diff options
Diffstat (limited to 'drivers/rapidio/rio.c')
| -rw-r--r-- | drivers/rapidio/rio.c | 510 |
1 files changed, 510 insertions, 0 deletions
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c new file mode 100644 index 0000000..3ca1011 --- /dev/null +++ b/drivers/rapidio/rio.c @@ -0,0 +1,510 @@ +/* + * RapidIO interconnect services + * (RapidIO Interconnect Specification, http://www.rapidio.org) + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter <mporter@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/kernel.h> + +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/rio.h> +#include <linux/rio_drv.h> +#include <linux/rio_ids.h> +#include <linux/rio_regs.h> +#include <linux/module.h> +#include <linux/spinlock.h> + +#include "rio.h" + +static LIST_HEAD(rio_mports); + +/** + * rio_local_get_device_id - Get the base/extended device id for a port + * @port: RIO master port from which to get the deviceid + * + * Reads the base/extended device id from the local device + * implementing the master port. Returns the 8/16-bit device + * id. + */ +u16 rio_local_get_device_id(struct rio_mport *port) +{ + u32 result; + + rio_local_read_config_32(port, RIO_DID_CSR, &result); + + return (RIO_GET_DID(result)); +} + +/** + * rio_request_inb_mbox - request inbound mailbox service + * @mport: RIO master port from which to allocate the mailbox resource + * @dev_id: Device specific pointer to pass on event + * @mbox: Mailbox number to claim + * @entries: Number of entries in inbound mailbox queue + * @minb: Callback to execute when inbound message is received + * + * Requests ownership of an inbound mailbox resource and binds + * a callback function to the resource. Returns %0 on success. + */ +int rio_request_inb_mbox(struct rio_mport *mport, + void *dev_id, + int mbox, + int entries, + void (*minb) (struct rio_mport * mport, void *dev_id, int mbox, + int slot)) +{ + int rc = 0; + + struct resource *res = kmalloc(sizeof(struct resource), GFP_KERNEL); + + if (res) { + rio_init_mbox_res(res, mbox, mbox); + + /* Make sure this mailbox isn't in use */ + if ((rc = + request_resource(&mport->riores[RIO_INB_MBOX_RESOURCE], + res)) < 0) { + kfree(res); + goto out; + } + + mport->inb_msg[mbox].res = res; + + /* Hook the inbound message callback */ + mport->inb_msg[mbox].mcback = minb; + + rc = rio_open_inb_mbox(mport, dev_id, mbox, entries); + } else + rc = -ENOMEM; + + out: + return rc; +} + +/** + * rio_release_inb_mbox - release inbound mailbox message service + * @mport: RIO master port from which to release the mailbox resource + * @mbox: Mailbox number to release + * + * Releases ownership of an inbound mailbox resource. Returns 0 + * if the request has been satisfied. + */ +int rio_release_inb_mbox(struct rio_mport *mport, int mbox) +{ + rio_close_inb_mbox(mport, mbox); + + /* Release the mailbox resource */ + return release_resource(mport->inb_msg[mbox].res); +} + +/** + * rio_request_outb_mbox - request outbound mailbox service + * @mport: RIO master port from which to allocate the mailbox resource + * @dev_id: Device specific pointer to pass on event + * @mbox: Mailbox number to claim + * @entries: Number of entries in outbound mailbox queue + * @moutb: Callback to execute when outbound message is sent + * + * Requests ownership of an outbound mailbox resource and binds + * a callback function to the resource. Returns 0 on success. + */ +int rio_request_outb_mbox(struct rio_mport *mport, + void *dev_id, + int mbox, + int entries, + void (*moutb) (struct rio_mport * mport, void *dev_id, int