diff options
Diffstat (limited to 'drivers/power/Kconfig')
| -rw-r--r-- | drivers/power/Kconfig | 518 |
1 files changed, 2 insertions, 516 deletions
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index acd4a15..63454b5 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -1,517 +1,3 @@ -menuconfig POWER_SUPPLY - bool "Power supply class support" - help - Say Y here to enable power supply class support. This allows - power supply (batteries, AC, USB) monitoring by userspace - via sysfs and uevent (if available) and/or APM kernel interface - (if selected below). - -if POWER_SUPPLY - -config POWER_SUPPLY_DEBUG - bool "Power supply debug" - help - Say Y here to enable debugging messages for power supply class - and drivers. - -config PDA_POWER - tristate "Generic PDA/phone power driver" - depends on !S390 - help - Say Y here to enable generic power driver for PDAs and phones with - one or two external power supplies (AC/USB) connected to main and - backup batteries, and optional builtin charger. - -config APM_POWER - tristate "APM emulation for class batteries" - depends on APM_EMULATION - help - Say Y here to enable support APM status emulation using - battery class devices. - -config GENERIC_ADC_BATTERY - tristate "Generic battery support using IIO" - depends on IIO - help - Say Y here to enable support for the generic battery driver - which uses IIO framework to read adc. - -config MAX8925_POWER - tristate "MAX8925 battery charger support" - depends on MFD_MAX8925 - help - Say Y here to enable support for the battery charger in the Maxim - MAX8925 PMIC. - -config WM831X_BACKUP - tristate "WM831X backup battery charger support" - depends on MFD_WM831X - help - Say Y here to enable support for the backup battery charger - in the Wolfson Microelectronics WM831x PMICs. - -config WM831X_POWER - tristate "WM831X PMU support" - depends on MFD_WM831X - help - Say Y here to enable support for the power management unit - provided by Wolfson Microelectronics WM831x PMICs. - -config WM8350_POWER - tristate "WM8350 PMU support" - depends on MFD_WM8350 - help - Say Y here to enable support for the power management unit - provided by the Wolfson Microelectronics WM8350 PMIC. - -config TEST_POWER - tristate "Test power driver" - help - This driver is used for testing. It's safe to say M here. - -config BATTERY_88PM860X - tristate "Marvell 88PM860x battery driver" - depends on MFD_88PM860X - help - Say Y here to enable battery monitor for Marvell 88PM860x chip. - -config BATTERY_ACT8945A - tristate "Active-semi ACT8945A charger driver" - depends on MFD_ACT8945A || COMPILE_TEST - help - Say Y here to enable support for power supply provided by - Active-semi ActivePath ACT8945A charger. - -config BATTERY_DS2760 - tristate "DS2760 battery driver (HP iPAQ & others)" - depends on W1 && W1_SLAVE_DS2760 - help - Say Y here to enable support for batteries with ds2760 chip. - -config BATTERY_DS2780 - tristate "DS2780 battery driver" - depends on HAS_IOMEM - select W1 - select W1_SLAVE_DS2780 - help - Say Y here to enable support for batteries with ds2780 chip. - -config BATTERY_DS2781 - tristate "DS2781 battery driver" - depends on HAS_IOMEM - select W1 - select W1_SLAVE_DS2781 - help - If you enable this you will have the DS2781 battery driver support. - - The battery monitor chip is used in many batteries/devices - as the one who is responsible for charging/discharging/monitoring - Li+ batteries. - - If you are unsure, say N. - -config BATTERY_DS2782 - tristate "DS2782/DS2786 standalone gas-gauge" - depends on I2C - help - Say Y here to enable support for the DS2782/DS2786 standalone battery - gas-gauge. - -config BATTERY_PMU - tristate "Apple PMU battery" - depends on PPC32 && ADB_PMU - help - Say Y here to expose battery information on Apple machines - through the generic battery class. - -config BATTERY_OLPC - tristate "One Laptop Per Child