summaryrefslogtreecommitdiffstats
path: root/drivers/power
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/power')
-rw-r--r--drivers/power/Kconfig11
-rw-r--r--drivers/power/Makefile1
-rw-r--r--drivers/power/bq27x00_battery.c177
-rw-r--r--drivers/power/da9030_battery.c2
-rw-r--r--drivers/power/max8925_power.c534
-rw-r--r--drivers/power/power_supply_sysfs.c1
-rw-r--r--drivers/power/wm8350_power.c26
-rw-r--r--drivers/power/wm97xx_battery.c4
8 files changed, 694 insertions, 62 deletions
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index d4b3d67..faaa9b4 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -29,6 +29,13 @@ config APM_POWER
Say Y here to enable support APM status emulation using
battery class devices.
+config MAX8925_POWER
+ tristate "MAX8925 battery charger support"
+ depends on MFD_MAX8925
+ help
+ Say Y here to enable support for the battery charger in the Maxim
+ MAX8925 PMIC.
+
config WM831X_BACKUP
tristate "WM831X backup battery charger support"
depends on MFD_WM831X
@@ -98,10 +105,10 @@ config BATTERY_WM97XX
Say Y to enable support for battery measured by WM97xx aux port.
config BATTERY_BQ27x00
- tristate "BQ27200 battery driver"
+ tristate "BQ27x00 battery driver"
depends on I2C
help
- Say Y here to enable support for batteries with BQ27200(I2C) chip.
+ Say Y here to enable support for batteries with BQ27x00 (I2C) chips.
config BATTERY_DA9030
tristate "DA9030 battery driver"
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 573597c..a2ba7c85 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_POWER_SUPPLY) += power_supply.o
obj-$(CONFIG_PDA_POWER) += pda_power.o
obj-$(CONFIG_APM_POWER) += apm_power.o
+obj-$(CONFIG_MAX8925_POWER) += max8925_power.o
obj-$(CONFIG_WM831X_BACKUP) += wm831x_backup.o
obj-$(CONFIG_WM831X_POWER) += wm831x_power.o
obj-$(CONFIG_WM8350_POWER) += wm8350_power.o
diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
index 62bb981..bece33e 100644
--- a/drivers/power/bq27x00_battery.c
+++ b/drivers/power/bq27x00_battery.c
@@ -26,13 +26,22 @@
#include <linux/i2c.h>
#include <asm/unaligned.h>
-#define DRIVER_VERSION "1.0.0"
+#define DRIVER_VERSION "1.1.0"
#define BQ27x00_REG_TEMP 0x06
#define BQ27x00_REG_VOLT 0x08
-#define BQ27x00_REG_RSOC 0x0B /* Relative State-of-Charge */
#define BQ27x00_REG_AI 0x14
#define BQ27x00_REG_FLAGS 0x0A
+#define BQ27x00_REG_TTE 0x16
+#define BQ27x00_REG_TTF 0x18
+#define BQ27x00_REG_TTECP 0x26
+
+#define BQ27000_REG_RSOC 0x0B /* Relative State-of-Charge */
+#define BQ27000_FLAG_CHGS BIT(7)
+
+#define BQ27500_REG_SOC 0x2c
+#define BQ27500_FLAG_DSC BIT(0)
+#define BQ27500_FLAG_FC BIT(9)
/* If the system has several batteries we need a different name for each
* of them...
@@ -46,25 +55,28 @@ struct bq27x00_access_methods {
struct bq27x00_device_info *di);
};
+enum bq27x00_chip { BQ27000, BQ27500 };
+
struct bq27x00_device_info {
struct device *dev;
int id;
- int voltage_uV;
- int current_uA;
- int temp_C;
- int charge_rsoc;
struct bq27x00_access_methods *bus;
struct power_supply bat;
+ enum bq27x00_chip chip;
struct i2c_client *client;
};
static enum power_supply_property bq27x00_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_CURRENT_NOW,
POWER_SUPPLY_PROP_CAPACITY,
POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
};
/*
@@ -74,16 +86,11 @@ static enum power_supply_property bq27x00_battery_props[] = {
static int bq27x00_read(u8 reg, int *rt_value, int b_single,
struct bq27x00_device_info *di)
{
- int ret;
-
- ret = di->bus->read(reg, rt_value, b_single, di);
- *rt_value = be16_to_cpu(*rt_value);
-
- return ret;
+ return di->bus->read(reg, rt_value, b_single, di);
}
/*
- * Return the battery temperature in Celsius degrees
+ * Return the battery temperature in tenths of degree Celsius
* Or < 0 if something fails.
