diff options
Diffstat (limited to 'drivers/platform/x86/asus-laptop.c')
| -rw-r--r-- | drivers/platform/x86/asus-laptop.c | 1266 |
1 files changed, 1266 insertions, 0 deletions
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c new file mode 100644 index 0000000..8fb8b35 --- /dev/null +++ b/drivers/platform/x86/asus-laptop.c @@ -0,0 +1,1266 @@ +/* + * asus-laptop.c - Asus Laptop Support + * + * + * Copyright (C) 2002-2005 Julien Lerouge, 2003-2006 Karol Kozimor + * Copyright (C) 2006-2007 Corentin Chary + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * + * The development page for this driver is located at + * http://sourceforge.net/projects/acpi4asus/ + * + * Credits: + * Pontus Fuchs - Helper functions, cleanup + * Johann Wiesner - Small compile fixes + * John Belmonte - ACPI code for Toshiba laptop was a good starting point. + * Eric Burghard - LED display support for W1N + * Josh Green - Light Sens support + * Thomas Tuttle - His first patch for led support was very helpfull + * Sam Lin - GPS support + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/err.h> +#include <linux/proc_fs.h> +#include <linux/backlight.h> +#include <linux/fb.h> +#include <linux/leds.h> +#include <linux/platform_device.h> +#include <acpi/acpi_drivers.h> +#include <acpi/acpi_bus.h> +#include <asm/uaccess.h> + +#define ASUS_LAPTOP_VERSION "0.42" + +#define ASUS_HOTK_NAME "Asus Laptop Support" +#define ASUS_HOTK_CLASS "hotkey" +#define ASUS_HOTK_DEVICE_NAME "Hotkey" +#define ASUS_HOTK_FILE "asus-laptop" +#define ASUS_HOTK_PREFIX "\\_SB.ATKD." + +/* + * Some events we use, same for all Asus + */ +#define ATKD_BR_UP 0x10 +#define ATKD_BR_DOWN 0x20 +#define ATKD_LCD_ON 0x33 +#define ATKD_LCD_OFF 0x34 + +/* + * Known bits returned by \_SB.ATKD.HWRS + */ +#define WL_HWRS 0x80 +#define BT_HWRS 0x100 + +/* + * Flags for hotk status + * WL_ON and BT_ON are also used for wireless_status() + */ +#define WL_ON 0x01 //internal Wifi +#define BT_ON 0x02 //internal Bluetooth +#define MLED_ON 0x04 //mail LED +#define TLED_ON 0x08 //touchpad LED +#define RLED_ON 0x10 //Record LED +#define PLED_ON 0x20 //Phone LED +#define GLED_ON 0x40 //Gaming LED +#define LCD_ON 0x80 //LCD backlight +#define GPS_ON 0x100 //GPS + +#define ASUS_LOG ASUS_HOTK_FILE ": " +#define ASUS_ERR KERN_ERR ASUS_LOG +#define ASUS_WARNING KERN_WARNING ASUS_LOG +#define ASUS_NOTICE KERN_NOTICE ASUS_LOG +#define ASUS_INFO KERN_INFO ASUS_LOG +#define ASUS_DEBUG KERN_DEBUG ASUS_LOG + +MODULE_AUTHOR("Julien Lerouge, Karol Kozimor, Corentin Chary"); +MODULE_DESCRIPTION(ASUS_HOTK_NAME); +MODULE_LICENSE("GPL"); + +/* WAPF defines the behavior of the Fn+Fx wlan key + * The significance of values is yet to be found, but + * most of the time: + * 0x0 will do nothing + * 0x1 will allow to control the device with Fn+Fx key. + * 0x4 will send an ACPI event (0x88) while pressing the Fn+Fx key + * 0x5 like 0x1 or 0x4 + * So, if something doesn't work as you want, just try other values =) + */ +static uint wapf = 1; +module_param(wapf, uint, 0644); +MODULE_PARM_DESC(wapf, "WAPF value"); + +#define ASUS_HANDLE(object, paths...) \ + static acpi_handle object##_handle = NULL; \ + static char *object##_paths[] = { paths } + +/* LED */ +ASUS_HANDLE(mled_set, ASUS_HOTK_PREFIX "MLED"); +ASUS_HANDLE(tled_set, ASUS_HOTK_PREFIX "TLED"); +ASUS_HANDLE(rled_set, ASUS_HOTK_PREFIX "RLED"); /* W1JC */ +ASUS_HANDLE(pled_set, ASUS_HOTK_PREFIX "PLED"); /* A7J */ +ASUS_HANDLE(gled_set, ASUS_HOTK_PREFIX "GLED"); /* G1, G2 (probably) */ + +/* LEDD */ +ASUS_HANDLE(ledd_set, ASUS_HOTK_PREFIX "SLCM"); + +/* Bluetooth and WLAN + * WLED and BLED are not handled like other XLED, because in some dsdt + * they also control the WLAN/Bluetooth device. + */ +ASUS_HANDLE(wl_switch, ASUS_HOTK_PREFIX "WLED"); +ASUS_HANDLE(bt_switch, ASUS_HOTK_PREFIX "BLED"); +ASUS_HANDLE(wireless_status, ASUS_HOTK_PREFIX "RSTS"); /* All new models */ + +/* Brightness */ +ASUS_HANDLE(brightness_set, ASUS_HOTK_PREFIX "SPLV"); +ASUS_HANDLE(brightness_get, ASUS_HOTK_PREFIX "GPLV"); + +/* Backlight */ +ASUS_HANDLE(lcd_switch, "\\_SB.PCI0.SBRG.EC0._Q10", /* All