battery" - depends on X86_32 && OLPC - help - Say Y to enable support for the battery on the OLPC laptop. - -config BATTERY_TOSA - tristate "Sharp SL-6000 (tosa) battery" - depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX - help - Say Y to enable support for the battery on the Sharp Zaurus - SL-6000 (tosa) models. - -config BATTERY_COLLIE - tristate "Sharp SL-5500 (collie) battery" - depends on SA1100_COLLIE && MCP_UCB1200 - help - Say Y to enable support for the battery on the Sharp Zaurus - SL-5500 (collie) models. - -config BATTERY_IPAQ_MICRO - tristate "iPAQ Atmel Micro ASIC battery driver" - depends on MFD_IPAQ_MICRO - help - Choose this option if you want to monitor battery status on - Compaq/HP iPAQ h3100 and h3600. - -config BATTERY_WM97XX - bool "WM97xx generic battery driver" - depends on TOUCHSCREEN_WM97XX=y - help - Say Y to enable support for battery measured by WM97xx aux port. - -config BATTERY_SBS - tristate "SBS Compliant gas gauge" - depends on I2C - help - Say Y to include support for SBS battery driver for SBS-compliant - gas gauges. - -config BATTERY_BQ27XXX - tristate "BQ27xxx battery driver" - help - Say Y here to enable support for batteries with BQ27xxx chips. - -config BATTERY_BQ27XXX_I2C - tristate "BQ27xxx I2C support" - depends on BATTERY_BQ27XXX - depends on I2C - default y - help - Say Y here to enable support for batteries with BQ27xxx chips - connected over an I2C bus. - -config BATTERY_DA9030 - tristate "DA9030 battery driver" - depends on PMIC_DA903X - help - Say Y here to enable support for batteries charger integrated into - DA9030 PMIC. - -config BATTERY_DA9052 - tristate "Dialog DA9052 Battery" - depends on PMIC_DA9052 - help - Say Y here to enable support for batteries charger integrated into - DA9052 PMIC. - -config CHARGER_DA9150 - tristate "Dialog Semiconductor DA9150 Charger support" - depends on MFD_DA9150 - depends on DA9150_GPADC - depends on IIO - help - Say Y here to enable support for charger unit of the DA9150 - Integrated Charger & Fuel-Gauge IC. - - This driver can also be built as a module. If so, the module will be - called da9150-charger. - -config BATTERY_DA9150 - tristate "Dialog Semiconductor DA9150 Fuel Gauge support" - depends on MFD_DA9150 - help - Say Y here to enable support for the Fuel-Gauge unit of the DA9150 - Integrated Charger & Fuel-Gauge IC - - This driver can also be built as a module. If so, the module will be - called da9150-fg. - -config AXP288_CHARGER - tristate "X-Powers AXP288 Charger" - depends on MFD_AXP20X && EXTCON_AXP288 - help - Say yes here to have support X-Power AXP288 power management IC (PMIC) - integrated charger. - -config AXP288_FUEL_GAUGE - tristate "X-Powers AXP288 Fuel Gauge" - depends on MFD_AXP20X && IIO - help - Say yes here to have support for X-Power power management IC (PMIC) - Fuel Gauge. The device provides battery statistics and status - monitoring as well as alerts for battery over/under voltage and - over/under temperature. - -config BATTERY_MAX17040 - tristate "Maxim MAX17040 Fuel Gauge" - depends on I2C - help - MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries - in handheld and portable equipment. The MAX17040 is configured - to operate with a single lithium cell - -config BATTERY_MAX17042 - tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge" - depends on I2C - select REGMAP_I2C - help - MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries - in handheld and portable equipment. The MAX17042 is configured - to operate with a single lithium cell. MAX8997 and MAX8966 are - multi-function devices that include fuel gauages that are compatible - with MAX17042. This driver also supports max17047/50 chips which are - improved version of max17042. - -config BATTERY_Z2 - tristate "Z2 battery driver" - depends on I2C && MACH_ZIPIT2 - help - Say Y to include support for the battery on the Zipit Z2. - -config