_REQUEST64_CR:
+ /* word3 command length is described as byte offset to the
+ * rsp_data. Would always be 16, sizeof(struct sli4_sge)
+ * sgl[0] = cmnd
+ * sgl[1] = rsp.
+ *
+ */
+ wqe->gen_req.command_len = payload_len;
+ /* Word4 parameter copied in the memcpy */
+ /* Word5 [rctl, type, df_ctl, la] copied in memcpy */
+ /* word6 context tag copied in memcpy */
+ if (iocbq->iocb.ulpCt_h || iocbq->iocb.ulpCt_l) {
+ ct = ((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l);
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2015 Invalid CT %x command 0x%x\n",
+ ct, iocbq->iocb.ulpCommand);
+ return IOCB_ERROR;
+ }
+ bf_set(lpfc_wqe_gen_ct, &wqe->generic, 0);
+ bf_set(wqe_tmo, &wqe->gen_req.wqe_com,
+ iocbq->iocb.ulpTimeout);
+
+ bf_set(lpfc_wqe_gen_pu, &wqe->generic, iocbq->iocb.ulpPU);
+ command_type = OTHER_COMMAND;
+ break;
+ case CMD_XMIT_ELS_RSP64_CX:
+ /* words0-2 BDE memcpy */
+ /* word3 iocb=iotag32 wqe=rsvd */
+ wqe->words[3] = 0;
+ /* word4 iocb=did wge=rsvd. */
+ wqe->words[4] = 0;
+ /* word5 iocb=rsvd wge=did */
+ bf_set(wqe_els_did, &wqe->xmit_els_rsp.wqe_dest,
+ iocbq->iocb.un.elsreq64.remoteID);
+
+ bf_set(lpfc_wqe_gen_ct, &wqe->generic,
+ ((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l));
+
+ bf_set(lpfc_wqe_gen_pu, &wqe->generic, iocbq->iocb.ulpPU);
+ bf_set(wqe_rcvoxid, &wqe->generic, iocbq->iocb.ulpContext);
+ if (!iocbq->iocb.ulpCt_h && iocbq->iocb.ulpCt_l)
+ bf_set(lpfc_wqe_gen_context, &wqe->generic,
+ iocbq->vport->vpi + phba->vpi_base);
+ command_type = OTHER_COMMAND;
+ break;
+ case CMD_CLOSE_XRI_CN:
+ case CMD_ABORT_XRI_CN:
+ case CMD_ABORT_XRI_CX:
+ /* words 0-2 memcpy should be 0 rserved */
+ /* port will send abts */
+ if (iocbq->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
+ /*
+ * The link is down so the fw does not need to send abts
+ * on the wire.
+ */
+ bf_set(abort_cmd_ia, &wqe->abort_cmd, 1);
+ else
+ bf_set(abort_cmd_ia, &wqe->abort_cmd, 0);
+ bf_set(abort_cmd_criteria, &wqe->abort_cmd, T_XRI_TAG);
+ abort_tag = iocbq->iocb.un.acxri.abortIoTag;
+ wqe->words[5] = 0;
+ bf_set(lpfc_wqe_gen_ct, &wqe->generic,
+ ((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l));
+ abort_tag = iocbq->iocb.un.acxri.abortIoTag;
+ wqe->generic.abort_tag = abort_tag;
+ /*
+ * The abort handler will send us CMD_ABORT_XRI_CN or
+ * CMD_CLOSE_XRI_CN and the fw only accepts CMD_ABORT_XRI_CX
+ */
+ bf_set(lpfc_wqe_gen_command, &wqe->generic, CMD_ABORT_XRI_CX);
+ cmnd = CMD_ABORT_XRI_CX;
+ command_type = OTHER_COMMAND;
+ xritag = 0;
+ break;
+ case CMD_XRI_ABORTED_CX:
+ case CMD_CREATE_XRI_CR: /* Do we expect to use this? */
+ /* words0-2 are all 0's no bde */
+ /* word3 and word4 are rsvrd */
+ wqe->words[3] = 0;
+ wqe->words[4] = 0;
+ /* word5 iocb=rsvd wge=did */
+ /* There is no remote port id in the IOCB? */
+ /* Let this fall through and fail */
+ case CMD_IOCB_FCP_IBIDIR64_CR: /* bidirectional xfer */
+ case CMD_FCP_TSEND64_CX: /* Target mode send xfer-ready */
+ case CMD_FCP_TRSP64_CX: /* Target mode rcv */
+ case CMD_FCP_AUTO_TRSP_CX: /* Auto target rsp */
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2014 Invalid command 0x%x\n",
+ iocbq->iocb.ulpCommand);
+ return IOCB_ERROR;
+ break;
+
+ }
+ bf_set(lpfc_wqe_gen_xri, &wqe->generic, xritag);
+ bf_set(lpfc_wqe_gen_request_tag, &wqe->generic, iocbq->iotag);
+ wqe->generic.abort_tag = abort_tag;
+ bf_set(lpfc_wqe_gen_cmd_type, &wqe->generic, command_type);
+ bf_set(lpfc_wqe_gen_command, &wqe->generic, cmnd);
+ bf_set(lpfc_wqe_gen_class, &wqe->generic, iocbq->iocb.ulpClass);
+ bf_set(lpfc_wqe_gen_cq_id, &wqe->generic, LPFC_WQE_CQ_ID_DEFAULT);
+
+ return 0;
+}
+
+/**
+ * __lpfc_sli_issue_iocb_s4 - SLI4 device lockless ver of lpfc_sli_issue_iocb
+ * @phba: Pointer to HBA context object.
+ * @ring_number: SLI ring number to issue iocb on.
+ * @piocb: Pointer to command iocb.
+ * @flag: Flag indicating if this command can be put into txq.
+ *
+ * __lpfc_sli_issue_iocb_s4 is used by other functions in the driver to issue
+ * an iocb command to an HBA with SLI-4 interface spec.
+ *
+ * This function is called with hbalock held. The function will return success
+ * after it successfully submit the iocb to firmware or after adding to the
+ * txq.
+ **/
+static int
+__lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
+ struct lpfc_iocbq *piocb, uint32_t flag)
+{
+ struct lpfc_sglq *sglq;
+ uint16_t xritag;
+ union lpfc_wqe wqe;
+ struct lpfc_sli_ring *pring = &phba->sli.ring[ring_number];
+ uint32_t fcp_wqidx;
+
+ if (piocb->sli4_xritag == NO_XRI) {
+ if (piocb->iocb.ulpCommand == CMD_ABORT_XRI_CN ||
+ piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
+ sglq = NULL;
+ else {
+ sglq = __lpfc_sli_get_sglq(phba);
+ if (!sglq)
+ return IOCB_ERROR;
+ piocb->sli4_xritag = sglq->sli4_xritag;
+ }
+ } else if (piocb->iocb_flag & LPFC_IO_FCP) {
+ sglq = NULL; /* These IO's already have an XRI and
+ * a mapped sgl.
+ */
+ } else {
+ /* This is a continuation of a commandi,(CX) so this
+ * sglq is on the active list
+ */
+ sglq = __lpfc_get_active_sglq(phba, piocb->sli4_xritag);
+ if (!sglq)
+ return IOCB_ERROR;
+ }
+
+ if (sglq) {
+ xritag = lpfc_sli4_bpl2sgl(phba, piocb, sglq);
+ if (xritag != sglq->sli4_xritag)
+ return IOCB_ERROR;
+ }
+
+ if (lpfc_sli4_iocb2wqe(phba, piocb, &wqe))
+ return IOCB_ERROR;
+
+ if (piocb->iocb_flag & LPFC_IO_FCP) {
+ fcp_wqidx = lpfc_sli4_scmd_to_wqidx_distr(phba, piocb);
+ if (lpfc_sli4_wq_put(phba->sli4_hba.fcp_wq[fcp_wqidx], &wqe))
+ return IOCB_ERROR;
+ } else {
+ if (lpfc_sli4_wq_put(phba->sli4_hba.els_wq, &wqe))
+ return IOCB_ERROR;
+ }
+ lpfc_sli_ringtxcmpl_put(phba, pring, piocb);
+
+ return 0;
+}
+
+/**
+ * __lpfc_sli_issue_iocb - Wrapper func of lockless version for issuing iocb
+ *
+ * This routine wraps the actual lockless version for issusing IOCB function
+ * pointer from the lpfc_hba struct.
+ *
+ * Return codes:
+ * IOCB_ERROR - Error
+ * IOCB_SUCCESS - Success
+ * IOCB_BUSY - Busy
+ **/
+static inline int
+__lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
+ struct lpfc_iocbq *piocb, uint32_t flag)
+{
+ return phba->__lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
+}
+
+/**
+ * lpfc_sli_api_table_setup - Set up sli api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the SLI interface API function jump table in @phba
+ * struct.
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_sli_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+
+ switch (dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ phba->__lpfc_sli_issue_iocb = __lpfc_sli_issue_iocb_s3;
+ phba->__lpfc_sli_release_iocbq = __lpfc_sli_release_iocbq_s3;
+ break;
+ case LPFC_PCI_DEV_OC:
+ phba->__lpfc_sli_issue_iocb = __lpfc_sli_issue_iocb_s4;
+ phba->__lpfc_sli_release_iocbq = __lpfc_sli_release_iocbq_s4;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1419 Invalid HBA PCI-device group: 0x%x\n",
+ dev_grp);
+ return -ENODEV;
+ break;
+ }
+ phba->lpfc_get_iocb_from_iocbq = lpfc_get_iocb_from_iocbq;
+ return 0;
+}
/**
* lpfc_sli_issue_iocb - Wrapper function for __lpfc_sli_issue_iocb
@@ -3848,14 +6126,14 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
* functions which do not hold hbalock.
**/
int
-lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
struct lpfc_iocbq *piocb, uint32_t flag)
{
unsigned long iflags;
int rc;
spin_lock_irqsave(&phba->hbalock, iflags);
- rc = __lpfc_sli_issue_iocb(phba, pring, piocb, flag);
+ rc = __lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
spin_unlock_irqrestore(&phba->hbalock, iflags);
return rc;
@@ -4148,6 +6426,52 @@ lpfc_sli_queue_setup(struct lpfc_hba *phba)
}
/**
+ * lpfc_sli_mbox_sys_flush - Flush mailbox command sub-system
+ * @phba: Pointer to HBA context object.
+ *
+ * This routine flushes the mailbox command subsystem. It will unconditionally
+ * flush all the mailbox commands in the three possible stages in the mailbox
+ * command sub-system: pending mailbox command queue; the outstanding mailbox
+ * command; and completed mailbox command queue. It is caller's responsibility
+ * to make sure that the driver is in the proper state to flush the mailbox
+ * command sub-system. Namely, the posting of mailbox commands into the
+ * pending mailbox command queue from the various clients must be stopped;
+ * either the HBA is in a state that it will never works on the outstanding
+ * mailbox command (such as in EEH or ERATT conditions) or the outstanding
+ * mailbox command has been completed.
+ **/
+static void
+lpfc_sli_mbox_sys_flush(struct lpfc_hba *phba)
+{
+ LIST_HEAD(completions);
+ struct lpfc_sli *psli = &phba->sli;
+ LPFC_MBOXQ_t *pmb;
+ unsigned long iflag;
+
+ /* Flush all the mailbox commands in the mbox system */
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ /* The pending mailbox command queue */
+ list_splice_init(&phba->sli.mboxq, &completions);
+ /* The outstanding active mailbox command */
+ if (psli->mbox_active) {
+ list_add_tail(&psli->mbox_active->list, &completions);
+ psli->mbox_active = NULL;
+ psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ }
+ /* The completed mailbox command queue */
+ list_splice_init(&phba->sli.mboxq_cmpl, &completions);
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+
+ /* Return all flushed mailbox commands with MBX_NOT_FINISHED status */
+ while (!list_empty(&completions)) {
+ list_remove_head(&completions, pmb, LPFC_MBOXQ_t, list);
+ pmb->u.mb.mbxStatus = MBX_NOT_FINISHED;
+ if (pmb->mbox_cmpl)
+ pmb->mbox_cmpl(phba, pmb);
+ }
+}
+
+/**
* lpfc_sli_host_down - Vport cleanup function
* @vport: Pointer to virtual port object.
*
@@ -4240,9 +6564,11 @@ lpfc_sli_hba_down(struct lpfc_hba *phba)
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
struct lpfc_dmabuf *buf_ptr;
- LPFC_MBOXQ_t *pmb;
- int i;
unsigned long flags = 0;
+ int i;
+
+ /* Shutdown the mailbox command sub-system */
+ lpfc_sli_mbox_sys_shutdown(phba);
lpfc_hba_down_prep(phba);
@@ -4287,28 +6613,42 @@ lpfc_sli_hba_down(struct lpfc_hba *phba)
/* Return any active mbox cmds */
del_timer_sync(&psli->mbox_tmo);
- spin_lock_irqsave(&phba->hbalock, flags);
- spin_lock(&phba->pport->work_port_lock);
+ spin_lock_irqsave(&phba->pport->work_port_lock, flags);
phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
- spin_unlock(&phba->pport->work_port_lock);
+ spin_unlock_irqrestore(&phba->pport->work_port_lock, flags);
- /* Return any pending or completed mbox cmds */
- list_splice_init(&phba->sli.mboxq, &completions);
- if (psli->mbox_active) {
- list_add_tail(&psli->mbox_active->list, &completions);
- psli->mbox_active = NULL;
- psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
- }
- list_splice_init(&phba->sli.mboxq_cmpl, &completions);
- spin_unlock_irqrestore(&phba->hbalock, flags);
+ return 1;
+}
+
+/**
+ * lpfc_sli4_hba_down - PCI function resource cleanup for the SLI4 HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function cleans up all queues, iocb, buffers, mailbox commands while
+ * shutting down the SLI4 HBA FCoE function. This function is called with no
+ * lock held and always returns 1.
+ *
+ * This function does the following to cleanup driver FCoE function resources:
+ * - Free discovery resources for each virtual port
+ * - Cleanup any pending fabric iocbs
+ * - Iterate through the iocb txq and free each entry in the list.
+ * - Free up any buffer posted to the HBA.
+ * - Clean up all the queue entries: WQ, RQ, MQ, EQ, CQ, etc.
+ * - Free mailbox commands in the mailbox queue.
+ **/
+int
+lpfc_sli4_hba_down(struct lpfc_hba *phba)
+{
+ /* Stop the SLI4 device port */
+ lpfc_stop_port(phba);
+
+ /* Tear down the queues in the HBA */
+ lpfc_sli4_queue_unset(phba);
+
+ /* unregister default FCFI from the HBA */
+ lpfc_sli4_fcfi_unreg(phba, phba->fcf.fcfi);
- while (!list_empty(&completions)) {
- list_remove_head(&completions, pmb, LPFC_MBOXQ_t, list);
- pmb->mb.mbxStatus = MBX_NOT_FINISHED;
- if (pmb->mbox_cmpl)
- pmb->mbox_cmpl(phba,pmb);
- }
return 1;
}
@@ -4639,7 +6979,10 @@ lpfc_sli_issue_abort_iotag(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
iabt = &abtsiocbp->iocb;
iabt->un.acxri.abortType = ABORT_TYPE_ABTS;
iabt->un.acxri.abortContextTag = icmd->ulpContext;
- iabt->un.acxri.abortIoTag = icmd->ulpIoTag;
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ iabt->un.acxri.abortIoTag = cmdiocb->sli4_xritag;
+ else
+ iabt->un.acxri.abortIoTag = icmd->ulpIoTag;
iabt->ulpLe = 1;
iabt->ulpClass = icmd->ulpClass;
@@ -4655,7 +6998,7 @@ lpfc_sli_issue_abort_iotag(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
"abort cmd iotag x%x\n",
iabt->un.acxri.abortContextTag,
iabt->un.acxri.abortIoTag, abtsiocbp->iotag);
- retval = __lpfc_sli_issue_iocb(phba, pring, abtsiocbp, 0);
+ retval = __lpfc_sli_issue_iocb(phba, pring->ringno, abtsiocbp, 0);
if (retval)
__lpfc_sli_release_iocbq(phba, abtsiocbp);
@@ -4838,7 +7181,10 @@ lpfc_sli_abort_iocb(struct lpfc_vport *vport, struct lpfc_sli_ring *pring,
cmd = &iocbq->iocb;
abtsiocb->iocb.un.acxri.abortType = ABORT_TYPE_ABTS;
abtsiocb->iocb.un.acxri.abortContextTag = cmd->ulpContext;
- abtsiocb->iocb.un.acxri.abortIoTag = cmd->ulpIoTag;
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ abtsiocb->iocb.un.acxri.abortIoTag = iocbq->sli4_xritag;
+ else
+ abtsiocb->iocb.un.acxri.abortIoTag = cmd->ulpIoTag;
abtsiocb->iocb.ulpLe = 1;
abtsiocb->iocb.ulpClass = cmd->ulpClass;
abtsiocb->vport = phba->pport;
@@ -4850,7 +7196,8 @@ lpfc_sli_abort_iocb(struct lpfc_vport *vport, struct lpfc_sli_ring *pring,
/* Setup callback routine and issue the command. */
abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
- ret_val = lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0);
+ ret_val = lpfc_sli_issue_iocb(phba, pring->ringno,
+ abtsiocb, 0);
if (ret_val == IOCB_ERROR) {
lpfc_sli_release_iocbq(phba, abtsiocb);
errcnt++;
@@ -4931,7 +7278,7 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba,
**/
int
lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba,
- struct lpfc_sli_ring *pring,
+ uint32_t ring_number,
struct lpfc_iocbq *piocb,
struct lpfc_iocbq *prspiocbq,
uint32_t timeout)
@@ -4962,7 +7309,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba,
readl(phba->HCregaddr); /* flush */
}
- retval = lpfc_sli_issue_iocb(phba, pring, piocb, 0);
+ retval = lpfc_sli_issue_iocb(phba, ring_number, piocb, 0);
if (retval == IOCB_SUCCESS) {
timeout_req = timeout * HZ;
timeleft = wait_event_timeout(done_q,
@@ -5077,53 +7424,156 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq,
}
/**
- * lpfc_sli_flush_mbox_queue - mailbox queue cleanup function
+ * lpfc_sli_mbox_sys_shutdown - shutdown mailbox command sub-system
* @phba: Pointer to HBA context.
*
- * This function is called to cleanup any pending mailbox
- * objects in the driver queue before bringing the HBA offline.
- * This function is called while resetting the HBA.
- * The function is called without any lock held. The function
- * takes hbalock to update SLI data structure.
- * This function returns 1 when there is an active mailbox
- * command pending else returns 0.
+ * This function is called to shutdown the driver's mailbox sub-system.
+ * It first marks the mailbox sub-system is in a block state to prevent
+ * the asynchronous mailbox command from issued off the pending mailbox
+ * command queue. If the mailbox command sub-system shutdown is due to
+ * HBA error conditions such as EEH or ERATT, this routine shall invoke
+ * the mailbox sub-system flush routine to forcefully bring down the
+ * mailbox sub-system. Otherwise, if it is due to normal condition (such
+ * as with offline or HBA function reset), this routine will wait for the
+ * outstanding mailbox command to complete before invoking the mailbox
+ * sub-system flush routine to gracefully bring down mailbox sub-system.
**/
-int
-lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba)
+void
+lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba)
{
- struct lpfc_vport *vport = phba->pport;
- int i = 0;
- uint32_t ha_copy;
+ struct lpfc_sli *psli = &phba->sli;
+ uint8_t actcmd = MBX_HEARTBEAT;
+ unsigned long timeout;
- while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE && !vport->stopped) {
- if (i++ > LPFC_MBOX_TMO * 1000)
- return 1;
+ spin_lock_irq(&phba->hbalock);
+ psli->sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
+ spin_unlock_irq(&phba->hbalock);
- /*
- * Call lpfc_sli_handle_mb_event only if a mailbox cmd
- * did finish. This way we won't get the misleading
- * "Stray Mailbox Interrupt" message.
- */
+ if (psli->sli_flag & LPFC_SLI_ACTIVE) {
spin_lock_irq(&phba->hbalock);
- ha_copy = phba->work_ha;
- phba->work_ha &= ~HA_MBATT;
+ if (phba->sli.mbox_active)
+ actcmd = phba->sli.mbox_active->u.mb.mbxCommand;
spin_unlock_irq(&phba->hbalock);
+ /* Determine how long we might wait for the active mailbox
+ * command to be gracefully completed by firmware.
+ */
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, actcmd) *
+ 1000) + jiffies;
+ while (phba->sli.mbox_active) {
+ /* Check active mailbox complete status every 2ms */
+ msleep(2);
+ if (time_after(jiffies, timeout))
+ /* Timeout, let the mailbox flush routine to
+ * forcefully release active mailbox command
+ */
+ break;
+ }
+ }
+ lpfc_sli_mbox_sys_flush(phba);
+}
+
+/**
+ * lpfc_sli_eratt_read - read sli-3 error attention events
+ * @phba: Pointer to HBA context.
+ *
+ * This function is called to read the SLI3 device error attention registers
+ * for possible error attention events. The caller must hold the hostlock
+ * with spin_lock_irq().
+ *
+ * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * Register and returns 0 otherwise.
+ **/
+static int
+lpfc_sli_eratt_read(struct lpfc_hba *phba)
+{
+ uint32_t ha_copy;
- if (ha_copy & HA_MBATT)
- if (lpfc_sli_handle_mb_event(phba) == 0)
- i = 0;
+ /* Read chip Host Attention (HA) register */
+ ha_copy = readl(phba->HAregaddr);
+ if (ha_copy & HA_ERATT) {
+ /* Read host status register to retrieve error event */
+ lpfc_sli_read_hs(phba);
+
+ /* Check if there is a deferred error condition is active */
+ if ((HS_FFER1 & phba->work_hs) &&
+ ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
+ HS_FFER6 | HS_FFER7) & phba->work_hs)) {
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag |= DEFER_ERATT;
+ spin_unlock_irq(&phba->hbalock);
+ /* Clear all interrupt enable conditions */
+ writel(0, phba->HCregaddr);
+ readl(phba->HCregaddr);
+ }
- msleep(1);
+ /* Set the driver HA work bitmap */
+ spin_lock_irq(&phba->hbalock);
+ phba->work_ha |= HA_ERATT;
+ /* Indicate polling handles this ERATT */
+ phba->hba_flag |= HBA_ERATT_HANDLED;
+ spin_unlock_irq(&phba->hbalock);
+ return 1;
}
+ return 0;
+}
+
+/**
+ * lpfc_sli4_eratt_read - read sli-4 error attention events
+ * @phba: Pointer to HBA context.
