diff options
Diffstat (limited to 'drivers/scsi/isci/core/intel_scsi.h')
-rw-r--r-- | drivers/scsi/isci/core/intel_scsi.h | 474 |
1 files changed, 474 insertions, 0 deletions
diff --git a/drivers/scsi/isci/core/intel_scsi.h b/drivers/scsi/isci/core/intel_scsi.h new file mode 100644 index 0000000..1e45d3c --- /dev/null +++ b/drivers/scsi/isci/core/intel_scsi.h @@ -0,0 +1,474 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file defines all of the SCSI related constants, enumerations, and + * types. Please note that this file does not necessarily contain an + * exhaustive list of all constants, commands, sub-commands, etc. + * + * + */ + +#ifndef _SCSI_H__ +#define _SCSI_H__ + + +/* + * ****************************************************************************** + * * C O N S T A N T S A N D M A C R O S + * ****************************************************************************** */ + +/** + * enum _SCSI_TASK_MGMT_REQUEST_CODES - This enumberation contains the + * constants to be used for SCSI task management request codes. SAM does + * not specify any particular values for these codes so constants used here + * are the same as those specified in SAS. + * + * + */ +enum scsi_task_mgmt_request_codes { + SCSI_TASK_REQUEST_ABORT_TASK = 0x01, + SCSI_TASK_REQUEST_ABORT_TASK_SET = 0x02, + SCSI_TASK_REQUEST_CLEAR_TASK_SET = 0x04, + SCSI_TASK_REQUEST_LOGICAL_UNIT_RESET = 0x08, + SCSI_TASK_REQUEST_I_T_NEXUS_RESET = 0x10, + SCSI_TASK_REQUEST_CLEAR_ACA = 0x40, + SCSI_TASK_REQUEST_QUERY_TASK = 0x80, + SCSI_TASK_REQUEST_QUERY_TASK_SET = 0x81, + SCSI_TASK_REQUEST_QUERY_UNIT_ATTENTION = 0x82, + +}; + +/** + * enum _SCSI_TASK_MGMT_RESPONSE_CODES - This enumeration contains all of the + * SCSI task management response codes. + * + * + */ +enum scsi_task_mgmt_response_codes { + SCSI_TASK_MGMT_FUNC_COMPLETE = 0, + SCSI_INVALID_FRAME = 2, + SCSI_TASK_MGMT_FUNC_NOT_SUPPORTED = 4, + SCSI_TASK_MGMT_FUNC_FAILED = 5, + SCSI_TASK_MGMT_FUNC_SUCCEEDED = 8, + SCSI_INVALID_LUN = 9 +}; + +/** + * enum _SCSI_SENSE_RESPONSE_CODE - this enumeration depicts the types of sense + * data responses as per SPC-3. + * + * + */ +enum scsi_sense_response_code { + SCSI_FIXED_CURRENT_RESPONSE_CODE = 0x70, + SCSI_FIXED_DEFERRED_RESPONSE_CODE = 0x71, + SCSI_DESCRIPTOR_CURRENT_RESPONSE_CODE = 0x72, + SCSI_DESCRIPTOR_DEFERRED_RESPONSE_CODE = 0x73 + +}; + +/* + * This constant represents the