summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/aha1740.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/aha1740.h')
-rw-r--r--drivers/scsi/aha1740.h154
1 files changed, 154 insertions, 0 deletions
diff --git a/drivers/scsi/aha1740.h b/drivers/scsi/aha1740.h
new file mode 100644
index 0000000..af23fd6
--- /dev/null
+++ b/drivers/scsi/aha1740.h
@@ -0,0 +1,154 @@
+#ifndef _AHA1740_H
+
+/* $Id$
+ *
+ * Header file for the adaptec 1740 driver for Linux
+ *
+ * With minor revisions 3/31/93
+ * Written and (C) 1992,1993 Brad McLean. See aha1740.c
+ * for more info
+ *
+ */
+
+#include <linux/types.h>
+
+#define SLOTSIZE 0x5c
+
+/* EISA configuration registers & values */
+#define HID0(base) (base + 0x0)
+#define HID1(base) (base + 0x1)
+#define HID2(base) (base + 0x2)
+#define HID3(base) (base + 0x3)
+#define EBCNTRL(base) (base + 0x4)
+#define PORTADR(base) (base + 0x40)
+#define BIOSADR(base) (base + 0x41)
+#define INTDEF(base) (base + 0x42)
+#define SCSIDEF(base) (base + 0x43)
+#define BUSDEF(base) (base + 0x44)
+#define RESV0(base) (base + 0x45)
+#define RESV1(base) (base + 0x46)
+#define RESV2(base) (base + 0x47)
+
+#define HID_MFG "ADP"
+#define HID_PRD 0
+#define HID_REV 2
+#define EBCNTRL_VALUE 1
+#define PORTADDR_ENH 0x80
+/* READ */
+#define G2INTST(base) (base + 0x56)
+#define G2STAT(base) (base + 0x57)
+#define MBOXIN0(base) (base + 0x58)
+#define MBOXIN1(base) (base + 0x59)
+#define MBOXIN2(base) (base + 0x5a)
+#define MBOXIN3(base) (base + 0x5b)
+#define G2STAT2(base) (base + 0x5c)
+
+#define G2INTST_MASK 0xf0 /* isolate the status */
+#define G2INTST_CCBGOOD 0x10 /* CCB Completed */
+#define G2INTST_CCBRETRY 0x50 /* CCB Completed with a retry */
+#define G2INTST_HARDFAIL 0x70 /* Adapter Hardware Failure */
+#define G2INTST_CMDGOOD 0xa0 /* Immediate command success */
+#define G2INTST_CCBERROR 0xc0 /* CCB Completed with error */
+#define G2INTST_ASNEVENT 0xd0 /* Asynchronous Event Notification */
+#define G2INTST_CMDERROR 0xe0 /* Immediate command error */
+
+#define G2STAT_MBXOUT 4 /* Mailbox Out Empty Bit */
+#define G2STAT_INTPEND 2 /* Interrupt Pending Bit */
+#define G2STAT_BUSY 1 /* Busy Bit (attention pending) */
+
+#define G2STAT2_READY 0 /* Host Ready Bit */
+
+/* WRITE (and ReadBack) */
+#define MBOXOUT0(base) (base + 0x50)
+#define MBOXOUT1(base) (base + 0x51)
+#define MBOXOUT2(base) (base + 0x52)
+#define MBOXOUT3(base) (base + 0x53)
+#define ATTN(base) (base + 0x54)
+#define G2CNTRL(base) (base + 0x55)
+
+#define ATTN_IMMED 0x10 /* Immediate Command */
+#define ATTN_START 0x40 /* Start CCB */
+#define ATTN_ABORT 0x50 /* Abort CCB */
+
+#define G2CNTRL_HRST 0x80 /* Hard Reset */
+#define G2CNTRL_IRST 0x40 /* Clear EISA Interrupt */
