diff options
Diffstat (limited to 'drivers/phy/phy-qcom-ufs-qmp-14nm.h')
| -rw-r--r-- | drivers/phy/phy-qcom-ufs-qmp-14nm.h | 177 |
1 files changed, 177 insertions, 0 deletions
diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.h b/drivers/phy/phy-qcom-ufs-qmp-14nm.h new file mode 100644 index 0000000..3aefdba --- /dev/null +++ b/drivers/phy/phy-qcom-ufs-qmp-14nm.h @@ -0,0 +1,177 @@ +/* + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef UFS_QCOM_PHY_QMP_14NM_H_ +#define UFS_QCOM_PHY_QMP_14NM_H_ + +#include "phy-qcom-ufs-i.h" + +/* QCOM UFS PHY control registers */ +#define COM_OFF(x) (0x000 + x) +#define PHY_OFF(x) (0xC00 + x) +#define TX_OFF(n, x) (0x400 + (0x400 * n) + x) +#define RX_OFF(n, x) (0x600 + (0x400 * n) + x) + +/* UFS PHY QSERDES COM registers */ +#define QSERDES_COM_BG_TIMER COM_OFF(0x0C) +#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x34) +#define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x3C) +#define QSERDES_COM_LOCK_CMP1_MODE0 COM_OFF(0x4C) +#define QSERDES_COM_LOCK_CMP2_MODE0 COM_OFF(0x50) +#define QSERDES_COM_LOCK_CMP3_MODE0 COM_OFF(0x54) +#define QSERDES_COM_LOCK_CMP1_MODE1 COM_OFF(0x58) +#define QSERDES_COM_LOCK_CMP2_MODE1 COM_OFF(0x5C) +#define QSERDES_COM_LOCK_CMP3_MODE1 COM_OFF(0x60) +#define QSERDES_COM_CP_CTRL_MODE0 COM_OFF(0x78) +#define QSERDES_COM_CP_CTRL_MODE1 COM_OFF(0x7C) +#define QSERDES_COM_PLL_RCTRL_MODE0 COM_OFF(0x84) +#define QSERDES_COM_PLL_RCTRL_MODE1 COM_OFF(0x88) +#define QSERDES_COM_PLL_CCTRL_MODE0 COM_OFF(0x90) +#define QSERDES_COM_PLL_CCTRL_MODE1 COM_OFF(0x94) +#define QSERDES_COM_SYSCLK_EN_SEL COM_OFF(0xAC) +#define QSERDES_COM_RESETSM_CNTRL COM_OFF(0xB4) +#define QSERDES_COM_LOCK_CMP_EN COM_OFF(0xC8) +#define QSERDES_COM_LOCK_CMP_CFG COM_OFF(0xCC) +#define QSERDES_COM_DEC_START_MODE0 COM_OFF(0xD0) +#define QSERDES_COM_DEC_START_MODE1 COM_OFF(0xD4) +#define QSERDES_COM_DIV_FRAC_START1_MODE0 COM_OFF(0xDC) +#define QSERDES_COM_DIV_FRAC_START2_MODE0 COM_OFF(0xE0) +#define QSERDES_COM_DIV_FRAC_START3_MODE0 COM_OFF(0xE4) +#define QSERDES_COM_DIV_FRAC_START1_MODE1 COM_OFF(0xE8) +#define QSERDES_COM_DIV_FRAC_START2_MODE1 COM_OFF(0xEC) +#define QSERDES_COM_DIV_FRAC_START3_MODE1 COM_OFF(0xF0) +#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 COM_OFF(0x108) +#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 COM_OFF(0x10C) +#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 COM_OFF(0x110) +#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 COM_OFF(0x114) +#define QSERDES_COM_VCO_TUNE_CTRL COM_OFF(0x124) +#define QSERDES_COM_VCO_TUNE_MAP COM_OFF(0x128) +#define QSERDES_COM_VCO_TUNE1_MODE0 COM_OFF(0x12C) +#define QSERDES_COM_VCO_TUNE2_MODE0 COM_OFF(0x130) +#define QSERDES_COM_VCO_TUNE1_MODE1 COM_OFF(0x134) +#define QSERDES_COM_VCO_TUNE2_MODE1 COM_OFF(0x138) +#define QSERDES_COM_VCO_TUNE_TIMER1 COM_OFF(0x144) +#define QSERDES_COM_VCO_TUNE_TIMER2 COM_OFF(0x148) +#define QSERDES_COM_CLK_SELECT COM_OFF(0x174) +#define QSERDES_COM_HSCLK_SEL COM_OFF(0x178) +#define QSERDES_COM_CORECLK_DIV COM_OFF(0x184) +#define QSERDES_COM_CORE_CLK_EN COM_OFF(0x18C) +#define QSERDES_COM_CMN_CONFIG COM_OFF(0x194) +#define QSERDES_COM_SVS_MODE_CLK_SEL COM_OFF(0x19C) +#define QSERDES_COM_CORECLK_DIV_MODE1 COM_OFF(0x1BC) + +/* UFS PHY registers */ +#define UFS_PHY_PHY_START PHY_OFF(0x00) +#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x04) +#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x168) + +/* UFS PHY TX registers */ +#define QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN TX_OFF(0, 0x68) +#define QSERDES_TX_LANE_MODE TX_OFF(0, 0x94) + +/* UFS PHY RX