valid bit located in byte 0 of a FIXED + * format sense data. */ +#define SCSI_FIXED_SENSE_DATA_VALID_BIT 0x80 + +#define SCSI_FIXED_SENSE_DATA_BASE_LENGTH 18 + +/* This value is used in the DATAPRES field of the SCSI Response IU. */ +#define SCSI_RESPONSE_DATA_PRES_SENSE_DATA 0x02 + +/** + * + * + * SCSI_SENSE_KEYS These constants delineate all of the SCSI protocol sense key + * constants + */ +#define SCSI_SENSE_NO_SENSE 0x00 +#define SCSI_SENSE_RECOVERED_ERROR 0x01 +#define SCSI_SENSE_NOT_READY 0x02 +#define SCSI_SENSE_MEDIUM_ERROR 0x03 +#define SCSI_SENSE_HARDWARE_ERROR 0x04 +#define SCSI_SENSE_ILLEGAL_REQUEST 0x05 +#define SCSI_SENSE_UNIT_ATTENTION 0x06 +#define SCSI_SENSE_DATA_PROTECT 0x07 +#define SCSI_SENSE_BLANK_CHECK 0x08 +#define SCSI_SENSE_VENDOR_SPECIFIC 0x09 +#define SCSI_SENSE_COPY_ABORTED 0x0A +#define SCSI_SENSE_ABORTED_COMMAND 0x0B +#define SCSI_SENSE_VOLUME_OVERFLOW 0x0D +#define SCSI_SENSE_MISCOMPARE 0x0E + +/** + * + * + * SCSI_ADDITIONAL_SENSE_CODES These constants delineate all of the SCSI + * protocol additional sense code constants. + */ +#define SCSI_ASC_NO_ADDITIONAL_SENSE 0x00 +#define SCSI_ASC_INITIALIZING_COMMAND_REQUIRED 0x04 +#define SCSI_ASC_LUN_SELF_TEST_IN_PROGRESS 0x04 +#define SCSI_ASC_LUN_FORMAT_IN_PROGRESS 0x04 +#define SCSI_ASC_LUN_NOT_RESPOND_TO_SELECTION 0x05 +#define SCSI_ASC_UNRECOVERED_READ_ERROR 0x11 +#define SCSI_ASC_INVALID_COMMAND_OPERATION_CODE 0x20 +#define SCSI_ASC_LBA_OUT_OF_RANGE 0x21 +#define SCSI_ASC_INVALID_FIELD_IN_CDB 0x24 +#define SCSI_ASC_INVALID_FIELD_IN_PARM_LIST 0x26 +#define SCSI_ASC_WRITE_PROTECTED 0x27 +#define SCSI_ASC_NOT_READY_TO_READY_CHANGE 0x28 +#define SCSI_ASC_SAVING_PARMS_NOT_SUPPORTED 0x39 +#define SCSI_ASC_MEDIUM_NOT_PRESENT 0x3A +#define SCSI_ASC_INTERNAL_TARGET_FAILURE 0x44 +#define SCSI_ASC_IU_CRC_ERROR_DETECTED 0x47 +#define SCSI_ASC_MEDIUM_REMOVAL_REQUEST 0x5A +#define SCSI_ASC_COMMAND_SEQUENCE_ERROR 0x2C +#define SCSI_ASC_MEDIA_LOAD_OR_EJECT_FAILED 0x53 +#define SCSI_ASC_HARDWARE_IMPENDING_FAILURE 0x5D +#define SCSI_ASC_POWER_STATE_CHANGE 0x5E +#define SCSI_DIAGNOSTIC_FAILURE_ON_COMPONENT 0x40 +#define SCSI_ASC_ATA_DEVICE_FEATURE_NOT_ENABLED 0x67 + +/** + * + * + * SCSI_ADDITIONAL_SENSE_CODE_QUALIFIERS This enumeration contains all of the + * used SCSI protocol additional sense code qualifier constants. + */ +#define SCSI_ASCQ_NO_ADDITIONAL_SENSE 0x00 +#define