+ *
+ * This function is called to read the SLI4 device error attention registers
+ * for possible error attention events. The caller must hold the hostlock
+ * with spin_lock_irq().
+ *
+ * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * Register and returns 0 otherwise.
+ **/
+static int
+lpfc_sli4_eratt_read(struct lpfc_hba *phba)
+{
+ uint32_t uerr_sta_hi, uerr_sta_lo;
+ uint32_t onlnreg0, onlnreg1;
- return (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) ? 1 : 0;
+ /* For now, use the SLI4 device internal unrecoverable error
+ * registers for error attention. This can be changed later.
+ */
+ onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
+ onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
+ if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
+ uerr_sta_lo = readl(phba->sli4_hba.UERRLOregaddr);
+ uerr_sta_hi = readl(phba->sli4_hba.UERRHIregaddr);
+ if (uerr_sta_lo || uerr_sta_hi) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1423 HBA Unrecoverable error: "
+ "uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
+ "online0_reg=0x%x, online1_reg=0x%x\n",
+ uerr_sta_lo, uerr_sta_hi,
+ onlnreg0, onlnreg1);
+ /* TEMP: as the driver error recover logic is not
+ * fully developed, we just log the error message
+ * and the device error attention action is now
+ * temporarily disabled.
+ */
+ return 0;
+ phba->work_status[0] = uerr_sta_lo;
+ phba->work_status[1] = uerr_sta_hi;
+ spin_lock_irq(&phba->hbalock);
+ /* Set the driver HA work bitmap */
+ phba->work_ha |= HA_ERATT;
+ /* Indicate polling handles this ERATT */
+ phba->hba_flag |= HBA_ERATT_HANDLED;
+ spin_unlock_irq(&phba->hbalock);
+ return 1;
+ }
+ }
+ return 0;
}
/**
* lpfc_sli_check_eratt - check error attention events
* @phba: Pointer to HBA context.
*
- * This function is called form timer soft interrupt context to check HBA's
+ * This function is called from timer soft interrupt context to check HBA's
* error attention register bit for error attention events.
*
* This fucntion returns 1 when there is Error Attention in the Host Attention
@@ -5134,10 +7584,6 @@ lpfc_sli_check_eratt(struct lpfc_hba *phba)
{
uint32_t ha_copy;
- /* If PCI channel is offline, don't process it */
- if (unlikely(pci_channel_offline(phba->pcidev)))
- return 0;
-
/* If somebody is waiting to handle an eratt, don't process it
* here. The brdkill function will do this.
*/
@@ -5161,56 +7607,84 @@ lpfc_sli_check_eratt(struct lpfc_hba *phba)
return 0;
}
- /* Read chip Host Attention (HA) register */
- ha_copy = readl(phba->HAregaddr);
- if (ha_copy & HA_ERATT) {
- /* Read host status register to retrieve error event */
- lpfc_sli_read_hs(phba);
-
- /* Check if there is a deferred error condition is active */
- if ((HS_FFER1 & phba->work_hs) &&
- ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
- HS_FFER6 | HS_FFER7) & phba->work_hs)) {
- phba->hba_flag |= DEFER_ERATT;
- /* Clear all interrupt enable conditions */
- writel(0, phba->HCregaddr);
- readl(phba->HCregaddr);
- }
-
- /* Set the driver HA work bitmap */
- phba->work_ha |= HA_ERATT;
- /* Indicate polling handles this ERATT */
- phba->hba_flag |= HBA_ERATT_HANDLED;
+ /* If PCI channel is offline, don't process it */
+ if (unlikely(pci_channel_offline(phba->pcidev))) {
spin_unlock_irq(&phba->hbalock);
- return 1;
+ return 0;
+ }
+
+ switch (phba->sli_rev) {
+ case LPFC_SLI_REV2:
+ case LPFC_SLI_REV3:
+ /* Read chip Host Attention (HA) register */
+ ha_copy = lpfc_sli_eratt_read(phba);
+ break;
+ case LPFC_SLI_REV4:
+ /* Read devcie Uncoverable Error (UERR) registers */
+ ha_copy = lpfc_sli4_eratt_read(phba);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0299 Invalid SLI revision (%d)\n",
+ phba->sli_rev);
+ ha_copy = 0;
+ break;
}
spin_unlock_irq(&phba->hbalock);
+
+ return ha_copy;
+}
+
+/**
+ * lpfc_intr_state_check - Check device state for interrupt handling
+ * @phba: Pointer to HBA context.
+ *
+ * This inline routine checks whether a device or its PCI slot is in a state
+ * that the interrupt should be handled.
+ *
+ * This function returns 0 if the device or the PCI slot is in a state that
+ * interrupt should be handled, otherwise -EIO.
+ */
+static inline int
+lpfc_intr_state_check(struct lpfc_hba *phba)
+{
+ /* If the pci channel is offline, ignore all the interrupts */
+ if (unlikely(pci_channel_offline(phba->pcidev)))
+ return -EIO;
+
+ /* Update device level interrupt statistics */
+ phba->sli.slistat.sli_intr++;
+
+ /* Ignore all interrupts during initialization. */
+ if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+ return -EIO;
+
return 0;
}
/**
- * lpfc_sp_intr_handler - The slow-path interrupt handler of lpfc driver
+ * lpfc_sli_sp_intr_handler - Slow-path interrupt handler to SLI-3 device
* @irq: Interrupt number.
* @dev_id: The device context pointer.
*
* This function is directly called from the PCI layer as an interrupt
- * service routine when the device is enabled with MSI-X multi-message
- * interrupt mode and there are slow-path events in the HBA. However,
- * when the device is enabled with either MSI or Pin-IRQ interrupt mode,
- * this function is called as part of the device-level interrupt handler.
- * When the PCI slot is in error recovery or the HBA is undergoing
- * initialization, the interrupt handler will not process the interrupt.
- * The link attention and ELS ring attention events are handled by the
- * worker thread. The interrupt handler signals the worker thread and
- * and returns for these events. This function is called without any
- * lock held. It gets the hbalock to access and update SLI data
+ * service routine when device with SLI-3 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there are slow-path events in
+ * the HBA. However, when the device is enabled with either MSI or Pin-IRQ
+ * interrupt mode, this function is called as part of the device-level
+ * interrupt handler. When the PCI slot is in error recovery or the HBA
+ * is undergoing initialization, the interrupt handler will not process
+ * the interrupt. The link attention and ELS ring attention events are
+ * handled by the worker thread. The interrupt handler signals the worker
+ * thread and returns for these events. This function is called without
+ * any lock held. It gets the hbalock to access and update SLI data
* structures.
*
* This function returns IRQ_HANDLED when interrupt is handled else it
* returns IRQ_NONE.
**/
irqreturn_t
-lpfc_sp_intr_handler(int irq, void *dev_id)
+lpfc_sli_sp_intr_handler(int irq, void *dev_id)
{
struct lpfc_hba *phba;
uint32_t ha_copy;
@@ -5240,13 +7714,8 @@ lpfc_sp_intr_handler(int irq, void *dev_id)
* individual interrupt handler in MSI-X multi-message interrupt mode
*/
if (phba->intr_type == MSIX) {
- /* If the pci channel is offline, ignore all the interrupts */
- if (unlikely(pci_channel_offline(phba->pcidev)))
- return IRQ_NONE;
- /* Update device-level interrupt statistics */
- phba->sli.slistat.sli_intr++;
- /* Ignore all interrupts during initialization. */
- if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+ /* Check device state for handling interrupt */
+ if (lpfc_intr_state_check(phba))
return IRQ_NONE;
/* Need to read HA REG for slow-path events */
spin_lock_irqsave(&phba->hbalock, iflag);
@@ -5271,7 +7740,7 @@ lpfc_sp_intr_handler(int irq, void *dev_id)
* interrupt.
*/
if (unlikely(phba->hba_flag & DEFER_ERATT)) {
- spin_unlock_irq(&phba->hbalock);
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
return IRQ_NONE;
}
@@ -5364,7 +7833,7 @@ lpfc_sp_intr_handler(int irq, void *dev_id)
if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active)) {
pmb = phba->sli.mbox_active;
- pmbox = &pmb->mb;
+ pmbox = &pmb->u.mb;
mbox = phba->mbox;
vport = pmb->vport;
@@ -5434,7 +7903,8 @@ lpfc_sp_intr_handler(int irq, void *dev_id)
LOG_MBOX | LOG_SLI,
"0350 rc should have"
"been MBX_BUSY");
- goto send_current_mbox;
+ if (rc != MBX_NOT_FINISHED)
+ goto send_current_mbox;
}
}
spin_lock_irqsave(
@@ -5471,29 +7941,29 @@ send_current_mbox:
}
return IRQ_HANDLED;
-} /* lpfc_sp_intr_handler */
+} /* lpfc_sli_sp_intr_handler */
/**
- * lpfc_fp_intr_handler - The fast-path interrupt handler of lpfc driver
+ * lpfc_sli_fp_intr_handler - Fast-path interrupt handler to SLI-3 device.
* @irq: Interrupt number.
* @dev_id: The device context pointer.
*
* This function is directly called from the PCI layer as an interrupt
- * service routine when the device is enabled with MSI-X multi-message
- * interrupt mode and there is a fast-path FCP IOCB ring event in the
- * HBA. However, when the device is enabled with either MSI or Pin-IRQ
- * interrupt mode, this function is called as part of the device-level
- * interrupt handler. When the PCI slot is in error recovery or the HBA
- * is undergoing initialization, the interrupt handler will not process
- * the interrupt. The SCSI FCP fast-path ring event are handled in the
- * intrrupt context. This function is called without any lock held. It
- * gets the hbalock to access and update SLI data structures.
+ * service routine when device with SLI-3 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there is a fast-path FCP IOCB
+ * ring event in the HBA. However, when the device is enabled with either
+ * MSI or Pin-IRQ interrupt mode, this function is called as part of the
+ * device-level interrupt handler. When the PCI slot is in error recovery
+ * or the HBA is undergoing initialization, the interrupt handler will not
+ * process the interrupt. The SCSI FCP fast-path ring event are handled in
+ * the intrrupt context. This function is called without any lock held.
+ * It gets the hbalock to access and update SLI data structures.
*
* This function returns IRQ_HANDLED when interrupt is handled else it
* returns IRQ_NONE.
**/
irqreturn_t
-lpfc_fp_intr_handler(int irq, void *dev_id)
+lpfc_sli_fp_intr_handler(int irq, void *dev_id)
{
struct lpfc_hba *phba;
uint32_t ha_copy;
@@ -5513,13 +7983,8 @@ lpfc_fp_intr_handler(int irq, void *dev_id)
* individual interrupt handler in MSI-X multi-message interrupt mode
*/
if (phba->intr_type == MSIX) {
- /* If pci channel is offline, ignore all the interrupts */
- if (unlikely(pci_channel_offline(phba->pcidev)))
- return IRQ_NONE;
- /* Update device-level interrupt statistics */
- phba->sli.slistat.sli_intr++;
- /* Ignore all interrupts during initialization. */
- if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+ /* Check device state for handling interrupt */
+ if (lpfc_intr_state_check(phba))
return IRQ_NONE;
/* Need to read HA REG for FCP ring and other ring events */
ha_copy = readl(phba->HAregaddr);
@@ -5530,7 +7995,7 @@ lpfc_fp_intr_handler(int irq, void *dev_id)
* any interrupt.
*/
if (unlikely(phba->hba_flag & DEFER_ERATT)) {
- spin_unlock_irq(&phba->hbalock);
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
return IRQ_NONE;
}
writel((ha_copy & (HA_R0_CLR_MSK | HA_R1_CLR_MSK)),
@@ -5566,26 +8031,27 @@ lpfc_fp_intr_handler(int irq, void *dev_id)
}
}
return IRQ_HANDLED;
-} /* lpfc_fp_intr_handler */
+} /* lpfc_sli_fp_intr_handler */
/**
- * lpfc_intr_handler - The device-level interrupt handler of lpfc driver
+ * lpfc_sli_intr_handler - Device-level interrupt handler to SLI-3 device
* @irq: Interrupt number.
* @dev_id: The device context pointer.
*
- * This function is the device-level interrupt handler called from the PCI
- * layer when either MSI or Pin-IRQ interrupt mode is enabled and there is
- * an event in the HBA which requires driver attention. This function
- * invokes the slow-path interrupt attention handling function and fast-path
- * interrupt attention handling function in turn to process the relevant
- * HBA attention events. This function is called without any lock held. It
- * gets the hbalock to access and update SLI data structures.
+ * This function is the HBA device-level interrupt handler to device with
+ * SLI-3 interface spec, called from the PCI layer when either MSI or
+ * Pin-IRQ interrupt mode is enabled and there is an event in the HBA which
+ * requires driver attention. This function invokes the slow-path interrupt
+ * attention handling function and fast-path interrupt attention handling
+ * function in turn to process the relevant HBA attention events. This
+ * function is called without any lock held. It gets the hbalock to access
+ * and update SLI data structures.
*
* This function returns IRQ_HANDLED when interrupt is handled, else it
* returns IRQ_NONE.
**/
irqreturn_t
-lpfc_intr_handler(int irq, void *dev_id)
+lpfc_sli_intr_handler(int irq, void *dev_id)
{
struct lpfc_hba *phba;
irqreturn_t sp_irq_rc, fp_irq_rc;
@@ -5600,15 +8066,8 @@ lpfc_intr_handler(int irq, void *dev_id)
if (unlikely(!phba))
return IRQ_NONE;
- /* If the pci channel is offline, ignore all the interrupts. */
- if (unlikely(pci_channel_offline(phba->pcidev)))
- return IRQ_NONE;
-
- /* Update device level interrupt statistics */
- phba->sli.slistat.sli_intr++;
-
- /* Ignore all interrupts during initialization. */
- if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+ /* Check device state for handling interrupt */
+ if (lpfc_intr_state_check(phba))
return IRQ_NONE;
spin_lock(&phba->hbalock);
@@ -5650,7 +8109,7 @@ lpfc_intr_handler(int irq, void *dev_id)
status2 >>= (4*LPFC_ELS_RING);
if (status1 || (status2 & HA_RXMASK))
- sp_irq_rc = lpfc_sp_intr_handler(irq, dev_id);
+ sp_irq_rc = lpfc_sli_sp_intr_handler(irq, dev_id);
else
sp_irq_rc = IRQ_NONE;
@@ -5670,10 +8129,3322 @@ lpfc_intr_handler(int irq, void *dev_id)
status2 = 0;
if ((status1 & HA_RXMASK) || (status2 & HA_RXMASK))
- fp_irq_rc = lpfc_fp_intr_handler(irq, dev_id);
+ fp_irq_rc = lpfc_sli_fp_intr_handler(irq, dev_id);
else
fp_irq_rc = IRQ_NONE;
/* Return device-level interrupt handling status */
return (sp_irq_rc == IRQ_HANDLED) ? sp_irq_rc : fp_irq_rc;
-} /* lpfc_intr_handler */
+} /* lpfc_sli_intr_handler */
+
+/**
+ * lpfc_sli4_fcp_xri_abort_event_proc - Process fcp xri abort event
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked by the worker thread to process all the pending
+ * SLI4 FCP abort XRI events.
+ **/
+void lpfc_sli4_fcp_xri_abort_event_proc(struct lpfc_hba *phba)
+{
+ struct lpfc_cq_event *cq_event;
+
+ /* First, declare the fcp xri abort event has been handled */
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~FCP_XRI_ABORT_EVENT;
+ spin_unlock_irq(&phba->hbalock);
+ /* Now, handle all the fcp xri abort events */
+ while (!list_empty(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue)) {
+ /* Get the first event from the head of the event queue */
+ spin_lock_irq(&phba->hbalock);
+ list_remove_head(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue,
+ cq_event, struct lpfc_cq_event, list);
+ spin_unlock_irq(&phba->hbalock);
+ /* Notify aborted XRI for FCP work queue */
+ lpfc_sli4_fcp_xri_aborted(phba, &cq_event->cqe.wcqe_axri);
+ /* Free the event processed back to the free pool */
+ lpfc_sli4_cq_event_release(phba, cq_event);
+ }
+}
+
+/**
+ * lpfc_sli4_els_xri_abort_event_proc - Process els xri abort event
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked by the worker thread to process all the pending
+ * SLI4 els abort xri events.
+ **/
+void lpfc_sli4_els_xri_abort_event_proc(struct lpfc_hba *phba)
+{
+ struct lpfc_cq_event *cq_event;
+
+ /* First, declare the els xri abort event has been handled */
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~ELS_XRI_ABORT_EVENT;
+ spin_unlock_irq(&phba->hbalock);
+ /* Now, handle all the els xri abort events */
+ while (!list_empty(&phba->sli4_hba.sp_els_xri_aborted_work_queue)) {
+ /* Get the first event from the head of the event queue */
+ spin_lock_irq(&phba->hbalock);
+ list_remove_head(&phba->sli4_hba.sp_els_xri_aborted_work_queue,
+ cq_event, struct lpfc_cq_event, list);
+ spin_unlock_irq(&phba->hbalock);
+ /* Notify aborted XRI for ELS work queue */
+ lpfc_sli4_els_xri_aborted(phba, &cq_event->cqe.wcqe_axri);
+ /* Free the event processed back to the free pool */
+ lpfc_sli4_cq_event_release(phba, cq_event);
+ }
+}
+
+static void
+lpfc_sli4_iocb_param_transfer(struct lpfc_iocbq *pIocbIn,
+ struct lpfc_iocbq *pIocbOut,
+ struct lpfc_wcqe_complete *wcqe)
+{
+ size_t offset = offsetof(struct lpfc_iocbq, iocb);
+
+ memcpy((char *)pIocbIn + offset, (char *)pIocbOut + offset,
+ sizeof(struct lpfc_iocbq) - offset);
+ memset(&pIocbIn->sli4_info, 0,
+ sizeof(struct lpfc_sli4_rspiocb_info));
+ /* Map WCQE parameters into irspiocb parameters */
+ pIocbIn->iocb.ulpStatus = bf_get(lpfc_wcqe_c_status, wcqe);
+ if (pIocbOut->iocb_flag & LPFC_IO_FCP)
+ if (pIocbIn->iocb.ulpStatus == IOSTAT_FCP_RSP_ERROR)
+ pIocbIn->iocb.un.fcpi.fcpi_parm =
+ pIocbOut->iocb.un.fcpi.fcpi_parm -
+ wcqe->total_data_placed;
+ else
+ pIocbIn->iocb.un.ulpWord[4] = wcqe->parameter;
+ else
+ pIocbIn->iocb.un.ulpWord[4] = wcqe->parameter;
+ /* Load in additional WCQE parameters */
+ pIocbIn->sli4_info.hw_status = bf_get(lpfc_wcqe_c_hw_status, wcqe);
+ pIocbIn->sli4_info.bfield = 0;
+ if (bf_get(lpfc_wcqe_c_xb, wcqe))
+ pIocbIn->sli4_info.bfield |= LPFC_XB;
+ if (bf_get(lpfc_wcqe_c_pv, wcqe)) {
+ pIocbIn->sli4_info.bfield |= LPFC_PV;
+ pIocbIn->sli4_info.priority =
+ bf_get(lpfc_wcqe_c_priority, wcqe);
+ }
+}
+
+/**
+ * lpfc_sli4_sp_handle_async_event - Handle an asynchroous event
+ * @phba: Pointer to HBA context object.
+ * @cqe: Pointer to mailbox completion queue entry.
+ *
+ * This routine process a mailbox completion queue entry with asynchrous
+ * event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_async_event(struct lpfc_hba *phba, struct lpfc_mcqe *mcqe)
+{
+ struct lpfc_cq_event *cq_event;
+ unsigned long iflags;
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "0392 Async Event: word0:x%x, word1:x%x, "
+ "word2:x%x, word3:x%x\n", mcqe->word0,
+ mcqe->mcqe_tag0, mcqe->mcqe_tag1, mcqe->trailer);
+
+ /* Allocate a new internal CQ_EVENT entry */
+ cq_event = lpfc_sli4_cq_event_alloc(phba);
+ if (!cq_event) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0394 Failed to allocate CQ_EVENT entry\n");
+ return false;
+ }
+
+ /* Move the CQE into an asynchronous event entry */
+ memcpy(&cq_event->cqe, mcqe, sizeof(struct lpfc_mcqe));
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ list_add_tail(&cq_event->list, &phba->sli4_hba.sp_asynce_work_queue);
+ /* Set the async event flag */
+ phba->hba_flag |= ASYNC_EVENT;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+ return true;
+}
+
+/**
+ * lpfc_sli4_sp_handle_mbox_event - Handle a mailbox completion event
+ * @phba: Pointer to HBA context object.
+ * @cqe: Pointer to mailbox completion queue entry.
+ *
+ * This routine process a mailbox completion queue entry with mailbox
+ * completion event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_mbox_event(struct lpfc_hba *phba, struct lpfc_mcqe *mcqe)
+{
+ uint32_t mcqe_status;
+ MAILBOX_t *mbox, *pmbox;
+ struct lpfc_mqe *mqe;
+ struct lpfc_vport *vport;
+ struct lpfc_nodelist *ndlp;
+ struct lpfc_dmabuf *mp;
+ unsigned long iflags;
+ LPFC_MBOXQ_t *pmb;
+ bool workposted = false;
+ int rc;
+
+ /* If not a mailbox complete MCQE, out by checking mailbox consume */
+ if (!bf_get(lpfc_trailer_completed, mcqe))
+ goto out_no_mqe_complete;
+
+ /* Get the reference to the active mbox command */
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ pmb = phba->sli.mbox_active;
+ if (unlikely(!pmb)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+ "1832 No pending MBOX command to handle\n");
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ goto out_no_mqe_complete;
+ }
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ mqe = &pmb->u.mqe;
+ pmbox = (MAILBOX_t *)&pmb->u.mqe;
+ mbox = phba->mbox;
+ vport = pmb->vport;
+
+ /* Reset heartbeat timer */
+ phba->last_completion_time = jiffies;
+ del_timer(&phba->sli.mbox_tmo);
+
+ /* Move mbox data to caller's mailbox region, do endian swapping */
+ if (pmb->mbox_cmpl && mbox)
+ lpfc_sli_pcimem_bcopy(mbox, mqe, sizeof(struct lpfc_mqe));
+ /* Set the mailbox status with SLI4 range 0x4000 */
+ mcqe_status = bf_get(lpfc_mcqe_status, mcqe);
+ if (mcqe_status != MB_CQE_STATUS_SUCCESS)
+ bf_set(lpfc_mqe_status, mqe,
+ (LPFC_MBX_ERROR_RANGE | mcqe_status));
+
+ if (pmb->mbox_flag & LPFC_MBX_IMED_UNREG) {
+ pmb->mbox_flag &= ~LPFC_MBX_IMED_UNREG;
+ lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_MBOX_VPORT,
+ "MBOX dflt rpi: status:x%x rpi:x%x",
+ mcqe_status,
+ pmbox->un.varWords[0], 0);
+ if (mcqe_status == MB_CQE_STATUS_SUCCESS) {
+ mp = (struct lpfc_dmabuf *)(pmb->context1);
+ ndlp = (struct lpfc_nodelist *)pmb->context2;
+ /* Reg_LOGIN of dflt RPI was successful. Now lets get
+ * RID of the PPI using the same mbox buffer.
