diff options
Diffstat (limited to 'drivers/scsi/NCR53c406a.c')
| -rw-r--r-- | drivers/scsi/NCR53c406a.c | 1110 |
1 files changed, 1110 insertions, 0 deletions
diff --git a/drivers/scsi/NCR53c406a.c b/drivers/scsi/NCR53c406a.c new file mode 100644 index 0000000..c685d54 --- /dev/null +++ b/drivers/scsi/NCR53c406a.c @@ -0,0 +1,1110 @@ +/* + * NCR53c406.c + * Low-level SCSI driver for NCR53c406a chip. + * Copyright (C) 1994, 1995, 1996 Normunds Saumanis (normunds@fi.ibm.com) + * + * LILO command line usage: ncr53c406a=<PORTBASE>[,<IRQ>[,<FASTPIO>]] + * Specify IRQ = 0 for non-interrupt driven mode. + * FASTPIO = 1 for fast pio mode, 0 for slow mode. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + */ + +#define NCR53C406A_DEBUG 0 +#define VERBOSE_NCR53C406A_DEBUG 0 + +/* Set this to 1 for PIO mode (recommended) or to 0 for DMA mode */ +#define USE_PIO 1 + +#define USE_BIOS 0 + /* #define BIOS_ADDR 0xD8000 *//* define this if autoprobe fails */ + /* #define PORT_BASE 0x330 *//* define this if autoprobe fails */ + /* #define IRQ_LEV 0 *//* define this if autoprobe fails */ +#define DMA_CHAN 5 /* this is ignored if DMA is disabled */ + +/* Set this to 0 if you encounter kernel lockups while transferring + * data in PIO mode */ +#define USE_FAST_PIO 1 + +/* ============= End of user configurable parameters ============= */ + +#include <linux/module.h> + +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/stat.h> +#include <linux/init.h> +#include <linux/bitops.h> +#include <asm/io.h> +#include <asm/dma.h> +#include <asm/irq.h> + +#include <linux/blkdev.h> +#include <linux/spinlock.h> +#include "scsi.h" +#include <scsi/scsi_host.h> + +/* ============================================================= */ + +#define WATCHDOG 5000000 + +#define SYNC_MODE 0 /* Synchronous transfer mode */ + +#if DEBUG +#undef NCR53C406A_DEBUG +#define NCR53C406A_DEBUG 1 +#endif + +#if USE_PIO +#define USE_DMA 0 +#else +#define USE_DMA 1 +#endif + +/* Default configuration */ +#define C1_IMG 0x07 /* ID=7 */ +#define C2_IMG 0x48 /* FE SCSI2 */ +#if USE_DMA +#define C3_IMG 0x21 /* CDB TE */ +#else +#define C3_IMG 0x20 /* CDB */ +#endif +#define C4_IMG 0x04 /* ANE */ +#define C5_IMG 0xb6 /* AA PI SIE POL */ + +#define REG0 (outb(C4_IMG, CONFIG4)) +#define REG1 (outb(C5_IMG, CONFIG5)) + +#if NCR53C406A_DEBUG +#define DEB(x) x +#else +#define DEB(x) +#endif + +#if VERBOSE_NCR53C406A_DEBUG +#define VDEB(x) x +#else +#define VDEB(x) +#endif + +#define LOAD_DMA_COUNT(count) \ + outb(count & 0xff, TC_LSB); \ + outb((count >> 8) & 0xff, TC_MSB); \ + outb((count >> 16) & 0xff, TC_HIGH); + +/* Chip commands */ +#define DMA_OP 0x80 + +#define SCSI_NOP 0x00 +#define FLUSH_FIFO 0x01 +#define CHIP_RESET 0x02 +#define SCSI_RESET 0x03 +#define RESELECT 0x40 +#define SELECT_NO_ATN 0x41 +#define SELECT_ATN 0x42 +#define SELECT_ATN_STOP 0x43 +#define ENABLE_SEL 0x44 +#define DISABLE_SEL 0x45 +#define SELECT_ATN3 0x46 +#define RESELECT3 0x47 +#define TRANSFER_INFO 0x10 +#define INIT_CMD_COMPLETE 0x11 +#define MSG_ACCEPT 0x12 +#define TRANSFER_PAD 0x18 +#define SET_ATN 0x1a +#define RESET_ATN 0x1b +#define SEND_MSG 0x20 +#define SEND_STATUS 0x21 +#define SEND_DATA 0x22 +#define DISCONN_SEQ 0x23 +#define TERMINATE_SEQ 0x24 +#define TARG_CMD_COMPLETE 0x25 +#define DISCONN 0x27 +#define RECV_MSG 0x28 +#define RECV_CMD 0x29 +#define RECV_DATA 0x2a +#define RECV_CMD_SEQ 0x2b +#define TARGET_ABORT_DMA 0x04 + +/*----------------------------------------------------------------*/ +/* the following will set the monitor border color (useful to find + where something crashed