diff options
Diffstat (limited to 'drivers/regulator')
-rw-r--r-- | drivers/regulator/Kconfig | 15 | ||||
-rw-r--r-- | drivers/regulator/Makefile | 2 | ||||
-rw-r--r-- | drivers/regulator/arizona-ldo1.c | 58 | ||||
-rw-r--r-- | drivers/regulator/arizona-micsupp.c | 38 | ||||
-rw-r--r-- | drivers/regulator/axp20x-regulator.c | 286 | ||||
-rw-r--r-- | drivers/regulator/bcm590xx-regulator.c | 92 | ||||
-rw-r--r-- | drivers/regulator/core.c | 58 | ||||
-rw-r--r-- | drivers/regulator/devres.c | 6 | ||||
-rw-r--r-- | drivers/regulator/fixed.c | 13 | ||||
-rw-r--r-- | drivers/regulator/ltc3589.c | 554 | ||||
-rw-r--r-- | drivers/regulator/max8649.c | 4 | ||||
-rw-r--r-- | drivers/regulator/of_regulator.c | 68 | ||||
-rw-r--r-- | drivers/regulator/pbias-regulator.c | 76 | ||||
-rw-r--r-- | drivers/regulator/s2mpa01.c | 1 |
14 files changed, 1143 insertions, 128 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 903eb37..c2fa0b4 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -139,6 +139,13 @@ config REGULATOR_AS3722 AS3722 PMIC. This will enable support for all the software controllable DCDC/LDO regulators. +config REGULATOR_AXP20X + tristate "X-POWERS AXP20X PMIC Regulators" + depends on MFD_AXP20X + help + This driver provides support for the voltage regulators on the + AXP20X PMIC. + config REGULATOR_BCM590XX tristate "Broadcom BCM590xx PMU Regulators" depends on MFD_BCM590XX @@ -265,6 +272,14 @@ config REGULATOR_LP8788 help This driver supports LP8788 voltage regulator chip. +config REGULATOR_LTC3589 + tristate "LTC3589 8-output voltage regulator" + depends on I2C + select REGMAP_I2C + help + This enables support for the LTC3589, LTC3589-1, and LTC3589-2 + 8-output regulators controlled via I2C. + config REGULATOR_MAX14577 tristate "Maxim 14577 regulator" depends on MFD_MAX14577 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 12ef277..d461110 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o +obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o @@ -37,6 +38,7 @@ obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o +obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o obj-$(CONFIG_REGULATOR_MAX14577) += max14577.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c index b1033d3..04f262a 100644 --- a/drivers/regulator/arizona-ldo1.c +++ b/drivers/regulator/arizona-ldo1.c @@ -16,9 +16,11 @@ #include <linux/init.h> #include <linux/bitops.h> #include <linux/err.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> #include <linux/gpio.h> #include <linux/slab.h> @@ -178,6 +180,42 @@ static const struct regulator_init_data arizona_ldo1_default = { .num_consumer_supplies = 1, }; +static int arizona_ldo1_of_get_pdata(struct arizona *arizona, + struct regulator_config *config) +{ + struct arizona_pdata *pdata = &arizona->pdata; + struct arizona_ldo1 *ldo1 = config->driver_data; + struct device_node *init_node, *dcvdd_node; + struct regulator_init_data *init_data; + + pdata->ldoena = arizona_of_get_named_gpio(arizona, "wlf,ldoena", true); + + init_node = of_get_child_by_name(arizona->dev->of_node, "ldo1"); + dcvdd_node = of_parse_phandle(arizona->dev->of_node, "DCVDD-supply", 0); + + if (init_node) { + config->of_node = init_node; + + init_data = of_get_regulator_init_data(arizona->dev, init_node); + + if (init_data) { + init_data->consumer_supplies = &ldo1->supply; + init_data->num_consumer_supplies = 1; + + if (dcvdd_node && dcvdd_node != init_node) + arizona->external_dcvdd = true; + + pdata->ldo1 = init_data; + } + } else if (dcvdd_node) { + arizona->external_dcvdd = true; + } + + of_node_put(dcvdd_node); + + return 0; +} + static int arizona_ldo1_probe(struct platform_device *pdev) { struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); @@ -186,6 +224,8 @@ static int arizona_ldo1_probe(struct platform_device *pdev) struct arizona_ldo1 *ldo1; int ret; + arizona->external_dcvdd = false; + ldo1 = devm_kzalloc(&pdev->dev, sizeof(*ldo1), GFP_KERNEL); if (!ldo1) return -ENOMEM; @@ -216,6 +256,15 @@ static int arizona_ldo1_probe(struct platform_device *pdev) config.dev = arizona->dev; config.driver_data = ldo1; config.regmap = arizona->regmap; + + if (IS_ENABLED(CONFIG_OF)) { + if (!dev_get_platdata(arizona->dev)) { + ret = arizona_ldo1_of_get_pdata(arizona, &config); + if (ret < 0) + return ret; + } + } + config.ena_gpio = arizona->pdata.ldoena; if (arizona->pdata.ldo1) @@ -223,6 +272,13 @@ static int arizona_ldo1_probe(struct platform_device *pdev) else config.init_data = &ldo1->init_data; + /* + * LDO1 can only be used to supply DCVDD so if it has no + * consumers then DCVDD is supplied externally. + */ + if (config.init_data->num_consumer_supplies == 0) + arizona->external_dcvdd = true; + ldo1->regulator = devm_regulator_register(&pdev->dev, desc, &config); if (IS_ERR(ldo1->regulator)) { ret = PTR_ERR(ldo1->regulator); @@ -231,6 +287,8 @@ static int arizona_ldo1_probe(struct platform_device *pdev) return ret; } + of_node_put(config.of_node); + platform_set_drvdata(pdev, ldo1); return 0; diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c index 6fdd9bf..ce9aca5 100644 --- a/drivers/regulator/arizona-micsupp.c +++ b/drivers/regulator/arizona-micsupp.c @@ -16,9 +16,11 @@ #include <linux/init.h> #include <linux/bitops.h> #include <linux/err.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> #include <linux/gpio.h> #include <linux/slab.h> #include <linux/workqueue.h> @@ -195,6 +197,32 @@ static const struct regulator_init_data arizona_micsupp_ext_default = { .num_consumer_supplies = 1, }; +static int arizona_micsupp_of_get_pdata(struct arizona *arizona, + struct regulator_config *config) +{ + struct arizona_pdata *pdata = &arizona->pdata; + struct arizona_micsupp *micsupp = config->driver_data; + struct device_node *np; + struct regulator_init_data *init_data; + + np = of_get_child_by_name(arizona->dev->of_node, "micvdd"); + + if (np) { + config->of_node = np; + + init_data = of_get_regulator_init_data(arizona->dev, np); + + if (init_data) { + init_data->consumer_supplies = &micsupp->supply; + init_data->num_consumer_supplies = 1; + + pdata->micvdd = init_data; + } + } + + return 0; +} + static int arizona_micsupp_probe(struct platform_device *pdev) { struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); @@ -234,6 +262,14 @@ static int arizona_micsupp_probe(struct platform_device *pdev) config.driver_data = micsupp; config.regmap = arizona->regmap; + if (IS_ENABLED(CONFIG_OF)) { + if (!dev_get_platdata(arizona->dev)) { + ret = arizona_micsupp_of_get_pdata(arizona, &config); + if (ret < 0) + return ret; + } + } + if (arizona->pdata.micvdd) config.init_data = arizona->pdata.micvdd; else @@ -253,6 +289,8 @@ static int arizona_micsupp_probe(struct platform_device *pdev) return ret; } + of_node_put(config.of_node); + platform_set_drvdata(pdev, micsupp); return 0; diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c new file mode 100644 index 0000000..004aadb --- /dev/null +++ b/drivers/regulator/axp20x-regulator.c @@ -0,0 +1,286 @@ +/* + * AXP20x regulators driver. + * + * Copyright (C) 2013 Carlo Caione <carlo@caione.