diff options
Diffstat (limited to 'drivers/scsi/libfc/fc_rport.c')
| -rw-r--r-- | drivers/scsi/libfc/fc_rport.c | 1291 |
1 files changed, 1291 insertions, 0 deletions
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c new file mode 100644 index 0000000..e780d8c --- /dev/null +++ b/drivers/scsi/libfc/fc_rport.c @@ -0,0 +1,1291 @@ +/* + * Copyright(c) 2007 - 2008 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +/* + * RPORT GENERAL INFO + * + * This file contains all processing regarding fc_rports. It contains the + * rport state machine and does all rport interaction with the transport class. + * There should be no other places in libfc that interact directly with the + * transport class in regards to adding and deleting rports. + * + * fc_rport's represent N_Port's within the fabric. + */ + +/* + * RPORT LOCKING + * + * The rport should never hold the rport mutex and then attempt to acquire + * either the lport or disc mutexes. The rport's mutex is considered lesser + * than both the lport's mutex and the disc mutex. Refer to fc_lport.c for + * more comments on the heirarchy. + * + * The locking strategy is similar to the lport's strategy. The lock protects + * the rport's states and is held and released by the entry points to the rport + * block. All _enter_* functions correspond to rport states and expect the rport + * mutex to be locked before calling them. This means that rports only handle + * one request or response at a time, since they're not critical for the I/O + * path this potential over-use of the mutex is acceptable. + */ + +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/rcupdate.h> +#include <linux/timer.h> +#include <linux/workqueue.h> +#include <asm/unaligned.h> + +#include <scsi/libfc.h> +#include <scsi/fc_encode.h> + +static int fc_rport_debug; + +#define FC_DEBUG_RPORT(fmt...) \ + do { \ + if (fc_rport_debug) \ + FC_DBG(fmt); \ + } while (0) + +struct workqueue_struct *rport_event_queue; + +static void fc_rport_enter_plogi(struct fc_rport *); +static void fc_rport_enter_prli(struct fc_rport *); +static void fc_rport_enter_rtv(struct fc_rport *); +static void fc_rport_enter_ready(struct fc_rport *); +static void fc_rport_enter_logo(struct fc_rport *); + +static void fc_rport_recv_plogi_req(struct fc_rport *, + struct fc_seq *, struct fc_frame *); +static void fc_rport_recv_prli_req(struct fc_rport *, + struct fc_seq *, struct fc_frame *); +static void fc_rport_recv_prlo_req(struct fc_rport *, + struct fc_seq *, struct fc_frame *); +static void fc_rport_recv_logo_req(struct fc_rport *, + struct fc_seq *, struct fc_frame *); +static void fc_rport_timeout(struct work_struct *); +static void fc_rport_error(struct fc_rport *, struct fc_frame *); +static void fc_rport_work(struct work_struct *); + +static const char *fc_rport_state_names[] = { + [RPORT_ST_NONE] = "None", + [RPORT_ST_INIT] = "Init", + [RPORT_ST_PLOGI] = "PLOGI", + [RPORT_ST_PRLI] = "PRLI", + [RPORT_ST_RTV] = "RTV", + [RPORT_ST_READY] = "Ready", + [RPORT_ST_LOGO] = "LOGO", +}; + +static void fc_rport_rogue_destroy(struct device *dev) +{ + struct fc_rport *rport = dev_to_rport(dev); + FC_DEBUG_RPORT("Destroying rogue rport (%6x)\n", rport->port_id); + kfree(rport); +} + +struct fc_rport *fc_rport_rogue_create(struct fc_disc_port *dp) +{ + struct fc_rport *rport; + struct fc_rport_libfc_priv *rdata; + rport = kzalloc(sizeof(*rport) + sizeof(*rdata), GFP_KERNEL); + + if (!rport) + return NULL; + + rdata = RPORT_TO_PRIV(rport); + + rport->dd_data = rdata; + rport->port_id = dp->ids.port_id; + rport->port_name = dp->ids.port_name; + rport->node_name = dp->ids.node_name; + rport->roles = dp->ids.roles; + rport->maxframe_size = FC_MIN_MAX_PAYLOAD; + /* + * Note: all this libfc rogue rport code will be removed for + * upstream so it fine that this is really ugly and hacky right now. + */ + device_initialize(&rport->dev); + rport->dev.release = fc_rport_rogue_destroy; + + mutex_init(&rdata->rp_mutex); + rdata->local_port = dp->lp; + rdata->trans_state = FC_PORTSTATE_ROGUE; + rdata->rp_state = RPORT_ST_INIT; + rdata->event = RPORT_EV_NONE; + rdata->flags = FC_RP_FLAGS_REC_SUPPORTED; + rdata->ops = NULL; + rdata->e_d_tov = dp->lp->e_d_tov; + rdata->r_a_tov = dp->lp->r_a_tov; + INIT_DELAYED_WORK(&rdata->retry_work, fc_rport_timeout); + INIT_WORK(&rdata->event_work, fc_rport_work); + /* + * For good measure, but not necessary as we should only + * add REAL rport to the lport list. + */ + INIT_LIST_HEAD(&rdata->peers); + + return rport; +} + +/** + * fc_rport_state - return a string for the state the rport is in + * @rport: The rport whose state we want to get a string for + */ +static const char *fc_rport_state(struct fc_rport *rport) +{ + const char *cp; + struct fc_rport_libfc_priv *rdata = rport->dd_data; + + cp = fc_rport_state_names[rdata->rp_state]; + if (!cp) + cp = "Unknown"; + return cp; +} + +/** + * fc_set_rport_loss_tmo - Set the remote port loss timeout in seconds. + * @rport: Pointer to Fibre Channel remote port structure + * @timeout: timeout in seconds + */ +void fc_set_rport_loss_tmo(struct fc_rport *rport, u32 timeout) +{ + if (timeout) + rport->dev_loss_tmo = timeout + 5; + else + rport->dev_loss_tmo = 30; +} +EXPORT_SYMBOL(fc_set_rport_loss_tmo); + +/** + * fc_plogi_get_maxframe - Get max payload from the common service parameters + * @flp: FLOGI payload structure + * @maxval: upper limit, may be less than what is in the service parameters + */ +static unsigned int +fc_plogi_get_maxframe(struct fc_els_flogi *flp, unsigned int maxval) +{ + unsigned int mfs; + + /* + * Get max payload from the common service parameters and the + * class 3 receive data field size. + */ + mfs = ntohs(flp->fl_csp.sp_bb_data) & FC_SP_BB_DATA_MASK; + if (mfs >= FC_SP_MIN_MAX_PAYLOAD && mfs < maxval) + maxval = mfs; + mfs = ntohs(flp->fl_cssp[3 - 1].cp_rdfs); + if (mfs >= FC_SP_MIN_MAX_PAYLOAD && mfs < maxval) + maxval = mfs; + return maxval; +} + +/** + * fc_rport_state_enter - Change the rport's state + * @rport: The rport whose state should change + * @new: The new state of the rport + * + * Locking Note: Called with the rport lock held + */ +static void fc_rport_state_enter(struct fc_rport *rport, + enum fc_rport_state new) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + if (rdata->rp_state != new) + rdata->retries = 0; + rdata->rp_state = new; +} + +static void fc_rport_work(struct work_struct *work) +{ + struct fc_rport_libfc_priv *rdata = + container_of(work, struct fc_rport_libfc_priv, event_work); + enum fc_rport_event event; + enum fc_rport_trans_state trans_state; + struct fc_lport *lport = rdata->local_port; + struct fc_rport_operations *rport_ops; + struct fc_rport *rport = PRIV_TO_RPORT(rdata); + + mutex_lock(&rdata->rp_mutex); + event = rdata->event; + rport_ops = rdata->ops; + + if (event == RPORT_EV_CREATED) { + struct fc_rport *new_rport; + struct fc_rport_libfc_priv *new_rdata; + struct fc_rport_identifiers ids; + + ids.port_id = rport->port_id; + ids.roles = rport->roles; + ids.port_name = rport->port_name; + ids.node_name = rport->node_name; + + mutex_unlock(&rdata->rp_mutex); + + new_rport = fc_remote_port_add(lport->host, 0, &ids); + if (new_rport) { + /* + * Switch from the rogue rport to the rport + * returned by the FC class. + */ + new_rport->maxframe_size = rport->maxframe_size; + + new_rdata = new_rport->dd_data; + new_rdata->e_d_tov = rdata->e_d_tov; + new_rdata->r_a_tov = rdata->r_a_tov; + new_rdata->ops = rdata->ops; + new_rdata->local_port = rdata->local_port; + new_rdata->flags = FC_RP_FLAGS_REC_SUPPORTED; + new_rdata->trans_state = FC_PORTSTATE_REAL; + mutex_init(&new_rdata->rp_mutex); + INIT_DELAYED_WORK(&new_rdata->retry_work, + fc_rport_timeout); + INIT_LIST_HEAD(&new_rdata->peers); + INIT_WORK(&new_rdata->event_work, fc_rport_work); + + fc_rport_state_enter(new_rport, RPORT_ST_READY); + } else { + FC_DBG("Failed to create the rport for port " + "(%6x).