or gets stuck at */ +/* 1 = blue + 2 = green + 3 = cyan + 4 = red + 5 = magenta + 6 = yellow + 7 = white +*/ + +#if NCR53C406A_DEBUG +#define rtrc(i) {inb(0x3da);outb(0x31,0x3c0);outb((i),0x3c0);} +#else +#define rtrc(i) {} +#endif +/*----------------------------------------------------------------*/ + +enum Phase { + idle, + data_out, + data_in, + command_ph, + status_ph, + message_out, + message_in +}; + +/* Static function prototypes */ +static void NCR53c406a_intr(int, void *, struct pt_regs *); +static irqreturn_t do_NCR53c406a_intr(int, void *, struct pt_regs *); +static void chip_init(void); +static void calc_port_addr(void); +#ifndef IRQ_LEV +static int irq_probe(void); +#endif + +/* ================================================================= */ + +#if USE_BIOS +static void *bios_base; +#endif + +#if PORT_BASE +static int port_base = PORT_BASE; +#else +static int port_base; +#endif + +#if IRQ_LEV +static int irq_level = IRQ_LEV; +#else +static int irq_level = -1; /* 0 is 'no irq', so use -1 for 'uninitialized' */ +#endif + +#if USE_DMA +static int dma_chan; +#endif + +#if USE_PIO +static int fast_pio = USE_FAST_PIO; +#endif + +static Scsi_Cmnd *current_SC; +static char info_msg[256]; + +/* ================================================================= */ + +/* possible BIOS locations */ +#if USE_BIOS +static void *addresses[] = { + (void *) 0xd8000, + (void *) 0xc8000 +}; +#define ADDRESS_COUNT (sizeof( addresses ) / sizeof( unsigned )) +#endif /* USE_BIOS */ + +/* possible i/o port addresses */ +static unsigned short ports[] = { 0x230, 0x330, 0x280, 0x290, 0x330, 0x340, 0x300, 0x310, 0x348, 0x350 }; +#define PORT_COUNT (sizeof( ports ) / sizeof( unsigned short )) + +/* possible interrupt channels */ +static unsigned short intrs[] = { 10, 11, 12, 15 }; +#define INTR_COUNT (sizeof( intrs ) / sizeof( unsigned short )) + +/* signatures for NCR 53c406a based controllers */ +#if USE_BIOS +struct signature { + char *signature; + int sig_offset; + int sig_length; +} signatures[] __initdata = { + /* 1 2 3 4 5 6 */ + /* 123456789012345678901234567890123456789012345678901234567890 */ + { +"Copyright (C) Acculogic, Inc.\r\n2.8M Diskette Extension Bios ver 4.04.03 03/01/1993", 61, 82},}; + +#define SIGNATURE_COUNT (sizeof( signatures ) / sizeof( struct signature )) +#endif /* USE_BIOS */ + +/* ============================================================ */ + +/* Control Register Set 0 */ +static int TC_LSB; /* transfer counter lsb */ +static int TC_MSB; /* transfer counter msb */ +static int SCSI_FIFO; /* scsi fifo register */ +static int CMD_REG; /* command register */ +static int STAT_REG; /* status register */ +static int DEST_ID; /* selection/reselection bus id */ +static int INT_REG; /* interrupt status register */ +static int SRTIMOUT; /* select/reselect timeout reg */ +static int SEQ_REG; /* sequence step register */ +static int SYNCPRD; /* synchronous transfer period */ +static int FIFO_FLAGS; /* indicates # of bytes in fifo */ +static int SYNCOFF; /* synchronous offset register */ +static int CONFIG1; /* configuration register */ +static int CLKCONV; /* clock conversion reg */ + /*static int TESTREG;*//* test mode register */ +static int CONFIG2; /* Configuration 2 Register */ +static int CONFIG3; /* Configuration 3 Register */ +static int CONFIG4; /* Configuration 4 Register */ +static int TC_HIGH; /* Transfer Counter High */ + /*static int FIFO_BOTTOM;*//* Reserve FIFO byte register */ + +/* Control Register Set 1 */ + /*static int JUMPER_SENSE;*//* Jumper sense port reg (r/w) */ + /*static int