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/mfd/axp20x.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/of_regulator.h> + +#define AXP20X_IO_ENABLED 0x03 +#define AXP20X_IO_DISABLED 0x07 + +#define AXP20X_WORKMODE_DCDC2_MASK BIT(2) +#define AXP20X_WORKMODE_DCDC3_MASK BIT(1) + +#define AXP20X_FREQ_DCDC_MASK 0x0f + +#define AXP20X_DESC_IO(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg, \ + _emask, _enable_val, _disable_val) \ + [AXP20X_##_id] = { \ + .name = #_id, \ + .supply_name = (_supply), \ + .type = REGULATOR_VOLTAGE, \ + .id = AXP20X_##_id, \ + .n_voltages = (((_max) - (_min)) / (_step) + 1), \ + .owner = THIS_MODULE, \ + .min_uV = (_min) * 1000, \ + .uV_step = (_step) * 1000, \ + .vsel_reg = (_vreg), \ + .vsel_mask = (_vmask), \ + .enable_reg = (_ereg), \ + .enable_mask = (_emask), \ + .enable_val = (_enable_val), \ + .disable_val = (_disable_val), \ + .ops = &axp20x_ops, \ + } + +#define AXP20X_DESC(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg, \ + _emask) \ + [AXP20X_##_id] = { \ + .name = #_id, \ + .supply_name = (_supply), \ + .type = REGULATOR_VOLTAGE, \ + .id = AXP20X_##_id, \ + .n_voltages = (((_max) - (_min)) / (_step) + 1), \ + .owner = THIS_MODULE, \ + .min_uV = (_min) * 1000, \ + .uV_step = (_step) * 1000, \ + .vsel_reg = (_vreg), \ + .vsel_mask = (_vmask), \ + .enable_reg = (_ereg), \ + .enable_mask = (_emask), \ + .ops = &axp20x_ops, \ + } + +#define AXP20X_DESC_FIXED(_id, _supply, _volt) \ + [AXP20X_##_id] = { \ + .name = #_id, \ + .supply_name = (_supply), \ + .type = REGULATOR_VOLTAGE, \ + .id = AXP20X_##_id, \ + .n_voltages = 1, \ + .owner = THIS_MODULE, \ + .min_uV = (_volt) * 1000, \ + .ops = &axp20x_ops_fixed \ + } + +#define AXP20X_DESC_TABLE(_id, _supply, _table, _vreg, _vmask, _ereg, _emask) \ + [AXP20X_##_id] = { \ + .name = #_id, \ + .supply_name = (_supply), \ + .type = REGULATOR_VOLTAGE, \ + .id = AXP20X_##_id, \ + .n_voltages = ARRAY_SIZE(_table), \ + .owner = THIS_MODULE, \ + .vsel_reg = (_vreg), \ + .vsel_mask = (_vmask), \ + .enable_reg = (_ereg), \ + .enable_mask = (_emask), \ + .volt_table = (_table), \ + .ops = &axp20x_ops_table, \ + } + +static const int axp20x_ldo4_data[] = { 1250000, 1300000, 1400000, 1500000, 1600000, + 1700000, 1800000, 1900000, 2000000, 2500000, + 2700000, 2800000, 3000000, 3100000, 3200000, + 3300000 }; + +static struct regulator_ops axp20x_ops_fixed = { + .list_voltage = regulator_list_voltage_linear, +}; + +static struct regulator_ops axp20x_ops_table = { + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_ascend, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static struct regulator_ops axp20x_ops = { + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static const struct regulator_desc axp20x_regulators[] = { + AXP20X_DESC(DCDC2, "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT, 0x3f, + AXP20X_PWR_OUT_CTRL, 0x10), + AXP20X_DESC(DCDC3, "vin3", 700, 3500, 25, AXP20X_DCDC3_V_OUT, 0x7f, + AXP20X_PWR_OUT_CTRL, 0x02), + AXP20X_DESC_FIXED(LDO1, "acin", 1300), + AXP20X_DESC(LDO2, "ldo24in", 1800, 3300, 100, AXP20X_LDO24_V_OUT, 0xf0, + AXP20X_PWR_OUT_CTRL, 0x04), + AXP20X_DESC(LDO3, "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT, 0x7f, + AXP20X_PWR_OUT_CTRL, 0x40), + AXP20X_DESC_TABLE(LDO4, "ldo24in", axp20x_ldo4_data, AXP20X_LDO24_V_OUT, 0x0f, + AXP20X_PWR_OUT_CTRL, 0x08), + AXP20X_DESC_IO(LDO5, "ldo5in", 1800, 3300, 100, AXP20X_LDO5_V_OUT, 0xf0, + AXP20X_GPIO0_CTRL, 0x07, AXP20X_IO_ENABLED, + AXP20X_IO_DISABLED), +}; + +#define AXP_MATCH(_name, _id) \ + [AXP20X_##_id] = { \ + .name = #_name, \ + .driver_data = (void *) &axp20x_regulators[AXP20X_##_id], \ + } + +static struct of_regulator_match axp20x_matches[] = { + AXP_MATCH(dcdc2, DCDC2), + AXP_MATCH(dcdc3, DCDC3), + AXP_MATCH(ldo1, LDO1), + AXP_MATCH(ldo2, LDO2), + AXP_MATCH(ldo3, LDO3), + AXP_MATCH(ldo4, LDO4), + AXP_MATCH(ldo5, LDO5), +}; + +static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) +{ + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); + + if (dcdcfreq < 750) { + dcdcfreq = 750; + dev_warn(&pdev->dev, "DCDC frequency too low. Set to 750kHz\n"); + } + + if (dcdcfreq > 1875) { + dcdcfreq = 1875; + dev_warn(&pdev->dev, "DCDC frequency too high. Set to 1875kHz\n"); + } + + dcdcfreq = (dcdcfreq - 750) / 75; + + return regmap_update_bits(axp20x->regmap, AXP20X_DCDC_FREQ, + AXP20X_FREQ_DCDC_MASK, dcdcfreq); +} + +static int axp20x_regulator_parse_dt(struct platform_device *pdev) +{ + struct device_node *np, *regulators; + int ret; + u32 dcdcfreq; + + np = of_node_get(pdev->dev.parent->of_node); + if (!np) + return 0; + + regulators = of_get_child_by_name(np, "regulators"); + if (!regulators) { + dev_warn(&pdev->dev, "regulators node not found\n"); + } else { + ret = of_regulator_match(&pdev->dev, regulators, axp20x_matches, + ARRAY_SIZE(axp20x_matches)); + if (ret < 0) { + dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret); + return ret; + } + + dcdcfreq = 1500; + of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq); + ret = axp20x_set_dcdc_freq(pdev, dcdcfreq); + if (ret < 0) { + dev_err(&pdev->dev, "Error setting dcdc frequency: %d\n", ret); + return ret; + } + + of_node_put(regulators); + } + + return 0; +} + +static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 workmode) +{ + unsigned