summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/g_NCR5380.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/g_NCR5380.c')
-rw-r--r--drivers/scsi/g_NCR5380.c224
1 files changed, 12 insertions, 212 deletions
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index b331272..f35792f 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -18,20 +18,6 @@
*
* Added ISAPNP support for DTC436 adapters,
* Thomas Sailer, sailer@ife.ee.ethz.ch
- *
- * ALPHA RELEASE 1.
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
*/
/*
@@ -40,14 +26,6 @@
*/
/*
- * Options :
- *
- * PARITY - enable parity checking. Not supported.
- *
- * SCSI2 - enable support for SCSI-II tagged queueing. Untested.
- *
- * USLEEP - enable support for devices that don't disconnect. Untested.
- *
* The card is detected and initialized in one of several ways :
* 1. With command line overrides - NCR5380=port,irq may be
* used on the LILO command line to override the defaults.
@@ -79,27 +57,21 @@
*/
/* settings for DTC3181E card with only Mustek scanner attached */
-#define USLEEP
#define USLEEP_POLL 1
#define USLEEP_SLEEP 20
#define USLEEP_WAITLONG 500
#define AUTOPROBE_IRQ
-#define AUTOSENSE
-
#ifdef CONFIG_SCSI_GENERIC_NCR53C400
#define NCR53C400_PSEUDO_DMA 1
#define PSEUDO_DMA
#define NCR53C400
-#define NCR5380_STATS
-#undef NCR5380_STAT_LIMIT
#endif
#include <asm/io.h>
#include <linux/signal.h>
#include <linux/blkdev.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
#include "g_NCR5380.h"
#include "NCR5380.h"
@@ -277,7 +249,7 @@ static int __init do_DTC3181E_setup(char *str)
* Locks: none
*/
-int __init generic_NCR5380_detect(struct scsi_host_template * tpnt)
+static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
{
static int current_override = 0;
int count;
@@ -335,7 +307,7 @@ int __init generic_NCR5380_detect(struct scsi_host_template * tpnt)
if (pnp_irq_valid(dev, 0))
overrides[count].irq = pnp_irq(dev, 0);
else
- overrides[count].irq = SCSI_IRQ_NONE;
+ overrides[count].irq = NO_IRQ;
if (pnp_dma_valid(dev, 0))
overrides[count].dma = pnp_dma(dev, 0);
else
@@ -455,27 +427,22 @@ int __init generic_NCR5380_detect(struct scsi_host_template * tpnt)
else
instance->irq = NCR5380_probe_irq(instance, 0xffff);
- if (instance->irq != SCSI_IRQ_NONE)
+ /* Compatibility with documented NCR5380 kernel parameters */
+ if (instance->irq == 255)
+ instance->irq = NO_IRQ;
+
+ if (instance->irq != NO_IRQ)
if (request_irq(instance->irq, generic_NCR5380_intr,
0, "NCR5380", instance)) {
printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
- instance->irq = SCSI_IRQ_NONE;
+ instance->irq = NO_IRQ;
}
- if (instance->irq == SCSI_IRQ_NONE) {
+ if (instance->irq == NO_IRQ) {
printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
}
- printk(KERN_INFO "scsi%d : at " STRVAL(NCR5380_map_name) " 0x%x", instance->host_no, (unsigned int) instance->NCR5380_instance_name);
- if (instance->irq == SCSI_IRQ_NONE)
- printk(" interrupts disabled");
- else
- printk(" irq %d", instance->irq);
- printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d", CAN_QUEUE, CMD_PER_LUN, GENERIC_NCR5380_PUBLIC_RELEASE);