new models */ + "\\_SB.PCI0.ISA.EC0._Q10", /* A1x */ + "\\_SB.PCI0.PX40.ECD0._Q10", /* L3C */ + "\\_SB.PCI0.PX40.EC0.Q10", /* M1A */ + "\\_SB.PCI0.LPCB.EC0._Q10", /* P30 */ + "\\_SB.PCI0.LPCB.EC0._Q0E", /* P30/P35 */ + "\\_SB.PCI0.PX40.Q10", /* S1x */ + "\\Q10"); /* A2x, L2D, L3D, M2E */ + +/* Display */ +ASUS_HANDLE(display_set, ASUS_HOTK_PREFIX "SDSP"); +ASUS_HANDLE(display_get, "\\_SB.PCI0.P0P1.VGA.GETD", /* A6B, A6K A6R A7D F3JM L4R M6R A3G + M6A M6V VX-1 V6J V6V W3Z */ + "\\_SB.PCI0.P0P2.VGA.GETD", /* A3E A4K, A4D A4L A6J A7J A8J Z71V M9V + S5A M5A z33A W1Jc W2V G1 */ + "\\_SB.PCI0.P0P3.VGA.GETD", /* A6V A6Q */ + "\\_SB.PCI0.P0PA.VGA.GETD", /* A6T, A6M */ + "\\_SB.PCI0.PCI1.VGAC.NMAP", /* L3C */ + "\\_SB.PCI0.VGA.GETD", /* Z96F */ + "\\ACTD", /* A2D */ + "\\ADVG", /* A4G Z71A W1N W5A W5F M2N M3N M5N M6N S1N S5N */ + "\\DNXT", /* P30 */ + "\\INFB", /* A2H D1 L2D L3D L3H L2E L5D L5C M1A M2E L4L W3V */ + "\\SSTE"); /* A3F A6F A3N A3L M6N W3N W6A */ + +ASUS_HANDLE(ls_switch, ASUS_HOTK_PREFIX "ALSC"); /* Z71A Z71V */ +ASUS_HANDLE(ls_level, ASUS_HOTK_PREFIX "ALSL"); /* Z71A Z71V */ + +/* GPS */ +/* R2H use different handle for GPS on/off */ +ASUS_HANDLE(gps_on, ASUS_HOTK_PREFIX "SDON"); /* R2H */ +ASUS_HANDLE(gps_off, ASUS_HOTK_PREFIX "SDOF"); /* R2H */ +ASUS_HANDLE(gps_status, ASUS_HOTK_PREFIX "GPST"); + +/* + * This is the main structure, we can use it to store anything interesting + * about the hotk device + */ +struct asus_hotk { + char *name; //laptop name + struct acpi_device *device; //the device we are in + acpi_handle handle; //the handle of the hotk device + char status; //status of the hotk, for LEDs, ... + u32 ledd_status; //status of the LED display + u8 light_level; //light sensor level + u8 light_switch; //light sensor switch value + u16 event_count[128]; //count for each event TODO make this better +}; + +/* + * This header is made available to allow proper configuration given model, + * revision number , ... this info cannot go in struct asus_hotk because it is + * available before the hotk + */ +static struct acpi_table_header *asus_info; + +/* The actual device the driver binds to */ +static struct asus_hotk *hotk; + +/* + * The hotkey driver declaration + */ +static const struct acpi_device_id asus_device_ids[] = { + {"ATK0100", 0}, + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, asus_device_ids); + +static int asus_hotk_add(struct acpi_device *device); +static int asus_hotk_remove(struct acpi_device *device, int type); +static struct acpi_driver asus_hotk_driver = { + .name = ASUS_HOTK_NAME, + .class = ASUS_HOTK_CLASS, + .ids = asus_device_ids, + .ops = { + .add = asus_hotk_add, + .remove = asus_hotk_remove, + }, +}; + +/* The backlight device /sys/class/backlight */ +static struct backlight_device *asus_backlight_device; + +/* + * The backlight class declaration + */ +static int read_brightness(struct backlight_device *bd); +static int update_bl_status(struct backlight_device *bd); +static struct backlight_ops asusbl_ops = { + .get_brightness = read_brightness, + .update_status = update_bl_status, +}; + +/* These functions actually update the LED's, and are called from a + * workqueue. By doing this as separate work rather than when the LED + * subsystem asks, we avoid messing with the Asus ACPI stuff during a + * potentially bad time, such as a timer interrupt. */ +static struct workqueue_struct *led_workqueue; + +#define ASUS_LED(object, ledname) \ + static void object##_led_set(struct led_classdev *led_cdev, \ + enum led_brightness value); \ + static void object##_led_update(struct work_struct *ignored); \ + static int object##_led_wk; \ + static DECLARE_WORK(object##_led_work, object##_led_update); \ + static struct led_classdev object##_led = { \ + .name = "asus::" ledname, \ + .brightness_set = object##_led_set, \ + } + +ASUS_LED(mled, "mail"); +ASUS_LED(tled, "touchpad"); +ASUS_LED(rled, "record"); +ASUS_LED(pled, "phone"); +ASUS_LED(gled, "gaming"); + +/* + * This function evaluates an ACPI method, given an int as parameter, the + * method