int mask = AXP20X_WORKMODE_DCDC2_MASK; + + if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3)) + return -EINVAL; + + if (id == AXP20X_DCDC3) + mask = AXP20X_WORKMODE_DCDC3_MASK; + + workmode <<= ffs(mask) - 1; + + return regmap_update_bits(rdev->regmap, AXP20X_DCDC_MODE, mask, workmode); +} + +static int axp20x_regulator_probe(struct platform_device *pdev) +{ + struct regulator_dev *rdev; + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); + struct regulator_config config = { }; + struct regulator_init_data *init_data; + int ret, i; + u32 workmode; + + ret = axp20x_regulator_parse_dt(pdev); + if (ret) + return ret; + + for (i = 0; i < AXP20X_REG_ID_MAX; i++) { + init_data = axp20x_matches[i].init_data; + + config.dev = &pdev->dev; + config.init_data = init_data; + config.regmap = axp20x->regmap; + config.of_node = axp20x_matches[i].of_node; + + rdev = devm_regulator_register(&pdev->dev, &axp20x_regulators[i], + &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "Failed to register %s\n", + axp20x_regulators[i].name); + + return PTR_ERR(rdev); + } + + ret = of_property_read_u32(axp20x_matches[i].of_node, "x-powers,dcdc-workmode", + &workmode); + if (!ret) { + if (axp20x_set_dcdc_workmode(rdev, i, workmode)) + dev_err(&pdev->dev, "Failed to set workmode on %s\n", + axp20x_regulators[i].name); + } + } + + return 0; +} + +static struct platform_driver axp20x_regulator_driver = { + .probe = axp20x_regulator_probe, + .driver = { + .name = "axp20x-regulator", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(axp20x_regulator_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Carlo Caione <carlo@caione.org>"); +MODULE_DESCRIPTION("Regulator Driver for AXP20X PMIC"); diff --git a/drivers/regulator/bcm590xx-regulator.c b/drivers/regulator/bcm590xx-regulator.c index c3750c5..57544e2 100644 --- a/drivers/regulator/bcm590xx-regulator.c +++ b/drivers/regulator/bcm590xx-regulator.c @@ -22,7 +22,7 @@ #include <linux/regulator/of_regulator.h> #include <linux/slab.h> -/* Register defs */ +/* I2C slave 0 registers */ #define BCM590XX_RFLDOPMCTRL1 0x60 #define BCM590XX_IOSR1PMCTRL1 0x7a #define BCM590XX_IOSR2PMCTRL1 0x7c @@ -31,13 +31,34 @@ #define BCM590XX_SDSR2PMCTRL1 0x86 #define BCM590XX_MSRPMCTRL1 0x8a #define BCM590XX_VSRPMCTRL1 0x8e -#define BCM590XX_REG_ENABLE BIT(7) - #define BCM590XX_RFLDOCTRL 0x96 #define BCM590XX_CSRVOUT1 0xc0 + +/* I2C slave 1 registers */ +#define BCM590XX_GPLDO5PMCTRL1 0x16 +#define BCM590XX_GPLDO6PMCTRL1 0x18 +#define BCM590XX_GPLDO1CTRL 0x1a +#define BCM590XX_GPLDO2CTRL 0x1b +#define BCM590XX_GPLDO3CTRL 0x1c +#define BCM590XX_GPLDO4CTRL 0x1d +#define BCM590XX_GPLDO5CTRL 0x1e +#define BCM590XX_GPLDO6CTRL 0x1f +#define BCM590XX_OTG_CTRL 0x40 +#define BCM590XX_GPLDO1PMCTRL1 0x57 +#define BCM590XX_GPLDO2PMCTRL1 0x59 +#define BCM590XX_GPLDO3PMCTRL1 0x5b +#define BCM590XX_GPLDO4PMCTRL1 0x5d + +#define BCM590XX_REG_ENABLE BIT(7) +#define BCM590XX_VBUS_ENABLE BIT(2) #define BCM590XX_LDO_VSEL_MASK GENMASK(5, 3) #define BCM590XX_SR_VSEL_MASK GENMASK(5, 0) +/* + * RFLDO to VSR regulators are + * accessed via I2C slave 0 + */ + /* LDO regulator IDs */ #define BCM590XX_REG_RFLDO 0 #define BCM590XX_REG_CAMLDO1 1 @@ -62,9 +83,25 @@ #define BCM590XX_REG_SDSR2 18 #define BCM590XX_REG_VSR 19 -#define BCM590XX_NUM_REGS 20 +/* + * GPLDO1 to VBUS regulators are + * accessed via I2C slave 1 + */ + +#define BCM590XX_REG_GPLDO1 20 +#define BCM590XX_REG_GPLDO2 21 +#define BCM590XX_REG_GPLDO3 22 +#define BCM590XX_REG_GPLDO4 23 +#define BCM590XX_REG_GPLDO5 24 +#define BCM590XX_REG_GPLDO6 25 +#define BCM590XX_REG_VBUS 26 + +#define BCM590XX_NUM_REGS 27 #define BCM590XX_REG_IS_LDO(n) (n < BCM590XX_REG_CSR) +#define BCM590XX_REG_IS_GPLDO(n) \ + ((n > BCM590XX_REG_VSR) && (n < BCM590XX_REG_VBUS)) +#define BCM590XX_REG_IS_VBUS(n) (n == BCM590XX_REG_VBUS) struct bcm590xx_board { struct regulator_init_data *bcm590xx_pmu_init_data[BCM590XX_NUM_REGS]; @@ -149,6 +186,12 @@ static struct bcm590xx_info bcm590xx_regs[] = { BCM590XX_REG_RANGES(sdsr1, dcdc_sdsr1_ranges), BCM590XX_REG_RANGES(sdsr2, dcdc_iosr1_ranges), BCM590XX_REG_RANGES(vsr, dcdc_iosr1_ranges), + BCM590XX_REG_TABLE(gpldo1, ldo_a_table), + BCM590XX_REG_TABLE(gpldo2, ldo_a_table), + BCM590XX_REG_TABLE(gpldo3, ldo_a_table), + BCM590XX_REG_TABLE(gpldo4, ldo_a_table), + BCM590XX_REG_TABLE(gpldo5, ldo_a_table), + BCM590XX_REG_TABLE(gpldo6, ldo_a_table), }; struct bcm590xx_reg { @@ -161,6 +204,8 @@ static int bcm590xx_get_vsel_register(int id) { if (BCM590XX_REG_IS_LDO(id)) return BCM590XX_RFLDOCTRL + id; + else if (BCM590XX_REG_IS_GPLDO(id)) + return BCM590XX_GPLDO1CTRL + id; else return BCM590XX_CSRVOUT1 + (id - BCM590XX_REG_CSR) * 3; } @@ -171,6 +216,8 @@ static int bcm590xx_get_enable_register(int id) if (BCM590XX_REG_IS_LDO(id)) reg = BCM590XX_RFLDOPMCTRL1 + id * 2; + else if (BCM590XX_REG_IS_GPLDO(id)) + reg = BCM590XX_GPLDO1PMCTRL1 + id * 2; else switch (id) { case BCM590XX_REG_CSR: @@ -191,8 +238,11 @@ static int bcm590xx_get_enable_register(int id) case BCM590XX_REG_SDSR2: reg = BCM590XX_SDSR2PMCTRL1; break; + case BCM590XX_REG_VBUS: + reg = BCM590XX_OTG_CTRL; }; + return reg; } @@ -216,6 +266,12 @@ static struct regulator_ops bcm590xx_ops_dcdc = { .map_voltage = regulator_map_voltage_linear_range, }; +static struct regulator_ops bcm590xx_ops_vbus = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, +}; + #define BCM590XX_MATCH(_name, _id) \ { \ .name = #_name, \ @@ -243,6 +299,13 @@ static struct of_regulator_match bcm590xx_matches[] = { BCM590XX_MATCH(sdsr1, SDSR1), BCM590XX_MATCH(sdsr2, SDSR2), BCM590XX_MATCH(vsr, VSR), + BCM590XX_MATCH(gpldo1, GPLDO1), + BCM590XX_MATCH(gpldo2, GPLDO2), + BCM590XX_MATCH(gpldo3, GPLDO3), + BCM590XX_MATCH(gpldo4, GPLDO4), + BCM590XX_MATCH(gpldo5, GPLDO5), + BCM590XX_MATCH(gpldo6, GPLDO6), + BCM590XX_MATCH(vbus, VBUS), }; static struct bcm590xx_board *bcm590xx_parse_dt_reg_data( @@ -353,17 +416,23 @@ static int bcm590xx_probe(struct platform_device *pdev) pmu->desc[i].linear_ranges = info->linear_ranges; pmu->desc[i].n_linear_ranges = info->n_linear_ranges; - if (BCM590XX_REG_IS_LDO(i)) { + if ((BCM590XX_REG_IS_LDO(i)) || (BCM590XX_REG_IS_GPLDO(i))) { pmu->desc[i].ops = &bcm590xx_ops_ldo; pmu->desc[i].vsel_mask = BCM590XX_LDO_VSEL_MASK; - } else { + } else if (BCM590XX_REG_IS_VBUS(i)) + pmu->desc[i].ops = &bcm590xx_ops_vbus; + else { pmu->desc[i].ops = &bcm590xx_ops_dcdc; pmu->desc[i].vsel_mask = BCM590XX_SR_VSEL_MASK; } - pmu->desc[i].vsel_reg = bcm590xx_get_vsel_register(i); - pmu->desc[i].enable_is_inverted = true; - pmu->desc[i].enable_mask = BCM590XX_REG_ENABLE; + if (BCM590XX_REG_IS_VBUS(i)) + pmu->desc[i].enable_mask = BCM590XX_VBUS_ENABLE; + else { + pmu->desc[i].vsel_reg = bcm590xx_get_vsel_register(i); + pmu->desc[i].enable_is_inverted = true; + pmu->desc[i].enable_mask = BCM590XX_REG_ENABLE; + } pmu->desc[i].enable_reg = bcm590xx_get_enable_register(i); pmu->desc[i].type = REGULATOR_VOLTAGE; pmu->desc[i].owner = THIS_MODULE; @@ -371,7 +440,10 @@ static int bcm590xx_probe(struct platform_device *pdev) config.dev = bcm590xx->dev; config.init_data = reg_data; config.driver_data = pmu; - config.regmap = bcm590xx->regmap; + if (BCM590XX_REG_IS_GPLDO(i) || BCM590XX_REG_IS_VBUS(i)) + config.regmap = bcm590xx->regmap_sec; + else + config.regmap = bcm590xx->regmap_pri; if (bcm590xx_reg_matches) config.of_node = bcm590xx_reg_matches[i].of_node; diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 9a09f3c..4c1f999 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -844,13 +844,22 @@ static int machine_constraints_voltage(struct regulator_dev *rdev, /* do we need to apply the constraint voltage */ if (rdev->constraints->apply_uV && rdev->constraints->min_uV == rdev->constraints->max_uV) { - ret = _regulator_do_set_voltage(rdev, - rdev->constraints->min_uV, - rdev->constraints->max_uV); - if (ret < 0) { - rdev_err(rdev, "failed to apply %duV constraint\n", - rdev->constraints->min_uV); - return ret; + int current_uV = _regulator_get_voltage(rdev); + if (current_uV < 0) { + rdev_err(rdev, "failed to get the current voltage\n"); + return current_uV; + } + if (current_uV < rdev->constraints->min_uV || + current_uV > rdev->constraints->max_uV) { + ret = _regulator_do_set_voltage( + rdev, rdev->constraints->min_uV, + rdev->constraints->max_uV); + if (ret < 0) { + rdev_err(rdev, + "failed to apply %duV constraint\n", + rdev->constraints->min_uV); + return ret; + } } } @@ -1430,9 +1439,9 @@ EXPORT_SYMBOL_GPL(regulator_get); * * Returns a struct regulator corresponding to the regulator producer, * or IS_ERR() condition containing errno. Other consumers will be - * unable to obtain this reference is held and the use count for the - * regulator will be initialised to reflect the current state of the - * regulator. + * unable to obtain this regulator while this reference is held and the + * use count for the regulator will be initialised to reflect the current + * state of the regulator. * * This is intended for use by consumers which cannot tolerate shared * use of the regulator such as those which need to force the @@ -1456,10 +1465,7 @@ EXPORT_SYMBOL_GPL(regulator_get_exclusive); * @id: Supply name or regulator ID. * * Returns a struct regulator corresponding to the regulator producer, - * or IS_ERR() condition containing errno. Other consumers will be - * unable to obtain this reference is held and the use count for the - * regulator will be initialised to reflect the current state of the - * regulator. + * or IS_ERR() condition containing errno. * * This is intended for use by consumers for devices which can have * some supplies unconnected in normal use, such as some MMC devices. @@ -1597,9 +1603,10 @@ EXPORT_SYMBOL_GPL(regulator_unregister_supply_alias); * registered any aliases that were registered will be removed * before returning to the caller. */ -int regulator_bulk_register_supply_alias(struct device *dev, const char **id, +int regulator_bulk_register_supply_alias(struct device *dev, + const char *const *id, struct device *alias_dev, - const char **alias_id, + const char *const *alias_id, int num_id) { int i; @@ -1637,7 +1644,7 @@ EXPORT_SYMBOL_GPL(regulator_bulk_register_supply_alias); * aliases in one operation. */ void regulator_bulk_unregister_supply_alias(struct device *dev, - const char **id, + const char *const *id, int num_id) { int i; @@ -2321,6 +2328,10 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, regulator_list_voltage_linear) ret = regulator_map_voltage_linear(rdev, min_uV, max_uV); + else if (rdev->desc->ops->list_voltage == + regulator_list_voltage_linear_range) + ret = regulator_map_voltage_linear_range(rdev, + min_uV, max_uV); else ret = regulator_map_voltage_iterate(rdev, min_uV, max_uV); @@ -3447,7 +3458,7 @@ regulator_register(const struct regulator_desc *regulator_desc, /* register with sysfs */ rdev->dev.class = ®ulator_class; - rdev->dev.of_node = config->of_node; + rdev->dev.of_node = of_node_get(config->of_node); rdev->dev.parent = dev; dev_set_name(&rdev->dev, "regulator.%d", atomic_inc_return(®ulator_no) - 1); @@ -3589,6 +3600,7 @@ void regulator_unregister(struct regulator_dev *rdev) list_del(&rdev->list); kfree(rdev->constraints); regulator_ena_gpio_free(rdev); + of_node_put(rdev->dev.of_node); device_unregister(&rdev->dev); mutex_unlock(®ulator_list_mutex); } @@ -3819,8 +3831,9 @@ static int __init regulator_init_complete(void) mutex_lock(®ulator_list_mutex); /* If we have a full configuration then disable any regulators - * which are not in use or always_on. This will become the - * default behaviour in the future. + * we have permission to change the status for and which are + * not in use or always_on. This is effectively the default + * for DT and ACPI as they have full constraints. */ list_for_each_entry(rdev, ®ulator_list, list) { ops = rdev->desc->ops; @@ -3829,6 +3842,9 @@ static int __init regulator_init_complete(void) if (c && c->always_on) continue; + if (c && !