diff options
Diffstat (limited to 'drivers/scsi/hpsa.c')
| -rw-r--r-- | drivers/scsi/hpsa.c | 1336 |
1 files changed, 1077 insertions, 259 deletions
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 7506b65..6a8f958 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -41,6 +41,7 @@ #include <scsi/scsi_host.h> #include <scsi/scsi_tcq.h> #include <scsi/scsi_eh.h> +#include <scsi/scsi_transport_sas.h> #include <scsi/scsi_dbg.h> #include <linux/cciss_ioctl.h> #include <linux/string.h> @@ -54,8 +55,11 @@ #include "hpsa_cmd.h" #include "hpsa.h" -/* HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.' */ -#define HPSA_DRIVER_VERSION "3.4.10-0" +/* + * HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.' + * with an optional trailing '-' followed by a byte value (0-255). + */ +#define HPSA_DRIVER_VERSION "3.4.14-0" #define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")" #define HPSA "hpsa" @@ -205,6 +209,16 @@ static struct board_type products[] = { {0xFFFF103C, "Unknown Smart Array", &SA5_access}, }; +static struct scsi_transport_template *hpsa_sas_transport_template; +static int hpsa_add_sas_host(struct ctlr_info *h); +static void hpsa_delete_sas_host(struct ctlr_info *h); +static int hpsa_add_sas_device(struct hpsa_sas_node *hpsa_sas_node, + struct hpsa_scsi_dev_t *device); +static void hpsa_remove_sas_device(struct hpsa_scsi_dev_t *device); +static struct hpsa_scsi_dev_t + *hpsa_find_device_by_sas_rphy(struct ctlr_info *h, + struct sas_rphy *rphy); + #define SCSI_CMD_BUSY ((struct scsi_cmnd *)&hpsa_cmd_busy) static const struct scsi_cmnd hpsa_cmd_busy; #define SCSI_CMD_IDLE ((struct scsi_cmnd *)&hpsa_cmd_idle) @@ -230,6 +244,7 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, int cmd_type); static void hpsa_free_cmd_pool(struct ctlr_info *h); #define VPD_PAGE (1 << 8) +#define HPSA_SIMPLE_ERROR_BITS 0x03 static int hpsa_scsi_queue_command(struct Scsi_Host *h, struct scsi_cmnd *cmd); static void hpsa_scan_start(struct Scsi_Host *); @@ -243,7 +258,7 @@ static int hpsa_slave_alloc(struct scsi_device *sdev); static int hpsa_slave_configure(struct scsi_device *sdev); static void hpsa_slave_destroy(struct scsi_device *sdev); -static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno); +static void hpsa_update_scsi_devices(struct ctlr_info *h); static int check_for_unit_attention(struct ctlr_info *h, struct CommandList *c); static void check_ioctl_unit_attention(struct ctlr_info *h, @@ -274,7 +289,10 @@ static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h, static void hpsa_command_resubmit_worker(struct work_struct *work); static u32 lockup_detected(struct ctlr_info *h); static int detect_controller_lockup(struct ctlr_info *h); -static int is_ext_target(struct ctlr_info *h, struct hpsa_scsi_dev_t *device); +static void hpsa_disable_rld_caching(struct ctlr_info *h); +static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h, + struct ReportExtendedLUNdata *buf, int bufsize); +static int hpsa_luns_changed(struct ctlr_info *h); static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev) { @@ -606,7 +624,7 @@ static inline int is_logical_dev_addr_mode(unsigned char scsi3addr[]) } static const char * const raid_label[] = { "0", "4", "1(+0)", "5", "5+1", "6", - "1(+0)ADM", "UNKNOWN" + "1(+0)ADM", "UNKNOWN", "PHYS DRV" }; #define HPSA_RAID_0 0 #define HPSA_RAID_4 1 @@ -615,7 +633,13 @@ static const char * const raid_label[] = { "0", "4", "1(+0)", "5", "5+1", "6", #define HPSA_RAID_51 4 #define HPSA_RAID_6 5 /* also used for RAID 60 */ #define HPSA_RAID_ADM 6 /* also used for RAID 1+0 ADM */ -#define RAID_UNKNOWN (ARRAY_SIZE(raid_label) - 1) +#define RAID_UNKNOWN (ARRAY_SIZE(raid_label) - 2) +#define PHYSICAL_DRIVE (ARRAY_SIZE(raid_label) - 1) + +static inline bool is_logical_device(struct hpsa_scsi_dev_t *device) +{ + return !device->physical_device; +} static ssize_t raid_level_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -637,7 +661,7 @@ static ssize_t raid_level_show(struct device *dev, } /* Is this even a logical drive? */ - if (!is_logical_dev_addr_mode(hdev->scsi3addr)) { + if (!is_logical_device(hdev)) { spin_unlock_irqrestore(&h->lock, flags); l = snprintf(buf, PAGE_SIZE, "N/A\n"); return l; @@ -726,7 +750,6 @@ static ssize_t host_show_hp_ssd_smart_path_enabled(struct device *dev, } #define MAX_PATHS 8 -#define PATH_STRING_LEN 50 static ssize_t path_info_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -742,9 +765,7 @@ static ssize_t path_info_show(struct device *dev, u8 path_map_index = 0; char *active; unsigned char phys_connector[2]; - unsigned char path[MAX_PATHS][PATH_STRING_LEN]; - memset(path, 0, MAX_PATHS * PATH_STRING_LEN); sdev = to_scsi_device(dev); h = sdev_to_hba(sdev); spin_lock_irqsave(&h->devlock, flags); @@ -764,18 +785,19 @@ static ssize_t path_info_show(struct device *dev, else continue; - output_len = snprintf(path[i], - PATH_STRING_LEN, "[%d:%d:%d:%d] %20.20s ", + output_len += scnprintf(buf + output_len, + PAGE_SIZE - output_len, + "[%d:%d:%d:%d] %20.20s ", h->scsi_host->host_no, hdev->bus, hdev->target, hdev->lun, scsi_device_type(hdev->devtype)); - if (is_ext_target(h, hdev) || - (hdev->devtype == TYPE_RAID) || - is_logical_dev_addr_mode(hdev->scsi3addr)) { - output_len += snprintf(path[i] + output_len, - PATH_STRING_LEN, "%s\n", - active); + if (hdev->external || + hdev->devtype == TYPE_RAID || + is_logical_device(hdev)) { + output_len += snprintf(buf + output_len, + PAGE_SIZE - output_len, + "%s\n", active); continue; } @@ -787,36 +809,33 @@ static ssize_t path_info_show(struct device *dev, if (phys_connector[1] < '0') phys_connector[1] = '0'; if (hdev->phys_connector[i] > 0) - output_len += snprintf(path[i] + output_len, - PATH_STRING_LEN, + output_len += snprintf(buf + output_len, + PAGE_SIZE - output_len, "PORT: %.2s ", phys_connector); - if (hdev->devtype == TYPE_DISK && - hdev->expose_state != HPSA_DO_NOT_EXPOSE) { + if (hdev->devtype == TYPE_DISK && hdev->expose_device) { if (box == 0 || box == 0xFF) { - output_len += snprintf(path[i] + output_len, - PATH_STRING_LEN, + output_len += snprintf(buf + output_len, + PAGE_SIZE - output_len, "BAY: %hhu %s\n", bay, active); } else { - output_len += snprintf(path[i] + output_len, - PATH_STRING_LEN, + output_len += snprintf(buf + output_len, + PAGE_SIZE - output_len, "BOX: %hhu BAY: %hhu %s\n", box, bay, active); } } else if (box != 0 && box != 0xFF) { - output_len += snprintf(path[i] + output_len, - PATH_STRING_LEN, "BOX: %hhu %s\n", + output_len += snprintf(buf + output_len, + PAGE_SIZE - output_len, "BOX: %hhu %s\n", box, active); } else - output_len += snprintf(path[i] + output_len, - PATH_STRING_LEN, "%s\n", active); + output_len += snprintf(buf + output_len, + PAGE_SIZE - output_len, "%s\n", active); } spin_unlock_irqrestore(&h->devlock, flags); - return snprintf(buf, output_len+1, "%s%s%s%s%s%s%s%s", - path[0], path[1], path[2], path[3], - path[4], path[5], path[6], path[7]); + return output_len; } static DEVICE_ATTR(raid_level, S_IRUGO, raid_level_show, NULL); @@ -848,7 +867,6 @@ static struct device_attribute *hpsa_sdev_attrs[] = { &dev_attr_unique_id, &dev_attr_hp_ssd_smart_path_enabled, &dev_attr_path_info, - &dev_attr_lockup_detected, NULL, }; @@ -860,6 +878,7 @@ static struct device_attribute *hpsa_shost_attrs[] = { &dev_attr_resettable, &dev_attr_hp_ssd_smart_path_status, &dev_attr_raid_offload_debug, + &dev_attr_lockup_detected, NULL, }; @@ -1134,25 +1153,62 @@ static int hpsa_find_target_lun(struct ctlr_info *h, return !found; } -static inline void hpsa_show_dev_msg(const char *level, struct ctlr_info *h, +static void hpsa_show_dev_msg(const char *level, struct ctlr_info *h, struct hpsa_scsi_dev_t *dev, char *description) { +#define LABEL_SIZE 25 + char label[LABEL_SIZE]; + + if (h == NULL || h->pdev == NULL || h->scsi_host == NULL) + return; + + switch (dev->devtype) { + case TYPE_RAID: + snprintf(label, LABEL_SIZE, "controller"); + break; + case TYPE_ENCLOSURE: + snprintf(label, LABEL_SIZE, "enclosure"); + break; + case TYPE_DISK: + if (dev->external) + snprintf(label, LABEL_SIZE, "external"); + else if (!is_logical_dev_addr_mode(dev->scsi3addr)) + snprintf(label, LABEL_SIZE, "%s", + raid_label[PHYSICAL_DRIVE]); + else + snprintf(label, LABEL_SIZE, "RAID-%s", + dev->raid_level > RAID_UNKNOWN ? "?" : + raid_label[dev->raid_level]); + break; + case TYPE_ROM: + snprintf(label, LABEL_SIZE, "rom"); + break; + case TYPE_TAPE: + snprintf(label, LABEL_SIZE, "tape"); + break; + case TYPE_MEDIUM_CHANGER: + snprintf(label, LABEL_SIZE, "changer"); + break; + default: + snprintf(label, LABEL_SIZE, "UNKNOWN"); + break; + } + dev_printk(level, &h->pdev->dev, - "scsi %d:%d:%d:%d: %s %s %.8s %.16s RAID-%s SSDSmartPathCap%c En%c Exp=%d\n", + "scsi %d:%d:%d:%d: %s %s %.8s %.16s %s SSDSmartPathCap%c En%c Exp=%d\n", h->scsi_host->host_no, dev->bus, dev->target, dev->lun, description, scsi_device_type(dev->devtype), dev->vendor, dev->model, - dev->raid_level > RAID_UNKNOWN ? - "RAID-?" : raid_label[dev->raid_level], + label, dev->offload_config ? '+' : '-', dev->offload_enabled ? '+' : '-', - dev->expose_state); + dev->expose_device); } /* Add an entry into h->dev[] array. */ -static int hpsa_scsi_add_entry(struct ctlr_info *h, int hostno, +static int hpsa_scsi_add_entry(struct ctlr_info *h, struct hpsa_scsi_dev_t *device, struct hpsa_scsi_dev_t *added[], int *nadded) { @@ -1221,14 +1277,14 @@ lun_assigned: added[*nadded] = device; (*nadded)++; hpsa_show_dev_msg(KERN_INFO, h, device, - device->expose_state & HPSA_SCSI_ADD ? "added" : "masked"); + device->expose_device ? "added" : "masked"); device->offload_to_be_enabled = device->offload_enabled; device->offload_enabled = 0; return 0; } /* Update an entry in h->dev[] array. */ -static void hpsa_scsi_update_entry(struct ctlr_info *h, int hostno, +static void hpsa_scsi_update_entry(struct ctlr_info *h, int entry, struct hpsa_scsi_dev_t *new_entry) { int offload_enabled; @@ -1276,7 +1332,7 @@ static void hpsa_scsi_update_entry(struct ctlr_info *h, int hostno, } /* Replace an entry from h->dev[] array. */ -static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno, +static void hpsa_scsi_replace_entry(struct ctlr_info *h, int entry, struct hpsa_scsi_dev_t *new_entry, struct hpsa_scsi_dev_t *added[], int *nadded, struct hpsa_scsi_dev_t *removed[], int *nremoved) @@ -1304,7 +1360,7 @@ static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno, } /* Remove an entry from h->dev[] array. */ -static void hpsa_scsi_remove_entry(struct ctlr_info *h, int hostno, int entry, +static void hpsa_scsi_remove_entry(struct ctlr_info *h, int entry, struct hpsa_scsi_dev_t *removed[], int *nremoved) { /* assumes h->devlock is held */ @@ -1415,6 +1471,9 @@ static int hpsa_scsi_find_entry(struct hpsa_scsi_dev_t *needle, #define DEVICE_CHANGED 1 #define DEVICE_SAME 2 #define DEVICE_UPDATED 3 + if (needle == NULL) + return DEVICE_NOT_FOUND; + for (i = 0; i < haystack_size; i++) { if (haystack[i] == NULL) /* previously removed. */ continue; @@ -1577,9 +1636,11 @@ static void hpsa_figure_phys_disk_ptrs(struct ctlr_info *h, if (!logical_drive->offload_config) continue; for (j = 0; j < ndevices; j++) { + if (dev[j] == NULL) + continue; if (dev[j]->devtype != TYPE_DISK) continue; - if (is_logical_dev_addr_mode(dev[j]->scsi3addr)) + if (is_logical_device(dev[j])) continue; if (dev[j]->ioaccel_handle != dd[i].ioaccel_handle) continue; @@ -1620,9 +1681,11 @@ static void hpsa_update_log_drive_phys_drive_ptrs(struct ctlr_info *h, int i; for (i = 0; i < ndevices; i++) { + if (dev[i] == NULL) + continue; if (dev[i]->devtype != TYPE_DISK) continue; - if (!is_logical_dev_addr_mode(dev[i]->scsi3addr)) + if (!is_logical_device(dev[i])) continue; /* @@ -1638,7 +1701,50 @@ static void hpsa_update_log_drive_phys_drive_ptrs(struct ctlr_info *h, } } -static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno, +static int hpsa_add_device(struct ctlr_info *h, struct hpsa_scsi_dev_t *device) +{ + int rc = 0; + + if (!h->scsi_host) + return 1; + + if (is_logical_device(device)) /* RAID */ + rc = scsi_add_device(h->scsi_host, device->bus, + device->target, device->lun); + else /* HBA */ + rc = hpsa_add_sas_device(h->sas_host, device); + + return rc; +} + +static void hpsa_remove_device(struct ctlr_info *h, + struct hpsa_scsi_dev_t *device) +{ + struct scsi_device *sdev = NULL; + + if (!h->scsi_host) + return; + + if (is_logical_device(device)) { /* RAID */ + sdev = scsi_device_lookup(h->scsi_host, device->bus, + device->target, device->lun); + if (sdev) { + scsi_remove_device(sdev); + scsi_device_put(sdev); + } else { + /* + * We don't expect to get here. Future commands + * to this device will get a selection timeout as + * if the device were gone. + */ + hpsa_show_dev_msg(KERN_WARNING, h, device, + "didn't find device for removal."); + } + } else /* HBA */ + hpsa_remove_sas_device(device); +} + +static void adjust_hpsa_scsi_table(struct ctlr_info *h, struct hpsa_scsi_dev_t *sd[], int nsds) { /* sd contains scsi3 addresses and devtypes, and inquiry @@ -1650,7 +1756,15 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno, unsigned long flags; struct hpsa_scsi_dev_t **added, **removed; int nadded, nremoved; - struct Scsi_Host *sh = NULL; + + /* + * A reset can cause a device status to change + * re-schedule the scan to see what happened. + */ + if (h->reset_in_progress) { + h->drv_req_rescan = 1; + return; + } added = kzalloc(sizeof(*added) * HPSA_MAX_DEVICES, GFP_KERNEL); removed = kzalloc(sizeof(*removed) * HPSA_MAX_DEVICES, GFP_KERNEL); @@ -1678,19 +1792,18 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno, device_change = hpsa_scsi_find_entry(csd, sd, nsds, &entry); if (device_change == DEVICE_NOT_FOUND) { changes++; - hpsa_scsi_remove_entry(h, hostno, i, - removed, &nremoved); + hpsa_scsi_remove_entry(h, i, removed, &nremoved); continue; /* remove ^^^, hence i not incremented */ } else if (device_change == DEVICE_CHANGED) { changes++; - hpsa_scsi_replace_entry(h, hostno, i, sd[entry], + hpsa_scsi_replace_entry(h, i, sd[entry], added, &nadded, removed, &nremoved); /* Set it to NULL to prevent it from being freed * at the bottom of hpsa_update_scsi_devices() */ sd[entry] = NULL; } else if (device_change == DEVICE_UPDATED) { - hpsa_scsi_update_entry(h, hostno, i, sd[entry]); + hpsa_scsi_update_entry(h, i, sd[entry]); } i++; } @@ -1718,8 +1831,7 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno, h->ndevices, &entry); if (device_change == DEVICE_NOT_FOUND) { changes++; - if (hpsa_scsi_add_entry(h, hostno, sd[i], - added, &nadded) != 0) + if (hpsa_scsi_add_entry(h, sd[i], added, &nadded) != 0) break; sd[i] = NULL; /* prevent from being freed later. */ } else if (device_change == DEVICE_CHANGED) { @@ -1735,8 +1847,11 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno, /* Now