- NCR5380_print_options(instance);
- printk("\n");
-
++current_override;
++count;
}
@@ -483,19 +450,6 @@ int __init generic_NCR5380_detect(struct scsi_host_template * tpnt)
}
/**
- * generic_NCR5380_info - reporting string
- * @host: NCR5380 to report on
- *
- * Report driver information for the NCR5380
- */
-
-const char *generic_NCR5380_info(struct Scsi_Host *host)
-{
- static const char string[] = "Generic NCR5380/53C400 Driver";
- return string;
-}
-
-/**
* generic_NCR5380_release_resources - free resources
* @instance: host adapter to clean up
*
@@ -504,12 +458,12 @@ const char *generic_NCR5380_info(struct Scsi_Host *host)
* Locks: none
*/
-int generic_NCR5380_release_resources(struct Scsi_Host *instance)
+static int generic_NCR5380_release_resources(struct Scsi_Host *instance)
{
NCR5380_local_declare();
NCR5380_setup(instance);
- if (instance->irq != SCSI_IRQ_NONE)
+ if (instance->irq != NO_IRQ)
free_irq(instance->irq, instance);
NCR5380_exit(instance);
@@ -741,163 +695,9 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src,
#include "NCR5380.c"
-#define PRINTP(x) seq_printf(m, x)
-#define ANDP ,
-
-static void sprint_opcode(struct seq_file *m, int opcode)
-{
- PRINTP("0x%02x " ANDP opcode);
-}
-
-static void sprint_command(struct seq_file *m, unsigned char *command)
-{
- int i, s;
- sprint_opcode(m, command[0]);
- for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
- PRINTP("%02x " ANDP command[i]);
- PRINTP("\n");
-}
-
-/**
- * sprintf_Scsi_Cmnd - print a scsi command
- * @m: seq_fil to print into
- * @cmd: SCSI command block
- *
- * Print out the target and command data in hex
- */
-
-static void sprint_Scsi_Cmnd(struct seq_file *m, Scsi_Cmnd * cmd)
-{
- PRINTP("host number %d destination target %d, lun %llu\n" ANDP cmd->device->host->host_no ANDP cmd->device->id ANDP cmd->device->lun);
- PRINTP(" command = ");
- sprint_command(m, cmd->cmnd);
-}
-
-/**
- * generic_NCR5380_proc_info - /proc for NCR5380 driver
- * @buffer: buffer to print into
- * @start: start position
- * @offset: offset into buffer
- * @len: length
- * @hostno: instance to affect
- * @inout: read/write
- *
- * Provide the procfs information for the 5380 controller. We fill
- * this with useful debugging information including the commands
- * being executed, disconnected command queue and the statistical
- * data
- *
- * Locks: global cli/lock for queue walk
- */
-
-static int generic_NCR5380_show_info(struct seq_file *m, struct Scsi_Host *scsi_ptr)
-{
- NCR5380_local_declare();
- unsigned long flags;
- unsigned char status;
- int i;
- Scsi_Cmnd *ptr;
- struct NCR5380_hostdata *hostdata;
-#ifdef NCR5380_STATS
- struct scsi_device *dev;
-#endif
-
- NCR5380_setup(scsi_ptr);
- hostdata = (struct NCR5380_hostdata *) scsi_ptr->hostdata;
-
- spin_lock_irqsave(scsi_ptr->host_lock, flags);
- PRINTP("SCSI host number %d : %s\n" ANDP scsi_ptr->host_no ANDP scsi_ptr->hostt->name);
- PRINTP("Generic NCR5380 driver version %d\n" ANDP GENERIC_NCR5380_PUBLIC_RELEASE);
- PRINTP("NCR5380 core version %d\n" ANDP NCR5380_PUBLIC_RELEASE);
