diff options
Diffstat (limited to 'drivers/power/supply/Kconfig')
| -rw-r--r-- | drivers/power/supply/Kconfig | 514 |
1 files changed, 514 insertions, 0 deletions
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig new file mode 100644 index 0000000..76806a0 --- /dev/null +++ b/drivers/power/supply/Kconfig @@ -0,0 +1,514 @@ +menuconfig POWER_SUPPLY + bool "Power supply class support" + help + Say Y here to enable power supply class support. This allows + power supply (batteries, AC, USB) monitoring by userspace + via sysfs and uevent (if available) and/or APM kernel interface + (if selected below). + +if POWER_SUPPLY + +config POWER_SUPPLY_DEBUG + bool "Power supply debug" + help + Say Y here to enable debugging messages for power supply class + and drivers. + +config PDA_POWER + tristate "Generic PDA/phone power driver" + depends on !S390 + help + Say Y here to enable generic power driver for PDAs and phones with + one or two external power supplies (AC/USB) connected to main and + backup batteries, and optional builtin charger. + +config APM_POWER + tristate "APM emulation for class batteries" + depends on APM_EMULATION + help + Say Y here to enable support APM status emulation using + battery class devices. + +config GENERIC_ADC_BATTERY + tristate "Generic battery support using IIO" + depends on IIO + help + Say Y here to enable support for the generic battery driver + which uses IIO framework to read adc. + +config MAX8925_POWER + tristate "MAX8925 battery charger support" + depends on MFD_MAX8925 + help + Say Y here to enable support for the battery charger in the Maxim + MAX8925 PMIC. + +config WM831X_BACKUP + tristate "WM831X backup battery charger support" + depends on MFD_WM831X + help + Say Y here to enable support for the backup battery charger + in the Wolfson Microelectronics WM831x PMICs. + +config WM831X_POWER + tristate "WM831X PMU support" + depends on MFD_WM831X + help + Say Y here to enable support for the power management unit + provided by Wolfson Microelectronics WM831x PMICs. + +config WM8350_POWER + tristate "WM8350 PMU support" + depends on MFD_WM8350 + help + Say Y here to enable support for the power management unit + provided by the Wolfson Microelectronics WM8350 PMIC. + +config TEST_POWER + tristate "Test power driver" + help + This driver is used for testing. It's safe to say M here. + +config BATTERY_88PM860X + tristate "Marvell 88PM860x battery driver" + depends on MFD_88PM860X + help + Say Y here to enable battery monitor for Marvell 88PM860x chip. + +config BATTERY_ACT8945A + tristate "Active-semi ACT8945A charger driver" + depends on MFD_ACT8945A || COMPILE_TEST + help + Say Y here to enable support for power supply provided by + Active-semi ActivePath ACT8945A charger. + +config BATTERY_DS2760 + tristate "DS2760 battery driver (HP iPAQ & others)" + depends on W1 && W1_SLAVE_DS2760 + help + Say Y here to enable support for batteries with ds2760 chip. + +config BATTERY_DS2780 + tristate "DS2780 battery driver" + depends on HAS_IOMEM + select W1 + select W1_SLAVE_DS2780 + help + Say Y here to enable support for batteries with ds2780 chip. + +config BATTERY_DS2781 + tristate "DS2781 battery driver" + depends on HAS_IOMEM + select W1 + select W1_SLAVE_DS2781 + help + If you enable this you will have the DS2781 battery driver support. + + The battery monitor chip is used in many batteries/devices + as the one who is responsible for charging/discharging/monitoring + Li+ batteries. + + If you are unsure, say N. + +config BATTERY_DS2782 + tristate "DS2782/DS2786 standalone gas-gauge" + depends on I2C + help + Say Y here to enable support for the DS2782/DS2786 standalone battery + gas-gauge. + +config BATTERY_PMU + tristate "Apple PMU battery" + depends on PPC32 && ADB_PMU + help + Say Y here to expose battery information on Apple machines + through the generic battery