(c->valid_ops_mask & REGULATOR_CHANGE_STATUS)) + continue; + mutex_lock(&rdev->mutex); if (rdev->use_count) @@ -3867,4 +3883,4 @@ unlock: return 0; } -late_initcall(regulator_init_complete); +late_initcall_sync(regulator_init_complete); diff --git a/drivers/regulator/devres.c b/drivers/regulator/devres.c index f44818b..8f785bc 100644 --- a/drivers/regulator/devres.c +++ b/drivers/regulator/devres.c @@ -360,9 +360,9 @@ EXPORT_SYMBOL_GPL(devm_regulator_unregister_supply_alias); * will be removed before returning to the caller. */ int devm_regulator_bulk_register_supply_alias(struct device *dev, - const char **id, + const char *const *id, struct device *alias_dev, - const char **alias_id, + const char *const *alias_id, int num_id) { int i; @@ -404,7 +404,7 @@ EXPORT_SYMBOL_GPL(devm_regulator_bulk_register_supply_alias); * will ensure that the resource is freed. */ void devm_regulator_bulk_unregister_supply_alias(struct device *dev, - const char **id, + const char *const *id, int num_id) { int i; diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c index c61f7e9..354105e 100644 --- a/drivers/regulator/fixed.c +++ b/drivers/regulator/fixed.c @@ -50,7 +50,6 @@ of_get_fixed_voltage_config(struct device *dev) { struct fixed_voltage_config *config; struct device_node *np = dev->of_node; - const __be32 *delay; struct regulator_init_data *init_data; config = devm_kzalloc(dev, sizeof(struct fixed_voltage_config), @@ -91,15 +90,11 @@ of_get_fixed_voltage_config(struct device *dev) if ((config->gpio == -ENODEV) || (config->gpio == -EPROBE_DEFER)) return ERR_PTR(-EPROBE_DEFER); - delay = of_get_property(np, "startup-delay-us", NULL); - if (delay) - config->startup_delay = be32_to_cpu(*delay); + of_property_read_u32(np, "startup-delay-us", &config->startup_delay); - if (of_find_property(np, "enable-active-high", NULL)) - config->enable_high = true; - - if (of_find_property(np, "gpio-open-drain", NULL)) - config->gpio_is_open_drain = true; + config->enable_high = of_property_read_bool(np, "enable-active-high"); + config->gpio_is_open_drain = of_property_read_bool(np, + "gpio-open-drain"); if (of_find_property(np, "vin-supply", NULL)) config->input_supply = "vin"; diff --git a/drivers/regulator/ltc3589.c b/drivers/regulator/ltc3589.c new file mode 100644 index 0000000..110a99e --- /dev/null +++ b/drivers/regulator/ltc3589.c @@ -0,0 +1,554 @@ +/* + * Linear Technology LTC3589,LTC3589-1 regulator support + * + * Copyright (c) 2014 Philipp Zabel <p.zabel@pengutronix.de>, Pengutronix + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/of_regulator.h> + +#define DRIVER_NAME "ltc3589" + +#define LTC3589_IRQSTAT 0x02 +#define LTC3589_SCR1 0x07 +#define LTC3589_OVEN 0x10 +#define LTC3589_SCR2 0x12 +#define LTC3589_PGSTAT 0x13 +#define LTC3589_VCCR 0x20 +#define LTC3589_CLIRQ 0x21 +#define LTC3589_B1DTV1 0x23 +#define LTC3589_B1DTV2 0x24 +#define LTC3589_VRRCR 0x25 +#define LTC3589_B2DTV1 0x26 +#define LTC3589_B2DTV2 0x27 +#define LTC3589_B3DTV1 0x29 +#define LTC3589_B3DTV2 0x2a +#define LTC3589_L2DTV1 0x32 +#define LTC3589_L2DTV2 0x33 + +#define LTC3589_IRQSTAT_PGOOD_TIMEOUT BIT(3) +#define LTC3589_IRQSTAT_UNDERVOLT_WARN BIT(4) +#define LTC3589_IRQSTAT_UNDERVOLT_FAULT BIT(5) +#define LTC3589_IRQSTAT_THERMAL_WARN BIT(6) +#define LTC3589_IRQSTAT_THERMAL_FAULT BIT(7) + +#define LTC3589_OVEN_SW1 BIT(0) +#define LTC3589_OVEN_SW2 BIT(1) +#define LTC3589_OVEN_SW3 BIT(2) +#define LTC3589_OVEN_BB_OUT BIT(3) +#define LTC3589_OVEN_LDO2 BIT(4) +#define LTC3589_OVEN_LDO3 BIT(5) +#define LTC3589_OVEN_LDO4 BIT(6) +#define LTC3589_OVEN_SW_CTRL BIT(7) + +#define LTC3589_VCCR_SW1_GO BIT(0) +#define LTC3589_VCCR_SW2_GO BIT(2) +#define LTC3589_VCCR_SW3_GO BIT(4) +#define LTC3589_VCCR_LDO2_GO BIT(6) + +enum ltc3589_variant { + LTC3589, + LTC3589_1, + LTC3589_2, +}; + +enum ltc3589_reg { + LTC3589_SW1, + LTC3589_SW2, + LTC3589_SW3, + LTC3589_BB_OUT, + LTC3589_LDO1, + LTC3589_LDO2, + LTC3589_LDO3, + LTC3589_LDO4, + LTC3589_NUM_REGULATORS, +}; + +struct ltc3589_regulator { + struct regulator_desc desc; + + /* External feedback voltage divider */ + unsigned int r1; + unsigned int r2; +}; + +struct ltc3589 { + struct regmap *regmap; + struct device *dev; + enum ltc3589_variant variant; + struct ltc3589_regulator regulator_descs[LTC3589_NUM_REGULATORS]; + struct regulator_dev *regulators[LTC3589_NUM_REGULATORS]; +}; + +static const int ltc3589_ldo4[] = { + 2800000, 2500000, 1800000, 3300000, +}; + +static const int ltc3589_12_ldo4[] = { + 1200000, 1800000, 2500000, 3200000, +}; + +static int ltc3589_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) +{ + struct ltc3589 *ltc3589 = rdev_get_drvdata(rdev); + int sel, shift; + + if (unlikely(ramp_delay <= 0)) + return -EINVAL; + + /* VRRCR slew rate offsets are the same as VCCR go bit offsets */ + shift = ffs(rdev->desc->apply_bit) - 1; + + /* The slew rate can be set to 0.88, 1.75, 3.5, or 7 mV/uS */ + for (sel = 0; sel < 4; sel++) { + if ((880 << sel) >= ramp_delay) { + return regmap_update_bits(ltc3589->regmap, + LTC3589_VRRCR, + 0x3 << shift, sel << shift); + } + } + return -EINVAL; +} + +static int ltc3589_set_suspend_voltage(struct regulator_dev *rdev, int uV) +{ + struct ltc3589 *ltc3589 = rdev_get_drvdata(rdev); + int sel; + + sel = regulator_map_voltage_linear(rdev, uV, uV); + if (sel < 0) + return sel; + + /* DTV2 register follows right after the corresponding DTV1 register */ + return regmap_update_bits(ltc3589->regmap, rdev->desc->vsel_reg + 1, + rdev->desc->vsel_mask, sel); +} + +static int ltc3589_set_suspend_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct ltc3589 *ltc3589 = rdev_get_drvdata(rdev); + int mask, bit = 0; + + /* VCCR reference selects are right next to the VCCR go bits */ + mask = rdev->desc->apply_bit << 1; + + if (mode == REGULATOR_MODE_STANDBY) + bit = mask; /* Select DTV2 */ + + mask |= rdev->desc->apply_bit; + bit |= rdev->desc->apply_bit; + return regmap_update_bits(ltc3589->regmap, LTC3589_VCCR, mask, bit); +} + +/* SW1, SW2, SW3, LDO2 */ +static struct regulator_ops ltc3589_linear_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_ramp_delay = ltc3589_set_ramp_delay, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_suspend_voltage = ltc3589_set_suspend_voltage, + .set_suspend_mode = ltc3589_set_suspend_mode, +}; + +/* BB_OUT, LDO3 */ +static struct regulator_ops ltc3589_fixed_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +/* LDO1 */ +static struct regulator_ops ltc3589_fixed_standby_regulator_ops = { +}; + +/* LDO4 */ +static struct regulator_ops ltc3589_table_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_table, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + + +#define LTC3589_REG(_name, _ops, en_bit, dtv1_reg, dtv_mask, go_bit) \ + [LTC3589_ ## _name] = { \ + .desc = { \ + .name = #_name, \ + .n_voltages = (dtv_mask) + 1, \ + .min_uV = (go_bit) ? 