diff options
Diffstat (limited to 'drivers/regulator/qcom_spmi-regulator.c')
| -rw-r--r-- | drivers/regulator/qcom_spmi-regulator.c | 133 |
1 files changed, 130 insertions, 3 deletions
diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c index 63c7a0c..9817f1a 100644 --- a/drivers/regulator/qcom_spmi-regulator.c +++ b/drivers/regulator/qcom_spmi-regulator.c @@ -25,6 +25,8 @@ #include <linux/regulator/driver.h> #include <linux/regmap.h> #include <linux/list.h> +#include <linux/mfd/syscon.h> +#include <linux/io.h> /* Pin control enable input pins. */ #define SPMI_REGULATOR_PIN_CTRL_ENABLE_NONE 0x00 @@ -181,6 +183,23 @@ enum spmi_boost_byp_registers { SPMI_BOOST_BYP_REG_CURRENT_LIMIT = 0x4b, }; +enum spmi_saw3_registers { + SAW3_SECURE = 0x00, + SAW3_ID = 0x04, + SAW3_SPM_STS = 0x0C, + SAW3_AVS_STS = 0x10, + SAW3_PMIC_STS = 0x14, + SAW3_RST = 0x18, + SAW3_VCTL = 0x1C, + SAW3_AVS_CTL = 0x20, + SAW3_AVS_LIMIT = 0x24, + SAW3_AVS_DLY = 0x28, + SAW3_AVS_HYSTERESIS = 0x2C, + SAW3_SPM_STS2 = 0x38, + SAW3_SPM_PMIC_DATA_3 = 0x4C, + SAW3_VERSION = 0xFD0, +}; + /* Used for indexing into ctrl_reg. These are offets from 0x40 */ enum spmi_common_control_register_index { SPMI_COMMON_IDX_VOLTAGE_RANGE = 0, @@ -1035,6 +1054,89 @@ static irqreturn_t spmi_regulator_vs_ocp_isr(int irq, void *data) return IRQ_HANDLED; } +#define SAW3_VCTL_DATA_MASK 0xFF +#define SAW3_VCTL_CLEAR_MASK 0x700FF +#define SAW3_AVS_CTL_EN_MASK 0x1 +#define SAW3_AVS_CTL_TGGL_MASK 0x8000000 +#define SAW3_AVS_CTL_CLEAR_MASK 0x7efc00 + +static struct regmap *saw_regmap = NULL; + +static void spmi_saw_set_vdd(void *data) +{ + u32 vctl, data3, avs_ctl, pmic_sts; + bool avs_enabled = false; + unsigned long timeout; + u8 voltage_sel = *(u8 *)data; + + regmap_read(saw_regmap, SAW3_AVS_CTL, &avs_ctl); + regmap_read(saw_regmap, SAW3_VCTL, &vctl); + regmap_read(saw_regmap, SAW3_SPM_PMIC_DATA_3, &data3); + + /* select the band */ + vctl &= ~SAW3_VCTL_CLEAR_MASK; + vctl |= (u32)voltage_sel; + + data3 &= ~SAW3_VCTL_CLEAR_MASK; + data3 |= (u32)voltage_sel; + + /* If AVS is enabled, switch it off during the voltage change */ + avs_enabled = SAW3_AVS_CTL_EN_MASK & avs_ctl; + if (avs_enabled) { + avs_ctl &= ~SAW3_AVS_CTL_TGGL_MASK; + regmap_write(saw_regmap, SAW3_AVS_CTL, avs_ctl); + } + + regmap_write(saw_regmap, SAW3_RST, 1); + regmap_write(saw_regmap, SAW3_VCTL, vctl); + regmap_write(saw_regmap, SAW3_SPM_PMIC_DATA_3, data3); + + timeout = jiffies + usecs_to_jiffies(100); + do { + regmap_read(saw_regmap, SAW3_PMIC_STS, &pmic_sts); + pmic_sts &= SAW3_VCTL_DATA_MASK; + if (pmic_sts == (u32)voltage_sel) + break; + + cpu_relax(); + + } while (time_before(jiffies, timeout)); + + /* After successful voltage change, switch the AVS back on */ + if (avs_enabled) { + pmic_sts &= 0x3f; + avs_ctl &= ~SAW3_AVS_CTL_CLEAR_MASK; + avs_ctl |= ((pmic_sts - 4) << 10); + avs_ctl |= (pmic_sts << 17); + avs_ctl |= SAW3_AVS_CTL_TGGL_MASK; + regmap_write(saw_regmap, SAW3_AVS_CTL, avs_ctl); + } +} + +static int +spmi_regulator_saw_set_voltage(struct regulator_dev *rdev, unsigned selector) +{ + struct spmi_regulator *vreg = rdev_get_drvdata(rdev); + int ret; + u8 range_sel, voltage_sel; + + ret = spmi_sw_selector_to_hw(vreg, selector, &range_sel, &voltage_sel); + if (ret) + return ret; + + if (0 != range_sel) { + dev_dbg(&rdev->dev, "range_sel = %02X voltage_sel = %02X", \ + range_sel, voltage_sel); + return -EINVAL; + } + + /* Always do the SAW register writes on the first CPU */ + return smp_call_function_single(0, spmi_saw_set_vdd, \ + &voltage_sel, true); +} + +static struct regulator_ops spmi_saw_ops = {}; + static struct regulator_ops spmi_smps_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, @@ -1250,6 +1352,7 @@ static int spmi_regulator_match(struct spmi_regulator *vreg, u16 force_type) } dig_major_rev = version[SPMI_COMMON_REG_DIG_MAJOR_REV - SPMI_COMMON_REG_DIG_MAJOR_REV]; + if (!force_type) { type = version[SPMI_COMMON_REG_TYPE - SPMI_COMMON_REG_DIG_MAJOR_REV]; @@ -1648,7 +1751,9 @@ static int qcom_spmi_regulator_probe(struct platform_device *pdev) struct regmap *regmap; const char *name; struct device *dev = &pdev->dev; - int ret; + struct device_node *node = pdev->dev.of_node; + struct device_node *syscon; + int ret, lenp; struct list_head *vreg_list; vreg_list = devm_kzalloc(dev, sizeof(*vreg_list), GFP_KERNEL); @@ -1665,7 +1770,22 @@ static int qcom_spmi_regulator_probe(struct platform_device *pdev) if (!match) return -ENODEV; + if (of_find_property(node, "qcom,saw-reg", &lenp)) { + syscon = of_parse_phandle(node, "qcom,saw-reg", 0); + saw_regmap = syscon_node_to_regmap(syscon); + of_node_put(syscon); + if (IS_ERR(regmap)) + dev_err(dev, "ERROR reading SAW regmap\n"); + } + for (reg = match->data; reg->name; reg++) { + + if (saw_regmap && \ + of_find_property(of_find_node_by_name(node, reg->name), \ + "qcom,saw-slave", &lenp)) { + continue; + } + vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL); if (!vreg) return -ENOMEM; @@ -1673,7 +1793,6 @@ static int qcom_spmi_regulator_probe(struct platform_device *pdev) vreg->dev = dev; vreg->base = reg->base; vreg->regmap = regmap; - if (reg->ocp) { vreg->ocp_irq = platform_get_irq_byname(pdev, reg->ocp); if (vreg->ocp_irq < 0) { @@ -1681,7 +1800,6 @@ static int qcom_spmi_regulator_probe(struct platform_device *pdev) goto err; } } - vreg->desc.id = -1; vreg->desc.owner = THIS_MODULE; vreg->desc.type = REGULATOR_VOLTAGE; @@ -1698,6 +1816,15 @@ static int qcom_spmi_regulator_probe(struct platform_device *pdev) if (ret) continue; + if (saw_regmap && \ + of_find_property(of_find_node_by_name(node, reg->name), \ + "qcom,saw-leader", &lenp)) { + spmi_saw_ops = *(vreg->desc.ops); + spmi_saw_ops.set_voltage_sel = \ + spmi_regulator_saw_set_voltage; + vreg->desc.ops = &spmi_saw_ops; + } + config.dev = dev; config.driver_data = vreg; config.regmap = regmap; |