SRAM_PTR;*//* SRAM address pointer reg (r/w) */ + /*static int SRAM_DATA;*//* SRAM data register (r/w) */ +static int PIO_FIFO; /* PIO FIFO registers (r/w) */ + /*static int PIO_FIFO1;*//* */ + /*static int PIO_FIFO2;*//* */ + /*static int PIO_FIFO3;*//* */ +static int PIO_STATUS; /* PIO status (r/w) */ + /*static int ATA_CMD;*//* ATA command/status reg (r/w) */ + /*static int ATA_ERR;*//* ATA features/error register (r/w) */ +static int PIO_FLAG; /* PIO flag interrupt enable (r/w) */ +static int CONFIG5; /* Configuration 5 register (r/w) */ + /*static int SIGNATURE;*//* Signature Register (r) */ + /*static int CONFIG6;*//* Configuration 6 register (r) */ + +/* ============================================================== */ + +#if USE_DMA +static __inline__ int NCR53c406a_dma_setup(unsigned char *ptr, unsigned int count, unsigned char mode) +{ + unsigned limit; + unsigned long flags = 0; + + VDEB(printk("dma: before count=%d ", count)); + if (dma_chan <= 3) { + if (count > 65536) + count = 65536; + limit = 65536 - (((unsigned) ptr) & 0xFFFF); + } else { + if (count > (65536 << 1)) + count = (65536 << 1); + limit = (65536 << 1) - (((unsigned) ptr) & 0x1FFFF); + } + + if (count > limit) + count = limit; + + VDEB(printk("after count=%d\n", count)); + if ((count & 1) || (((unsigned) ptr) & 1)) + panic("NCR53c406a: attempted unaligned DMA transfer\n"); + + flags = claim_dma_lock(); + disable_dma(dma_chan); + clear_dma_ff(dma_chan); + set_dma_addr(dma_chan, (long) ptr); + set_dma_count(dma_chan, count); + set_dma_mode(dma_chan, mode); + enable_dma(dma_chan); + release_dma_lock(flags); + + return count; +} + +static __inline__ int NCR53c406a_dma_write(unsigned char *src, unsigned int count) +{ + return NCR53c406a_dma_setup(src, count, DMA_MODE_WRITE); +} + +static __inline__ int NCR53c406a_dma_read(unsigned char *src, unsigned int count) +{ + return NCR53c406a_dma_setup(src, count, DMA_MODE_READ); +} + +static __inline__ int NCR53c406a_dma_residual(void) +{ + register int tmp; + unsigned long flags; + + flags = claim_dma_lock(); + clear_dma_ff(dma_chan); + tmp = get_dma_residue(dma_chan); + release_dma_lock(flags); + + return tmp; +} +#endif /* USE_DMA */ + +#if USE_PIO +static __inline__ int NCR53c406a_pio_read(unsigned char *request, unsigned int reqlen) +{ + int i; + int len; /* current scsi fifo size */ + + REG1; + while (reqlen) { + i = inb(PIO_STATUS); + /* VDEB(printk("pio_status=%x\n", i)); */ + if (i & 0x80) + return 0; + + switch (i & 0x1e) { + default: + case 0x10: + len = 0; + break; + case 0x0: + len = 1; + break; + case 0x8: + len = 42; + break; + case 0xc: + len = 84; + break; + case 0xe: + len = 128; + break; + } + + if ((i & 0x40) && len == 0) { /* fifo empty and interrupt occurred */ + return 0; + } + + if (len) { + if (len > reqlen) + len = reqlen; + + if (fast_pio && len > 3) { + insl(PIO_FIFO, request, len >> 2); + request += len & 0xfc; + reqlen -= len & 0xfc; + } else { + while (len--) { + *request++ = inb(PIO_FIFO); + reqlen--; + } + } + } + } + return 0; +} + +static __inline__ int NCR53c406a_pio_write(unsigned char *request, unsigned int reqlen) +{ + int i = 0; + int len; /* current scsi fifo size */ + + REG1; + while (reqlen && !