diff options
Diffstat (limited to 'drivers/pcmcia/ti113x.h')
| -rw-r--r-- | drivers/pcmcia/ti113x.h | 171 |
1 files changed, 167 insertions, 4 deletions
diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h index a8a1d10..fbe233e 100644 --- a/drivers/pcmcia/ti113x.h +++ b/drivers/pcmcia/ti113x.h @@ -154,8 +154,6 @@ #define ENE_TEST_C9 0xc9 /* 8bit */ #define ENE_TEST_C9_TLTENABLE 0x02 -#ifdef CONFIG_CARDBUS - /* * Texas Instruments CardBus controller overrides. */ @@ -611,6 +609,170 @@ out: } } + +/* Returns true value if the second slot of a two-slot controller is empty */ +static int ti12xx_2nd_slot_empty(struct yenta_socket *socket) +{ + struct pci_dev *func; + struct yenta_socket *slot2; + int devfn; + unsigned int state; + int ret = 1; + + /* catch the two-slot controllers */ + switch (socket->dev->device) { + case PCI_DEVICE_ID_TI_1220: + case PCI_DEVICE_ID_TI_1221: + case PCI_DEVICE_ID_TI_1225: + case PCI_DEVICE_ID_TI_1251A: + case PCI_DEVICE_ID_TI_1251B: + case PCI_DEVICE_ID_TI_1420: + case PCI_DEVICE_ID_TI_1450: + case PCI_DEVICE_ID_TI_1451A: + case PCI_DEVICE_ID_TI_1520: + case PCI_DEVICE_ID_TI_1620: + case PCI_DEVICE_ID_TI_4520: + case PCI_DEVICE_ID_TI_4450: + case PCI_DEVICE_ID_TI_4451: + /* + * there are way more, but they need to be added in yenta_socket.c + * and pci_ids.h first anyway. + */ + break; + + /* single-slot controllers have the 2nd slot empty always :) */ + default: + return 1; + } + + /* get other slot */ + devfn = socket->dev->devfn & ~0x07; + func = pci_get_slot(socket->dev->bus, + (socket->dev->devfn & 0x07) ? devfn : devfn | 0x01); + if (!func) + return 1; + + slot2 = pci_get_drvdata(func); + if (!slot2) + goto out; + + /* check state */ + yenta_get_status(&socket->socket, &state); + if (state & SS_DETECT) { + ret = 0; + goto out; + } + +out: + pci_dev_put(func); + return ret; +} + +/* + * TI specifiy parts for the power hook. + * + * some TI's with some CB's produces interrupt storm on power on. it has been + * seen with atheros wlan cards on TI1225 and TI1410. solution is simply to + * disable any CB interrupts during this time. + */ +static int ti12xx_power_hook(struct pcmcia_socket *sock, int operation) +{ + struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket); + u32 mfunc, devctl, sysctl; + u8 gpio3; + + /* only POWER_PRE and POWER_POST are interesting */ + if ((operation != HOOK_POWER_PRE) && (operation != HOOK_POWER_POST)) + return 0; + + devctl = config_readb(socket, TI113X_DEVICE_CONTROL); + sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL); + mfunc = config_readl(socket, TI122X_MFUNC); + + /* + * all serial/tied: only disable when modparm set. always doing it + * would mean a regression for working setups 'cos it disables the + * interrupts for both both slots on 2-slot controllers + * (and users of single slot controllers where it's save have to + * live with setting the modparm, most don't have to anyway) + */ + if (((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) && + (pwr_irqs_off || ti12xx_2nd_slot_empty(socket))) { + switch (socket->dev->device) { + case PCI_DEVICE_ID_TI_1250: + case PCI_DEVICE_ID_TI_1251A: + case PCI_DEVICE_ID_TI_1251B: + case PCI_DEVICE_ID_TI_1450: + case PCI_DEVICE_ID_TI_1451A: + case PCI_DEVICE_ID_TI_4450: + case PCI_DEVICE_ID_TI_4451: + /* these chips have no IRQSER setting in MFUNC3 */ + break; + + default: + if (operation == HOOK_POWER_PRE) + mfunc = (mfunc & ~TI122X_MFUNC3_MASK); + else + mfunc = (mfunc & ~TI122X_MFUNC3_MASK) | TI122X_MFUNC3_IRQSER; + } + + return 0; + } + + /* do the job differently for func0/1 */ + if ((PCI_FUNC(socket->dev->devfn) == 0) || + ((sysctl & TI122X_SCR_INTRTIE) && + (pwr_irqs_off || ti12xx_2nd_slot_empty(socket)))) { + /* some bridges are different */ + switch (socket->dev->device) { + case PCI_DEVICE_ID_TI_1250: + case PCI_DEVICE_ID_TI_1251A: + case PCI_DEVICE_ID_TI_1251B: + case PCI_DEVICE_ID_TI_1450: + /* those oldies use gpio3 for INTA */ + gpio3 = config_readb(socket, TI1250_GPIO3_CONTROL); + if (operation == HOOK_POWER_PRE) + gpio3 = (gpio3 & ~TI1250_GPIO_MODE_MASK) | 0x40; + else + gpio3 &= ~TI1250_GPIO_MODE_MASK; + config_writeb(socket, TI1250_GPIO3_CONTROL, gpio3); + break; + + default: + /* all new bridges are the same */ + if (operation == HOOK_POWER_PRE) + mfunc &= ~TI122X_MFUNC0_MASK; + else + mfunc |= TI122X_MFUNC0_INTA; + config_writel(socket, TI122X_MFUNC, mfunc); + } + } else { + switch (socket->dev->device) { + case PCI_DEVICE_ID_TI_1251A: + case PCI_DEVICE_ID_TI_1251B: + case PCI_DEVICE_ID_TI_1450: + /* those have INTA elsewhere and INTB in MFUNC0 */ + if (operation == HOOK_POWER_PRE) + mfunc &= ~TI122X_MFUNC0_MASK; + else + mfunc |= TI125X_MFUNC0_INTB; + config_writel(socket, TI122X_MFUNC, mfunc); + + break; + + default: + /* all new bridges are the same */ + if (operation == HOOK_POWER_PRE) + mfunc &= ~TI122X_MFUNC1_MASK; + else + mfunc |= TI122X_MFUNC1_INTB; + config_writel(socket, TI122X_MFUNC, mfunc); + } + } + + return 0; +} + static int ti12xx_override(struct yenta_socket *socket) { u32 val, val_orig; @@ -654,6 +816,9 @@ static int ti12xx_override(struct yenta_socket *socket) else ti12xx_irqroute_func1(socket); + /* install power hook */ + socket->socket.power_hook = ti12xx_power_hook; + return ti_override(socket); } @@ -676,7 +841,5 @@ static int ti1250_override(struct yenta_socket *socket) return ti12xx_override(socket); } -#endif /* CONFIG_CARDBUS */ - #endif /* _LINUX_TI113X_H */ |