mbox, int slot)) +{ + int rc = 0; + + struct resource *res = kmalloc(sizeof(struct resource), GFP_KERNEL); + + if (res) { + rio_init_mbox_res(res, mbox, mbox); + + /* Make sure this outbound mailbox isn't in use */ + if ((rc = + request_resource(&mport->riores[RIO_OUTB_MBOX_RESOURCE], + res)) < 0) { + kfree(res); + goto out; + } + + mport->outb_msg[mbox].res = res; + + /* Hook the inbound message callback */ + mport->outb_msg[mbox].mcback = moutb; + + rc = rio_open_outb_mbox(mport, dev_id, mbox, entries); + } else + rc = -ENOMEM; + + out: + return rc; +} + +/** + * rio_release_outb_mbox - release outbound mailbox message service + * @mport: RIO master port from which to release the mailbox resource + * @mbox: Mailbox number to release + * + * Releases ownership of an inbound mailbox resource. Returns 0 + * if the request has been satisfied. + */ +int rio_release_outb_mbox(struct rio_mport *mport, int mbox) +{ + rio_close_outb_mbox(mport, mbox); + + /* Release the mailbox resource */ + return release_resource(mport->outb_msg[mbox].res); +} + +/** + * rio_setup_inb_dbell - bind inbound doorbell callback + * @mport: RIO master port to bind the doorbell callback + * @dev_id: Device specific pointer to pass on event + * @res: Doorbell message resource + * @dinb: Callback to execute when doorbell is received + * + * Adds a doorbell resource/callback pair into a port's + * doorbell event list. Returns 0 if the request has been + * satisfied. + */ +static int +rio_setup_inb_dbell(struct rio_mport *mport, void *dev_id, struct resource *res, + void (*dinb) (struct rio_mport * mport, void *dev_id, u16 src, u16 dst, + u16 info)) +{ + int rc = 0; + struct rio_dbell *dbell; + + if (!(dbell = kmalloc(sizeof(struct rio_dbell), GFP_KERNEL))) { + rc = -ENOMEM; + goto out; + } + + dbell->res = res; + dbell->dinb = dinb; + dbell->dev_id = dev_id; + + list_add_tail(&dbell->node, &mport->dbells); + + out: + return rc; +} + +/** + * rio_request_inb_dbell - request inbound doorbell message service + * @mport: RIO master port from which to allocate the doorbell resource + * @dev_id: Device specific pointer to pass on event + * @start: Doorbell info range start + * @end: Doorbell info range end + * @dinb: Callback to execute when doorbell is received + * + * Requests ownership of an inbound doorbell resource and binds + * a callback function to the resource. Returns 0 if the request + * has been satisfied. + */ +int rio_request_inb_dbell(struct rio_mport *mport, + void *dev_id, + u16 start, + u16 end, + void (*dinb) (struct rio_mport * mport, void *dev_id, u16 src, + u16 dst, u16 info)) +{ + int rc = 0; + + struct resource *res = kmalloc(sizeof(struct resource), GFP_KERNEL); + + if (res) { + rio_init_dbell_res(res, start, end); + + /* Make sure these doorbells aren't in use */ + if ((rc = + request_resource(&mport->riores[RIO_DOORBELL_RESOURCE], + res)) < 0) { + kfree(res); + goto out; + } + + /* Hook the doorbell callback */ + rc = rio_setup_inb_dbell(mport, dev_id, res, dinb); + } else + rc = -ENOMEM; + + out: + return rc; +} + +/** + * rio_release_inb_dbell - release inbound doorbell message service + * @mport: RIO master port from which to release the doorbell resource + * @start: Doorbell info range start + * @end: Doorbell info range end + * + * Releases ownership of an inbound doorbell resource and removes + * callback from the doorbell event list. Returns 0 if the request + * has been satisfied. + */ +int rio_release_inb_dbell(struct rio_mport *mport, u16 start, u16 end) +{ + int rc = 0, found = 0; + struct rio_dbell *dbell; + + list_for_each_entry(dbell, &mport->dbells, node) { + if ((dbell->res->start == start) && (dbell->res->end == end)) { + found = 1; + break; + } + } + + /* If we can't find an exact match, fail */ + if (!found) { + rc = -EINVAL; + goto out; + } + + /* Delete from list */ + list_del(&dbell->node); + + /* Release the doorbell resource */ + rc = release_resource(dbell->res); + + /* Free the doorbell event */ + kfree(dbell); + + out: + return rc; +} + +/** + * rio_request_outb_dbell - request outbound doorbell message range + * @rdev: RIO device from which to allocate the doorbell resource + * @start: Doorbell message range start + * @end: Doorbell message range end + * + * Requests ownership of a doorbell message range. Returns a resource + * if the request has been satisfied or %NULL on failure. + */ +struct resource *rio_request_outb_dbell(struct rio_dev *rdev, u16 start, + u16 end) +{ + struct resource *res = kmalloc(sizeof(struct resource), GFP_KERNEL); + + if (res) { + rio_init_dbell_res(res, start, end); + + /* Make sure these doorbells aren't in use */ + if (request_resource(&rdev->riores[RIO_DOORBELL_RESOURCE], res) + < 0) { + kfree(res); + res = NULL; + } + } + + return res; +} + +/** + * rio_release_outb_dbell - release outbound doorbell message range + * @rdev: RIO device from which to release the doorbell resource + * @res: Doorbell resource to be freed + * + * Releases ownership of a doorbell message range. Returns 0 if the + * request has been satisfied. + */ +int rio_release_outb_dbell(struct rio_dev *rdev, struct resource *res) +{ + int rc = release_resource(res); + + kfree(res); + + return rc; +} + +/** + * rio_mport_get_feature - query for devices' extended features + * @port: Master port to issue transaction + * @local: Indicate a local master port or remote device access + * @destid: Destination ID of the device + * @hopcount: Number of switch hops to the device + * @ftr: Extended feature code + * + * Tell if a device supports a given RapidIO capability. + * Returns the offset of the requested extended feature + * block within the device's RIO configuration space or + * 0 in case the device does not support it. Possible + * values for @ftr: + * + * %RIO_EFB_PAR_EP_ID LP/LVDS EP Devices + * + * %RIO_EFB_PAR_EP_REC_ID LP/LVDS EP Recovery Devices + * + * %RIO_EFB_PAR_EP_FREE_ID LP/LVDS EP Free Devices + * + * %RIO_EFB_SER_EP_ID LP/Serial EP Devices + * + * %RIO_EFB_SER_EP_REC_ID LP/Serial EP Recovery Devices + * + * %RIO_EFB_SER_EP_FREE_ID LP/Serial EP Free Devices + */ +u32 +rio_mport_get_feature(struct rio_mport * port, int local, u16 destid, + u8 hopcount, int ftr) +{ + u32 asm_info, ext_ftr_ptr, ftr_header; + + if (local) + rio_local_read_config_32(port, RIO_ASM_INFO_CAR, &asm_info); + else + rio_mport_read_config_32(port, destid, hopcount, + RIO_ASM_INFO_CAR, &asm_info); + + ext_ftr_ptr = asm_info & RIO_EXT_FTR_PTR_MASK; + + while (ext_ftr_ptr) { + if (local) + rio_local_read_config_32(port, ext_ftr_ptr, + &ftr_header); + else + rio_mport_read_config_32(port, destid, hopcount, + ext_ftr_ptr, &ftr_header); + if (RIO_GET_BLOCK_ID(ftr_header) == ftr) + return ext_ftr_ptr; + if (!