diff options
Diffstat (limited to 'drivers/phy/phy-tusb1210.c')
| -rw-r--r-- | drivers/phy/phy-tusb1210.c | 153 |
1 files changed, 153 insertions, 0 deletions
diff --git a/drivers/phy/phy-tusb1210.c b/drivers/phy/phy-tusb1210.c new file mode 100644 index 0000000..07efdd3 --- /dev/null +++ b/drivers/phy/phy-tusb1210.c @@ -0,0 +1,153 @@ +/** + * tusb1210.c - TUSB1210 USB ULPI PHY driver + * + * Copyright (C) 2015 Intel Corporation + * + * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/ulpi/driver.h> +#include <linux/gpio/consumer.h> + +#include "ulpi_phy.h" + +#define TUSB1210_VENDOR_SPECIFIC2 0x80 +#define TUSB1210_VENDOR_SPECIFIC2_IHSTX_SHIFT 0 +#define TUSB1210_VENDOR_SPECIFIC2_ZHSDRV_SHIFT 4 +#define TUSB1210_VENDOR_SPECIFIC2_DP_SHIFT 6 + +struct tusb1210 { + struct ulpi *ulpi; + struct phy *phy; + struct gpio_desc *gpio_reset; + struct gpio_desc *gpio_cs; + u8 vendor_specific2; +}; + +static int tusb1210_power_on(struct phy *phy) +{ + struct tusb1210 *tusb = phy_get_drvdata(phy); + + gpiod_set_value_cansleep(tusb->gpio_reset, 1); + gpiod_set_value_cansleep(tusb->gpio_cs, 1); + + /* Restore the optional eye diagram optimization value */ + if (tusb->vendor_specific2) + ulpi_write(tusb->ulpi, TUSB1210_VENDOR_SPECIFIC2, + tusb->vendor_specific2); + + return 0; +} + +static int tusb1210_power_off(struct phy *phy) +{ + struct tusb1210 *tusb = phy_get_drvdata(phy); + + gpiod_set_value_cansleep(tusb->gpio_reset, 0); + gpiod_set_value_cansleep(tusb->gpio_cs, 0); + + return 0; +} + +static struct phy_ops phy_ops = { + .power_on = tusb1210_power_on, + .power_off = tusb1210_power_off, + .owner = THIS_MODULE, +}; + +static int tusb1210_probe(struct ulpi *ulpi) +{ + struct gpio_desc *gpio; + struct tusb1210 *tusb; + u8 val, reg; + int ret; + + tusb = devm_kzalloc(&ulpi->dev, sizeof(*tusb), GFP_KERNEL); + if (!tusb) + return -ENOMEM; + + gpio = devm_gpiod_get(&ulpi->dev, "reset"); + if (!IS_ERR(gpio)) { + ret = gpiod_direction_output(gpio, 0); + if (ret) + return ret; + gpiod_set_value_cansleep(gpio, 1); + tusb->gpio_reset = gpio; + } + + gpio = devm_gpiod_get(&ulpi->dev, "cs"); + if (!IS_ERR(gpio)) { + ret = gpiod_direction_output(gpio, 0); + if (ret) + return ret; + gpiod_set_value_cansleep(gpio, 1); + tusb->gpio_cs = gpio; + } + + /* + * VENDOR_SPECIFIC2 register in TUSB1210 can be used for configuring eye + * diagram optimization and DP/DM swap. + */ + + /* High speed output drive strength configuration */ + device_property_read_u8(&ulpi->dev, "ihstx", &val); + reg = val << TUSB1210_VENDOR_SPECIFIC2_IHSTX_SHIFT; + + /* High speed output impedance configuration */ + device_property_read_u8(&ulpi->dev, "zhsdrv", &val); + reg |= val << TUSB1210_VENDOR_SPECIFIC2_ZHSDRV_SHIFT; + + /* DP/DM swap control */ + device_property_read_u8(&ulpi->dev, "datapolarity", &val); + reg |= val << TUSB1210_VENDOR_SPECIFIC2_DP_SHIFT; + + if (reg) { + ulpi_write(ulpi, TUSB1210_VENDOR_SPECIFIC2, reg); + tusb->vendor_specific2 = reg; + } + + tusb->phy = ulpi_phy_create(ulpi, &phy_ops); + if (IS_ERR(tusb->phy)) + return PTR_ERR(tusb->phy); + + tusb->ulpi = ulpi; + + phy_set_drvdata(tusb->phy, tusb); + ulpi_set_drvdata(ulpi, tusb); + return 0; +} + +static void tusb1210_remove(struct ulpi *ulpi) +{ + struct tusb1210 *tusb = ulpi_get_drvdata(ulpi); + + ulpi_phy_destroy(ulpi, tusb->phy); +} + +#define TI_VENDOR_ID 0x0451 + +static const struct ulpi_device_id tusb1210_ulpi_id[] = { + { TI_VENDOR_ID, 0x1507, }, + { }, +}; +MODULE_DEVICE_TABLE(ulpi, tusb1210_ulpi_id); + +static struct ulpi_driver tusb1210_driver = { + .id_table = tusb1210_ulpi_id, + .probe = tusb1210_probe, + .remove = tusb1210_remove, + .driver = { + .name = "tusb1210", + .owner = THIS_MODULE, + }, +}; + +module_ulpi_driver(tusb1210_driver); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("TUSB1210 ULPI PHY driver"); |