+ */
+ lpfc_unreg_login(phba, vport->vpi,
+ pmbox->un.varWords[0], pmb);
+ pmb->mbox_cmpl = lpfc_mbx_cmpl_dflt_rpi;
+ pmb->context1 = mp;
+ pmb->context2 = ndlp;
+ pmb->vport = vport;
+ rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
+ if (rc != MBX_BUSY)
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX |
+ LOG_SLI, "0385 rc should "
+ "have been MBX_BUSY\n");
+ if (rc != MBX_NOT_FINISHED)
+ goto send_current_mbox;
+ }
+ }
+ spin_lock_irqsave(&phba->pport->work_port_lock, iflags);
+ phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
+ spin_unlock_irqrestore(&phba->pport->work_port_lock, iflags);
+
+ /* There is mailbox completion work to do */
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ __lpfc_mbox_cmpl_put(phba, pmb);
+ phba->work_ha |= HA_MBATT;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ workposted = true;
+
+send_current_mbox:
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ /* Release the mailbox command posting token */
+ phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ /* Setting active mailbox pointer need to be in sync to flag clear */
+ phba->sli.mbox_active = NULL;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ /* Wake up worker thread to post the next pending mailbox command */
+ lpfc_worker_wake_up(phba);
+out_no_mqe_complete:
+ if (bf_get(lpfc_trailer_consumed, mcqe))
+ lpfc_sli4_mq_release(phba->sli4_hba.mbx_wq);
+ return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_mcqe - Process a mailbox completion queue entry
+ * @phba: Pointer to HBA context object.
+ * @cqe: Pointer to mailbox completion queue entry.
+ *
+ * This routine process a mailbox completion queue entry, it invokes the
+ * proper mailbox complete handling or asynchrous event handling routine
+ * according to the MCQE's async bit.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_mcqe(struct lpfc_hba *phba, struct lpfc_cqe *cqe)
+{
+ struct lpfc_mcqe mcqe;
+ bool workposted;
+
+ /* Copy the mailbox MCQE and convert endian order as needed */
+ lpfc_sli_pcimem_bcopy(cqe, &mcqe, sizeof(struct lpfc_mcqe));
+
+ /* Invoke the proper event handling routine */
+ if (!bf_get(lpfc_trailer_async, &mcqe))
+ workposted = lpfc_sli4_sp_handle_mbox_event(phba, &mcqe);
+ else
+ workposted = lpfc_sli4_sp_handle_async_event(phba, &mcqe);
+ return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_els_wcqe - Handle els work-queue completion event
+ * @phba: Pointer to HBA context object.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles an ELS work-queue completion event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_els_wcqe(struct lpfc_hba *phba,
+ struct lpfc_wcqe_complete *wcqe)
+{
+ struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
+ struct lpfc_iocbq *cmdiocbq;
+ struct lpfc_iocbq *irspiocbq;
+ unsigned long iflags;
+ bool workposted = false;
+
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ pring->stats.iocb_event++;
+ /* Look up the ELS command IOCB and create pseudo response IOCB */
+ cmdiocbq = lpfc_sli_iocbq_lookup_by_tag(phba, pring,
+ bf_get(lpfc_wcqe_c_request_tag, wcqe));
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+ if (unlikely(!cmdiocbq)) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "0386 ELS complete with no corresponding "
+ "cmdiocb: iotag (%d)\n",
+ bf_get(lpfc_wcqe_c_request_tag, wcqe));
+ return workposted;
+ }
+
+ /* Fake the irspiocbq and copy necessary response information */
+ irspiocbq = lpfc_sli_get_iocbq(phba);
+ if (!irspiocbq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0387 Failed to allocate an iocbq\n");
+ return workposted;
+ }
+ lpfc_sli4_iocb_param_transfer(irspiocbq, cmdiocbq, wcqe);
+
+ /* Add the irspiocb to the response IOCB work list */
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ list_add_tail(&irspiocbq->list, &phba->sli4_hba.sp_rspiocb_work_queue);
+ /* Indicate ELS ring attention */
+ phba->work_ha |= (HA_R0ATT << (4*LPFC_ELS_RING));
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ workposted = true;
+
+ return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_rel_wcqe - Handle slow-path WQ entry consumed event
+ * @phba: Pointer to HBA context object.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles slow-path WQ entry comsumed event by invoking the
+ * proper WQ release routine to the slow-path WQ.
+ **/
+static void
+lpfc_sli4_sp_handle_rel_wcqe(struct lpfc_hba *phba,
+ struct lpfc_wcqe_release *wcqe)
+{
+ /* Check for the slow-path ELS work queue */
+ if (bf_get(lpfc_wcqe_r_wq_id, wcqe) == phba->sli4_hba.els_wq->queue_id)
+ lpfc_sli4_wq_release(phba->sli4_hba.els_wq,
+ bf_get(lpfc_wcqe_r_wqe_index, wcqe));
+ else
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "2579 Slow-path wqe consume event carries "
+ "miss-matched qid: wcqe-qid=x%x, sp-qid=x%x\n",
+ bf_get(lpfc_wcqe_r_wqe_index, wcqe),
+ phba->sli4_hba.els_wq->queue_id);
+}
+
+/**
+ * lpfc_sli4_sp_handle_abort_xri_wcqe - Handle a xri abort event
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to a WQ completion queue.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles an XRI abort event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_abort_xri_wcqe(struct lpfc_hba *phba,
+ struct lpfc_queue *cq,
+ struct sli4_wcqe_xri_aborted *wcqe)
+{
+ bool workposted = false;
+ struct lpfc_cq_event *cq_event;
+ unsigned long iflags;
+
+ /* Allocate a new internal CQ_EVENT entry */
+ cq_event = lpfc_sli4_cq_event_alloc(phba);
+ if (!cq_event) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0602 Failed to allocate CQ_EVENT entry\n");
+ return false;
+ }
+
+ /* Move the CQE into the proper xri abort event list */
+ memcpy(&cq_event->cqe, wcqe, sizeof(struct sli4_wcqe_xri_aborted));
+ switch (cq->subtype) {
+ case LPFC_FCP:
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ list_add_tail(&cq_event->list,
+ &phba->sli4_hba.sp_fcp_xri_aborted_work_queue);
+ /* Set the fcp xri abort event flag */
+ phba->hba_flag |= FCP_XRI_ABORT_EVENT;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ workposted = true;
+ break;
+ case LPFC_ELS:
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ list_add_tail(&cq_event->list,
+ &phba->sli4_hba.sp_els_xri_aborted_work_queue);
+ /* Set the els xri abort event flag */
+ phba->hba_flag |= ELS_XRI_ABORT_EVENT;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ workposted = true;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0603 Invalid work queue CQE subtype (x%x)\n",
+ cq->subtype);
+ workposted = false;
+ break;
+ }
+ return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_wcqe - Process a work-queue completion queue entry
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to the completion queue.
+ * @wcqe: Pointer to a completion queue entry.
+ *
+ * This routine process a slow-path work-queue completion queue entry.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+ struct lpfc_cqe *cqe)
+{
+ struct lpfc_wcqe_complete wcqe;
+ bool workposted = false;
+
+ /* Copy the work queue CQE and convert endian order if needed */
+ lpfc_sli_pcimem_bcopy(cqe, &wcqe, sizeof(struct lpfc_cqe));
+
+ /* Check and process for different type of WCQE and dispatch */
+ switch (bf_get(lpfc_wcqe_c_code, &wcqe)) {
+ case CQE_CODE_COMPL_WQE:
+ /* Process the WQ complete event */
+ workposted = lpfc_sli4_sp_handle_els_wcqe(phba,
+ (struct lpfc_wcqe_complete *)&wcqe);
+ break;
+ case CQE_CODE_RELEASE_WQE:
+ /* Process the WQ release event */
+ lpfc_sli4_sp_handle_rel_wcqe(phba,
+ (struct lpfc_wcqe_release *)&wcqe);
+ break;
+ case CQE_CODE_XRI_ABORTED:
+ /* Process the WQ XRI abort event */
+ workposted = lpfc_sli4_sp_handle_abort_xri_wcqe(phba, cq,
+ (struct sli4_wcqe_xri_aborted *)&wcqe);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0388 Not a valid WCQE code: x%x\n",
+ bf_get(lpfc_wcqe_c_code, &wcqe));
+ break;
+ }
+ return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_rcqe - Process a receive-queue completion queue entry
+ * @phba: Pointer to HBA context object.
+ * @rcqe: Pointer to receive-queue completion queue entry.
+ *
+ * This routine process a receive-queue completion queue entry.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_rcqe(struct lpfc_hba *phba, struct lpfc_cqe *cqe)
+{
+ struct lpfc_rcqe rcqe;
+ bool workposted = false;
+ struct lpfc_queue *hrq = phba->sli4_hba.hdr_rq;
+ struct lpfc_queue *drq = phba->sli4_hba.dat_rq;
+ struct hbq_dmabuf *dma_buf;
+ uint32_t status;
+ unsigned long iflags;
+
+ /* Copy the receive queue CQE and convert endian order if needed */
+ lpfc_sli_pcimem_bcopy(cqe, &rcqe, sizeof(struct lpfc_rcqe));
+ lpfc_sli4_rq_release(hrq, drq);
+ if (bf_get(lpfc_rcqe_code, &rcqe) != CQE_CODE_RECEIVE)
+ goto out;
+ if (bf_get(lpfc_rcqe_rq_id, &rcqe) != hrq->queue_id)
+ goto out;
+
+ status = bf_get(lpfc_rcqe_status, &rcqe);
+ switch (status) {
+ case FC_STATUS_RQ_BUF_LEN_EXCEEDED:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2537 Receive Frame Truncated!!\n");
+ case FC_STATUS_RQ_SUCCESS:
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ dma_buf = lpfc_sli_hbqbuf_get(&phba->hbqs[0].hbq_buffer_list);
+ if (!dma_buf) {
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ goto out;
+ }
+ memcpy(&dma_buf->rcqe, &rcqe, sizeof(rcqe));
+ /* save off the frame for the word thread to process */
+ list_add_tail(&dma_buf->dbuf.list, &phba->rb_pend_list);
+ /* Frame received */
+ phba->hba_flag |= HBA_RECEIVE_BUFFER;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ workposted = true;
+ break;
+ case FC_STATUS_INSUFF_BUF_NEED_BUF:
+ case FC_STATUS_INSUFF_BUF_FRM_DISC:
+ /* Post more buffers if possible */
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ phba->hba_flag |= HBA_POST_RECEIVE_BUFFER;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ workposted = true;
+ break;
+ }
+out:
+ return workposted;
+
+}
+
+/**
+ * lpfc_sli4_sp_handle_eqe - Process a slow-path event queue entry
+ * @phba: Pointer to HBA context object.
+ * @eqe: Pointer to fast-path event queue entry.
+ *
+ * This routine process a event queue entry from the slow-path event queue.
+ * It will check the MajorCode and MinorCode to determine this is for a
+ * completion event on a completion queue, if not, an error shall be logged
+ * and just return. Otherwise, it will get to the corresponding completion
+ * queue and process all the entries on that completion queue, rearm the
+ * completion queue, and then return.
+ *
+ **/
+static void
+lpfc_sli4_sp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe)
+{
+ struct lpfc_queue *cq = NULL, *childq, *speq;
+ struct lpfc_cqe *cqe;
+ bool workposted = false;
+ int ecount = 0;
+ uint16_t cqid;
+
+ if (bf_get(lpfc_eqe_major_code, eqe) != 0 ||
+ bf_get(lpfc_eqe_minor_code, eqe) != 0) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0359 Not a valid slow-path completion "
+ "event: majorcode=x%x, minorcode=x%x\n",
+ bf_get(lpfc_eqe_major_code, eqe),
+ bf_get(lpfc_eqe_minor_code, eqe));
+ return;
+ }
+
+ /* Get the reference to the corresponding CQ */
+ cqid = bf_get(lpfc_eqe_resource_id, eqe);
+
+ /* Search for completion queue pointer matching this cqid */
+ speq = phba->sli4_hba.sp_eq;
+ list_for_each_entry(childq, &speq->child_list, list) {
+ if (childq->queue_id == cqid) {
+ cq = childq;
+ break;
+ }
+ }
+ if (unlikely(!cq)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0365 Slow-path CQ identifier (%d) does "
+ "not exist\n", cqid);
+ return;
+ }
+
+ /* Process all the entries to the CQ */
+ switch (cq->type) {
+ case LPFC_MCQ:
+ while ((cqe = lpfc_sli4_cq_get(cq))) {
+ workposted |= lpfc_sli4_sp_handle_mcqe(phba, cqe);
+ if (!(++ecount % LPFC_GET_QE_REL_INT))
+ lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+ }
+ break;
+ case LPFC_WCQ:
+ while ((cqe = lpfc_sli4_cq_get(cq))) {
+ workposted |= lpfc_sli4_sp_handle_wcqe(phba, cq, cqe);
+ if (!(++ecount % LPFC_GET_QE_REL_INT))
+ lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+ }
+ break;
+ case LPFC_RCQ:
+ while ((cqe = lpfc_sli4_cq_get(cq))) {
+ workposted |= lpfc_sli4_sp_handle_rcqe(phba, cqe);
+ if (!(++ecount % LPFC_GET_QE_REL_INT))
+ lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+ }
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0370 Invalid completion queue type (%d)\n",
+ cq->type);
+ return;
+ }
+
+ /* Catch the no cq entry condition, log an error */
+ if (unlikely(ecount == 0))
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0371 No entry from the CQ: identifier "
+ "(x%x), type (%d)\n", cq->queue_id, cq->type);
+
+ /* In any case, flash and re-arm the RCQ */
+ lpfc_sli4_cq_release(cq, LPFC_QUEUE_REARM);
+
+ /* wake up worker thread if there are works to be done */
+ if (workposted)
+ lpfc_worker_wake_up(phba);
+}
+
+/**
+ * lpfc_sli4_fp_handle_fcp_wcqe - Process fast-path work queue completion entry
+ * @eqe: Pointer to fast-path completion queue entry.
+ *
+ * This routine process a fast-path work queue completion entry from fast-path
+ * event queue for FCP command response completion.
+ **/
+static void
+lpfc_sli4_fp_handle_fcp_wcqe(struct lpfc_hba *phba,
+ struct lpfc_wcqe_complete *wcqe)
+{
+ struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_FCP_RING];
+ struct lpfc_iocbq *cmdiocbq;
+ struct lpfc_iocbq irspiocbq;
+ unsigned long iflags;
+
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ pring->stats.iocb_event++;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+ /* Check for response status */
+ if (unlikely(bf_get(lpfc_wcqe_c_status, wcqe))) {
+ /* If resource errors reported from HBA, reduce queue
+ * depth of the SCSI device.
+ */
+ if ((bf_get(lpfc_wcqe_c_status, wcqe) ==
+ IOSTAT_LOCAL_REJECT) &&
+ (wcqe->parameter == IOERR_NO_RESOURCES)) {
+ phba->lpfc_rampdown_queue_depth(phba);
+ }
+ /* Log the error status */
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "0373 FCP complete error: status=x%x, "
+ "hw_status=x%x, total_data_specified=%d, "
+ "parameter=x%x, word3=x%x\n",
+ bf_get(lpfc_wcqe_c_status, wcqe),
+ bf_get(lpfc_wcqe_c_hw_status, wcqe),
+ wcqe->total_data_placed, wcqe->parameter,
+ wcqe->word3);
+ }
+
+ /* Look up the FCP command IOCB and create pseudo response IOCB */
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ cmdiocbq = lpfc_sli_iocbq_lookup_by_tag(phba, pring,
+ bf_get(lpfc_wcqe_c_request_tag, wcqe));
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ if (unlikely(!cmdiocbq)) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "0374 FCP complete with no corresponding "
+ "cmdiocb: iotag (%d)\n",
+ bf_get(lpfc_wcqe_c_request_tag, wcqe));
+ return;
+ }
+ if (unlikely(!cmdiocbq->iocb_cmpl)) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "0375 FCP cmdiocb not callback function "
+ "iotag: (%d)\n",
+ bf_get(lpfc_wcqe_c_request_tag, wcqe));
+ return;
+ }
+
+ /* Fake the irspiocb and copy necessary response information */
+ lpfc_sli4_iocb_param_transfer(&irspiocbq, cmdiocbq, wcqe);
+
+ /* Pass the cmd_iocb and the rsp state to the upper layer */
+ (cmdiocbq->iocb_cmpl)(phba, cmdiocbq, &irspiocbq);
+}
+
+/**
+ * lpfc_sli4_fp_handle_rel_wcqe - Handle fast-path WQ entry consumed event
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to completion queue.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles an fast-path WQ entry comsumed event by invoking the
+ * proper WQ release routine to the slow-path WQ.
+ **/
+static void
+lpfc_sli4_fp_handle_rel_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+ struct lpfc_wcqe_release *wcqe)
+{
+ struct lpfc_queue *childwq;
+ bool wqid_matched = false;
+ uint16_t fcp_wqid;
+
+ /* Check for fast-path FCP work queue release */
+ fcp_wqid = bf_get(lpfc_wcqe_r_wq_id, wcqe);
+ list_for_each_entry(childwq, &cq->child_list, list) {
+ if (childwq->queue_id == fcp_wqid) {
+ lpfc_sli4_wq_release(childwq,
+ bf_get(lpfc_wcqe_r_wqe_index, wcqe));
+ wqid_matched = true;
+ break;
+ }
+ }
+ /* Report warning log message if no match found */
+ if (wqid_matched != true)
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "2580 Fast-path wqe consume event carries "
+ "miss-matched qid: wcqe-qid=x%x\n", fcp_wqid);
+}
+
+/**
+ * lpfc_sli4_fp_handle_wcqe - Process fast-path work queue completion entry
+ * @cq: Pointer to the completion queue.
+ * @eqe: Pointer to fast-path completion queue entry.
+ *
+ * This routine process a fast-path work queue completion entry from fast-path
+ * event queue for FCP command response completion.
+ **/
+static int
+lpfc_sli4_fp_handle_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+ struct lpfc_cqe *cqe)
+{
+ struct lpfc_wcqe_release wcqe;
+ bool workposted = false;
+
+ /* Copy the work queue CQE and convert endian order if needed */
+ lpfc_sli_pcimem_bcopy(cqe, &wcqe, sizeof(struct lpfc_cqe));
+
+ /* Check and process for different type of WCQE and dispatch */
+ switch (bf_get(lpfc_wcqe_c_code, &wcqe)) {
+ case CQE_CODE_COMPL_WQE:
+ /* Process the WQ complete event */
+ lpfc_sli4_fp_handle_fcp_wcqe(phba,
+ (struct lpfc_wcqe_complete *)&wcqe);
+ break;
+ case CQE_CODE_RELEASE_WQE:
+ /* Process the WQ release event */
+ lpfc_sli4_fp_handle_rel_wcqe(phba, cq,
+ (struct lpfc_wcqe_release *)&wcqe);
+ break;
+ case CQE_CODE_XRI_ABORTED:
+ /* Process the WQ XRI abort event */
+ workposted = lpfc_sli4_sp_handle_abort_xri_wcqe(phba, cq,
+ (struct sli4_wcqe_xri_aborted *)&wcqe);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0144 Not a valid WCQE code: x%x\n",
+ bf_get(lpfc_wcqe_c_code, &wcqe));
+ break;
+ }
+ return workposted;
+}
+
+/**
+ * lpfc_sli4_fp_handle_eqe - Process a fast-path event queue entry
+ * @phba: Pointer to HBA context object.
+ * @eqe: Pointer to fast-path event queue entry.
+ *
+ * This routine process a event queue entry from the fast-path event queue.
+ * It will check the MajorCode and MinorCode to determine this is for a
+ * completion event on a completion queue, if not, an error shall be logged
+ * and just return. Otherwise, it will get to the corresponding completion
+ * queue and process all the entries on the completion queue, rearm the
+ * completion queue, and then return.
+ **/
+static void
+lpfc_sli4_fp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe,
+ uint32_t fcp_cqidx)
+{
+ struct lpfc_queue *cq;
+ struct lpfc_cqe *cqe;
+ bool workposted = false;
+ uint16_t cqid;
+ int ecount = 0;
+
+ if (unlikely(bf_get(lpfc_eqe_major_code, eqe) != 0) ||
+ unlikely(bf_get(lpfc_eqe_minor_code, eqe) != 0)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0366 Not a valid fast-path completion "
+ "event: majorcode=x%x, minorcode=x%x\n",
+ bf_get(lpfc_eqe_major_code, eqe),
+ bf_get(lpfc_eqe_minor_code, eqe));
+ return;
+ }
+
+ cq = phba->sli4_hba.fcp_cq[fcp_cqidx];
+ if (unlikely(!cq)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0367 Fast-path completion queue does not "
+ "exist\n");
+ return;
+ }
+
+ /* Get the reference to the corresponding CQ */
+ cqid = bf_get(lpfc_eqe_resource_id, eqe);
+ if (unlikely(cqid != cq->queue_id)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0368 Miss-matched fast-path completion "
+ "queue identifier: eqcqid=%d, fcpcqid=%d\n",
+ cqid, cq->queue_id);
+ return;
+ }
+
+ /* Process all the entries to the CQ */
+ while ((cqe = lpfc_sli4_cq_get(cq))) {
+ workposted |= lpfc_sli4_fp_handle_wcqe(phba, cq, cqe);
+ if (!(++ecount % LPFC_GET_QE_REL_INT))
+ lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+ }
+
+ /* Catch the no cq entry condition */
+ if (unlikely(ecount == 0))
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0369 No entry from fast-path completion "
+ "queue fcpcqid=%d\n", cq->queue_id);
+
+ /* In any case, flash and re-arm the CQ */
+ lpfc_sli4_cq_release(cq, LPFC_QUEUE_REARM);
+
+ /* wake up worker thread if there are works to be done */
+ if (workposted)
+ lpfc_worker_wake_up(phba);
+}
+
+static void
+lpfc_sli4_eq_flush(struct lpfc_hba *phba, struct lpfc_queue *eq)
+{
+ struct lpfc_eqe *eqe;
+
+ /* walk all the EQ entries and drop on the floor */
+ while ((eqe = lpfc_sli4_eq_get(eq)))
+ ;
+
+ /* Clear and re-arm the EQ */
+ lpfc_sli4_eq_release(eq, LPFC_QUEUE_REARM);
+}
+
+/**
+ * lpfc_sli4_sp_intr_handler - Slow-path interrupt handler to SLI-4 device
+ * @irq: Interrupt number.