is searched within the scope of the handle, can be NULL. The output + * of the method is written is output, which can also be NULL + * + * returns 0 if write is successful, -1 else. + */ +static int write_acpi_int(acpi_handle handle, const char *method, int val, + struct acpi_buffer *output) +{ + struct acpi_object_list params; //list of input parameters (an int here) + union acpi_object in_obj; //the only param we use + acpi_status status; + + if (!handle) + return 0; + + params.count = 1; + params.pointer = &in_obj; + in_obj.type = ACPI_TYPE_INTEGER; + in_obj.integer.value = val; + + status = acpi_evaluate_object(handle, (char *)method, ¶ms, output); + if (status == AE_OK) + return 0; + else + return -1; +} + +static int read_wireless_status(int mask) +{ + unsigned long long status; + acpi_status rv = AE_OK; + + if (!wireless_status_handle) + return (hotk->status & mask) ? 1 : 0; + + rv = acpi_evaluate_integer(wireless_status_handle, NULL, NULL, &status); + if (ACPI_FAILURE(rv)) + printk(ASUS_WARNING "Error reading Wireless status\n"); + else + return (status & mask) ? 1 : 0; + + return (hotk->status & mask) ? 1 : 0; +} + +static int read_gps_status(void) +{ + unsigned long long status; + acpi_status rv = AE_OK; + + rv = acpi_evaluate_integer(gps_status_handle, NULL, NULL, &status); + if (ACPI_FAILURE(rv)) + printk(ASUS_WARNING "Error reading GPS status\n"); + else + return status ? 1 : 0; + + return (hotk->status & GPS_ON) ? 1 : 0; +} + +/* Generic LED functions */ +static int read_status(int mask) +{ + /* There is a special method for both wireless devices */ + if (mask == BT_ON || mask == WL_ON) + return read_wireless_status(mask); + else if (mask == GPS_ON) + return read_gps_status(); + + return (hotk->status & mask) ? 1 : 0; +} + +static void write_status(acpi_handle handle, int out, int mask) +{ + hotk->status = (out) ? (hotk->status | mask) : (hotk->status & ~mask); + + switch (mask) { + case MLED_ON: + out = !(out & 0x1); + break; + case GLED_ON: + out = (out & 0x1) + 1; + break; + case GPS_ON: + handle = (out) ? gps_on_handle : gps_off_handle; + out = 0x02; + break; + default: + out &= 0x1; + break; + } + + if (write_acpi_int(handle, NULL, out, NULL)) + printk(ASUS_WARNING " write failed %x\n", mask); +} + +/* /sys/class/led handlers */ +#define ASUS_LED_HANDLER(object, mask) \ + static void object##_led_set(struct led_classdev *led_cdev, \ + enum led_brightness value) \ + { \ + object##_led_wk = (value > 0) ? 1 : 0; \ + queue_work(led_workqueue, &object##_led_work); \ + } \ + static void object##_led_update(struct work_struct *ignored) \ + { \ + int value = object##_led_wk; \ + write_status(object##_set_handle, value, (mask)); \ + } + +ASUS_LED_HANDLER(mled, MLED_ON); +ASUS_LED_HANDLER(pled, PLED_ON); +ASUS_LED_HANDLER(rled, RLED_ON); +ASUS_LED_HANDLER(tled, TLED_ON); +ASUS_LED_HANDLER(gled, GLED_ON); + +static int get_lcd_state(void) +{ + return read_status(LCD_ON); +} + +static int set_lcd_state(int value) +{ + int lcd = 0; + acpi_status status = 0; + + lcd = value ? 1 : 0; + + if (lcd == get_lcd_state()) + return 0; + + if (lcd_switch_handle) { + status = acpi_evaluate_object(lcd_switch_handle, + NULL, NULL, NULL); + + if (ACPI_FAILURE(status)) + printk(ASUS_WARNING "Error switching LCD\n"); + } + + write_status(NULL, lcd, LCD_ON); + return 0; +} + +static void lcd_blank(int blank) +{ + struct backlight_device *bd = asus_backlight_device; + + if (bd) { + bd->props.power = blank; + backlight_update_status(bd); + } +} + +static int read_brightness(struct backlight_device *bd) +{ + unsigned long long value; + acpi_status rv = AE_OK; + + rv = acpi_evaluate_integer(brightness_get_handle, NULL, NULL, &value); + if (ACPI_FAILURE(rv)) + printk(ASUS_WARNING "Error reading brightness\n"); + + return value; +} + +static int set_brightness(struct backlight_device *bd, int value) +{ + int ret = 0; + + value = (0 < value) ? ((15 < value) ? 