*/
static int bq27x00_battery_temperature(struct bq27x00_device_info *di)
@@ -97,7 +104,10 @@ static int bq27x00_battery_temperature(struct bq27x00_device_info *di)
return ret;
}
- return (temp >> 2) - 273;
+ if (di->chip == BQ27500)
+ return temp - 2731;
+ else
+ return ((temp >> 2) - 273) * 10;
}
/*
@@ -115,7 +125,7 @@ static int bq27x00_battery_voltage(struct bq27x00_device_info *di)
return ret;
}
- return volt;
+ return volt * 1000;
}
/*
@@ -134,16 +144,23 @@ static int bq27x00_battery_current(struct bq27x00_device_info *di)
dev_err(di->dev, "error reading current\n");
return 0;
}
- ret = bq27x00_read(BQ27x00_REG_FLAGS, &flags, 0, di);
- if (ret < 0) {
- dev_err(di->dev, "error reading flags\n");
- return 0;
- }
- if ((flags & (1 << 7)) != 0) {
- dev_dbg(di->dev, "negative current!\n");
- return -curr;
+
+ if (di->chip == BQ27500) {
+ /* bq27500 returns signed value */
+ curr = (int)(s16)curr;
+ } else {
+ ret = bq27x00_read(BQ27x00_REG_FLAGS, &flags, 0, di);
+ if (ret < 0) {
+ dev_err(di->dev, "error reading flags\n");
+ return 0;
+ }
+ if (flags & BQ27000_FLAG_CHGS) {
+ dev_dbg(di->dev, "negative current!\n");
+ curr = -curr;
+ }
}
- return curr;
+
+ return curr * 1000;
}
/*
@@ -155,13 +172,70 @@ static int bq27x00_battery_rsoc(struct bq27x00_device_info *di)
int ret;
int rsoc = 0;
- ret = bq27x00_read(BQ27x00_REG_RSOC, &rsoc, 1, di);
+ if (di->chip == BQ27500)
+ ret = bq27x00_read(BQ27500_REG_SOC, &rsoc, 0, di);
+ else
+ ret = bq27x00_read(BQ27000_REG_RSOC, &rsoc, 1, di);
if (ret) {
dev_err(di->dev, "error reading relative State-of-Charge\n");
return ret;
}
- return rsoc >> 8;
+ return rsoc;
+}
+
+static int bq27x00_battery_status(struct bq27x00_device_info *di,
+ union power_supply_propval *val)
+{
+ int flags = 0;
+ int status;
+ int ret;
+
+ ret = bq27x00_read(BQ27x00_REG_FLAGS, &flags, 0, di);
+ if (ret < 0) {
+ dev_err(di->dev, "error reading flags\n");
+ return ret;
+ }
+
+ if (di->chip == BQ27500) {
+ if (flags & BQ27500_FLAG_FC)
+ status = POWER_SUPPLY_STATUS_FULL;
+ else if (flags & BQ27500_FLAG_DSC)
+ status = POWER_SUPPLY_STATUS_DISCHARGING;
+ else
+ status = POWER_SUPPLY_STATUS_CHARGING;
+ } else {
+ if (flags & BQ27000_FLAG_CHGS)
+ status = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ status = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+
+ val->intval = status;
+ return 0;
+}
+
+/*
+ * Read a time register.
+ * Return < 0 if something fails.