+ * @dev_id: The device context pointer.
+ *
+ * This function is directly called from the PCI layer as an interrupt
+ * service routine when device with SLI-4 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there are slow-path events in
+ * the HBA. However, when the device is enabled with either MSI or Pin-IRQ
+ * interrupt mode, this function is called as part of the device-level
+ * interrupt handler. When the PCI slot is in error recovery or the HBA is
+ * undergoing initialization, the interrupt handler will not process the
+ * interrupt. The link attention and ELS ring attention events are handled
+ * by the worker thread. The interrupt handler signals the worker thread
+ * and returns for these events. This function is called without any lock
+ * held. It gets the hbalock to access and update SLI data structures.
+ *
+ * This function returns IRQ_HANDLED when interrupt is handled else it
+ * returns IRQ_NONE.
+ **/
+irqreturn_t
+lpfc_sli4_sp_intr_handler(int irq, void *dev_id)
+{
+ struct lpfc_hba *phba;
+ struct lpfc_queue *speq;
+ struct lpfc_eqe *eqe;
+ unsigned long iflag;
+ int ecount = 0;
+
+ /*
+ * Get the driver's phba structure from the dev_id
+ */
+ phba = (struct lpfc_hba *)dev_id;
+
+ if (unlikely(!phba))
+ return IRQ_NONE;
+
+ /* Get to the EQ struct associated with this vector */
+ speq = phba->sli4_hba.sp_eq;
+
+ /* Check device state for handling interrupt */
+ if (unlikely(lpfc_intr_state_check(phba))) {
+ /* Check again for link_state with lock held */
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ if (phba->link_state < LPFC_LINK_DOWN)
+ /* Flush, clear interrupt, and rearm the EQ */
+ lpfc_sli4_eq_flush(phba, speq);
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ return IRQ_NONE;
+ }
+
+ /*
+ * Process all the event on FCP slow-path EQ
+ */
+ while ((eqe = lpfc_sli4_eq_get(speq))) {
+ lpfc_sli4_sp_handle_eqe(phba, eqe);
+ if (!(++ecount % LPFC_GET_QE_REL_INT))
+ lpfc_sli4_eq_release(speq, LPFC_QUEUE_NOARM);
+ }
+
+ /* Always clear and re-arm the slow-path EQ */
+ lpfc_sli4_eq_release(speq, LPFC_QUEUE_REARM);
+
+ /* Catch the no cq entry condition */
+ if (unlikely(ecount == 0)) {
+ if (phba->intr_type == MSIX)
+ /* MSI-X treated interrupt served as no EQ share INT */
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "0357 MSI-X interrupt with no EQE\n");
+ else
+ /* Non MSI-X treated on interrupt as EQ share INT */
+ return IRQ_NONE;
+ }
+
+ return IRQ_HANDLED;
+} /* lpfc_sli4_sp_intr_handler */
+
+/**
+ * lpfc_sli4_fp_intr_handler - Fast-path interrupt handler to SLI-4 device
+ * @irq: Interrupt number.
+ * @dev_id: The device context pointer.
+ *
+ * This function is directly called from the PCI layer as an interrupt
+ * service routine when device with SLI-4 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there is a fast-path FCP IOCB
+ * ring event in the HBA. However, when the device is enabled with either
+ * MSI or Pin-IRQ interrupt mode, this function is called as part of the
+ * device-level interrupt handler. When the PCI slot is in error recovery
+ * or the HBA is undergoing initialization, the interrupt handler will not
+ * process the interrupt. The SCSI FCP fast-path ring event are handled in
+ * the intrrupt context. This function is called without any lock held.
+ * It gets the hbalock to access and update SLI data structures. Note that,
+ * the FCP EQ to FCP CQ are one-to-one map such that the FCP EQ index is
+ * equal to that of FCP CQ index.
+ *
+ * This function returns IRQ_HANDLED when interrupt is handled else it
+ * returns IRQ_NONE.
+ **/
+irqreturn_t
+lpfc_sli4_fp_intr_handler(int irq, void *dev_id)
+{
+ struct lpfc_hba *phba;
+ struct lpfc_fcp_eq_hdl *fcp_eq_hdl;
+ struct lpfc_queue *fpeq;
+ struct lpfc_eqe *eqe;
+ unsigned long iflag;
+ int ecount = 0;
+ uint32_t fcp_eqidx;
+
+ /* Get the driver's phba structure from the dev_id */
+ fcp_eq_hdl = (struct lpfc_fcp_eq_hdl *)dev_id;
+ phba = fcp_eq_hdl->phba;
+ fcp_eqidx = fcp_eq_hdl->idx;
+
+ if (unlikely(!phba))
+ return IRQ_NONE;
+
+ /* Get to the EQ struct associated with this vector */
+ fpeq = phba->sli4_hba.fp_eq[fcp_eqidx];
+
+ /* Check device state for handling interrupt */
+ if (unlikely(lpfc_intr_state_check(phba))) {
+ /* Check again for link_state with lock held */
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ if (phba->link_state < LPFC_LINK_DOWN)
+ /* Flush, clear interrupt, and rearm the EQ */
+ lpfc_sli4_eq_flush(phba, fpeq);
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ return IRQ_NONE;
+ }
+
+ /*
+ * Process all the event on FCP fast-path EQ
+ */
+ while ((eqe = lpfc_sli4_eq_get(fpeq))) {
+ lpfc_sli4_fp_handle_eqe(phba, eqe, fcp_eqidx);
+ if (!(++ecount % LPFC_GET_QE_REL_INT))
+ lpfc_sli4_eq_release(fpeq, LPFC_QUEUE_NOARM);
+ }
+
+ /* Always clear and re-arm the fast-path EQ */
+ lpfc_sli4_eq_release(fpeq, LPFC_QUEUE_REARM);
+
+ if (unlikely(ecount == 0)) {
+ if (phba->intr_type == MSIX)
+ /* MSI-X treated interrupt served as no EQ share INT */
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "0358 MSI-X interrupt with no EQE\n");
+ else
+ /* Non MSI-X treated on interrupt as EQ share INT */
+ return IRQ_NONE;
+ }
+
+ return IRQ_HANDLED;
+} /* lpfc_sli4_fp_intr_handler */
+
+/**
+ * lpfc_sli4_intr_handler - Device-level interrupt handler for SLI-4 device
+ * @irq: Interrupt number.
+ * @dev_id: The device context pointer.
+ *
+ * This function is the device-level interrupt handler to device with SLI-4
+ * interface spec, called from the PCI layer when either MSI or Pin-IRQ
+ * interrupt mode is enabled and there is an event in the HBA which requires
+ * driver attention. This function invokes the slow-path interrupt attention
+ * handling function and fast-path interrupt attention handling function in
+ * turn to process the relevant HBA attention events. This function is called
+ * without any lock held. It gets the hbalock to access and update SLI data
+ * structures.
+ *
+ * This function returns IRQ_HANDLED when interrupt is handled, else it
+ * returns IRQ_NONE.
+ **/
+irqreturn_t
+lpfc_sli4_intr_handler(int irq, void *dev_id)
+{
+ struct lpfc_hba *phba;
+ irqreturn_t sp_irq_rc, fp_irq_rc;
+ bool fp_handled = false;
+ uint32_t fcp_eqidx;
+
+ /* Get the driver's phba structure from the dev_id */
+ phba = (struct lpfc_hba *)dev_id;
+
+ if (unlikely(!phba))
+ return IRQ_NONE;
+
+ /*
+ * Invokes slow-path host attention interrupt handling as appropriate.
+ */
+ sp_irq_rc = lpfc_sli4_sp_intr_handler(irq, dev_id);
+
+ /*
+ * Invoke fast-path host attention interrupt handling as appropriate.
+ */
+ for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
+ fp_irq_rc = lpfc_sli4_fp_intr_handler(irq,
+ &phba->sli4_hba.fcp_eq_hdl[fcp_eqidx]);
+ if (fp_irq_rc == IRQ_HANDLED)
+ fp_handled |= true;
+ }
+
+ return (fp_handled == true) ? IRQ_HANDLED : sp_irq_rc;
+} /* lpfc_sli4_intr_handler */
+
+/**
+ * lpfc_sli4_queue_free - free a queue structure and associated memory
+ * @queue: The queue structure to free.
+ *
+ * This function frees a queue structure and the DMAable memeory used for
+ * the host resident queue. This function must be called after destroying the
+ * queue on the HBA.
+ **/
+void
+lpfc_sli4_queue_free(struct lpfc_queue *queue)
+{
+ struct lpfc_dmabuf *dmabuf;
+
+ if (!queue)
+ return;
+
+ while (!list_empty(&queue->page_list)) {
+ list_remove_head(&queue->page_list, dmabuf, struct lpfc_dmabuf,
+ list);
+ dma_free_coherent(&queue->phba->pcidev->dev, PAGE_SIZE,
+ dmabuf->virt, dmabuf->phys);
+ kfree(dmabuf);
+ }
+ kfree(queue);
+ return;
+}
+
+/**
+ * lpfc_sli4_queue_alloc - Allocate and initialize a queue structure
+ * @phba: The HBA that this queue is being created on.
+ * @entry_size: The size of each queue entry for this queue.
+ * @entry count: The number of entries that this queue will handle.
+ *
+ * This function allocates a queue structure and the DMAable memory used for
+ * the host resident queue. This function must be called before creating the
+ * queue on the HBA.
+ **/
+struct lpfc_queue *
+lpfc_sli4_queue_alloc(struct lpfc_hba *phba, uint32_t entry_size,
+ uint32_t entry_count)
+{
+ struct lpfc_queue *queue;
+ struct lpfc_dmabuf *dmabuf;
+ int x, total_qe_count;
+ void *dma_pointer;
+
+
+ queue = kzalloc(sizeof(struct lpfc_queue) +
+ (sizeof(union sli4_qe) * entry_count), GFP_KERNEL);
+ if (!queue)
+ return NULL;
+ queue->page_count = (PAGE_ALIGN(entry_size * entry_count))/PAGE_SIZE;
+ INIT_LIST_HEAD(&queue->list);
+ INIT_LIST_HEAD(&queue->page_list);
+ INIT_LIST_HEAD(&queue->child_list);
+ for (x = 0, total_qe_count = 0; x < queue->page_count; x++) {
+ dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (!dmabuf)
+ goto out_fail;
+ dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+ PAGE_SIZE, &dmabuf->phys,
+ GFP_KERNEL);
+ if (!dmabuf->virt) {
+ kfree(dmabuf);
+ goto out_fail;
+ }
+ dmabuf->buffer_tag = x;
+ list_add_tail(&dmabuf->list, &queue->page_list);
+ /* initialize queue's entry array */
+ dma_pointer = dmabuf->virt;
+ for (; total_qe_count < entry_count &&
+ dma_pointer < (PAGE_SIZE + dmabuf->virt);
+ total_qe_count++, dma_pointer += entry_size) {
+ queue->qe[total_qe_count].address = dma_pointer;
+ }
+ }
+ queue->entry_size = entry_size;
+ queue->entry_count = entry_count;
+ queue->phba = phba;
+
+ return queue;
+out_fail:
+ lpfc_sli4_queue_free(queue);
+ return NULL;
+}
+
+/**
+ * lpfc_eq_create - Create an Event Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @eq: The queue structure to use to create the event queue.
+ * @imax: The maximum interrupt per second limit.
+ *
+ * This function creates an event queue, as detailed in @eq, on a port,
+ * described by @phba by sending an EQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @eq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. This
+ * function will send the EQ_CREATE mailbox command to the HBA to setup the
+ * event queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_eq_create(struct lpfc_hba *phba, struct lpfc_queue *eq, uint16_t imax)
+{
+ struct lpfc_mbx_eq_create *eq_create;
+ LPFC_MBOXQ_t *mbox;
+ int rc, length, status = 0;
+ struct lpfc_dmabuf *dmabuf;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+ uint16_t dmult;
+
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+ length = (sizeof(struct lpfc_mbx_eq_create) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_EQ_CREATE,
+ length, LPFC_SLI4_MBX_EMBED);
+ eq_create = &mbox->u.mqe.un.eq_create;
+ bf_set(lpfc_mbx_eq_create_num_pages, &eq_create->u.request,
+ eq->page_count);
+ bf_set(lpfc_eq_context_size, &eq_create->u.request.context,
+ LPFC_EQE_SIZE);
+ bf_set(lpfc_eq_context_valid, &eq_create->u.request.context, 1);
+ /* Calculate delay multiper from maximum interrupt per second */
+ dmult = LPFC_DMULT_CONST/imax - 1;
+ bf_set(lpfc_eq_context_delay_multi, &eq_create->u.request.context,
+ dmult);
+ switch (eq->entry_count) {
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0360 Unsupported EQ count. (%d)\n",
+ eq->entry_count);
+ if (eq->entry_count < 256)
+ return -EINVAL;
+ /* otherwise default to smallest count (drop through) */
+ case 256:
+ bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+ LPFC_EQ_CNT_256);
+ break;
+ case 512:
+ bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+ LPFC_EQ_CNT_512);
+ break;
+ case 1024:
+ bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+ LPFC_EQ_CNT_1024);
+ break;
+ case 2048:
+ bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+ LPFC_EQ_CNT_2048);
+ break;
+ case 4096:
+ bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+ LPFC_EQ_CNT_4096);
+ break;
+ }
+ list_for_each_entry(dmabuf, &eq->page_list, list) {
+ eq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+ putPaddrLow(dmabuf->phys);
+ eq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+ putPaddrHigh(dmabuf->phys);
+ }
+ mbox->vport = phba->pport;
+ mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ mbox->context1 = NULL;
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ shdr = (union lpfc_sli4_cfg_shdr *) &eq_create->header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2500 EQ_CREATE mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ status = -ENXIO;
+ }
+ eq->type = LPFC_EQ;
+ eq->subtype = LPFC_NONE;
+ eq->queue_id = bf_get(lpfc_mbx_eq_create_q_id, &eq_create->u.response);
+ if (eq->queue_id == 0xFFFF)
+ status = -ENXIO;
+ eq->host_index = 0;
+ eq->hba_index = 0;
+
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return status;
+}
+
+/**
+ * lpfc_cq_create - Create a Completion Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @cq: The queue structure to use to create the completion queue.
+ * @eq: The event queue to bind this completion queue to.
+ *
+ * This function creates a completion queue, as detailed in @wq, on a port,
+ * described by @phba by sending a CQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @cq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. The @eq
+ * is used to indicate which event queue to bind this completion queue to. This
+ * function will send the CQ_CREATE mailbox command to the HBA to setup the
+ * completion queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_cq_create(struct lpfc_hba *phba, struct lpfc_queue *cq,
+ struct lpfc_queue *eq, uint32_t type, uint32_t subtype)
+{
+ struct lpfc_mbx_cq_create *cq_create;
+ struct lpfc_dmabuf *dmabuf;
+ LPFC_MBOXQ_t *mbox;
+ int rc, length, status = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+ length = (sizeof(struct lpfc_mbx_cq_create) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_CQ_CREATE,
+ length, LPFC_SLI4_MBX_EMBED);
+ cq_create = &mbox->u.mqe.un.cq_create;
+ bf_set(lpfc_mbx_cq_create_num_pages, &cq_create->u.request,
+ cq->page_count);
+ bf_set(lpfc_cq_context_event, &cq_create->u.request.context, 1);
+ bf_set(lpfc_cq_context_valid, &cq_create->u.request.context, 1);
+ bf_set(lpfc_cq_eq_id, &cq_create->u.request.context, eq->queue_id);
+ switch (cq->entry_count) {
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0361 Unsupported CQ count. (%d)\n",
+ cq->entry_count);
+ if (cq->entry_count < 256)
+ return -EINVAL;
+ /* otherwise default to smallest count (drop through) */
+ case 256:
+ bf_set(lpfc_cq_context_count, &cq_create->u.request.context,
+ LPFC_CQ_CNT_256);
+ break;
+ case 512:
+ bf_set(lpfc_cq_context_count, &cq_create->u.request.context,
+ LPFC_CQ_CNT_512);
+ break;
+ case 1024:
+ bf_set(lpfc_cq_context_count, &cq_create->u.request.context,
+ LPFC_CQ_CNT_1024);
+ break;
+ }
+ list_for_each_entry(dmabuf, &cq->page_list, list) {
+ cq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+ putPaddrLow(dmabuf->phys);
+ cq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+ putPaddrHigh(dmabuf->phys);
+ }
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *) &cq_create->header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2501 CQ_CREATE mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ status = -ENXIO;
+ goto out;
+ }
+ cq->queue_id = bf_get(lpfc_mbx_cq_create_q_id, &cq_create->u.response);
+ if (cq->queue_id == 0xFFFF) {
+ status = -ENXIO;
+ goto out;
+ }
+ /* link the cq onto the parent eq child list */
+ list_add_tail(&cq->list, &eq->child_list);
+ /* Set up completion queue's type and subtype */
+ cq->type = type;
+ cq->subtype = subtype;
+ cq->queue_id = bf_get(lpfc_mbx_cq_create_q_id, &cq_create->u.response);
+ cq->host_index = 0;
+ cq->hba_index = 0;
+out:
+
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return status;
+}
+
+/**
+ * lpfc_mq_create - Create a mailbox Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @mq: The queue structure to use to create the mailbox queue.
+ *
+ * This function creates a mailbox queue, as detailed in @mq, on a port,
+ * described by @phba by sending a MQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @cq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. This
+ * function will send the MQ_CREATE mailbox command to the HBA to setup the
+ * mailbox queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq,
+ struct lpfc_queue *cq, uint32_t subtype)
+{
+ struct lpfc_mbx_mq_create *mq_create;
+ struct lpfc_dmabuf *dmabuf;
+ LPFC_MBOXQ_t *mbox;
+ int rc, length, status = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+ length = (sizeof(struct lpfc_mbx_mq_create) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_MQ_CREATE,
+ length, LPFC_SLI4_MBX_EMBED);
+ mq_create = &mbox->u.mqe.un.mq_create;
+ bf_set(lpfc_mbx_mq_create_num_pages, &mq_create->u.request,
+ mq->page_count);
+ bf_set(lpfc_mq_context_cq_id, &mq_create->u.request.context,
+ cq->queue_id);
+ bf_set(lpfc_mq_context_valid, &mq_create->u.request.context, 1);
+ switch (mq->entry_count) {
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0362 Unsupported MQ count. (%d)\n",
+ mq->entry_count);
+ if (mq->entry_count < 16)
+ return -EINVAL;
+ /* otherwise default to smallest count (drop through) */
+ case 16:
+ bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+ LPFC_MQ_CNT_16);
+ break;
+ case 32:
+ bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+ LPFC_MQ_CNT_32);
+ break;
+ case 64:
+ bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+ LPFC_MQ_CNT_64);
+ break;
+ case 128:
+ bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+ LPFC_MQ_CNT_128);
+ break;
+ }
+ list_for_each_entry(dmabuf, &mq->page_list, list) {
+ mq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+ putPaddrLow(dmabuf->phys);
+ mq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+ putPaddrHigh(dmabuf->phys);
+ }
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *) &mq_create->header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2502 MQ_CREATE mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ status = -ENXIO;
+ goto out;
+ }
+ mq->queue_id = bf_get(lpfc_mbx_mq_create_q_id, &mq_create->u.response);
+ if (mq->queue_id == 0xFFFF) {
+ status = -ENXIO;
+ goto out;
+ }
+ mq->type = LPFC_MQ;
+ mq->subtype = subtype;
+ mq->host_index = 0;
+ mq->hba_index = 0;
+
+ /* link the mq onto the parent cq child list */
+ list_add_tail(&mq->list, &cq->child_list);
+out:
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return status;
+}
+
+/**
+ * lpfc_wq_create - Create a Work Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @wq: The queue structure to use to create the work queue.
+ * @cq: The completion queue to bind this work queue to.
+ * @subtype: The subtype of the work queue indicating its functionality.
+ *
+ * This function creates a work queue, as detailed in @wq, on a port, described
+ * by @phba by sending a WQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @wq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. The @cq
+ * is used to indicate which completion queue to bind this work queue to. This
+ * function will send the WQ_CREATE mailbox command to the HBA to setup the
+ * work queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
+ struct lpfc_queue *cq, uint32_t subtype)
+{
+ struct lpfc_mbx_wq_create *wq_create;
+ struct lpfc_dmabuf *dmabuf;
+ LPFC_MBOXQ_t *mbox;
+ int rc, length, status = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+ length = (sizeof(struct lpfc_mbx_wq_create) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_WQ_CREATE,
+ length, LPFC_SLI4_MBX_EMBED);
+ wq_create = &mbox->u.mqe.un.wq_create;
+ bf_set(lpfc_mbx_wq_create_num_pages, &wq_create->u.request,
+ wq->page_count);
+ bf_set(lpfc_mbx_wq_create_cq_id, &wq_create->u.request,
+ cq->queue_id);
+ list_for_each_entry(dmabuf, &wq->page_list, list) {
+ wq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+ putPaddrLow(dmabuf->phys);
+ wq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+ putPaddrHigh(dmabuf->phys);
+ }
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *) &wq_create->header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2503 WQ_CREATE mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ status = -ENXIO;
+ goto out;
+ }
+ wq->queue_id = bf_get(lpfc_mbx_wq_create_q_id, &wq_create->u.response);
+ if (wq->queue_id == 0xFFFF) {
+ status = -ENXIO;
+ goto out;
+ }
+ wq->type = LPFC_WQ;
+ wq->subtype = subtype;
+ wq->host_index = 0;
+ wq->hba_index = 0;
+
+ /* link the wq onto the parent cq child list */
+ list_add_tail(&wq->list, &cq->child_list);
+out:
+ if (rc == MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return status;
+}
+
+/**
+ * lpfc_rq_create - Create a Receive Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @hrq: The queue structure to use to create the header receive queue.