362500 : 0, \ + .uV_step = (go_bit) ? 12500 : 0, \ + .ramp_delay = (go_bit) ? 1750 : 0, \ + .fixed_uV = (dtv_mask) ? 0 : 800000, \ + .ops = <c3589_ ## _ops ## _regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = LTC3589_ ## _name, \ + .owner = THIS_MODULE, \ + .vsel_reg = (dtv1_reg), \ + .vsel_mask = (dtv_mask), \ + .apply_reg = (go_bit) ? LTC3589_VCCR : 0, \ + .apply_bit = (go_bit), \ + .enable_reg = (en_bit) ? LTC3589_OVEN : 0, \ + .enable_mask = (en_bit), \ + }, \ + } + +#define LTC3589_LINEAR_REG(_name, _dtv1) \ + LTC3589_REG(_name, linear, LTC3589_OVEN_ ## _name, \ + LTC3589_ ## _dtv1, 0x1f, \ + LTC3589_VCCR_ ## _name ## _GO) + +#define LTC3589_FIXED_REG(_name) \ + LTC3589_REG(_name, fixed, LTC3589_OVEN_ ## _name, 0, 0, 0) + +static struct ltc3589_regulator ltc3589_regulators[LTC3589_NUM_REGULATORS] = { + LTC3589_LINEAR_REG(SW1, B1DTV1), + LTC3589_LINEAR_REG(SW2, B2DTV1), + LTC3589_LINEAR_REG(SW3, B3DTV1), + LTC3589_FIXED_REG(BB_OUT), + LTC3589_REG(LDO1, fixed_standby, 0, 0, 0, 0), + LTC3589_LINEAR_REG(LDO2, L2DTV1), + LTC3589_FIXED_REG(LDO3), + LTC3589_REG(LDO4, table, LTC3589_OVEN_LDO4, LTC3589_L2DTV2, 0x60, 0), +}; + +#ifdef CONFIG_OF +static struct of_regulator_match ltc3589_matches[LTC3589_NUM_REGULATORS] = { + { .name = "sw1", }, + { .name = "sw2", }, + { .name = "sw3", }, + { .name = "bb-out", }, + { .name = "ldo1", }, /* standby */ + { .name = "ldo2", }, + { .name = "ldo3", }, + { .name = "ldo4", }, +}; + +static int ltc3589_parse_regulators_dt(struct ltc3589 *ltc3589) +{ + struct device *dev = ltc3589->dev; + struct device_node *node; + int i, ret; + + node = of_find_node_by_name(dev->of_node, "regulators"); + if (!node) { + dev_err(dev, "regulators node not found\n"); + return -EINVAL; + } + + ret = of_regulator_match(dev, node, ltc3589_matches, + ARRAY_SIZE(ltc3589_matches)); + of_node_put(node); + if (ret < 0) { + dev_err(dev, "Error parsing regulator init data: %d\n", ret); + return ret; + } + if (ret != LTC3589_NUM_REGULATORS) { + dev_err(dev, "Only %d regulators described in device tree\n", + ret); + return -EINVAL; + } + + /* Parse feedback voltage dividers. LDO3 and LDO4 don't have them */ + for (i = 0; i < LTC3589_LDO3; i++) { + struct ltc3589_regulator *desc = <c3589->regulator_descs[i]; + struct device_node *np = ltc3589_matches[i].of_node; + u32 vdiv[2]; + + ret = of_property_read_u32_array(np, "lltc,fb-voltage-divider", + vdiv, 2); + if (ret) { + dev_err(dev, "Failed to parse voltage divider: %d\n", + ret); + return ret; + } + + desc->r1 = vdiv[0]; + desc->r2 = vdiv[1]; + } + + return 0; +} + +static inline struct regulator_init_data *match_init_data(int index) +{ + return ltc3589_matches[index].init_data; +} + +static inline struct device_node *match_of_node(int index) +{ + return ltc3589_matches[index].of_node; +} +#else +static inline int ltc3589_parse_regulators_dt(struct ltc3589 *ltc3589) +{ + return 0; +} + +static inline struct regulator_init_data *match_init_data(int index) +{ + return NULL; +} + +static inline struct device_node *match_of_node(int index) +{ + return NULL; +} +#endif + +static bool ltc3589_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case LTC3589_IRQSTAT: + case LTC3589_SCR1: + case LTC3589_OVEN: + case LTC3589_SCR2: + case LTC3589_VCCR: + case LTC3589_CLIRQ: + case LTC3589_B1DTV1: + case LTC3589_B1DTV2: + case LTC3589_VRRCR: + case LTC3589_B2DTV1: + case LTC3589_B2DTV2: + case LTC3589_B3DTV1: + case LTC3589_B3DTV2: + case LTC3589_L2DTV1: + case LTC3589_L2DTV2: + return true; + } + return false; +} + +static bool ltc3589_readable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case LTC3589_IRQSTAT: + case LTC3589_SCR1: + case LTC3589_OVEN: + case LTC3589_SCR2: + case LTC3589_PGSTAT: + case LTC3589_VCCR: + case LTC3589_B1DTV1: + case LTC3589_B1DTV2: + case LTC3589_VRRCR: + case LTC3589_B2DTV1: + case LTC3589_B2DTV2: + case LTC3589_B3DTV1: + case LTC3589_B3DTV2: + case LTC3589_L2DTV1: + case LTC3589_L2DTV2: + return true; + } + return false; +} + +static bool ltc3589_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case LTC3589_IRQSTAT: + case LTC3589_PGSTAT: + return true; + } + return false; +} + +struct reg_default ltc3589_reg_defaults[] = { + { LTC3589_SCR1, 0x00 }, + { LTC3589_OVEN, 0x00 }, + { LTC3589_SCR2, 0x00 }, + { LTC3589_VCCR, 0x00 }, + { LTC3589_B1DTV1, 0x19 }, + { LTC3589_B1DTV2, 0x19 }, + { LTC3589_VRRCR, 0xff }, + { LTC3589_B2DTV1, 0x19 }, + { LTC3589_B2DTV2, 0x19 }, + { LTC3589_B3DTV1, 0x19 }, + { LTC3589_B3DTV2, 0x19 }, + { LTC3589_L2DTV1, 0x19 }, + { LTC3589_L2DTV2, 0x19 }, +}; + +static const struct regmap_config ltc3589_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .writeable_reg = ltc3589_writeable_reg, + .readable_reg = ltc3589_readable_reg, + .volatile_reg = ltc3589_volatile_reg, + .max_register = LTC3589_L2DTV2, + .reg_defaults = ltc3589_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(ltc3589_reg_defaults), + .use_single_rw = true, + .cache_type = REGCACHE_RBTREE, +}; + + +static irqreturn_t ltc3589_isr(int irq, void *dev_id) +{ + struct ltc3589 *ltc3589 = dev_id; + unsigned int i, irqstat, event; + + regmap_read(ltc3589->regmap, LTC3589_IRQSTAT, &irqstat); + + if (irqstat & LTC3589_IRQSTAT_THERMAL_WARN) { + event = REGULATOR_EVENT_OVER_TEMP; + for (i = 0; i < LTC3589_NUM_REGULATORS; i++) + regulator_notifier_call_chain(ltc3589->regulators[i], + event, NULL); + } + + if (irqstat & LTC3589_IRQSTAT_UNDERVOLT_WARN) { + event = REGULATOR_EVENT_UNDER_VOLTAGE; + for (i = 0; i < LTC3589_NUM_REGULATORS; i++) + regulator_notifier_call_chain(ltc3589->regulators[i], + event, NULL); + } + + /* Clear warning condition */ + regmap_write(ltc3589->regmap, LTC3589_CLIRQ, 0); + + return IRQ_HANDLED; +} + +static inline unsigned int ltc3589_scale(unsigned int uV, u32 r1, u32 r2) +{ + uint64_t tmp; + if (uV == 0) + return 0; + tmp = (uint64_t)uV * r1; + do_div(tmp, r2); + return uV + (unsigned int)tmp; +} + +static void ltc3589_apply_fb_voltage_divider(struct