+ */
+static int bq27x00_battery_time(struct bq27x00_device_info *di, int reg,
+ union power_supply_propval *val)
+{
+ int tval = 0;
+ int ret;
+
+ ret = bq27x00_read(reg, &tval, 0, di);
+ if (ret) {
+ dev_err(di->dev, "error reading register %02x\n", reg);
+ return ret;
+ }
+
+ if (tval == 65535)
+ return -ENODATA;
+
+ val->intval = tval * 60;
+ return 0;
}
#define to_bq27x00_device_info(x) container_of((x), \
@@ -171,9 +245,13 @@ static int bq27x00_battery_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
+ int ret = 0;
struct bq27x00_device_info *di = to_bq27x00_device_info(psy);
switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = bq27x00_battery_status(di, val);
+ break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
case POWER_SUPPLY_PROP_PRESENT:
val->intval = bq27x00_battery_voltage(di);
@@ -189,11 +267,20 @@ static int bq27x00_battery_get_property(struct power_supply *psy,
case POWER_SUPPLY_PROP_TEMP:
val->intval = bq27x00_battery_temperature(di);
break;
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+ ret = bq27x00_battery_time(di, BQ27x00_REG_TTE, val);
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+ ret = bq27x00_battery_time(di, BQ27x00_REG_TTECP, val);
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW:
+ ret = bq27x00_battery_time(di, BQ27x00_REG_TTF, val);
+ break;
default:
return -EINVAL;
}
- return 0;
+ return ret;
}
static void bq27x00_powersupply_init(struct bq27x00_device_info *di)
@@ -206,10 +293,10 @@ static void bq27x00_powersupply_init(struct bq27x00_device_info *di)
}
/*
- * BQ27200 specific code
+ * i2c specific code
*/
-static int bq27200_read(u8 reg, int *rt_value, int b_single,
+static int bq27x00_read_i2c(u8 reg, int *rt_value, int b_single,
struct bq27x00_device_info *di)
{
struct i2c_client *client = di->client;
@@ -238,7 +325,7 @@ static int bq27200_read(u8 reg, int *rt_value, int b_single,
err = i2c_transfer(client->adapter, msg, 1);
if (err >= 0) {
if (!b_single)
- *rt_value = get_unaligned_be16(data);
+ *rt_value = get_unaligned_le16(data);
else
*rt_value = data[0];
@@ -248,7 +335,7 @@ static int bq27200_read(u8 reg, int *rt_value, int b_single,
return err;
}
-static int bq27200_battery_probe(struct i2c_client *client,
+static int bq27x00_battery_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
char *name;
@@ -267,7 +354,7 @@ static int bq27200_battery_probe(struct i2c_client *client,
if (retval < 0)
return retval;
- name = kasprintf(GFP_KERNEL, "bq27200-%d", num);
+ name = kasprintf(GFP_KERNEL, "%s-%d", id->name, num);
if (!name) {
dev_err(&client->dev, "failed to allocate device name\n");
retval = -ENOMEM;
@@ -281,6 +368,7 @@ static int bq27200_battery_probe(struct i2c_client *client,
goto batt_failed_2;
}
di->id = num;
+ di->chip = id->driver_data;
bus = kzalloc(sizeof(*bus), GFP_KERNEL);
if (!bus) {
@@ -293,7 +381,7 @@ static int bq27200_battery_probe(struct i2c_client *client,
i2c_set_clientdata(client, di);
di->dev = &client->dev;
di->bat.name = name;
- bus->read = &bq27200_read;
+ bus->read = &bq27x00_read_i2c;
di->bus = bus;
di->client = client;
@@ -323,7 +411,7 @@ batt_failed_1:
return retval;
}
-static int bq27200_battery_remove(struct i2c_client *client)
+static int bq27x00_battery_remove(struct i2c_client *client)
{
struct bq27x00_device_info *di = i2c_get_clientdata(client);
@@ -344,27 +432,28 @@ static int bq27200_battery_remove(struct i2c_client *client)
* Module stuff
*/
-static const struct i2c_device_id bq27200_id[] = {
- { "bq27200", 0 },
+static const struct i2c_device_id bq27x00_id[] = {
+ { "bq27200", BQ27000 }, /* bq27200 is same as bq27000, but with i2c */
+ { "bq27500", BQ27500 },
{},
};
-static struct i2c_driver bq27200_battery_driver = {