(ext_ftr_ptr = RIO_GET_BLOCK_PTR(ftr_header))) + break; + } + + return 0; +} + +/** + * rio_get_asm - Begin or continue searching for a RIO device by vid/did/asm_vid/asm_did + * @vid: RIO vid to match or %RIO_ANY_ID to match all vids + * @did: RIO did to match or %RIO_ANY_ID to match all dids + * @asm_vid: RIO asm_vid to match or %RIO_ANY_ID to match all asm_vids + * @asm_did: RIO asm_did to match or %RIO_ANY_ID to match all asm_dids + * @from: Previous RIO device found in search, or %NULL for new search + * + * Iterates through the list of known RIO devices. If a RIO device is + * found with a matching @vid, @did, @asm_vid, @asm_did, the reference + * count to the device is incrememted and a pointer to its device + * structure is returned. Otherwise, %NULL is returned. A new search + * is initiated by passing %NULL to the @from argument. Otherwise, if + * @from is not %NULL, searches continue from next device on the global + * list. The reference count for @from is always decremented if it is + * not %NULL. + */ +struct rio_dev *rio_get_asm(u16 vid, u16 did, + u16 asm_vid, u16 asm_did, struct rio_dev *from) +{ + struct list_head *n; + struct rio_dev *rdev; + + WARN_ON(in_interrupt()); + spin_lock(&rio_global_list_lock); + n = from ? from->global_list.next : rio_devices.next; + + while (n && (n != &rio_devices)) { + rdev = rio_dev_g(n); + if ((vid == RIO_ANY_ID || rdev->vid == vid) && + (did == RIO_ANY_ID || rdev->did == did) && + (asm_vid == RIO_ANY_ID || rdev->asm_vid == asm_vid) && + (asm_did == RIO_ANY_ID || rdev->asm_did == asm_did)) + goto exit; + n = n->next; + } + rdev = NULL; + exit: + rio_dev_put(from); + rdev = rio_dev_get(rdev); + spin_unlock(&rio_global_list_lock); + return rdev; +} + +/** + * rio_get_device - Begin or continue searching for a RIO device by vid/did + * @vid: RIO vid to match or %RIO_ANY_ID to match all vids + * @did: RIO did to match or %RIO_ANY_ID to match all dids + * @from: Previous RIO device found in search, or %NULL for new search + * + * Iterates through the list of known RIO devices. If a RIO device is + * found with a matching @vid and @did, the reference count to the + * device is incrememted and a pointer to its device structure is returned. + * Otherwise, %NULL is returned. A new search is initiated by passing %NULL + * to the @from argument. Otherwise, if @from is not %NULL, searches + * continue from next device on the global list. The reference count for + * @from is always decremented if it is not %NULL. + */ +struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from) +{ + return rio_get_asm(vid, did, RIO_ANY_ID, RIO_ANY_ID, from); +} + +static void rio_fixup_device(struct rio_dev *dev) +{ +} + +static int __devinit rio_init(void) +{ + struct rio_dev *dev = NULL; + + while ((dev = rio_get_device(RIO_ANY_ID, RIO_ANY_ID, dev)) != NULL) { + rio_fixup_device(dev); + } + return 0; +} + +device_initcall(rio_init); + +int rio_init_mports(void) +{ + int rc = 0; + struct rio_mport *port; + + list_for_each_entry(port, &rio_mports, node) { + if (!request_mem_region(port->iores.start, + port->iores.end - port->iores.start, + port->name)) { + printk(KERN_ERR + "RIO: Error requesting master port region %8.8lx-%8.8lx\n", + port->iores.start, port->iores.end - 1); + rc = -ENOMEM; + goto out; + } + + if (port->host_deviceid >= 0) + rio_enum_mport(port); + else + rio_disc_mport(port); + } + + out: + return rc; +} + +void rio_register_mport(struct rio_mport *port) +{ + list_add_tail(&port->node, &rio_mports); +} + +EXPORT_SYMBOL_GPL(rio_local_get_device_id); +EXPORT_SYMBOL_GPL(rio_get_device); +EXPORT_SYMBOL_GPL(rio_get_asm); +EXPORT_SYMBOL_GPL(rio_request_inb_dbell); +EXPORT_SYMBOL_GPL(rio_release_inb_dbell); +EXPORT_SYMBOL_GPL(rio_request_outb_dbell); +EXPORT_SYMBOL_GPL(rio_release_outb_dbell); +EXPORT_SYMBOL_GPL(rio_request_inb_mbox); +EXPORT_SYMBOL_GPL(rio_release_inb_mbox); +EXPORT_SYMBOL_GPL(rio_request_outb_mbox); +EXPORT_SYMBOL_GPL(rio_release_outb_mbox); |
