diff options
Diffstat (limited to 'drivers/scsi/csiostor/csio_scsi.c')
-rw-r--r-- | drivers/scsi/csiostor/csio_scsi.c | 2555 |
1 files changed, 2555 insertions, 0 deletions
diff --git a/drivers/scsi/csiostor/csio_scsi.c b/drivers/scsi/csiostor/csio_scsi.c new file mode 100644 index 0000000..fdbd7da --- /dev/null +++ b/drivers/scsi/csiostor/csio_scsi.c @@ -0,0 +1,2555 @@ +/* + * This file is part of the Chelsio FCoE driver for Linux. + * + * Copyright (c) 2008-2012 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/ctype.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/compiler.h> +#include <linux/export.h> +#include <linux/module.h> +#include <asm/unaligned.h> +#include <asm/page.h> +#include <scsi/scsi.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_transport_fc.h> + +#include "csio_hw.h" +#include "csio_lnode.h" +#include "csio_rnode.h" +#include "csio_scsi.h" +#include "csio_init.h" + +int csio_scsi_eqsize = 65536; +int csio_scsi_iqlen = 128; +int csio_scsi_ioreqs = 2048; +uint32_t csio_max_scan_tmo; +uint32_t csio_delta_scan_tmo = 5; +int csio_lun_qdepth = 32; + +static int csio_ddp_descs = 128; + +static int csio_do_abrt_cls(struct csio_hw *, + struct csio_ioreq *, bool); + +static void csio_scsis_uninit(struct csio_ioreq *, enum csio_scsi_ev); +static void csio_scsis_io_active(struct csio_ioreq *, enum csio_scsi_ev); +static void csio_scsis_tm_active(struct csio_ioreq *, enum csio_scsi_ev); +static void csio_scsis_aborting(struct csio_ioreq *, enum csio_scsi_ev); +static void csio_scsis_closing(struct csio_ioreq *, enum csio_scsi_ev); +static void csio_scsis_shost_cmpl_await(struct csio_ioreq *, enum csio_scsi_ev); + +/* + * csio_scsi_match_io - Match an ioreq with the given SCSI level data. + * @ioreq: The I/O request + * @sld: Level information + * + * Should be called with lock held. + * + */ +static bool +csio_scsi_match_io(struct csio_ioreq *ioreq, struct csio_scsi_level_data *sld) +{ + struct scsi_cmnd *scmnd = csio_scsi_cmnd(ioreq); + + switch (sld->level) { + case CSIO_LEV_LUN: + if (scmnd == NULL) + return false; + + return ((ioreq->lnode == sld->lnode) && + (ioreq->rnode == sld->rnode) && + ((uint64_t)scmnd->device->lun == sld->oslun)); + + case CSIO_LEV_RNODE: + return ((ioreq->lnode == sld->lnode) && + (ioreq->rnode == sld->rnode)); + case CSIO_LEV_LNODE: + return (ioreq->lnode == sld->lnode); + case CSIO_LEV_ALL: + return true; + default: + return false; + } +} + +/* + * csio_scsi_gather_active_ios - Gather active I/Os based on level + * @scm: SCSI module + * @sld: Level information + * @dest: The queue where these I/Os have to be gathered. + * + * Should be called with lock held. + */ +static void +csio_scsi_gather_active_ios(struct csio_scsim *scm, + struct csio_scsi_level_data *sld, + struct list_head *dest) +{ + struct list_head *tmp, *next; + + if (list_empty(&scm->active_q)) + return; + + /* Just splice the entire active_q into dest */ + if (sld->level == CSIO_LEV_ALL) { + list_splice_tail_init(&scm->active_q, dest); + return; + } + + list_for_each_safe(tmp, next, &scm->active_q) { + if (csio_scsi_match_io((struct csio_ioreq *)tmp, sld)) { + list_del_init(tmp); + list_add_tail(tmp, dest); + } + } +} + +static inline bool +csio_scsi_itnexus_loss_error(uint16_t error) +{ + switch (error) { + case FW_ERR_LINK_DOWN: + case FW_RDEV_NOT_READY: + case FW_ERR_RDEV_LOST: + case FW_ERR_RDEV_LOGO: + case FW_ERR_RDEV_IMPL_LOGO: + return 1; + } + return 0; +} + +static inline void +csio_scsi_tag(struct scsi_cmnd *scmnd, uint8_t *tag, uint8_t hq, + uint8_t oq, uint8_t sq) +{ + char stag[2]; + + if (scsi_populate_tag_msg(scmnd, stag)) { + switch (stag[0]) { + case HEAD_OF_QUEUE_TAG: + *tag = hq; + break; + case ORDERED_QUEUE_TAG: + *tag = oq; + break; + default: + *tag = sq; + break; + } + } else + *tag = 0; +} + +/* + * csio_scsi_fcp_cmnd - Frame the SCSI FCP command paylod. + * @req: IO req structure. + * @addr: DMA location to place the payload. + * + * This routine is shared between FCP_WRITE, FCP_READ and FCP_CMD requests. + */ +static inline void +csio_scsi_fcp_cmnd(struct csio_ioreq *req, void *addr) +{ + struct fcp_cmnd *fcp_cmnd = (struct fcp_cmnd *)addr; + struct scsi_cmnd *scmnd = csio_scsi_cmnd(req); + + /* Check for Task Management */ + if (likely(scmnd->SCp.Message == 0)) { + int_to_scsilun(scmnd->device->lun, &fcp_cmnd->fc_lun); + fcp_cmnd->fc_tm_flags = 0; + fcp_cmnd->fc_cmdref = 0; + fcp_cmnd->fc_pri_ta = 0; + + memcpy(fcp_cmnd->fc_cdb, scmnd->cmnd, 16); + csio_scsi_tag(scmnd, &fcp_cmnd->fc_pri_ta, + FCP_PTA_HEADQ, FCP_PTA_ORDERED, FCP_PTA_SIMPLE); + fcp_cmnd->fc_dl = cpu_to_be32(scsi_bufflen(scmnd)); + + if (req->nsge) + if (req->datadir == DMA_TO_DEVICE) + fcp_cmnd->fc_flags = FCP_CFL_WRDATA; + else + fcp_cmnd->fc_flags = FCP_CFL_RDDATA; + else + fcp_cmnd->fc_flags = 0; + } else { + memset(fcp_cmnd, 0, sizeof(*fcp_cmnd)); + int_to_scsilun(scmnd->device->lun, &fcp_cmnd->fc_lun); + fcp_cmnd->fc_tm_flags = (uint8_t)scmnd->SCp.Message; + } +} + +/* + * csio_scsi_init_cmd_wr - Initialize the SCSI CMD WR. + * @req: IO req structure. + * @addr: DMA location to place the payload. + * @size: Size of WR (including FW WR + immed data + rsp SG entry + * + * Wrapper for populating fw_scsi_cmd_wr. + */ +static inline void +csio_scsi_init_cmd_wr(struct csio_ioreq *req, void *addr, uint32_t size) +{ + struct csio_hw *hw = req->lnode->hwp; + struct csio_rnode *rn = req->rnode; + struct fw_scsi_cmd_wr *wr = (struct fw_scsi_cmd_wr *)addr; + struct csio_dma_buf *dma_buf; + uint8_t imm = csio_hw_to_scsim(hw)->proto_cmd_len; + + wr->op_immdlen = cpu_to_be32(FW_WR_OP(FW_SCSI_CMD_WR) | + FW_SCSI_CMD_WR_IMMDLEN(imm)); + wr->flowid_len16 = cpu_to_be32(FW_WR_FLOWID(rn->flowid) | + FW_WR_LEN16( + DIV_ROUND_UP(size, 16))); + + wr->cookie = (uintptr_t) req; + wr->iqid = (uint16_t)cpu_to_be16(csio_q_physiqid(hw, req->iq_idx)); + wr->tmo_val = (uint8_t) req->tmo; + wr->r3 = 0; + memset(&wr->r5, 0, 8); + + /* Get RSP DMA buffer */ + dma_buf = &req->dma_buf; + + /* Prepare RSP SGL */ + wr->rsp_dmalen = cpu_to_be32(dma_buf->len); + wr->rsp_dmaaddr = cpu_to_be64(dma_buf->paddr); + + wr->r6 = 0; + + wr->u.fcoe.ctl_pri = 0; + wr->u.fcoe.cp_en_class = 0; + wr->u.fcoe.r4_lo[0] = 0; + wr->u.fcoe.r4_lo[1] = 0; + + /* Frame a FCP command */ + csio_scsi_fcp_cmnd(req, (void *)((uintptr_t)addr + + sizeof(struct fw_scsi_cmd_wr))); +} + +#define CSIO_SCSI_CMD_WR_SZ(_imm) \ + (sizeof(struct fw_scsi_cmd_wr) + /* WR size */ \ + ALIGN((_imm), 16)) /* Immed data */ + +#define CSIO_SCSI_CMD_WR_SZ_16(_imm) \ + (ALIGN(CSIO_SCSI_CMD_WR_SZ((_imm)), 16)) + +/* + * csio_scsi_cmd - Create a SCSI CMD WR. + * @req: IO req structure. + * + * Gets a WR slot in the ingress queue and initializes it with SCSI CMD WR. + * + */ +static inline void +csio_scsi_cmd(struct csio_ioreq *req) +{ + struct csio_wr_pair wrp; + struct csio_hw *hw = req->lnode->hwp; + struct csio_scsim *scsim = csio_hw_to_scsim(hw); + uint32_t size = CSIO_SCSI_CMD_WR_SZ_16(scsim->proto_cmd_len); + + req->drv_status = csio_wr_get(hw, req->eq_idx, size, &wrp); + if (unlikely(req->drv_status != 0)) + return; + + if (wrp.size1 >= size) { + /* Initialize WR in one shot */ + csio_scsi_init_cmd_wr(req, wrp.addr1, size); + } else { + uint8_t *tmpwr = csio_q_eq_wrap(hw, req->eq_idx); + + /* + * Make a temporary copy of the WR and write back + * the copy into the WR pair. + */ + csio_scsi_init_cmd_wr(req, (void *)tmpwr, size); + memcpy(wrp.addr1, tmpwr, wrp.size1); + memcpy(wrp.addr2, tmpwr + wrp.size1, size - wrp.size1); + } +} + +/* + * csio_scsi_init_ulptx_dsgl - Fill in a ULP_TX_SC_DSGL + * @hw: HW module + * @req: IO request + * @sgl: ULP TX SGL pointer. + * + */ +static inline void +csio_scsi_init_ultptx_dsgl(struct csio_hw *hw, struct csio_ioreq *req, + struct ulptx_sgl *sgl) +{ + struct ulptx_sge_pair *sge_pair = NULL; + struct scatterlist *sgel; + uint32_t i = 0; + uint32_t xfer_len; + struct list_head *tmp; + struct csio_dma_buf *dma_buf; + struct scsi_cmnd *scmnd = csio_scsi_cmnd(req); + + sgl->cmd_nsge = htonl(ULPTX_CMD(ULP_TX_SC_DSGL) | ULPTX_MORE | + ULPTX_NSGE(req->nsge)); + /* Now add the data SGLs */ + if (likely(!req->dcopy)) { + scsi_for_each_sg(scmnd, sgel, req->nsge, i) { + if (i == 0) { + sgl->addr0 = cpu_to_be64(sg_dma_address(sgel)); + sgl->len0 = cpu_to_be32(sg_dma_len(sgel)); + sge_pair = (struct ulptx_sge_pair *)(sgl + 1); + continue; + } + if ((i - 1) & 0x1) { + sge_pair->addr[1] = cpu_to_be64( + sg_dma_address(sgel)); + sge_pair->len[1] = cpu_to_be32( + sg_dma_len(sgel)); + sge_pair++; + } else { + sge_pair->addr[0] = cpu_to_be64( + sg_dma_address(sgel)); + sge_pair->len[0] = cpu_to_be32( + sg_dma_len(sgel)); + } + } + } else { + /* Program sg elements with driver's DDP buffer */ + xfer_len = scsi_bufflen(scmnd); + list_for_each(tmp, &req->gen_list) { + dma_buf = (struct csio_dma_buf *)tmp; + if (i == 0) { + sgl->addr0 = cpu_to_be64(dma_buf->paddr); + sgl->len0 = cpu_to_be32( + min(xfer_len, dma_buf->len)); + sge_pair = (struct ulptx_sge_pair *)(sgl + 1); + } else if ((i - 1) & 0x1) { + sge_pair->addr[1] = cpu_to_be64(dma_buf->paddr); + sge_pair->len[1] = cpu_to_be32( + min(xfer_len, dma_buf->len)); + sge_pair++; + } else { + sge_pair->addr[0] = cpu_to_be64(dma_buf->paddr); + sge_pair->len[0] = cpu_to_be32( + min(xfer_len, dma_buf->len)); + } + xfer_len -= min(xfer_len, dma_buf->len); + i++; + } + } +} + +/* + * csio_scsi_init_read_wr - Initialize the READ SCSI WR. + * @req: IO req structure. + * @wrp: DMA location to place the payload. + * @size: Size of WR (including FW WR + immed data + rsp SG entry + data SGL + * + * Wrapper for populating fw_scsi_read_wr. + */ +static inline void +csio_scsi_init_read_wr(struct csio_ioreq *req, void *wrp, uint32_t size) +{ + struct csio_hw *hw = req->lnode->hwp; + struct csio_rnode *rn = req->rnode; + struct fw_scsi_read_wr *wr = (struct fw_scsi_read_wr *)wrp; + struct ulptx_sgl *sgl; + struct csio_dma_buf *dma_buf; + uint8_t imm = csio_hw_to_scsim(hw)->proto_cmd_len; + struct scsi_cmnd *scmnd = csio_scsi_cmnd(req); + + wr->op_immdlen = cpu_to_be32(FW_WR_OP(FW_SCSI_READ_WR) | + FW_SCSI_READ_WR_IMMDLEN(imm)); + wr->flowid_len16 = cpu_to_be32(FW_WR_FLOWID(rn->flowid) | + FW_WR_LEN16(DIV_ROUND_UP(size, 16))); + wr->cookie = (uintptr_t)req; + wr->iqid = (uint16_t)cpu_to_be16(csio_q_physiqid(hw, req->iq_idx)); + wr->tmo_val = (uint8_t)(req->tmo); + wr->use_xfer_cnt = 1; + wr->xfer_cnt = cpu_to_be32(scsi_bufflen(scmnd)); + wr->ini_xfer_cnt = cpu_to_be32(scsi_bufflen(scmnd)); + /* Get RSP DMA buffer */ + dma_buf = &req->dma_buf; + + /* Prepare RSP SGL */ + wr->rsp_dmalen = cpu_to_be32(dma_buf->len); + wr->rsp_dmaaddr = cpu_to_be64(dma_buf->paddr); + + wr->r4 = 0; + + wr->u.fcoe.ctl_pri = 0; + wr->u.fcoe.cp_en_class = 0; + wr->u.fcoe.r3_lo[0] = 0; + wr->u.fcoe.r3_lo[1] = 0; + csio_scsi_fcp_cmnd(req, (void *)((uintptr_t)wrp + + sizeof(struct fw_scsi_read_wr))); + + /* Move WR pointer past command and immediate data */ + sgl = (struct ulptx_sgl *)((uintptr_t)wrp + + sizeof(struct fw_scsi_read_wr) + ALIGN(imm, 16)); + + /* Fill in the DSGL */ + csio_scsi_init_ultptx_dsgl(hw, req, sgl); +} + +/* + * csio_scsi_init_write_wr - Initialize the WRITE SCSI WR. + * @req: IO req structure. + * @wrp: DMA location to place the payload. + * @size: Size of WR (including FW WR + immed data + rsp SG entry + data SGL + * + * Wrapper for populating fw_scsi_write_wr. + */ +static inline void +csio_scsi_init_write_wr(struct csio_ioreq *req, void *wrp, uint32_t size) +{ + struct csio_hw *hw = req->lnode->hwp; + struct csio_rnode *rn = req->rnode; + struct fw_scsi_write_wr *wr = (struct fw_scsi_write_wr *)wrp; + struct ulptx_sgl *sgl; + struct csio_dma_buf *dma_buf; + uint8_t imm = csio_hw_to_scsim(hw)->proto_cmd_len; + struct scsi_cmnd *scmnd = csio_scsi_cmnd(req); + + wr->op_immdlen = cpu_to_be32(FW_WR_OP(FW_SCSI_WRITE_WR) | + FW_SCSI_WRITE_WR_IMMDLEN(imm)); + wr->flowid_len16 = cpu_to_be32(FW_WR_FLOWID(rn->flowid) | + FW_WR_LEN16(DIV_ROUND_UP(size, 16))); + wr->cookie = (uintptr_t)req; + wr->iqid = (uint16_t)cpu_to_be16(csio_q_physiqid(hw, req->iq_idx)); + wr->tmo_val = (uint8_t)(req->tmo); + wr->use_xfer_cnt = 1; + wr->xfer_cnt = cpu_to_be32(scsi_bufflen(scmnd)); + wr->ini_xfer_cnt = cpu_to_be32(scsi_bufflen(scmnd)); + /* Get RSP DMA buffer */ + dma_buf = &req->dma_buf; + + /* Prepare RSP SGL */ + wr->rsp_dmalen = cpu_to_be32(dma_buf->len); + wr->rsp_dmaaddr = cpu_to_be64(dma_buf->paddr); + + wr->r4 = 0; + + wr->u.fcoe.ctl_pri = 0; + wr->u.fcoe.cp_en_class = 0; + wr->u.fcoe.r3_lo[0] = 0; + wr->u.fcoe.r3_lo[1] = 0; + csio_scsi_fcp_cmnd(req, (void *)((uintptr_t)wrp + + sizeof(struct fw_scsi_write_wr))); + + /* Move WR pointer past command and immediate data */ + sgl = (struct ulptx_sgl *)((uintptr_t)wrp + + sizeof(struct fw_scsi_write_wr) + ALIGN(imm, 16)); + + /* Fill in the DSGL */ + csio_scsi_init_ultptx_dsgl(hw, req, sgl); +} + +/* Calculate WR size needed for fw_scsi_read_wr/fw_scsi_write_wr */ +#define CSIO_SCSI_DATA_WRSZ(req, oper, sz, imm) \ +do { \ + (sz) = sizeof(struct fw_scsi_##oper##_wr) + /* WR size */ \ + ALIGN((imm), 16) + /* Immed data */ \ + sizeof(struct ulptx_sgl); /* ulptx_sgl */ \ + \ + if (unlikely((req)->nsge > 1)) \ + (sz) += (sizeof(struct ulptx_sge_pair) * \ + (ALIGN(((req)->nsge - 1), 2) / 2)); \ + /* Data SGE */ \ +} while (0) + +/* + * csio_scsi_read - Create a SCSI READ WR. + * @req: IO req structure. + * + * Gets a WR slot in the ingress queue and initializes it with + * SCSI READ WR. + * + */ +static inline void +csio_scsi_read(struct csio_ioreq *req) +{ + struct csio_wr_pair wrp; + uint32_t size; + struct csio_hw *hw = req->lnode->hwp; + struct csio_scsim *scsim = csio_hw_to_scsim(hw); + + CSIO_SCSI_DATA_WRSZ(req, read, size, scsim->proto_cmd_len); + size = ALIGN(size, 16); + + req->drv_status = csio_wr_get(hw, req->eq_idx, size, &wrp); + if (likely(req->drv_status == 0)) { + if (likely(wrp.size1 >= size)) { + /* Initialize WR in one shot */ + csio_scsi_init_read_wr(req, wrp.addr1, size); + } else { + uint8_t *tmpwr = csio_q_eq_wrap(hw, req->eq_idx); + /* + * Make a temporary copy of the WR and write back + * the copy into the WR pair. + */ + csio_scsi_init_read_wr(req, (void *)tmpwr, size); + memcpy(wrp.addr1, tmpwr, wrp.size1); + memcpy(wrp.addr2, tmpwr + wrp.size1, size - wrp.size1); + } + } +} + +/* + * csio_scsi_write - Create a SCSI WRITE WR. + * @req: IO req structure. + * + * Gets a WR slot in the ingress queue and initializes it with + * SCSI WRITE WR. + * + */ +static inline void +csio_scsi_write(struct csio_ioreq *req) +{ + struct csio_wr_pair wrp; + uint32_t size; + struct csio_hw *hw = req->lnode->hwp; + struct csio_scsim *scsim = csio_hw_to_scsim(hw); + + CSIO_SCSI_DATA_WRSZ(req, write, size, scsim->proto_cmd_len); + size = ALIGN(size, 16); + + req->drv_status = csio_wr_get(hw, req->eq_idx, size, &wrp); + if (likely(req->drv_status == 0)) { + if (likely(wrp.size1 >= size)) { + /* Initialize WR in one shot */ + csio_scsi_init_write_wr(req, wrp.addr1, size); + } else { + uint8_t *tmpwr = csio_q_eq_wrap(hw, req->eq_idx); + /* + * Make a temporary copy of the WR and write back + * the copy into the WR pair. + */ + csio_scsi_init_write_wr(req, (void *)tmpwr, size); + memcpy(wrp.addr1, tmpwr, wrp.size1); + memcpy(wrp.addr2, tmpwr + wrp.size1, size - wrp.size1); + } + } +} + +/* + * csio_setup_ddp - Setup DDP buffers for Read request. + * @req: IO req structure. + * + * Checks SGLs/Data buffers are virtually contiguous required for DDP. + * If contiguous,driver posts SGLs in the WR otherwise post internal + * buffers for such request for DDP. + */ +static inline void +csio_setup_ddp(struct csio_scsim *scsim, struct csio_ioreq *req) +{ +#ifdef __CSIO_DEBUG__ + struct csio_hw *hw = req->lnode->hwp; +#endif + struct scatterlist *sgel = NULL; + struct scsi_cmnd *scmnd = csio_scsi_cmnd(req); + uint64_t sg_addr = 0; + uint32_t ddp_pagesz = 4096; + uint32_t buf_off; + struct csio_dma_buf *dma_buf = NULL; + uint32_t alloc_len = 0; + uint32_t xfer_len = 0; + uint32_t sg_len = 0; + uint32_t i; + + scsi_for_each_sg(scmnd, sgel, req->nsge, i) { + sg_addr = sg_dma_address(sgel); + sg_len = sg_dma_len(sgel); + + buf_off = sg_addr & (ddp_pagesz - 1); + + /* Except 1st buffer,all buffer addr have to be Page aligned */ + if (i != 0 && buf_off) { + csio_dbg(hw, "SGL addr not DDP aligned (%llx:%d)\n", + sg_addr, sg_len); + goto unaligned; + } + + /* Except last buffer,all buffer must end on page boundary */ + if ((i != (req->nsge - 1)) && + ((buf_off + sg_len) & (ddp_pagesz - 1))) { + csio_dbg(hw, + "SGL addr not ending on page boundary" + "(%llx:%d)\n", sg_addr, sg_len); + goto unaligned; + } + } + + /* SGL's are virtually contiguous. HW will DDP to SGLs */ + req->dcopy = 0; + csio_scsi_read(req); + + return; + +unaligned: + CSIO_INC_STATS(scsim, n_unaligned); + /* + * For unaligned SGLs, driver will allocate internal DDP buffer. + * Once command is completed data from DDP buffer copied to SGLs + */ + req->dcopy = 1; + + /* Use gen_list to store the DDP buffers */ + INIT_LIST_HEAD(&req->gen_list); + xfer_len = scsi_bufflen(scmnd); + + i = 0; + /* Allocate ddp buffers for this request */ + while (alloc_len < xfer_len) { + dma_buf = csio_get_scsi_ddp(scsim); + if (dma_buf == NULL || i > scsim->max_sge) { + req->drv_status = -EBUSY; + break; + } + alloc_len += dma_buf->len; + /* Added to IO req */ + list_add_tail(&dma_buf->list, &req->gen_list); + i++; + } + + if (!req->drv_status) { + /* set number of ddp bufs used */ + req->nsge = i; + csio_scsi_read(req); + return; + } + + /* release dma descs */ + if (i > 0) + csio_put_scsi_ddp_list(scsim, &req->gen_list, i); +} + +/* + * csio_scsi_init_abrt_cls_wr - Initialize an ABORT/CLOSE WR. + * @req: IO req structure. + * @addr: DMA location to place the payload. + * @size: Size of WR + * @abort: abort OR close + * + * Wrapper for populating fw_scsi_cmd_wr. + */ +static inline void +csio_scsi_init_abrt_cls_wr(struct csio_ioreq *req, void *addr, uint32_t size, + bool abort) +{ + struct csio_hw *hw = req->lnode->hwp; + struct csio_rnode *rn = req->rnode; + struct fw_scsi_abrt_cls_wr *wr = (struct fw_scsi_abrt_cls_wr *)addr; + + wr->op_immdlen = cpu_to_be32(FW_WR_OP(FW_SCSI_ABRT_CLS_WR)); + wr->flowid_len16 = cpu_to_be32(FW_WR_FLOWID(rn->flowid) | + FW_WR_LEN16( + DIV_ROUND_UP(size, 16))); + + wr->cookie = (uintptr_t) req; + wr->iqid = (uint16_t)cpu_to_be16(csio_q_physiqid(hw, req->iq_idx)); + wr->tmo_val = (uint8_t) req->tmo; + /* 0 for CHK_ALL_IO tells FW to look up t_cookie */ + wr->sub_opcode_to_chk_all_io = + (FW_SCSI_ABRT_CLS_WR_SUB_OPCODE(abort) | + FW_SCSI_ABRT_CLS_WR_CHK_ALL_IO(0)); + wr->r3[0] = 0; + wr->r3[1] = 0; + wr->r3[2] = 0; + wr->r3[3] = 0; + /* Since we re-use the same ioreq for abort as well */ + wr->t_cookie = (uintptr_t) req; +} + +static inline void +csio_scsi_abrt_cls(struct csio_ioreq *req, bool abort) +{ + struct csio_wr_pair wrp; + struct csio_hw *hw = req->lnode->hwp; + uint32_t size = ALIGN(sizeof(struct fw_scsi_abrt_cls_wr), 16); + + req->drv_status = csio_wr_get(hw, req->eq_idx, size, &wrp); + if (req->drv_status != 0) + return; + + if (wrp.size1 >= size) { + /* Initialize WR in one shot */ + csio_scsi_init_abrt_cls_wr(req, wrp.addr1, size, abort); + } else { + uint8_t *tmpwr = csio_q_eq_wrap(hw, req->eq_idx); + /* + * Make a temporary copy of the WR and write back + * the copy into the WR pair. + */ + csio_scsi_init_abrt_cls_wr(req, (void *)tmpwr, size, abort); + memcpy(wrp.addr1, tmpwr, wrp.size1); + memcpy(wrp.addr2, tmpwr + wrp.size1, size - wrp.size1); + } +} + +/*****************************************************************************/ +/* START: SCSI SM */ +/*****************************************************************************/ +static void +csio_scsis_uninit(struct csio_ioreq *req, enum csio_scsi_ev evt) +{ + struct csio_hw *hw = req->lnode->hwp; + struct csio_scsim *scsim = csio_hw_to_scsim(hw); + + switch (evt) { + case CSIO_SCSIE_START_IO: + + if (req->nsge) { + if (req->datadir == DMA_TO_DEVICE) { + req->dcopy = 0; + csio_scsi_write(req); + } else + csio_setup_ddp(scsim, req); + } else { + csio_scsi_cmd(req); + } + + if (likely(req->drv_status == 0)) { + /* change state and enqueue on active_q */ + csio_set_state(&req->sm, csio_scsis_io_active); + list_add_tail(&req->sm.sm_list, &scsim->active_q); + csio_wr_issue(hw, req->eq_idx, false); + CSIO_INC_STATS(scsim, n_active); + + return; + } + break; + + case CSIO_SCSIE_START_TM: + csio_scsi_cmd(req); + if (req->drv_status == 0) { + /* + * NOTE: We collect the affected I/Os prior to issuing + * LUN reset, and not after it. This is to prevent + * aborting I/Os that get issued after the LUN reset, + * but prior to LUN reset completion (in the event that + * the host stack has not blocked I/Os to a LUN that is + * being reset. + */ + csio_set_state(&req->sm, csio_scsis_tm_active); + list_add_tail(&req->sm.sm_list, &scsim->active_q); + csio_wr_issue(hw, req->eq_idx, false); + CSIO_INC_STATS(scsim, n_tm_active); + } + return; + + case CSIO_SCSIE_ABORT: + case CSIO_SCSIE_CLOSE: + /* + * NOTE: + * We could get here due to : + * - a window in the cleanup path of the SCSI module + * (csio_scsi_abort_io()). Please see NOTE in this function. + * - a window in the time we tried to issue an abort/close + * of a request to FW, and the FW completed the request + * itself. + * Print a message for now, and return INVAL either way. + */ + req->drv_status = -EINVAL; + csio_warn(hw, "Trying to abort/close completed IO:%p!\n", req); + break; + + default: + csio_dbg(hw, "Unhandled event:%d sent to req:%p\n", evt, req); + CSIO_DB_ASSERT(0); + } +} + +static void +csio_scsis_io_active(struct csio_ioreq *req, enum csio_scsi_ev evt) +{ + struct csio_hw *hw = req->lnode->hwp; + struct csio_scsim *scm = csio_hw_to_scsim(hw); + struct csio_rnode *rn; + + switch (evt) { + case CSIO_SCSIE_COMPLETED: + CSIO_DEC_STATS(scm, n_active); + list_del_init(&req->sm.sm_list); + csio_set_state(&req->sm, csio_scsis_uninit); + /* + * In MSIX mode, with multiple queues, the SCSI compeltions + * could reach us sooner than the FW events sent to indicate + * I-T nexus loss (link down, remote device logo etc). We + * dont want to be returning such I/Os to the upper layer + * immediately, since we wouldnt have reported the I-T nexus + * loss itself. This forces us to serialize such completions + * with the reporting of the I-T nexus loss. Therefore, we + * internally queue up such up such completions in the rnode. + * The reporting of I-T nexus loss to the upper layer is then + * followed by the returning of I/Os in this internal queue. + * Having another state alongwith another queue helps us take + * actions for events such as ABORT received while we are + * in this rnode queue. + */ + if (unlikely(req->wr_status != FW_SUCCESS)) { + rn = req->rnode; + /* + * FW says remote device is lost, but rnode + * doesnt reflect it. + */ + if (csio_scsi_itnexus_loss_error(req->wr_status) && + csio_is_rnode_ready(rn)) { + csio_set_state(&req->sm, + csio_scsis_shost_cmpl_await); + list_add_tail(&req->sm.sm_list, + &rn->host_cmpl_q); + } + } + + break; + + case CSIO_SCSIE_ABORT: + csio_scsi_abrt_cls(req, SCSI_ABORT); + if (req->drv_status == 0) { + csio_wr_issue(hw, req->eq_idx, false); + csio_set_state(&req->sm, csio_scsis_aborting); + } + break; + + case CSIO_SCSIE_CLOSE: + csio_scsi_abrt_cls(req, SCSI_CLOSE); + if (req->drv_status == 0) { + csio_wr_issue(hw, req->eq_idx, false); + csio_set_state(&req->sm, csio_scsis_closing); + } + break; + + case CSIO_SCSIE_DRVCLEANUP: + req->wr_status = FW_HOSTERROR; + CSIO_DEC_STATS(scm, n_active); + csio_set_state(&req->sm, csio_scsis_uninit); + break; + + default: + csio_dbg(hw, "Unhandled event:%d sent to req:%p\n", evt, req); + CSIO_DB_ASSERT(0); + } +} + +static void +csio_scsis_tm_active(struct csio_ioreq *req, enum csio_scsi_ev evt) +{ + struct csio_hw *hw = req->lnode->hwp; + struct csio_scsim *scm = csio_hw_to_scsim(hw); + + switch (evt) { + case CSIO_SCSIE_COMPLETED: + CSIO_DEC_STATS(scm, n_tm_active); + list_del_init(&req->sm.sm_list); + csio_set_state(&req->sm, csio_scsis_uninit); + + break; + + case CSIO_SCSIE_ABORT: + csio_scsi_abrt_cls(req, SCSI_ABORT); + if (req->drv_status == 0) { + csio_wr_issue(hw, req->eq_idx, false); + csio_set_state(&req->sm, csio_scsis_aborting); + } + break; + + + case CSIO_SCSIE_CLOSE: + csio_scsi_abrt_cls(req, SCSI_CLOSE); + if (req->drv_status == 0) { + csio_wr_issue(hw, req->eq_idx, false); + csio_set_state(&req->sm, csio_scsis_closing); + } + break; + + case CSIO_SCSIE_DRVCLEANUP: + req->wr_status = FW_HOSTERROR; + CSIO_DEC_STATS(scm, n_tm_active); + csio_set_state(&req->sm, csio_scsis_uninit); + break; + + default: + csio_dbg(hw, "Unhandled event:%d sent to req:%p\n", evt, req); + CSIO_DB_ASSERT(0); + } +} + +static void +csio_scsis_aborting(struct csio_ioreq *req, enum csio_scsi_ev evt) +{ + struct csio_hw *hw = req->lnode->hwp; + struct csio_scsim *scm = csio_hw_to_scsim(hw); + + switch (evt) { + case CSIO_SCSIE_COMPLETED: + csio_dbg(hw, + "ioreq %p recvd cmpltd (wr_status:%d) " + "in aborting st\n", req, req->wr_status); + /* + * Use -ECANCELED to explicitly tell the ABORTED event that + * the original I/O was returned to driver by FW. + * We dont really care if the I/O was returned with success by + * FW (because the ABORT and completion of the I/O crossed each + * other), or any other return value. Once we are in aborting + * state, the success or failure of the I/O is unimportant to + * us. + */ + req->drv_status = -ECANCELED; + break; + + case CSIO_SCSIE_ABORT: + CSIO_INC_STATS(scm, n_abrt_dups); + break; + + case CSIO_SCSIE_ABORTED: + + csio_dbg(hw, "abort of %p return status:0x%x