diff options
Diffstat (limited to 'drivers/scsi/bfa/include/bfi/bfi_fcpim.h')
| -rw-r--r-- | drivers/scsi/bfa/include/bfi/bfi_fcpim.h | 301 |
1 files changed, 301 insertions, 0 deletions
diff --git a/drivers/scsi/bfa/include/bfi/bfi_fcpim.h b/drivers/scsi/bfa/include/bfi/bfi_fcpim.h new file mode 100644 index 0000000..52c059f --- /dev/null +++ b/drivers/scsi/bfa/include/bfi/bfi_fcpim.h @@ -0,0 +1,301 @@ +/* + * Copyright (c) 2005-2009 Brocade Communications Systems, Inc. + * All rights reserved + * www.brocade.com + * + * Linux driver for Brocade Fibre Channel Host Bus Adapter. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License (GPL) Version 2 as + * published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#ifndef __BFI_FCPIM_H__ +#define __BFI_FCPIM_H__ + +#include "bfi.h" +#include <protocol/fcp.h> + +#pragma pack(1) + +/* + * Initiator mode I-T nexus interface defines. + */ + +enum bfi_itnim_h2i { + BFI_ITNIM_H2I_CREATE_REQ = 1, /* i-t nexus creation */ + BFI_ITNIM_H2I_DELETE_REQ = 2, /* i-t nexus deletion */ +}; + +enum bfi_itnim_i2h { + BFI_ITNIM_I2H_CREATE_RSP = BFA_I2HM(1), + BFI_ITNIM_I2H_DELETE_RSP = BFA_I2HM(2), + BFI_ITNIM_I2H_SLER_EVENT = BFA_I2HM(3), +}; + +struct bfi_itnim_create_req_s { + struct bfi_mhdr_s mh; /* common msg header */ + u16 fw_handle; /* f/w handle for itnim */ + u8 class; /* FC class for IO */ + u8 seq_rec; /* sequence recovery support */ + u8 msg_no; /* seq id of the msg */ +}; + +struct bfi_itnim_create_rsp_s { + struct bfi_mhdr_s mh; /* common msg header */ + u16 bfa_handle; /* bfa handle for itnim */ + u8 status; /* fcp request status */ + u8 seq_id; /* seq id of the msg */ +}; + +struct bfi_itnim_delete_req_s { + struct bfi_mhdr_s mh; /* common msg header */ + u16 fw_handle; /* f/w itnim handle */ + u8 seq_id; /* seq id of the msg */ + u8 rsvd; +}; + +struct bfi_itnim_delete_rsp_s { + struct bfi_mhdr_s mh; /* common msg header */ + u16 bfa_handle; /* bfa handle for itnim */ + u8 status; /* fcp request status */ + u8 seq_id; /* seq id of the msg */ +}; + +struct bfi_itnim_sler_event_s { + struct bfi_mhdr_s mh; /* common msg header */ + u16 bfa_handle; /* bfa handle for itnim */ + u16 rsvd; +}; + +union bfi_itnim_h2i_msg_u { + struct bfi_itnim_create_req_s *create_req; + struct bfi_itnim_delete_req_s *delete_req; + struct bfi_msg_s *msg; +}; + +union bfi_itnim_i2h_msg_u { + struct bfi_itnim_create_rsp_s *create_rsp; + struct bfi_itnim_delete_rsp_s *delete_rsp; + struct bfi_itnim_sler_event_s *sler_event; + struct bfi_msg_s *msg; +}; + +/* + * Initiator mode IO interface defines. + */ + +enum bfi_ioim_h2i { + BFI_IOIM_H2I_IOABORT_REQ = 1, /* IO abort request */ + BFI_IOIM_H2I_IOCLEANUP_REQ = 2, /* IO cleanup request */ +}; + +enum bfi_ioim_i2h { + BFI_IOIM_I2H_IO_RSP = BFA_I2HM(1), /* non-fp IO response */ + BFI_IOIM_I2H_IOABORT_RSP = BFA_I2HM(2),/* ABORT rsp */ +}; + +/** + * IO command DIF info + */ +struct bfi_ioim_dif_s { + u32 dif_info[4]; +}; + +/** + * FCP IO messages overview + * + * @note + * - Max CDB length supported is 64 bytes. + * - SCSI Linked commands and SCSI bi-directional Commands not + * supported. + * + */ +struct bfi_ioim_req_s { + struct bfi_mhdr_s mh; /* Common msg header */ + u16 io_tag; /* I/O tag */ + u16 rport_hdl; /* itnim/rport firmware handle */ + struct fcp_cmnd_s cmnd; /* IO request info */ + + /** + * SG elements array within the IO request must be double word + * aligned. This aligment is required to optimize SGM setup for the IO. + */ + struct bfi_sge_s sges[BFI_SGE_INLINE_MAX]; + u8 io_timeout; + u8 dif_en; + u8 rsvd_a[2]; + struct bfi_ioim_dif_s dif; +}; + +/** + * This table shows various IO status codes from firmware and their + * meaning. Host driver can use these status codes to further process + * IO completions. + * + * BFI_IOIM_STS_OK : IO completed with error free SCSI & + * transport status. + * - io-tag can be reused. + * + * BFA_IOIM_STS_SCSI_ERR : IO completed with scsi error. + * - io-tag can be reused. + * + * BFI_IOIM_STS_HOST_ABORTED : IO was aborted successfully due to + * host request. + * - io-tag cannot be reused yet. + * + * BFI_IOIM_STS_ABORTED : IO was aborted