BATTERY_S3C_ADC - tristate "Battery driver for Samsung ADC based monitoring" - depends on S3C_ADC - help - Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery - -config BATTERY_TWL4030_MADC - tristate "TWL4030 MADC battery driver" - depends on TWL4030_MADC - help - Say Y here to enable this dumb driver for batteries managed - through the TWL4030 MADC. - -config CHARGER_88PM860X - tristate "Marvell 88PM860x Charger driver" - depends on MFD_88PM860X && BATTERY_88PM860X - help - Say Y here to enable charger for Marvell 88PM860x chip. - -config CHARGER_PCF50633 - tristate "NXP PCF50633 MBC" - depends on MFD_PCF50633 - help - Say Y to include support for NXP PCF50633 Main Battery Charger. - -config BATTERY_JZ4740 - tristate "Ingenic JZ4740 battery" - depends on MACH_JZ4740 - depends on MFD_JZ4740_ADC - help - Say Y to enable support for the battery on Ingenic JZ4740 based - boards. - - This driver can be build as a module. If so, the module will be - called jz4740-battery. - -config BATTERY_INTEL_MID - tristate "Battery driver for Intel MID platforms" - depends on INTEL_SCU_IPC && SPI - help - Say Y here to enable the battery driver on Intel MID - platforms. - -config BATTERY_RX51 - tristate "Nokia RX-51 (N900) battery driver" - depends on TWL4030_MADC - help - Say Y here to enable support for battery information on Nokia - RX-51, also known as N900 tablet. - -config CHARGER_ISP1704 - tristate "ISP1704 USB Charger Detection" - depends on USB_PHY - depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y' - help - Say Y to enable support for USB Charger Detection with - ISP1707/ISP1704 USB transceivers. - -config CHARGER_MAX8903 - tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power" - help - Say Y to enable support for the MAX8903 DC-DC charger and sysfs. - The driver supports controlling charger-enable and current-limit - pins based on the status of charger connections with interrupt - handlers. - -config CHARGER_TWL4030 - tristate "OMAP TWL4030 BCI charger driver" - depends on IIO && TWL4030_CORE - help - Say Y here to enable support for TWL4030 Battery Charge Interface. - -config CHARGER_LP8727 - tristate "TI/National Semiconductor LP8727 charger driver" - depends on I2C - help - Say Y here to enable support for LP8727 Charger Driver. - -config CHARGER_LP8788 - tristate "TI LP8788 charger driver" - depends on MFD_LP8788 - depends on LP8788_ADC - depends on IIO - help - Say Y to enable support for the LP8788 linear charger. - -config CHARGER_GPIO - tristate "GPIO charger" - depends on GPIOLIB || COMPILE_TEST - help - Say Y to include support for chargers which report their online status - through a GPIO pin. - - This driver can be build as a module. If so, the module will be - called gpio-charger. - -config CHARGER_MANAGER - bool "Battery charger manager for multiple chargers" - depends on REGULATOR - select EXTCON - help - Say Y to enable charger-manager support, which allows multiple - chargers attached to a battery and multiple batteries attached to a - system. The charger-manager also can monitor charging status in - runtime and in suspend-to-RAM by waking up the system periodically - with help of suspend_again support. - -config CHARGER_MAX14577 - tristate "Maxim MAX14577/77836 battery charger driver" - depends on MFD_MAX14577 - help - Say Y to enable support for the battery charger control sysfs and - platform data of MAX14577/77836 MUICs. - -config CHARGER_MAX77693 - tristate "Maxim MAX77693 battery charger driver" - depends on MFD_MAX77693 - help - Say Y to enable support for the Maxim MAX77693 battery charger. - -config CHARGER_MAX8997 - tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver" - depends on MFD_MAX8997 && REGULATOR_MAX8997 - help - Say Y to enable support for the battery charger control sysfs and - platform data of MAX8997/LP3974 PMICs. - -config CHARGER_MAX8998 - tristate "Maxim MAX8998/LP3974 PMIC