+static struct i2c_driver bq27x00_battery_driver = {
.driver = {
- .name = "bq27200-battery",
+ .name = "bq27x00-battery",
},
- .probe = bq27200_battery_probe,
- .remove = bq27200_battery_remove,
- .id_table = bq27200_id,
+ .probe = bq27x00_battery_probe,
+ .remove = bq27x00_battery_remove,
+ .id_table = bq27x00_id,
};
static int __init bq27x00_battery_init(void)
{
int ret;
- ret = i2c_add_driver(&bq27200_battery_driver);
+ ret = i2c_add_driver(&bq27x00_battery_driver);
if (ret)
- printk(KERN_ERR "Unable to register BQ27200 driver\n");
+ printk(KERN_ERR "Unable to register BQ27x00 driver\n");
return ret;
}
@@ -372,7 +461,7 @@ module_init(bq27x00_battery_init);
static void __exit bq27x00_battery_exit(void)
{
- i2c_del_driver(&bq27200_battery_driver);
+ i2c_del_driver(&bq27x00_battery_driver);
}
module_exit(bq27x00_battery_exit);
diff --git a/drivers/power/da9030_battery.c b/drivers/power/da9030_battery.c
index 336419813..a2e71f7 100644
--- a/drivers/power/da9030_battery.c
+++ b/drivers/power/da9030_battery.c
@@ -509,7 +509,7 @@ static int da9030_battery_probe(struct platform_device *pdev)
charger->master = pdev->dev.parent;
- /* 10 seconds between monotor runs unless platfrom defines other
+ /* 10 seconds between monitor runs unless platform defines other
interval */
charger->interval = msecs_to_jiffies(
(pdata->batmon_interval ? : 10) * 1000);
diff --git a/drivers/power/max8925_power.c b/drivers/power/max8925_power.c
new file mode 100644
index 0000000..a1b4410
--- /dev/null
+++ b/drivers/power/max8925_power.c
@@ -0,0 +1,534 @@
+/*
+ * Battery driver for Maxim MAX8925
+ *
+ * Copyright (c) 2009-2010 Marvell International Ltd.
+ * Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/max8925.h>
+
+/* registers in GPM */
+#define MAX8925_OUT5VEN 0x54
+#define MAX8925_OUT3VEN 0x58
+#define MAX8925_CHG_CNTL1 0x7c
+
+/* bits definition */
+#define MAX8925_CHG_STAT_VSYSLOW (1 << 0)
+#define MAX8925_CHG_STAT_MODE_MASK (3 << 2)
+#define MAX8925_CHG_STAT_EN_MASK (1 << 4)
+#define MAX8925_CHG_MBDET (1 << 1)
+#define MAX8925_CHG_AC_RANGE_MASK (3 << 6)
+
+/* registers in ADC */
+#define MAX8925_ADC_RES_CNFG1 0x06
+#define MAX8925_ADC_AVG_CNFG1 0x07
+#define MAX8925_ADC_ACQ_CNFG1 0x08
+#define MAX8925_ADC_ACQ_CNFG2 0x09
+/* 2 bytes registers in below. MSB is 1st, LSB is 2nd. */
+#define MAX8925_ADC_AUX2 0x62
+#define MAX8925_ADC_VCHG 0x64
+#define MAX8925_ADC_VBBATT 0x66
+#define MAX8925_ADC_VMBATT 0x68
+#define MAX8925_ADC_ISNS 0x6a
+#define MAX8925_ADC_THM 0x6c
+#define MAX8925_ADC_TDIE 0x6e
+#define MAX8925_CMD_AUX2 0xc8
+#define MAX8925_CMD_VCHG 0xd0
+#define MAX8925_CMD_VBBATT 0xd8
+#define MAX8925_CMD_VMBATT 0xe0
+#define MAX8925_CMD_ISNS 0xe8
+#define MAX8925_CMD_THM 0xf0
+#define MAX8925_CMD_TDIE 0xf8
+
+enum {
+ MEASURE_AUX2,
+ MEASURE_VCHG,
+ MEASURE_VBBATT,
+ MEASURE_VMBATT,
+ MEASURE_ISNS,
+ MEASURE_THM,
+ MEASURE_TDIE,
+ MEASURE_MAX,
+};
+
+struct max8925_power_info {
+ struct max8925_chip *chip;
+ struct i2c_client *gpm;
+ struct i2c_client *adc;
+
+ struct power_supply ac;
+ struct power_supply usb;
+ struct power_supply battery;
+ int irq_base;
+ unsigned ac_online:1;
+ unsigned usb_online:1;
+ unsigned bat_online:1;
+ unsigned chg_mode:2;
+ unsigned batt_detect:1; /* detecing MB by ID pin */
+ unsigned topoff_threshold:2;
+ unsigned fast_charge:3;
+
+ int (*set_charger) (int);
+};
+
+static int __set_charger(struct max8925_power_info *info, int enable)
+{
+ struct max8925_chip *chip = info->chip;
+ if (enable) {
+ /* enable charger in platform */
+ if (info->set_charger)
+ info->set_charger(1);
+ /* enable charger */
+ max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 0);
+ } else {
+ /* disable charge */
