summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/aha1542.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/aha1542.h')
-rw-r--r--drivers/scsi/aha1542.h151
1 files changed, 151 insertions, 0 deletions
diff --git a/drivers/scsi/aha1542.h b/drivers/scsi/aha1542.h
new file mode 100644
index 0000000..c402351
--- /dev/null
+++ b/drivers/scsi/aha1542.h
@@ -0,0 +1,151 @@
+#ifndef _AHA1542_H
+
+/* $Id: aha1542.h,v 1.1 1992/07/24 06:27:38 root Exp root $
+ *
+ * Header file for the adaptec 1542 driver for Linux
+ *
+ * $Log: aha1542.h,v $
+ * Revision 1.1 1992/07/24 06:27:38 root
+ * Initial revision
+ *
+ * Revision 1.2 1992/07/04 18:41:49 root
+ * Replaced distribution with current drivers
+ *
+ * Revision 1.3 1992/06/23 23:58:20 root
+ * Fixes.
+ *
+ * Revision 1.2 1992/05/26 22:13:23 root
+ * Changed bug that prevented DMA above first 2 mbytes.
+ *
+ * Revision 1.1 1992/05/22 21:00:29 root
+ * Initial revision
+ *
+ * Revision 1.1 1992/04/24 18:01:50 root
+ * Initial revision
+ *
+ * Revision 1.1 1992/04/02 03:23:13 drew
+ * Initial revision
+ *
+ * Revision 1.3 1992/01/27 14:46:29 tthorn
+ * *** empty log message ***
+ *
+ */
+
+#include <linux/types.h>
+
+/* I/O Port interface 4.2 */
+/* READ */
+#define STATUS(base) base
+#define STST 0x80 /* Self Test in Progress */
+#define DIAGF 0x40 /* Internal Diagnostic Failure */
+#define INIT 0x20 /* Mailbox Initialization Required */
+#define IDLE 0x10 /* SCSI Host Adapter Idle */
+#define CDF 0x08 /* Command/Data Out Port Full */
+#define DF 0x04 /* Data In Port Full */
+#define INVDCMD 0x01 /* Invalid H A Command */
+#define STATMASK 0xfd /* 0x02 is reserved */
+
+#define INTRFLAGS(base) (STATUS(base)+2)
+#define ANYINTR 0x80 /* Any Interrupt */
+#define SCRD 0x08 /* SCSI Reset Detected */
+#define HACC 0x04 /* HA Command Complete */
+#define MBOA 0x02 /* MBO Empty */
+#define MBIF 0x01 /* MBI Full */
+#define INTRMASK 0x8f
+
+/* WRITE */
+#define CONTROL(base) STATUS(base)
+#define HRST 0x80 /* Hard Reset */
+#define SRST 0x40 /* Soft Reset */
+#define IRST 0x20 /* Interrupt Reset */
+#define SCRST 0x10 /* SCSI Bus Reset */
+
+/* READ/WRITE */
+#define DATA(base) (STATUS(base)+1)
+#define CMD_NOP 0x00 /* No Operation */
+#define CMD_MBINIT 0x01 /* Mailbox Initialization */
+#define CMD_START_SCSI 0x02 /* Start SCSI Command */
+#define CMD_INQUIRY 0x04 /* Adapter Inquiry */
+#define CMD_EMBOI 0x05 /* Enable MailBox Out Interrupt */
+#define CMD_BUSON_TIME 0x07 /* Set Bus-On Time */
+#define CMD_BUSOFF_TIME 0x08 /* Set Bus-Off Time */
+#define CMD_DMASPEED 0x09 /* Set AT Bus Transfer Speed */
+#define CMD_RETDEVS 0x0a /* Return Installed Devices */
+#define CMD_RETCONF 0x0b /* Return Configuration Data */
+#define CMD_RETSETUP 0x0d /* Return Setup Data */
+#define CMD_ECHO 0x1f /* ECHO Command Data */
+
+#define CMD_EXTBIOS 0x28 /* Return extend bios information only 1542C */
+#define CMD_MBENABLE 0x29 /* Set Mailbox Interface enable only 1542C */
+
+/* Mailbox Definition 5.2.1 and 5.2.2 */
+struct mailbox {
+ unchar status; /* Command/Status */
+ unchar ccbptr[3]; /* msb, .., lsb */
+};
+
+/* This is used with scatter-gather */
+struct chain {
+ unchar datalen[3]; /* Size of this part of chain */
+ unchar dataptr[3]; /* Location of data */
+};
+
+/* These belong in scsi.h also */
+static inline void any2scsi(u8 *p, u32 v)
+{
+ p[0] = v >> 16;
+ p[1] = v >> 8;
+ p[2] = v;
+}
+
+#define scsi2int(up) ( (((long)*(up)) << 16) + (((long)(up)[1]) << 8) + ((long)(up)[2]) )
+
+#define xany2scsi(up, p) \
+(up)[0] = ((long)(p)) >> 24; \
+(up)[1] = ((long)(p)) >> 16; \
+(up)[2] = ((long)(p)) >> 8; \
+(up)[3] = ((long)(p));
+
+#define xscsi2int(up) ( (((long)(up)[0]) << 24) + (((long)(up)[1]) << 16) \
+ + (((long)(up)[2]) << 8) + ((long)(up)[3]) )
+
+#define MAX_CDB 12
+#define MAX_SENSE 14
+
+struct ccb { /* Command Control Block 5.3 */
+ unchar op; /* Command Control Block Operation Code */
+ unchar idlun; /* op=0,2:Target Id, op=1:Initiator Id */
+ /* Outbound data transfer, length is checked*/
+ /* Inbound data transfer, length is checked */
+ /* Logical Unit Number */
+ unchar cdblen; /* SCSI Command Length */
+ unchar rsalen; /* Request Sense Allocation Length/Disable */
+ unchar datalen[3]; /* Data Length (msb, .., lsb) */
+ unchar dataptr[3]; /* Data Pointer */
+ unchar linkptr[3]; /* Link Pointer */
+ unchar commlinkid; /* Command Linking Identifier */
+ unchar hastat; /* Host Adapter Status (HASTAT) */
+ unchar tarstat; /* Target Device Status */
+ unchar reserved[2];
+ unchar cdb[MAX_CDB+MAX_SENSE];/* SCSI Command Descriptor Block */
+ /* REQUEST SENSE */
+};
+
+static int aha1542_detect(Scsi_Host_Template *);
+static int aha1542_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int aha1542_abort(Scsi_Cmnd * SCpnt);
+static int aha1542_bus_reset(Scsi_Cmnd * SCpnt);
+static int aha1542_dev_reset(Scsi_Cmnd * SCpnt);
+static int aha1542_host_reset(Scsi_Cmnd * SCpnt);
+#if 0
+static int aha1542_old_abort(Scsi_Cmnd * SCpnt);
+static int aha1542_old_reset(Scsi_Cmnd *, unsigned int);
+#endif
+static int aha1542_biosparam(struct scsi_device *, struct block_device *,
+ sector_t, int *);
+
+#define AHA1542_MAILBOXES 8
+#define AHA1542_SCATTER 16
+#define AHA1542_CMDLUN 1
+
+#endif
OpenPOWER on IntegriCloud