SCSI_ASCQ_INVALID_FIELD_IN_CDB 0x00 +#define SCSI_ASCQ_INVALID_FIELD_IN_PARM_LIST 0x00 +#define SCSI_ASCQ_LUN_NOT_RESPOND_TO_SELECTION 0x00 +#define SCSI_ASCQ_INTERNAL_TARGET_FAILURE 0x00 +#define SCSI_ASCQ_LBA_OUT_OF_RANGE 0x00 +#define SCSI_ASCQ_MEDIUM_NOT_PRESENT 0x00 +#define SCSI_ASCQ_NOT_READY_TO_READY_CHANGE 0x00 +#define SCSI_ASCQ_WRITE_PROTECTED 0x00 +#define SCSI_ASCQ_UNRECOVERED_READ_ERROR 0x00 +#define SCSI_ASCQ_SAVING_PARMS_NOT_SUPPORTED 0x00 +#define SCSI_ASCQ_INVALID_COMMAND_OPERATION_CODE 0x00 +#define SCSI_ASCQ_MEDIUM_REMOVAL_REQUEST 0x01 +#define SCSI_ASCQ_INITIALIZING_COMMAND_REQUIRED 0x02 +#define SCSI_ASCQ_IU_CRC_ERROR_DETECTED 0x03 +#define SCSI_ASCQ_LUN_FORMAT_IN_PROGRESS 0x04 +#define SCSI_ASCQ_LUN_SELF_TEST_IN_PROGRESS 0x09 +#define SCSI_ASCQ_GENERAL_HARD_DRIVE_FAILURE 0x10 +#define SCSI_ASCQ_IDLE_CONDITION_ACTIVATE_BY_COMMAND 0x03 +#define SCSI_ASCQ_STANDBY_CONDITION_ACTIVATE_BY_COMMAND 0x04 +#define SCSI_ASCQ_POWER_STATE_CHANGE_TO_IDLE 0x42 +#define SCSI_ASCQ_POWER_STATE_CHANGE_TO_STANDBY 0x43 +#define SCSI_ASCQ_ATA_DEVICE_FEATURE_NOT_ENABLED 0x0B +#define SCSI_ASCQ_UNRECOVERED_READ_ERROR_AUTO_REALLOCATE_FAIL 0x04 + + + +/** + * + * + * SCSI_STATUS_CODES These constants define all of the used SCSI status values. + */ +#define SCSI_STATUS_GOOD 0x00 +#define SCSI_STATUS_CHECK_CONDITION 0x02 +#define SCSI_STATUS_CONDITION_MET 0x04 +#define SCSI_STATUS_BUSY 0x08 +#define SCSI_STATUS_TASKFULL 0x28 +#define SCSI_STATUS_ACA 0x30 +#define SCSI_STATUS_ABORT 0x40 + +/** + * + * + * SCSI_OPERATION_CODES These constants delineate all of the SCSI + * command/operation codes. + */ +#define SCSI_INQUIRY 0x12 +#define SCSI_READ_CAPACITY_10 0x25 +#define SCSI_SERVICE_ACTION_IN_16 0x9E +#define SCSI_TEST_UNIT_READY 0x00 +#define SCSI_START_STOP_UNIT 0x1B +#define SCSI_SYNCHRONIZE_CACHE_10 0x35 +#define SCSI_SYNCHRONIZE_CACHE_16 0x91 +#define SCSI_REQUEST_SENSE 0x03 +#define SCSI_REPORT_LUNS 0xA0 +#define SCSI_REASSIGN_BLOCKS 0x07 +#define SCSI_READ_6 0x08 +#define SCSI_READ_10 0x28 +#define SCSI_READ_12 0xA8 +#define SCSI_READ_16 0x88 +#define SCSI_WRITE_6 0x0A +#define SCSI_WRITE_10 0x2A +#define SCSI_WRITE_12 0xAA +#define SCSI_WRITE_16 0x8A +#define SCSI_VERIFY_10 0x2F +#define SCSI_VERIFY_12 0xAF +#define SCSI_VERIFY_16 0x8F +#define SCSI_SEEK_6 0x01 +#define SCSI_SEEK_10 0x02 +#define SCSI_WRITE_VERIFY 0x2E +#define SCSI_FORMAT_UNIT 0x04 +#define