drv_status:%x\n", + req, req->wr_status, req->drv_status); + /* + * Check if original I/O WR completed before the Abort + * completion. + */ + if (req->drv_status != -ECANCELED) { + csio_warn(hw, + "Abort completed before original I/O," + " req:%p\n", req); + CSIO_DB_ASSERT(0); + } + + /* + * There are the following possible scenarios: + * 1. The abort completed successfully, FW returned FW_SUCCESS. + * 2. The completion of an I/O and the receipt of + * abort for that I/O by the FW crossed each other. + * The FW returned FW_EINVAL. The original I/O would have + * returned with FW_SUCCESS or any other SCSI error. + * 3. The FW couldnt sent the abort out on the wire, as there + * was an I-T nexus loss (link down, remote device logged + * out etc). FW sent back an appropriate IT nexus loss status + * for the abort. + * 4. FW sent an abort, but abort timed out (remote device + * didnt respond). FW replied back with + * FW_SCSI_ABORT_TIMEDOUT. + * 5. FW couldnt genuinely abort the request for some reason, + * and sent us an error. + * + * The first 3 scenarios are treated as succesful abort + * operations by the host, while the last 2 are failed attempts + * to abort. Manipulate the return value of the request + * appropriately, so that host can convey these results + * back to the upper layer. + */ + if ((req->wr_status == FW_SUCCESS) || + (req->wr_status == FW_EINVAL) || + csio_scsi_itnexus_loss_error(req->wr_status)) + req->wr_status = FW_SCSI_ABORT_REQUESTED; + + CSIO_DEC_STATS(scm, n_active); + list_del_init(&req->sm.sm_list); + csio_set_state(&req->sm, csio_scsis_uninit); + break; + + case CSIO_SCSIE_DRVCLEANUP: + req->wr_status = FW_HOSTERROR; + CSIO_DEC_STATS(scm, n_active); + csio_set_state(&req->sm, csio_scsis_uninit); + break; + + case CSIO_SCSIE_CLOSE: + /* + * We can receive this event from the module + * cleanup paths, if the FW forgot to reply to the ABORT WR + * and left this ioreq in this state. For now, just ignore + * the event. The CLOSE event is sent to this state, as + * the LINK may have already gone down. + */ + break; + + default: + csio_dbg(hw, "Unhandled event:%d sent to req:%p\n", evt, req); + CSIO_DB_ASSERT(0); + } +} + +static void +csio_scsis_closing(struct csio_ioreq *req, enum csio_scsi_ev evt) +{ + struct csio_hw *hw = req->lnode->hwp; + struct csio_scsim *scm = csio_hw_to_scsim(hw); + + switch (evt) { + case CSIO_SCSIE_COMPLETED: + csio_dbg(hw, + "ioreq %p recvd cmpltd (wr_status:%d) " + "in closing st\n", req, req->wr_status); + /* + * Use -ECANCELED to explicitly tell the CLOSED event that + * the original I/O was returned to driver by FW. + * We dont really care if the I/O was returned with success by + * FW (because the CLOSE and completion of the I/O crossed each + * other), or any other return value. Once we are in aborting + * state, the success or failure of the I/O is unimportant to + * us. + */ + req->drv_status = -ECANCELED; + break; + + case CSIO_SCSIE_CLOSED: + /* + * Check if original I/O WR completed before the Close + * completion. + */ + if (req->drv_status != -ECANCELED) { + csio_fatal(hw, + "Close completed before original I/O," + " req:%p\n", req); + CSIO_DB_ASSERT(0); + } + + /* + * Either close succeeded, or we issued close to FW at the + * same time FW compelted it to us. Either way, the I/O + * is closed. + */ + CSIO_DB_ASSERT((req->wr_status == FW_SUCCESS) || + (req->wr_status == FW_EINVAL)); + req->wr_status = FW_SCSI_CLOSE_REQUESTED; + + CSIO_DEC_STATS(scm, n_active); + list_del_init(&req->sm.sm_list); + csio_set_state(&req->sm, csio_scsis_uninit); + break; + + case CSIO_SCSIE_CLOSE: + break; + + case CSIO_SCSIE_DRVCLEANUP: + req->wr_status = FW_HOSTERROR; + CSIO_DEC_STATS(scm, n_active); + csio_set_state(&req->sm, csio_scsis_uninit); + break; + + default: + csio_dbg(hw, "Unhandled event:%d sent to req:%p\n", evt, req); + CSIO_DB_ASSERT(0); + } +} + +static void +csio_scsis_shost_cmpl_await(struct csio_ioreq *req, enum csio_scsi_ev evt) +{ + switch (evt) { + case CSIO_SCSIE_ABORT: + case CSIO_SCSIE_CLOSE: + /* + * Just succeed the abort request, and hope that + * the remote device unregister path will cleanup + * this I/O to the upper layer within a sane + * amount of time. + */ + /* + * A close can come in during a LINK DOWN. The FW would have + * returned us the I/O back, but not the remote device lost + * FW event. In this interval, if the I/O times out at the upper + * layer, a close can come in. Take the same action as abort: + * return success, and hope that the remote device unregister + * path will cleanup this I/O. If the FW still doesnt send + * the msg, the close times out, and the upper layer resorts + * to the next level of error recovery. + */ + req->drv_status = 0; + break; + case CSIO_SCSIE_DRVCLEANUP: + csio_set_state(&req->sm, csio_scsis_uninit); + break; + default: + csio_dbg(req->lnode->hwp, "Unhandled event:%d sent to req:%p\n", + evt, req); + CSIO_DB_ASSERT(0); + } +} + +/* + * csio_scsi_cmpl_handler - WR completion handler for SCSI. + * @hw: HW module. + * @wr: The completed WR from the ingress queue. + * @len: Length of the WR. + * @flb: Freelist buffer array. + * @priv: Private object + * @scsiwr: Pointer to SCSI WR. + * + * This is the WR completion handler called per completion from the + * ISR. It is called with lock held. It walks past the RSS and CPL message + * header where the actual WR is present. + * It then gets the status, WR handle (ioreq pointer) and the len of + * the WR, based on WR opcode. Only on a non-good status is the entire + * WR copied into the WR cache (ioreq->fw_wr). + * The ioreq corresponding to the WR is returned to the caller. + * NOTE: The SCSI queue doesnt allocate a freelist today, hence + * no freelist buffer is expected. + */ +struct csio_ioreq * +csio_scsi_cmpl_handler(struct csio_hw *hw, void *wr, uint32_t len, + struct csio_fl_dma_buf *flb, void *priv, uint8_t **scsiwr) +{ + struct csio_ioreq *ioreq = NULL; + struct cpl_fw6_msg *cpl; + uint8_t *tempwr; + uint8_t status; + struct csio_scsim *scm = csio_hw_to_scsim(hw); + + /* skip RSS header */ + cpl = (struct cpl_fw6_msg *)((uintptr_t)wr + sizeof(__be64)); + + if (unlikely(cpl->opcode != CPL_FW6_MSG)) { + csio_warn(hw, "Error: Invalid CPL msg %x recvd on SCSI q\n", + cpl->opcode); + CSIO_INC_STATS(scm, n_inval_cplop); + return NULL; + } + + tempwr = (uint8_t *)(cpl->data); + status = csio_wr_status(tempwr); + *scsiwr = tempwr; + + if (likely((*tempwr == FW_SCSI_READ_WR) || + (*tempwr == FW_SCSI_WRITE_WR) || + (*tempwr == FW_SCSI_CMD_WR))) { + ioreq = (struct csio_ioreq *)((uintptr_t) + (((struct fw_scsi_read_wr *)tempwr)->cookie)); + CSIO_DB_ASSERT(virt_addr_valid(ioreq)); + + ioreq->wr_status = status; + + return ioreq; + } + + if (*tempwr == FW_SCSI_ABRT_CLS_WR) { + ioreq = (struct csio_ioreq *)((uintptr_t) + (((struct fw_scsi_abrt_cls_wr *)tempwr)->cookie)); + CSIO_DB_ASSERT(virt_addr_valid(ioreq)); + + ioreq->wr_status = status; + return ioreq; + } + + csio_warn(hw, "WR with invalid opcode in SCSI IQ: %x\n", *tempwr); + CSIO_INC_STATS(scm, n_inval_scsiop); + return NULL; +} + +/* + * csio_scsi_cleanup_io_q - Cleanup the given queue. + * @scm: SCSI module. + * @q: Queue to be cleaned up. + * + * Called with lock held. Has to exit with lock held. + */ +void +csio_scsi_cleanup_io_q(struct csio_scsim *scm, struct list_head *q) +{ + struct csio_hw *hw = scm->hw; + struct csio_ioreq *ioreq; + struct list_head *tmp, *next; + struct scsi_cmnd *scmnd; + + /* Call back the completion routines of the active_q */ + list_for_each_safe(tmp, next, q) { + ioreq = (struct csio_ioreq *)tmp; + csio_scsi_drvcleanup(ioreq); + list_del_init(&ioreq->sm.sm_list); + scmnd = csio_scsi_cmnd(ioreq); + spin_unlock_irq(&hw->lock); + + /* + * Upper layers may have cleared this command, hence this + * check to avoid accessing stale references. + */ + if (scmnd != NULL) + ioreq->io_cbfn(hw, ioreq); + + spin_lock_irq(&scm->freelist_lock); + csio_put_scsi_ioreq(scm, ioreq); + spin_unlock_irq(&scm->freelist_lock); + + spin_lock_irq(&hw->lock); + } +} + +#define CSIO_SCSI_ABORT_Q_POLL_MS 2000 + +static void +csio_abrt_cls(struct csio_ioreq *ioreq, struct scsi_cmnd *scmnd) +{ + struct csio_lnode *ln = ioreq->lnode; + struct csio_hw *hw = ln->hwp; + int ready = 0; + struct csio_scsim *scsim = csio_hw_to_scsim(hw); + int rv; + + if (csio_scsi_cmnd(ioreq) != scmnd) { + CSIO_INC_STATS(scsim, n_abrt_race_comp); + return; + } + + ready = csio_is_lnode_ready(ln); + + rv = csio_do_abrt_cls(hw, ioreq, (ready ? SCSI_ABORT : SCSI_CLOSE)); + if (rv != 0) { + if (ready) + CSIO_INC_STATS(scsim, n_abrt_busy_error); + else + CSIO_INC_STATS(scsim, n_cls_busy_error); + } +} + +/* + * csio_scsi_abort_io_q - Abort all I/Os on given queue + * @scm: SCSI module. + * @q: Queue to abort. + * @tmo: Timeout in ms + * + * Attempt to abort all I/Os on given queue, and wait for a max + * of tmo milliseconds for them to complete. Returns success + * if all I/Os are aborted. Else returns -ETIMEDOUT. + * Should be entered with lock held. Exits with lock held. + * NOTE: + * Lock has to be held across the loop that aborts I/Os, since dropping the lock + * in between can cause the list to be corrupted. As a result, the caller + * of this function has to ensure that the number of I/os to be aborted + * is finite enough to not cause lock-held-for-too-long issues. + */ +static int +csio_scsi_abort_io_q(struct csio_scsim *scm, struct list_head *q, uint32_t tmo) +{ + struct csio_hw *hw = scm->hw; + struct list_head *tmp, *next; + int count = DIV_ROUND_UP(tmo, CSIO_SCSI_ABORT_Q_POLL_MS); + struct scsi_cmnd *scmnd; + + if (list_empty(q)) + return 0; + + csio_dbg(hw, "Aborting SCSI I/Os\n"); + + /* Now abort/close I/Os in the queue passed */ + list_for_each_safe(tmp, next, q) { + scmnd = csio_scsi_cmnd((struct csio_ioreq *)tmp); + csio_abrt_cls((struct csio_ioreq *)tmp, scmnd); + } + + /* Wait till all active I/Os are completed/aborted/closed */ + while (!list_empty(q) && count--) { + spin_unlock_irq(&hw->lock); + msleep(CSIO_SCSI_ABORT_Q_POLL_MS); + spin_lock_irq(&hw->lock); + } + + /* all aborts completed */ + if (list_empty(q)) + return 0; + + return -ETIMEDOUT; +} + +/* + * csio_scsim_cleanup_io - Cleanup all I/Os in SCSI module. + * @scm: SCSI module. + * @abort: abort required. + * Called with lock held, should exit with lock held. + * Can sleep when waiting for I/Os to complete. + */ +int +csio_scsim_cleanup_io(struct csio_scsim *scm, bool abort) +{ + struct csio_hw *hw = scm->hw; + int rv = 0; + int count = DIV_ROUND_UP(60 * 1000, CSIO_SCSI_ABORT_Q_POLL_MS); + + /* No I/Os pending */ + if (list_empty(&scm->active_q)) + return 0; + + /* Wait until all active I/Os are completed */ + while (!list_empty(&scm->active_q) && count--) { + spin_unlock_irq(&hw->lock); + msleep(CSIO_SCSI_ABORT_Q_POLL_MS); + spin_lock_irq(&hw->lock); + } + + /* all I/Os completed */ + if (list_empty(&scm->active_q)) + return 0; + + /* Else abort */ + if (abort) { + rv = csio_scsi_abort_io_q(scm, &scm->active_q, 30000); + if (rv == 0) + return rv; + csio_dbg(hw, "Some I/O aborts timed out, cleaning up..\n"); + } + + csio_scsi_cleanup_io_q(scm, &scm->active_q); + + CSIO_DB_ASSERT(list_empty(&scm->active_q)); + + return rv; +} + +/* + * csio_scsim_cleanup_io_lnode - Cleanup all I/Os of given lnode. + * @scm: SCSI module. + * @lnode: lnode + * + * Called with lock held, should exit with lock held. + * Can sleep (with dropped lock) when waiting for I/Os to complete. + */ +int +csio_scsim_cleanup_io_lnode(struct csio_scsim *scm, struct csio_lnode *ln) +{ + struct csio_hw *hw = scm->hw; + struct csio_scsi_level_data sld; + int rv; + int count = DIV_ROUND_UP(60 * 1000, CSIO_SCSI_ABORT_Q_POLL_MS); + + csio_dbg(hw, "Gathering all SCSI I/Os on lnode %p\n", ln); + + sld.level = CSIO_LEV_LNODE; + sld.lnode = ln; + INIT_LIST_HEAD(&ln->cmpl_q); + csio_scsi_gather_active_ios(scm, &sld, &ln->cmpl_q); + + /* No I/Os pending on this lnode */ + if (list_empty(&ln->cmpl_q)) + return 0; + + /* Wait until all active I/Os on this lnode are completed */ + while (!list_empty(&ln->cmpl_q) && count--) { + spin_unlock_irq(&hw->lock); + msleep(CSIO_SCSI_ABORT_Q_POLL_MS); + spin_lock_irq(&hw->lock); + } + + /* all I/Os completed */ + if (list_empty(&ln->cmpl_q)) + return 0; + + csio_dbg(hw, "Some I/Os pending on ln:%p, aborting them..\n", ln); + + /* I/Os are pending, abort them */ + rv = csio_scsi_abort_io_q(scm, &ln->cmpl_q, 30000); + if (rv != 0) { + csio_dbg(hw, "Some I/O aborts timed out, cleaning up..\n"); + csio_scsi_cleanup_io_q(scm, &ln->cmpl_q); + } + + CSIO_DB_ASSERT(list_empty(&ln->cmpl_q)); + + return rv; +} + +static ssize_t +csio_show_hw_state(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct csio_lnode *ln = shost_priv(class_to_shost(dev)); + struct csio_hw *hw = csio_lnode_to_hw(ln); + + if (csio_is_hw_ready(hw)) + return snprintf(buf, PAGE_SIZE, "ready\n"); + else + return snprintf(buf, PAGE_SIZE, "not ready\n"); +} + +/* Device reset */ +static ssize_t +csio_device_reset(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct csio_lnode *ln = shost_priv(class_to_shost(dev)); + struct csio_hw *hw = csio_lnode_to_hw(ln); + + if (*buf != '1') + return -EINVAL; + + /* Delete NPIV lnodes */ + csio_lnodes_exit(hw, 1); + + /* Block upper IOs */ + csio_lnodes_block_request(hw); + + spin_lock_irq(&hw->lock); + csio_hw_reset(hw); + spin_unlock_irq(&hw->lock); + + /* Unblock upper IOs */ + csio_lnodes_unblock_request(hw); + return count; +} + +/* disable port */ +static ssize_t +csio_disable_port(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct csio_lnode *ln = shost_priv(class_to_shost(dev)); + struct csio_hw *hw = csio_lnode_to_hw(ln); + bool disable; + + if (*buf == '1' || *buf == '0') + disable = (*buf == '1') ? true : false; + else + return -EINVAL; + + /* Block upper IOs */ + csio_lnodes_block_by_port(hw, ln->portid); + + spin_lock_irq(&hw->lock); + csio_disable_lnodes(hw, ln->portid, disable); + spin_unlock_irq(&hw->lock); + + /* Unblock upper IOs */ + csio_lnodes_unblock_by_port(hw, ln->portid); + return count; +} + +/* Show debug level */ +static ssize_t +csio_show_dbg_level(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct csio_lnode *ln = shost_priv(class_to_shost(dev)); + + return snprintf(buf, PAGE_SIZE, "%x\n", ln->params.log_level); +} + +/* Store debug level */ +static ssize_t +csio_store_dbg_level(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct csio_lnode *ln = shost_priv(class_to_shost(dev)); + struct csio_hw *hw = csio_lnode_to_hw(ln); + uint32_t dbg_level = 0; + + if (!isdigit(buf[0])) + return -EINVAL; + + if (sscanf(buf, "%i", &dbg_level)) + return -EINVAL; + + ln->params.log_level = dbg_level; + hw->params.log_level = dbg_level; + + return 0; +} + +static DEVICE_ATTR(hw_state, S_IRUGO, csio_show_hw_state, NULL); +static DEVICE_ATTR(device_reset, S_IRUGO | S_IWUSR, NULL, csio_device_reset); +static DEVICE_ATTR(disable_port, S_IRUGO | S_IWUSR, NULL, csio_disable_port); +static DEVICE_ATTR(dbg_level, S_IRUGO | S_IWUSR, csio_show_dbg_level, + csio_store_dbg_level); + +static struct device_attribute *csio_fcoe_lport_attrs[] = { + &dev_attr_hw_state, + &dev_attr_device_reset, + &dev_attr_disable_port, + &dev_attr_dbg_level, + NULL, +}; + +static ssize_t +csio_show_num_reg_rnodes(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct csio_lnode *ln = shost_priv(class_to_shost(dev)); + + return snprintf(buf, PAGE_SIZE, "%d\n", ln->num_reg_rnodes); +} + +static DEVICE_ATTR(num_reg_rnodes, S_IRUGO, csio_show_num_reg_rnodes, NULL); + +static struct device_attribute *csio_fcoe_vport_attrs[] = { + &dev_attr_num_reg_rnodes, + &dev_attr_dbg_level, + NULL, +}; + +static inline uint32_t +csio_scsi_copy_to_sgl(struct csio_hw *hw, struct csio_ioreq *req) +{ + struct scsi_cmnd *scmnd = (struct scsi_cmnd *)csio_scsi_cmnd(req); + struct scatterlist *sg; + uint32_t bytes_left; + uint32_t bytes_copy; + uint32_t buf_off = 0; + uint32_t start_off = 0; + uint32_t sg_off = 0; + void *sg_addr; + void *buf_addr; + struct csio_dma_buf *dma_buf; + + bytes_left = scsi_bufflen(scmnd); + sg = scsi_sglist(scmnd); + dma_buf = (struct csio_dma_buf *)csio_list_next(&req->gen_list); + + /* Copy data from driver buffer to SGs of SCSI CMD */ + while (bytes_left > 0 && sg && dma_buf) { + if (buf_off >= dma_buf->len) { + buf_off = 0; + dma_buf = (struct csio_dma_buf *) + csio_list_next(dma_buf); + continue; + } + + if (start_off >= sg->length) { + start_off -= sg->length; + sg = sg_next(sg); + continue; + } + + buf_addr = dma_buf->vaddr + buf_off; + sg_off = sg->offset + start_off; + bytes_copy = min((dma_buf->len - buf_off), + sg->length - start_off); + bytes_copy = min((uint32_t)(PAGE_SIZE - (sg_off & ~PAGE_MASK)), + bytes_copy); + + sg_addr = kmap_atomic(sg_page(sg) + (sg_off >> PAGE_SHIFT)); + if (!sg_addr) { + csio_err(hw, "failed to kmap sg:%p of ioreq:%p\n", + sg, req); + break; + } + + csio_dbg(hw, "copy_to_sgl:sg_addr %p sg_off %d buf %p len %d\n", + sg_addr, sg_off, buf_addr, bytes_copy); + memcpy(sg_addr + (sg_off & ~PAGE_MASK), buf_addr, bytes_copy); + kunmap_atomic(sg_addr); + + start_off += bytes_copy; + buf_off += bytes_copy; + bytes_left -= bytes_copy; + } + + if (bytes_left > 0) + return DID_ERROR; + else + return DID_OK; +} + +/* + * csio_scsi_err_handler - SCSI error handler. + * @hw: HW module. + * @req: IO request. + * + */ +static inline void +csio_scsi_err_handler(struct csio_hw *hw, struct csio_ioreq *req) +{ + struct scsi_cmnd *cmnd = (struct scsi_cmnd *)csio_scsi_cmnd(req); + struct csio_scsim *scm = csio_hw_to_scsim(hw); + struct fcp_resp_with_ext *fcp_resp; + struct fcp_resp_rsp_info *rsp_info; + struct csio_dma_buf *dma_buf; + uint8_t flags, scsi_status = 0; + uint32_t host_status = DID_OK; + uint32_t rsp_len = 0, sns_len = 0; + struct csio_rnode *rn = (struct csio_rnode *)(cmnd->device->hostdata); + + + switch (req->wr_status) { + case FW_HOSTERROR: + if (unlikely(!csio_is_hw_ready(hw))) + return; + + host_status = DID_ERROR; + CSIO_INC_STATS(scm, n_hosterror); + + break; + case FW_SCSI_RSP_ERR: + dma_buf = &req->dma_buf; + fcp_resp = (struct fcp_resp_with_ext *)dma_buf->vaddr; + rsp_info = (struct fcp_resp_rsp_info *)(fcp_resp + 1); + flags = fcp_resp->resp.fr_flags; + scsi_status = fcp_resp->resp.fr_status; + + if (flags & FCP_RSP_LEN_VAL) { + rsp_len = be32_to_cpu(fcp_resp->ext.fr_rsp_len); + if ((rsp_len != 0 && rsp_len != 4 && rsp_len != 8) || + (rsp_info->rsp_code != FCP_TMF_CMPL)) { + host_status = DID_ERROR; + goto out; + } + } + + if ((flags & FCP_SNS_LEN_VAL) && fcp_resp->ext.fr_sns_len) { + sns_len = be32_to_cpu(fcp_resp->ext.fr_sns_len); + if (sns_len > SCSI_SENSE_BUFFERSIZE) + sns_len = SCSI_SENSE_BUFFERSIZE; + + memcpy(cmnd->sense_buffer, + &rsp_info->_fr_resvd[0] + rsp_len, sns_len); + CSIO_INC_STATS(scm, n_autosense); + } + + scsi_set_resid(cmnd, 0); + + /* Under run */ + if (flags & FCP_RESID_UNDER) { + scsi_set_resid(cmnd, + be32_to_cpu(fcp_resp->ext.fr_resid)); + + if (!(flags & FCP_SNS_LEN_VAL) && + (scsi_status == SAM_STAT_GOOD) && + ((scsi_bufflen(cmnd) - scsi_get_resid(cmnd)) + < cmnd->underflow)) + host_status = DID_ERROR; + } else if (flags & FCP_RESID_OVER) + host_status = DID_ERROR; + + CSIO_INC_STATS(scm, n_rsperror); + break; + + case FW_SCSI_OVER_FLOW_ERR: + csio_warn(hw, + "Over-flow error,cmnd:0x%x expected len:0x%x" + " resid:0x%x\n", cmnd->cmnd[0], + scsi_bufflen(cmnd), scsi_get_resid(cmnd)); + host_status = DID_ERROR; + CSIO_INC_STATS(scm, n_ovflerror); + break; + + case FW_SCSI_UNDER_FLOW_ERR: + csio_warn(hw, + "Under-flow error,cmnd:0x%x expected" + " len:0x%x resid:0x%x lun:0x%x ssn:0x%x\n", + cmnd->cmnd[0], scsi_bufflen(cmnd), + scsi_get_resid(cmnd), cmnd->device->lun, + rn->flowid); + host_status = DID_ERROR; + CSIO_INC_STATS(scm, n_unflerror); + break; + + case FW_SCSI_ABORT_REQUESTED: + case FW_SCSI_ABORTED: + case FW_SCSI_CLOSE_REQUESTED: + csio_dbg(hw, "Req %p cmd:%p op:%x %s\n", req, cmnd, + cmnd->cmnd[0], + (req->wr_status == FW_SCSI_CLOSE_REQUESTED) ? + "closed" : "aborted"); + /* + * csio_eh_abort_handler checks this value to + * succeed or fail the abort request. + */ + host_status = DID_REQUEUE; + if (req->wr_status == FW_SCSI_CLOSE_REQUESTED) + CSIO_INC_STATS(scm, n_closed); + else + CSIO_INC_STATS(scm, n_aborted); + break; + + case FW_SCSI_ABORT_TIMEDOUT: + /* FW timed out the abort itself */ + csio_dbg(hw, "FW timed out abort req:%p cmnd:%p status:%x\n", + req, cmnd, req->wr_status); + host_status = DID_ERROR; + CSIO_INC_STATS(scm, n_abrt_timedout); + break; + + case FW_RDEV_NOT_READY: + /* + * In firmware, a RDEV can get into this state + * temporarily, before moving into dissapeared/lost + * state. So, the driver should complete the request equivalent + * to device-disappeared! + */ + CSIO_INC_STATS(scm, n_rdev_nr_error); + host_status = DID_ERROR; + break; + + case FW_ERR_RDEV_LOST: + CSIO_INC_STATS(scm, n_rdev_lost_error); + host_status = DID_ERROR; + break; + + case FW_ERR_RDEV_LOGO: + CSIO_INC_STATS(scm, n_rdev_logo_error); + host_status = DID_ERROR; + break; + + case FW_ERR_RDEV_IMPL_LOGO: + host_status = DID_ERROR; + break; + + case FW_ERR_LINK_DOWN: + CSIO_INC_STATS(scm, n_link_down_error); + host_status = DID_ERROR; + break; + + case FW_FCOE_NO_XCHG: + CSIO_INC_STATS(scm, n_no_xchg_error); + host_status = DID_ERROR; + break; + + default: + csio_err(hw, "Unknown SCSI FW WR status:%d req:%p cmnd:%p\n", + req->wr_status, req, cmnd); + CSIO_DB_ASSERT(0); + + CSIO_INC_STATS(scm, n_unknown_error); + host_status = DID_ERROR; + break; + } + +out: + if (req->nsge > 0) + scsi_dma_unmap(cmnd); + + cmnd->result = (((host_status) << 16) | scsi_status); + cmnd->scsi_done(cmnd); + + /* Wake up waiting threads */ + csio_scsi_cmnd(req) = NULL; + complete_all(&req->cmplobj); +} + +/* + * csio_scsi_cbfn - SCSI callback function. + * @hw: HW module. + * @req: IO request. + * + */ +static void +csio_scsi_cbfn(struct csio_hw *hw, struct csio_ioreq *req) +{ + struct scsi_cmnd *cmnd = (struct scsi_cmnd *)csio_scsi_cmnd(req); + uint8_t scsi_status = SAM_STAT_GOOD; + uint32_t host_status = DID_OK; + + if (likely(req->wr_status == FW_SUCCESS)) { + if (req->nsge > 0) { + scsi_dma_unmap(cmnd); + if (req->dcopy) + host_status = csio_scsi_copy_to_sgl(hw, req); + } + + cmnd->result = (((host_status) << 16) | scsi_status); + cmnd->scsi_done(cmnd); + csio_scsi_cmnd(req) = NULL; + CSIO_INC_STATS(csio_hw_to_scsim(hw), n_tot_success); + } else { + /* Error handling */ + csio_scsi_err_handler(hw, req); + } +} + +/** + * csio_queuecommand - Entry point to kickstart an I/O request. + * @host: The scsi_host pointer. + * @cmnd: The I/O request from ML. + * + * This routine does the following: + * - Checks for HW and Rnode module readiness. + * - Gets a free ioreq structure (which is already initialized + * to uninit during its allocation). + * - Maps SG elements. + * - Initializes ioreq members. + * - Kicks off the SCSI state machine for this IO. + * - Returns busy status on error. + */ +static int +csio_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmnd) +{ + struct csio_lnode *ln = shost_priv(host); + struct csio_hw *hw = csio_lnode_to_hw(ln); + struct csio_scsim *scsim = csio_hw_to_scsim(hw); + struct csio_rnode *rn = (struct csio_rnode *)(cmnd->device->hostdata); + struct csio_ioreq *ioreq = NULL; + unsigned long flags; + int nsge = 0; + int rv = SCSI_MLQUEUE_HOST_BUSY, nr; + int retval; + int cpu; + struct csio_scsi_qset *sqset; + struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device)); + + if (!blk_rq_cpu_valid(cmnd->request)) + cpu = smp_processor_id(); + else + cpu = cmnd->request->cpu; + + sqset = &hw->sqset[ln->portid][cpu]; + + nr = fc_remote_port_chkready(rport); + if (nr) { + cmnd->result = nr; + CSIO_INC_STATS(scsim, n_rn_nr_error); + goto err_done; + } + + if (unlikely(!csio_is_hw_ready(hw))) { + cmnd->result = (DID_REQUEUE << 16); + CSIO_INC_STATS(scsim, n_hw_nr_error); + goto err_done; + } + + /* Get req->nsge, if there are SG elements to be mapped */ + nsge = scsi_dma_map(cmnd); + if (unlikely(nsge < 0)) { + CSIO_INC_STATS(scsim, n_dmamap_error); + goto err; + } + + /* Do we support so many mappings? */ + if (unlikely(nsge > scsim->max_sge)) { + csio_warn(hw, + "More SGEs than can be supported." + " SGEs: %d, Max SGEs: %d\n", nsge, scsim->max_sge); + CSIO_INC_STATS(scsim, n_unsupp_sge_error); + goto err_dma_unmap; + } + + /* Get a free ioreq structure - SM is already set to uninit */ + ioreq = csio_get_scsi_ioreq_lock(hw, scsim); + if (!ioreq) { + csio_err(hw, "Out of I/O request elements. Active #:%d\n", + scsim->stats.n_active); + CSIO_INC_STATS(scsim, n_no_req_error); + goto err_dma_unmap; + } + + ioreq->nsge = nsge; + ioreq->lnode = ln; + ioreq->rnode = rn; + ioreq->iq_idx = sqset->iq_idx; + ioreq->eq_idx = sqset->eq_idx; + ioreq->wr_status = 0; + ioreq->drv_status = 0; + csio_scsi_cmnd(ioreq) = (void *)cmnd; + ioreq->tmo = 0; + ioreq->datadir = cmnd->sc_data_direction; + + if (cmnd->sc_data_direction == DMA_TO_DEVICE) { + CSIO_INC_STATS(ln, n_output_requests); + ln->stats.n_output_bytes += scsi_bufflen(cmnd); + } else if (cmnd->sc_data_direction == DMA_FROM_DEVICE) { + CSIO_INC_STATS(ln, n_input_requests); + ln->stats.n_input_bytes += scsi_bufflen(cmnd); + } else + CSIO_INC_STATS(ln, n_control_requests); + + /* Set cbfn */ + ioreq->io_cbfn = csio_scsi_cbfn; + + /* Needed during abort */ + cmnd->host_scribble = (unsigned char *)ioreq; + cmnd->SCp.Message = 0; + + /* Kick off SCSI IO SM on the ioreq */ + spin_lock_irqsave(&hw->lock, flags); + retval = csio_scsi_start_io(ioreq); + spin_unlock_irqrestore(&hw->lock, flags); + + if (retval != 0) { + csio_err(hw, "ioreq: %p couldnt be started, status:%d\n", + ioreq, retval); + CSIO_INC_STATS(scsim, n_busy_error); + goto