that h->dev[]->phys_disk[] is coherent, we can enable * any logical drives that need it enabled. */ - for (i = 0; i < h->ndevices; i++) + for (i = 0; i < h->ndevices; i++) { + if (h->dev[i] == NULL) + continue; h->dev[i]->offload_enabled = h->dev[i]->offload_to_be_enabled; + } spin_unlock_irqrestore(&h->devlock, flags); @@ -1755,47 +1870,37 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno, * (or if there are no changes) scsi_scan_host will do it later the * first time through. */ - if (hostno == -1 || !changes) + if (!changes) goto free_and_out; - sh = h->scsi_host; /* Notify scsi mid layer of any removed devices */ for (i = 0; i < nremoved; i++) { - if (removed[i]->expose_state & HPSA_SCSI_ADD) { - struct scsi_device *sdev = - scsi_device_lookup(sh, removed[i]->bus, - removed[i]->target, removed[i]->lun); - if (sdev != NULL) { - scsi_remove_device(sdev); - scsi_device_put(sdev); - } else { - /* - * We don't expect to get here. - * future cmds to this device will get selection - * timeout as if the device was gone. - */ - hpsa_show_dev_msg(KERN_WARNING, h, removed[i], - "didn't find device for removal."); - } - } + if (removed[i] == NULL) + continue; + if (removed[i]->expose_device) + hpsa_remove_device(h, removed[i]); kfree(removed[i]); removed[i] = NULL; } /* Notify scsi mid layer of any added devices */ for (i = 0; i < nadded; i++) { - if (!(added[i]->expose_state & HPSA_SCSI_ADD)) + int rc = 0; + + if (added[i] == NULL) continue; - if (scsi_add_device(sh, added[i]->bus, - added[i]->target, added[i]->lun) == 0) + if (!(added[i]->expose_device)) + continue; + rc = hpsa_add_device(h, added[i]); + if (!rc) continue; - hpsa_show_dev_msg(KERN_WARNING, h, added[i], - "addition failed, device not added."); + dev_warn(&h->pdev->dev, + "addition failed %d, device not added.", rc); /* now we have to remove it from h->dev, * since it didn't get added to scsi mid layer */ fixup_botched_add(h, added[i]); - added[i] = NULL; + h->drv_req_rescan = 1; } free_and_out: @@ -1829,11 +1934,24 @@ static int hpsa_slave_alloc(struct scsi_device *sdev) h = sdev_to_hba(sdev); spin_lock_irqsave(&h->devlock, flags); - sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev), - sdev_id(sdev), sdev->lun); - if (likely(sd)) { + if (sdev_channel(sdev) == HPSA_PHYSICAL_DEVICE_BUS) { + struct scsi_target *starget; + struct sas_rphy *rphy; + + starget = scsi_target(sdev); + rphy = target_to_rphy(starget); + sd = hpsa_find_device_by_sas_rphy(h, rphy); + if (sd) { + sd->target = sdev_id(sdev); + sd->lun = sdev->lun; + } + } else + sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev), + sdev_id(sdev), sdev->lun); + + if (sd && sd->expose_device) { atomic_set(&sd->ioaccel_cmds_out, 0); - sdev->hostdata = (sd->expose_state & HPSA_SCSI_ADD) ? sd : NULL; + sdev->hostdata = sd; } else sdev->hostdata = NULL; spin_unlock_irqrestore(&h->devlock, flags); @@ -1847,7 +1965,7 @@ static int hpsa_slave_configure(struct scsi_device *sdev) int queue_depth; sd = sdev->hostdata; - sdev->no_uld_attach = !sd || !(sd->expose_state & HPSA_ULD_ATTACH); + sdev->no_uld_attach = !sd || !sd->expose_device; if (sd) queue_depth = sd->queue_depth != 0 ? @@ -1955,7 +2073,7 @@ static int hpsa_map_ioaccel2_sg_chain_block(struct ctlr_info *h, u32 chain_size; chain_block = h->ioaccel2_cmd_sg_list[c->cmdindex]; - chain_size = le32_to_cpu(cp->data_len); + chain_size = le32_to_cpu(cp->sg[0].length); temp64 = pci_map_single(h->pdev, chain_block, chain_size, PCI_DMA_TODEVICE); if (dma_mapping_error(&h->pdev->dev, temp64)) { @@ -1976,7 +2094,7 @@ static void hpsa_unmap_ioaccel2_sg_chain_block(struct ctlr_info *h, chain_sg = cp->sg; temp64 = le64_to_cpu(chain_sg->address); - chain_size = le32_to_cpu(cp->data_len); + chain_size = le32_to_cpu(cp->sg[0].length); pci_unmap_single(h->pdev, temp64, chain_size, PCI_DMA_TODEVICE); } @@ -2210,7 +2328,7 @@ static void process_ioaccel2_completion(struct ctlr_info *h, * the normal I/O path so the controller can handle whatever's * wrong. */ - if (is_logical_dev_addr_mode(dev->scsi3addr) && + if (is_logical_device(dev) && c2->error_data.serv_response == IOACCEL2_SERV_RESPONSE_FAILURE) { if (c2->error_data.status == @@ -2330,7 +2448,7 @@ static void complete_scsi_command(struct CommandList *cp) * the normal I/O path so the controller can handle whatever's * wrong. */ - if (is_logical_dev_addr_mode(dev->scsi3addr)) { + if (is_logical_device(dev)) { if (ei->CommandStatus == CMD_IOACCEL_DISABLED) dev->offload_enabled = 0; return hpsa_retry_cmd(h, cp); @@ -2709,9 +2827,8 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr, /* fill_cmd can't fail here, no data buffer to map. */ - (void) fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0, + (void) fill_cmd(c, reset_type, h, NULL, 0, 0, scsi3addr, TYPE_MSG); - c->Request.CDB[1] = reset_type; /* fill_cmd defaults to LUN reset */ rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT); if (rc) { dev_warn(&h->pdev->dev, "Failed to send reset command\n"); @@ -2984,6 +3101,66 @@ out: return rc; } +static int hpsa_bmic_sense_subsystem_information(struct ctlr_info *h, + unsigned char scsi3addr[], u16 bmic_device_index, + struct bmic_sense_subsystem_info *buf, size_t bufsize) +{ + int rc = IO_OK; + struct CommandList *c; + struct ErrorInfo *ei; + + c = cmd_alloc(h); + + rc = fill_cmd(c, BMIC_SENSE_SUBSYSTEM_INFORMATION, h, buf, bufsize, + 0, RAID_CTLR_LUNID, TYPE_CMD); + if (rc) + goto out; + + c->Request.CDB[2] = bmic_device_index & 0xff; + c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff; + + rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, + PCI_DMA_FROMDEVICE, NO_TIMEOUT); + if (rc) + goto out; + ei = c->err_info; + if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { + hpsa_scsi_interpret_error(h, c); + rc = -1; + } +out: + cmd_free(h, c); + return rc; +} + +static int hpsa_bmic_id_controller(struct ctlr_info *h, + struct bmic_identify_controller *buf, size_t bufsize) +{ + int rc = IO_OK; + struct CommandList *c; + struct ErrorInfo *ei; + + c = cmd_alloc(h); + + rc = fill_cmd(c, BMIC_IDENTIFY_CONTROLLER, h, buf, bufsize, + 0, RAID_CTLR_LUNID, TYPE_CMD); + if (rc) + goto out; + + rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, + PCI_DMA_FROMDEVICE, NO_TIMEOUT); + if (rc) + goto out; + ei = c->err_info; + if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { + hpsa_scsi_interpret_error(h, c); + rc = -1; + } +out: + cmd_free(h, c); + return rc; +} + static int hpsa_bmic_id_physical_device(struct ctlr_info *h, unsigned char scsi3addr[], u16 bmic_device_index, struct bmic_identify_physical_device *buf, size_t bufsize) @@ -3010,9 +3187,71 @@ static int hpsa_bmic_id_physical_device(struct ctlr_info *h, } out: cmd_free(h, c); + return rc; } +static u64 hpsa_get_sas_address_from_report_physical(struct ctlr_info *h, + unsigned char *scsi3addr) +{ + struct ReportExtendedLUNdata *physdev; + u32 nphysicals; + u64 sa = 0; + int i; + + physdev = kzalloc(sizeof(*physdev), GFP_KERNEL); + if (!physdev) + return 0; + + if (hpsa_scsi_do_report_phys_luns(h, physdev, sizeof(*physdev))) { + dev_err(&h->pdev->dev, "report physical LUNs failed.