+ * @drq: The queue structure to use to create the data receive queue.
+ * @cq: The completion queue to bind this work queue to.
+ *
+ * This function creates a receive buffer queue pair , as detailed in @hrq and
+ * @drq, on a port, described by @phba by sending a RQ_CREATE mailbox command
+ * to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @drq and @hrq
+ * struct is used to get the entry count that is necessary to determine the
+ * number of pages to use for this queue. The @cq is used to indicate which
+ * completion queue to bind received buffers that are posted to these queues to.
+ * This function will send the RQ_CREATE mailbox command to the HBA to setup the
+ * receive queue pair. This function is asynchronous and will wait for the
+ * mailbox command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq,
+ struct lpfc_queue *drq, struct lpfc_queue *cq, uint32_t subtype)
+{
+ struct lpfc_mbx_rq_create *rq_create;
+ struct lpfc_dmabuf *dmabuf;
+ LPFC_MBOXQ_t *mbox;
+ int rc, length, status = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ if (hrq->entry_count != drq->entry_count)
+ return -EINVAL;
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+ length = (sizeof(struct lpfc_mbx_rq_create) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_RQ_CREATE,
+ length, LPFC_SLI4_MBX_EMBED);
+ rq_create = &mbox->u.mqe.un.rq_create;
+ switch (hrq->entry_count) {
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2535 Unsupported RQ count. (%d)\n",
+ hrq->entry_count);
+ if (hrq->entry_count < 512)
+ return -EINVAL;
+ /* otherwise default to smallest count (drop through) */
+ case 512:
+ bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+ LPFC_RQ_RING_SIZE_512);
+ break;
+ case 1024:
+ bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+ LPFC_RQ_RING_SIZE_1024);
+ break;
+ case 2048:
+ bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+ LPFC_RQ_RING_SIZE_2048);
+ break;
+ case 4096:
+ bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+ LPFC_RQ_RING_SIZE_4096);
+ break;
+ }
+ bf_set(lpfc_rq_context_cq_id, &rq_create->u.request.context,
+ cq->queue_id);
+ bf_set(lpfc_mbx_rq_create_num_pages, &rq_create->u.request,
+ hrq->page_count);
+ bf_set(lpfc_rq_context_buf_size, &rq_create->u.request.context,
+ LPFC_HDR_BUF_SIZE);
+ list_for_each_entry(dmabuf, &hrq->page_list, list) {
+ rq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+ putPaddrLow(dmabuf->phys);
+ rq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+ putPaddrHigh(dmabuf->phys);
+ }
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *) &rq_create->header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2504 RQ_CREATE mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ status = -ENXIO;
+ goto out;
+ }
+ hrq->queue_id = bf_get(lpfc_mbx_rq_create_q_id, &rq_create->u.response);
+ if (hrq->queue_id == 0xFFFF) {
+ status = -ENXIO;
+ goto out;
+ }
+ hrq->type = LPFC_HRQ;
+ hrq->subtype = subtype;
+ hrq->host_index = 0;
+ hrq->hba_index = 0;
+
+ /* now create the data queue */
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_RQ_CREATE,
+ length, LPFC_SLI4_MBX_EMBED);
+ switch (drq->entry_count) {
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2536 Unsupported RQ count. (%d)\n",
+ drq->entry_count);
+ if (drq->entry_count < 512)
+ return -EINVAL;
+ /* otherwise default to smallest count (drop through) */
+ case 512:
+ bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+ LPFC_RQ_RING_SIZE_512);
+ break;
+ case 1024:
+ bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+ LPFC_RQ_RING_SIZE_1024);
+ break;
+ case 2048:
+ bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+ LPFC_RQ_RING_SIZE_2048);
+ break;
+ case 4096:
+ bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+ LPFC_RQ_RING_SIZE_4096);
+ break;
+ }
+ bf_set(lpfc_rq_context_cq_id, &rq_create->u.request.context,
+ cq->queue_id);
+ bf_set(lpfc_mbx_rq_create_num_pages, &rq_create->u.request,
+ drq->page_count);
+ bf_set(lpfc_rq_context_buf_size, &rq_create->u.request.context,
+ LPFC_DATA_BUF_SIZE);
+ list_for_each_entry(dmabuf, &drq->page_list, list) {
+ rq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+ putPaddrLow(dmabuf->phys);
+ rq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+ putPaddrHigh(dmabuf->phys);
+ }
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *) &rq_create->header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ status = -ENXIO;
+ goto out;
+ }
+ drq->queue_id = bf_get(lpfc_mbx_rq_create_q_id, &rq_create->u.response);
+ if (drq->queue_id == 0xFFFF) {
+ status = -ENXIO;
+ goto out;
+ }
+ drq->type = LPFC_DRQ;
+ drq->subtype = subtype;
+ drq->host_index = 0;
+ drq->hba_index = 0;
+
+ /* link the header and data RQs onto the parent cq child list */
+ list_add_tail(&hrq->list, &cq->child_list);
+ list_add_tail(&drq->list, &cq->child_list);
+
+out:
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return status;
+}
+
+/**
+ * lpfc_eq_destroy - Destroy an event Queue on the HBA
+ * @eq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @eq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @eq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_eq_destroy(struct lpfc_hba *phba, struct lpfc_queue *eq)
+{
+ LPFC_MBOXQ_t *mbox;
+ int rc, length, status = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ if (!eq)
+ return -ENODEV;
+ mbox = mempool_alloc(eq->phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+ length = (sizeof(struct lpfc_mbx_eq_destroy) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_EQ_DESTROY,
+ length, LPFC_SLI4_MBX_EMBED);
+ bf_set(lpfc_mbx_eq_destroy_q_id, &mbox->u.mqe.un.eq_destroy.u.request,
+ eq->queue_id);
+ mbox->vport = eq->phba->pport;
+ mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+
+ rc = lpfc_sli_issue_mbox(eq->phba, mbox, MBX_POLL);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &mbox->u.mqe.un.eq_destroy.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2505 EQ_DESTROY mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ status = -ENXIO;
+ }
+
+ /* Remove eq from any list */
+ list_del_init(&eq->list);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, eq->phba->mbox_mem_pool);
+ return status;
+}
+
+/**
+ * lpfc_cq_destroy - Destroy a Completion Queue on the HBA
+ * @cq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @cq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @cq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_cq_destroy(struct lpfc_hba *phba, struct lpfc_queue *cq)
+{
+ LPFC_MBOXQ_t *mbox;
+ int rc, length, status = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ if (!cq)
+ return -ENODEV;
+ mbox = mempool_alloc(cq->phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+ length = (sizeof(struct lpfc_mbx_cq_destroy) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_CQ_DESTROY,
+ length, LPFC_SLI4_MBX_EMBED);
+ bf_set(lpfc_mbx_cq_destroy_q_id, &mbox->u.mqe.un.cq_destroy.u.request,
+ cq->queue_id);
+ mbox->vport = cq->phba->pport;
+ mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ rc = lpfc_sli_issue_mbox(cq->phba, mbox, MBX_POLL);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &mbox->u.mqe.un.wq_create.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2506 CQ_DESTROY mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ status = -ENXIO;
+ }
+ /* Remove cq from any list */
+ list_del_init(&cq->list);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, cq->phba->mbox_mem_pool);
+ return status;
+}
+
+/**
+ * lpfc_mq_destroy - Destroy a Mailbox Queue on the HBA
+ * @qm: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @mq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @mq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_mq_destroy(struct lpfc_hba *phba, struct lpfc_queue *mq)
+{
+ LPFC_MBOXQ_t *mbox;
+ int rc, length, status = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ if (!mq)
+ return -ENODEV;
+ mbox = mempool_alloc(mq->phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+ length = (sizeof(struct lpfc_mbx_mq_destroy) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_MQ_DESTROY,
+ length, LPFC_SLI4_MBX_EMBED);
+ bf_set(lpfc_mbx_mq_destroy_q_id, &mbox->u.mqe.un.mq_destroy.u.request,
+ mq->queue_id);
+ mbox->vport = mq->phba->pport;
+ mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ rc = lpfc_sli_issue_mbox(mq->phba, mbox, MBX_POLL);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &mbox->u.mqe.un.mq_destroy.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2507 MQ_DESTROY mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ status = -ENXIO;
+ }
+ /* Remove mq from any list */
+ list_del_init(&mq->list);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, mq->phba->mbox_mem_pool);
+ return status;
+}
+
+/**
+ * lpfc_wq_destroy - Destroy a Work Queue on the HBA
+ * @wq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @wq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @wq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_wq_destroy(struct lpfc_hba *phba, struct lpfc_queue *wq)
+{
+ LPFC_MBOXQ_t *mbox;
+ int rc, length, status = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ if (!wq)
+ return -ENODEV;
+ mbox = mempool_alloc(wq->phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+ length = (sizeof(struct lpfc_mbx_wq_destroy) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_WQ_DESTROY,
+ length, LPFC_SLI4_MBX_EMBED);
+ bf_set(lpfc_mbx_wq_destroy_q_id, &mbox->u.mqe.un.wq_destroy.u.request,
+ wq->queue_id);
+ mbox->vport = wq->phba->pport;
+ mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ rc = lpfc_sli_issue_mbox(wq->phba, mbox, MBX_POLL);
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &mbox->u.mqe.un.wq_destroy.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2508 WQ_DESTROY mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ status = -ENXIO;
+ }
+ /* Remove wq from any list */
+ list_del_init(&wq->list);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, wq->phba->mbox_mem_pool);
+ return status;
+}
+
+/**
+ * lpfc_rq_destroy - Destroy a Receive Queue on the HBA
+ * @rq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @rq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @rq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_rq_destroy(struct lpfc_hba *phba, struct lpfc_queue *hrq,
+ struct lpfc_queue *drq)
+{
+ LPFC_MBOXQ_t *mbox;
+ int rc, length, status = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ if (!hrq || !drq)
+ return -ENODEV;
+ mbox = mempool_alloc(hrq->phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+ length = (sizeof(struct lpfc_mbx_rq_destroy) -
+ sizeof(struct mbox_header));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_RQ_DESTROY,
+ length, LPFC_SLI4_MBX_EMBED);
+ bf_set(lpfc_mbx_rq_destroy_q_id, &mbox->u.mqe.un.rq_destroy.u.request,
+ hrq->queue_id);
+ mbox->vport = hrq->phba->pport;
+ mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ rc = lpfc_sli_issue_mbox(hrq->phba, mbox, MBX_POLL);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &mbox->u.mqe.un.rq_destroy.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2509 RQ_DESTROY mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, hrq->phba->mbox_mem_pool);
+ return -ENXIO;
+ }
+ bf_set(lpfc_mbx_rq_destroy_q_id, &mbox->u.mqe.un.rq_destroy.u.request,
+ drq->queue_id);
+ rc = lpfc_sli_issue_mbox(drq->phba, mbox, MBX_POLL);
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &mbox->u.mqe.un.rq_destroy.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2510 RQ_DESTROY mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ status = -ENXIO;
+ }
+ list_del_init(&hrq->list);
+ list_del_init(&drq->list);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, hrq->phba->mbox_mem_pool);
+ return status;
+}
+
+/**
+ * lpfc_sli4_post_sgl - Post scatter gather list for an XRI to HBA
+ * @phba: The virtual port for which this call being executed.
+ * @pdma_phys_addr0: Physical address of the 1st SGL page.
+ * @pdma_phys_addr1: Physical address of the 2nd SGL page.
+ * @xritag: the xritag that ties this io to the SGL pages.
+ *
+ * This routine will post the sgl pages for the IO that has the xritag
+ * that is in the iocbq structure. The xritag is assigned during iocbq
+ * creation and persists for as long as the driver is loaded.
+ * if the caller has fewer than 256 scatter gather segments to map then
+ * pdma_phys_addr1 should be 0.
+ * If the caller needs to map more than 256 scatter gather segment then
+ * pdma_phys_addr1 should be a valid physical address.
+ * physical address for SGLs must be 64 byte aligned.
+ * If you are going to map 2 SGL's then the first one must have 256 entries
+ * the second sgl can have between 1 and 256 entries.
+ *
+ * Return codes:
+ * 0 - Success
+ * -ENXIO, -ENOMEM - Failure
+ **/
+int
+lpfc_sli4_post_sgl(struct lpfc_hba *phba,
+ dma_addr_t pdma_phys_addr0,
+ dma_addr_t pdma_phys_addr1,
+ uint16_t xritag)
+{
+ struct lpfc_mbx_post_sgl_pages *post_sgl_pages;
+ LPFC_MBOXQ_t *mbox;
+ int rc;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ if (xritag == NO_XRI) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0364 Invalid param:\n");
+ return -EINVAL;
+ }
+
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES,
+ sizeof(struct lpfc_mbx_post_sgl_pages) -
+ sizeof(struct mbox_header), LPFC_SLI4_MBX_EMBED);
+
+ post_sgl_pages = (struct lpfc_mbx_post_sgl_pages *)
+ &mbox->u.mqe.un.post_sgl_pages;
+ bf_set(lpfc_post_sgl_pages_xri, post_sgl_pages, xritag);
+ bf_set(lpfc_post_sgl_pages_xricnt, post_sgl_pages, 1);
+
+ post_sgl_pages->sgl_pg_pairs[0].sgl_pg0_addr_lo =
+ cpu_to_le32(putPaddrLow(pdma_phys_addr0));
+ post_sgl_pages->sgl_pg_pairs[0].sgl_pg0_addr_hi =
+ cpu_to_le32(putPaddrHigh(pdma_phys_addr0));
+
+ post_sgl_pages->sgl_pg_pairs[0].sgl_pg1_addr_lo =
+ cpu_to_le32(putPaddrLow(pdma_phys_addr1));
+ post_sgl_pages->sgl_pg_pairs[0].sgl_pg1_addr_hi =
+ cpu_to_le32(putPaddrHigh(pdma_phys_addr1));
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ else
+ rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *) &post_sgl_pages->header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2511 POST_SGL mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ rc = -ENXIO;
+ }
+ return 0;
+}
+/**
+ * lpfc_sli4_remove_all_sgl_pages - Post scatter gather list for an XRI to HBA
+ * @phba: The virtual port for which this call being executed.
+ *
+ * This routine will remove all of the sgl pages registered with the hba.
+ *
+ * Return codes:
+ * 0 - Success
+ * -ENXIO, -ENOMEM - Failure
+ **/
+int
+lpfc_sli4_remove_all_sgl_pages(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *mbox;
+ int rc;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_REMOVE_SGL_PAGES, 0,
+ LPFC_SLI4_MBX_EMBED);
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ else
+ rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &mbox->u.mqe.un.sli4_config.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2512 REMOVE_ALL_SGL_PAGES mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ rc = -ENXIO;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_sli4_next_xritag - Get an xritag for the io
+ * @phba: Pointer to HBA context object.
+ *
+ * This function gets an xritag for the iocb. If there is no unused xritag
+ * it will return 0xffff.
+ * The function returns the allocated xritag if successful, else returns zero.
+ * Zero is not a valid xritag.
+ * The caller is not required to hold any lock.
+ **/
+uint16_t
+lpfc_sli4_next_xritag(struct lpfc_hba *phba)
+{
+ uint16_t xritag;
+
+ spin_lock_irq(&phba->hbalock);
+ xritag = phba->sli4_hba.next_xri;
+ if ((xritag != (uint16_t) -1) && xritag <
+ (phba->sli4_hba.max_cfg_param.max_xri
+ + phba->sli4_hba.max_cfg_param.xri_base)) {
+ phba->sli4_hba.next_xri++;
+ phba->sli4_hba.max_cfg_param.xri_used++;
+ spin_unlock_irq(&phba->hbalock);
+ return xritag;
+ }
+ spin_unlock_irq(&phba->hbalock);
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2004 Failed to allocate XRI.last XRITAG is %d"
+ " Max XRI is %d, Used XRI is %d\n",
+ phba->sli4_hba.next_xri,
+ phba->sli4_hba.max_cfg_param.max_xri,
+ phba->sli4_hba.max_cfg_param.xri_used);
+ return -1;
+}
+
+/**
+ * lpfc_sli4_post_sgl_list - post a block of sgl list to the firmware.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post a block of driver's sgl pages to the
+ * HBA using non-embedded mailbox command. No Lock is held. This routine
+ * is only called when the driver is loading and after all IO has been
+ * stopped.
+ **/
+int
+lpfc_sli4_post_sgl_list(struct lpfc_hba *phba)
+{
+ struct lpfc_sglq *sglq_entry;
+ struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
+ struct sgl_page_pairs *sgl_pg_pairs;
+ void *viraddr;
+ LPFC_MBOXQ_t *mbox;
+ uint32_t reqlen, alloclen, pg_pairs;
+ uint32_t mbox_tmo;
+ uint16_t xritag_start = 0;
+ int els_xri_cnt, rc = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ /* The number of sgls to be posted */
+ els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
+
+ reqlen = els_xri_cnt * sizeof(struct sgl_page_pairs) +
+ sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
+ if (reqlen > PAGE_SIZE) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2559 Block sgl registration required DMA "
+ "size (%d) great than a page\n", reqlen);
+ return -ENOMEM;
+ }
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2560 Failed to allocate mbox cmd memory\n");
+ return -ENOMEM;
+ }
+
+ /* Allocate DMA memory and set up the non-embedded mailbox command */
+ alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES, reqlen,
+ LPFC_SLI4_MBX_NEMBED);
+
+ if (alloclen < reqlen) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0285 Allocated DMA memory size (%d) is "
+ "less than the requested DMA memory "
+ "size (%d)\n", alloclen, reqlen);
+ lpfc_sli4_mbox_cmd_free(phba, mbox);
+ return -ENOMEM;
+ }
+
+ /* Get the first SGE entry from the non-embedded DMA memory */
+ if (unlikely(!mbox->sge_array)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+ "2525 Failed to get the non-embedded SGE "
+ "virtual address\n");
+ lpfc_sli4_mbox_cmd_free(phba, mbox);
+ return -ENOMEM;
+ }
+ viraddr = mbox->sge_array->addr[0];
+
+ /* Set up the SGL pages in the non-embedded DMA pages */
+ sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
+ sgl_pg_pairs = &sgl->sgl_pg_pairs;
+
+ for (pg_pairs = 0; pg_pairs < els_xri_cnt; pg_pairs++) {
+ sglq_entry = phba->sli4_hba.lpfc_els_sgl_array[pg_pairs];
+ /* Set up the sge entry */
+ sgl_pg_pairs->sgl_pg0_addr_lo =
+ cpu_to_le32(putPaddrLow(sglq_entry->phys));
+ sgl_pg_pairs->sgl_pg0_addr_hi =
+ cpu_to_le32(putPaddrHigh(sglq_entry->phys));
+ sgl_pg_pairs->sgl_pg1_addr_lo =
+ cpu_to_le32(putPaddrLow(0));
+ sgl_pg_pairs->sgl_pg1_addr_hi =
+ cpu_to_le32(putPaddrHigh(0));
+ /* Keep the first xritag on the list */
+ if (pg_pairs == 0)
+ xritag_start = sglq_entry->sli4_xritag;
+ sgl_pg_pairs++;
+ }
+ bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
+ pg_pairs = (pg_pairs > 0) ? (pg_pairs - 1) : pg_pairs;
+ bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs);
+ /* Perform endian conversion if necessary */
+ sgl->word0 = cpu_to_le32(sgl->word0);
+
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ else {
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+ }
+ shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (rc != MBX_TIMEOUT)
+ lpfc_sli4_mbox_cmd_free(phba, mbox);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2513 POST_SGL_BLOCK mailbox command failed "
+ "status x%x add_status x%x mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ rc = -ENXIO;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_sli4_post_scsi_sgl_block - post a block of scsi sgl list to firmware
+ * @phba: pointer to lpfc hba data structure.
+ * @sblist: pointer to scsi buffer list.
+ * @count: number of scsi buffers on the list.
+ *
+ * This routine is invoked to post a block of @count scsi sgl pages from a
+ * SCSI buffer list @sblist to the HBA using non-embedded mailbox command.
+ * No Lock is held.
+ *
+ **/
+int
+lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba, struct list_head *sblist,
+ int cnt)
+{
+ struct lpfc_scsi_buf *psb;
+ struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
+ struct sgl_page_pairs *sgl_pg_pairs;
+ void *viraddr;
+ LPFC_MBOXQ_t *mbox;
+ uint32_t reqlen, alloclen, pg_pairs;
+ uint32_t mbox_tmo;
+ uint16_t xritag_start = 0;
+ int rc = 0;
+ uint32_t shdr_status, shdr_add_status;
+ dma_addr_t pdma_phys_bpl1;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ /* Calculate the requested length of the dma memory */
+ reqlen = cnt * sizeof(struct sgl_page_pairs) +
+ sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
+ if (reqlen > PAGE_SIZE) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "0217 Block sgl registration required DMA "
+ "size (%d) great than a page\n", reqlen);
+ return -ENOMEM;
+ }
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0283 Failed to allocate mbox cmd memory\n");
+ return -ENOMEM;
+ }
+
+ /* Allocate DMA memory and set up the non-embedded mailbox command */
+ alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES, reqlen,
+ LPFC_SLI4_MBX_NEMBED);
+
+ if (alloclen < reqlen) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2561 Allocated DMA memory size (%d) is "
+ "less than the requested DMA memory "
+ "size (%d)\n", alloclen, reqlen);
+ lpfc_sli4_mbox_cmd_free(phba, mbox);
+ return -ENOMEM;
+ }
+
+ /* Get the first SGE entry from the non-embedded DMA memory */
+ if (unlikely(!mbox->sge_array)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+ "2565 Failed to get the non-embedded SGE "
+ "virtual address\n");
+ lpfc_sli4_mbox_cmd_free(phba, mbox);
+ return -ENOMEM;
+ }
+ viraddr = mbox->sge_array->addr[0];
+
+ /* Set up the SGL pages in the non-embedded DMA pages */
+ sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
+ sgl_pg_pairs = &sgl->sgl_pg_pairs;
+
+ pg_pairs = 0;
+ list_for_each_entry(psb, sblist, list) {
+ /* Set up the sge entry */
+ sgl_pg_pairs->sgl_pg0_addr_lo =
+ cpu_to_le32(putPaddrLow(psb->dma_phys_bpl));
+ sgl_pg_pairs->sgl_pg0_addr_hi =
+ cpu_to_le32(putPaddrHigh(psb->dma_phys_bpl));
+ if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
+ pdma_phys_bpl1 = psb->dma_phys_bpl + SGL_PAGE_SIZE;
+ else
+ pdma_phys_bpl1 = 0;
+ sgl_pg_pairs->sgl_pg1_addr_lo =
+ cpu_to_le32(putPaddrLow(pdma_phys_bpl1));
+ sgl_pg_pairs->sgl_pg1_addr_hi =
+ cpu_to_le32(putPaddrHigh(pdma_phys_bpl1));
+ /* Keep the first xritag on the list */
+ if (pg_pairs == 0)
+ xritag_start = psb->cur_iocbq.sli4_xritag;
+ sgl_pg_pairs++;
+ pg_pairs++;
+ }
+ bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
+ bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs);
+ /* Perform endian conversion if necessary */
+ sgl->word0 = cpu_to_le32(sgl->word0);
+
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ else {
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+ }
+ shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (rc != MBX_TIMEOUT)
+ lpfc_sli4_mbox_cmd_free(phba, mbox);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2564 POST_SGL_BLOCK mailbox command failed "
+ "status x%x add_status x%x mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ rc = -ENXIO;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_fc_frame_check - Check that this frame is a valid frame to handle
+ * @phba: pointer to lpfc_hba struct that the frame was received on
+ * @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
+ *
+ * This function checks the fields in the @fc_hdr to see if the FC frame is a
+ * valid type of frame that the LPFC driver will handle. This function will
+ * return a zero if the frame is a valid frame or a non zero value when the
+ * frame does not pass the check.