ltc3589_regulator *rdesc) +{ + struct regulator_desc *desc = &rdesc->desc; + + if (!rdesc->r1 || !rdesc->r2) + return; + + desc->min_uV = ltc3589_scale(desc->min_uV, rdesc->r1, rdesc->r2); + desc->uV_step = ltc3589_scale(desc->uV_step, rdesc->r1, rdesc->r2); + desc->fixed_uV = ltc3589_scale(desc->fixed_uV, rdesc->r1, rdesc->r2); +} + +static int ltc3589_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct ltc3589_regulator *descs; + struct ltc3589 *ltc3589; + int i, ret; + + ltc3589 = devm_kzalloc(dev, sizeof(*ltc3589), GFP_KERNEL); + if (!ltc3589) + return -ENOMEM; + + i2c_set_clientdata(client, ltc3589); + ltc3589->variant = id->driver_data; + ltc3589->dev = dev; + + descs = ltc3589->regulator_descs; + memcpy(descs, ltc3589_regulators, sizeof(ltc3589_regulators)); + if (ltc3589->variant == LTC3589) { + descs[LTC3589_LDO3].desc.fixed_uV = 1800000; + descs[LTC3589_LDO4].desc.volt_table = ltc3589_ldo4; + } else { + descs[LTC3589_LDO3].desc.fixed_uV = 2800000; + descs[LTC3589_LDO4].desc.volt_table = ltc3589_12_ldo4; + } + + ltc3589->regmap = devm_regmap_init_i2c(client, <c3589_regmap_config); + if (IS_ERR(ltc3589->regmap)) { + ret = PTR_ERR(ltc3589->regmap); + dev_err(dev, "failed to initialize regmap: %d\n", ret); + return ret; + } + + ret = ltc3589_parse_regulators_dt(ltc3589); + if (ret) + return ret; + + for (i = 0; i < LTC3589_NUM_REGULATORS; i++) { + struct ltc3589_regulator *rdesc = <c3589->regulator_descs[i]; + struct regulator_desc *desc = &rdesc->desc; + struct regulator_init_data *init_data; + struct regulator_config config = { }; + + init_data = match_init_data(i); + + if (i < LTC3589_LDO3) + ltc3589_apply_fb_voltage_divider(rdesc); + + config.dev = dev; + config.init_data = init_data; + config.driver_data = ltc3589; + config.of_node = match_of_node(i); + + ltc3589->regulators[i] = devm_regulator_register(dev, desc, + &config); + if (IS_ERR(ltc3589->regulators[i])) { + ret = PTR_ERR(ltc3589->regulators[i]); + dev_err(dev, "failed to register regulator %s: %d\n", + desc->name, ret); + return ret; + } + } + + ret = devm_request_threaded_irq(dev, client->irq, NULL, ltc3589_isr, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + client->name, ltc3589); + if (ret) { + dev_err(dev, "Failed to request IRQ: %d\n", ret); + return ret; + } + + return 0; +} + +static struct i2c_device_id ltc3589_i2c_id[] = { + { "ltc3589", LTC3589 }, + { "ltc3589-1", LTC3589_1 }, + { "ltc3589-2", LTC3589_2 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ltc3589_i2c_id); + +static struct i2c_driver ltc3589_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, + .probe = ltc3589_probe, + .id_table = ltc3589_i2c_id, +}; +module_i2c_driver(ltc3589_driver); + +MODULE_AUTHOR("Philipp Zabel <p.zabel@pengutronix.de>"); +MODULE_DESCRIPTION("Regulator driver for Linear Technology LTC3589(-1,2)"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("i2c:ltc3589"); diff --git a/drivers/regulator/max8649.c b/drivers/regulator/max8649.c index 3172da8..c8bddcc 100644 --- a/drivers/regulator/max8649.c +++ b/drivers/regulator/max8649.c @@ -161,10 +161,8 @@ static int max8649_regulator_probe(struct i2c_client *client, info = devm_kzalloc(&client->dev, sizeof(struct max8649_regulator_info), GFP_KERNEL); - if (!info) { - dev_err(&client->dev, "No enough memory\n"); + if (!info) return -ENOMEM; - } info->regmap = devm_regmap_init_i2c(client, &max8649_regmap_config); if (IS_ERR(info->regmap)) { diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index ea4f36f..ee5e67b 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -19,9 +19,7 @@ static void of_get_regulation_constraints(struct device_node *np, struct regulator_init_data **init_data) { - const __be32 *min_uV, *max_uV, *uV_offset; - const __be32 *min_uA, *max_uA, *ramp_delay; - struct property *prop; + const __be32 *min_uV, *max_uV; struct regulation_constraints *constraints = &(*init_data)->constraints; int ret; u32 pval; @@ -42,36 +40,29 @@ static void of_get_regulation_constraints(struct device_node *np, if (min_uV && max_uV && constraints->min_uV == constraints->max_uV) constraints->apply_uV = true; - uV_offset = of_get_property(np, "regulator-microvolt-offset", NULL); - if (uV_offset) - constraints->uV_offset = be32_to_cpu(*uV_offset); - min_uA = of_get_property(np, "regulator-min-microamp", NULL); - if (min_uA) - constraints->min_uA = be32_to_cpu(*min_uA); - max_uA = of_get_property(np, "regulator-max-microamp", NULL); - if (max_uA) - constraints->max_uA = be32_to_cpu(*max_uA); + if (!of_property_read_u32(np, "regulator-microvolt-offset", &pval)) + constraints->uV_offset = pval; + if (!of_property_read_u32(np, "regulator-min-microamp", &pval)) + constraints->min_uA = pval; + if (!of_property_read_u32(np, "regulator-max-microamp", &pval)) + constraints->max_uA = pval; /* Current change possible? */ if (constraints->min_uA != constraints->max_uA) constraints->valid_ops_mask |= REGULATOR_CHANGE_CURRENT; - if (of_find_property(np, "regulator-boot-on", NULL)) - constraints->boot_on = true; - - if (of_find_property(np, "regulator-always-on", NULL)) - constraints->always_on = true; - else /* status change should be possible if not always on. */ + constraints->boot_on = of_property_read_bool(np, "regulator-boot-on"); + constraints->always_on = of_property_read_bool(np, "regulator-always-on"); + if (!constraints->always_on) /* status change should be possible. */ constraints->valid_ops_mask |= REGULATOR_CHANGE_STATUS; if (of_property_read_bool(np, "regulator-allow-bypass")) constraints->valid_ops_mask |= REGULATOR_CHANGE_BYPASS; - prop = of_find_property(np, "regulator-ramp-delay", NULL); - if (prop && prop->value) { - ramp_delay = prop->value; - if (*ramp_delay) - constraints->ramp_delay = be32_to_cpu(*ramp_delay); + ret = of_property_read_u32(np, "regulator-ramp-delay", &pval); + if (!ret) { + if (pval) + constraints->ramp_delay = pval; else constraints->ramp_disable = true; } @@ -106,6 +97,20 @@ struct regulator_init_data *of_get_regulator_init_data(struct device *dev, } EXPORT_SYMBOL_GPL(of_get_regulator_init_data); +struct devm_of_regulator_matches { + struct of_regulator_match *matches; + unsigned int num_matches; +}; + +static void