-#ifdef NCR53C400
- PRINTP("NCR53C400 extension version %d\n" ANDP NCR53C400_PUBLIC_RELEASE);
- PRINTP("NCR53C400 card%s detected\n" ANDP(((struct NCR5380_hostdata *) scsi_ptr->hostdata)->flags & FLAG_NCR53C400) ? "" : " not");
-# if NCR53C400_PSEUDO_DMA
- PRINTP("NCR53C400 pseudo DMA used\n");
-# endif
-#else
- PRINTP("NO NCR53C400 driver extensions\n");
-#endif
- PRINTP("Using %s mapping at %s 0x%lx, " ANDP STRVAL(NCR5380_map_config) ANDP STRVAL(NCR5380_map_name) ANDP scsi_ptr->NCR5380_instance_name);
- if (scsi_ptr->irq == SCSI_IRQ_NONE)
- PRINTP("no interrupt\n");
- else
- PRINTP("on interrupt %d\n" ANDP scsi_ptr->irq);
-
-#ifdef NCR5380_STATS
- if (hostdata->connected || hostdata->issue_queue || hostdata->disconnected_queue)
- PRINTP("There are commands pending, transfer rates may be crud\n");
- if (hostdata->pendingr)
- PRINTP(" %d pending reads" ANDP hostdata->pendingr);
- if (hostdata->pendingw)
- PRINTP(" %d pending writes" ANDP hostdata->pendingw);
- if (hostdata->pendingr || hostdata->pendingw)
- PRINTP("\n");
- shost_for_each_device(dev, scsi_ptr) {
- unsigned long br = hostdata->bytes_read[dev->id];
- unsigned long bw = hostdata->bytes_write[dev->id];
- long tr = hostdata->time_read[dev->id] / HZ;
- long tw = hostdata->time_write[dev->id] / HZ;
-
- PRINTP(" T:%d %s " ANDP dev->id ANDP scsi_device_type(dev->type));
- for (i = 0; i < 8; i++)
- if (dev->vendor[i] >= 0x20)
- seq_putc(m, dev->vendor[i]);
- seq_putc(m, ' ');
- for (i = 0; i < 16; i++)
- if (dev->model[i] >= 0x20)
- seq_putc(m, dev->model[i]);
- seq_putc(m, ' ');
- for (i = 0; i < 4; i++)
- if (dev->rev[i] >= 0x20)
- seq_putc(m, dev->rev[i]);
- seq_putc(m, ' ');
-
- PRINTP("\n%10ld kb read in %5ld secs" ANDP br / 1024 ANDP tr);
- if (tr)
- PRINTP(" @ %5ld bps" ANDP br / tr);
-
- PRINTP("\n%10ld kb written in %5ld secs" ANDP bw / 1024 ANDP tw);
- if (tw)
- PRINTP(" @ %5ld bps" ANDP bw / tw);
- PRINTP("\n");
- }
-#endif
-
- status = NCR5380_read(STATUS_REG);
- if (!(status & SR_REQ))
- PRINTP("REQ not asserted, phase unknown.\n");
- else {
- for (i = 0; (phases[i].value != PHASE_UNKNOWN) && (phases[i].value != (status & PHASE_MASK)); ++i);
- PRINTP("Phase %s\n" ANDP phases[i].name);
- }
-
- if (!hostdata->connected) {
- PRINTP("No currently connected command\n");
- } else {
- sprint_Scsi_Cmnd(m, (Scsi_Cmnd *) hostdata->connected);
- }
-
- PRINTP("issue_queue\n");
-
- for (ptr = (Scsi_Cmnd *) hostdata->issue_queue; ptr; ptr = (Scsi_Cmnd *) ptr->host_scribble)
- sprint_Scsi_Cmnd(m, ptr);
-
- PRINTP("disconnected_queue\n");
-
- for (ptr = (Scsi_Cmnd *) hostdata->disconnected_queue; ptr; ptr = (Scsi_Cmnd *) ptr->host_scribble)
- sprint_Scsi_Cmnd(m, ptr);
-
- spin_unlock_irqrestore(scsi_ptr->host_lock, flags);
- return 0;
-}
-
-#undef PRINTP
-#undef ANDP
-
static struct scsi_host_template driver_template = {
.show_info = generic_NCR5380_show_info,
- .name = "Generic NCR5380/NCR53C400 Scsi Driver",
+ .name = "Generic NCR5380/NCR53C400 SCSI",
.detect = generic_NCR5380_detect,
.release = generic_NCR5380_release_resources,
.info = generic_NCR5380_info,
OpenPOWER on IntegriCloud