+ **/
+static int
+lpfc_fc_frame_check(struct lpfc_hba *phba, struct fc_frame_header *fc_hdr)
+{
+ char *rctl_names[] = FC_RCTL_NAMES_INIT;
+ char *type_names[] = FC_TYPE_NAMES_INIT;
+ struct fc_vft_header *fc_vft_hdr;
+
+ switch (fc_hdr->fh_r_ctl) {
+ case FC_RCTL_DD_UNCAT: /* uncategorized information */
+ case FC_RCTL_DD_SOL_DATA: /* solicited data */
+ case FC_RCTL_DD_UNSOL_CTL: /* unsolicited control */
+ case FC_RCTL_DD_SOL_CTL: /* solicited control or reply */
+ case FC_RCTL_DD_UNSOL_DATA: /* unsolicited data */
+ case FC_RCTL_DD_DATA_DESC: /* data descriptor */
+ case FC_RCTL_DD_UNSOL_CMD: /* unsolicited command */
+ case FC_RCTL_DD_CMD_STATUS: /* command status */
+ case FC_RCTL_ELS_REQ: /* extended link services request */
+ case FC_RCTL_ELS_REP: /* extended link services reply */
+ case FC_RCTL_ELS4_REQ: /* FC-4 ELS request */
+ case FC_RCTL_ELS4_REP: /* FC-4 ELS reply */
+ case FC_RCTL_BA_NOP: /* basic link service NOP */
+ case FC_RCTL_BA_ABTS: /* basic link service abort */
+ case FC_RCTL_BA_RMC: /* remove connection */
+ case FC_RCTL_BA_ACC: /* basic accept */
+ case FC_RCTL_BA_RJT: /* basic reject */
+ case FC_RCTL_BA_PRMT:
+ case FC_RCTL_ACK_1: /* acknowledge_1 */
+ case FC_RCTL_ACK_0: /* acknowledge_0 */
+ case FC_RCTL_P_RJT: /* port reject */
+ case FC_RCTL_F_RJT: /* fabric reject */
+ case FC_RCTL_P_BSY: /* port busy */
+ case FC_RCTL_F_BSY: /* fabric busy to data frame */
+ case FC_RCTL_F_BSYL: /* fabric busy to link control frame */
+ case FC_RCTL_LCR: /* link credit reset */
+ case FC_RCTL_END: /* end */
+ break;
+ case FC_RCTL_VFTH: /* Virtual Fabric tagging Header */
+ fc_vft_hdr = (struct fc_vft_header *)fc_hdr;
+ fc_hdr = &((struct fc_frame_header *)fc_vft_hdr)[1];
+ return lpfc_fc_frame_check(phba, fc_hdr);
+ default:
+ goto drop;
+ }
+ switch (fc_hdr->fh_type) {
+ case FC_TYPE_BLS:
+ case FC_TYPE_ELS:
+ case FC_TYPE_FCP:
+ case FC_TYPE_CT:
+ break;
+ case FC_TYPE_IP:
+ case FC_TYPE_ILS:
+ default:
+ goto drop;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
+ "2538 Received frame rctl:%s type:%s\n",
+ rctl_names[fc_hdr->fh_r_ctl],
+ type_names[fc_hdr->fh_type]);
+ return 0;
+drop:
+ lpfc_printf_log(phba, KERN_WARNING, LOG_ELS,
+ "2539 Dropped frame rctl:%s type:%s\n",
+ rctl_names[fc_hdr->fh_r_ctl],
+ type_names[fc_hdr->fh_type]);
+ return 1;
+}
+
+/**
+ * lpfc_fc_hdr_get_vfi - Get the VFI from an FC frame
+ * @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
+ *
+ * This function processes the FC header to retrieve the VFI from the VF
+ * header, if one exists. This function will return the VFI if one exists
+ * or 0 if no VSAN Header exists.
+ **/
+static uint32_t
+lpfc_fc_hdr_get_vfi(struct fc_frame_header *fc_hdr)
+{
+ struct fc_vft_header *fc_vft_hdr = (struct fc_vft_header *)fc_hdr;
+
+ if (fc_hdr->fh_r_ctl != FC_RCTL_VFTH)
+ return 0;
+ return bf_get(fc_vft_hdr_vf_id, fc_vft_hdr);
+}
+
+/**
+ * lpfc_fc_frame_to_vport - Finds the vport that a frame is destined to
+ * @phba: Pointer to the HBA structure to search for the vport on
+ * @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
+ * @fcfi: The FC Fabric ID that the frame came from
+ *
+ * This function searches the @phba for a vport that matches the content of the
+ * @fc_hdr passed in and the @fcfi. This function uses the @fc_hdr to fetch the
+ * VFI, if the Virtual Fabric Tagging Header exists, and the DID. This function
+ * returns the matching vport pointer or NULL if unable to match frame to a
+ * vport.
+ **/
+static struct lpfc_vport *
+lpfc_fc_frame_to_vport(struct lpfc_hba *phba, struct fc_frame_header *fc_hdr,
+ uint16_t fcfi)
+{
+ struct lpfc_vport **vports;
+ struct lpfc_vport *vport = NULL;
+ int i;
+ uint32_t did = (fc_hdr->fh_d_id[0] << 16 |
+ fc_hdr->fh_d_id[1] << 8 |
+ fc_hdr->fh_d_id[2]);
+
+ vports = lpfc_create_vport_work_array(phba);
+ if (vports != NULL)
+ for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ if (phba->fcf.fcfi == fcfi &&
+ vports[i]->vfi == lpfc_fc_hdr_get_vfi(fc_hdr) &&
+ vports[i]->fc_myDID == did) {
+ vport = vports[i];
+ break;
+ }
+ }
+ lpfc_destroy_vport_work_array(phba, vports);
+ return vport;
+}
+
+/**
+ * lpfc_fc_frame_add - Adds a frame to the vport's list of received sequences
+ * @dmabuf: pointer to a dmabuf that describes the hdr and data of the FC frame
+ *
+ * This function searches through the existing incomplete sequences that have
+ * been sent to this @vport. If the frame matches one of the incomplete
+ * sequences then the dbuf in the @dmabuf is added to the list of frames that
+ * make up that sequence. If no sequence is found that matches this frame then
+ * the function will add the hbuf in the @dmabuf to the @vport's rcv_buffer_list
+ * This function returns a pointer to the first dmabuf in the sequence list that
+ * the frame was linked to.
+ **/
+static struct hbq_dmabuf *
+lpfc_fc_frame_add(struct lpfc_vport *vport, struct hbq_dmabuf *dmabuf)
+{
+ struct fc_frame_header *new_hdr;
+ struct fc_frame_header *temp_hdr;
+ struct lpfc_dmabuf *d_buf;
+ struct lpfc_dmabuf *h_buf;
+ struct hbq_dmabuf *seq_dmabuf = NULL;
+ struct hbq_dmabuf *temp_dmabuf = NULL;
+
+ new_hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+ /* Use the hdr_buf to find the sequence that this frame belongs to */
+ list_for_each_entry(h_buf, &vport->rcv_buffer_list, list) {
+ temp_hdr = (struct fc_frame_header *)h_buf->virt;
+ if ((temp_hdr->fh_seq_id != new_hdr->fh_seq_id) ||
+ (temp_hdr->fh_ox_id != new_hdr->fh_ox_id) ||
+ (memcmp(&temp_hdr->fh_s_id, &new_hdr->fh_s_id, 3)))
+ continue;
+ /* found a pending sequence that matches this frame */
+ seq_dmabuf = container_of(h_buf, struct hbq_dmabuf, hbuf);
+ break;
+ }
+ if (!seq_dmabuf) {
+ /*
+ * This indicates first frame received for this sequence.
+ * Queue the buffer on the vport's rcv_buffer_list.
+ */
+ list_add_tail(&dmabuf->hbuf.list, &vport->rcv_buffer_list);
+ return dmabuf;
+ }
+ temp_hdr = seq_dmabuf->hbuf.virt;
+ if (new_hdr->fh_seq_cnt < temp_hdr->fh_seq_cnt) {
+ list_add(&seq_dmabuf->dbuf.list, &dmabuf->dbuf.list);
+ return dmabuf;
+ }
+ /* find the correct place in the sequence to insert this frame */
+ list_for_each_entry_reverse(d_buf, &seq_dmabuf->dbuf.list, list) {
+ temp_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf);
+ temp_hdr = (struct fc_frame_header *)temp_dmabuf->hbuf.virt;
+ /*
+ * If the frame's sequence count is greater than the frame on
+ * the list then insert the frame right after this frame
+ */
+ if (new_hdr->fh_seq_cnt > temp_hdr->fh_seq_cnt) {
+ list_add(&dmabuf->dbuf.list, &temp_dmabuf->dbuf.list);
+ return seq_dmabuf;
+ }
+ }
+ return NULL;
+}
+
+/**
+ * lpfc_seq_complete - Indicates if a sequence is complete
+ * @dmabuf: pointer to a dmabuf that describes the FC sequence
+ *
+ * This function checks the sequence, starting with the frame described by
+ * @dmabuf, to see if all the frames associated with this sequence are present.
+ * the frames associated with this sequence are linked to the @dmabuf using the
+ * dbuf list. This function looks for two major things. 1) That the first frame
+ * has a sequence count of zero. 2) There is a frame with last frame of sequence
+ * set. 3) That there are no holes in the sequence count. The function will
+ * return 1 when the sequence is complete, otherwise it will return 0.
+ **/
+static int
+lpfc_seq_complete(struct hbq_dmabuf *dmabuf)
+{
+ struct fc_frame_header *hdr;
+ struct lpfc_dmabuf *d_buf;
+ struct hbq_dmabuf *seq_dmabuf;
+ uint32_t fctl;
+ int seq_count = 0;
+
+ hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+ /* make sure first fame of sequence has a sequence count of zero */
+ if (hdr->fh_seq_cnt != seq_count)
+ return 0;
+ fctl = (hdr->fh_f_ctl[0] << 16 |
+ hdr->fh_f_ctl[1] << 8 |
+ hdr->fh_f_ctl[2]);
+ /* If last frame of sequence we can return success. */
+ if (fctl & FC_FC_END_SEQ)
+ return 1;
+ list_for_each_entry(d_buf, &dmabuf->dbuf.list, list) {
+ seq_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf);
+ hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
+ /* If there is a hole in the sequence count then fail. */
+ if (++seq_count != hdr->fh_seq_cnt)
+ return 0;
+ fctl = (hdr->fh_f_ctl[0] << 16 |
+ hdr->fh_f_ctl[1] << 8 |
+ hdr->fh_f_ctl[2]);
+ /* If last frame of sequence we can return success. */
+ if (fctl & FC_FC_END_SEQ)
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * lpfc_prep_seq - Prep sequence for ULP processing
+ * @vport: Pointer to the vport on which this sequence was received
+ * @dmabuf: pointer to a dmabuf that describes the FC sequence
+ *
+ * This function takes a sequence, described by a list of frames, and creates
+ * a list of iocbq structures to describe the sequence. This iocbq list will be
+ * used to issue to the generic unsolicited sequence handler. This routine
+ * returns a pointer to the first iocbq in the list. If the function is unable
+ * to allocate an iocbq then it throw out the received frames that were not
+ * able to be described and return a pointer to the first iocbq. If unable to
+ * allocate any iocbqs (including the first) this function will return NULL.
+ **/
+static struct lpfc_iocbq *
+lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf)
+{
+ struct lpfc_dmabuf *d_buf, *n_buf;
+ struct lpfc_iocbq *first_iocbq, *iocbq;
+ struct fc_frame_header *fc_hdr;
+ uint32_t sid;
+
+ fc_hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
+ /* remove from receive buffer list */
+ list_del_init(&seq_dmabuf->hbuf.list);
+ /* get the Remote Port's SID */
+ sid = (fc_hdr->fh_s_id[0] << 16 |
+ fc_hdr->fh_s_id[1] << 8 |
+ fc_hdr->fh_s_id[2]);
+ /* Get an iocbq struct to fill in. */
+ first_iocbq = lpfc_sli_get_iocbq(vport->phba);
+ if (first_iocbq) {
+ /* Initialize the first IOCB. */
+ first_iocbq->iocb.ulpStatus = IOSTAT_SUCCESS;
+ first_iocbq->iocb.ulpCommand = CMD_IOCB_RCV_SEQ64_CX;
+ first_iocbq->iocb.ulpContext = be16_to_cpu(fc_hdr->fh_ox_id);
+ first_iocbq->iocb.unsli3.rcvsli3.vpi =
+ vport->vpi + vport->phba->vpi_base;
+ /* put the first buffer into the first IOCBq */
+ first_iocbq->context2 = &seq_dmabuf->dbuf;
+ first_iocbq->context3 = NULL;
+ first_iocbq->iocb.ulpBdeCount = 1;
+ first_iocbq->iocb.un.cont64[0].tus.f.bdeSize =
+ LPFC_DATA_BUF_SIZE;
+ first_iocbq->iocb.un.rcvels.remoteID = sid;
+ }
+ iocbq = first_iocbq;
+ /*
+ * Each IOCBq can have two Buffers assigned, so go through the list
+ * of buffers for this sequence and save two buffers in each IOCBq
+ */
+ list_for_each_entry_safe(d_buf, n_buf, &seq_dmabuf->dbuf.list, list) {
+ if (!iocbq) {
+ lpfc_in_buf_free(vport->phba, d_buf);
+ continue;
+ }
+ if (!iocbq->context3) {
+ iocbq->context3 = d_buf;
+ iocbq->iocb.ulpBdeCount++;
+ iocbq->iocb.unsli3.rcvsli3.bde2.tus.f.bdeSize =
+ LPFC_DATA_BUF_SIZE;
+ } else {
+ iocbq = lpfc_sli_get_iocbq(vport->phba);
+ if (!iocbq) {
+ if (first_iocbq) {
+ first_iocbq->iocb.ulpStatus =
+ IOSTAT_FCP_RSP_ERROR;
+ first_iocbq->iocb.un.ulpWord[4] =
+ IOERR_NO_RESOURCES;
+ }
+ lpfc_in_buf_free(vport->phba, d_buf);
+ continue;
+ }
+ iocbq->context2 = d_buf;
+ iocbq->context3 = NULL;
+ iocbq->iocb.ulpBdeCount = 1;
+ iocbq->iocb.un.cont64[0].tus.f.bdeSize =
+ LPFC_DATA_BUF_SIZE;
+ iocbq->iocb.un.rcvels.remoteID = sid;
+ list_add_tail(&iocbq->list, &first_iocbq->list);
+ }
+ }
+ return first_iocbq;
+}
+
+/**
+ * lpfc_sli4_handle_received_buffer - Handle received buffers from firmware
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called with no lock held. This function processes all
+ * the received buffers and gives it to upper layers when a received buffer
+ * indicates that it is the final frame in the sequence. The interrupt
+ * service routine processes received buffers at interrupt contexts and adds
+ * received dma buffers to the rb_pend_list queue and signals the worker thread.
+ * Worker thread calls lpfc_sli4_handle_received_buffer, which will call the
+ * appropriate receive function when the final frame in a sequence is received.
+ **/
+int
+lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba)
+{
+ LIST_HEAD(cmplq);
+ struct hbq_dmabuf *dmabuf, *seq_dmabuf;
+ struct fc_frame_header *fc_hdr;
+ struct lpfc_vport *vport;
+ uint32_t fcfi;
+ struct lpfc_iocbq *iocbq;
+
+ /* Clear hba flag and get all received buffers into the cmplq */
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~HBA_RECEIVE_BUFFER;
+ list_splice_init(&phba->rb_pend_list, &cmplq);
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Process each received buffer */
+ while ((dmabuf = lpfc_sli_hbqbuf_get(&cmplq)) != NULL) {
+ fc_hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+ /* check to see if this a valid type of frame */
+ if (lpfc_fc_frame_check(phba, fc_hdr)) {
+ lpfc_in_buf_free(phba, &dmabuf->dbuf);
+ continue;
+ }
+ fcfi = bf_get(lpfc_rcqe_fcf_id, &dmabuf->rcqe);
+ vport = lpfc_fc_frame_to_vport(phba, fc_hdr, fcfi);
+ if (!vport) {
+ /* throw out the frame */
+ lpfc_in_buf_free(phba, &dmabuf->dbuf);
+ continue;
+ }
+ /* Link this frame */
+ seq_dmabuf = lpfc_fc_frame_add(vport, dmabuf);
+ if (!seq_dmabuf) {
+ /* unable to add frame to vport - throw it out */
+ lpfc_in_buf_free(phba, &dmabuf->dbuf);
+ continue;
+ }
+ /* If not last frame in sequence continue processing frames. */
+ if (!lpfc_seq_complete(seq_dmabuf)) {
+ /*
+ * When saving off frames post a new one and mark this
+ * frame to be freed when it is finished.
+ **/
+ lpfc_sli_hbqbuf_fill_hbqs(phba, LPFC_ELS_HBQ, 1);
+ dmabuf->tag = -1;
+ continue;
+ }
+ fc_hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
+ iocbq = lpfc_prep_seq(vport, seq_dmabuf);
+ if (!lpfc_complete_unsol_iocb(phba,
+ &phba->sli.ring[LPFC_ELS_RING],
+ iocbq, fc_hdr->fh_r_ctl,
+ fc_hdr->fh_type))
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "2540 Ring %d handler: unexpected Rctl "
+ "x%x Type x%x received\n",
+ LPFC_ELS_RING,
+ fc_hdr->fh_r_ctl, fc_hdr->fh_type);
+ };
+ return 0;
+}
+
+/**
+ * lpfc_sli4_post_all_rpi_hdrs - Post the rpi header memory region to the port
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post rpi header templates to the
+ * HBA consistent with the SLI-4 interface spec. This routine
+ * posts a PAGE_SIZE memory region to the port to hold up to
+ * PAGE_SIZE modulo 64 rpi context headers.
+ *
+ * This routine does not require any locks. It's usage is expected
+ * to be driver load or reset recovery when the driver is
+ * sequential.
+ *
+ * Return codes
+ * 0 - sucessful
+ * EIO - The mailbox failed to complete successfully.
+ * When this error occurs, the driver is not guaranteed
+ * to have any rpi regions posted to the device and
+ * must either attempt to repost the regions or take a
+ * fatal error.
+ **/
+int
+lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *phba)
+{
+ struct lpfc_rpi_hdr *rpi_page;
+ uint32_t rc = 0;
+
+ /* Post all rpi memory regions to the port. */
+ list_for_each_entry(rpi_page, &phba->sli4_hba.lpfc_rpi_hdr_list, list) {
+ rc = lpfc_sli4_post_rpi_hdr(phba, rpi_page);
+ if (rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2008 Error %d posting all rpi "
+ "headers\n", rc);
+ rc = -EIO;
+ break;
+ }
+ }
+
+ return rc;
+}
+
+/**
+ * lpfc_sli4_post_rpi_hdr - Post an rpi header memory region to the port
+ * @phba: pointer to lpfc hba data structure.
+ * @rpi_page: pointer to the rpi memory region.
+ *
+ * This routine is invoked to post a single rpi header to the
+ * HBA consistent with the SLI-4 interface spec. This memory region
+ * maps up to 64 rpi context regions.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No available memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page)
+{
+ LPFC_MBOXQ_t *mboxq;
+ struct lpfc_mbx_post_hdr_tmpl *hdr_tmpl;
+ uint32_t rc = 0;
+ uint32_t mbox_tmo;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ /* The port is notified of the header region via a mailbox command. */
+ mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2001 Unable to allocate memory for issuing "
+ "SLI_CONFIG_SPECIAL mailbox command\n");
+ return -ENOMEM;
+ }
+
+ /* Post all rpi memory regions to the port. */
+ hdr_tmpl = &mboxq->u.mqe.un.hdr_tmpl;
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE,
+ sizeof(struct lpfc_mbx_post_hdr_tmpl) -
+ sizeof(struct mbox_header), LPFC_SLI4_MBX_EMBED);
+ bf_set(lpfc_mbx_post_hdr_tmpl_page_cnt,
+ hdr_tmpl, rpi_page->page_count);
+ bf_set(lpfc_mbx_post_hdr_tmpl_rpi_offset, hdr_tmpl,
+ rpi_page->start_rpi);
+ hdr_tmpl->rpi_paddr_lo = putPaddrLow(rpi_page->dmabuf->phys);
+ hdr_tmpl->rpi_paddr_hi = putPaddrHigh(rpi_page->dmabuf->phys);
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ else
+ rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+ shdr = (union lpfc_sli4_cfg_shdr *) &hdr_tmpl->header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2514 POST_RPI_HDR mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ rc = -ENXIO;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_sli4_alloc_rpi - Get an available rpi in the device's range
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post rpi header templates to the
+ * HBA consistent with the SLI-4 interface spec. This routine
+ * posts a PAGE_SIZE memory region to the port to hold up to
+ * PAGE_SIZE modulo 64 rpi context headers.