\n"); + kfree(physdev); + return 0; + } + nphysicals = get_unaligned_be32(physdev->LUNListLength) / 24; + + for (i = 0; i < nphysicals; i++) + if (!memcmp(&physdev->LUN[i].lunid[0], scsi3addr, 8)) { + sa = get_unaligned_be64(&physdev->LUN[i].wwid[0]); + break; + } + + kfree(physdev); + + return sa; +} + +static void hpsa_get_sas_address(struct ctlr_info *h, unsigned char *scsi3addr, + struct hpsa_scsi_dev_t *dev) +{ + int rc; + u64 sa = 0; + + if (is_hba_lunid(scsi3addr)) { + struct bmic_sense_subsystem_info *ssi; + + ssi = kzalloc(sizeof(*ssi), GFP_KERNEL); + if (ssi == NULL) { + dev_warn(&h->pdev->dev, + "%s: out of memory\n", __func__); + return; + } + + rc = hpsa_bmic_sense_subsystem_information(h, + scsi3addr, 0, ssi, sizeof(*ssi)); + if (rc == 0) { + sa = get_unaligned_be64(ssi->primary_world_wide_id); + h->sas_address = sa; + } + + kfree(ssi); + } else + sa = hpsa_get_sas_address_from_report_physical(h, scsi3addr); + + dev->sas_address = sa; +} + +/* Get a device id from inquiry page 0x83 */ static int hpsa_vpd_page_supported(struct ctlr_info *h, unsigned char scsi3addr[], u8 page) { @@ -3097,7 +3336,7 @@ out: /* Get the device id from inquiry page 0x83 */ static int hpsa_get_device_id(struct ctlr_info *h, unsigned char *scsi3addr, - unsigned char *device_id, int buflen) + unsigned char *device_id, int index, int buflen) { int rc; unsigned char *buf; @@ -3109,8 +3348,10 @@ static int hpsa_get_device_id(struct ctlr_info *h, unsigned char *scsi3addr, return -ENOMEM; rc = hpsa_scsi_do_inquiry(h, scsi3addr, VPD_PAGE | 0x83, buf, 64); if (rc == 0) - memcpy(device_id, &buf[8], buflen); + memcpy(device_id, &buf[index], buflen); + kfree(buf); + return rc != 0; } @@ -3339,6 +3580,18 @@ static int hpsa_device_supports_aborts(struct ctlr_info *h, return rc; } +static void sanitize_inquiry_string(unsigned char *s, int len) +{ + bool terminated = false; + + for (; len > 0; (--len, ++s)) { + if (*s == 0) + terminated = true; + if (terminated || *s < 0x20 || *s > 0x7e) + *s = ' '; + } +} + static int hpsa_update_device_info(struct ctlr_info *h, unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device, unsigned char *is_OBDR_device) @@ -3351,10 +3604,13 @@ static int hpsa_update_device_info(struct ctlr_info *h, unsigned char *inq_buff; unsigned char *obdr_sig; + int rc = 0; inq_buff = kzalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL); - if (!inq_buff) + if (!inq_buff) { + rc = -ENOMEM; goto bail_out; + } /* Do an inquiry to the device to see what it is. */ if (hpsa_scsi_do_inquiry(h, scsi3addr, 0, inq_buff, @@ -3362,9 +3618,13 @@ static int hpsa_update_device_info(struct ctlr_info *h, /* Inquiry failed (msg printed already) */ dev_err(&h->pdev->dev, "hpsa_update_device_info: inquiry failed\n"); + rc = -EIO; goto bail_out; } + sanitize_inquiry_string(&inq_buff[8], 8); + sanitize_inquiry_string(&inq_buff[16], 16); + this_device->devtype = (inq_buff[0] & 0x1f); memcpy(this_device->scsi3addr, scsi3addr, 8); memcpy(this_device->vendor, &inq_buff[8], @@ -3373,7 +3633,7 @@ static int hpsa_update_device_info(struct ctlr_info *h, sizeof(this_device->model)); memset(this_device->device_id, 0, sizeof(this_device->device_id)); - hpsa_get_device_id(h, scsi3addr, this_device->device_id, + hpsa_get_device_id(h, scsi3addr, this_device->device_id, 8, sizeof(this_device->device_id)); if (this_device->devtype == TYPE_DISK && @@ -3411,7 +3671,7 @@ static int hpsa_update_device_info(struct ctlr_info *h, bail_out: kfree(inq_buff); - return 1; + return rc; } static void hpsa_update_device_supports_aborts(struct ctlr_info *h, @@ -3439,115 +3699,39 @@ static void hpsa_update_device_supports_aborts(struct ctlr_info *h, } } -static unsigned char *ext_target_model[] = { - "MSA2012", - "MSA2024", - "MSA2312", - "MSA2324", - "P2000 G3 SAS", - "MSA 2040 SAS", - NULL, -}; - -static int is_ext_target(struct ctlr_info *h, struct hpsa_scsi_dev_t *device) -{ - int i; - - for (i = 0; ext_target_model[i]; i++) - if (strncmp(device->model, ext_target_model[i], - strlen(ext_target_model[i])) == 0) - return 1; - return 0; -} - -/* Helper function to assign bus, target, lun mapping of devices. - * Puts non-external target logical volumes on bus 0, external target logical - * volumes on bus 1, physical devices on bus 2. and the hba on bus 3. +/* + * Helper function to assign bus, target, lun mapping of devices. * Logical drive target and lun are assigned at this time, but * physical device lun and target assignment are deferred (assigned * in hpsa_find_target_lun, called by hpsa_scsi_add_entry.) - */ +*/ static void figure_bus_target_lun(struct ctlr_info *h, u8 *lunaddrbytes, struct hpsa_scsi_dev_t *device) { - u32 lunid = le32_to_cpu(*((__le32 *) lunaddrbytes)); + u32 lunid = get_unaligned_le32(lunaddrbytes); if (!is_logical_dev_addr_mode(lunaddrbytes)) { /* physical device, target and lun filled in later */ if (is_hba_lunid(lunaddrbytes)) - hpsa_set_bus_target_lun(device, 3, 0, lunid & 0x3fff); + hpsa_set_bus_target_lun(device, + HPSA_HBA_BUS, 0, lunid & 0x3fff); else /* defer target, lun assignment for physical devices */ - hpsa_set_bus_target_lun(device, 2, -1, -1); + hpsa_set_bus_target_lun(device, + HPSA_PHYSICAL_DEVICE_BUS, -1, -1); return; } /* It's a logical device */ - if (is_ext_target(h, device)) { - /* external target way, put logicals on bus 1 - * and match target/lun numbers box - * reports, other smart array, bus 0, target 0, match lunid - */ + if (device->external) { hpsa_set_bus_target_lun(device, - 1, (lunid >> 16) & 0x3fff, lunid & 0x00ff); + HPSA_EXTERNAL_RAID_VOLUME_BUS, (lunid >> 16) & 0x3fff, + lunid & 0x00ff); return; } - hpsa_set_bus_target_lun(device, 0, 0, lunid & 0x3fff); + hpsa_set_bus_target_lun(device, HPSA_RAID_VOLUME_BUS, + 0, lunid & 0x3fff); } -/* - * If there is no lun 0 on a target, linux won't find any devices. - * For the external targets (arrays), we have to manually detect the enclosure - * which is at lun zero, as CCISS_REPORT_PHYSICAL_LUNS doesn't report - * it for some reason. *tmpdevice is the target we're adding, - * this_device is a pointer into the current element of currentsd[] - * that we're building up in update_scsi_devices(), below. - * lunzerobits is a bitmap that tracks which targets already have a - * lun 0 assigned. - * Returns 1 if an enclosure was added, 0 if not. - */ -static int add_ext_target_dev(struct ctlr_info *h, - struct hpsa_scsi_dev_t *tmpdevice, - struct hpsa_scsi_dev_t *this_device, u8 *lunaddrbytes, - unsigned long lunzerobits[], int *n_ext_target_devs) -{ - unsigned char scsi3addr[8]; - - if (test_bit(tmpdevice->target, lunzerobits)) - return 0; /* There is already a lun 0 on this target. */ - - if (!is_logical_dev_addr_mode(lunaddrbytes)) - return 0; /* It's the logical targets that may lack lun 0. */ - - if (!is_ext_target(h, tmpdevice)) - return 0; /* Only external target devices have this problem. */ - - if (tmpdevice->lun == 0) /* if lun is 0, then we have a lun 0. */ - return 0; - - memset(scsi3addr, 0, 8); - scsi3addr[3] = tmpdevice->target; - if (is_hba_lunid(scsi3addr)) - return 0; /* Don't add the RAID controller here. */ - - if (is_scsi_rev_5(h)) - return 0; /* p1210m doesn't need to do this. */ - - if (*n_ext_target_devs >= MAX_EXT_TARGETS) { - dev_warn(&h->pdev->dev, "Maximum number of external " - "target devices exceeded. Check your hardware " - "configuration."); - return 0; - } - - if (hpsa_update_device_info(h, scsi3addr, this_device, NULL)) - return 0; - (*n_ext_target_devs)++; - hpsa_set_bus_target_lun(this_device, - tmpdevice->bus, tmpdevice->target, 0); - hpsa_update_device_supports_aborts(h, this_device, scsi3addr); - set_bit(tmpdevice->target, lunzerobits); - return 