SCSI_READ_BUFFER 0x3C +#define SCSI_WRITE_BUFFER 0x3B +#define SCSI_SEND_DIAGNOSTIC 0x1D +#define SCSI_RECEIVE_DIAGNOSTIC 0x1C +#define SCSI_MODE_SENSE_6 0x1A +#define SCSI_MODE_SENSE_10 0x5A +#define SCSI_MODE_SELECT_6 0x15 +#define SCSI_MODE_SELECT_10 0x55 +#define SCSI_MAINTENANCE_IN 0xA3 +#define SCSI_LOG_SENSE 0x4D +#define SCSI_LOG_SELECT 0x4C +#define SCSI_RESERVE_6 0x16 +#define SCSI_RESERVE_10 0x56 +#define SCSI_RELEASE_6 0x17 +#define SCSI_RELEASE_10 0x57 +#define SCSI_ATA_PASSTHRU_12 0xA1 +#define SCSI_ATA_PASSTHRU_16 0x85 +#define SCSI_WRITE_LONG_10 0x3F +#define SCSI_WRITE_LONG_16 0x9F +#define SCSI_PERSISTENT_RESERVE_IN 0x5E +#define SCSI_PERSISTENT_RESERVE_OUT 0x5F + +/** + * + * + * SCSI_SERVICE_ACTION_IN_CODES Service action in operations. + */ +#define SCSI_SERVICE_ACTION_IN_CODES_READ_CAPACITY_16 0x10 + +#define SCSI_SERVICE_ACTION_MASK 0x1f + +/** + * + * + * SCSI_MAINTENANCE_IN_SERVICE_ACTION_CODES MAINTENANCE IN service action codes. + */ +#define SCSI_REPORT_TASK_MGMT 0x0D +#define SCSI_REPORT_OP_CODES 0x0C + +/** + * + * + * SCSI_MODE_PAGE_CONTROLS These constants delineate all of the used SCSI Mode + * Page control values. + */ +#define SCSI_MODE_SENSE_PC_CURRENT 0x0 +#define SCSI_MODE_SENSE_PC_CHANGEABLE 0x1 +#define SCSI_MODE_SENSE_PC_DEFAULT 0x2 +#define SCSI_MODE_SENSE_PC_SAVED 0x3 + +#define SCSI_MODE_SENSE_PC_SHIFT 0x06 +#define SCSI_MODE_SENSE_PAGE_CODE_ENABLE 0x3F +#define SCSI_MODE_SENSE_DBD_ENABLE 0x08 +#define SCSI_MODE_SENSE_LLBAA_ENABLE 0x10 + +/** + * + * + * SCSI_MODE_PAGE_CODES These constants delineate all of the used SCSI Mode + * Page codes. + */ +#define SCSI_MODE_PAGE_READ_WRITE_ERROR 0x01 +#define SCSI_MODE_PAGE_DISCONNECT_RECONNECT 0x02 +#define SCSI_MODE_PAGE_CACHING 0x08 +#define SCSI_MODE_PAGE_CONTROL 0x0A +#define SCSI_MODE_PAGE_PROTOCOL_SPECIFIC_PORT 0x19 +#define SCSI_MODE_PAGE_POWER_CONDITION 0x1A +#define SCSI_MODE_PAGE_INFORMATIONAL_EXCP_CONTROL 0x1C +#define SCSI_MODE_PAGE_ALL_PAGES 0x3F + +#define SCSI_MODE_SENSE_ALL_SUB_PAGES_CODE 0xFF +#define SCSI_MODE_SENSE_NO_SUB_PAGES_CODE 0x0 +#define SCSI_MODE_SENSE_PROTOCOL_PORT_NUM_SUBPAGES 0x1 +#define SCSI_MODE_PAGE_CACHE_PAGE_WCE_BIT 0x04 +#define SCSI_MODE_PAGE_CACHE_PAGE_DRA_BIT 0x20 +#define SCSI_MODE_PAGE_DEXCPT_ENABLE 0x08 +#define SCSI_MODE_SENSE_HEADER_FUA_ENABLE 0x10 +#define SCSI_MODE_PAGE_POWER_CONDITION_STANDBY 0x1 +#define