successfully + * internally by f/w. + * - io-tag cannot be reused yet. + * + * BFI_IOIM_STS_TIMEDOUT : IO timedout and ABTS/RRQ is happening + * in the firmware and + * - io-tag cannot be reused yet. + * + * BFI_IOIM_STS_SQER_NEEDED : Firmware could not recover the IO + * with sequence level error + * logic and hence host needs to retry + * this IO with a different IO tag + * - io-tag cannot be used yet. + * + * BFI_IOIM_STS_NEXUS_ABORT : Second Level Error Recovery from host + * is required because 2 consecutive ABTS + * timedout and host needs logout and + * re-login with the target + * - io-tag cannot be used yet. + * + * BFI_IOIM_STS_UNDERRUN : IO completed with SCSI status good, + * but the data tranferred is less than + * the fcp data length in the command. + * ex. SCSI INQUIRY where transferred + * data length and residue count in FCP + * response accounts for total fcp-dl + * - io-tag can be reused. + * + * BFI_IOIM_STS_OVERRUN : IO completed with SCSI status good, + * but the data transerred is more than + * fcp data length in the command. ex. + * TAPE IOs where blocks can of unequal + * lengths. + * - io-tag can be reused. + * + * BFI_IOIM_STS_RES_FREE : Firmware has completed using io-tag + * during abort process + * - io-tag can be reused. + * + * BFI_IOIM_STS_PROTO_ERR : Firmware detected a protocol error. + * ex target sent more data than + * requested, or there was data frame + * loss and other reasons + * - io-tag cannot be used yet. + * + * BFI_IOIM_STS_DIF_ERR : Firwmare detected DIF error. ex: DIF + * CRC err or Ref Tag err or App tag err. + * - io-tag can be reused. + * + * BFA_IOIM_STS_TSK_MGT_ABORT : IO was aborted because of Task + * Management command from the host + * - io-tag can be reused. + * + * BFI_IOIM_STS_UTAG : Firmware does not know about this + * io_tag. + * - io-tag can be reused. + */ +enum bfi_ioim_status { + BFI_IOIM_STS_OK = 0, + BFI_IOIM_STS_HOST_ABORTED = 1, + BFI_IOIM_STS_ABORTED = 2, + BFI_IOIM_STS_TIMEDOUT = 3, + BFI_IOIM_STS_RES_FREE = 4, + BFI_IOIM_STS_SQER_NEEDED = 5, + BFI_IOIM_STS_PROTO_ERR = 6, + BFI_IOIM_STS_UTAG = 7, + BFI_IOIM_STS_PATHTOV = 8, +}; + +#define BFI_IOIM_SNSLEN (256) +/** + * I/O response message + */ +struct bfi_ioim_rsp_s { + struct bfi_mhdr_s mh; /* common msg header */ + u16 io_tag; /* completed IO tag */ + u16 bfa_rport_hndl; /* releated rport handle */ + u8 io_status; /* IO completion status */ + u8 reuse_io_tag; /* IO tag can be reused */ + u16 abort_tag; /* host abort request tag */ + u8 scsi_status; /* scsi status from target */ + u8 sns_len; /* scsi sense length */ + u8 resid_flags; /* IO residue flags */ + u8 rsvd_a; + u32 residue; /* IO residual length in bytes */ + u32 rsvd_b[3]; +}; + +struct bfi_ioim_abort_req_s { + struct bfi_mhdr_s mh; /* Common msg header */ + u16 io_tag; /* I/O tag */ + u16 abort_tag; /* unique request tag */ +}; + +/* + * Initiator mode task management command interface defines. + */ + +enum bfi_tskim_h2i { + BFI_TSKIM_H2I_TM_REQ = 1, /* task-mgmt command */ + BFI_TSKIM_H2I_ABORT_REQ = 2, /* task-mgmt command */ +}; + +enum bfi_tskim_i2h { + BFI_TSKIM_I2H_TM_RSP = BFA_I2HM(1), +}; + +struct bfi_tskim_req_s { + struct bfi_mhdr_s mh; /* Common msg header */ + u16 tsk_tag; /* task management tag */ + u16 itn_fhdl; /* itn firmware handle */ + lun_t lun; /* LU number */ + u8 tm_flags; /* see fcp_tm_cmnd_t */ + u8 t_secs; /* Timeout value in seconds */ + u8 rsvd[2]; +}; + +struct bfi_tskim_abortreq_s { + struct bfi_mhdr_s mh; /* Common msg header */ + u16 tsk_tag; /* task management tag */ + u16 rsvd; +}; + +enum bfi_tskim_status { + /* + * Following are FCP-4 spec defined status codes, + * **DO NOT CHANGE THEM ** + */ + BFI_TSKIM_STS_OK = 0, + BFI_TSKIM_STS_NOT_SUPP = 4, + BFI_TSKIM_STS_FAILED = 5, + + /** + * Defined by BFA + */ + BFI_TSKIM_STS_TIMEOUT = 10, /* TM request timedout */ + BFI_TSKIM_STS_ABORTED = 11, /* Aborted on host request */ +}; + +struct bfi_tskim_rsp_s { + struct bfi_mhdr_s mh; /* Common msg header */ + u16 tsk_tag; /* task mgmt cmnd tag */ + u8 tsk_status; /* @ref bfi_tskim_status */ + u8 rsvd; +}; + +#pragma pack() + +#endif /* __BFI_FCPIM_H__ */ + |
