diff options
Diffstat (limited to 'drivers/rtc/Kconfig')
| -rw-r--r-- | drivers/rtc/Kconfig | 45 |
1 files changed, 41 insertions, 4 deletions
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 484de8e..6402d69 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -469,10 +469,47 @@ config RTC_DRV_AT32AP700X AT32AP700x family processors. config RTC_DRV_AT91RM9200 - tristate "AT91RM9200" - depends on ARCH_AT91RM9200 - help - Driver for the Atmel AT91RM9200's internal RTC (Realtime Clock). + tristate "AT91RM9200 or AT91SAM9RL" + depends on ARCH_AT91RM9200 || ARCH_AT91SAM9RL + help + Driver for the internal RTC (Realtime Clock) module found on + Atmel AT91RM9200's and AT91SAM9RL chips. On SAM9RL chips + this is powered by the backup power supply. + +config RTC_DRV_AT91SAM9 + tristate "AT91SAM9x" + depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40) + help + RTC driver for the Atmel AT91SAM9x internal RTT (Real Time Timer). + These timers are powered by the backup power supply (such as a + small coin cell battery), but do not need to be used as RTCs. + + (On AT91SAM9rl chips you probably want to use the dedicated RTC + module and leave the RTT available for other uses.) + +config RTC_DRV_AT91SAM9_RTT + int + range 0 1 + default 0 + prompt "RTT module Number" if ARCH_AT91SAM9263 + depends on RTC_DRV_AT91SAM9 + help + More than one RTT module is available. You can choose which + one will be used as an RTC. The default of zero is normally + OK to use, though some systems use that for non-RTC purposes. + +config RTC_DRV_AT91SAM9_GPBR + int + range 0 3 if !ARCH_AT91SAM9263 + range 0 15 if ARCH_AT91SAM9263 + default 0 + prompt "Backup Register Number" + depends on RTC_DRV_AT91SAM9 + help + The RTC driver needs to use one of the General Purpose Backup + Registers (GPBRs) as well as the RTT. You can choose which one + will be used. The default of zero is normally OK to use, but + on some systems other software needs to use that register. config RTC_DRV_BFIN tristate "Blackfin On-Chip RTC" |