(i & 0x40)) { + i = inb(PIO_STATUS); + /* VDEB(printk("pio_status=%x\n", i)); */ + if (i & 0x80) /* error */ + return 0; + + switch (i & 0x1e) { + case 0x10: + len = 128; + break; + case 0x0: + len = 84; + break; + case 0x8: + len = 42; + break; + case 0xc: + len = 1; + break; + default: + case 0xe: + len = 0; + break; + } + + if (len) { + if (len > reqlen) + len = reqlen; + + if (fast_pio && len > 3) { + outsl(PIO_FIFO, request, len >> 2); + request += len & 0xfc; + reqlen -= len & 0xfc; + } else { + while (len--) { + outb(*request++, PIO_FIFO); + reqlen--; + } + } + } + } + return 0; +} +#endif /* USE_PIO */ + +static int __init NCR53c406a_detect(Scsi_Host_Template * tpnt) +{ + int present = 0; + struct Scsi_Host *shpnt = NULL; +#ifndef PORT_BASE + int i; +#endif + +#if USE_BIOS + int ii, jj; + bios_base = 0; + /* look for a valid signature */ + for (ii = 0; ii < ADDRESS_COUNT && !bios_base; ii++) + for (jj = 0; (jj < SIGNATURE_COUNT) && !bios_base; jj++) + if (!memcmp((void *) addresses[ii] + signatures[jj].sig_offset, (void *) signatures[jj].signature, (int) signatures[jj].sig_length)) + bios_base = addresses[ii]; + + if (!bios_base) { + printk("NCR53c406a: BIOS signature not found\n"); + return 0; + } + + DEB(printk("NCR53c406a BIOS found at 0x%x\n", (unsigned int) bios_base); + ); +#endif /* USE_BIOS */ + +#ifdef PORT_BASE + if (!request_region(port_base, 0x10, "NCR53c406a")) /* ports already snatched */ + port_base = 0; + +#else /* autodetect */ + if (port_base) { /* LILO override */ + if (!request_region(port_base, 0x10, "NCR53c406a")) + port_base = 0; + } else { + for (i = 0; i < PORT_COUNT && !port_base; i++) { + if (!request_region(ports[i], 0x10, "NCR53c406a")) { + DEB(printk("NCR53c406a: port 0x%x in use\n", ports[i])); + } else { + VDEB(printk("NCR53c406a: port 0x%x available\n", ports[i])); + outb(C5_IMG, ports[i] + 0x0d); /* reg set 1 */ + if ((inb(ports[i] + 0x0e) ^ inb(ports[i] + 0x0e)) == 7 && (inb(ports[i] + 0x0e) ^ inb(ports[i] + 0x0e)) == 7 && (inb(ports[i] + 0x0e) & 0xf8) == 0x58) { + port_base = ports[i]; + VDEB(printk("NCR53c406a: Sig register valid\n")); + VDEB(printk("port_base=0x%x\n", port_base)); + break; + } + release_region(ports[i], 0x10); + } + } + } +#endif /* PORT_BASE */ + + if (!port_base) { /* no ports found */ + printk("NCR53c406a: no available ports found\n"); + return 0; + } + + DEB(printk("NCR53c406a detected\n")); + + calc_port_addr(); + chip_init(); + +#ifndef IRQ_LEV + if (irq_level < 0) { /* LILO override if >= 0 */ + irq_level = irq_probe(); + if (irq_level < 0) { /* Trouble */ + printk("NCR53c406a: IRQ problem, irq_level=%d, giving up\n", irq_level); + goto err_release; + } + } +#endif + + DEB(printk("NCR53c406a: using port_base 0x%x\n", port_base)); + + present = 1; + tpnt->proc_name = "NCR53c406a"; + + shpnt = scsi_register(tpnt, 0); + if (!shpnt) { + printk("NCR53c406a: Unable to register host, giving up.\n"); + goto err_release; + } + + if (irq_level > 0) { + if (request_irq(irq_level, do_NCR53c406a_intr, 0, "NCR53c406a", shpnt)) { + printk("NCR53c406a: unable to allocate IRQ %d\n", irq_level); + goto err_free_scsi; + } + tpnt->can_queue = 1; + DEB(printk("NCR53c406a: allocated IRQ %d\n", irq_level)); + } else if (irq_level == 0) { + tpnt->can_queue = 0; + DEB(printk("NCR53c406a: No interrupts detected\n")); + printk("NCR53c406a driver no longer supports polling interface\n"); + printk("Please email linux-scsi@vger.kernel.org\n"); + +#if USE_DMA + printk("NCR53c406a: No interrupts found and DMA mode defined. Giving up.\n"); +#endif /* USE_DMA */ + goto err_free_scsi; + } else { + DEB(printk("NCR53c406a: Shouldn't get here!