SCSI_MODE_PAGE_POWER_CONDITION_IDLE 0x2 + +#define SCSI_MODE_SENSE_6_HEADER_LENGTH 4 +#define SCSI_MODE_SENSE_10_HEADER_LENGTH 8 +#define SCSI_MODE_SENSE_STD_BLOCK_DESCRIPTOR_LENGTH 8 +#define SCSI_MODE_SENSE_LLBA_BLOCK_DESCRIPTOR_LENGTH 16 + +#define SCSI_MODE_PAGE_INFORMATIONAL_EXCP_DXCPT_ENABLE 0x08 +#define SCSI_MODE_PAGE_19_SAS_ID 0x6 +#define SCSI_MODE_PAGE_19_SUB1_PAGE_NUM 0x1 +#define SCSI_MODE_PAGE_19_SUB1_PC 0x59 + +#define SCSI_MODE_HEADER_MEDIUM_TYPE_SBC 0x00 + +/* Mode Select constrains related masks value */ +#define SCSI_MODE_SELECT_PF_BIT 0x1 +#define SCSI_MODE_SELECT_PF_MASK 0x10 +#define SCSI_MODE_SELECT_MODE_PAGE_MRIE_BYTE 0x6 +#define SCSI_MODE_SELECT_MODE_PAGE_MRIE_MASK 0x0F +#define SCSI_MODE_SELECT_MODE_PAGE_SPF_MASK 0x40 +#define SCSI_MODE_SELECT_MODE_PAGE_01_AWRE_MASK 0x80 +#define SCSI_MODE_SELECT_MODE_PAGE_01_ARRE_MASK 0x40 +#define SCSI_MODE_SELECT_MODE_PAGE_01_RC_ERBITS_MASK 0x1F +#define SCSI_MODE_SELECT_MODE_PAGE_08_FSW_LBCSS_NVDIS 0xC1 +#define SCSI_MODE_SELECT_MODE_PAGE_1C_PERF_TEST 0x84 +#define SCSI_MODE_SELECT_MODE_PAGE_0A_TST_TMF_RLEC 0xF1 +#define SCSI_MODE_SELECT_MODE_PAGE_0A_MODIFIER 0xF0 +#define SCSI_MODE_SELECT_MODE_PAGE_0A_UA_SWP 0x38 +#define SCSI_MODE_SELECT_MODE_PAGE_0A_TAS_AUTO 0x47 + + +#define SCSI_CONTROL_BYTE_NACA_BIT_ENABLE 0x04 +#define SCSI_MOVE_FUA_BIT_ENABLE 0x08 +#define SCSI_READ_CAPACITY_PMI_BIT_ENABLE 0x01 +#define SCSI_READ_CAPACITY_10_DATA_LENGTH 8 +#define SCSI_READ_CAPACITY_16_DATA_LENGTH 32 + +/* Inquiry constants */ +#define SCSI_INQUIRY_EVPD_ENABLE 0x01 +#define SCSI_INQUIRY_PAGE_CODE_OFFSET 0x02 +#define SCSI_INQUIRY_SUPPORTED_PAGES_PAGE 0x00 +#define SCSI_INQUIRY_UNIT_SERIAL_NUM_PAGE 0x80 +#define SCSI_INQUIRY_DEVICE_ID_PAGE 0x83 +#define SCSI_INQUIRY_ATA_INFORMATION_PAGE 0x89 +#define SCSI_INQUIRY_BLOCK_DEVICE_PAGE 0xB1 +#define SCSI_INQUIRY_BLOCK_DEVICE_LENGTH 0x3C +#define SCSI_INQUIRY_STANDARD_ALLOCATION_LENGTH 0x24 /* 36 */ + +#define SCSI_REQUEST_SENSE_ALLOCATION_LENGTH 0xFC /* 252 */ + +/** Defines the log page codes that are use in gathing Smart data + */ +#define SCSI_LOG_PAGE_SUPPORTED_PAGES 0x00 +#define SCSI_LOG_PAGE_INFORMATION_EXCEPTION 0x2F +#define SCSI_LOG_PAGE_SELF_TEST 0x10 + +/** + * + * + * SCSI_INQUIRY_VPD The following are constants used with vital product data + * inquiry pages. Values are already shifted into the proper nibble location. + */ +#define SCSI_PIV_ENABLE 