1 files changed, 7 insertions, 17 deletions

diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index deec0ce..87e0c36 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -68,8 +68,8 @@ enum {
 	PIIX_COMB_PATA_P0	= (1 << 1),
 	PIIX_COMB		= (1 << 2), /* combined mode enabled? */
 
-	PIIX_PORT_PRESENT	= (1 << 0),
-	PIIX_PORT_ENABLED	= (1 << 4),
+	PIIX_PORT_ENABLED	= (1 << 0),
+	PIIX_PORT_PRESENT	= (1 << 4),
 
 	PIIX_80C_PRI		= (1 << 5) | (1 << 4),
 	PIIX_80C_SEC		= (1 << 7) | (1 << 6),
@@ -377,7 +377,9 @@ static void piix_pata_phy_reset(struct ata_port *ap)
  *	None (inherited from caller).
  *
  *	RETURNS:
- *	Non-zero if device detected, zero otherwise.
+ *	Non-zero if port is enabled, it may or may not have a device
+ *	attached in that case (PRESENT bit would only be set if BIOS probe
+ *	was done). Zero is returned if port is disabled.
  */
 static int piix_sata_probe (struct ata_port *ap)
 {
@@ -401,7 +403,7 @@ static int piix_sata_probe (struct ata_port *ap)
 	 */
 
 	for (i = 0; i < 4; i++) {
-		mask = (PIIX_PORT_PRESENT << i) | (PIIX_PORT_ENABLED << i);
+		mask = (PIIX_PORT_ENABLED << i);
 
 		if ((orig_mask & mask) == mask)
 			if (combined || (i == ap->hard_port_no))
@@ -566,18 +568,6 @@ static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 	}
 }
 
-/* move to PCI layer, integrate w/ MSI stuff */
-static void pci_enable_intx(struct pci_dev *pdev)
-{
-	u16 pci_command;
-
-	pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
-	if (pci_command & PCI_COMMAND_INTX_DISABLE) {
-		pci_command &= ~PCI_COMMAND_INTX_DISABLE;
-		pci_write_config_word(pdev, PCI_COMMAND, pci_command);
-	}
-}
-
 #define AHCI_PCI_BAR 5
 #define AHCI_GLOBAL_CTL 0x04
 #define AHCI_ENABLE (1 << 31)
@@ -675,7 +665,7 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	 * message-signalled interrupts currently).
 	 */
 	if (port_info[0]->host_flags & PIIX_FLAG_CHECKINTR)
-		pci_enable_intx(pdev);
+		pci_intx(pdev, 1);
 
 	if (combined) {
 		port_info[sata_chan] = &piix_port_info[ent->driver_data];