\n")); + goto err_free_scsi; + } + +#if USE_DMA + dma_chan = DMA_CHAN; + if (request_dma(dma_chan, "NCR53c406a") != 0) { + printk("NCR53c406a: unable to allocate DMA channel %d\n", dma_chan); + goto err_free_irq; + } + + DEB(printk("Allocated DMA channel %d\n", dma_chan)); +#endif /* USE_DMA */ + + shpnt->irq = irq_level; + shpnt->io_port = port_base; + shpnt->n_io_port = 0x10; +#if USE_DMA + shpnt->dma = dma_chan; +#endif + +#if USE_DMA + sprintf(info_msg, "NCR53c406a at 0x%x, IRQ %d, DMA channel %d.", port_base, irq_level, dma_chan); +#else + sprintf(info_msg, "NCR53c406a at 0x%x, IRQ %d, %s PIO mode.", port_base, irq_level, fast_pio ? "fast" : "slow"); +#endif + + return (present); + +#if USE_DMA + err_free_irq: + if (irq_level) + free_irq(irq_level, shpnt); +#endif + err_free_scsi: + scsi_unregister(shpnt); + err_release: + release_region(port_base, 0x10); + return 0; +} + +static int NCR53c406a_release(struct Scsi_Host *shost) +{ + if (shost->irq) + free_irq(shost->irq, NULL); +#ifdef USE_DMA + if (shost->dma_channel != 0xff) + free_dma(shost->dma_channel); +#endif + if (shost->io_port && shost->n_io_port) + release_region(shost->io_port, shost->n_io_port); + + scsi_unregister(shost); + return 0; +} + +/* called from init/main.c */ +static int __init NCR53c406a_setup(char *str) +{ + static size_t setup_idx = 0; + size_t i; + int ints[4]; + + DEB(printk("NCR53c406a: Setup called\n"); + ); + + if (setup_idx >= PORT_COUNT - 1) { + printk("NCR53c406a: Setup called too many times. Bad LILO params?\n"); + return 0; + } + get_options(str, 4, ints); + if (ints[0] < 1 || ints[0] > 3) { + printk("NCR53c406a: Malformed command line\n"); + printk("NCR53c406a: Usage: ncr53c406a=<PORTBASE>[,<IRQ>[,<FASTPIO>]]\n"); + return 0; + } + for (i = 0; i < PORT_COUNT && !port_base; i++) + if (ports[i] == ints[1]) { + port_base = ints[1]; + DEB(printk("NCR53c406a: Specified port_base 0x%x\n", port_base); + ) + } + if (!port_base) { + printk("NCR53c406a: Invalid PORTBASE 0x%x specified\n", ints[1]); + return 0; + } + + if (ints[0] > 1) { + if (ints[2] == 0) { + irq_level = 0; + DEB(printk("NCR53c406a: Specified irq %d\n", irq_level); + ) + } else + for (i = 0; i < INTR_COUNT && irq_level < 0; i++) + if (intrs[i] == ints[2]) { + irq_level = ints[2]; + DEB(printk("NCR53c406a: Specified irq %d\n", port_base); + ) + } + if (irq_level < 0) + printk("NCR53c406a: Invalid IRQ %d specified\n", ints[2]); + } + + if (ints[0] > 2) + fast_pio = ints[3]; + + DEB(printk("NCR53c406a: port_base=0x%x, irq=%d, fast_pio=%d\n", port_base, irq_level, fast_pio);) + return 1; +} + +__setup("ncr53c406a=", NCR53c406a_setup); + +static const char *NCR53c406a_info(struct Scsi_Host *SChost) +{ + DEB(printk("NCR53c406a_info called\n")); + return (info_msg); +} + +#if 0 +static void wait_intr(void) +{ + unsigned long i = jiffies + WATCHDOG; + + while (time_after(i, jiffies) && !(inb(STAT_REG) & 0xe0)) { /* wait for a pseudo-interrupt */ + cpu_relax(); + barrier(); + } + + if (time_before_eq(i, jiffies)) { /* Timed out */ + rtrc(0); + current_SC->result = DID_TIME_OUT << 16; + current_SC->SCp.phase = idle; + current_SC->scsi_done(current_SC); + return; + } + + NCR53c406a_intr(0, NULL, NULL); +} +#endif + +static int NCR53c406a_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *)) +{ + int i; + + VDEB(printk("NCR53c406a_queue called\n")); + DEB(printk("cmd=%02x, cmd_len=%02x, target=%02x, lun=%02x, bufflen=%d\n", SCpnt->cmnd[0], SCpnt->cmd_len, SCpnt->target, SCpnt->lun, SCpnt->request_bufflen)); + +#if 0 + VDEB(for (i = 0; i < SCpnt->cmd_len; i++) + printk("cmd[%d]=%02x ", i, SCpnt->cmnd[i])); + VDEB(printk("\n")); +#endif + + current_SC = SCpnt; + current_SC->scsi_done = done; + current_SC->SCp.phase = command_ph; + current_SC->SCp.Status = 0; + current_SC->SCp.Message = 0; + + /* We are locked here already by the mid layer */ + REG0; + outb(SCpnt->device->id, DEST_ID); /* set