+ max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 1 << 7);
+ if (info->set_charger)
+ info->set_charger(0);
+ }
+ dev_dbg(chip->dev, "%s\n", (enable) ? "Enable charger"
+ : "Disable charger");
+ return 0;
+}
+
+static irqreturn_t max8925_charger_handler(int irq, void *data)
+{
+ struct max8925_power_info *info = (struct max8925_power_info *)data;
+ struct max8925_chip *chip = info->chip;
+
+ switch (irq - chip->irq_base) {
+ case MAX8925_IRQ_VCHG_DC_R:
+ info->ac_online = 1;
+ __set_charger(info, 1);
+ dev_dbg(chip->dev, "Adapter inserted\n");
+ break;
+ case MAX8925_IRQ_VCHG_DC_F:
+ info->ac_online = 0;
+ __set_charger(info, 0);
+ dev_dbg(chip->dev, "Adapter is removal\n");
+ break;
+ case MAX8925_IRQ_VCHG_USB_R:
+ info->usb_online = 1;
+ __set_charger(info, 1);
+ dev_dbg(chip->dev, "USB inserted\n");
+ break;
+ case MAX8925_IRQ_VCHG_USB_F:
+ info->usb_online = 0;
+ __set_charger(info, 0);
+ dev_dbg(chip->dev, "USB is removal\n");
+ break;
+ case MAX8925_IRQ_VCHG_THM_OK_F:
+ /* Battery is not ready yet */
+ dev_dbg(chip->dev, "Battery temperature is out of range\n");
+ case MAX8925_IRQ_VCHG_DC_OVP:
+ dev_dbg(chip->dev, "Error detection\n");
+ __set_charger(info, 0);
+ break;
+ case MAX8925_IRQ_VCHG_THM_OK_R:
+ /* Battery is ready now */
+ dev_dbg(chip->dev, "Battery temperature is in range\n");
+ break;
+ case MAX8925_IRQ_VCHG_SYSLOW_R:
+ /* VSYS is low */
+ dev_info(chip->dev, "Sys power is too low\n");
+ break;
+ case MAX8925_IRQ_VCHG_SYSLOW_F:
+ dev_dbg(chip->dev, "Sys power is above low threshold\n");
+ break;
+ case MAX8925_IRQ_VCHG_DONE:
+ __set_charger(info, 0);
+ dev_dbg(chip->dev, "Charging is done\n");
+ break;
+ case MAX8925_IRQ_VCHG_TOPOFF:
+ dev_dbg(chip->dev, "Charging in top-off mode\n");
+ break;
+ case MAX8925_IRQ_VCHG_TMR_FAULT:
+ __set_charger(info, 0);
+ dev_dbg(chip->dev, "Safe timer is expired\n");
+ break;
+ case MAX8925_IRQ_VCHG_RST:
+ __set_charger(info, 0);
+ dev_dbg(chip->dev, "Charger is reset\n");
+ break;
+ }
+ return IRQ_HANDLED;
+}
+
+static int start_measure(struct max8925_power_info *info, int type)
+{
+ unsigned char buf[2] = {0, 0};
+ int meas_reg = 0, ret;
+
+ switch (type) {
+ case MEASURE_VCHG:
+ meas_reg = MAX8925_ADC_VCHG;
+ break;
+ case MEASURE_VBBATT:
+ meas_reg = MAX8925_ADC_VBBATT;
+ break;
+ case MEASURE_VMBATT:
+ meas_reg = MAX8925_ADC_VMBATT;
+ break;
+ case MEASURE_ISNS:
+ meas_reg = MAX8925_ADC_ISNS;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ max8925_bulk_read(info->adc, meas_reg, 2, buf);
+ ret = (buf[0] << 4) | (buf[1] >> 4);
+
+ return ret;
+}
+
+static int max8925_ac_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max8925_power_info *info = dev_get_drvdata(psy->dev->parent);
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = info->ac_online;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ if (info->ac_online) {
+ ret = start_measure(info, MEASURE_VCHG);
+ if (ret >= 0) {
+ val->intval = ret << 1; /* unit is mV */
+ goto out;
+ }
+ }
+ ret = -ENODATA;
+ break;
+ default:
+ ret = -ENODEV;
+ break;
+ }
+out:
+ return ret;
+}
+
+static enum power_supply_property max8925_ac_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+static int max8925_usb_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max8925_power_info *info = dev_get_drvdata(psy->dev->parent);
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = info->usb_online;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ if (info->usb_online) {
+ ret = start_measure(info, MEASURE_VCHG);
+ if (ret >= 0) {
+ val->intval = ret << 1; /* unit is mV */
+ goto out;
+ }
+ }
+ ret = -ENODATA;
+ break;
+ default:
+ ret = -ENODEV;
+ break;
+ }
+out:
+ return ret;
+}
+