1; -} /* * Get address of physical disk used for an ioaccel2 mode command: @@ -3577,6 +3761,27 @@ static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h, return 0; } +static int figure_external_status(struct ctlr_info *h, int raid_ctlr_position, + int i, int nphysicals, int nlocal_logicals) +{ + /* In report logicals, local logicals are listed first, + * then any externals. + */ + int logicals_start = nphysicals + (raid_ctlr_position == 0); + + if (i == raid_ctlr_position) + return 0; + + if (i < logicals_start) + return 0; + + /* i is in logicals range, but still within local logicals */ + if ((i - nphysicals - (raid_ctlr_position == 0)) < nlocal_logicals) + return 0; + + return 1; /* it's an external lun */ +} + /* * Do CISS_REPORT_PHYS and CISS_REPORT_LOG. Data is returned in physdev, * logdev. The number of luns in physdev and logdev are returned in @@ -3650,19 +3855,18 @@ static u8 *figure_lunaddrbytes(struct ctlr_info *h, int raid_ctlr_position, /* get physical drive ioaccel handle and queue depth */ static void hpsa_get_ioaccel_drive_info(struct ctlr_info *h, struct hpsa_scsi_dev_t *dev, - u8 *lunaddrbytes, + struct ReportExtendedLUNdata *rlep, int rle_index, struct bmic_identify_physical_device *id_phys) { int rc; - struct ext_report_lun_entry *rle = - (struct ext_report_lun_entry *) lunaddrbytes; + struct ext_report_lun_entry *rle = &rlep->LUN[rle_index]; dev->ioaccel_handle = rle->ioaccel_handle; - if (PHYS_IOACCEL(lunaddrbytes) && dev->ioaccel_handle) + if ((rle->device_flags & 0x08) && dev->ioaccel_handle) dev->hba_ioaccel_enabled = 1; memset(id_phys, 0, sizeof(*id_phys)); - rc = hpsa_bmic_id_physical_device(h, lunaddrbytes, - GET_BMIC_DRIVE_NUMBER(lunaddrbytes), id_phys, + rc = hpsa_bmic_id_physical_device(h, &rle->lunid[0], + GET_BMIC_DRIVE_NUMBER(&rle->lunid[0]), id_phys, sizeof(*id_phys)); if (!rc) /* Reserve space for FW operations */ @@ -3673,16 +3877,15 @@ static void hpsa_get_ioaccel_drive_info(struct ctlr_info *h, DRIVE_CMDS_RESERVED_FOR_FW; else dev->queue_depth = DRIVE_QUEUE_DEPTH; /* conservative */ - atomic_set(&dev->ioaccel_cmds_out, 0); - atomic_set(&dev->reset_cmds_out, 0); } static void hpsa_get_path_info(struct hpsa_scsi_dev_t *this_device, - u8 *lunaddrbytes, + struct ReportExtendedLUNdata *rlep, int rle_index, struct bmic_identify_physical_device *id_phys) { - if (PHYS_IOACCEL(lunaddrbytes) - && this_device->ioaccel_handle) + struct ext_report_lun_entry *rle = &rlep->LUN[rle_index]; + + if ((rle->device_flags & 0x08) && this_device->ioaccel_handle) this_device->hba_ioaccel_enabled = 1; memcpy(&this_device->active_path_index, @@ -3702,7 +3905,33 @@ static void hpsa_get_path_info(struct hpsa_scsi_dev_t *this_device, sizeof(this_device->bay)); } -static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) +/* get number of local logical disks. */ +static int hpsa_set_local_logical_count(struct ctlr_info *h, + struct bmic_identify_controller *id_ctlr, + u32 *nlocals) +{ + int rc; + + if (!id_ctlr) { + dev_warn(&h->pdev->dev, "%s: id_ctlr buffer is NULL.\n", + __func__); + return -ENOMEM; + } + memset(id_ctlr, 0, sizeof(*id_ctlr)); + rc = hpsa_bmic_id_controller(h, id_ctlr, sizeof(*id_ctlr)); + if (!rc) + if (id_ctlr->configured_logical_drive_count < 256) + *nlocals = id_ctlr->configured_logical_drive_count; + else + *nlocals = le16_to_cpu( + id_ctlr->extended_logical_unit_count); + else + *nlocals = -1; + return rc; +} + + +static void hpsa_update_scsi_devices(struct ctlr_info *h) { /* the idea here is we could get notified * that some devices have changed, so we do a report @@ -3717,13 +3946,16 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) struct ReportExtendedLUNdata *physdev_list = NULL; struct ReportLUNdata *logdev_list = NULL; struct bmic_identify_physical_device *id_phys = NULL; + struct bmic_identify_controller *id_ctlr = NULL; u32 nphysicals = 0; u32 nlogicals = 0; + u32 nlocal_logicals = 0; u32 ndev_allocated = 0; struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice; int ncurrent = 0; int i, n_ext_target_devs, ndevs_to_allocate; int raid_ctlr_position; + bool physical_device; DECLARE_BITMAP(lunzerobits, MAX_EXT_TARGETS); currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_DEVICES, GFP_KERNEL); @@ -3731,17 +3963,29 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) logdev_list = kzalloc(sizeof(*logdev_list), GFP_KERNEL); tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL); id_phys = kzalloc(sizeof(*id_phys), GFP_KERNEL); + id_ctlr = kzalloc(sizeof(*id_ctlr), GFP_KERNEL); if (!currentsd || !physdev_list || !logdev_list || - !tmpdevice || !id_phys) { + !tmpdevice || !id_phys || !id_ctlr) { dev_err(&h->pdev->dev, "out of memory\n"); goto out; } memset(lunzerobits, 0, sizeof(lunzerobits)); + h->drv_req_rescan = 0; /* cancel scheduled rescan - we're doing it. */ + if (hpsa_gather_lun_info(h, physdev_list, &nphysicals, - logdev_list, &nlogicals)) + logdev_list, &nlogicals)) { + h->drv_req_rescan = 1; goto out; + } + + /* Set number of local logicals (non PTRAID) */ + if (hpsa_set_local_logical_count(h, id_ctlr, &nlocal_logicals)) { + dev_warn(&h->pdev->dev, + "%s: Can't determine number of local logical devices.\n", + __func__); + } /* We might see up to the maximum number of logical and physical disks * plus external target devices, and a device for the local RAID @@ -3762,6 +4006,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) if (!currentsd[i]) { dev_warn(&h->pdev->dev, "out of memory at %s:%d\n", __FILE__, __LINE__); + h->drv_req_rescan = 1; goto out; } ndev_allocated++; @@ -3776,49 +4021,74 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) n_ext_target_devs = 0; for (i = 0; i < nphysicals + nlogicals + 1; i++) { u8 *lunaddrbytes, is_OBDR = 0; + int rc = 0; + int phys_dev_index = i - (raid_ctlr_position == 0); + + physical_device = i < nphysicals + (raid_ctlr_position == 0); /* Figure out where the LUN ID info is coming from */ lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position, i, nphysicals, nlogicals, physdev_list, logdev_list); /* skip masked non-disk devices */ - if (MASKED_DEVICE(lunaddrbytes)) - if (i < nphysicals + (raid_ctlr_position == 0) && - NON_DISK_PHYS_DEV(lunaddrbytes)) - continue; + if (MASKED_DEVICE(lunaddrbytes) && physical_device && + (physdev_list->LUN[phys_dev_index].device_flags & 0x01)) + continue; /* Get device type, vendor, model, device id */ - if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice, - &is_OBDR)) - continue; /* skip it if we can't talk to it. */ + rc = hpsa_update_device_info(h, lunaddrbytes, tmpdevice, + &is_OBDR); + if (rc == -ENOMEM) { + dev_warn(&h->pdev->dev, + "Out of memory, rescan deferred.\n"); + h->drv_req_rescan = 1; + goto out; + } + if (rc) { + dev_warn(&h->pdev->dev, + "Inquiry failed, skipping device.\n"); + continue; + } + + /* Determine if this is a lun from an external target array */ + tmpdevice->external = + figure_external_status(h, raid_ctlr_position, i, + nphysicals, nlocal_logicals); + figure_bus_target_lun(h, lunaddrbytes, tmpdevice); hpsa_update_device_supports_aborts(h, tmpdevice, lunaddrbytes); this_device = currentsd[ncurrent]; - /* - * For external target devices, we have to insert a LUN 0 which - * doesn't show up in CCISS_REPORT_PHYSICAL data, but there - * is nonetheless an enclosure device there. We have to - * present that otherwise linux won't find anything if - * there is no lun 0. + /* Turn on discovery_polling if there are ext target devices. + * Event-based change notification is unreliable for those. */ - if (add_ext_target_dev(h, tmpdevice, this_device, - lunaddrbytes, lunzerobits, - &n_ext_target_devs)) { - ncurrent++; - this_device = currentsd[ncurrent]; + if (!h->discovery_polling) { + if (tmpdevice->external) { + h->discovery_polling = 1; + dev_info(&h->pdev->dev, + "External target, activate discovery polling.