destination */ + outb(FLUSH_FIFO, CMD_REG); /* reset the fifos */ + + for (i = 0; i < SCpnt->cmd_len; i++) { + outb(SCpnt->cmnd[i], SCSI_FIFO); + } + outb(SELECT_NO_ATN, CMD_REG); + + rtrc(1); + return 0; +} + +static int NCR53c406a_abort(Scsi_Cmnd * SCpnt) +{ + DEB(printk("NCR53c406a_abort called\n")); + return FAILED; /* Don't know how to abort */ +} + +static int NCR53c406a_host_reset(Scsi_Cmnd * SCpnt) +{ + DEB(printk("NCR53c406a_reset called\n")); + outb(C4_IMG, CONFIG4); /* Select reg set 0 */ + outb(CHIP_RESET, CMD_REG); + outb(SCSI_NOP, CMD_REG); /* required after reset */ + outb(SCSI_RESET, CMD_REG); + chip_init(); + + rtrc(2); + return SUCCESS; +} + +static int NCR53c406a_device_reset(Scsi_Cmnd * SCpnt) +{ + return FAILED; +} + +static int NCR53c406a_bus_reset(Scsi_Cmnd * SCpnt) +{ + return FAILED; +} + +static int NCR53c406a_biosparm(struct scsi_device *disk, + struct block_device *dev, + sector_t capacity, int *info_array) +{ + int size; + + DEB(printk("NCR53c406a_biosparm called\n")); + + size = capacity; + info_array[0] = 64; /* heads */ + info_array[1] = 32; /* sectors */ + info_array[2] = size >> 11; /* cylinders */ + if (info_array[2] > 1024) { /* big disk */ + info_array[0] = 255; + info_array[1] = 63; + info_array[2] = size / (255 * 63); + } + return 0; +} + +static irqreturn_t do_NCR53c406a_intr(int unused, void *dev_id, + struct pt_regs *regs) +{ + unsigned long flags; + struct Scsi_Host *dev = dev_id; + + spin_lock_irqsave(dev->host_lock, flags); + NCR53c406a_intr(0, dev_id, regs); + spin_unlock_irqrestore(dev->host_lock, flags); + return IRQ_HANDLED; +} + +static void NCR53c406a_intr(int unused, void *dev_id, struct pt_regs *regs) +{ + DEB(unsigned char fifo_size; + ) + DEB(unsigned char seq_reg; + ) + unsigned char status, int_reg; +#if USE_PIO + unsigned char pio_status; + struct scatterlist *sglist; + unsigned int sgcount; +#endif + + VDEB(printk("NCR53c406a_intr called\n")); + +#if USE_PIO + REG1; + pio_status = inb(PIO_STATUS); +#endif + REG0; + status = inb(STAT_REG); + DEB(seq_reg = inb(SEQ_REG)); + int_reg = inb(INT_REG); + DEB(fifo_size = inb(FIFO_FLAGS) & 0x1f); + +#if NCR53C406A_DEBUG + printk("status=%02x, seq_reg=%02x, int_reg=%02x, fifo_size=%02x", status, seq_reg, int_reg, fifo_size); +#if (USE_DMA) + printk("\n"); +#else + printk(", pio=%02x\n", pio_status); +#endif /* USE_DMA */ +#endif /* NCR53C406A_DEBUG */ + + if (int_reg & 0x80) { /* SCSI reset intr */ + rtrc(3); + DEB(printk("NCR53c406a: reset intr received\n")); + current_SC->SCp.phase = idle; + current_SC->result = DID_RESET << 16; + current_SC->scsi_done(current_SC); + return; + } +#if USE_PIO + if (pio_status & 0x80) { + printk("NCR53C406A: Warning: PIO error!\n"); + current_SC->SCp.phase = idle; + current_SC->result = DID_ERROR << 16; + current_SC->scsi_done(current_SC); + return; + } +#endif /* USE_PIO */ + + if (status & 0x20) { /* Parity error */ + printk("NCR53c406a: Warning: parity error!\n"); + current_SC->SCp.phase = idle; + current_SC->result = DID_PARITY << 16; + current_SC->scsi_done(current_SC); + return; + } + + if (status & 0x40) { /* Gross error */ + printk("NCR53c406a: Warning: gross error!