\n", ids.port_id); + event = RPORT_EV_FAILED; + } + put_device(&rport->dev); + rport = new_rport; + rdata = new_rport->dd_data; + if (rport_ops->event_callback) + rport_ops->event_callback(lport, rport, event); + } else if ((event == RPORT_EV_FAILED) || + (event == RPORT_EV_LOGO) || + (event == RPORT_EV_STOP)) { + trans_state = rdata->trans_state; + mutex_unlock(&rdata->rp_mutex); + if (rport_ops->event_callback) + rport_ops->event_callback(lport, rport, event); + if (trans_state == FC_PORTSTATE_ROGUE) + put_device(&rport->dev); + else + fc_remote_port_delete(rport); + } else + mutex_unlock(&rdata->rp_mutex); +} + +/** + * fc_rport_login - Start the remote port login state machine + * @rport: Fibre Channel remote port + * + * Locking Note: Called without the rport lock held. This + * function will hold the rport lock, call an _enter_* + * function and then unlock the rport. + */ +int fc_rport_login(struct fc_rport *rport) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + + mutex_lock(&rdata->rp_mutex); + + FC_DEBUG_RPORT("Login to port (%6x)\n", rport->port_id); + + fc_rport_enter_plogi(rport); + + mutex_unlock(&rdata->rp_mutex); + + return 0; +} + +/** + * fc_rport_logoff - Logoff and remove an rport + * @rport: Fibre Channel remote port to be removed + * + * Locking Note: Called without the rport lock held. This + * function will hold the rport lock, call an _enter_* + * function and then unlock the rport. + */ +int fc_rport_logoff(struct fc_rport *rport) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + + mutex_lock(&rdata->rp_mutex); + + FC_DEBUG_RPORT("Remove port (%6x)\n", rport->port_id); + + fc_rport_enter_logo(rport); + + /* + * Change the state to NONE so that we discard + * the response. + */ + fc_rport_state_enter(rport, RPORT_ST_NONE); + + mutex_unlock(&rdata->rp_mutex); + + cancel_delayed_work_sync(&rdata->retry_work); + + mutex_lock(&rdata->rp_mutex); + + rdata->event = RPORT_EV_STOP; + queue_work(rport_event_queue, &rdata->event_work); + + mutex_unlock(&rdata->rp_mutex); + + return 0; +} + +/** + * fc_rport_enter_ready - The rport is ready + * @rport: Fibre Channel remote port that is ready + * + * Locking Note: The rport lock is expected to be held before calling + * this routine. + */ +static void fc_rport_enter_ready(struct fc_rport *rport) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + + fc_rport_state_enter(rport, RPORT_ST_READY); + + FC_DEBUG_RPORT("Port (%6x) is Ready\n", rport->port_id); + + rdata->event = RPORT_EV_CREATED; + queue_work(rport_event_queue, &rdata->event_work); +} + +/** + * fc_rport_timeout - Handler for the retry_work timer. + * @work: The work struct of the fc_rport_libfc_priv + * + * Locking Note: Called without the rport lock held. This + * function will hold the rport lock, call an _enter_* + * function and then unlock the rport. + */ +static void fc_rport_timeout(struct work_struct *work) +{ + struct fc_rport_libfc_priv *rdata = + container_of(work, struct fc_rport_libfc_priv, retry_work.work); + struct fc_rport *rport = PRIV_TO_RPORT(rdata); + + mutex_lock(&rdata->rp_mutex); + + switch (rdata->rp_state) { + case RPORT_ST_PLOGI: + fc_rport_enter_plogi(rport); + break; + case RPORT_ST_PRLI: + fc_rport_enter_prli(rport); + break; + case RPORT_ST_RTV: + fc_rport_enter_rtv(rport); + break; + case RPORT_ST_LOGO: + fc_rport_enter_logo(rport); + break; + case RPORT_ST_READY: + case RPORT_ST_INIT: + case RPORT_ST_NONE: + break; + } + + mutex_unlock(&rdata->rp_mutex); + put_device(&rport->dev); +} + +/** + * fc_rport_error - Handler for any errors + * @rport: The fc_rport object + * @fp: The frame pointer + * + * If the error was caused by a resource allocation failure + * then wait for half a second and retry, otherwise retry + * immediately. + * + * Locking Note: The rport lock is expected to be held before + * calling this routine + */ +static void fc_rport_error(struct fc_rport *rport, struct fc_frame *fp) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + unsigned long delay = 0; + + FC_DEBUG_RPORT("Error %ld in state %s, retries %d\n", + PTR_ERR(fp), fc_rport_state(rport), rdata->retries); + + if (!fp || PTR_ERR(fp) == -FC_EX_TIMEOUT) { + /* + * Memory allocation failure, or the exchange timed out. + * Retry after delay + */ + if (rdata->retries < rdata->local_port->max_retry_count) { + rdata->retries++; + if (!fp) + delay = msecs_to_jiffies(500); + get_device(&rport->dev); + schedule_delayed_work(&rdata->retry_work, delay); + } else { + switch (rdata->rp_state) { + case RPORT_ST_PLOGI: + case RPORT_ST_PRLI: + case RPORT_ST_LOGO: + rdata->event = RPORT_EV_FAILED; + queue_work(rport_event_queue, + &rdata->event_work); + break; + case RPORT_ST_RTV: + fc_rport_enter_ready(rport); + break; + case RPORT_ST_NONE: + case RPORT_ST_READY: + case RPORT_ST_INIT: + break; + } + } + } +} + +/** + * fc_rport_plogi_recv_resp - Handle incoming ELS PLOGI response + * @sp: current sequence in the PLOGI exchange + * @fp: response frame + * @rp_arg: Fibre Channel remote port + * + * Locking Note: This function will be called without the rport lock + * held, but it will lock, call an _enter_* function or fc_rport_error + * and then unlock the rport. + */ +static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp, + void *rp_arg) +{ + struct fc_rport *rport = rp_arg; + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + struct fc_els_flogi *plp; + unsigned int tov; + u16 csp_seq; + u16 cssp_seq; + u8 op; + + mutex_lock(&rdata->rp_mutex); + + FC_DEBUG_RPORT("Received a PLOGI response from port (%6x)\n", + rport->port_id); + + if (rdata->rp_state != RPORT_ST_PLOGI) { + FC_DBG("Received a PLOGI response, but in state %s\n", + fc_rport_state(rport)); + goto out; + } + + if (IS_ERR(fp)) { + fc_rport_error(rport, fp); + goto err; + } + + op = fc_frame_payload_op(fp); + if (op == ELS_LS_ACC && + (plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) { + rport->port_name = get_unaligned_be64(&plp->fl_wwpn); + rport->node_name = get_unaligned_be64(&plp->fl_wwnn); + + tov = ntohl(plp->fl_csp.sp_e_d_tov); + if (ntohs(plp->fl_csp.sp_features) & FC_SP_FT_EDTR) + tov /= 1000; + if (tov > rdata->e_d_tov) + rdata->e_d_tov = tov; + csp_seq = ntohs(plp->fl_csp.sp_tot_seq); + cssp_seq = ntohs(plp->fl_cssp[3 - 1].cp_con_seq); + if (cssp_seq < csp_seq) + csp_seq = cssp_seq; + rdata->max_seq = csp_seq; + rport->maxframe_size = + fc_plogi_get_maxframe(plp, lport->mfs); + + /* + * If the rport is one of the well known addresses + * we skip PRLI and RTV and go straight to READY. + */ + if (rport->port_id >= FC_FID_DOM_MGR) + fc_rport_enter_ready(rport); + else + fc_rport_enter_prli(rport); + } else + fc_rport_error(rport, fp); + +out: + fc_frame_free(fp); +err: + mutex_unlock(&rdata->rp_mutex); + put_device(&rport->dev); +} + +/** + * fc_rport_enter_plogi - Send Port Login (PLOGI) request to peer + * @rport: Fibre Channel remote port to send PLOGI to + * + * Locking Note: The rport lock is expected to be held before calling + * this routine. + */ +static void fc_rport_enter_plogi(struct fc_rport *rport) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + struct fc_frame *fp; + + FC_DEBUG_RPORT("Port (%6x) entered PLOGI state from %s state\n", + rport->port_id, fc_rport_state(rport)); + + fc_rport_state_enter(rport, RPORT_ST_PLOGI); + + rport->maxframe_size = FC_MIN_MAX_PAYLOAD; + fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi)); + if (!fp) { + fc_rport_error(rport, fp); + return; + } + rdata->e_d_tov = lport->e_d_tov; + + if (!lport->tt.elsct_send(lport, rport, fp, ELS_PLOGI, + fc_rport_plogi_resp, rport, lport->e_d_tov)) + fc_rport_error(rport, fp); + else + get_device(&rport->dev); +} + +/** + * fc_rport_prli_resp - Process Login (PRLI) response handler + * @sp: current sequence in the PRLI exchange + * @fp: response frame + * @rp_arg: Fibre Channel remote port + * + * Locking Note: This function will be called without the rport lock + * held, but it will lock, call an _enter_* function or fc_rport_error + * and then unlock the rport. + */ +static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp, + void *rp_arg) +{ + struct fc_rport *rport = rp_arg; + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct { + struct fc_els_prli prli; + struct fc_els_spp spp; + } *pp; + u32 roles = FC_RPORT_ROLE_UNKNOWN; + u32 fcp_parm = 0; + u8 op; + + mutex_lock(&rdata->rp_mutex); + + FC_DEBUG_RPORT("Received a PRLI response from port (%6x)\n", + rport->port_id); + + if (rdata->rp_state != RPORT_ST_PRLI) { + FC_DBG("Received a PRLI response, but in state %s\n", + fc_rport_state(rport)); + goto out; + } + + if (IS_ERR(fp)) { + fc_rport_error(rport, fp); + goto err; + } + + op = fc_frame_payload_op(fp); + if (op == ELS_LS_ACC) { + pp = fc_frame_payload_get(fp, sizeof(*pp)); + if (pp && pp->prli.prli_spp_len >= sizeof(pp->spp)) { + fcp_parm = ntohl(pp->spp.spp_params); + if (fcp_parm & FCP_SPPF_RETRY) + rdata->flags |= FC_RP_FLAGS_RETRY; + } + + rport->supported_classes = FC_COS_CLASS3; + if (fcp_parm & FCP_SPPF_INIT_FCN) + roles |= FC_RPORT_ROLE_FCP_INITIATOR; + if (fcp_parm & FCP_SPPF_TARG_FCN) + roles |= FC_RPORT_ROLE_FCP_TARGET; + + rport->roles = roles; + fc_rport_enter_rtv(rport); + + } else { + FC_DBG("Bad ELS response\n"); + rdata->event = RPORT_EV_FAILED; + queue_work(rport_event_queue, &rdata->event_work); + } + +out: + fc_frame_free(fp); +err: + mutex_unlock(&rdata->rp_mutex); + put_device(&rport->dev); +} + +/** + * fc_rport_logo_resp - Logout (LOGO) response handler + * @sp: current sequence in the LOGO exchange + * @fp: response frame + * @rp_arg: Fibre Channel remote port + * + * Locking Note: This function will be called without the rport lock + * held, but it will lock, call an _enter_* function or fc_rport_error + * and then unlock the rport. + */ +static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp, + void *rp_arg) +{ + struct fc_rport *rport = rp_arg; + struct fc_rport_libfc_priv *rdata = rport->dd_data; + u8 op; + + mutex_lock(&rdata->rp_mutex); + + FC_DEBUG_RPORT("Received a LOGO response from port (%6x)\n", + rport->port_id); + + if (IS_ERR(fp)) { + fc_rport_error(rport, fp); + goto err; + } + + if (rdata->rp_state != RPORT_ST_LOGO) { + FC_DEBUG_RPORT("Received a LOGO response, but in state %s\n", + fc_rport_state(rport)); + goto out; + } + + op = fc_frame_payload_op(fp); + if (op == ELS_LS_ACC) { + fc_rport_enter_rtv(rport); + } else { + FC_DBG("Bad ELS response\n"); + rdata->event = RPORT_EV_LOGO; + queue_work(rport_event_queue, &rdata->event_work); + } + +out: + fc_frame_free(fp); +err: + mutex_unlock(&rdata->rp_mutex); + put_device(&rport->dev); +} + +/** + * fc_rport_enter_prli - Send Process Login (PRLI) request to peer + * @rport: Fibre Channel remote port to send PRLI to + * + * Locking Note: The rport lock is expected to be held before calling + * this routine. + */ +static void fc_rport_enter_prli(struct fc_rport *rport) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + struct { + struct fc_els_prli prli; + struct fc_els_spp spp; + } *pp; + struct fc_frame *fp; + + FC_DEBUG_RPORT("Port (%6x) entered PRLI state from %s state\n", + rport->port_id, fc_rport_state(rport)); + + fc_rport_state_enter(rport, RPORT_ST_PRLI); + + fp = fc_frame_alloc(lport, sizeof(*pp)); + if (!fp) { + fc_rport_error(rport, fp); + return; + } + + if (!lport->tt.elsct_send(lport, rport, fp, ELS_PRLI, + fc_rport_prli_resp, rport, lport->e_d_tov)) + fc_rport_error(rport, fp); + else + get_device(&rport->dev); +} + +/** + * fc_rport_els_rtv_resp - Request Timeout Value response handler + * @sp: current sequence in the RTV exchange + * @fp: response frame + * @rp_arg: Fibre Channel remote port + * + * Many targets don't seem to support this. + * + * Locking Note: This function will be called without the rport lock + * held, but it will lock, call an _enter_* function or fc_rport_error + * and then unlock the rport. + */ +static void fc_rport_rtv_resp(struct fc_seq *sp, struct fc_frame *fp, + void *rp_arg) +{ + struct fc_rport *rport = rp_arg; + struct fc_rport_libfc_priv *rdata = rport->dd_data; + u8 op; + + mutex_lock(&rdata->rp_mutex); + + FC_DEBUG_RPORT("Received a RTV response from port (%6x)\n", + rport->port_id); + + if (rdata->rp_state != RPORT_ST_RTV) { + FC_DBG("Received a RTV response, but in state %s\n", + fc_rport_state(rport)); + goto out; + } + + if (IS_ERR(fp)) { + fc_rport_error(rport, fp); + goto err; + } + + op = fc_frame_payload_op(fp); + if (op == ELS_LS_ACC) { + struct fc_els_rtv_acc *rtv; + u32 toq; + u32 tov; + + rtv = fc_frame_payload_get(fp, sizeof(*rtv)); + if (rtv) { + toq = ntohl(rtv->rtv_toq); + tov = ntohl(rtv->rtv_r_a_tov); + if (tov == 0) + tov = 1; + rdata->r_a_tov = tov; + tov = ntohl(rtv->rtv_e_d_tov); + if (toq & FC_ELS_RTV_EDRES) + tov /= 1000000; + if (tov == 0) + tov = 1; + rdata->e_d_tov = tov; + } + } + + fc_rport_enter_ready(rport); + +out: + fc_frame_free(fp); +err: + mutex_unlock(&rdata->rp_mutex); + put_device(&rport->dev); +} + +/** + * fc_rport_enter_rtv - Send Request Timeout Value (RTV) request to peer + * @rport: Fibre Channel remote port to send RTV to + * + * Locking Note: The rport lock is expected to be held before calling + * this routine. + */ +static void fc_rport_enter_rtv(struct fc_rport *rport) +{ + struct fc_frame *fp; + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + + FC_DEBUG_RPORT("Port (%6x) entered RTV state from %s state\n", + rport->port_id, fc_rport_state(rport)); + + fc_rport_state_enter(rport, RPORT_ST_RTV); + + fp = fc_frame_alloc(lport, sizeof(struct fc_els_rtv)); + if (!fp) { + fc_rport_error(rport, fp); + return; + } + + if (!lport->tt.elsct_send(lport, rport, fp, ELS_RTV, + fc_rport_rtv_resp, rport, lport->e_d_tov)) + fc_rport_error(rport, fp); + else + get_device(&rport->dev); +} + +/** + * fc_rport_enter_logo - Send Logout (LOGO) request to peer + * @rport: Fibre Channel remote port to send LOGO to + * + * Locking Note: The rport lock is expected to be held before calling + * this routine. + */ +static void fc_rport_enter_logo(struct fc_rport *rport) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + struct fc_frame *fp; + + FC_DEBUG_RPORT("Port (%6x) entered LOGO state from %s state\n", + rport->port_id, fc_rport_state(rport)); + + fc_rport_state_enter(rport, RPORT_ST_LOGO); + + fp = fc_frame_alloc(lport, sizeof(struct fc_els_logo)); + if (!fp) { + fc_rport_error(rport, fp); + return; + } + + if (!lport->tt.elsct_send(lport, rport, fp, ELS_LOGO, + fc_rport_logo_resp, rport, lport->e_d_tov)) + fc_rport_error(rport, fp); + else + get_device(&rport->dev); +} + + +/** + * fc_rport_recv_req - Receive a request from a rport + * @sp: current sequence in the PLOGI exchange + * @fp: response frame + * @rp_arg: Fibre Channel remote port + * + * Locking Note: Called without the rport lock held. This + * function will hold the rport lock, call an _enter_* + * function and then unlock the rport. + */ +void fc_rport_recv_req(struct fc_seq *sp, struct fc_frame *fp, + struct fc_rport *rport) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + + struct fc_frame_header *fh; + struct fc_seq_els_data els_data; + u8 op; + + mutex_lock(&rdata->rp_mutex); + + els_data.fp = NULL; + els_data.explan = ELS_EXPL_NONE; + els_data.reason = ELS_RJT_NONE; + + fh = fc_frame_header_get(fp); + + if (fh->fh_r_ctl == FC_RCTL_ELS_REQ && fh->fh_type == FC_TYPE_ELS) { + op = fc_frame_payload_op(fp); + switch (op) { + case ELS_PLOGI: + fc_rport_recv_plogi_req(rport, sp, fp); + break; + case ELS_PRLI: + fc_rport_recv_prli_req(rport, sp, fp); + break; + case ELS_PRLO: + fc_rport_recv_prlo_req(rport, sp, fp); + break; + case ELS_LOGO: + fc_rport_recv_logo_req(rport, sp, fp); + break; + case ELS_RRQ: + els_data.fp = fp; + lport->tt.seq_els_rsp_send(sp, ELS_RRQ, &els_data); + break; + case ELS_REC: + els_data.fp = fp; + lport->tt.seq_els_rsp_send(sp, ELS_REC, &els_data); + break; + default: + els_data.reason = ELS_RJT_UNSUP; + lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &els_data); + break; + } + } + + mutex_unlock(&rdata->rp_mutex); +} + +/** + * fc_rport_recv_plogi_req - Handle incoming Port Login (PLOGI) request + * @rport: Fibre Channel remote port that initiated PLOGI + * @sp: current sequence in the PLOGI exchange + * @fp: PLOGI request frame + * + * Locking Note: The rport lock is exected to be held before calling + * this function. + */ +static void fc_rport_recv_plogi_req(struct fc_rport *rport, + struct fc_seq *sp, struct fc_frame *rx_fp) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + struct fc_frame *fp = rx_fp; + struct fc_exch *ep; + struct fc_frame_header *fh; + struct fc_els_flogi *pl; + struct fc_seq_els_data rjt_data; + u32 sid; + u64 wwpn; + u64 wwnn; + enum fc_els_rjt_reason reject = 0; + u32 f_ctl; + rjt_data.fp = NULL; + + fh = fc_frame_header_get(fp); + + FC_DEBUG_RPORT("Received PLOGI request from port (%6x) " + "while in state %s\n", ntoh24(fh->fh_s_id), + fc_rport_state(rport)); + + sid = ntoh24(fh->fh_s_id); + pl = fc_frame_payload_get(fp, sizeof(*pl)); + if (!pl) { + FC_DBG("incoming PLOGI from %x too short\n", sid); + WARN_ON(1); + /* XXX TBD: send reject? */ + fc_frame_free(fp); + return; + } + wwpn = get_unaligned_be64(&pl->fl_wwpn); + wwnn = get_unaligned_be64(&pl->fl_wwnn); + + /* + * If the session was just created, possibly due to the incoming PLOGI, + * set the state appropriately and accept the PLOGI. + * + * If we had also sent a PLOGI, and if the received PLOGI is from a + * higher WWPN, we accept it, otherwise an LS_RJT is sent with reason + * "command already in progress". + * + * XXX TBD: If the session was ready before, the PLOGI should result in + * all outstanding exchanges being reset. + */ + switch (rdata->rp_state) { + case RPORT_ST_INIT: + FC_DEBUG_RPORT("incoming PLOGI from %6x wwpn %llx state INIT " + "- reject\n", sid, wwpn); + reject = ELS_RJT_UNSUP; + break; + case RPORT_ST_PLOGI: + FC_DEBUG_RPORT("incoming PLOGI from %x in PLOGI state %d\n", + sid, rdata->rp_state); + if (wwpn < lport->wwpn) + reject = ELS_RJT_INPROG; + break; + case RPORT_ST_PRLI: + case RPORT_ST_READY: + FC_DEBUG_RPORT("incoming PLOGI from %x in logged-in state %d " + "- ignored for now\n", sid, rdata->rp_state); + /* XXX TBD - should reset */ + break; + case RPORT_ST_NONE: + default: + FC_DEBUG_RPORT("incoming PLOGI from %x in unexpected " + "state %d\n", sid, rdata->rp_state); + break; + } + + if (reject) { + rjt_data.reason = reject; + rjt_data.explan = ELS_EXPL_NONE; + lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data); + fc_frame_free(fp); + } else { + fp = fc_frame_alloc(lport, sizeof(*pl)); + if (fp == NULL) { + fp = rx_fp; + rjt_data.reason = ELS_RJT_UNAB; + rjt_data.explan = ELS_EXPL_NONE; + lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data); + fc_frame_free(fp); + } else { + sp = lport->tt.seq_start_next(sp); + WARN_ON(!sp); + fc_rport_set_name(rport, wwpn, wwnn); + + /* + * Get session payload size from incoming PLOGI. + */ + rport->maxframe_size = + fc_plogi_get_maxframe(pl, lport->mfs); + fc_frame_free(rx_fp); + fc_plogi_fill(lport, fp, ELS_LS_ACC); + + /* + * Send LS_ACC. If this fails, + * the originator should retry. + */ + f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ; + f_ctl |= FC_FC_END_SEQ | FC_FC_SEQ_INIT; + ep = fc_seq_exch(sp); + fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid, + FC_TYPE_ELS, f_ctl, 0); + lport->tt.seq_send(lport, sp, fp); + if (rdata->rp_state == RPORT_ST_PLOGI) + fc_rport_enter_prli(rport); + } + } +} + +/** + * fc_rport_recv_prli_req - Handle incoming Process Login (PRLI) request + * @rport: Fibre Channel remote port that initiated PRLI + * @sp: current sequence in the PRLI exchange + * @fp: PRLI request frame + * + * Locking Note: The rport lock is exected to be held before calling + * this function. + */ +static void fc_rport_recv_prli_req(struct fc_rport *rport, + struct fc_seq *sp, struct fc_frame *rx_fp) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + struct fc_exch *ep; + struct fc_frame *fp; + struct fc_frame_header *fh; + struct { + struct fc_els_prli prli; + struct fc_els_spp spp; + } *pp; + struct fc_els_spp *rspp; /* request service param page */ + struct fc_els_spp *spp; /* response spp */ + unsigned int len; + unsigned int plen; + enum fc_els_rjt_reason reason = ELS_RJT_UNAB; + enum fc_els_rjt_explan explan = ELS_EXPL_NONE; + enum fc_els_spp_resp resp; + struct fc_seq_els_data rjt_data; + u32 f_ctl; + u32 fcp_parm; + u32 roles = FC_RPORT_ROLE_UNKNOWN; + rjt_data.fp = NULL; + + fh = fc_frame_header_get(rx_fp); + + FC_DEBUG_RPORT("Received PRLI request from port (%6x) " + "while in state %s\n", ntoh24(fh->fh_s_id), + fc_rport_state(rport)); + + switch (rdata->rp_state) { + case RPORT_ST_PRLI: + case RPORT_ST_READY: + reason = ELS_RJT_NONE; + break; + default: + break; + } + len = fr_len(rx_fp) - sizeof(*fh); + pp = fc_frame_payload_get(rx_fp, sizeof(*pp)); + if (pp == NULL) { + reason = ELS_RJT_PROT; + explan = ELS_EXPL_INV_LEN; + } else { + plen = ntohs(pp->prli.prli_len); + if ((plen % 4) != 0 || plen > len) { + reason = ELS_RJT_PROT; + explan = ELS_EXPL_INV_LEN; + } else if (plen < len) { + len = plen; + } + plen = pp->prli.prli_spp_len; + if ((plen % 4) != 0 || plen < sizeof(*spp) || + plen > len || len < sizeof(*pp)) { + reason = ELS_RJT_PROT; + explan = ELS_EXPL_INV_LEN; + } + rspp = &pp->spp; + } + if (reason != ELS_RJT_NONE || + (fp = fc_frame_alloc(lport, len)) == NULL) { + rjt_data.reason = reason; + rjt_data.explan = explan; + lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data); + } else { + sp = lport->tt.seq_start_next(sp); + WARN_ON(!sp); + pp = fc_frame_payload_get(fp, len); + WARN_ON(!pp); + memset(pp, 0, len); + pp->prli.prli_cmd = ELS_LS_ACC; + pp->prli.prli_spp_len = plen; + pp->prli.prli_len = htons(len); + len -= sizeof(struct fc_els_prli); + + /* + * Go through all the service parameter pages and build + * response. If plen indicates longer SPP than standard, + * use that. The entire response has been pre-cleared above. + */ + spp = &pp->spp; + while (len >= plen) { + spp->spp_type = rspp->spp_type; + spp->spp_type_ext = rspp->spp_type_ext; + spp->spp_flags = rspp->spp_flags & FC_SPP_EST_IMG_PAIR; + resp = FC_SPP_RESP_ACK; + if (rspp->spp_flags & FC_SPP_RPA_VAL) + resp = FC_SPP_RESP_NO_PA; + switch (rspp->spp_type) { + case 0: /* common to all FC-4 types */ + break; + case FC_TYPE_FCP: + fcp_parm = ntohl(rspp->spp_params); + if (fcp_parm * FCP_SPPF_RETRY) + rdata->flags |= FC_RP_FLAGS_RETRY; + rport->supported_classes = FC_COS_CLASS3; + if (fcp_parm & FCP_SPPF_INIT_FCN) + roles |= FC_RPORT_ROLE_FCP_INITIATOR; + if (fcp_parm & FCP_SPPF_TARG_FCN) + roles |= FC_RPORT_ROLE_FCP_TARGET; + rport->roles = roles; + + spp->spp_params = + htonl(lport->service_params); + break; + default: + resp = FC_SPP_RESP_INVL; + break; + } + spp->spp_flags |= resp; + len -= plen; + rspp = (struct fc_els_spp *)((char *)rspp + plen); + spp = (struct fc_els_spp *)((char *)spp + plen); + } + + /* + * Send LS_ACC. If this fails, the originator should retry. + */ + f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ; + f_ctl |= FC_FC_END_SEQ | FC_FC_SEQ_INIT; + ep = fc_seq_exch(sp); + fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid, + FC_TYPE_ELS, f_ctl, 0); + lport->tt.seq_send(lport, sp, fp); + + /* + * Get lock and re-check state. + */ + switch (rdata->rp_state) { + case RPORT_ST_PRLI: + fc_rport_enter_ready(rport); + break; + case RPORT_ST_READY: + break; + default: + break; + } + } + fc_frame_free(rx_fp); +} + +/** + * fc_rport_recv_prlo_req - Handle incoming Process Logout (PRLO) request + * @rport: Fibre Channel remote port that initiated PRLO + * @sp: current sequence in the PRLO exchange + * @fp: PRLO request frame + * + * Locking Note: The rport lock is exected to be held before calling + * this function. + */ +static void fc_rport_recv_prlo_req(struct fc_rport *rport, struct fc_seq *sp, + struct fc_frame *fp) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + + struct fc_frame_header *fh; + struct fc_seq_els_data rjt_data; + + fh = fc_frame_header_get(fp); + + FC_DEBUG_RPORT("Received PRLO request from port (%6x) " + "while in state %s\n", ntoh24(fh->fh_s_id), + fc_rport_state(rport)); + + rjt_data.fp = NULL; + rjt_data.reason = ELS_RJT_UNAB; + rjt_data.explan = ELS_EXPL_NONE; + lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data); + fc_frame_free(fp); +} + +/** + * fc_rport_recv_logo_req - Handle incoming Logout (LOGO) request + * @rport: Fibre Channel remote port that initiated LOGO + * @sp: current sequence in the LOGO exchange + * @fp: LOGO request frame + * + * Locking Note: The rport lock is exected to be held before calling + * this function. + */ +static void fc_rport_recv_logo_req(struct fc_rport *rport, struct fc_seq *sp, + struct fc_frame *fp) +{ + struct fc_frame_header *fh; + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + + fh = fc_frame_header_get(fp); + + FC_DEBUG_RPORT("Received LOGO request from port (%6x) " + "while in state %s\n", ntoh24(fh->fh_s_id), + fc_rport_state(rport)); + + rdata->event = RPORT_EV_LOGO; + queue_work(rport_event_queue, &rdata->event_work); + + lport->tt.seq_els_rsp_send(sp, ELS_LS_ACC, NULL); + fc_frame_free(fp); +} + +static void fc_rport_flush_queue(void) +{ + flush_workqueue(rport_event_queue); +} + + +int fc_rport_init(struct fc_lport *lport) +{ + if (!lport->tt.rport_login) + lport->tt.rport_login = fc_rport_login; + + if (!lport->tt.rport_logoff) + lport->tt.rport_logoff = fc_rport_logoff; + + if (!lport->tt.rport_recv_req) + lport->tt.rport_recv_req = fc_rport_recv_req; + + if (!lport->tt.rport_flush_queue) + lport->tt.rport_flush_queue = fc_rport_flush_queue; + + return 0; +} +EXPORT_SYMBOL(fc_rport_init); + +int fc_setup_rport() +{ + rport_event_queue = create_singlethread_workqueue("fc_rport_eq"); + if (!rport_event_queue) + return -ENOMEM; + return 0; +} +EXPORT_SYMBOL(fc_setup_rport); + +void fc_destroy_rport() +{ + destroy_workqueue(rport_event_queue); +} +EXPORT_SYMBOL(fc_destroy_rport); + +void fc_rport_terminate_io(struct fc_rport *rport) +{ + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + + lport->tt.exch_mgr_reset(lport->emp, 0, rport->port_id); + lport->tt.exch_mgr_reset(lport->emp, rport->port_id, 0); +} +EXPORT_SYMBOL(fc_rport_terminate_io); |