\n"); + } } + *this_device = *tmpdevice; + this_device->physical_device = physical_device; - /* do not expose masked devices */ - if (MASKED_DEVICE(lunaddrbytes) && - i < nphysicals + (raid_ctlr_position == 0)) { - this_device->expose_state = HPSA_DO_NOT_EXPOSE; - } else { - this_device->expose_state = - HPSA_SG_ATTACH | HPSA_ULD_ATTACH; - } + /* + * Expose all devices except for physical devices that + * are masked. + */ + if (MASKED_DEVICE(lunaddrbytes) && this_device->physical_device) + this_device->expose_device = 0; + else + this_device->expose_device = 1; + + + /* + * Get the SAS address for physical devices that are exposed. + */ + if (this_device->physical_device && this_device->expose_device) + hpsa_get_sas_address(h, lunaddrbytes, this_device); switch (this_device->devtype) { case TYPE_ROM: @@ -3833,14 +4103,14 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) ncurrent++; break; case TYPE_DISK: - if (i < nphysicals + (raid_ctlr_position == 0)) { + if (this_device->physical_device) { /* The disk is in HBA mode. */ /* Never use RAID mapper in HBA mode. */ this_device->offload_enabled = 0; hpsa_get_ioaccel_drive_info(h, this_device, - lunaddrbytes, id_phys); - hpsa_get_path_info(this_device, lunaddrbytes, - id_phys); + physdev_list, phys_dev_index, id_phys); + hpsa_get_path_info(this_device, + physdev_list, phys_dev_index, id_phys); } ncurrent++; break; @@ -3865,7 +4135,19 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) if (ncurrent >= HPSA_MAX_DEVICES) break; } - adjust_hpsa_scsi_table(h, hostno, currentsd, ncurrent); + + if (h->sas_host == NULL) { + int rc = 0; + + rc = hpsa_add_sas_host(h); + if (rc) { + dev_warn(&h->pdev->dev, + "Could not add sas host %d\n", rc); + goto out; + } + } + + adjust_hpsa_scsi_table(h, currentsd, ncurrent); out: kfree(tmpdevice); for (i = 0; i < ndev_allocated; i++) @@ -3873,6 +4155,7 @@ out: kfree(currentsd); kfree(physdev_list); kfree(logdev_list); + kfree(id_ctlr); kfree(id_phys); } @@ -3978,19 +4261,14 @@ static int fixup_ioaccel_cdb(u8 *cdb, int *cdb_len) case READ_6: case READ_12: if (*cdb_len == 6) { - block = (((u32) cdb[2]) << 8) | cdb[3]; + block = get_unaligned_be16(&cdb[2]); block_cnt = cdb[4]; + if (block_cnt == 0) + block_cnt = 256; } else { BUG_ON(*cdb_len != 12); - block = (((u32) cdb[2]) << 24) | - (((u32) cdb[3]) << 16) | - (((u32) cdb[4]) << 8) | - cdb[5]; - block_cnt = - (((u32) cdb[6]) << 24) | - (((u32) cdb[7]) << 16) | - (((u32) cdb[8]) << 8) | - cdb[9]; + block = get_unaligned_be32(&cdb[2]); + block_cnt = get_unaligned_be32(&cdb[6]); } if (block_cnt > 0xffff) return IO_ACCEL_INELIGIBLE; @@ -4272,6 +4550,7 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h, /* fill in sg elements */ if (use_sg > h->ioaccel_maxsg) { cp->sg_count = 1; + cp->sg[0].length = cpu_to_le32(use_sg * sizeof(cp->sg[0])); if (hpsa_map_ioaccel2_sg_chain_block(h, cp, c)) { atomic_dec(&phys_disk->ioaccel_cmds_out); scsi_dma_unmap(cmd); @@ -4376,9 +4655,7 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h, case WRITE_6: is_write = 1; case READ_6: - first_block = - (((u64) cmd->cmnd[2]) << 8) | - cmd->cmnd[3]; + first_block = get_unaligned_be16(&cmd->cmnd[2]); block_cnt = cmd->cmnd[4]; if (block_cnt == 0) block_cnt = 256; @@ -4947,7 +5224,7 @@ static void hpsa_scan_start(struct Scsi_Host *sh) if (unlikely(lockup_detected(h))) return hpsa_scan_complete(h); - hpsa_update_scsi_devices(h, h->scsi_host->host_no); + hpsa_update_scsi_devices(h); hpsa_scan_complete(h); } @@ -5000,6 +5277,7 @@ static int hpsa_scsi_host_alloc(struct ctlr_info *h) sh->can_queue = h->nr_cmds - HPSA_NRESERVED_CMDS; sh->cmd_per_lun = sh->can_queue; sh->sg_tablesize = h->maxsgentries; + sh->transportt = hpsa_sas_transport_template; sh->hostdata[0] = (unsigned long) h; sh->irq = h->intr[h->intr_mode]; sh->unique_id = sh->irq; @@ -5159,6 +5437,7 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd) int rc; struct ctlr_info *h; struct hpsa_scsi_dev_t *dev; + u8 reset_type; char msg[48]; /* find the controller to which the command to be aborted was sent */ @@ -5197,14 +5476,25 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd) if (is_hba_lunid(dev->scsi3addr)) return SUCCESS; - hpsa_show_dev_msg(KERN_WARNING, h, dev, "resetting"); + if (is_logical_dev_addr_mode(dev->scsi3addr)) + reset_type = HPSA_DEVICE_RESET_MSG; + else + reset_type = HPSA_PHYS_TARGET_RESET; + + sprintf(msg, "resetting %s", + reset_type == HPSA_DEVICE_RESET_MSG ? "logical " : "physical "); + hpsa_show_dev_msg(KERN_WARNING, h, dev, msg); + + h->reset_in_progress = 1; /* send a reset to the SCSI LUN which the command was sent to */ - rc = hpsa_do_reset(h, dev, dev->scsi3addr, HPSA_RESET_TYPE_LUN, + rc = hpsa_do_reset(h, dev, dev->scsi3addr, reset_type, DEFAULT_REPLY_QUEUE); - snprintf(msg, sizeof(msg), "reset %s", - rc == 0 ? "completed successfully" : "failed"); + sprintf(msg, "reset %s %s", + reset_type == HPSA_DEVICE_RESET_MSG ? "logical " : "physical ", + rc == 0 ? "completed successfully" : "failed"); hpsa_show_dev_msg(KERN_WARNING, h, dev, msg); + h->reset_in_progress = 0; return rc == 0 ? SUCCESS : FAILED; } @@ -6262,6 +6552,24 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, c->Request.CDB[8] = (size >> 8) & 0xFF; c->Request.CDB[9] = size & 0xFF; break; + case BMIC_SENSE_DIAG_OPTIONS: + c->Request.CDBLen = 16; + c->Request.type_attr_dir = + TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); + c->Request.Timeout = 0; + /* Spec says this should be BMIC_WRITE */ + c->Request.CDB[0] = BMIC_READ; + c->Request.CDB[6] = BMIC_SENSE_DIAG_OPTIONS; + break; + case BMIC_SET_DIAG_OPTIONS: + c->Request.CDBLen = 16; + c->Request.type_attr_dir = + TYPE_ATTR_DIR(cmd_type, + ATTR_SIMPLE, XFER_WRITE); + c->Request.Timeout = 0; + c->Request.CDB[0] = BMIC_WRITE; + c->Request.CDB[6] = BMIC_SET_DIAG_OPTIONS; + break; case HPSA_CACHE_FLUSH: c->Request.CDBLen = 12; c->Request.type_attr_dir = @@ -6311,6 +6619,32 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, c->Request.CDB[7] = (size >> 16) & 0xFF; c->Request.CDB[8] = (size >> 8) & 0XFF; break; + case BMIC_SENSE_SUBSYSTEM_INFORMATION: + c->Request.CDBLen = 10; + c->Request.type_attr_dir = + TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); + c->Request.Timeout = 0; + c->Request.CDB[0] = BMIC_READ; + c->Request.CDB[6] = BMIC_SENSE_SUBSYSTEM_INFORMATION; + c->Request.CDB[7] = (size >> 16) & 0xFF; + c->Request.CDB[8] = (size >> 8) & 0XFF; + break; + case BMIC_IDENTIFY_CONTROLLER: + c->Request.CDBLen = 10; + c->Request.type_attr_dir = + TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ); + c->Request.Timeout = 0; + c->Request.CDB[0] = BMIC_READ; + c->Request.CDB[1] = 0; + c->Request.CDB[2] = 0; + c->Request.CDB[3] = 0; + c->Request.CDB[4] = 0; + c->Request.CDB[5] = 0; + c->Request.CDB[6] = BMIC_IDENTIFY_CONTROLLER; + c->Request.CDB[7] = (size >> 16) & 0xFF; + c->Request.CDB[8] = (size >> 8) & 0XFF; + c->Request.CDB[9] = 0; + break; default: dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd); BUG(); @@ -6319,6 +6653,20 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, } else if (cmd_type == TYPE_MSG) { switch (cmd) { + case HPSA_PHYS_TARGET_RESET: + c->Request.CDBLen = 16; + c->Request.type_attr_dir = + TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_NONE); + c->Request.Timeout = 0; /* Don't time out */ + memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB)); + c->Request.CDB[0] = HPSA_RESET; + c->Request.CDB[1] = HPSA_TARGET_RESET_TYPE; + /* Physical target reset needs no control bytes 4-7*/ + c->Request.CDB[4] = 0x00; + c->Request.CDB[5] = 0x00; + c->Request.CDB[6] = 0x00; + c->Request.CDB[7] = 0x00; + break; case HPSA_DEVICE_RESET_MSG: c->Request.CDBLen = 16; c->Request.type_attr_dir = @@ -6432,16 +6780,6 @@ static inline void finish_cmd(struct CommandList *c) complete(c->waiting); } - -static inline u32 hpsa_tag_discard_error_bits(struct ctlr_info *h, u32 tag) -{ -#define HPSA_PERF_ERROR_BITS ((1 << DIRECT_LOOKUP_SHIFT) - 1) -#define HPSA_SIMPLE_ERROR_BITS 0x03 - if (unlikely(!