+static enum power_supply_property max8925_usb_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+static int max8925_bat_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max8925_power_info *info = dev_get_drvdata(psy->dev->parent);
+ long long int tmp = 0;
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = info->bat_online;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ if (info->bat_online) {
+ ret = start_measure(info, MEASURE_VMBATT);
+ if (ret >= 0) {
+ val->intval = ret << 1; /* unit is mV */
+ ret = 0;
+ break;
+ }
+ }
+ ret = -ENODATA;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ if (info->bat_online) {
+ ret = start_measure(info, MEASURE_ISNS);
+ if (ret >= 0) {
+ tmp = (long long int)ret * 6250 / 4096 - 3125;
+ ret = (int)tmp;
+ val->intval = 0;
+ if (ret > 0)
+ val->intval = ret; /* unit is mA */
+ ret = 0;
+ break;
+ }
+ }
+ ret = -ENODATA;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ if (!info->bat_online) {
+ ret = -ENODATA;
+ break;
+ }
+ ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS);
+ ret = (ret & MAX8925_CHG_STAT_MODE_MASK) >> 2;
+ switch (ret) {
+ case 1:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ break;
+ case 0:
+ case 2:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ break;
+ case 3:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ break;
+ }
+ ret = 0;
+ break;
+ case POWER_SUPPLY_PROP_STATUS:
+ if (!info->bat_online) {
+ ret = -ENODATA;
+ break;
+ }
+ ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS);
+ if (info->usb_online || info->ac_online) {
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ if (ret & MAX8925_CHG_STAT_EN_MASK)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ } else
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ ret = 0;
+ break;
+ default:
+ ret = -ENODEV;
+ break;
+ }
+ return ret;
+}
+
+static enum power_supply_property max8925_battery_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_STATUS,
+};
+
+#define REQUEST_IRQ(_irq, _name) \
+do { \
+ ret = request_threaded_irq(chip->irq_base + _irq, NULL, \
+ max8925_charger_handler, \
+ IRQF_ONESHOT, _name, info); \
+ if (ret) \
+ dev_err(chip->dev, "Failed to request IRQ #%d: %d\n", \
+ _irq, ret); \
+} while (0)
+
+static __devinit int max8925_init_charger(struct max8925_chip *chip,
+ struct max8925_power_info *info)
+{
+ int ret;
+
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_OVP, "ac-ovp");
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_F, "ac-remove");
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_R, "ac-insert");
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_OVP, "usb-ovp");
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_F, "usb-remove");
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_R, "usb-insert");
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_R, "batt-temp-in-range");
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_F, "batt-temp-out-range");
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_SYSLOW_F, "vsys-high");
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_SYSLOW_R, "vsys-low");
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_RST, "charger-reset");
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_DONE, "charger-done");
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_TOPOFF, "charger-topoff");
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_TMR_FAULT, "charger-timer-expire");
+
+ info->ac_online = 0;
+ info->usb_online = 0;
+ info->bat_online = 0;
+ ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS);
+ if (ret >= 0) {
+ /*
+ * If battery detection is enabled, ID pin of battery is
+ * connected to MBDET pin of MAX8925. It could be used to
+ * detect battery presence.