+ *
+ * Returns
+ * A nonzero rpi defined as rpi_base <= rpi < max_rpi if sucessful
+ * LPFC_RPI_ALLOC_ERROR if no rpis are available.
+ **/
+int
+lpfc_sli4_alloc_rpi(struct lpfc_hba *phba)
+{
+ int rpi;
+ uint16_t max_rpi, rpi_base, rpi_limit;
+ uint16_t rpi_remaining;
+ struct lpfc_rpi_hdr *rpi_hdr;
+
+ max_rpi = phba->sli4_hba.max_cfg_param.max_rpi;
+ rpi_base = phba->sli4_hba.max_cfg_param.rpi_base;
+ rpi_limit = phba->sli4_hba.next_rpi;
+
+ /*
+ * The valid rpi range is not guaranteed to be zero-based. Start
+ * the search at the rpi_base as reported by the port.
+ */
+ spin_lock_irq(&phba->hbalock);
+ rpi = find_next_zero_bit(phba->sli4_hba.rpi_bmask, rpi_limit, rpi_base);
+ if (rpi >= rpi_limit || rpi < rpi_base)
+ rpi = LPFC_RPI_ALLOC_ERROR;
+ else {
+ set_bit(rpi, phba->sli4_hba.rpi_bmask);
+ phba->sli4_hba.max_cfg_param.rpi_used++;
+ phba->sli4_hba.rpi_count++;
+ }
+
+ /*
+ * Don't try to allocate more rpi header regions if the device limit
+ * on available rpis max has been exhausted.
+ */
+ if ((rpi == LPFC_RPI_ALLOC_ERROR) &&
+ (phba->sli4_hba.rpi_count >= max_rpi)) {
+ spin_unlock_irq(&phba->hbalock);
+ return rpi;
+ }
+
+ /*
+ * If the driver is running low on rpi resources, allocate another
+ * page now. Note that the next_rpi value is used because
+ * it represents how many are actually in use whereas max_rpi notes
+ * how many are supported max by the device.
+ */
+ rpi_remaining = phba->sli4_hba.next_rpi - rpi_base -
+ phba->sli4_hba.rpi_count;
+ spin_unlock_irq(&phba->hbalock);
+ if (rpi_remaining < LPFC_RPI_LOW_WATER_MARK) {
+ rpi_hdr = lpfc_sli4_create_rpi_hdr(phba);
+ if (!rpi_hdr) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2002 Error Could not grow rpi "
+ "count\n");
+ } else {
+ lpfc_sli4_post_rpi_hdr(phba, rpi_hdr);
+ }
+ }
+
+ return rpi;
+}
+
+/**
+ * lpfc_sli4_free_rpi - Release an rpi for reuse.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to release an rpi to the pool of
+ * available rpis maintained by the driver.
+ **/
+void
+lpfc_sli4_free_rpi(struct lpfc_hba *phba, int rpi)
+{
+ spin_lock_irq(&phba->hbalock);
+ clear_bit(rpi, phba->sli4_hba.rpi_bmask);
+ phba->sli4_hba.rpi_count--;
+ phba->sli4_hba.max_cfg_param.rpi_used--;
+ spin_unlock_irq(&phba->hbalock);
+}
+
+/**
+ * lpfc_sli4_remove_rpis - Remove the rpi bitmask region
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to remove the memory region that
+ * provided rpi via a bitmask.
+ **/
+void
+lpfc_sli4_remove_rpis(struct lpfc_hba *phba)
+{
+ kfree(phba->sli4_hba.rpi_bmask);
+}
+
+/**
+ * lpfc_sli4_resume_rpi - Remove the rpi bitmask region
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to remove the memory region that
+ * provided rpi via a bitmask.
+ **/
+int
+lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp)
+{
+ LPFC_MBOXQ_t *mboxq;
+ struct lpfc_hba *phba = ndlp->phba;
+ int rc;
+
+ /* The port is notified of the header region via a mailbox command. */
+ mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq)
+ return -ENOMEM;
+
+ /* Post all rpi memory regions to the port. */
+ lpfc_resume_rpi(mboxq, ndlp);
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+ if (rc == MBX_NOT_FINISHED) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2010 Resume RPI Mailbox failed "
+ "status %d, mbxStatus x%x\n", rc,
+ bf_get(lpfc_mqe_status, &mboxq->u.mqe));
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return -EIO;
+ }
+ return 0;
+}
+
+/**
+ * lpfc_sli4_init_vpi - Initialize a vpi with the port
+ * @phba: pointer to lpfc hba data structure.
+ * @vpi: vpi value to activate with the port.
+ *
+ * This routine is invoked to activate a vpi with the
+ * port when the host intends to use vports with a
+ * nonzero vpi.
+ *
+ * Returns:
+ * 0 success
+ * -Evalue otherwise
+ **/
+int
+lpfc_sli4_init_vpi(struct lpfc_hba *phba, uint16_t vpi)
+{
+ LPFC_MBOXQ_t *mboxq;
+ int rc = 0;
+ uint32_t mbox_tmo;
+
+ if (vpi == 0)
+ return -EINVAL;
+ mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq)
+ return -ENOMEM;
+ lpfc_init_vpi(mboxq, vpi);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_INIT_VPI);
+ rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ if (rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2022 INIT VPI Mailbox failed "
+ "status %d, mbxStatus x%x\n", rc,
+ bf_get(lpfc_mqe_status, &mboxq->u.mqe));
+ rc = -EIO;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_mbx_cmpl_add_fcf_record - add fcf mbox completion handler.
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * This routine is invoked to manually add a single FCF record. The caller
+ * must pass a completely initialized FCF_Record. This routine takes
+ * care of the nonembedded mailbox operations.
+ **/
+static void
+lpfc_mbx_cmpl_add_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+ void *virt_addr;
+ union lpfc_sli4_cfg_shdr *shdr;
+ uint32_t shdr_status, shdr_add_status;
+
+ virt_addr = mboxq->sge_array->addr[0];
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *) virt_addr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+
+ if ((shdr_status || shdr_add_status) &&
+ (shdr_status != STATUS_FCF_IN_USE))
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2558 ADD_FCF_RECORD mailbox failed with "
+ "status x%x add_status x%x\n",
+ shdr_status, shdr_add_status);
+
+ lpfc_sli4_mbox_cmd_free(phba, mboxq);
+}
+
+/**
+ * lpfc_sli4_add_fcf_record - Manually add an FCF Record.
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_record: pointer to the initialized fcf record to add.
+ *
+ * This routine is invoked to manually add a single FCF record. The caller
+ * must pass a completely initialized FCF_Record. This routine takes
+ * care of the nonembedded mailbox operations.
+ **/
+int
+lpfc_sli4_add_fcf_record(struct lpfc_hba *phba, struct fcf_record *fcf_record)
+{
+ int rc = 0;
+ LPFC_MBOXQ_t *mboxq;
+ uint8_t *bytep;
+ void *virt_addr;
+ dma_addr_t phys_addr;
+ struct lpfc_mbx_sge sge;
+ uint32_t alloc_len, req_len;
+ uint32_t fcfindex;
+
+ mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2009 Failed to allocate mbox for ADD_FCF cmd\n");
+ return -ENOMEM;
+ }
+
+ req_len = sizeof(struct fcf_record) + sizeof(union lpfc_sli4_cfg_shdr) +
+ sizeof(uint32_t);
+
+ /* Allocate DMA memory and set up the non-embedded mailbox command */
+ alloc_len = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_ADD_FCF,
+ req_len, LPFC_SLI4_MBX_NEMBED);
+ if (alloc_len < req_len) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2523 Allocated DMA memory size (x%x) is "
+ "less than the requested DMA memory "
+ "size (x%x)\n", alloc_len, req_len);
+ lpfc_sli4_mbox_cmd_free(phba, mboxq);
+ return -ENOMEM;
+ }
+
+ /*
+ * Get the first SGE entry from the non-embedded DMA memory. This
+ * routine only uses a single SGE.
+ */
+ lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
+ phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
+ if (unlikely(!mboxq->sge_array)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+ "2526 Failed to get the non-embedded SGE "
+ "virtual address\n");
+ lpfc_sli4_mbox_cmd_free(phba, mboxq);
+ return -ENOMEM;
+ }
+ virt_addr = mboxq->sge_array->addr[0];
+ /*
+ * Configure the FCF record for FCFI 0. This is the driver's
+ * hardcoded default and gets used in nonFIP mode.
+ */
+ fcfindex = bf_get(lpfc_fcf_record_fcf_index, fcf_record);
+ bytep = virt_addr + sizeof(union lpfc_sli4_cfg_shdr);
+ lpfc_sli_pcimem_bcopy(&fcfindex, bytep, sizeof(uint32_t));
+
+ /*
+ * Copy the fcf_index and the FCF Record Data. The data starts after
+ * the FCoE header plus word10. The data copy needs to be endian
+ * correct.
+ */
+ bytep += sizeof(uint32_t);
+ lpfc_sli_pcimem_bcopy(fcf_record, bytep, sizeof(struct fcf_record));
+ mboxq->vport = phba->pport;
+ mboxq->mbox_cmpl = lpfc_mbx_cmpl_add_fcf_record;
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+ if (rc == MBX_NOT_FINISHED) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2515 ADD_FCF_RECORD mailbox failed with "
+ "status 0x%x\n", rc);
+ lpfc_sli4_mbox_cmd_free(phba, mboxq);
+ rc = -EIO;
+ } else
+ rc = 0;
+
+ return rc;
+}
+
+/**
+ * lpfc_sli4_build_dflt_fcf_record - Build the driver's default FCF Record.
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_record: pointer to the fcf record to write the default data.
+ * @fcf_index: FCF table entry index.
+ *
+ * This routine is invoked to build the driver's default FCF record. The
+ * values used are hardcoded. This routine handles memory initialization.
+ *
+ **/
+void
+lpfc_sli4_build_dflt_fcf_record(struct lpfc_hba *phba,
+ struct fcf_record *fcf_record,
+ uint16_t fcf_index)
+{
+ memset(fcf_record, 0, sizeof(struct fcf_record));
+ fcf_record->max_rcv_size = LPFC_FCOE_MAX_RCV_SIZE;
+ fcf_record->fka_adv_period = LPFC_FCOE_FKA_ADV_PER;
+ fcf_record->fip_priority = LPFC_FCOE_FIP_PRIORITY;
+ bf_set(lpfc_fcf_record_mac_0, fcf_record, phba->fc_map[0]);
+ bf_set(lpfc_fcf_record_mac_1, fcf_record, phba->fc_map[1]);
+ bf_set(lpfc_fcf_record_mac_2, fcf_record, phba->fc_map[2]);
+ bf_set(lpfc_fcf_record_mac_3, fcf_record, LPFC_FCOE_FCF_MAC3);
+ bf_set(lpfc_fcf_record_mac_4, fcf_record, LPFC_FCOE_FCF_MAC4);
+ bf_set(lpfc_fcf_record_mac_5, fcf_record, LPFC_FCOE_FCF_MAC5);
+ bf_set(lpfc_fcf_record_fc_map_0, fcf_record, phba->fc_map[0]);
+ bf_set(lpfc_fcf_record_fc_map_1, fcf_record, phba->fc_map[1]);
+ bf_set(lpfc_fcf_record_fc_map_2, fcf_record, phba->fc_map[2]);
+ bf_set(lpfc_fcf_record_fcf_valid, fcf_record, 1);
+ bf_set(lpfc_fcf_record_fcf_index, fcf_record, fcf_index);
+ bf_set(lpfc_fcf_record_mac_addr_prov, fcf_record,
+ LPFC_FCF_FPMA | LPFC_FCF_SPMA);
+ /* Set the VLAN bit map */
+ if (phba->valid_vlan) {
+ fcf_record->vlan_bitmap[phba->vlan_id / 8]
+ = 1 << (phba->vlan_id % 8);
+ }
+}
+
+/**
+ * lpfc_sli4_read_fcf_record - Read the driver's default FCF Record.
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_index: FCF table entry offset.
+ *
+ * This routine is invoked to read up to @fcf_num of FCF record from the
+ * device starting with the given @fcf_index.
+ **/
+int
+lpfc_sli4_read_fcf_record(struct lpfc_hba *phba, uint16_t fcf_index)
+{
+ int rc = 0, error;
+ LPFC_MBOXQ_t *mboxq;
+ void *virt_addr;
+ dma_addr_t phys_addr;
+ uint8_t *bytep;
+ struct lpfc_mbx_sge sge;
+ uint32_t alloc_len, req_len;
+ struct lpfc_mbx_read_fcf_tbl *read_fcf;
+
+ mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2000 Failed to allocate mbox for "
+ "READ_FCF cmd\n");
+ return -ENOMEM;
+ }
+
+ req_len = sizeof(struct fcf_record) +
+ sizeof(union lpfc_sli4_cfg_shdr) + 2 * sizeof(uint32_t);
+
+ /* Set up READ_FCF SLI4_CONFIG mailbox-ioctl command */
+ alloc_len = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_READ_FCF_TABLE, req_len,
+ LPFC_SLI4_MBX_NEMBED);
+
+ if (alloc_len < req_len) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0291 Allocated DMA memory size (x%x) is "
+ "less than the requested DMA memory "
+ "size (x%x)\n", alloc_len, req_len);
+ lpfc_sli4_mbox_cmd_free(phba, mboxq);
+ return -ENOMEM;
+ }
+
+ /* Get the first SGE entry from the non-embedded DMA memory. This
+ * routine only uses a single SGE.
+ */
+ lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
+ phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
+ if (unlikely(!mboxq->sge_array)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+ "2527 Failed to get the non-embedded SGE "
+ "virtual address\n");
+ lpfc_sli4_mbox_cmd_free(phba, mboxq);
+ return -ENOMEM;
+ }
+ virt_addr = mboxq->sge_array->addr[0];
+ read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr;
+
+ /* Set up command fields */
+ bf_set(lpfc_mbx_read_fcf_tbl_indx, &read_fcf->u.request, fcf_index);
+ /* Perform necessary endian conversion */
+ bytep = virt_addr + sizeof(union lpfc_sli4_cfg_shdr);
+ lpfc_sli_pcimem_bcopy(bytep, bytep, sizeof(uint32_t));
+ mboxq->vport = phba->pport;
+ mboxq->mbox_cmpl = lpfc_mbx_cmpl_read_fcf_record;
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+ if (rc == MBX_NOT_FINISHED) {
+ lpfc_sli4_mbox_cmd_free(phba, mboxq);
+ error = -EIO;
+ } else
+ error = 0;
+ return error;
+}
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index 8839386..7d37eb7 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -29,13 +29,23 @@ typedef enum _lpfc_ctx_cmd {
LPFC_CTX_HOST
} lpfc_ctx_cmd;
+/* This structure is used to carry the needed response IOCB states */
+struct lpfc_sli4_rspiocb_info {
+ uint8_t hw_status;
+ uint8_t bfield;
+#define LPFC_XB 0x1
+#define LPFC_PV 0x2
+ uint8_t priority;
+ uint8_t reserved;
+};
+
/* This structure is used to handle IOCB requests / responses */
struct lpfc_iocbq {
/* lpfc_iocbqs are used in double linked lists */
struct list_head list;
struct list_head clist;
uint16_t iotag; /* pre-assigned IO tag */
- uint16_t rsvd1;
+ uint16_t sli4_xritag; /* pre-assigned XRI, (OXID) tag. */
IOCB_t iocb; /* IOCB cmd */
uint8_t retry; /* retry counter for IOCB cmd - if needed */
@@ -65,7 +75,7 @@ struct lpfc_iocbq {
struct lpfc_iocbq *);
void (*iocb_cmpl) (struct lpfc_hba *, struct lpfc_iocbq *,
struct lpfc_iocbq *);
-
+ struct lpfc_sli4_rspiocb_info sli4_info;
};
#define SLI_IOCB_RET_IOCB 1 /* Return IOCB if cmd ring full */
@@ -81,14 +91,18 @@ struct lpfc_iocbq {
typedef struct lpfcMboxq {
/* MBOXQs are used in single linked lists */
struct list_head list; /* ptr to next mailbox command */
- MAILBOX_t mb; /* Mailbox cmd */
- struct lpfc_vport *vport;/* virutal port pointer */
+ union {
+ MAILBOX_t mb; /* Mailbox cmd */
+ struct lpfc_mqe mqe;
+ } u;
+ struct lpfc_vport *vport;/* virtual port pointer */
void *context1; /* caller context information */
void *context2; /* caller context information */
void (*mbox_cmpl) (struct lpfc_hba *, struct lpfcMboxq *);
uint8_t mbox_flag;
-
+ struct lpfc_mcqe mcqe;
+ struct lpfc_mbx_nembed_sge_virt *sge_array;
} LPFC_MBOXQ_t;
#define MBX_POLL 1 /* poll mailbox till command done, then
@@ -230,10 +244,11 @@ struct lpfc_sli {
/* Additional sli_flags */
#define LPFC_SLI_MBOX_ACTIVE 0x100 /* HBA mailbox is currently active */
-#define LPFC_SLI2_ACTIVE 0x200 /* SLI2 overlay in firmware is active */
+#define LPFC_SLI_ACTIVE 0x200 /* SLI in firmware is active */
#define LPFC_PROCESS_LA 0x400 /* Able to process link attention */
#define LPFC_BLOCK_MGMT_IO 0x800 /* Don't allow mgmt mbx or iocb cmds */
#define LPFC_MENLO_MAINT 0x1000 /* need for menl fw download */
+#define LPFC_SLI_ASYNC_MBX_BLK 0x2000 /* Async mailbox is blocked */
struct lpfc_sli_ring ring[LPFC_MAX_RING];
int fcp_ring; /* ring used for FCP initiator commands */
@@ -261,6 +276,8 @@ struct lpfc_sli {
#define LPFC_MBOX_TMO 30 /* Sec tmo for outstanding mbox
command */
+#define LPFC_MBOX_SLI4_CONFIG_TMO 60 /* Sec tmo for outstanding mbox
+ command */
#define LPFC_MBOX_TMO_FLASH_CMD 300 /* Sec tmo for outstanding FLASH write
* or erase cmds. This is especially
* long because of the potential of
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
new file mode 100644
index 0000000..5196b466
--- /dev/null
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -0,0 +1,467 @@
+/*******************************************************************
+ * This file is part of the Emulex Linux Device Driver for *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2009 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
+ * www.emulex.com *
+ * *
+ * This program is free software; you can redistribute it and/or *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
+ *******************************************************************/
+
+#define LPFC_ACTIVE_MBOX_WAIT_CNT 100
+#define LPFC_RELEASE_NOTIFICATION_INTERVAL 32
+#define LPFC_GET_QE_REL_INT 32
+#define LPFC_RPI_LOW_WATER_MARK 10
+/* Number of SGL entries can be posted in a 4KB nonembedded mbox command */
+#define LPFC_NEMBED_MBOX_SGL_CNT 254
+
+/* Multi-queue arrangement for fast-path FCP work queues */
+#define LPFC_FN_EQN_MAX 8
+#define LPFC_SP_EQN_DEF 1
+#define LPFC_FP_EQN_DEF 1
+#define LPFC_FP_EQN_MIN 1
+#define LPFC_FP_EQN_MAX (LPFC_FN_EQN_MAX - LPFC_SP_EQN_DEF)
+
+#define LPFC_FN_WQN_MAX 32
+#define LPFC_SP_WQN_DEF 1
+#define LPFC_FP_WQN_DEF 4
+#define LPFC_FP_WQN_MIN 1
+#define LPFC_FP_WQN_MAX (LPFC_FN_WQN_MAX - LPFC_SP_WQN_DEF)
+
+/*
+ * Provide the default FCF Record attributes used by the driver
+ * when nonFIP mode is configured and there is no other default
+ * FCF Record attributes.