(h->transMethod & CFGTBL_Trans_Performant))) - return tag & ~HPSA_SIMPLE_ERROR_BITS; - return tag & ~HPSA_PERF_ERROR_BITS; -} - /* process completion of an indexed ("direct lookup") command */ static inline void process_indexed_cmd(struct ctlr_info *h, u32 raw_tag) @@ -7852,6 +8190,11 @@ static void hpsa_ack_ctlr_events(struct ctlr_info *h) */ static int hpsa_ctlr_needs_rescan(struct ctlr_info *h) { + if (h->drv_req_rescan) { + h->drv_req_rescan = 0; + return 1; + } + if (!(h->fw_support & MISC_FW_EVENT_NOTIFY)) return 0; @@ -7885,6 +8228,41 @@ static int hpsa_offline_devices_ready(struct ctlr_info *h) return 0; } +static int hpsa_luns_changed(struct ctlr_info *h) +{ + int rc = 1; /* assume there are changes */ + struct ReportLUNdata *logdev = NULL; + + /* if we can't find out if lun data has changed, + * assume that it has. + */ + + if (!h->lastlogicals) + goto out; + + logdev = kzalloc(sizeof(*logdev), GFP_KERNEL); + if (!logdev) { + dev_warn(&h->pdev->dev, + "Out of memory, can't track lun changes.\n"); + goto out; + } + if (hpsa_scsi_do_report_luns(h, 1, logdev, sizeof(*logdev), 0)) { + dev_warn(&h->pdev->dev, + "report luns failed, can't track lun changes.\n"); + goto out; + } + if (memcmp(logdev, h->lastlogicals, sizeof(*logdev))) { + dev_info(&h->pdev->dev, + "Lun changes detected.\n"); + memcpy(h->lastlogicals, logdev, sizeof(*logdev)); + goto out; + } else + rc = 0; /* no changes detected. */ +out: + kfree(logdev); + return rc; +} + static void hpsa_rescan_ctlr_worker(struct work_struct *work) { unsigned long flags; @@ -7900,6 +8278,19 @@ static void hpsa_rescan_ctlr_worker(struct work_struct *work) hpsa_ack_ctlr_events(h); hpsa_scan_start(h->scsi_host); scsi_host_put(h->scsi_host); + } else if (h->discovery_polling) { + hpsa_disable_rld_caching(h); + if (hpsa_luns_changed(h)) { + struct Scsi_Host *sh = NULL; + + dev_info(&h->pdev->dev, + "driver discovery polling rescan.\n"); + sh = scsi_host_get(h->scsi_host); + if (sh != NULL) { + hpsa_scan_start(sh); + scsi_host_put(sh); + } + } } spin_lock_irqsave(&h->lock, flags); if (!h->remove_in_progress) @@ -8140,6 +8531,8 @@ reinit_after_soft_reset: /* Enable Accelerated IO path at driver layer */ h->acciopath_status = 1; + /* Disable discovery polling.*/ + h->discovery_polling = 0; /* Turn the interrupts on so we can service requests */ @@ -8147,6 +8540,11 @@ reinit_after_soft_reset: hpsa_hba_inquiry(h); + h->lastlogicals = kzalloc(sizeof(*(h->lastlogicals)), GFP_KERNEL); + if (!h->lastlogicals) + dev_info(&h->pdev->dev, + "Can't track change to report lun data\n"); + /* Monitor the controller for firmware lockups */ h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL; INIT_DELAYED_WORK(&h->monitor_ctlr_work, hpsa_monitor_ctlr_worker); @@ -8219,6 +8617,71 @@ out: kfree(flush_buf); } +/* Make controller gather fresh report lun data each time we + * send down a report luns request + */ +static void hpsa_disable_rld_caching(struct ctlr_info *h) +{ + u32 *options; + struct CommandList *c; + int rc; + + /* Don't bother trying to set diag options if locked up */ + if (unlikely(h->lockup_detected)) + return; + + options = kzalloc(sizeof(*options), GFP_KERNEL); + if (!options) { + dev_err(&h->pdev->dev, + "Error: failed to disable rld caching, during alloc.\n"); + return; + } + + c = cmd_alloc(h); + + /* first, get the current diag options settings */ + if (fill_cmd(c, BMIC_SENSE_DIAG_OPTIONS, h, options, 4, 0, + RAID_CTLR_LUNID, TYPE_CMD)) + goto errout; + + rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, + PCI_DMA_FROMDEVICE, NO_TIMEOUT); + if ((rc != 0) || (c->err_info->CommandStatus != 0)) + goto errout; + + /* Now, set the bit for disabling the RLD caching */ + *options |= HPSA_DIAG_OPTS_DISABLE_RLD_CACHING; + + if (fill_cmd(c, BMIC_SET_DIAG_OPTIONS, h, options, 4, 0, + RAID_CTLR_LUNID, TYPE_CMD)) + goto errout; + + rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, + PCI_DMA_TODEVICE, NO_TIMEOUT); + if ((rc != 0) || (c->err_info->CommandStatus != 0)) + goto errout; + + /* Now verify that it got set: */ + if (fill_cmd(c, BMIC_SENSE_DIAG_OPTIONS, h, options, 4, 0, + RAID_CTLR_LUNID, TYPE_CMD)) + goto errout; + + rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, + PCI_DMA_FROMDEVICE, NO_TIMEOUT); + if ((rc != 0) || (c->err_info->CommandStatus != 0)) + goto errout; + + if (*options && HPSA_DIAG_OPTS_DISABLE_RLD_CACHING) + goto out; + +errout: + dev_err(&h->pdev->dev, + "Error: failed to disable report lun data caching.\n"); +out: + cmd_free(h, c); + kfree(options); +} + static void hpsa_shutdown(struct pci_dev *pdev) { struct ctlr_info *h; @@ -8284,6 +8747,7 @@ static void hpsa_remove_one(struct pci_dev *pdev) hpsa_free_performant_mode(h); /* init_one 7 */ hpsa_free_sg_chain_blocks(h); /* init_one 6 */ hpsa_free_cmd_pool(h); /* init_one 5 */ + kfree(h->lastlogicals); /* hpsa_free_irqs already called via hpsa_shutdown init_one 4 */ @@ -8296,6 +8760,9 @@ static void hpsa_remove_one(struct pci_dev *pdev) free_percpu(h->lockup_detected); /* init_one 2 */ h->lockup_detected = NULL; /* init_one 2 */ /* (void) pci_disable_pcie_error_reporting(pdev); */ /* init_one 1 */ + + hpsa_delete_sas_host(h); + kfree(h); /* init_one 1 */ } @@ -8758,18 +9225,369 @@ static void hpsa_drain_accel_commands(struct ctlr_info *h) } while (1); } +static struct hpsa_sas_phy *hpsa_alloc_sas_phy( + struct hpsa_sas_port *hpsa_sas_port) +{ + struct hpsa_sas_phy *hpsa_sas_phy; + struct sas_phy *phy; + + hpsa_sas_phy = kzalloc(sizeof(*hpsa_sas_phy), GFP_KERNEL); + if (!hpsa_sas_phy) + return NULL; + + phy = sas_phy_alloc(hpsa_sas_port->parent_node->parent_dev, + hpsa_sas_port->next_phy_index); + if (!phy) { + kfree(hpsa_sas_phy); + return NULL; + } + + hpsa_sas_port->next_phy_index++; + hpsa_sas_phy->phy = phy; + hpsa_sas_phy->parent_port = hpsa_sas_port; + + return hpsa_sas_phy; +} + +static void hpsa_free_sas_phy(struct hpsa_sas_phy *hpsa_sas_phy) +{ + struct sas_phy *phy = hpsa_sas_phy->phy; + + sas_port_delete_phy(hpsa_sas_phy->parent_port->port, phy); + sas_phy_free(phy); + if (hpsa_sas_phy->added_to_port) + list_del(&hpsa_sas_phy->phy_list_entry); + kfree(hpsa_sas_phy); +} + +static int hpsa_sas_port_add_phy(struct hpsa_sas_phy *hpsa_sas_phy) +{ + int rc; + struct hpsa_sas_port *hpsa_sas_port; + struct sas_phy *phy; + struct