+ * Otherwise, we have to assume that battery is always on.
+ */
+ if (info->batt_detect)
+ info->bat_online = (ret & MAX8925_CHG_MBDET) ? 0 : 1;
+ else
+ info->bat_online = 1;
+ if (ret & MAX8925_CHG_AC_RANGE_MASK)
+ info->ac_online = 1;
+ else
+ info->ac_online = 0;
+ }
+ /* disable charge */
+ max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 1 << 7);
+ /* set charging current in charge topoff mode */
+ max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 3 << 5,
+ info->topoff_threshold << 5);
+ /* set charing current in fast charge mode */
+ max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 7, info->fast_charge);
+
+ return 0;
+}
+
+static __devexit int max8925_deinit_charger(struct max8925_power_info *info)
+{
+ struct max8925_chip *chip = info->chip;
+ int irq;
+
+ irq = chip->irq_base + MAX8925_IRQ_VCHG_DC_OVP;
+ for (; irq <= chip->irq_base + MAX8925_IRQ_VCHG_TMR_FAULT; irq++)
+ free_irq(irq, info);
+
+ return 0;
+}
+
+static __devinit int max8925_power_probe(struct platform_device *pdev)
+{
+ struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
+ struct max8925_platform_data *max8925_pdata;
+ struct max8925_power_pdata *pdata = NULL;
+ struct max8925_power_info *info;
+ int ret;
+
+ if (pdev->dev.parent->platform_data) {
+ max8925_pdata = pdev->dev.parent->platform_data;
+ pdata = max8925_pdata->power;
+ }
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "platform data isn't assigned to "
+ "power supply\n");
+ return -EINVAL;
+ }
+
+ info = kzalloc(sizeof(struct max8925_power_info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+ info->chip = chip;
+ info->gpm = chip->i2c;
+ info->adc = chip->adc;
+
+ info->ac.name = "max8925-ac";
+ info->ac.type = POWER_SUPPLY_TYPE_MAINS;
+ info->ac.properties = max8925_ac_props;
+ info->ac.num_properties = ARRAY_SIZE(max8925_ac_props);
+ info->ac.get_property = max8925_ac_get_prop;
+ ret = power_supply_register(&pdev->dev, &info->ac);
+ if (ret)
+ goto out;
+ info->ac.dev->parent = &pdev->dev;
+
+ info->usb.name = "max8925-usb";
+ info->usb.type = POWER_SUPPLY_TYPE_USB;
+ info->usb.properties = max8925_usb_props;
+ info->usb.num_properties = ARRAY_SIZE(max8925_usb_props);
+ info->usb.get_property = max8925_usb_get_prop;
+ ret = power_supply_register(&pdev->dev, &info->usb);
+ if (ret)
+ goto out_usb;
+ info->usb.dev->parent = &pdev->dev;
+
+ info->battery.name = "max8925-battery";
+ info->battery.type = POWER_SUPPLY_TYPE_BATTERY;
+ info->battery.properties = max8925_battery_props;
+ info->battery.num_properties = ARRAY_SIZE(max8925_battery_props);
+ info->battery.get_property = max8925_bat_get_prop;
+ ret = power_supply_register(&pdev->dev, &info->battery);
+ if (ret)
+ goto out_battery;
+ info->battery.dev->parent = &pdev->dev;
+
+ info->batt_detect = pdata->batt_detect;
+ info->topoff_threshold = pdata->topoff_threshold;
+ info->fast_charge = pdata->fast_charge;
+ info->set_charger = pdata->set_charger;
+ dev_set_drvdata(&pdev->dev, info);
+ platform_set_drvdata(pdev, info);
+
+ max8925_init_charger(chip, info);
+ return 0;
+out_battery:
+ power_supply_unregister(&info->battery);
+out_usb:
+ power_supply_unregister(&info->ac);
+out:
+ kfree(info);
+ return ret;
+}
+
+static __devexit int max8925_power_remove(struct platform_device *pdev)
+{
+ struct max8925_power_info *info = platform_get_drvdata(pdev);
+
+ if (info) {
+ power_supply_unregister(&info->ac);
+ power_supply_unregister(&info->usb);
+ power_supply_unregister(&info->battery);
+ max8925_deinit_charger(info);