class. + +config BATTERY_OLPC + tristate "One Laptop Per Child battery" + depends on X86_32 && OLPC + help + Say Y to enable support for the battery on the OLPC laptop. + +config BATTERY_TOSA + tristate "Sharp SL-6000 (tosa) battery" + depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX + help + Say Y to enable support for the battery on the Sharp Zaurus + SL-6000 (tosa) models. + +config BATTERY_COLLIE + tristate "Sharp SL-5500 (collie) battery" + depends on SA1100_COLLIE && MCP_UCB1200 + help + Say Y to enable support for the battery on the Sharp Zaurus + SL-5500 (collie) models. + +config BATTERY_IPAQ_MICRO + tristate "iPAQ Atmel Micro ASIC battery driver" + depends on MFD_IPAQ_MICRO + help + Choose this option if you want to monitor battery status on + Compaq/HP iPAQ h3100 and h3600. + +config BATTERY_WM97XX + bool "WM97xx generic battery driver" + depends on TOUCHSCREEN_WM97XX=y + help + Say Y to enable support for battery measured by WM97xx aux port. + +config BATTERY_SBS + tristate "SBS Compliant gas gauge" + depends on I2C + help + Say Y to include support for SBS battery driver for SBS-compliant + gas gauges. + +config BATTERY_BQ27XXX + tristate "BQ27xxx battery driver" + help + Say Y here to enable support for batteries with BQ27xxx chips. + +config BATTERY_BQ27XXX_I2C + tristate "BQ27xxx I2C support" + depends on BATTERY_BQ27XXX + depends on I2C + default y + help + Say Y here to enable support for batteries with BQ27xxx chips + connected over an I2C bus. + +config BATTERY_DA9030 + tristate "DA9030 battery driver" + depends on PMIC_DA903X + help + Say Y here to enable support for batteries charger integrated into + DA9030 PMIC. + +config BATTERY_DA9052 + tristate "Dialog DA9052 Battery" + depends on PMIC_DA9052 + help + Say Y here to enable support for batteries charger integrated into + DA9052 PMIC. + +config CHARGER_DA9150 + tristate "Dialog Semiconductor DA9150 Charger support" + depends on MFD_DA9150 + depends on DA9150_GPADC + depends on IIO + help + Say Y here to enable support for charger unit of the DA9150 + Integrated Charger & Fuel-Gauge IC. + + This driver can also be built as a module. If so, the module will be + called da9150-charger. + +config BATTERY_DA9150 + tristate "Dialog Semiconductor DA9150 Fuel Gauge support" + depends on MFD_DA9150 + help + Say Y here to enable support for the Fuel-Gauge unit of the DA9150 + Integrated Charger & Fuel-Gauge IC + + This driver can also be built as a module. If so, the module will be + called da9150-fg. + +config AXP288_CHARGER + tristate "X-Powers AXP288 Charger" + depends on MFD_AXP20X && EXTCON_AXP288 + help + Say yes here to have support X-Power AXP288 power management IC (PMIC) + integrated charger. + +config AXP288_FUEL_GAUGE + tristate "X-Powers AXP288 Fuel Gauge" + depends on MFD_AXP20X && IIO + help + Say yes here to have support for X-Power power management IC (PMIC) + Fuel Gauge. The device provides battery statistics and status + monitoring as well as alerts for battery over/under voltage and + over/under temperature. + +config BATTERY_MAX17040 + tristate "Maxim MAX17040 Fuel Gauge" + depends on I2C + help + MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries + in handheld and portable equipment. The MAX17040 is configured + to operate with a single lithium cell + +config BATTERY_MAX17042 + tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge" + depends on I2C + select REGMAP_I2C + help + MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries + in handheld and portable equipment. The MAX17042 is configured + to operate with a single lithium cell. MAX8997 and MAX8966 are + multi-function devices that include fuel gauages that are compatible + with MAX17042. This driver also supports max17047/50 chips which are + improved version of max17042. + +config BATTERY_Z2 + tristate "Z2 battery driver" + depends on I2C && MACH_ZIPIT2 + help + Say Y to include support for the battery on the Zipit Z2. + +config BATTERY_S3C_ADC + tristate "Battery driver for Samsung ADC based monitoring" + depends on S3C_ADC + help + Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery + +config BATTERY_TWL4030_MADC + tristate "TWL4030 MADC battery driver" + depends on TWL4030_MADC + help + Say Y here to enable this dumb driver for batteries managed + through the TWL4030 MADC. + +config CHARGER_88PM860X + tristate "Marvell 88PM860x Charger driver" + depends on MFD_88PM860X && BATTERY_88PM860X + help + Say Y here to enable charger for Marvell 88PM860x chip. + +config CHARGER_PCF50633 + tristate "NXP PCF50633 MBC" + depends on MFD_PCF50633 + help + Say Y to include support for NXP PCF50633 Main Battery Charger. + +config BATTERY_JZ4740 + tristate "Ingenic JZ4740 battery" + depends on MACH_JZ4740 + depends on MFD_JZ4740_ADC + help + Say Y to enable support for the battery on Ingenic JZ4740 based + boards. + + This driver can be build as a module. If so, the module will be + called jz4740-battery. + +config BATTERY_INTEL_MID + tristate "Battery driver for Intel MID platforms" + depends on INTEL_SCU_IPC && SPI + help + Say Y here to enable the battery driver on Intel MID + platforms. + +config BATTERY_RX51 + tristate "Nokia RX-51 (N900) battery driver" + depends on TWL4030_MADC + help + Say Y here to enable support for battery information on Nokia + RX-51, also known as N900 tablet. + +config CHARGER_ISP1704 + tristate "ISP1704 USB Charger Detection" + depends on USB_PHY + depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y' + help + Say Y to enable support for USB Charger Detection with + ISP1707/ISP1704 USB transceivers. + +config CHARGER_MAX8903 + tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power" + help + Say Y to enable support for the MAX8903 DC-DC charger and sysfs. + The driver supports controlling charger-enable and current-limit + pins based on the status of charger connections with interrupt + handlers. + +config CHARGER_TWL4030 + tristate "OMAP TWL4030 BCI charger driver" + depends on IIO && TWL4030_CORE + help + Say Y here to enable support for TWL4030 Battery Charge Interface. + +config CHARGER_LP8727 + tristate "TI/National Semiconductor LP8727 charger driver" + depends on I2C + help + Say Y here to enable support for LP8727 Charger Driver. + +config CHARGER_LP8788 + tristate "TI LP8788 charger driver" + depends on MFD_LP8788 + depends on LP8788_ADC + depends on IIO + help + Say Y to enable support for the LP8788 linear charger. + +config CHARGER_GPIO + tristate "GPIO charger" + depends on GPIOLIB || COMPILE_TEST + help + Say Y to include support for chargers which report their online status + through a GPIO pin. + + This driver can be build as a module. If so, the module will be + called gpio-charger. + +config CHARGER_MANAGER + bool "Battery charger manager for multiple chargers" + depends on REGULATOR + select EXTCON + help + Say Y to enable charger-manager support, which allows multiple + chargers attached to a battery and multiple batteries attached to a + system. The charger-manager also can monitor charging status in + runtime and in suspend-to-RAM by waking up the system periodically + with help of suspend_again support. + +config CHARGER_MAX14577 + tristate "Maxim MAX14577/77836 battery charger driver" + depends on MFD_MAX14577 + help + Say Y to enable support for the battery charger control sysfs and + platform data of MAX14577/77836 MUICs. + +config CHARGER_MAX77693 + tristate "Maxim MAX77693 battery charger driver" + depends on MFD_MAX77693 + help + Say Y to enable support for the Maxim MAX77693 battery charger. + +config CHARGER_MAX8997 + tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver" + depends on MFD_MAX8997 && REGULATOR_MAX8997 + help + Say Y to enable support for the battery charger