diff options
Diffstat (limited to 'drivers/rtc')
-rw-r--r-- | drivers/rtc/rtc-fm3130.c | 181 |
1 files changed, 130 insertions, 51 deletions
diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c index e4de8f3..4cf2e70 100644 --- a/drivers/rtc/rtc-fm3130.c +++ b/drivers/rtc/rtc-fm3130.c @@ -52,8 +52,8 @@ struct fm3130 { struct i2c_msg msg[4]; struct i2c_client *client; struct rtc_device *rtc; + int alarm_valid; int data_valid; - int alarm; }; static const struct i2c_device_id fm3130_id[] = { { "fm3130", 0 }, @@ -87,11 +87,7 @@ static void fm3130_rtc_mode(struct device *dev, int mode) dev_dbg(dev, "invalid mode %d\n", mode); break; } - /* Checking for alarm */ - if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) { - fm3130->alarm = 1; - fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF; - } + i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL]); } @@ -208,6 +204,17 @@ static int fm3130_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) struct fm3130 *fm3130 = dev_get_drvdata(dev); int tmp; struct rtc_time *tm = &alrm->time; + + if (!fm3130->alarm_valid) { + /* + * We have invalid alarm in RTC, probably due to battery faults + * or other problems. Return EIO for now, it will allow us to + * set alarm value later instead of error during probing which + * disables device + */ + return -EIO; + } + /* read the RTC alarm registers all at once */ tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent), &fm3130->msg[2], 2); @@ -222,20 +229,31 @@ static int fm3130_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) fm3130->regs[FM3130_ALARM_DATE], fm3130->regs[FM3130_ALARM_MONTHS]); - tm->tm_sec = bcd2bin(fm3130->regs[FM3130_ALARM_SECONDS] & 0x7F); tm->tm_min = bcd2bin(fm3130->regs[FM3130_ALARM_MINUTES] & 0x7F); tm->tm_hour = bcd2bin(fm3130->regs[FM3130_ALARM_HOURS] & 0x3F); tm->tm_mday = bcd2bin(fm3130->regs[FM3130_ALARM_DATE] & 0x3F); tm->tm_mon = bcd2bin(fm3130->regs[FM3130_ALARM_MONTHS] & 0x1F); + if (tm->tm_mon > 0) tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */ + dev_dbg(dev, "%s secs=%d, mins=%d, " "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", "read alarm", tm->tm_sec, tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + /* check if alarm enabled */ + fm3130->regs[FM3130_RTC_CONTROL] = + i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL); + + if ((fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AEN) && + (~fm3130->regs[FM3130_RTC_CONTROL] & + FM3130_RTC_CONTROL_BIT_CAL)) { + alrm->enabled = 1; + } + return 0; } @@ -251,25 +269,20 @@ static int fm3130_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); - if (tm->tm_sec != -1) - fm3130->regs[FM3130_ALARM_SECONDS] = - bin2bcd(tm->tm_sec) | 0x80; + fm3130->regs[FM3130_ALARM_SECONDS] = + (tm->tm_sec != -1) ? bin2bcd(tm->tm_sec) : 0x80; - if (tm->tm_min != -1) - fm3130->regs[FM3130_ALARM_MINUTES] = - bin2bcd(tm->tm_min) | 0x80; + fm3130->regs[FM3130_ALARM_MINUTES] = + (tm->tm_min != -1) ? bin2bcd(tm->tm_min) : 0x80; - if (tm->tm_hour != -1) - fm3130->regs[FM3130_ALARM_HOURS] = - bin2bcd(tm->tm_hour) | 0x80; + fm3130->regs[FM3130_ALARM_HOURS] = + (tm->tm_hour != -1) ? bin2bcd(tm->tm_hour) : 0x80; - if (tm->tm_mday != -1) - fm3130->regs[FM3130_ALARM_DATE] = - bin2bcd(tm->tm_mday) | 0x80; + fm3130->regs[FM3130_ALARM_DATE] = + (tm->tm_mday != -1) ? bin2bcd(tm->tm_mday) : 0x80; - if (tm->tm_mon != -1) - fm3130->regs[FM3130_ALARM_MONTHS] = - bin2bcd(tm->tm_mon + 1) | 0x80; + fm3130->regs[FM3130_ALARM_MONTHS] = + (tm->tm_mon != -1) ? bin2bcd(tm->tm_mon + 1) : 0x80; dev_dbg(dev, "alarm write %02x %02x %02x %02x %02x\n", fm3130->regs[FM3130_ALARM_SECONDS], @@ -285,11 +298,8 @@ static int fm3130_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) } fm3130->regs[FM3130_RTC_CONTROL] = i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL); - /* Checking for alarm */ - if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) { - fm3130->alarm = 1; - fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF; - } + + /* enable or disable alarm */ if (alrm->enabled) { i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL, (fm3130->regs[FM3130_RTC_CONTROL] & @@ -298,16 +308,55 @@ static int fm3130_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) } else { i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL] & - ~(FM3130_RTC_CONTROL_BIT_AEN)); + ~(FM3130_RTC_CONTROL_BIT_CAL) & + ~(FM3130_RTC_CONTROL_BIT_AEN)); } + + /* We assume here that data is valid once written */ + if (!fm3130->alarm_valid) + fm3130->alarm_valid = 1; + return 