+ kfree(info);
+ }
+ return 0;
+}
+
+static struct platform_driver max8925_power_driver = {
+ .probe = max8925_power_probe,
+ .remove = __devexit_p(max8925_power_remove),
+ .driver = {
+ .name = "max8925-power",
+ },
+};
+
+static int __init max8925_power_init(void)
+{
+ return platform_driver_register(&max8925_power_driver);
+}
+module_init(max8925_power_init);
+
+static void __exit max8925_power_exit(void)
+{
+ platform_driver_unregister(&max8925_power_driver);
+}
+module_exit(max8925_power_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Power supply driver for MAX8925");
+MODULE_ALIAS("platform:max8925-power");
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index c790e0c..ff05e61 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -99,6 +99,7 @@ static struct device_attribute power_supply_attrs[] = {
POWER_SUPPLY_ATTR(present),
POWER_SUPPLY_ATTR(online),
POWER_SUPPLY_ATTR(technology),
+ POWER_SUPPLY_ATTR(cycle_count),
POWER_SUPPLY_ATTR(voltage_max),
POWER_SUPPLY_ATTR(voltage_min),
POWER_SUPPLY_ATTR(voltage_max_design),
diff --git a/drivers/power/wm8350_power.c b/drivers/power/wm8350_power.c
index ad4f071..0693902 100644
--- a/drivers/power/wm8350_power.c
+++ b/drivers/power/wm8350_power.c
@@ -190,7 +190,7 @@ static irqreturn_t wm8350_charger_handler(int irq, void *data)
struct wm8350_power *power = &wm8350->power;
struct wm8350_charger_policy *policy = power->policy;
- switch (irq) {
+ switch (irq - wm8350->irq_base) {
case WM8350_IRQ_CHG_BAT_FAIL:
dev_err(wm8350->dev, "battery failed\n");
break;
@@ -428,18 +428,18 @@ static void wm8350_init_charger(struct wm8350 *wm8350)
static void free_charger_irq(struct wm8350 *wm8350)
{
- wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT);
- wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD);
- wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL);
- wm8350_free_irq(wm8350, WM8350_IRQ_CHG_TO);
- wm8350_free_irq(wm8350, WM8350_IRQ_CHG_END);
- wm8350_free_irq(wm8350, WM8350_IRQ_CHG_START);
- wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9);
- wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1);
- wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85);
- wm8350_free_irq(wm8350, WM8350_IRQ_EXT_USB_FB);
- wm8350_free_irq(wm8350, WM8350_IRQ_EXT_WALL_FB);
- wm8350_free_irq(wm8350, WM8350_IRQ_EXT_BAT_FB);
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_TO, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_END, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_START, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_EXT_USB_FB, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_EXT_WALL_FB, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_EXT_BAT_FB, wm8350);
}
static __devinit int wm8350_power_probe(struct platform_device *pdev)
diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c
index 6ea3cb5..23eed35 100644
--- a/drivers/power/wm97xx_battery.c
+++ b/drivers/power/wm97xx_battery.c
@@ -26,7 +26,7 @@
static DEFINE_MUTEX(bat_lock);
static struct work_struct bat_work;
-struct mutex work_lock;
+static struct mutex work_lock;
static int bat_status = POWER_SUPPLY_STATUS_UNKNOWN;
static struct wm97xx_batt_info *gpdata;
static enum power_supply_property *prop;
@@ -203,7 +203,7 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev)
goto err2;
ret = request_irq(gpio_to_irq(pdata->charge_gpio),
wm97xx_chrg_irq, IRQF_DISABLED,
- "AC Detect", 0);
+ "AC Detect", dev);
if (ret)
goto err2;
props++; /* POWER_SUPPLY_PROP_STATUS */
OpenPOWER on IntegriCloud