registers */ +#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN RX_OFF(0, 0x40) +#define QSERDES_RX_RX_TERM_BW RX_OFF(0, 0x90) +#define QSERDES_RX_RX_EQ_GAIN1_LSB RX_OFF(0, 0xC4) +#define QSERDES_RX_RX_EQ_GAIN1_MSB RX_OFF(0, 0xC8) +#define QSERDES_RX_RX_EQ_GAIN2_LSB RX_OFF(0, 0xCC) +#define QSERDES_RX_RX_EQ_GAIN2_MSB RX_OFF(0, 0xD0) +#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 RX_OFF(0, 0xD8) +#define QSERDES_RX_SIGDET_CNTRL RX_OFF(0, 0x114) +#define QSERDES_RX_SIGDET_LVL RX_OFF(0, 0x118) +#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL RX_OFF(0, 0x11C) +#define QSERDES_RX_RX_INTERFACE_MODE RX_OFF(0, 0x12C) + +/* + * This structure represents the 14nm specific phy. + * common_cfg MUST remain the first field in this structure + * in case extra fields are added. This way, when calling + * get_ufs_qcom_phy() of generic phy, we can extract the + * common phy structure (struct ufs_qcom_phy) out of it + * regardless of the relevant specific phy. + */ +struct ufs_qcom_phy_qmp_14nm { + struct ufs_qcom_phy common_cfg; +}; + +static struct ufs_qcom_phy_calibration phy_cal_table_rate_A[] = { + UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CMN_CONFIG, 0x0e), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0xd7), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CLK_SELECT, 0x30), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYS_CLK_CTRL, 0x06), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BG_TIMER, 0x0a), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_SEL, 0x05), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV, 0x0a), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_EN, 0x01), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_CTRL, 0x10), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x20), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORE_CLK_EN, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_CFG, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER1, 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x14), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE0, 0x82), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE0, 0x0b), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE0, 0x16), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE0, 0x28), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE0, 0x28), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE0, 0x02), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE0, 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE0, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE1, 0x98), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE1, 0x0b), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE1, 0x16), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE1, 0x28), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE1, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE1, 0x32), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE1, 0x00), + + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN, 0x45), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE, 0x02), + + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_LVL, 0x24), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL, 0x02), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_INTERFACE_MODE, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_TERM_BW, 0x5B), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0F), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E), +}; + +static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = { + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x54), +}; + +#endif |