\n"); + current_SC->SCp.phase = idle; + current_SC->result = DID_ERROR << 16; + current_SC->scsi_done(current_SC); + return; + } + + if (int_reg & 0x20) { /* Disconnect */ + DEB(printk("NCR53c406a: disconnect intr received\n")); + if (current_SC->SCp.phase != message_in) { /* Unexpected disconnect */ + current_SC->result = DID_NO_CONNECT << 16; + } else { /* Command complete, return status and message */ + current_SC->result = (current_SC->SCp.Status & 0xff) + | ((current_SC->SCp.Message & 0xff) << 8) | (DID_OK << 16); + } + + rtrc(0); + current_SC->SCp.phase = idle; + current_SC->scsi_done(current_SC); + return; + } + + switch (status & 0x07) { /* scsi phase */ + case 0x00: /* DATA-OUT */ + if (int_reg & 0x10) { /* Target requesting info transfer */ + rtrc(5); + current_SC->SCp.phase = data_out; + VDEB(printk("NCR53c406a: Data-Out phase\n")); + outb(FLUSH_FIFO, CMD_REG); + LOAD_DMA_COUNT(current_SC->request_bufflen); /* Max transfer size */ +#if USE_DMA /* No s/g support for DMA */ + NCR53c406a_dma_write(current_SC->request_buffer, current_SC->request_bufflen); +#endif /* USE_DMA */ + outb(TRANSFER_INFO | DMA_OP, CMD_REG); +#if USE_PIO + if (!current_SC->use_sg) /* Don't use scatter-gather */ + NCR53c406a_pio_write(current_SC->request_buffer, current_SC->request_bufflen); + else { /* use scatter-gather */ + sgcount = current_SC->use_sg; + sglist = current_SC->request_buffer; + while (sgcount--) { + NCR53c406a_pio_write(page_address(sglist->page) + sglist->offset, sglist->length); + sglist++; + } + } + REG0; +#endif /* USE_PIO */ + } + break; + + case 0x01: /* DATA-IN */ + if (int_reg & 0x10) { /* Target requesting info transfer */ + rtrc(6); + current_SC->SCp.phase = data_in; + VDEB(printk("NCR53c406a: Data-In phase\n")); + outb(FLUSH_FIFO, CMD_REG); + LOAD_DMA_COUNT(current_SC->request_bufflen); /* Max transfer size */ +#if USE_DMA /* No s/g support for DMA */ + NCR53c406a_dma_read(current_SC->request_buffer, current_SC->request_bufflen); +#endif /* USE_DMA */ + outb(TRANSFER_INFO | DMA_OP, CMD_REG); +#if USE_PIO + if (!current_SC->use_sg) /* Don't use scatter-gather */ + NCR53c406a_pio_read(current_SC->request_buffer, current_SC->request_bufflen); + else { /* Use scatter-gather */ + sgcount = current_SC->use_sg; + sglist = current_SC->request_buffer; + while (sgcount--) { + NCR53c406a_pio_read(page_address(sglist->page) + sglist->offset, sglist->length); + sglist++; + } + } + REG0; +#endif /* USE_PIO */ + } + break; + + case 0x02: /* COMMAND */ + current_SC->SCp.phase = command_ph; + printk("NCR53c406a: Warning: Unknown interrupt occurred in command phase!\n"); + break; + + case 0x03: /* STATUS */ + rtrc(7); + current_SC->SCp.phase = status_ph; + VDEB(printk("NCR53c406a: Status phase\n")); + outb(FLUSH_FIFO, CMD_REG); + outb(INIT_CMD_COMPLETE, CMD_REG); + break; + + case 0x04: /* Reserved */ + case 0x05: /* Reserved */ + printk("NCR53c406a: WARNING: Reserved phase!!!\n"); + break; + + case 0x06: /* MESSAGE-OUT */ + DEB(printk("NCR53c406a: Message-Out phase\n")); + current_SC->SCp.phase = message_out; + outb(SET_ATN, CMD_REG); /* Reject the message */ + outb(MSG_ACCEPT, CMD_REG); + break; + + case 0x07: /* MESSAGE-IN */ + rtrc(4); + VDEB(printk("NCR53c406a: Message-In phase\n")); + current_SC->SCp.phase = message_in; + + current_SC->SCp.Status = inb(SCSI_FIFO); + current_SC->SCp.Message = inb(SCSI_FIFO); + + VDEB(printk("SCSI FIFO size=%d\n", inb(FIFO_FLAGS) & 0x1f)); + DEB(printk("Status = %02x Message = %02x\n", current_SC->SCp.Status, current_SC->SCp.Message)); + + if (current_SC->SCp.Message == SAVE_POINTERS || current_SC->SCp.Message == DISCONNECT) { + outb(SET_ATN, CMD_REG); /* Reject message */ + DEB(printk("Discarding SAVE_POINTERS message\n")); + } + outb(MSG_ACCEPT, CMD_REG); + break; + } +} + +#ifndef IRQ_LEV +static int irq_probe(void) +{ + int irqs, irq; + unsigned long i; + + inb(INT_REG); /* clear the interrupt register */ + irqs = probe_irq_on(); + + /* Invalid command will cause an interrupt */ + REG0; + outb(0xff, CMD_REG); + + /* Wait for the interrupt to occur */ + i = jiffies + WATCHDOG; + while (time_after(i, jiffies) && !