devm_of_regulator_put_matches(struct device *dev, void *res) +{ + struct devm_of_regulator_matches *devm_matches = res; + int i; + + for (i = 0; i < devm_matches->num_matches; i++) + of_node_put(devm_matches->matches[i].of_node); +} + /** * of_regulator_match - extract multiple regulator init data from device tree. * @dev: device requesting the data @@ -119,7 +124,8 @@ EXPORT_SYMBOL_GPL(of_get_regulator_init_data); * regulator. The data parsed from a child node will be matched to a regulator * based on either the deprecated property regulator-compatible if present, * or otherwise the child node's name. Note that the match table is modified - * in place. + * in place and an additional of_node reference is taken for each matched + * regulator. * * Returns the number of matches found or a negative error code on failure. */ @@ -131,10 +137,22 @@ int of_regulator_match(struct device *dev, struct device_node *node, unsigned int i; const char *name; struct device_node *child; + struct devm_of_regulator_matches *devm_matches; if (!dev || !node) return -EINVAL; + devm_matches = devres_alloc(devm_of_regulator_put_matches, + sizeof(struct devm_of_regulator_matches), + GFP_KERNEL); + if (!devm_matches) + return -ENOMEM; + + devm_matches->matches = matches; + devm_matches->num_matches = num_matches; + + devres_add(dev, devm_matches); + for (i = 0; i < num_matches; i++) { struct of_regulator_match *match = &matches[i]; match->init_data = NULL; @@ -162,7 +180,7 @@ int of_regulator_match(struct device *dev, struct device_node *node, child->name); return -EINVAL; } - match->of_node = child; + match->of_node = of_node_get(child); count++; break; } diff --git a/drivers/regulator/pbias-regulator.c b/drivers/regulator/pbias-regulator.c index ded3b35..6d38be3 100644 --- a/drivers/regulator/pbias-regulator.c +++ b/drivers/regulator/pbias-regulator.c @@ -38,66 +38,24 @@ struct pbias_reg_info { struct pbias_regulator_data { struct regulator_desc desc; void __iomem *pbias_addr; - unsigned int pbias_reg; struct regulator_dev *dev; struct regmap *syscon; const struct pbias_reg_info *info; int voltage; }; -static int pbias_regulator_set_voltage(struct regulator_dev *dev, - int min_uV, int max_uV, unsigned *selector) -{ - struct pbias_regulator_data *data = rdev_get_drvdata(dev); - const struct pbias_reg_info *info = data->info; - int ret, vmode; - - if (min_uV <= 1800000) - vmode = 0; - else if (min_uV > 1800000) - vmode = info->vmode; - - ret = regmap_update_bits(data->syscon, data->pbias_reg, - info->vmode, vmode); - - return ret; -} - -static int pbias_regulator_get_voltage(struct regulator_dev *rdev) -{ - struct pbias_regulator_data *data = rdev_get_drvdata(rdev); - const struct pbias_reg_info *info = data->info; - int value, voltage; - - regmap_read(data->syscon, data->pbias_reg, &value); - value &= info->vmode; - - voltage = value ? 3000000 : 1800000; - - return voltage; -} +static const unsigned int pbias_volt_table[] = { + 1800000, + 3000000 +}; static int pbias_regulator_enable(struct regulator_dev *rdev) { struct pbias_regulator_data *data = rdev_get_drvdata(rdev); const struct pbias_reg_info *info = data->info; - int ret; - - ret = regmap_update_bits(data->syscon, data->pbias_reg, - info->enable_mask, info->enable); - - return ret; -} - -static int pbias_regulator_disable(struct regulator_dev *rdev) -{ - struct pbias_regulator_data *data = rdev_get_drvdata(rdev); - const struct pbias_reg_info *info = data->info; - int ret; - ret = regmap_update_bits(data->syscon, data->pbias_reg, - info->enable_mask, 0); - return ret; + return regmap_update_bits(data->syscon, rdev->desc->enable_reg, + info->enable_mask, info->enable); } static int pbias_regulator_is_enable(struct regulator_dev *rdev) @@ -106,17 +64,18 @@ static int pbias_regulator_is_enable(struct regulator_dev *rdev) const struct pbias_reg_info *info = data->info; int value; - regmap_read(data->syscon, data->pbias_reg, &value); + regmap_read(data->syscon, rdev->desc->enable_reg, &value); - return (value & info->enable_mask) == info->enable_mask; + return (value & info->enable_mask) == info->enable; } static struct regulator_ops pbias_regulator_voltage_ops = { - .set_voltage = pbias_regulator_set_voltage, - .get_voltage = pbias_regulator_get_voltage, - .enable = pbias_regulator_enable, - .disable = pbias_regulator_disable, - .is_enabled = pbias_regulator_is_enable, + .list_voltage = regulator_list_voltage_table, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .enable = pbias_regulator_enable, + .disable = regulator_disable_regmap, + .is_enabled = pbias_regulator_is_enable, }; static const struct pbias_reg_info pbias_mmc_omap2430 = { @@ -192,6 +151,7 @@ static int pbias_regulator_probe(struct platform_device *pdev) if (IS_ERR(syscon)) return PTR_ERR(syscon); + cfg.regmap = syscon; cfg.dev = &pdev->dev; for (idx = 0; idx < PBIAS_NUM_REGS && data_idx < count; idx++) { @@ -207,15 +167,19 @@ static int pbias_regulator_probe(struct platform_device *pdev) if (!res) return -EINVAL; - drvdata[data_idx].pbias_reg = res->start; drvdata[data_idx].syscon = syscon; drvdata[data_idx].info = info; drvdata[data_idx].desc.name = info->name; drvdata[data_idx].desc.owner = THIS_MODULE; drvdata[data_idx].desc.type = REGULATOR_VOLTAGE; drvdata[data_idx].desc.ops = &pbias_regulator_voltage_ops; + drvdata[data_idx].desc.volt_table = pbias_volt_table; drvdata[data_idx].desc.n_voltages = 2; drvdata[data_idx].desc.enable_time = info->enable_time; + drvdata[data_idx].desc.vsel_reg = res->start; + drvdata[data_idx].desc.vsel_mask = info->vmode; + drvdata[data_idx].desc.enable_reg = res->start; + drvdata[data_idx].desc.enable_mask = info->enable_mask; cfg.init_data = pbias_matches[idx].init_data; cfg.driver_data = &drvdata[data_idx]; diff --git a/drivers/regulator/s2mpa01.c b/drivers/regulator/s2mpa01.c index f19a30f..a52cb1c 100644 --- a/drivers/regulator/s2mpa01.c +++ b/drivers/regulator/s2mpa01.c @@ -116,7 +116,6 @@ static int s2mpa01_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) ramp_delay = s2mpa01->ramp_delay16; ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT; - ramp_reg = S2MPA01_REG_RAMP1; break; case S2MPA01_BUCK2: enable_shift = S2MPA01_BUCK2_RAMP_EN_SHIFT; |