diff options
Diffstat (limited to 'drivers/pcmcia')
-rw-r--r-- | drivers/pcmcia/cs.c | 15 | ||||
-rw-r--r-- | drivers/pcmcia/yenta_socket.c | 10 |
2 files changed, 18 insertions, 7 deletions
diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index 4d1cc53..e39178f 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -215,6 +215,13 @@ int pcmcia_register_socket(struct pcmcia_socket *socket) list_add_tail(&socket->socket_list, &pcmcia_socket_list); up_write(&pcmcia_socket_list_rwsem); +#ifndef CONFIG_CARDBUS + /* + * If we do not support Cardbus, ensure that + * the Cardbus socket capability is disabled. + */ + socket->features &= ~SS_CAP_CARDBUS; +#endif /* set proper values in socket->dev */ socket->dev.class_data = socket; @@ -448,11 +455,11 @@ static int socket_setup(struct pcmcia_socket *skt, int initial_delay) } if (status & SS_CARDBUS) { + if (!(skt->features & SS_CAP_CARDBUS)) { + cs_err(skt, "cardbus cards are not supported.\n"); + return CS_BAD_TYPE; + } skt->state |= SOCKET_CARDBUS; -#ifndef CONFIG_CARDBUS - cs_err(skt, "cardbus cards are not supported.\n"); - return CS_BAD_TYPE; -#endif } /* diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index 1d593e1..0e7aa81 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -868,14 +868,11 @@ static int yenta_probe_cb_irq(struct yenta_socket *socket) */ static void yenta_get_socket_capabilities(struct yenta_socket *socket, u32 isa_irq_mask) { - socket->socket.features |= SS_CAP_PAGE_REGS | SS_CAP_PCCARD | SS_CAP_CARDBUS; - socket->socket.map_size = 0x1000; socket->socket.pci_irq = socket->cb_irq; if (isa_probe) socket->socket.irq_mask = yenta_probe_irq(socket, isa_irq_mask); else socket->socket.irq_mask = 0; - socket->socket.cb_dev = socket->dev; printk(KERN_INFO "Yenta: ISA IRQ mask 0x%04x, PCI irq %d\n", socket->socket.irq_mask, socket->cb_irq); @@ -941,6 +938,9 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i socket->socket.dev.dev = &dev->dev; socket->socket.driver_data = socket; socket->socket.owner = THIS_MODULE; + socket->socket.features = SS_CAP_PAGE_REGS | SS_CAP_PCCARD; + socket->socket.map_size = 0x1000; + socket->socket.cb_dev = dev; /* prepare struct yenta_socket */ socket->dev = dev; @@ -1011,6 +1011,10 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i socket->poll_timer.data = (unsigned long)socket; socket->poll_timer.expires = jiffies + HZ; add_timer(&socket->poll_timer); + printk(KERN_INFO "Yenta: no PCI IRQ, CardBus support disabled for this socket.\n" + KERN_INFO "Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.\n"); + } else { + socket->socket.features |= SS_CAP_CARDBUS; } /* Figure out what the dang thing can do for the PCMCIA layer... */ |