diff options
Diffstat (limited to 'drivers/pinctrl/intel/pinctrl-intel.h')
| -rw-r--r-- | drivers/pinctrl/intel/pinctrl-intel.h | 65 |
1 files changed, 54 insertions, 11 deletions
diff --git a/drivers/pinctrl/intel/pinctrl-intel.h b/drivers/pinctrl/intel/pinctrl-intel.h index fe9521f..7fdb077 100644 --- a/drivers/pinctrl/intel/pinctrl-intel.h +++ b/drivers/pinctrl/intel/pinctrl-intel.h @@ -22,13 +22,16 @@ struct device; * @name: Name of the groups * @pins: All pins in this group * @npins: Number of pins in this groups - * @mode: Native mode in which the group is muxed out @pins + * @mode: Native mode in which the group is muxed out @pins. Used if @modes + * is %NULL. + * @modes: If not %NULL this will hold mode for each pin in @pins */ struct intel_pingroup { const char *name; const unsigned *pins; size_t npins; unsigned short mode; + const unsigned *modes; }; /** @@ -44,6 +47,23 @@ struct intel_function { }; /** + * struct intel_padgroup - Hardware pad group information + * @reg_num: GPI_IS register number + * @base: Starting pin of this group + * @size: Size of this group (maximum is 32). + * @padown_num: PAD_OWN register number (assigned by the core driver) + * + * If pad groups of a community are not the same size, use this structure + * to specify them. + */ +struct intel_padgroup { + unsigned reg_num; + unsigned base; + unsigned size; + unsigned padown_num; +}; + +/** * struct intel_community - Intel pin community description * @barno: MMIO BAR number where registers for this community reside * @padown_offset: Register offset of PAD_OWN register from @regs. If %0 @@ -56,13 +76,22 @@ struct intel_function { * @ie_offset: Register offset of GPI_IE from @regs. * @pin_base: Starting pin of pins in this community * @gpp_size: Maximum number of pads in each group, such as PADCFGLOCK, - * HOSTSW_OWN, GPI_IS, GPI_IE, etc. + * HOSTSW_OWN, GPI_IS, GPI_IE, etc. Used when @gpps is %NULL. + * @gpp_num_padown_regs: Number of pad registers each pad group consumes at + * minimum. Use %0 if the number of registers can be + * determined by the size of the group. * @npins: Number of pins in this community * @features: Additional features supported by the hardware + * @gpps: Pad groups if the controller has variable size pad groups + * @ngpps: Number of pad groups in this community * @regs: Community specific common registers (reserved for core driver) * @pad_regs: Community specific pad registers (reserved for core driver) - * @ngpps: Number of groups (hw groups) in this community (reserved for - * core driver) + * + * Most Intel GPIO host controllers this driver supports each pad group is + * of equal size (except the last one). In that case the driver can just + * fill in @gpp_size field and let the core driver to handle the rest. If + * the controller has pad groups of variable size the client driver can + * pass custom @gpps and @ngpps instead. */ struct intel_community { unsigned barno; @@ -72,23 +101,37 @@ struct intel_community { unsigned ie_offset; unsigned pin_base; unsigned gpp_size; + unsigned gpp_num_padown_regs; size_t npins; unsigned features; + const struct intel_padgroup *gpps; + size_t ngpps; + /* Reserved for the core driver */ void __iomem *regs; void __iomem *pad_regs; - size_t ngpps; }; /* Additional features supported by the hardware */ #define PINCTRL_FEATURE_DEBOUNCE BIT(0) #define PINCTRL_FEATURE_1K_PD BIT(1) -#define PIN_GROUP(n, p, m) \ - { \ - .name = (n), \ - .pins = (p), \ - .npins = ARRAY_SIZE((p)), \ - .mode = (m), \ +/** + * PIN_GROUP - Declare a pin group + * @n: Name of the group + * @p: An array of pins this group consists + * @m: Mode which the pins are put when this group is active. Can be either + * a single integer or an array of integers in which case mode is per + * pin. + */ +#define PIN_GROUP(n, p, m) \ + { \ + .name = (n), \ + .pins = (p), \ + .npins = ARRAY_SIZE((p)), \ + .mode = __builtin_choose_expr( \ + __builtin_constant_p((m)), (m), 0), \ + .modes = __builtin_choose_expr( \ + __builtin_constant_p((m)), NULL, (m)), \ } #define FUNCTION(n, g) \ |
