diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_attr.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_attr.c | 57 |
1 files changed, 23 insertions, 34 deletions
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 5cb08ae..22f42f8 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -674,9 +674,6 @@ lpfc_do_offline(struct lpfc_hba *phba, uint32_t type) int i; int rc; - if (phba->pport->fc_flag & FC_OFFLINE_MODE) - return 0; - init_completion(&online_compl); rc = lpfc_workq_post_event(phba, &status, &online_compl, LPFC_EVT_OFFLINE_PREP); @@ -744,14 +741,15 @@ lpfc_selective_reset(struct lpfc_hba *phba) int status = 0; int rc; - if ((!phba->cfg_enable_hba_reset) || - (phba->pport->fc_flag & FC_OFFLINE_MODE)) + if (!phba->cfg_enable_hba_reset) return -EACCES; - status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); + if (!(phba->pport->fc_flag & FC_OFFLINE_MODE)) { + status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); - if (status != 0) - return status; + if (status != 0) + return status; + } init_completion(&online_compl); rc = lpfc_workq_post_event(phba, &status, &online_compl, @@ -2591,9 +2589,12 @@ LPFC_VPORT_ATTR_R(enable_da_id, 1, 0, 1, /* # lun_queue_depth: This parameter is used to limit the number of outstanding -# commands per FCP LUN. Value range is [1,128]. Default value is 30. +# commands per FCP LUN. Value range is [1,512]. Default value is 30. +# If this parameter value is greater than 1/8th the maximum number of exchanges +# supported by the HBA port, then the lun queue depth will be reduced to +# 1/8th the maximum number of exchanges. */ -LPFC_VPORT_ATTR_R(lun_queue_depth, 30, 1, 128, +LPFC_VPORT_ATTR_R(lun_queue_depth, 30, 1, 512, "Max number of FCP commands we can queue to a specific LUN"); /* @@ -2601,7 +2602,7 @@ LPFC_VPORT_ATTR_R(lun_queue_depth, 30, 1, 128, # commands per target port. Value range is [10,65535]. Default value is 65535. */ LPFC_VPORT_ATTR_R(tgt_queue_depth, 65535, 10, 65535, - "Max number of FCP commands we can queue to a specific target port"); + "Max number of FCP commands we can queue to a specific target port"); /* # hba_queue_depth: This parameter is used to limit the number of outstanding @@ -3949,6 +3950,14 @@ LPFC_VPORT_ATTR_RW(use_adisc, 0, 0, 1, "Use ADISC on rediscovery to authenticate FCP devices"); /* +# lpfc_first_burst_size: First burst size to use on the NPorts +# that support first burst. +# Value range is [0,65536]. Default value is 0. +*/ +LPFC_VPORT_ATTR_RW(first_burst_size, 0, 0, 65536, + "First burst size for Targets that support first burst"); + +/* # lpfc_max_scsicmpl_time: Use scsi command completion time to control I/O queue # depth. Default value is 0. When the value of this parameter is zero the # SCSI command completion time is not used for controlling I/O queue depth. When @@ -4112,25 +4121,6 @@ LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Message Signaled Interrupts (1) or " "MSI-X (2), if possible"); /* -# lpfc_fcp_wq_count: Set the number of fast-path FCP work queues -# This parameter is ignored and will eventually be depricated -# -# Value range is [1,7]. Default value is 4. -*/ -LPFC_ATTR_R(fcp_wq_count, LPFC_FCP_IO_CHAN_DEF, LPFC_FCP_IO_CHAN_MIN, - LPFC_FCP_IO_CHAN_MAX, - "Set the number of fast-path FCP work queues, if possible"); - -/* -# lpfc_fcp_eq_count: Set the number of FCP EQ/CQ/WQ IO channels -# -# Value range is [1,7]. Default value is 4. -*/ -LPFC_ATTR_R(fcp_eq_count, LPFC_FCP_IO_CHAN_DEF, LPFC_FCP_IO_CHAN_MIN, - LPFC_FCP_IO_CHAN_MAX, - "Set the number of fast-path FCP event queues, if possible"); - -/* # lpfc_fcp_io_channel: Set the number of FCP EQ/CQ/WQ IO channels # # Value range is [1,7]. Default value is 4. @@ -4276,6 +4266,7 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_devloss_tmo, &dev_attr_lpfc_fcp_class, &dev_attr_lpfc_use_adisc, + &dev_attr_lpfc_first_burst_size, &dev_attr_lpfc_ack0, &dev_attr_lpfc_topology, &dev_attr_lpfc_scan_down, @@ -4307,8 +4298,6 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_use_msi, &dev_attr_lpfc_fcp_imax, &dev_attr_lpfc_fcp_cpu_map, - &dev_attr_lpfc_fcp_wq_count, - &dev_attr_lpfc_fcp_eq_count, &dev_attr_lpfc_fcp_io_channel, &dev_attr_lpfc_enable_bg, &dev_attr_lpfc_soft_wwnn, @@ -4352,6 +4341,7 @@ struct device_attribute *lpfc_vport_attrs[] = { &dev_attr_lpfc_restrict_login, &dev_attr_lpfc_fcp_class, &dev_attr_lpfc_use_adisc, + &dev_attr_lpfc_first_burst_size, &dev_attr_lpfc_fdmi_on, &dev_attr_lpfc_max_luns, &dev_attr_nport_evt_cnt, @@ -5290,8 +5280,6 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) lpfc_use_msi_init(phba, lpfc_use_msi); lpfc_fcp_imax_init(phba, lpfc_fcp_imax); lpfc_fcp_cpu_map_init(phba, lpfc_fcp_cpu_map); - lpfc_fcp_wq_count_init(phba, lpfc_fcp_wq_count); - lpfc_fcp_eq_count_init(phba, lpfc_fcp_eq_count); lpfc_fcp_io_channel_init(phba, lpfc_fcp_io_channel); lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset); lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat); @@ -5331,6 +5319,7 @@ lpfc_get_vport_cfgparam(struct lpfc_vport *vport) lpfc_restrict_login_init(vport, lpfc_restrict_login); lpfc_fcp_class_init(vport, lpfc_fcp_class); lpfc_use_adisc_init(vport, lpfc_use_adisc); + lpfc_first_burst_size_init(vport, lpfc_first_burst_size); lpfc_max_scsicmpl_time_init(vport, lpfc_max_scsicmpl_time); lpfc_fdmi_on_init(vport, lpfc_fdmi_on); lpfc_discovery_threads_init(vport, lpfc_discovery_threads); |