+ */
+#define LPFC_FCOE_FCF_DEF_INDEX 0
+#define LPFC_FCOE_FCF_GET_FIRST 0xFFFF
+#define LPFC_FCOE_FCF_NEXT_NONE 0xFFFF
+
+/* First 3 bytes of default FCF MAC is specified by FC_MAP */
+#define LPFC_FCOE_FCF_MAC3 0xFF
+#define LPFC_FCOE_FCF_MAC4 0xFF
+#define LPFC_FCOE_FCF_MAC5 0xFE
+#define LPFC_FCOE_FCF_MAP0 0x0E
+#define LPFC_FCOE_FCF_MAP1 0xFC
+#define LPFC_FCOE_FCF_MAP2 0x00
+#define LPFC_FCOE_MAX_RCV_SIZE 0x5AC
+#define LPFC_FCOE_FKA_ADV_PER 0
+#define LPFC_FCOE_FIP_PRIORITY 0x80
+
+enum lpfc_sli4_queue_type {
+ LPFC_EQ,
+ LPFC_GCQ,
+ LPFC_MCQ,
+ LPFC_WCQ,
+ LPFC_RCQ,
+ LPFC_MQ,
+ LPFC_WQ,
+ LPFC_HRQ,
+ LPFC_DRQ
+};
+
+/* The queue sub-type defines the functional purpose of the queue */
+enum lpfc_sli4_queue_subtype {
+ LPFC_NONE,
+ LPFC_MBOX,
+ LPFC_FCP,
+ LPFC_ELS,
+ LPFC_USOL
+};
+
+union sli4_qe {
+ void *address;
+ struct lpfc_eqe *eqe;
+ struct lpfc_cqe *cqe;
+ struct lpfc_mcqe *mcqe;
+ struct lpfc_wcqe_complete *wcqe_complete;
+ struct lpfc_wcqe_release *wcqe_release;
+ struct sli4_wcqe_xri_aborted *wcqe_xri_aborted;
+ struct lpfc_rcqe_complete *rcqe_complete;
+ struct lpfc_mqe *mqe;
+ union lpfc_wqe *wqe;
+ struct lpfc_rqe *rqe;
+};
+
+struct lpfc_queue {
+ struct list_head list;
+ enum lpfc_sli4_queue_type type;
+ enum lpfc_sli4_queue_subtype subtype;
+ struct lpfc_hba *phba;
+ struct list_head child_list;
+ uint32_t entry_count; /* Number of entries to support on the queue */
+ uint32_t entry_size; /* Size of each queue entry. */
+ uint32_t queue_id; /* Queue ID assigned by the hardware */
+ struct list_head page_list;
+ uint32_t page_count; /* Number of pages allocated for this queue */
+
+ uint32_t host_index; /* The host's index for putting or getting */
+ uint32_t hba_index; /* The last known hba index for get or put */
+ union sli4_qe qe[1]; /* array to index entries (must be last) */
+};
+
+struct lpfc_cq_event {
+ struct list_head list;
+ union {
+ struct lpfc_mcqe mcqe_cmpl;
+ struct lpfc_acqe_link acqe_link;
+ struct lpfc_acqe_fcoe acqe_fcoe;
+ struct lpfc_acqe_dcbx acqe_dcbx;
+ struct lpfc_rcqe rcqe_cmpl;
+ struct sli4_wcqe_xri_aborted wcqe_axri;
+ } cqe;
+};
+
+struct lpfc_sli4_link {
+ uint8_t speed;
+ uint8_t duplex;
+ uint8_t status;
+ uint8_t physical;
+ uint8_t fault;
+};
+
+struct lpfc_fcf {
+ uint8_t fabric_name[8];
+ uint8_t mac_addr[6];
+ uint16_t fcf_indx;
+ uint16_t fcfi;
+ uint32_t fcf_flag;
+#define FCF_AVAILABLE 0x01 /* FCF available for discovery */
+#define FCF_REGISTERED 0x02 /* FCF registered with FW */
+#define FCF_DISCOVERED 0x04 /* FCF discovery started */
+#define FCF_BOOT_ENABLE 0x08 /* Boot bios use this FCF */
+#define FCF_IN_USE 0x10 /* Atleast one discovery completed */
+#define FCF_VALID_VLAN 0x20 /* Use the vlan id specified */
+ uint32_t priority;
+ uint32_t addr_mode;
+ uint16_t vlan_id;
+};
+
+#define LPFC_REGION23_SIGNATURE "RG23"
+#define LPFC_REGION23_VERSION 1
+#define LPFC_REGION23_LAST_REC 0xff
+struct lpfc_fip_param_hdr {
+ uint8_t type;
+#define FCOE_PARAM_TYPE 0xA0
+ uint8_t length;
+#define FCOE_PARAM_LENGTH 2
+ uint8_t parm_version;
+#define FIPP_VERSION 0x01
+ uint8_t parm_flags;
+#define lpfc_fip_param_hdr_fipp_mode_SHIFT 6
+#define lpfc_fip_param_hdr_fipp_mode_MASK 0x3
+#define lpfc_fip_param_hdr_fipp_mode_WORD parm_flags
+#define FIPP_MODE_ON 0x2
+#define FIPP_MODE_OFF 0x0
+#define FIPP_VLAN_VALID 0x1
+};
+
+struct lpfc_fcoe_params {
+ uint8_t fc_map[3];
+ uint8_t reserved1;
+ uint16_t vlan_tag;
+ uint8_t reserved[2];
+};
+
+struct lpfc_fcf_conn_hdr {
+ uint8_t type;
+#define FCOE_CONN_TBL_TYPE 0xA1
+ uint8_t length; /* words */
+ uint8_t reserved[2];
+};
+
+struct lpfc_fcf_conn_rec {
+ uint16_t flags;
+#define FCFCNCT_VALID 0x0001
+#define FCFCNCT_BOOT 0x0002
+#define FCFCNCT_PRIMARY 0x0004 /* if not set, Secondary */
+#define FCFCNCT_FBNM_VALID 0x0008
+#define FCFCNCT_SWNM_VALID 0x0010
+#define FCFCNCT_VLAN_VALID 0x0020
+#define FCFCNCT_AM_VALID 0x0040
+#define FCFCNCT_AM_PREFERRED 0x0080 /* if not set, AM Required */
+#define FCFCNCT_AM_SPMA 0x0100 /* if not set, FPMA */
+
+ uint16_t vlan_tag;
+ uint8_t fabric_name[8];
+ uint8_t switch_name[8];
+};
+
+struct lpfc_fcf_conn_entry {
+ struct list_head list;
+ struct lpfc_fcf_conn_rec conn_rec;
+};
+
+/*
+ * Define the host's bootstrap mailbox. This structure contains
+ * the member attributes needed to create, use, and destroy the
+ * bootstrap mailbox region.
+ *
+ * The macro definitions for the bmbx data structure are defined
+ * in lpfc_hw4.h with the register definition.
+ */
+struct lpfc_bmbx {
+ struct lpfc_dmabuf *dmabuf;
+ struct dma_address dma_address;
+ void *avirt;
+ dma_addr_t aphys;
+ uint32_t bmbx_size;
+};
+
+#define LPFC_EQE_SIZE LPFC_EQE_SIZE_4
+
+#define LPFC_EQE_SIZE_4B 4
+#define LPFC_EQE_SIZE_16B 16
+#define LPFC_CQE_SIZE 16
+#define LPFC_WQE_SIZE 64
+#define LPFC_MQE_SIZE 256
+#define LPFC_RQE_SIZE 8
+
+#define LPFC_EQE_DEF_COUNT 1024
+#define LPFC_CQE_DEF_COUNT 256
+#define LPFC_WQE_DEF_COUNT 64
+#define LPFC_MQE_DEF_COUNT 16
+#define LPFC_RQE_DEF_COUNT 512
+
+#define LPFC_QUEUE_NOARM false
+#define LPFC_QUEUE_REARM true
+
+
+/*
+ * SLI4 CT field defines
+ */
+#define SLI4_CT_RPI 0
+#define SLI4_CT_VPI 1
+#define SLI4_CT_VFI 2
+#define SLI4_CT_FCFI 3
+
+#define LPFC_SLI4_MAX_SEGMENT_SIZE 0x10000
+
+/*
+ * SLI4 specific data structures
+ */
+struct lpfc_max_cfg_param {
+ uint16_t max_xri;
+ uint16_t xri_base;
+ uint16_t xri_used;
+ uint16_t max_rpi;
+ uint16_t rpi_base;
+ uint16_t rpi_used;
+ uint16_t max_vpi;
+ uint16_t vpi_base;
+ uint16_t vpi_used;
+ uint16_t max_vfi;
+ uint16_t vfi_base;
+ uint16_t vfi_used;
+ uint16_t max_fcfi;
+ uint16_t fcfi_base;
+ uint16_t fcfi_used;
+ uint16_t max_eq;
+ uint16_t max_rq;
+ uint16_t max_cq;
+ uint16_t max_wq;
+};
+
+struct lpfc_hba;
+/* SLI4 HBA multi-fcp queue handler struct */
+struct lpfc_fcp_eq_hdl {
+ uint32_t idx;
+ struct lpfc_hba *phba;
+};
+
+/* SLI4 HBA data structure entries */
+struct lpfc_sli4_hba {
+ void __iomem *conf_regs_memmap_p; /* Kernel memory mapped address for
+ PCI BAR0, config space registers */
+ void __iomem *ctrl_regs_memmap_p; /* Kernel memory mapped address for
+ PCI BAR1, control registers */
+ void __iomem *drbl_regs_memmap_p; /* Kernel memory mapped address for
+ PCI BAR2, doorbell registers */
+ /* BAR0 PCI config space register memory map */
+ void __iomem *UERRLOregaddr; /* Address to UERR_STATUS_LO register */
+ void __iomem *UERRHIregaddr; /* Address to UERR_STATUS_HI register */
+ void __iomem *ONLINE0regaddr; /* Address to components of internal UE */
+ void __iomem *ONLINE1regaddr; /* Address to components of internal UE */
+#define LPFC_ONLINE_NERR 0xFFFFFFFF
+ void __iomem *SCRATCHPADregaddr; /* Address to scratchpad register */
+ /* BAR1 FCoE function CSR register memory map */
+ void __iomem *STAregaddr; /* Address to HST_STATE register */
+ void __iomem *ISRregaddr; /* Address to HST_ISR register */
+ void __iomem *IMRregaddr; /* Address to HST_IMR register */
+ void __iomem *ISCRregaddr; /* Address to HST_ISCR register */
+ /* BAR2 VF-0 doorbell register memory map */
+ void __iomem *RQDBregaddr; /* Address to RQ_DOORBELL register */
+ void __iomem *WQDBregaddr; /* Address to WQ_DOORBELL register */
+ void __iomem *EQCQDBregaddr; /* Address to EQCQ_DOORBELL register */
+ void __iomem *MQDBregaddr; /* Address to MQ_DOORBELL register */
+ void __iomem *BMBXregaddr; /* Address to BootStrap MBX register */
+
+ struct msix_entry *msix_entries;
+ uint32_t cfg_eqn;
+ struct lpfc_fcp_eq_hdl *fcp_eq_hdl; /* FCP per-WQ handle */
+ /* Pointers to the constructed SLI4 queues */
+ struct lpfc_queue **fp_eq; /* Fast-path event queue */
+ struct lpfc_queue *sp_eq; /* Slow-path event queue */
+ struct lpfc_queue **fcp_wq;/* Fast-path FCP work queue */
+ struct lpfc_queue *mbx_wq; /* Slow-path MBOX work queue */
+ struct lpfc_queue *els_wq; /* Slow-path ELS work queue */
+ struct lpfc_queue *hdr_rq; /* Slow-path Header Receive queue */
+ struct lpfc_queue *dat_rq; /* Slow-path Data Receive queue */
+ struct lpfc_queue **fcp_cq;/* Fast-path FCP compl queue */
+ struct lpfc_queue *mbx_cq; /* Slow-path mailbox complete queue */
+ struct lpfc_queue *els_cq; /* Slow-path ELS response complete queue */
+ struct lpfc_queue *rxq_cq; /* Slow-path unsolicited complete queue */
+
+ /* Setup information for various queue parameters */
+ int eq_esize;
+ int eq_ecount;
+ int cq_esize;
+ int cq_ecount;
+ int wq_esize;
+ int wq_ecount;
+ int mq_esize;
+ int mq_ecount;
+ int rq_esize;
+ int rq_ecount;
+#define LPFC_SP_EQ_MAX_INTR_SEC 10000
+#define LPFC_FP_EQ_MAX_INTR_SEC 10000
+
+ uint32_t intr_enable;
+ struct lpfc_bmbx bmbx;
+ struct lpfc_max_cfg_param max_cfg_param;
+ uint16_t next_xri; /* last_xri - max_cfg_param.xri_base = used */
+ uint16_t next_rpi;
+ uint16_t scsi_xri_max;
+ uint16_t scsi_xri_cnt;
+ struct list_head lpfc_free_sgl_list;
+ struct list_head lpfc_sgl_list;
+ struct lpfc_sglq **lpfc_els_sgl_array;
+ struct list_head lpfc_abts_els_sgl_list;
+ struct lpfc_scsi_buf **lpfc_scsi_psb_array;
+ struct list_head lpfc_abts_scsi_buf_list;
+ uint32_t total_sglq_bufs;
+ struct lpfc_sglq **lpfc_sglq_active_list;
+ struct list_head lpfc_rpi_hdr_list;
+ unsigned long *rpi_bmask;
+ uint16_t rpi_count;
+ struct lpfc_sli4_flags sli4_flags;
+ struct list_head sp_rspiocb_work_queue;
+ struct list_head sp_cqe_event_pool;
+ struct list_head sp_asynce_work_queue;
+ struct list_head sp_fcp_xri_aborted_work_queue;
+ struct list_head sp_els_xri_aborted_work_queue;
+ struct list_head sp_unsol_work_queue;
+ struct lpfc_sli4_link link_state;
+ spinlock_t abts_scsi_buf_list_lock; /* list of aborted SCSI IOs */
+ spinlock_t abts_sgl_list_lock; /* list of aborted els IOs */
+};
+
+enum lpfc_sge_type {
+ GEN_BUFF_TYPE,
+ SCSI_BUFF_TYPE
+};
+
+struct lpfc_sglq {
+ /* lpfc_sglqs are used in double linked lists */
+ struct list_head list;
+ struct list_head clist;
+ enum lpfc_sge_type buff_type; /* is this a scsi sgl */
+ uint16_t iotag; /* pre-assigned IO tag */
+ uint16_t sli4_xritag; /* pre-assigned XRI, (OXID) tag. */
+ struct sli4_sge *sgl; /* pre-assigned SGL */
+ void *virt; /* virtual address. */
+ dma_addr_t phys; /* physical address */
+};
+
+struct lpfc_rpi_hdr {
+ struct list_head list;
+ uint32_t len;
+ struct lpfc_dmabuf *dmabuf;
+ uint32_t page_count;
+ uint32_t start_rpi;
+};
+
+/*
+ * SLI4 specific function prototypes
+ */
+int lpfc_pci_function_reset(struct lpfc_hba *);
+int lpfc_sli4_hba_setup(struct lpfc_hba *);
+int lpfc_sli4_hba_down(struct lpfc_hba *);
+int lpfc_sli4_config(struct lpfc_hba *, struct lpfcMboxq *, uint8_t,
+ uint8_t, uint32_t, bool);
+void lpfc_sli4_mbox_cmd_free(struct lpfc_hba *, struct lpfcMboxq *);
+void lpfc_sli4_mbx_sge_set(struct lpfcMboxq *, uint32_t, dma_addr_t, uint32_t);
+void lpfc_sli4_mbx_sge_get(struct lpfcMboxq *, uint32_t,
+ struct lpfc_mbx_sge *);
+
+void lpfc_sli4_hba_reset(struct lpfc_hba *);
+struct lpfc_queue *lpfc_sli4_queue_alloc(struct lpfc_hba *, uint32_t,
+ uint32_t);
+void lpfc_sli4_queue_free(struct lpfc_queue *);
+uint32_t lpfc_eq_create(struct lpfc_hba *, struct lpfc_queue *, uint16_t);
+uint32_t lpfc_cq_create(struct lpfc_hba *, struct lpfc_queue *,
+ struct lpfc_queue *, uint32_t, uint32_t);
+uint32_t lpfc_mq_create(struct lpfc_hba *, struct lpfc_queue *,
+ struct lpfc_queue *, uint32_t);
+uint32_t lpfc_wq_create(struct lpfc_hba *, struct lpfc_queue *,
+ struct lpfc_queue *, uint32_t);
+uint32_t lpfc_rq_create(struct lpfc_hba *, struct lpfc_queue *,
+ struct lpfc_queue *, struct lpfc_queue *, uint32_t);
+uint32_t lpfc_eq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_cq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_mq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_wq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_rq_destroy(struct lpfc_hba *, struct lpfc_queue *,
+ struct lpfc_queue *);
+int lpfc_sli4_queue_setup(struct lpfc_hba *);
+void lpfc_sli4_queue_unset(struct lpfc_hba *);
+int lpfc_sli4_post_sgl(struct lpfc_hba *, dma_addr_t, dma_addr_t, uint16_t);
+int lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *);
+int lpfc_sli4_remove_all_sgl_pages(struct lpfc_hba *);
+uint16_t lpfc_sli4_next_xritag(struct lpfc_hba *);
+int lpfc_sli4_post_async_mbox(struct lpfc_hba *);
+int lpfc_sli4_post_sgl_list(struct lpfc_hba *phba);
+int lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *, struct list_head *, int);
+struct lpfc_cq_event *__lpfc_sli4_cq_event_alloc(struct lpfc_hba *);
+struct lpfc_cq_event *lpfc_sli4_cq_event_alloc(struct lpfc_hba *);
+void __lpfc_sli4_cq_event_release(struct lpfc_hba *, struct lpfc_cq_event *);
+void lpfc_sli4_cq_event_release(struct lpfc_hba *, struct lpfc_cq_event *);
+int lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *);
+int lpfc_sli4_post_rpi_hdr(struct lpfc_hba *, struct lpfc_rpi_hdr *);
+int lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *);
+struct lpfc_rpi_hdr *lpfc_sli4_create_rpi_hdr(struct lpfc_hba *);
+void lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *);
+int lpfc_sli4_alloc_rpi(struct lpfc_hba *);
+void lpfc_sli4_free_rpi(struct lpfc_hba *, int);
+void lpfc_sli4_remove_rpis(struct lpfc_hba *);
+void lpfc_sli4_async_event_proc(struct lpfc_hba *);
+int lpfc_sli4_resume_rpi(struct lpfc_nodelist *);
+void lpfc_sli4_fcp_xri_abort_event_proc(struct lpfc_hba *);
+void lpfc_sli4_els_xri_abort_event_proc(struct lpfc_hba *);
+void lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *,
+ struct sli4_wcqe_xri_aborted *);
+void lpfc_sli4_els_xri_aborted(struct lpfc_hba *,
+ struct sli4_wcqe_xri_aborted *);
+int lpfc_sli4_brdreset(struct lpfc_hba *);
+int lpfc_sli4_add_fcf_record(struct lpfc_hba *, struct fcf_record *);
+void lpfc_sli_remove_dflt_fcf(struct lpfc_hba *);
+int lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *);
+int lpfc_sli4_init_vpi(struct lpfc_hba *, uint16_t);
+uint32_t lpfc_sli4_cq_release(struct lpfc_queue *, bool);
+uint32_t lpfc_sli4_eq_release(struct lpfc_queue *, bool);
+void lpfc_sli4_fcfi_unreg(struct lpfc_hba *, uint16_t);
+int lpfc_sli4_read_fcf_record(struct lpfc_hba *, uint16_t);
+void lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_sli4_post_status_check(struct lpfc_hba *);
+uint8_t lpfc_sli4_mbox_opcode_get(struct lpfc_hba *, struct lpfcMboxq *);
+
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index e599519..6b8a148 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "8.3.1"
+#define LPFC_DRIVER_VERSION "8.3.2"
#define LPFC_DRIVER_NAME "lpfc"
#define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp"
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index 917ad56..a6313ee 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -32,8 +32,10 @@
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -89,6 +91,8 @@ lpfc_alloc_vpi(struct lpfc_hba *phba)
vpi = 0;
else
set_bit(vpi, phba->vpi_bmask);
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ phba->sli4_hba.max_cfg_param.vpi_used++;
spin_unlock_irq(&phba->hbalock);
return vpi;
}
@@ -96,8 +100,12 @@ lpfc_alloc_vpi(struct lpfc_hba *phba)
static void
lpfc_free_vpi(struct lpfc_hba *phba, int vpi)
{
+ if (vpi == 0)
+ return;
spin_lock_irq(&phba->hbalock);
clear_bit(vpi, phba->vpi_bmask);
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ phba->sli4_hba.max_cfg_param.vpi_used--;
spin_unlock_irq(&phba->hbalock);
}
@@ -113,7 +121,7 @@ lpfc_vport_sparm(struct lpfc_hba *phba, struct lpfc_vport *vport)
if (!pmb) {
return -ENOMEM;
}
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
lpfc_read_sparam(phba, pmb, vport->vpi);
/*
@@ -243,23 +251,22 @@ static void lpfc_discovery_wait(struct lpfc_vport *vport)
(vport->fc_flag & wait_flags) ||
((vport->port_state > LPFC_VPORT_FAILED) &&
(vport->port_state < LPFC_VPORT_READY))) {
- lpfc_printf_log(phba, KERN_INFO, LOG_VPORT,
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT,
"1833 Vport discovery quiesce Wait:"
- " vpi x%x state x%x fc_flags x%x"
+ " state x%x fc_flags x%x"
" num_nodes x%x, waiting 1000 msecs"
" total wait msecs x%x\n",
- vport->vpi, vport->port_state,
- vport->fc_flag, vport->num_disc_nodes,
+ vport->port_state, vport->fc_flag,
+ vport->num_disc_nodes,
jiffies_to_msecs(jiffies - start_time));
msleep(1000);
} else {
/* Base case. Wait variants satisfied. Break out */
- lpfc_printf_log(phba, KERN_INFO, LOG_VPORT,
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT,
"1834 Vport discovery quiesced:"
- " vpi x%x state x%x fc_flags x%x"
+ " state x%x fc_flags x%x"
" wait msecs x%x\n",
- vport->vpi, vport->port_state,
- vport->fc_flag,
+ vport->port_state, vport->fc_flag,
jiffies_to_msecs(jiffies
- start_time));
break;
@@ -267,12 +274,10 @@ static void lpfc_discovery_wait(struct lpfc_vport *vport)
}
if (time_after(jiffies, wait_time_max))
- lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
"1835 Vport discovery quiesce failed:"
- " vpi x%x state x%x fc_flags x%x"
- " wait msecs x%x\n",
- vport->vpi, vport->port_state,
- vport->fc_flag,
+ " state x%x fc_flags x%x wait msecs x%x\n",
+ vport->port_state, vport->fc_flag,
jiffies_to_msecs(jiffies - start_time));
}
@@ -308,6 +313,21 @@ lpfc_vport_create(struct fc_vport *fc_vport, bool disable)
goto error_out;
}
+ /*
+ * In SLI4, the vpi must be activated before it can be used
+ * by the port.
+ */
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ rc = lpfc_sli4_init_vpi(phba, vpi);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
+ "1838 Failed to INIT_VPI on vpi %d "
+ "status %d\n", vpi, rc);
+ rc = VPORT_NORESOURCES;
+ lpfc_free_vpi(phba, vpi);
+ goto error_out;
+ }
+ }
/* Assign an unused board number */
if ((instance = lpfc_get_instance()) < 0) {
@@ -535,6 +555,16 @@ lpfc_vport_delete(struct fc_vport *fc_vport)
"physical host\n");
return VPORT_ERROR;
}
+
+ /* If the vport is a static vport fail the deletion. */
+ if ((vport->vport_flag & STATIC_VPORT) &&
+ !(phba->pport->load_flag & FC_UNLOADING)) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
+ "1837 vport_delete failed: Cannot delete "
+ "static vport.\n");
+ return VPORT_ERROR;
+ }
+
/*
* If we are not unloading the driver then prevent the vport_delete
* from happening until after this vport's discovery is finished.
@@ -710,7 +740,7 @@ lpfc_create_vport_work_array(struct lpfc_hba *phba)
struct lpfc_vport *port_iterator;
struct lpfc_vport **vports;
int index = 0;
- vports = kzalloc((phba->max_vpi + 1) * sizeof(struct lpfc_vport *),
+ vports = kzalloc((phba->max_vports + 1) * sizeof(struct lpfc_vport *),
GFP_KERNEL);
if (vports == NULL)
return NULL;
@@ -734,7 +764,7 @@ lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports)
int i;
if (vports == NULL)
return;
- for (i=0; vports[i] != NULL && i <= phba->max_vpi; i++)
+ for (i = 0; vports[i] != NULL && i <= phba->max_vports; i++)
scsi_host_put(lpfc_shost_from_vport(vports[i]));
kfree(vports);
}
OpenPOWER on IntegriCloud