sas_identify *identify; + + hpsa_sas_port = hpsa_sas_phy->parent_port; + phy = hpsa_sas_phy->phy; + + identify = &phy->identify; + memset(identify, 0, sizeof(*identify)); + identify->sas_address = hpsa_sas_port->sas_address; + identify->device_type = SAS_END_DEVICE; + identify->initiator_port_protocols = SAS_PROTOCOL_STP; + identify->target_port_protocols = SAS_PROTOCOL_STP; + phy->minimum_linkrate_hw = SAS_LINK_RATE_UNKNOWN; + phy->maximum_linkrate_hw = SAS_LINK_RATE_UNKNOWN; + phy->minimum_linkrate = SAS_LINK_RATE_UNKNOWN; + phy->maximum_linkrate = SAS_LINK_RATE_UNKNOWN; + phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN; + + rc = sas_phy_add(hpsa_sas_phy->phy); + if (rc) + return rc; + + sas_port_add_phy(hpsa_sas_port->port, hpsa_sas_phy->phy); + list_add_tail(&hpsa_sas_phy->phy_list_entry, + &hpsa_sas_port->phy_list_head); + hpsa_sas_phy->added_to_port = true; + + return 0; +} + +static int + hpsa_sas_port_add_rphy(struct hpsa_sas_port *hpsa_sas_port, + struct sas_rphy *rphy) +{ + struct sas_identify *identify; + + identify = &rphy->identify; + identify->sas_address = hpsa_sas_port->sas_address; + identify->initiator_port_protocols = SAS_PROTOCOL_STP; + identify->target_port_protocols = SAS_PROTOCOL_STP; + + return sas_rphy_add(rphy); +} + +static struct hpsa_sas_port + *hpsa_alloc_sas_port(struct hpsa_sas_node *hpsa_sas_node, + u64 sas_address) +{ + int rc; + struct hpsa_sas_port *hpsa_sas_port; + struct sas_port *port; + + hpsa_sas_port = kzalloc(sizeof(*hpsa_sas_port), GFP_KERNEL); + if (!hpsa_sas_port) + return NULL; + + INIT_LIST_HEAD(&hpsa_sas_port->phy_list_head); + hpsa_sas_port->parent_node = hpsa_sas_node; + + port = sas_port_alloc_num(hpsa_sas_node->parent_dev); + if (!port) + goto free_hpsa_port; + + rc = sas_port_add(port); + if (rc) + goto free_sas_port; + + hpsa_sas_port->port = port; + hpsa_sas_port->sas_address = sas_address; + list_add_tail(&hpsa_sas_port->port_list_entry, + &hpsa_sas_node->port_list_head); + + return hpsa_sas_port; + +free_sas_port: + sas_port_free(port); +free_hpsa_port: + kfree(hpsa_sas_port); + + return NULL; +} + +static void hpsa_free_sas_port(struct hpsa_sas_port *hpsa_sas_port) +{ + struct hpsa_sas_phy *hpsa_sas_phy; + struct hpsa_sas_phy *next; + + list_for_each_entry_safe(hpsa_sas_phy, next, + &hpsa_sas_port->phy_list_head, phy_list_entry) + hpsa_free_sas_phy(hpsa_sas_phy); + + sas_port_delete(hpsa_sas_port->port); + list_del(&hpsa_sas_port->port_list_entry); + kfree(hpsa_sas_port); +} + +static struct hpsa_sas_node *hpsa_alloc_sas_node(struct device *parent_dev) +{ + struct hpsa_sas_node *hpsa_sas_node; + + hpsa_sas_node = kzalloc(sizeof(*hpsa_sas_node), GFP_KERNEL); + if (hpsa_sas_node) { + hpsa_sas_node->parent_dev = parent_dev; + INIT_LIST_HEAD(&hpsa_sas_node->port_list_head); + } + + return hpsa_sas_node; +} + +static void hpsa_free_sas_node(struct hpsa_sas_node *hpsa_sas_node) +{ + struct hpsa_sas_port *hpsa_sas_port; + struct hpsa_sas_port *next; + + if (!hpsa_sas_node) + return; + + list_for_each_entry_safe(hpsa_sas_port, next, + &hpsa_sas_node->port_list_head, port_list_entry) + hpsa_free_sas_port(hpsa_sas_port); + + kfree(hpsa_sas_node); +} + +static struct hpsa_scsi_dev_t + *hpsa_find_device_by_sas_rphy(struct ctlr_info *h, + struct sas_rphy *rphy) +{ + int i; + struct hpsa_scsi_dev_t *device; + + for (i = 0; i < h->ndevices; i++) { + device = h->dev[i]; + if (!device->sas_port) + continue; + if (device->sas_port->rphy == rphy) + return device; + } + + return NULL; +} + +static int hpsa_add_sas_host(struct ctlr_info *h) +{ + int rc; + struct device *parent_dev; + struct hpsa_sas_node *hpsa_sas_node; + struct hpsa_sas_port *hpsa_sas_port; + struct hpsa_sas_phy *hpsa_sas_phy; + + parent_dev = &h->scsi_host->shost_gendev; + + hpsa_sas_node = hpsa_alloc_sas_node(parent_dev); + if (!hpsa_sas_node) + return -ENOMEM; + + hpsa_sas_port = hpsa_alloc_sas_port(hpsa_sas_node, h->sas_address); + if (!hpsa_sas_port) { + rc = -ENODEV; + goto free_sas_node; + } + + hpsa_sas_phy = hpsa_alloc_sas_phy(hpsa_sas_port); + if (!hpsa_sas_phy) { + rc = -ENODEV; + goto free_sas_port; + } + + rc = hpsa_sas_port_add_phy(hpsa_sas_phy); + if (rc) + goto free_sas_phy; + + h->sas_host = hpsa_sas_node; + + return 0; + +free_sas_phy: + hpsa_free_sas_phy(hpsa_sas_phy); +free_sas_port: + hpsa_free_sas_port(hpsa_sas_port); +free_sas_node: + hpsa_free_sas_node(hpsa_sas_node); + + return rc; +} + +static void hpsa_delete_sas_host(struct ctlr_info *h) +{ + hpsa_free_sas_node(h->sas_host); +} + +static int hpsa_add_sas_device(struct hpsa_sas_node *hpsa_sas_node, + struct hpsa_scsi_dev_t *device) +{ + int rc; + struct hpsa_sas_port *hpsa_sas_port; + struct sas_rphy *rphy; + + hpsa_sas_port = hpsa_alloc_sas_port(hpsa_sas_node, device->sas_address); + if (!hpsa_sas_port) + return -ENOMEM; + + rphy = sas_end_device_alloc(hpsa_sas_port->port); + if (!rphy) { + rc = -ENODEV; + goto free_sas_port; + } + + hpsa_sas_port->rphy = rphy; + device->sas_port = hpsa_sas_port; + + rc = hpsa_sas_port_add_rphy(hpsa_sas_port, rphy); + if (rc) + goto free_sas_port; + + return 0; + +free_sas_port: + hpsa_free_sas_port(hpsa_sas_port); + device->sas_port = NULL; + + return rc; +} + +static void hpsa_remove_sas_device(struct hpsa_scsi_dev_t *device) +{ + if (device->sas_port) { + hpsa_free_sas_port(device->sas_port); + device->sas_port = NULL; + } +} + +static int +hpsa_sas_get_linkerrors(struct sas_phy *phy) +{ + return 0; +} + +static int +hpsa_sas_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier) +{ + return 0; +} + +static int +hpsa_sas_get_bay_identifier(struct sas_rphy *rphy) +{ + return -ENXIO; +} + +static int +hpsa_sas_phy_reset(struct sas_phy *phy, int hard_reset) +{ + return 0; +} + +static int +hpsa_sas_phy_enable(struct sas_phy *phy, int enable) +{ + return 0; +} + +static int +hpsa_sas_phy_setup(struct sas_phy *phy) +{ + return 0; +} + +static void +hpsa_sas_phy_release(struct sas_phy *phy) +{ +} + +static int +hpsa_sas_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates) +{ + return -EINVAL; +} + +/* SMP = Serial Management Protocol */ +static int +hpsa_sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, +struct request *req) +{ + return -EINVAL; +} + +static struct sas_function_template hpsa_sas_transport_functions = { + .get_linkerrors = hpsa_sas_get_linkerrors, + .get_enclosure_identifier = hpsa_sas_get_enclosure_identifier, + .get_bay_identifier = hpsa_sas_get_bay_identifier, + .phy_reset = hpsa_sas_phy_reset, + .phy_enable = hpsa_sas_phy_enable, + .phy_setup = hpsa_sas_phy_setup, + .phy_release = hpsa_sas_phy_release, + .set_phy_speed = hpsa_sas_phy_speed, + .smp_handler = hpsa_sas_smp_handler, +}; + /* * This is it. Register the PCI driver information for the cards we control * the OS will call our registered routines when it finds one of our cards. */ static int __init hpsa_init(void) { - return pci_register_driver(&hpsa_pci_driver); + int rc; + + hpsa_sas_transport_template = + sas_attach_transport(&hpsa_sas_transport_functions); + if (!hpsa_sas_transport_template) + return -ENODEV; + + rc = pci_register_driver(&hpsa_pci_driver); + + if (rc) + sas_release_transport(hpsa_sas_transport_template); + + return rc; } static void __exit hpsa_cleanup(void) { pci_unregister_driver(&hpsa_pci_driver); + sas_release_transport(hpsa_sas_transport_template); } static void __attribute__((unused)) verify_offsets(void) |