battery charger driver" - depends on MFD_MAX8998 && REGULATOR_MAX8998 - help - Say Y to enable support for the battery charger control sysfs and - platform data of MAX8998/LP3974 PMICs. - -config CHARGER_QCOM_SMBB - tristate "Qualcomm Switch-Mode Battery Charger and Boost" - depends on MFD_SPMI_PMIC || COMPILE_TEST - depends on OF - depends on EXTCON - help - Say Y to include support for the Switch-Mode Battery Charger and - Boost (SMBB) hardware found in Qualcomm PM8941 PMICs. The charger - is an integrated, single-cell lithium-ion battery charger. DT - configuration is required for loading, see the devicetree - documentation for more detail. The base name for this driver is - 'pm8941_charger'. - -config CHARGER_BQ2415X - tristate "TI BQ2415x battery charger driver" - depends on I2C - help - Say Y to enable support for the TI BQ2415x battery charger - PMICs. - - You'll need this driver to charge batteries on e.g. Nokia - RX-51/N900. - -config CHARGER_BQ24190 - tristate "TI BQ24190 battery charger driver" - depends on I2C - depends on GPIOLIB || COMPILE_TEST - help - Say Y to enable support for the TI BQ24190 battery charger. - -config CHARGER_BQ24257 - tristate "TI BQ24250/24251/24257 battery charger driver" - depends on I2C - depends on GPIOLIB || COMPILE_TEST - depends on REGMAP_I2C - help - Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery - chargers. - -config CHARGER_BQ24735 - tristate "TI BQ24735 battery charger support" - depends on I2C - depends on GPIOLIB || COMPILE_TEST - help - Say Y to enable support for the TI BQ24735 battery charger. - -config CHARGER_BQ25890 - tristate "TI BQ25890 battery charger driver" - depends on I2C - depends on GPIOLIB || COMPILE_TEST - select REGMAP_I2C - help - Say Y to enable support for the TI BQ25890 battery charger. - -config CHARGER_SMB347 - tristate "Summit Microelectronics SMB347 Battery Charger" - depends on I2C - select REGMAP_I2C - help - Say Y to include support for Summit Microelectronics SMB347 - Battery Charger. - -config CHARGER_TPS65090 - tristate "TPS65090 battery charger driver" - depends on MFD_TPS65090 - help - Say Y here to enable support for battery charging with TPS65090 - PMIC chips. - -config CHARGER_TPS65217 - tristate "TPS65217 battery charger driver" - depends on MFD_TPS65217 - help - Say Y here to enable support for battery charging with TPS65217 - PMIC chips. - -config BATTERY_GAUGE_LTC2941 - tristate "LTC2941/LTC2943 Battery Gauge Driver" - depends on I2C - help - Say Y here to include support for LTC2941 and LTC2943 Battery - Gauge IC. The driver reports the charge count continuously, and - measures the voltage and temperature every 10 seconds. - -config AB8500_BM - bool "AB8500 Battery Management Driver" - depends on AB8500_CORE && AB8500_GPADC - help - Say Y to include support for AB8500 battery management. - -config BATTERY_GOLDFISH - tristate "Goldfish battery driver" - depends on GOLDFISH || COMPILE_TEST - depends on HAS_IOMEM - help - Say Y to enable support for the battery and AC power in the - Goldfish emulator. - -config BATTERY_RT5033 - tristate "RT5033 fuel gauge support" - depends on MFD_RT5033 - help - This adds support for battery fuel gauge in Richtek RT5033 PMIC. - The fuelgauge calculates and determines the battery state of charge - according to battery open circuit voltage. - -config CHARGER_RT9455 - tristate "Richtek RT9455 battery charger driver" - depends on I2C - depends on GPIOLIB || COMPILE_TEST - select REGMAP_I2C - help - Say Y to enable support for Richtek RT9455 battery charger. - -config AXP20X_POWER - tristate "AXP20x power supply driver" - depends on MFD_AXP20X - help - This driver provides support for the power supply features of - AXP20x PMIC. - -endif # POWER_SUPPLY - -source "drivers/power/reset/Kconfig" source "drivers/power/avs/Kconfig" +source "drivers/power/reset/Kconfig" +source "drivers/power/supply/Kconfig" |