+#define G2CNTRL_HRDY 0x20 /* Sets HOST ready */
+
+/* This is used with scatter-gather */
+struct aha1740_chain {
+ u32 dataptr; /* Location of data */
+ u32 datalen; /* Size of this part of chain */
+};
+
+/* These belong in scsi.h */
+#define any2scsi(up, p) \
+(up)[0] = (((unsigned long)(p)) >> 16) ; \
+(up)[1] = (((unsigned long)(p)) >> 8); \
+(up)[2] = ((unsigned long)(p));
+
+#define scsi2int(up) ( (((long)*(up)) << 16) + (((long)(up)[1]) << 8) + ((long)(up)[2]) )
+
+#define xany2scsi(up, p) \
+(up)[0] = ((long)(p)) >> 24; \
+(up)[1] = ((long)(p)) >> 16; \
+(up)[2] = ((long)(p)) >> 8; \
+(up)[3] = ((long)(p));
+
+#define xscsi2int(up) ( (((long)(up)[0]) << 24) + (((long)(up)[1]) << 16) \
+ + (((long)(up)[2]) << 8) + ((long)(up)[3]) )
+
+#define MAX_CDB 12
+#define MAX_SENSE 14
+#define MAX_STATUS 32
+
+struct ecb { /* Enhanced Control Block 6.1 */
+ u16 cmdw; /* Command Word */
+ /* Flag Word 1 */
+ u16 cne:1, /* Control Block Chaining */
+ :6, di:1, /* Disable Interrupt */
+ :2, ses:1, /* Suppress Underrun error */
+ :1, sg:1, /* Scatter/Gather */
+ :1, dsb:1, /* Disable Status Block */
+ ars:1; /* Automatic Request Sense */
+ /* Flag Word 2 */
+ u16 lun:3, /* Logical Unit */
+ tag:1, /* Tagged Queuing */
+ tt:2, /* Tag Type */
+ nd:1, /* No Disconnect */
+ :1, dat:1, /* Data transfer - check direction */
+ dir:1, /* Direction of transfer 1 = datain */
+ st:1, /* Suppress Transfer */
+ chk:1, /* Calculate Checksum */
+ :2, rec:1,:1; /* Error Recovery */
+ u16 nil0; /* nothing */
+ u32 dataptr; /* Data or Scatter List ptr */
+ u32 datalen; /* Data or Scatter List len */
+ u32 statusptr; /* Status Block ptr */
+ u32 linkptr; /* Chain Address */
+ u32 nil1; /* nothing */
+ u32 senseptr; /* Sense Info Pointer */
+ u8 senselen; /* Sense Length */
+ u8 cdblen; /* CDB Length */
+ u16 datacheck; /* Data checksum */
+ u8 cdb[MAX_CDB]; /* CDB area */
+/* Hardware defined portion ends here, rest is driver defined */
+ u8 sense[MAX_SENSE]; /* Sense area */
+ u8 status[MAX_STATUS]; /* Status area */
+ Scsi_Cmnd *SCpnt; /* Link to the SCSI Command Block */
+ void (*done) (Scsi_Cmnd *); /* Completion Function */
+};
+
+#define AHA1740CMD_NOP 0x00 /* No OP */
+#define AHA1740CMD_INIT 0x01 /* Initiator SCSI Command */
+#define AHA1740CMD_DIAG 0x05 /* Run Diagnostic Command */
+#define AHA1740CMD_SCSI 0x06 /* Initialize SCSI */
+#define AHA1740CMD_SENSE 0x08 /* Read Sense Information */
+#define AHA1740CMD_DOWN 0x09 /* Download Firmware (yeah, I bet!) */
+#define AHA1740CMD_RINQ 0x0a /* Read Host Adapter Inquiry Data */
+#define AHA1740CMD_TARG 0x10 /* Target SCSI Command */
+
+#define AHA1740_ECBS 32
+#define AHA1740_SCATTER 16
+#define AHA1740_CMDLUN 1
+
+#endif
OpenPOWER on IntegriCloud