0; } +static int fm3130_alarm_irq_enable(struct device *dev, unsigned int enabled) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + int ret = 0; + + fm3130->regs[FM3130_RTC_CONTROL] = + i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL); + + dev_dbg(dev, "alarm_irq_enable: enable=%d, FM3130_RTC_CONTROL=%02x\n", + enabled, fm3130->regs[FM3130_RTC_CONTROL]); + + switch (enabled) { + case 0: /* alarm off */ + ret = i2c_smbus_write_byte_data(fm3130->client, + FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_CAL) & + ~(FM3130_RTC_CONTROL_BIT_AEN)); + break; + case 1: /* alarm on */ + ret = i2c_smbus_write_byte_data(fm3130->client, + FM3130_RTC_CONTROL, (fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_CAL)) | + FM3130_RTC_CONTROL_BIT_AEN); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + static const struct rtc_class_ops fm3130_rtc_ops = { .read_time = fm3130_get_time, .set_time = fm3130_set_time, .read_alarm = fm3130_read_alarm, .set_alarm = fm3130_set_alarm, + .alarm_irq_enable = fm3130_alarm_irq_enable, }; static struct i2c_driver fm3130_driver; @@ -356,6 +405,7 @@ static int __devinit fm3130_probe(struct i2c_client *client, fm3130->msg[3].len = FM3130_ALARM_REGS; fm3130->msg[3].buf = &fm3130->regs[FM3130_ALARM_SECONDS]; + fm3130->alarm_valid = 0; fm3130->data_valid = 0; tmp = i2c_transfer(adapter, fm3130->msg, 4); @@ -370,12 +420,6 @@ static int __devinit fm3130_probe(struct i2c_client *client, fm3130->regs[FM3130_CAL_CONTROL] = i2c_smbus_read_byte_data(client, FM3130_CAL_CONTROL); - /* Checking for alarm */ - if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) { - fm3130->alarm = 1; - fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF; - } - /* Disabling calibration mode */ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL) { i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, @@ -400,44 +444,79 @@ static int __devinit fm3130_probe(struct i2c_client *client, fm3130->regs[FM3130_CAL_CONTROL] & ~(FM3130_CAL_CONTROL_BIT_nOSCEN)); - /* oscillator fault? clear flag, and warn */ - if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_LB) + /* low battery? clear flag, and warn */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_LB) { + i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_LB)); dev_warn(&client->dev, "Low battery!\n"); + } - /* oscillator fault? clear flag, and warn */ + /* check if Power On Reset bit is set */ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_POR) { i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL] & ~FM3130_RTC_CONTROL_BIT_POR); - dev_warn(&client->dev, "SET TIME!\n"); + dev_dbg(&client->dev, "POR bit is set\n"); } /* ACS is controlled by alarm */ i2c_smbus_write_byte_data(client, FM3130_ALARM_WP_CONTROL, 0x80); - /* TODO */ - /* TODO need to sanity check alarm */ - tmp = fm3130->regs[FM3130_RTC_SECONDS]; - tmp = bcd2bin(tmp & 0x7f); - if (tmp > 60) - goto exit_bad; + /* alarm registers sanity check */ + tmp = bcd2bin(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f); + if (tmp > 59) + goto bad_alarm; + tmp = bcd2bin(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f); - if (tmp > 60) - goto exit_bad; + if (tmp > 59) + goto bad_alarm; + + tmp = bcd2bin(fm3130->regs[FM3130_RTC_HOURS] & 0x3f); + if (tmp > 23) + goto bad_alarm; tmp = bcd2bin(fm3130->regs[FM3130_RTC_DATE] & 0x3f); if (tmp == 0 || tmp > 31) - goto exit_bad; + goto bad_alarm; tmp = bcd2bin(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f); if (tmp == 0 || tmp > 12) - goto exit_bad; + goto bad_alarm; - tmp = fm3130->regs[FM3130_RTC_HOURS]; + fm3130->alarm_valid = 1; + +bad_alarm: + + /* clock registers sanity chek */ + tmp = bcd2bin(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f); + if (tmp > 59) + goto bad_clock; + + tmp = bcd2bin(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f); + if (tmp > 59) + goto bad_clock; + + tmp = bcd2bin(fm3130->regs[FM3130_RTC_HOURS] & 0x3f); + if (tmp > 23) + goto bad_clock; + + tmp = bcd2bin(fm3130->regs[FM3130_RTC_DAY] & 0x7); + if (tmp == 0 || tmp > 7) + goto bad_clock; + + tmp = bcd2bin(fm3130->regs[FM3130_RTC_DATE] & 0x3f); + if (tmp == 0 || tmp > 31) + goto bad_clock; + + tmp = bcd2bin(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f); + if (tmp == 0 || tmp > 12) + goto bad_clock; fm3130->data_valid = 1; -exit_bad: - if (!fm3130->data_valid) +bad_clock: + + if (!fm3130->data_valid || !fm3130->alarm_valid) dev_dbg(&client->dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x" "%02x %02x %02x %02x %02x %02x %02x\n", |