control sysfs and + platform data of MAX8997/LP3974 PMICs. + +config CHARGER_MAX8998 + tristate "Maxim MAX8998/LP3974 PMIC battery charger driver" + depends on MFD_MAX8998 && REGULATOR_MAX8998 + help + Say Y to enable support for the battery charger control sysfs and + platform data of MAX8998/LP3974 PMICs. + +config CHARGER_QCOM_SMBB + tristate "Qualcomm Switch-Mode Battery Charger and Boost" + depends on MFD_SPMI_PMIC || COMPILE_TEST + depends on OF + depends on EXTCON + help + Say Y to include support for the Switch-Mode Battery Charger and + Boost (SMBB) hardware found in Qualcomm PM8941 PMICs. The charger + is an integrated, single-cell lithium-ion battery charger. DT + configuration is required for loading, see the devicetree + documentation for more detail. The base name for this driver is + 'pm8941_charger'. + +config CHARGER_BQ2415X + tristate "TI BQ2415x battery charger driver" + depends on I2C + help + Say Y to enable support for the TI BQ2415x battery charger + PMICs. + + You'll need this driver to charge batteries on e.g. Nokia + RX-51/N900. + +config CHARGER_BQ24190 + tristate "TI BQ24190 battery charger driver" + depends on I2C + depends on GPIOLIB || COMPILE_TEST + help + Say Y to enable support for the TI BQ24190 battery charger. + +config CHARGER_BQ24257 + tristate "TI BQ24250/24251/24257 battery charger driver" + depends on I2C + depends on GPIOLIB || COMPILE_TEST + depends on REGMAP_I2C + help + Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery + chargers. + +config CHARGER_BQ24735 + tristate "TI BQ24735 battery charger support" + depends on I2C + depends on GPIOLIB || COMPILE_TEST + help + Say Y to enable support for the TI BQ24735 battery charger. + +config CHARGER_BQ25890 + tristate "TI BQ25890 battery charger driver" + depends on I2C + depends on GPIOLIB || COMPILE_TEST + select REGMAP_I2C + help + Say Y to enable support for the TI BQ25890 battery charger. + +config CHARGER_SMB347 + tristate "Summit Microelectronics SMB347 Battery Charger" + depends on I2C + select REGMAP_I2C + help + Say Y to include support for Summit Microelectronics SMB347 + Battery Charger. + +config CHARGER_TPS65090 + tristate "TPS65090 battery charger driver" + depends on MFD_TPS65090 + help + Say Y here to enable support for battery charging with TPS65090 + PMIC chips. + +config CHARGER_TPS65217 + tristate "TPS65217 battery charger driver" + depends on MFD_TPS65217 + help + Say Y here to enable support for battery charging with TPS65217 + PMIC chips. + +config BATTERY_GAUGE_LTC2941 + tristate "LTC2941/LTC2943 Battery Gauge Driver" + depends on I2C + help + Say Y here to include support for LTC2941 and LTC2943 Battery + Gauge IC. The driver reports the charge count continuously, and + measures the voltage and temperature every 10 seconds. + +config AB8500_BM + bool "AB8500 Battery Management Driver" + depends on AB8500_CORE && AB8500_GPADC + help + Say Y to include support for AB8500 battery management. + +config BATTERY_GOLDFISH + tristate "Goldfish battery driver" + depends on GOLDFISH || COMPILE_TEST + depends on HAS_IOMEM + help + Say Y to enable support for the battery and AC power in the + Goldfish emulator. + +config BATTERY_RT5033 + tristate "RT5033 fuel gauge support" + depends on MFD_RT5033 + help + This adds support for battery fuel gauge in Richtek RT5033 PMIC. + The fuelgauge calculates and determines the battery state of charge + according to battery open circuit voltage. + +config CHARGER_RT9455 + tristate "Richtek RT9455 battery charger driver" + depends on I2C + depends on GPIOLIB || COMPILE_TEST + select REGMAP_I2C + help + Say Y to enable support for Richtek RT9455 battery charger. + +config AXP20X_POWER + tristate "AXP20x power supply driver" + depends on MFD_AXP20X + help + This driver provides support for the power supply features of + AXP20x PMIC. + +endif # POWER_SUPPLY |