0x80 +#define SCSI_LUN_ASSOCIATION 0x00 +#define SCSI_TARGET_PORT_ASSOCIATION 0x10 + +#define SCSI_VEN_UNIQUE_IDENTIFIER_TYPE 0x00 +#define SCSI_NAA_IDENTIFIER_TYPE 0x03 + +#define SCSI_T10_IDENTIFIER_TYPE 0x01 +#define SCSI_BINARY_CODE_SET 0x01 +#define SCSI_ASCII_CODE_SET 0x02 +#define SCSI_FC_PROTOCOL_IDENTIFIER 0x00 +#define SCSI_SAS_PROTOCOL_IDENTIFIER 0x60 + +#define SCSI_VERIFY_BYTCHK_ENABLED 0x02 + +#define SCSI_SYNCHRONIZE_CACHE_IMMED_ENABLED 0x02 +/** + * + * + * SCSI_START_STOP_UNIT_POWER_CONDITION_CODES The following are SCSI Start Stop + * Unit command Power Condition codes. + */ +#define SCSI_START_STOP_UNIT_POWER_CONDITION_START_VALID 0x0 +#define SCSI_START_STOP_UNIT_POWER_CONDITION_ACTIVE 0x1 +#define SCSI_START_STOP_UNIT_POWER_CONDITION_IDLE 0x2 +#define SCSI_START_STOP_UNIT_POWER_CONDITION_STANDBY 0x3 +#define SCSI_START_STOP_UNIT_POWER_CONDITION_LU_CONTROL 0x7 +#define SCSI_START_STOP_UNIT_POWER_CONDITION_FORCE_S_CONTROL 0xB + +#define SCSI_START_STOP_UNIT_IMMED_MASK 0x1 +#define SCSI_START_STOP_UNIT_IMMED_SHIFT 0 + +#define SCSI_START_STOP_UNIT_START_BIT_MASK 0x1 +#define SCSI_START_STOP_UNIT_START_BIT_SHIFT 0 + +#define SCSI_START_STOP_UNIT_LOEJ_BIT_MASK 0x2 +#define SCSI_START_STOP_UNIT_LOEJ_BIT_SHIFT 1 + +#define SCSI_START_STOP_UNIT_NO_FLUSH_MASK 0x4 +#define SCSI_START_STOP_UNIT_NO_FLUSH_SHIFT 2 + +#define SCSI_START_STOP_UNIT_POWER_CONDITION_MODIFIER_MASK 0xF +#define SCSI_START_STOP_UNIT_POWER_CONDITION_MODIFIER_SHIFT 0 + +#define SCSI_START_STOP_UNIT_POWER_CONDITION_MASK 0xF0 +#define SCSI_START_STOP_UNIT_POWER_CONDITION_SHIFT 4 + +#define SCSI_LOG_SENSE_PC_FIELD_MASK 0xC0 +#define SCSI_LOG_SENSE_PC_FIELD_SHIFT 6 + +#define SCSI_LOG_SENSE_PAGE_CODE_FIELD_MASK 0x3F +#define SCSI_LOG_SENSE_PAGE_CODE_FIELD_SHIFT 0 + +/** + * + * + * MRIE - Method of reporting informational exceptions codes + */ +#define NO_REPORTING_INFO_EXCEPTION_CONDITION 0x0 +#define ASYNCHRONOUS_EVENT_REPORTING 0x1 +#define ESTABLISH_UNIT_ATTENTION_CONDITION 0x2 +#define CONDITIONALLY_GENERATE_RECOVERED_ERROR 0x3 +#define UNCONDITIONALLY_GENERATE_RECOVERED_ERROR 0x4 +#define GENERATE_NO_SENSE 0x5 +#define REPORT_INFO_EXCEPTION_CONDITION_ON_REQUEST 0x6 + +#define SCSI_INFORMATION_EXCEPTION_DEXCPT_BIT 0x08 + +/* Reassign Blocks masks */ +#define SCSI_REASSIGN_BLOCKS_LONGLBA_BIT 0x02 +#define SCSI_REASSIGN_BLOCKS_LONGLIST_BIT 0x01 + +#endif /* _SCSI_H_ */ + |