summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/isci/probe_roms.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/isci/probe_roms.h')
-rw-r--r--drivers/scsi/isci/probe_roms.h249
1 files changed, 249 insertions, 0 deletions
diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h
new file mode 100644
index 0000000..dc007e6
--- /dev/null
+++ b/drivers/scsi/isci/probe_roms.h
@@ -0,0 +1,249 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _ISCI_PROBE_ROMS_H_
+#define _ISCI_PROBE_ROMS_H_
+
+#ifdef __KERNEL__
+#include <linux/firmware.h>
+#include <linux/pci.h>
+#include <linux/efi.h>
+#include "isci.h"
+
+#define SCIC_SDS_PARM_NO_SPEED 0
+
+/* generation 1 (i.e. 1.5 Gb/s) */
+#define SCIC_SDS_PARM_GEN1_SPEED 1
+
+/* generation 2 (i.e. 3.0 Gb/s) */
+#define SCIC_SDS_PARM_GEN2_SPEED 2
+
+/* generation 3 (i.e. 6.0 Gb/s) */
+#define SCIC_SDS_PARM_GEN3_SPEED 3
+#define SCIC_SDS_PARM_MAX_SPEED SCIC_SDS_PARM_GEN3_SPEED
+
+/* parameters that can be set by module parameters */
+struct sci_user_parameters {
+ struct sci_phy_user_params {
+ /**
+ * This field specifies the NOTIFY (ENABLE SPIN UP) primitive
+ * insertion frequency for this phy index.
+ */
+ u32 notify_enable_spin_up_insertion_frequency;
+
+ /**
+ * This method specifies the number of transmitted DWORDs within which
+ * to transmit a single ALIGN primitive. This value applies regardless
+ * of what type of device is attached or connection state. A value of
+ * 0 indicates that no ALIGN primitives will be inserted.
+ */
+ u16 align_insertion_frequency;
+
+ /**
+ * This method specifies the number of transmitted DWORDs within which
+ * to transmit 2 ALIGN primitives. This applies for SAS connections
+ * only. A minimum value of 3 is required for this field.
+ */
+ u16 in_connection_align_insertion_frequency;
+
+ /**
+ * This field indicates the maximum speed generation to be utilized
+ * by phys in the supplied port.
+ * - A value of 1 indicates generation 1 (i.e. 1.5 Gb/s).
+ * - A value of 2 indicates generation 2 (i.e. 3.0 Gb/s).
+ * - A value of 3 indicates generation 3 (i.e. 6.0 Gb/s).
+ */
+ u8 max_speed_generation;
+
+ } phys[SCI_MAX_PHYS];
+
+ /**
+ * This field specifies the maximum number of direct attached devices
+ * that can have power supplied to them simultaneously.
+ */
+ u8 max_number_concurrent_device_spin_up;
+
+ /**
+ * This field specifies the number of seconds to allow a phy to consume
+ * power before yielding to another phy.
+ *
+ */
+ u8 phy_spin_up_delay_interval;
+
+ /**
+ * These timer values specifies how long a link will remain open with no
+ * activity in increments of a microsecond, it can be in increments of
+ * 100 microseconds if the upper most bit is set.
+ *
+ */
+ u16 stp_inactivity_timeout;
+ u16 ssp_inactivity_timeout;
+
+ /**
+ * These timer values specifies how long a link will remain open in increments
+ * of 100 microseconds.
+ *
+ */
+ u16 stp_max_occupancy_timeout;
+ u16 ssp_max_occupancy_timeout;
+
+ /**
+ * This timer value specifies how long a link will remain open with no
+ * outbound traffic in increments of a microsecond.
+ *
+ */
+ u8 no_outbound_task_timeout;
+
+};
+
+#define SCIC_SDS_PARM_PHY_MASK_MIN 0x0
+#define SCIC_SDS_PARM_PHY_MASK_MAX 0xF
+#define MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT 4
+
+struct sci_oem_params;
+int sci_oem_parameters_validate(struct sci_oem_params *oem);
+
+struct isci_orom;
+struct isci_orom *isci_request_oprom(struct pci_dev *pdev);
+enum sci_status isci_parse_oem_parameters(struct sci_oem_params *oem,
+ struct isci_orom *orom, int scu_index);
+struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmware *fw);
+struct isci_orom *isci_get_efi_var(struct pci_dev *pdev);
+
+struct isci_oem_hdr {
+ u8 sig[4];
+ u8 rev_major;
+ u8 rev_minor;
+ u16 len;
+ u8 checksum;
+ u8 reserved1;
+ u16 reserved2;
+} __attribute__ ((packed));
+
+#else
+#define SCI_MAX_PORTS 4
+#define SCI_MAX_PHYS 4
+#define SCI_MAX_CONTROLLERS 2
+#endif
+
+#define ISCI_FW_NAME "isci/isci_firmware.bin"
+
+#define ROMSIGNATURE 0xaa55
+
+#define ISCI_OEM_SIG "$OEM"
+#define ISCI_OEM_SIG_SIZE 4
+#define ISCI_ROM_SIG "ISCUOEMB"
+#define ISCI_ROM_SIG_SIZE 8
+
+#define ISCI_EFI_VENDOR_GUID \
+ EFI_GUID(0x193dfefa, 0xa445, 0x4302, 0x99, 0xd8, 0xef, 0x3a, 0xad, \
+ 0x1a, 0x04, 0xc6)
+#define ISCI_EFI_VAR_NAME "RstScuO"
+
+/* Allowed PORT configuration modes APC Automatic PORT configuration mode is
+ * defined by the OEM configuration parameters providing no PHY_MASK parameters
+ * for any PORT. i.e. There are no phys assigned to any of the ports at start.
+ * MPC Manual PORT configuration mode is defined by the OEM configuration
+ * parameters providing a PHY_MASK value for any PORT. It is assumed that any
+ * PORT with no PHY_MASK is an invalid port and not all PHYs must be assigned.
+ * A PORT_PHY mask that assigns just a single PHY to a port and no other PHYs
+ * being assigned is sufficient to declare manual PORT configuration.
+ */
+enum sci_port_configuration_mode {
+ SCIC_PORT_MANUAL_CONFIGURATION_MODE = 0,
+ SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE = 1
+};
+
+struct sci_bios_oem_param_block_hdr {
+ uint8_t signature[ISCI_ROM_SIG_SIZE];
+ uint16_t total_block_length;
+ uint8_t hdr_length;
+ uint8_t version;
+ uint8_t preboot_source;
+ uint8_t num_elements;
+ uint16_t element_length;
+ uint8_t reserved[8];
+} __attribute__ ((packed));
+
+struct sci_oem_params {
+ struct {
+ uint8_t mode_type;
+ uint8_t max_concurrent_dev_spin_up;
+ uint8_t do_enable_ssc;
+ uint8_t reserved;
+ } controller;
+
+ struct {
+ uint8_t phy_mask;
+ } ports[SCI_MAX_PORTS];
+
+ struct sci_phy_oem_params {
+ struct {
+ uint32_t high;
+ uint32_t low;
+ } sas_address;
+
+ uint32_t afe_tx_amp_control0;
+ uint32_t afe_tx_amp_control1;
+ uint32_t afe_tx_amp_control2;
+ uint32_t afe_tx_amp_control3;
+ } phys[SCI_MAX_PHYS];
+} __attribute__ ((packed));
+
+struct isci_orom {
+ struct sci_bios_oem_param_block_hdr hdr;
+ struct sci_oem_params ctrl[SCI_MAX_CONTROLLERS];
+} __attribute__ ((packed));
+
+#endif
OpenPOWER on IntegriCloud