diff options
Diffstat (limited to 'drivers/scsi/g_NCR5380.c')
| -rw-r--r-- | drivers/scsi/g_NCR5380.c | 36 |
1 files changed, 1 insertions, 35 deletions
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c index 18f4a4f..516bd6c 100644 --- a/drivers/scsi/g_NCR5380.c +++ b/drivers/scsi/g_NCR5380.c @@ -18,42 +18,8 @@ * * Added ISAPNP support for DTC436 adapters, * Thomas Sailer, sailer@ife.ee.ethz.ch - */ - -/* - * TODO : flesh out DMA support, find some one actually using this (I have - * a memory mapped Trantor board that works fine) - */ - -/* - * The card is detected and initialized in one of several ways : - * 1. With command line overrides - NCR5380=port,irq may be - * used on the LILO command line to override the defaults. - * - * 2. With the GENERIC_NCR5380_OVERRIDE compile time define. This is - * specified as an array of address, irq, dma, board tuples. Ie, for - * one board at 0x350, IRQ5, no dma, I could say - * -DGENERIC_NCR5380_OVERRIDE={{0xcc000, 5, DMA_NONE, BOARD_NCR5380}} - * - * -1 should be specified for no or DMA interrupt, -2 to autoprobe for an - * IRQ line if overridden on the command line. * - * 3. When included as a module, with arguments passed on the command line: - * ncr_irq=xx the interrupt - * ncr_addr=xx the port or base address (for port or memory - * mapped, resp.) - * ncr_dma=xx the DMA - * ncr_5380=1 to set up for a NCR5380 board - * ncr_53c400=1 to set up for a NCR53C400 board - * e.g. - * modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1 - * for a port mapped NCR5380 board or - * modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1 - * for a memory mapped NCR53C400 board with interrupts disabled. - * - * 255 should be specified for no or DMA interrupt, 254 to autoprobe for an - * IRQ line if overridden on the command line. - * + * See Documentation/scsi/g_NCR5380.txt for more info. */ #include <asm/io.h> |