15 : value) : 0; + /* 0 <= value <= 15 */ + + if (write_acpi_int(brightness_set_handle, NULL, value, NULL)) { + printk(ASUS_WARNING "Error changing brightness\n"); + ret = -EIO; + } + + return ret; +} + +static int update_bl_status(struct backlight_device *bd) +{ + int rv; + int value = bd->props.brightness; + + rv = set_brightness(bd, value); + if (rv) + return rv; + + value = (bd->props.power == FB_BLANK_UNBLANK) ? 1 : 0; + return set_lcd_state(value); +} + +/* + * Platform device handlers + */ + +/* + * We write our info in page, we begin at offset off and cannot write more + * than count bytes. We set eof to 1 if we handle those 2 values. We return the + * number of bytes written in page + */ +static ssize_t show_infos(struct device *dev, + struct device_attribute *attr, char *page) +{ + int len = 0; + unsigned long long temp; + char buf[16]; //enough for all info + acpi_status rv = AE_OK; + + /* + * We use the easy way, we don't care of off and count, so we don't set eof + * to 1 + */ + + len += sprintf(page, ASUS_HOTK_NAME " " ASUS_LAPTOP_VERSION "\n"); + len += sprintf(page + len, "Model reference : %s\n", hotk->name); + /* + * The SFUN method probably allows the original driver to get the list + * of features supported by a given model. For now, 0x0100 or 0x0800 + * bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card. + * The significance of others is yet to be found. + */ + rv = acpi_evaluate_integer(hotk->handle, "SFUN", NULL, &temp); + if (!ACPI_FAILURE(rv)) + len += sprintf(page + len, "SFUN value : 0x%04x\n", + (uint) temp); + /* + * Another value for userspace: the ASYM method returns 0x02 for + * battery low and 0x04 for battery critical, its readings tend to be + * more accurate than those provided by _BST. + * Note: since not all the laptops provide this method, errors are + * silently ignored. + */ + rv = acpi_evaluate_integer(hotk->handle, "ASYM", NULL, &temp); + if (!ACPI_FAILURE(rv)) + len += sprintf(page + len, "ASYM value : 0x%04x\n", + (uint) temp); + if (asus_info) { + snprintf(buf, 16, "%d", asus_info->length); + len += sprintf(page + len, "DSDT length : %s\n", buf); + snprintf(buf, 16, "%d", asus_info->checksum); + len += sprintf(page + len, "DSDT checksum : %s\n", buf); + snprintf(buf, 16, "%d", asus_info->revision); + len += sprintf(page + len, "DSDT revision : %s\n", buf); + snprintf(buf, 7, "%s", asus_info->oem_id); + len += sprintf(page + len, "OEM id : %s\n", buf); + snprintf(buf, 9, "%s", asus_info->oem_table_id); + len += sprintf(page + len, "OEM table id : %s\n", buf); + snprintf(buf, 16, "%x", asus_info->oem_revision); + len += sprintf(page + len, "OEM revision : 0x%s\n", buf); + snprintf(buf, 5, "%s", asus_info->asl_compiler_id); + len += sprintf(page + len, "ASL comp vendor id : %s\n", buf); + snprintf(buf, 16, "%x", asus_info->asl_compiler_revision); + len += sprintf(page + len, "ASL comp revision : 0x%s\n", buf); + } + + return len; +} + +static int parse_arg(const char *buf, unsigned long count, int *val) +{ + if (!count) + return 0; + if (count > 31) + return -EINVAL; + if (sscanf(buf, "%i", val) != 1) + return -EINVAL; + return count; +} + +static ssize_t store_status(const char *buf, size_t count, + acpi_handle handle, int mask) +{ + int rv, value; + int out = 0; + + rv = parse_arg(buf, count, &value); + if (rv > 0) + out = value ? 1 : 0; + + write_status(handle, out, mask); + + return rv; +} + +/* + * LEDD display + */ +static ssize_t show_ledd(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "0x%08x\n", hotk->ledd_status); +} + +static ssize_t store_ledd(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int rv, value; + + rv = parse_arg(buf, count, &value); + if (rv > 0) { + if (write_acpi_int(ledd_set_handle, NULL, value, NULL)) + printk(ASUS_WARNING "LED display write failed\n"); + else + hotk->ledd_status = (u32) value; + } + return rv; +} + +/* + * WLAN + */ +static ssize_t show_wlan(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", read_status(WL_ON)); +} + +static ssize_t store_wlan(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + return store_status(buf, count, wl_switch_handle, WL_ON); +} + +/* + * Bluetooth + */ +static ssize_t