err_put_req; + } + + return 0; + +err_put_req: + csio_put_scsi_ioreq_lock(hw, scsim, ioreq); +err_dma_unmap: + if (nsge > 0) + scsi_dma_unmap(cmnd); +err: + return rv; + +err_done: + cmnd->scsi_done(cmnd); + return 0; +} + +static int +csio_do_abrt_cls(struct csio_hw *hw, struct csio_ioreq *ioreq, bool abort) +{ + int rv; + int cpu = smp_processor_id(); + struct csio_lnode *ln = ioreq->lnode; + struct csio_scsi_qset *sqset = &hw->sqset[ln->portid][cpu]; + + ioreq->tmo = CSIO_SCSI_ABRT_TMO_MS; + /* + * Use current processor queue for posting the abort/close, but retain + * the ingress queue ID of the original I/O being aborted/closed - we + * need the abort/close completion to be received on the same queue + * as the original I/O. + */ + ioreq->eq_idx = sqset->eq_idx; + + if (abort == SCSI_ABORT) + rv = csio_scsi_abort(ioreq); + else + rv = csio_scsi_close(ioreq); + + return rv; +} + +static int +csio_eh_abort_handler(struct scsi_cmnd *cmnd) +{ + struct csio_ioreq *ioreq; + struct csio_lnode *ln = shost_priv(cmnd->device->host); + struct csio_hw *hw = csio_lnode_to_hw(ln); + struct csio_scsim *scsim = csio_hw_to_scsim(hw); + int ready = 0, ret; + unsigned long tmo = 0; + int rv; + struct csio_rnode *rn = (struct csio_rnode *)(cmnd->device->hostdata); + + ret = fc_block_scsi_eh(cmnd); + if (ret) + return ret; + + ioreq = (struct csio_ioreq *)cmnd->host_scribble; + if (!ioreq) + return SUCCESS; + + if (!rn) + return FAILED; + + csio_dbg(hw, + "Request to abort ioreq:%p cmd:%p cdb:%08llx" + " ssni:0x%x lun:%d iq:0x%x\n", + ioreq, cmnd, *((uint64_t *)cmnd->cmnd), rn->flowid, + cmnd->device->lun, csio_q_physiqid(hw, ioreq->iq_idx)); + + if (((struct scsi_cmnd *)csio_scsi_cmnd(ioreq)) != cmnd) { + CSIO_INC_STATS(scsim, n_abrt_race_comp); + return SUCCESS; + } + + ready = csio_is_lnode_ready(ln); + tmo = CSIO_SCSI_ABRT_TMO_MS; + + spin_lock_irq(&hw->lock); + rv = csio_do_abrt_cls(hw, ioreq, (ready ? SCSI_ABORT : SCSI_CLOSE)); + spin_unlock_irq(&hw->lock); + + if (rv != 0) { + if (rv == -EINVAL) { + /* Return success, if abort/close request issued on + * already completed IO + */ + return SUCCESS; + } + if (ready) + CSIO_INC_STATS(scsim, n_abrt_busy_error); + else + CSIO_INC_STATS(scsim, n_cls_busy_error); + + goto inval_scmnd; + } + + /* Wait for completion */ + init_completion(&ioreq->cmplobj); + wait_for_completion_timeout(&ioreq->cmplobj, msecs_to_jiffies(tmo)); + + /* FW didnt respond to abort within our timeout */ + if (((struct scsi_cmnd *)csio_scsi_cmnd(ioreq)) == cmnd) { + + csio_err(hw, "Abort timed out -- req: %p\n", ioreq); + CSIO_INC_STATS(scsim, n_abrt_timedout); + +inval_scmnd: + if (ioreq->nsge > 0) + scsi_dma_unmap(cmnd); + + spin_lock_irq(&hw->lock); + csio_scsi_cmnd(ioreq) = NULL; + spin_unlock_irq(&hw->lock); + + cmnd->result = (DID_ERROR << 16); + cmnd->scsi_done(cmnd); + + return FAILED; + } + + /* FW successfully aborted the request */ + if (host_byte(cmnd->result) == DID_REQUEUE) { + csio_info(hw, + "Aborted SCSI command to (%d:%d) serial#:0x%lx\n", + cmnd->device->id, cmnd->device->lun, + cmnd->serial_number); + return SUCCESS; + } else { + csio_info(hw, + "Failed to abort SCSI command, (%d:%d) serial#:0x%lx\n", + cmnd->device->id, cmnd->device->lun, + cmnd->serial_number); + return FAILED; + } +} + +/* + * csio_tm_cbfn - TM callback function. + * @hw: HW module. + * @req: IO request. + * + * Cache the result in 'cmnd', since ioreq will be freed soon + * after we return from here, and the waiting thread shouldnt trust + * the ioreq contents. + */ +static void +csio_tm_cbfn(struct csio_hw *hw, struct csio_ioreq *req) +{ + struct scsi_cmnd *cmnd = (struct scsi_cmnd *)csio_scsi_cmnd(req); + struct csio_dma_buf *dma_buf; + uint8_t flags = 0; + struct fcp_resp_with_ext *fcp_resp; + struct fcp_resp_rsp_info *rsp_info; + + csio_dbg(hw, "req: %p in csio_tm_cbfn status: %d\n", + req, req->wr_status); + + /* Cache FW return status */ + cmnd->SCp.Status = req->wr_status; + + /* Special handling based on FCP response */ + + /* + * FW returns us this error, if flags were set. FCP4 says + * FCP_RSP_LEN_VAL in flags shall be set for TM completions. + * So if a target were to set this bit, we expect that the + * rsp_code is set to FCP_TMF_CMPL for a successful TM + * completion. Any other rsp_code means TM operation failed. + * If a target were to just ignore setting flags, we treat + * the TM operation as success, and FW returns FW_SUCCESS. + */ + if (req->wr_status == FW_SCSI_RSP_ERR) { + dma_buf = &req->dma_buf; + fcp_resp = (struct fcp_resp_with_ext *)dma_buf->vaddr; + rsp_info = (struct fcp_resp_rsp_info *)(fcp_resp + 1); + + flags = fcp_resp->resp.fr_flags; + + /* Modify return status if flags indicate success */ + if (flags & FCP_RSP_LEN_VAL) + if (rsp_info->rsp_code == FCP_TMF_CMPL) + cmnd->SCp.Status = FW_SUCCESS; + + csio_dbg(hw, "TM FCP rsp code: %d\n", rsp_info->rsp_code); + } + + /* Wake up the TM handler thread */ + csio_scsi_cmnd(req) = NULL; +} + +static int +csio_eh_lun_reset_handler(struct scsi_cmnd *cmnd) +{ + struct csio_lnode *ln = shost_priv(cmnd->device->host); + struct csio_hw *hw = csio_lnode_to_hw(ln); + struct csio_scsim *scsim = csio_hw_to_scsim(hw); + struct csio_rnode *rn = (struct csio_rnode *)(cmnd->device->hostdata); + struct csio_ioreq *ioreq = NULL; + struct csio_scsi_qset *sqset; + unsigned long flags; + int retval; + int count, ret; + LIST_HEAD(local_q); + struct csio_scsi_level_data sld; + + if (!rn) + goto fail; + + csio_dbg(hw, "Request to reset LUN:%d (ssni:0x%x tgtid:%d)\n", + cmnd->device->lun, rn->flowid, rn->scsi_id); + + if (!csio_is_lnode_ready(ln)) { + csio_err(hw, + "LUN reset cannot be issued on non-ready" + " local node vnpi:0x%x (LUN:%d)\n", + ln->vnp_flowid, cmnd->device->lun); + goto fail; + } + + /* Lnode is ready, now wait on rport node readiness */ + ret = fc_block_scsi_eh(cmnd); + if (ret) + return ret; + + /* + * If we have blocked in the previous call, at this point, either the + * remote node has come back online, or device loss timer has fired + * and the remote node is destroyed. Allow the LUN reset only for + * the former case, since LUN reset is a TMF I/O on the wire, and we + * need a valid session to issue it. + */ + if (fc_remote_port_chkready(rn->rport)) { + csio_err(hw, + "LUN reset cannot be issued on non-ready" + " remote node ssni:0x%x (LUN:%d)\n", + rn->flowid, cmnd->device->lun); + goto fail; + } + + /* Get a free ioreq structure - SM is already set to uninit */ + ioreq = csio_get_scsi_ioreq_lock(hw, scsim); + + if (!ioreq) { + csio_err(hw, "Out of IO request elements. Active # :%d\n", + scsim->stats.n_active); + goto fail; + } + + sqset = &hw->sqset[ln->portid][smp_processor_id()]; + ioreq->nsge = 0; + ioreq->lnode = ln; + ioreq->rnode = rn; + ioreq->iq_idx = sqset->iq_idx; + ioreq->eq_idx = sqset->eq_idx; + + csio_scsi_cmnd(ioreq) = cmnd; + cmnd->host_scribble = (unsigned char *)ioreq; + cmnd->SCp.Status = 0; + + cmnd->SCp.Message = FCP_TMF_LUN_RESET; + ioreq->tmo = CSIO_SCSI_LUNRST_TMO_MS / 1000; + + /* + * FW times the LUN reset for ioreq->tmo, so we got to wait a little + * longer (10s for now) than that to allow FW to return the timed + * out command. + */ + count = DIV_ROUND_UP((ioreq->tmo + 10) * 1000, CSIO_SCSI_TM_POLL_MS); + + /* Set cbfn */ + ioreq->io_cbfn = csio_tm_cbfn; + + /* Save of the ioreq info for later use */ + sld.level = CSIO_LEV_LUN; + sld.lnode = ioreq->lnode; + sld.rnode = ioreq->rnode; + sld.oslun = (uint64_t)cmnd->device->lun; + + spin_lock_irqsave(&hw->lock, flags); + /* Kick off TM SM on the ioreq */ + retval = csio_scsi_start_tm(ioreq); + spin_unlock_irqrestore(&hw->lock, flags); + + if (retval != 0) { + csio_err(hw, "Failed to issue LUN reset, req:%p, status:%d\n", + ioreq, retval); + goto fail_ret_ioreq; + } + + csio_dbg(hw, "Waiting max %d secs for LUN reset completion\n", + count * (CSIO_SCSI_TM_POLL_MS / 1000)); + /* Wait for completion */ + while ((((struct scsi_cmnd *)csio_scsi_cmnd(ioreq)) == cmnd) + && count--) + msleep(CSIO_SCSI_TM_POLL_MS); + + /* LUN reset timed-out */ + if (((struct scsi_cmnd *)csio_scsi_cmnd(ioreq)) == cmnd) { + csio_err(hw, "LUN reset (%d:%d) timed out\n", + cmnd->device->id, cmnd->device->lun); + + spin_lock_irq(&hw->lock); + csio_scsi_drvcleanup(ioreq); + list_del_init(&ioreq->sm.sm_list); + spin_unlock_irq(&hw->lock); + + goto fail_ret_ioreq; + } + + /* LUN reset returned, check cached status */ + if (cmnd->SCp.Status != FW_SUCCESS) { + csio_err(hw, "LUN reset failed (%d:%d), status: %d\n", + cmnd->device->id, cmnd->device->lun, cmnd->SCp.Status); + goto