(inb(STAT_REG) & 0x80)) + barrier(); + if (time_before_eq(i, jiffies)) { /* Timed out, must be hardware trouble */ + probe_irq_off(irqs); + return -1; + } + + irq = probe_irq_off(irqs); + + /* Kick the chip */ + outb(CHIP_RESET, CMD_REG); + outb(SCSI_NOP, CMD_REG); + chip_init(); + + return irq; +} +#endif /* IRQ_LEV */ + +static void chip_init(void) +{ + REG1; +#if USE_DMA + outb(0x00, PIO_STATUS); +#else /* USE_PIO */ + outb(0x01, PIO_STATUS); +#endif + outb(0x00, PIO_FLAG); + + outb(C4_IMG, CONFIG4); /* REG0; */ + outb(C3_IMG, CONFIG3); + outb(C2_IMG, CONFIG2); + outb(C1_IMG, CONFIG1); + + outb(0x05, CLKCONV); /* clock conversion factor */ + outb(0x9C, SRTIMOUT); /* Selection timeout */ + outb(0x05, SYNCPRD); /* Synchronous transfer period */ + outb(SYNC_MODE, SYNCOFF); /* synchronous mode */ +} + +static void __init calc_port_addr(void) +{ + /* Control Register Set 0 */ + TC_LSB = (port_base + 0x00); + TC_MSB = (port_base + 0x01); + SCSI_FIFO = (port_base + 0x02); + CMD_REG = (port_base + 0x03); + STAT_REG = (port_base + 0x04); + DEST_ID = (port_base + 0x04); + INT_REG = (port_base + 0x05); + SRTIMOUT = (port_base + 0x05); + SEQ_REG = (port_base + 0x06); + SYNCPRD = (port_base + 0x06); + FIFO_FLAGS = (port_base + 0x07); + SYNCOFF = (port_base + 0x07); + CONFIG1 = (port_base + 0x08); + CLKCONV = (port_base + 0x09); + /* TESTREG = (port_base+0x0A); */ + CONFIG2 = (port_base + 0x0B); + CONFIG3 = (port_base + 0x0C); + CONFIG4 = (port_base + 0x0D); + TC_HIGH = (port_base + 0x0E); + /* FIFO_BOTTOM = (port_base+0x0F); */ + + /* Control Register Set 1 */ + /* JUMPER_SENSE = (port_base+0x00); */ + /* SRAM_PTR = (port_base+0x01); */ + /* SRAM_DATA = (port_base+0x02); */ + PIO_FIFO = (port_base + 0x04); + /* PIO_FIFO1 = (port_base+0x05); */ + /* PIO_FIFO2 = (port_base+0x06); */ + /* PIO_FIFO3 = (port_base+0x07); */ + PIO_STATUS = (port_base + 0x08); + /* ATA_CMD = (port_base+0x09); */ + /* ATA_ERR = (port_base+0x0A); */ + PIO_FLAG = (port_base + 0x0B); + CONFIG5 = (port_base + 0x0D); + /* SIGNATURE = (port_base+0x0E); */ + /* CONFIG6 = (port_base+0x0F); */ +} + +MODULE_LICENSE("GPL"); + +/* NOTE: scatter-gather support only works in PIO mode. + * Use SG_NONE if DMA mode is enabled! + */ + +static Scsi_Host_Template driver_template = +{ + .proc_name = "NCR53c406a" /* proc_name */, + .name = "NCR53c406a" /* name */, + .detect = NCR53c406a_detect /* detect */, + .release = NCR53c406a_release, + .info = NCR53c406a_info /* info */, + .queuecommand = NCR53c406a_queue /* queuecommand */, + .eh_abort_handler = NCR53c406a_abort /* abort */, + .eh_bus_reset_handler = NCR53c406a_bus_reset /* reset */, + .eh_device_reset_handler = NCR53c406a_device_reset /* reset */, + .eh_host_reset_handler = NCR53c406a_host_reset /* reset */, + .bios_param = NCR53c406a_biosparm /* biosparm */, + .can_queue = 1 /* can_queue */, + .this_id = 7 /* SCSI ID of the chip */, + .sg_tablesize = 32 /*SG_ALL*/ /*SG_NONE*/, + .cmd_per_lun = 1 /* commands per lun */, + .unchecked_isa_dma = 1 /* unchecked_isa_dma */, + .use_clustering = ENABLE_CLUSTERING +}; + +#include "scsi_module.c" + +/* + * Overrides for Emacs so that we get a uniform tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-indent-level: 4 + * c-brace-imaginary-offset: 0 + * c-brace-offset: -4 + * c-argdecl-indent: 4 + * c-label-offset: -4 + * c-continued-statement-offset: 4 + * c-continued-brace-offset: 0 + * indent-tabs-mode: nil + * tab-width: 8 + * End: + */ |