show_bluetooth(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", read_status(BT_ON)); +} + +static ssize_t store_bluetooth(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + return store_status(buf, count, bt_switch_handle, BT_ON); +} + +/* + * Display + */ +static void set_display(int value) +{ + /* no sanity check needed for now */ + if (write_acpi_int(display_set_handle, NULL, value, NULL)) + printk(ASUS_WARNING "Error setting display\n"); + return; +} + +static int read_display(void) +{ + unsigned long long value = 0; + acpi_status rv = AE_OK; + + /* In most of the case, we know how to set the display, but sometime + we can't read it */ + if (display_get_handle) { + rv = acpi_evaluate_integer(display_get_handle, NULL, + NULL, &value); + if (ACPI_FAILURE(rv)) + printk(ASUS_WARNING "Error reading display status\n"); + } + + value &= 0x0F; /* needed for some models, shouldn't hurt others */ + + return value; +} + +/* + * Now, *this* one could be more user-friendly, but so far, no-one has + * complained. The significance of bits is the same as in store_disp() + */ +static ssize_t show_disp(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", read_display()); +} + +/* + * Experimental support for display switching. As of now: 1 should activate + * the LCD output, 2 should do for CRT, 4 for TV-Out and 8 for DVI. + * Any combination (bitwise) of these will suffice. I never actually tested 4 + * displays hooked up simultaneously, so be warned. See the acpi4asus README + * for more info. + */ +static ssize_t store_disp(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int rv, value; + + rv = parse_arg(buf, count, &value); + if (rv > 0) + set_display(value); + return rv; +} + +/* + * Light Sens + */ +static void set_light_sens_switch(int value) +{ + if (write_acpi_int(ls_switch_handle, NULL, value, NULL)) + printk(ASUS_WARNING "Error setting light sensor switch\n"); + hotk->light_switch = value; +} + +static ssize_t show_lssw(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", hotk->light_switch); +} + +static ssize_t store_lssw(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int rv, value; + + rv = parse_arg(buf, count, &value); + if (rv > 0) + set_light_sens_switch(value ? 1 : 0); + + return rv; +} + +static void set_light_sens_level(int value) +{ + if (write_acpi_int(ls_level_handle, NULL, value, NULL)) + printk(ASUS_WARNING "Error setting light sensor level\n"); + hotk->light_level = value; +} + +static ssize_t show_lslvl(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", hotk->light_level); +} + +static ssize_t store_lslvl(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int rv, value; + + rv = parse_arg(buf, count, &value); + if (rv > 0) { + value = (0 < value) ? ((15 < value) ? 15 : value) : 0; + /* 0 <= value <= 15 */ + set_light_sens_level(value); + } + + return rv; +} + +/* + * GPS + */ +static ssize_t show_gps(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", read_status(GPS_ON)); +} + +static ssize_t store_gps(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + return store_status(buf, count, NULL, GPS_ON); +} + +static void asus_hotk_notify(acpi_handle handle, u32 event, void *data) +{ + /* TODO Find a better way to handle events count. */ + if (!hotk) + return; + + /* + * We need to tell the backlight device when the backlight power is + * switched + */ + if (event == ATKD_LCD_ON) { + write_status(NULL, 1, LCD_ON); + lcd_blank(FB_BLANK_UNBLANK); + } else if (event == ATKD_LCD_OFF) { + write_status(NULL, 0, LCD_ON); + lcd_blank(FB_BLANK_POWERDOWN); + } + + acpi_bus_generate_proc_event(hotk->device, event, + hotk->event_count[event % 128]++); + + return; +} + +#define ASUS_CREATE_DEVICE_ATTR(_name) \ + struct device_attribute dev_attr_##_name = { \ + .attr = { \ + .name = __stringify(_name), \ + .mode = 0 }, \ + .show = NULL, \ + .store = NULL, \ + } + +#define ASUS_SET_DEVICE_ATTR(_name, _mode, _show, _store) \ + do { \ + dev_attr_##_name.attr.mode = _mode; \ + dev_attr_##_name.show = _show; \ + dev_attr_##_name.store = _store; \ + } while(0) + +static ASUS_CREATE_DEVICE_ATTR(infos); +static