diff options
Diffstat (limited to 'drivers/scsi/3w-9xxx.c')
| -rw-r--r-- | drivers/scsi/3w-9xxx.c | 55 |
1 files changed, 47 insertions, 8 deletions
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index a6ac616..a748fbf 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -60,6 +60,7 @@ Remove un-needed eh_abort handler. Add support for embedded firmware error strings. 2.26.02.003 - Correctly handle single sgl's with use_sg=1. + 2.26.02.004 - Add support for 9550SX controllers. */ #include <linux/module.h> @@ -82,7 +83,7 @@ #include "3w-9xxx.h" /* Globals */ -#define TW_DRIVER_VERSION "2.26.02.003" +#define TW_DRIVER_VERSION "2.26.02.004" static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT]; static unsigned int twa_device_extension_count; static int twa_major = -1; @@ -892,11 +893,6 @@ static int twa_decode_bits(TW_Device_Extension *tw_dev, u32 status_reg_value) writel(TW_CONTROL_CLEAR_QUEUE_ERROR, TW_CONTROL_REG_ADDR(tw_dev)); } - if (status_reg_value & TW_STATUS_SBUF_WRITE_ERROR) { - TW_PRINTK(tw_dev->host, TW_DRIVER, 0xf, "SBUF Write Error: clearing"); - writel(TW_CONTROL_CLEAR_SBUF_WRITE_ERROR, TW_CONTROL_REG_ADDR(tw_dev)); - } - if (status_reg_value & TW_STATUS_MICROCONTROLLER_ERROR) { if (tw_dev->reset_print == 0) { TW_PRINTK(tw_dev->host, TW_DRIVER, 0x10, "Microcontroller Error: clearing"); @@ -930,6 +926,36 @@ out: return retval; } /* End twa_empty_response_queue() */ +/* This function will clear the pchip/response queue on 9550SX */ +static int twa_empty_response_queue_large(TW_Device_Extension *tw_dev) +{ + u32 status_reg_value, response_que_value; + int count = 0, retval = 1; + + if (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9550SX) { + status_reg_value = readl(TW_STATUS_REG_ADDR(tw_dev)); + + while (((status_reg_value & TW_STATUS_RESPONSE_QUEUE_EMPTY) == 0) && (count < TW_MAX_RESPONSE_DRAIN)) { + response_que_value = readl(TW_RESPONSE_QUEUE_REG_ADDR_LARGE(tw_dev)); + if ((response_que_value & TW_9550SX_DRAIN_COMPLETED) == TW_9550SX_DRAIN_COMPLETED) { + /* P-chip settle time */ + msleep(500); + retval = 0; + goto out; + } + status_reg_value = readl(TW_STATUS_REG_ADDR(tw_dev)); + count++; + } + if (count == TW_MAX_RESPONSE_DRAIN) + goto out; + + retval = 0; + } else + retval = 0; +out: + return retval; +} /* End twa_empty_response_queue_large() */ + /* This function passes sense keys from firmware to scsi layer */ static int twa_fill_sense(TW_Device_Extension *tw_dev, int request_id, int copy_sense, int print_host) { @@ -1613,8 +1639,16 @@ static int twa_reset_sequence(TW_Device_Extension *tw_dev, int soft_reset) int tries = 0, retval = 1, flashed = 0, do_soft_reset = soft_reset; while (tries < TW_MAX_RESET_TRIES) { - if (do_soft_reset) + if (do_soft_reset) { TW_SOFT_RESET(tw_dev); + /* Clear pchip/response queue on 9550SX */ + if (twa_empty_response_queue_large(tw_dev)) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x36, "Response queue (large) empty failed during reset sequence"); + do_soft_reset = 1; + tries++; + continue; + } + } /* Make sure controller is in a good state */ if (twa_poll_status(tw_dev, TW_STATUS_MICROCONTROLLER_READY | (do_soft_reset == 1 ? TW_STATUS_ATTENTION_INTERRUPT : 0), 60)) { @@ -2034,7 +2068,10 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id goto out_free_device_extension; } - mem_addr = pci_resource_start(pdev, 1); + if (pdev->device == PCI_DEVICE_ID_3WARE_9000) + mem_addr = pci_resource_start(pdev, 1); + else + mem_addr = pci_resource_start(pdev, 2); /* Save base address */ tw_dev->base_addr = ioremap(mem_addr, PAGE_SIZE); @@ -2148,6 +2185,8 @@ static void twa_remove(struct pci_dev *pdev) static struct pci_device_id twa_pci_tbl[] __devinitdata = { { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9550SX, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { } }; MODULE_DEVICE_TABLE(pci, twa_pci_tbl); |