fail; + } + + /* LUN reset succeeded, Start aborting affected I/Os */ + /* + * Since the host guarantees during LUN reset that there + * will not be any more I/Os to that LUN, until the LUN reset + * completes, we gather pending I/Os after the LUN reset. + */ + spin_lock_irq(&hw->lock); + csio_scsi_gather_active_ios(scsim, &sld, &local_q); + + retval = csio_scsi_abort_io_q(scsim, &local_q, 30000); + spin_unlock_irq(&hw->lock); + + /* Aborts may have timed out */ + if (retval != 0) { + csio_err(hw, + "Attempt to abort I/Os during LUN reset of %d" + " returned %d\n", cmnd->device->lun, retval); + /* Return I/Os back to active_q */ + spin_lock_irq(&hw->lock); + list_splice_tail_init(&local_q, &scsim->active_q); + spin_unlock_irq(&hw->lock); + goto fail; + } + + CSIO_INC_STATS(rn, n_lun_rst); + + csio_info(hw, "LUN reset occurred (%d:%d)\n", + cmnd->device->id, cmnd->device->lun); + + return SUCCESS; + +fail_ret_ioreq: + csio_put_scsi_ioreq_lock(hw, scsim, ioreq); +fail: + CSIO_INC_STATS(rn, n_lun_rst_fail); + return FAILED; +} + +static int +csio_slave_alloc(struct scsi_device *sdev) +{ + struct fc_rport *rport = starget_to_rport(scsi_target(sdev)); + + if (!rport || fc_remote_port_chkready(rport)) + return -ENXIO; + + sdev->hostdata = *((struct csio_lnode **)(rport->dd_data)); + + return 0; +} + +static int +csio_slave_configure(struct scsi_device *sdev) +{ + if (sdev->tagged_supported) + scsi_activate_tcq(sdev, csio_lun_qdepth); + else + scsi_deactivate_tcq(sdev, csio_lun_qdepth); + + return 0; +} + +static void +csio_slave_destroy(struct scsi_device *sdev) +{ + sdev->hostdata = NULL; +} + +static int +csio_scan_finished(struct Scsi_Host *shost, unsigned long time) +{ + struct csio_lnode *ln = shost_priv(shost); + int rv = 1; + + spin_lock_irq(shost->host_lock); + if (!ln->hwp || csio_list_deleted(&ln->sm.sm_list)) + goto out; + + rv = csio_scan_done(ln, jiffies, time, csio_max_scan_tmo * HZ, + csio_delta_scan_tmo * HZ); +out: + spin_unlock_irq(shost->host_lock); + + return rv; +} + +struct scsi_host_template csio_fcoe_shost_template = { + .module = THIS_MODULE, + .name = CSIO_DRV_DESC, + .proc_name = KBUILD_MODNAME, + .queuecommand = csio_queuecommand, + .eh_abort_handler = csio_eh_abort_handler, + .eh_device_reset_handler = csio_eh_lun_reset_handler, + .slave_alloc = csio_slave_alloc, + .slave_configure = csio_slave_configure, + .slave_destroy = csio_slave_destroy, + .scan_finished = csio_scan_finished, + .this_id = -1, + .sg_tablesize = CSIO_SCSI_MAX_SGE, + .cmd_per_lun = CSIO_MAX_CMD_PER_LUN, + .use_clustering = ENABLE_CLUSTERING, + .shost_attrs = csio_fcoe_lport_attrs, + .max_sectors = CSIO_MAX_SECTOR_SIZE, +}; + +struct scsi_host_template csio_fcoe_shost_vport_template = { + .module = THIS_MODULE, + .name = CSIO_DRV_DESC, + .proc_name = KBUILD_MODNAME, + .queuecommand = csio_queuecommand, + .eh_abort_handler = csio_eh_abort_handler, + .eh_device_reset_handler = csio_eh_lun_reset_handler, + .slave_alloc = csio_slave_alloc, + .slave_configure = csio_slave_configure, + .slave_destroy = csio_slave_destroy, + .scan_finished = csio_scan_finished, + .this_id = -1, + .sg_tablesize = CSIO_SCSI_MAX_SGE, + .cmd_per_lun = CSIO_MAX_CMD_PER_LUN, + .use_clustering = ENABLE_CLUSTERING, + .shost_attrs = csio_fcoe_vport_attrs, + .max_sectors = CSIO_MAX_SECTOR_SIZE, +}; + +/* + * csio_scsi_alloc_ddp_bufs - Allocate buffers for DDP of unaligned SGLs. + * @scm: SCSI Module + * @hw: HW device. + * @buf_size: buffer size + * @num_buf : Number of buffers. + * + * This routine allocates DMA buffers required for SCSI Data xfer, if + * each SGL buffer for a SCSI Read request posted by SCSI midlayer are + * not virtually contiguous. + */ +static int +csio_scsi_alloc_ddp_bufs(struct csio_scsim *scm, struct csio_hw *hw, + int buf_size, int num_buf) +{ + int n = 0; + struct list_head *tmp; + struct csio_dma_buf *ddp_desc = NULL; + uint32_t unit_size = 0; + + if (!num_buf) + return 0; + + if (!buf_size) + return -EINVAL; + + INIT_LIST_HEAD(&scm->ddp_freelist); + + /* Align buf size to page size */ + buf_size = (buf_size + PAGE_SIZE - 1) & PAGE_MASK; + /* Initialize dma descriptors */ + for (n = 0; n < num_buf; n++) { + /* Set unit size to request size */ + unit_size = buf_size; + ddp_desc = kzalloc(sizeof(struct csio_dma_buf), GFP_KERNEL); + if (!ddp_desc) { + csio_err(hw, + "Failed to allocate ddp descriptors," + " Num allocated = %d.\n", + scm->stats.n_free_ddp); + goto no_mem; + } + + /* Allocate Dma buffers for DDP */ + ddp_desc->vaddr = pci_alloc_consistent(hw->pdev, unit_size, + &ddp_desc->paddr); + if (!ddp_desc->vaddr) { + csio_err(hw, + "SCSI response DMA buffer (ddp) allocation" + " failed!\n"); + kfree(ddp_desc); + goto no_mem; + } + + ddp_desc->len = unit_size; + + /* Added it to scsi ddp freelist */ + list_add_tail(&ddp_desc->list, &scm->ddp_freelist); + CSIO_INC_STATS(scm, n_free_ddp); + } + + return 0; +no_mem: + /* release dma descs back to freelist and free dma memory */ + list_for_each(tmp, &scm->ddp_freelist) { + ddp_desc = (struct csio_dma_buf *) tmp; + tmp = csio_list_prev(tmp); + pci_free_consistent(hw->pdev, ddp_desc->len, ddp_desc->vaddr, + ddp_desc->paddr); + list_del_init(&ddp_desc->list); + kfree(ddp_desc); + } + scm->stats.n_free_ddp = 0; + + return -ENOMEM; +} + +/* + * csio_scsi_free_ddp_bufs - free DDP buffers of unaligned SGLs. + * @scm: SCSI Module + * @hw: HW device. + * + * This routine frees ddp buffers. + */ +static void +csio_scsi_free_ddp_bufs(struct csio_scsim *scm, struct csio_hw *hw) +{ + struct list_head *tmp; + struct csio_dma_buf *ddp_desc; + + /* release dma descs back to freelist and free dma memory */ + list_for_each(tmp, &scm->ddp_freelist) { + ddp_desc = (struct csio_dma_buf *) tmp; + tmp = csio_list_prev(tmp); + pci_free_consistent(hw->pdev, ddp_desc->len, ddp_desc->vaddr, + ddp_desc->paddr); + list_del_init(&ddp_desc->list); + kfree(ddp_desc); + } + scm->stats.n_free_ddp = 0; +} + +/** + * csio_scsim_init - Initialize SCSI Module + * @scm: SCSI Module + * @hw: HW module + * + */ +int +csio_scsim_init(struct csio_scsim *scm, struct csio_hw *hw) +{ + int i; + struct csio_ioreq *ioreq; + struct csio_dma_buf *dma_buf; + + INIT_LIST_HEAD(&scm->active_q); + scm->hw = hw; + + scm->proto_cmd_len = sizeof(struct fcp_cmnd); + scm->proto_rsp_len = CSIO_SCSI_RSP_LEN; + scm->max_sge = CSIO_SCSI_MAX_SGE; + + spin_lock_init(&scm->freelist_lock); + + /* Pre-allocate ioreqs and initialize them */ + INIT_LIST_HEAD(&scm->ioreq_freelist); + for (i = 0; i < csio_scsi_ioreqs; i++) { + + ioreq = kzalloc(sizeof(struct csio_ioreq), GFP_KERNEL); + if (!ioreq) { + csio_err(hw, + "I/O request element allocation failed, " + " Num allocated = %d.\n", + scm->stats.n_free_ioreq); + + goto free_ioreq; + } + + /* Allocate Dma buffers for Response Payload */ + dma_buf = &ioreq->dma_buf; + dma_buf->vaddr = pci_pool_alloc(hw->scsi_pci_pool, GFP_KERNEL, + &dma_buf->paddr); + if (!dma_buf->vaddr) { + csio_err(hw, + "SCSI response DMA buffer allocation" + " failed!\n"); + kfree(ioreq); + goto free_ioreq; + } + + dma_buf->len = scm->proto_rsp_len; + + /* Set state to uninit */ + csio_init_state(&ioreq->sm, csio_scsis_uninit); + INIT_LIST_HEAD(&ioreq->gen_list); + init_completion(&ioreq->cmplobj); + + list_add_tail(&ioreq->sm.sm_list, &scm->ioreq_freelist); + CSIO_INC_STATS(scm, n_free_ioreq); + } + + if (csio_scsi_alloc_ddp_bufs(scm, hw, PAGE_SIZE, csio_ddp_descs)) + goto free_ioreq; + + return 0; + +free_ioreq: + /* + * Free up existing allocations, since an error + * from here means we are returning for good + */ + while (!list_empty(&scm->ioreq_freelist)) { + struct csio_sm *tmp; + + tmp = list_first_entry(&scm->ioreq_freelist, + struct csio_sm, sm_list); + list_del_init(&tmp->sm_list); + ioreq = (struct csio_ioreq *)tmp; + + dma_buf = &ioreq->dma_buf; + pci_pool_free(hw->scsi_pci_pool, dma_buf->vaddr, + dma_buf->paddr); + + kfree(ioreq); + } + + scm->stats.n_free_ioreq = 0; + + return -ENOMEM; +} + +/** + * csio_scsim_exit: Uninitialize SCSI Module + * @scm: SCSI Module + * + */ +void +csio_scsim_exit(struct csio_scsim *scm) +{ + struct csio_ioreq *ioreq; + struct csio_dma_buf *dma_buf; + + while (!list_empty(&scm->ioreq_freelist)) { + struct csio_sm *tmp; + + tmp = list_first_entry(&scm->ioreq_freelist, + struct csio_sm, sm_list); + list_del_init(&tmp->sm_list); + ioreq = (struct csio_ioreq *)tmp; + + dma_buf = &ioreq->dma_buf; + pci_pool_free(scm->hw->scsi_pci_pool, dma_buf->vaddr, + dma_buf->paddr); + + kfree(ioreq); + } + + scm->stats.n_free_ioreq = 0; + + csio_scsi_free_ddp_bufs(scm, scm->hw); +} |