ASUS_CREATE_DEVICE_ATTR(wlan); +static ASUS_CREATE_DEVICE_ATTR(bluetooth); +static ASUS_CREATE_DEVICE_ATTR(display); +static ASUS_CREATE_DEVICE_ATTR(ledd); +static ASUS_CREATE_DEVICE_ATTR(ls_switch); +static ASUS_CREATE_DEVICE_ATTR(ls_level); +static ASUS_CREATE_DEVICE_ATTR(gps); + +static struct attribute *asuspf_attributes[] = { + &dev_attr_infos.attr, + &dev_attr_wlan.attr, + &dev_attr_bluetooth.attr, + &dev_attr_display.attr, + &dev_attr_ledd.attr, + &dev_attr_ls_switch.attr, + &dev_attr_ls_level.attr, + &dev_attr_gps.attr, + NULL +}; + +static struct attribute_group asuspf_attribute_group = { + .attrs = asuspf_attributes +}; + +static struct platform_driver asuspf_driver = { + .driver = { + .name = ASUS_HOTK_FILE, + .owner = THIS_MODULE, + } +}; + +static struct platform_device *asuspf_device; + +static void asus_hotk_add_fs(void) +{ + ASUS_SET_DEVICE_ATTR(infos, 0444, show_infos, NULL); + + if (wl_switch_handle) + ASUS_SET_DEVICE_ATTR(wlan, 0644, show_wlan, store_wlan); + + if (bt_switch_handle) + ASUS_SET_DEVICE_ATTR(bluetooth, 0644, + show_bluetooth, store_bluetooth); + + if (display_set_handle && display_get_handle) + ASUS_SET_DEVICE_ATTR(display, 0644, show_disp, store_disp); + else if (display_set_handle) + ASUS_SET_DEVICE_ATTR(display, 0200, NULL, store_disp); + + if (ledd_set_handle) + ASUS_SET_DEVICE_ATTR(ledd, 0644, show_ledd, store_ledd); + + if (ls_switch_handle && ls_level_handle) { + ASUS_SET_DEVICE_ATTR(ls_level, 0644, show_lslvl, store_lslvl); + ASUS_SET_DEVICE_ATTR(ls_switch, 0644, show_lssw, store_lssw); + } + + if (gps_status_handle && gps_on_handle && gps_off_handle) + ASUS_SET_DEVICE_ATTR(gps, 0644, show_gps, store_gps); +} + +static int asus_handle_init(char *name, acpi_handle * handle, + char **paths, int num_paths) +{ + int i; + acpi_status status; + + for (i = 0; i < num_paths; i++) { + status = acpi_get_handle(NULL, paths[i], handle); + if (ACPI_SUCCESS(status)) + return 0; + } + + *handle = NULL; + return -ENODEV; +} + +#define ASUS_HANDLE_INIT(object) \ + asus_handle_init(#object, &object##_handle, object##_paths, \ + ARRAY_SIZE(object##_paths)) + +/* + * This function is used to initialize the hotk with right values. In this + * method, we can make all the detection we want, and modify the hotk struct + */ +static int asus_hotk_get_info(void) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *model = NULL; + unsigned long long bsts_result, hwrs_result; + char *string = NULL; + acpi_status status; + + /* + * Get DSDT headers early enough to allow for differentiating between + * models, but late enough to allow acpi_bus_register_driver() to fail + * before doing anything ACPI-specific. Should we encounter a machine, + * which needs special handling (i.e. its hotkey device has a different + * HID), this bit will be moved. A global variable asus_info contains + * the DSDT header. + */ + status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus_info); + if (ACPI_FAILURE(status)) + printk(ASUS_WARNING "Couldn't get the DSDT table header\n"); + + /* We have to write 0 on init this far for all ASUS models */ + if (write_acpi_int(hotk->handle, "INIT", 0, &buffer)) { + printk(ASUS_ERR "Hotkey initialization failed\n"); + return -ENODEV; + } + + /* This needs to be called for some laptops to init properly */ + status = + acpi_evaluate_integer(hotk->handle, "BSTS", NULL, &bsts_result); + if (ACPI_FAILURE(status)) + printk(ASUS_WARNING "Error calling BSTS\n"); + else if (bsts_result) + printk(ASUS_NOTICE "BSTS called, 0x%02x returned\n", + (uint) bsts_result); + + /* This too ... */ + write_acpi_int(hotk->handle, "CWAP", wapf, NULL); + + /* + * Try to match the object returned by INIT to the specific model. + * Handle every possible object (or the lack of thereof) the DSDT + * writers might throw at us. When in trouble, we pass NULL to + * asus_model_match() and try something completely different. + */ + if (buffer.pointer) { + model = buffer.pointer; + switch (model->type) { + case ACPI_TYPE_STRING: + string = model->string.pointer; + break; + case ACPI_TYPE_BUFFER: + string = model->buffer.pointer; + break; + default: + string = ""; + break; + } + } + hotk->name = kstrdup(string, GFP_KERNEL); + if (!hotk->name) + return -ENOMEM; + + if (*string) + printk(ASUS_NOTICE " %s model detected\n", string); + + ASUS_HANDLE_INIT(mled_set); + ASUS_HANDLE_INIT(tled_set); + ASUS_HANDLE_INIT(rled_set); + ASUS_HANDLE_INIT(pled_set); + ASUS_HANDLE_INIT(gled_set); + + ASUS_HANDLE_INIT(ledd_set); + + /* + * The HWRS method return informations about the hardware. + * 0x80 bit is for WLAN, 0x100 for Bluetooth. + * The significance of others is yet to be found. + * If we don't find the method, we assume the device are present. + */ + status = + acpi_evaluate_integer(hotk->handle, "HRWS", NULL, &hwrs_result); + if (ACPI_FAILURE(status)) + hwrs_result = WL_HWRS | BT_HWRS; + + if (hwrs_result & WL_HWRS) + ASUS_HANDLE_INIT(wl_switch); + if (hwrs_result & BT_HWRS) + ASUS_HANDLE_INIT(bt_switch); + + ASUS_HANDLE_INIT(wireless_status); + + ASUS_HANDLE_INIT(brightness_set); + ASUS_HANDLE_INIT(brightness_get); + + ASUS_HANDLE_INIT(lcd_switch); + + ASUS_HANDLE_INIT(display_set); + ASUS_HANDLE_INIT(display_get); + + /* There is a lot of models with "ALSL", but a few get + a real light sens, so we need to check it. */ + if (!ASUS_HANDLE_INIT(ls_switch)) + ASUS_HANDLE_INIT(ls_level); + + ASUS_HANDLE_INIT(gps_on); + ASUS_HANDLE_INIT(gps_off); + ASUS_HANDLE_INIT(gps_status); + + kfree(model); + + return AE_OK; +} + +static int asus_hotk_check(void) +{ + int result = 0; + + result = acpi_bus_get_status(hotk->device); + if (result) + return result; + + if (hotk->device->status.present) { + result = asus_hotk_get_info(); + } else { + printk(ASUS_ERR "Hotkey device not present, aborting\n"); + return -EINVAL; + } + + return result; +} + +static int asus_hotk_found; + +static int asus_hotk_add(struct acpi_device *device) +{ + acpi_status status = AE_OK; + int result; + + if (!device) + return -EINVAL; + + printk(ASUS_NOTICE "Asus Laptop Support version %s\n", + ASUS_LAPTOP_VERSION); + + hotk = kzalloc(sizeof(struct asus_hotk), GFP_KERNEL); + if (!hotk) + return -ENOMEM; + + hotk->handle = device->handle; + strcpy(acpi_device_name(device), ASUS_HOTK_DEVICE_NAME); + strcpy(acpi_device_class(device), ASUS_HOTK_CLASS); + device->driver_data = hotk; + hotk->device = device; + + result = asus_hotk_check(); + if (result) + goto end; + + asus_hotk_add_fs(); + + /* + * We install the handler, it will receive the hotk in parameter, so, we + * could add other data to the hotk struct + */ + status = acpi_install_notify_handler(hotk->handle, ACPI_ALL_NOTIFY, + asus_hotk_notify, hotk); + if (ACPI_FAILURE(status)) + printk(ASUS_ERR "Error installing notify handler\n"); + + asus_hotk_found = 1; + + /* WLED and BLED are on by default */ + write_status(bt_switch_handle, 1, BT_ON); + write_status(wl_switch_handle, 1, WL_ON); + + /* If the h/w switch is off, we need to check the real status */ + write_status(NULL, read_status(BT_ON), BT_ON); + write_status(NULL, read_status(WL_ON), WL_ON); + + /* LCD Backlight is on by default */ + write_status(NULL, 1, LCD_ON); + + /* LED display is off by default */ + hotk->ledd_status = 0xFFF; + + /* Set initial values of light sensor and level */ + hotk->light_switch = 1; /* Default to light sensor disabled */ + hotk->light_level = 0; /* level 5 for sensor sensitivity */ + + if (ls_switch_handle) + set_light_sens_switch(hotk->light_switch); + + if (ls_level_handle) + set_light_sens_level(hotk->light_level); + + /* GPS is on by default */ + write_status(NULL, 1, GPS_ON); + + end: + if (result) { + kfree(hotk->name); + kfree(hotk); + } + + return result; +} + +static int asus_hotk_remove(struct acpi_device *device, int type) +{ + acpi_status status = 0; + + if (!device || !acpi_driver_data(device)) + return -EINVAL; + + status = acpi_remove_notify_handler(hotk->handle, ACPI_ALL_NOTIFY, + asus_hotk_notify); + if (ACPI_FAILURE(status)) + printk(ASUS_ERR "Error removing notify handler\n"); + + kfree(hotk->name); + kfree(hotk); + + return 0; +} + +static void asus_backlight_exit(void) +{ + if (asus_backlight_device) + backlight_device_unregister(asus_backlight_device); +} + +#define ASUS_LED_UNREGISTER(object) \ + if (object##_led.dev) \ + led_classdev_unregister(&object##_led) + +static void asus_led_exit(void) +{ + destroy_workqueue(led_workqueue); + ASUS_LED_UNREGISTER(mled); + ASUS_LED_UNREGISTER(tled); + ASUS_LED_UNREGISTER(pled); + ASUS_LED_UNREGISTER(rled); + ASUS_LED_UNREGISTER(gled); +} + +static void __exit asus_laptop_exit(void) +{ + asus_backlight_exit(); + asus_led_exit(); + + acpi_bus_unregister_driver(&asus_hotk_driver); + sysfs_remove_group(&asuspf_device->dev.kobj, &asuspf_attribute_group); + platform_device_unregister(asuspf_device); + platform_driver_unregister(&asuspf_driver); +} + +static int asus_backlight_init(struct device *dev) +{ + struct backlight_device *bd; + + if (brightness_set_handle && lcd_switch_handle) { + bd = backlight_device_register(ASUS_HOTK_FILE, dev, + NULL, &asusbl_ops); + if (IS_ERR(bd)) { + printk(ASUS_ERR + "Could not register asus backlight device\n"); + asus_backlight_device = NULL; + return PTR_ERR(bd); + } + + asus_backlight_device = bd; + + bd->props.max_brightness = 15; + bd->props.brightness = read_brightness(NULL); + bd->props.power = FB_BLANK_UNBLANK; + backlight_update_status(bd); + } + return 0; +} + +static int asus_led_register(acpi_handle handle, + struct led_classdev *ldev, struct device *dev) +{ + if (!handle) + return 0; + + return led_classdev_register(dev, ldev); +} + +#define ASUS_LED_REGISTER(object, device) \ + asus_led_register(object##_set_handle, &object##_led, device) + +static int asus_led_init(struct device *dev) +{ + int rv; + + rv = ASUS_LED_REGISTER(mled, dev); + if (rv) + goto out; + + rv = ASUS_LED_REGISTER(tled, dev); + if (rv) + goto out1; + + rv = ASUS_LED_REGISTER(rled, dev); + if (rv) + goto out2; + + rv = ASUS_LED_REGISTER(pled, dev); + if (rv) + goto out3; + + rv = ASUS_LED_REGISTER(gled, dev); + if (rv) + goto out4; + + led_workqueue = create_singlethread_workqueue("led_workqueue"); + if (!led_workqueue) + goto out5; + + return 0; +out5: + rv = -ENOMEM; + ASUS_LED_UNREGISTER(gled); +out4: + ASUS_LED_UNREGISTER(pled); +out3: + ASUS_LED_UNREGISTER(rled); +out2: + ASUS_LED_UNREGISTER(tled); +out1: + ASUS_LED_UNREGISTER(mled); +out: + return rv; +} + +static int __init asus_laptop_init(void) +{ + struct device *dev; + int result; + + if (acpi_disabled) + return -ENODEV; + + result = acpi_bus_register_driver(&asus_hotk_driver); + if (result < 0) + return result; + + /* + * This is a bit of a kludge. We only want this module loaded + * for ASUS systems, but there's currently no way to probe the + * ACPI namespace for ASUS HIDs. So we just return failure if + * we didn't find one, which will cause the module to be + * unloaded. + */ + if (!asus_hotk_found) { + acpi_bus_unregister_driver(&asus_hotk_driver); + return -ENODEV; + } + + dev = acpi_get_physical_device(hotk->device->handle); + + if (!acpi_video_backlight_support()) { + result = asus_backlight_init(dev); + if (result) + goto fail_backlight; + } else + printk(ASUS_INFO "Brightness ignored, must be controlled by " + "ACPI video driver\n"); + + result = asus_led_init(dev); + if (result) + goto fail_led; + + /* Register platform stuff */ + result = platform_driver_register(&asuspf_driver); + if (result) + goto fail_platform_driver; + + asuspf_device = platform_device_alloc(ASUS_HOTK_FILE, -1); + if (!asuspf_device) { + result = -ENOMEM; + goto fail_platform_device1; + } + + result = platform_device_add(asuspf_device); + if (result) + goto fail_platform_device2; + + result = sysfs_create_group(&asuspf_device->dev.kobj, + &asuspf_attribute_group); + if (result) + goto fail_sysfs; + + return 0; + + fail_sysfs: + platform_device_del(asuspf_device); + + fail_platform_device2: + platform_device_put(asuspf_device); + + fail_platform_device1: + platform_driver_unregister(&asuspf_driver); + + fail_platform_driver: + asus_led_exit(); + + fail_led: + asus_backlight_exit(); + + fail_backlight: + + return result; +} + +module_init(asus_laptop_init); +module_exit(asus_laptop_exit); |
