summaryrefslogtreecommitdiffstats
path: root/drivers/rtc/rtc-bfin.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/rtc/rtc-bfin.c')
-rw-r--r--drivers/rtc/rtc-bfin.c30
1 files changed, 15 insertions, 15 deletions
diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c
index aafd3e6..a118eb0 100644
--- a/drivers/rtc/rtc-bfin.c
+++ b/drivers/rtc/rtc-bfin.c
@@ -1,8 +1,8 @@
/*
* Blackfin On-Chip Real Time Clock Driver
- * Supports BF52[257]/BF53[123]/BF53[467]/BF54[24789]
+ * Supports BF51x/BF52x/BF53[123]/BF53[467]/BF54x
*
- * Copyright 2004-2008 Analog Devices Inc.
+ * Copyright 2004-2009 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
*
@@ -363,7 +363,7 @@ static int __devinit bfin_rtc_probe(struct platform_device *pdev)
struct bfin_rtc *rtc;
struct device *dev = &pdev->dev;
int ret = 0;
- unsigned long timeout;
+ unsigned long timeout = jiffies + HZ;
dev_dbg_stamp(dev);
@@ -374,32 +374,32 @@ static int __devinit bfin_rtc_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, rtc);
device_init_wakeup(dev, 1);
+ /* Register our RTC with the RTC framework */
+ rtc->rtc_dev = rtc_device_register(pdev->name, dev, &bfin_rtc_ops,
+ THIS_MODULE);
+ if (unlikely(IS_ERR(rtc->rtc_dev))) {
+ ret = PTR_ERR(rtc->rtc_dev);
+ goto err;
+ }
+
/* Grab the IRQ and init the hardware */
ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_SHARED, pdev->name, dev);
if (unlikely(ret))
- goto err;
+ goto err_reg;
/* sometimes the bootloader touched things, but the write complete was not
* enabled, so let's just do a quick timeout here since the IRQ will not fire ...
*/
- timeout = jiffies + HZ;
while (bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING)
if (time_after(jiffies, timeout))
break;
bfin_rtc_reset(dev, RTC_ISTAT_WRITE_COMPLETE);
bfin_write_RTC_SWCNT(0);
- /* Register our RTC with the RTC framework */
- rtc->rtc_dev = rtc_device_register(pdev->name, dev, &bfin_rtc_ops, THIS_MODULE);
- if (unlikely(IS_ERR(rtc->rtc_dev))) {
- ret = PTR_ERR(rtc->rtc_dev);
- goto err_irq;
- }
-
return 0;
- err_irq:
- free_irq(IRQ_RTC, dev);
- err:
+err_reg:
+ rtc_device_unregister(rtc->rtc_dev);
+err:
kfree(rtc);
return ret;
}
OpenPOWER on IntegriCloud