summaryrefslogtreecommitdiffstats
path: root/drivers/pcmcia
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pcmcia')
-rw-r--r--drivers/pcmcia/m8xx_pcmcia.c81
1 files changed, 0 insertions, 81 deletions
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index 9a12ead..18c0d8d 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -68,12 +68,6 @@ MODULE_LICENSE("Dual MPL/GPL");
#if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B)
-/* The RPX series use SLOT_B */
-#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)
-#define CONFIG_PCMCIA_SLOT_B
-#define CONFIG_BD_IS_MHZ
-#endif
-
/* The ADS board use SLOT_A */
#ifdef CONFIG_ADS
#define CONFIG_PCMCIA_SLOT_A
@@ -253,81 +247,6 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev);
#define PCMCIA_BMT_LIMIT (15*4) /* Bus Monitor Timeout value */
-/* ------------------------------------------------------------------------- */
-/* board specific stuff: */
-/* voltage_set(), hardware_enable() and hardware_disable() */
-/* ------------------------------------------------------------------------- */
-/* RPX Boards from Embedded Planet */
-
-#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)
-
-/* The RPX boards seems to have it's bus monitor timeout set to 6*8 clocks.
- * SYPCR is write once only, therefore must the slowest memory be faster
- * than the bus monitor or we will get a machine check due to the bus timeout.
- */
-
-#define PCMCIA_BOARD_MSG "RPX CLASSIC or RPX LITE"
-
-#undef PCMCIA_BMT_LIMIT
-#define PCMCIA_BMT_LIMIT (6*8)
-
-static int voltage_set(int slot, int vcc, int vpp)
-{
- u32 reg = 0;
-
- switch (vcc) {
- case 0:
- break;
- case 33:
- reg |= BCSR1_PCVCTL4;
- break;
- case 50:
- reg |= BCSR1_PCVCTL5;
- break;
- default:
- return 1;
- }
-
- switch (vpp) {
- case 0:
- break;
- case 33:
- case 50:
- if (vcc == vpp)
- reg |= BCSR1_PCVCTL6;
- else
- return 1;
- break;
- case 120:
- reg |= BCSR1_PCVCTL7;
- default:
- return 1;
- }
-
- if (!((vcc == 50) || (vcc == 0)))
- return 1;
-
- /* first, turn off all power */
-
- out_be32(((u32 *) RPX_CSR_ADDR),
- in_be32(((u32 *) RPX_CSR_ADDR)) & ~(BCSR1_PCVCTL4 |
- BCSR1_PCVCTL5 |
- BCSR1_PCVCTL6 |
- BCSR1_PCVCTL7));
-
- /* enable new powersettings */
-
- out_be32(((u32 *) RPX_CSR_ADDR), in_be32(((u32 *) RPX_CSR_ADDR)) | reg);
-
- return 0;
-}
-
-#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
-#define hardware_enable(_slot_) /* No hardware to enable */
-#define hardware_disable(_slot_) /* No hardware to disable */
-
-#endif /* CONFIG_RPXCLASSIC */
-
/* FADS Boards from Motorola */
#if defined(CONFIG_FADS)
OpenPOWER on IntegriCloud