diff options
Diffstat (limited to 'drivers/pcmcia/ti113x.h')
| -rw-r--r-- | drivers/pcmcia/ti113x.h | 115 |
1 files changed, 105 insertions, 10 deletions
diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h index fbe233e..da0b404 100644 --- a/drivers/pcmcia/ti113x.h +++ b/drivers/pcmcia/ti113x.h @@ -59,6 +59,7 @@ #define TI122X_SCR_SER_STEP 0xc0000000 #define TI122X_SCR_INTRTIE 0x20000000 +#define TIXX21_SCR_TIEALL 0x10000000 #define TI122X_SCR_CBRSVD 0x00400000 #define TI122X_SCR_MRBURSTDN 0x00008000 #define TI122X_SCR_MRBURSTUP 0x00004000 @@ -153,6 +154,12 @@ /* EnE test register */ #define ENE_TEST_C9 0xc9 /* 8bit */ #define ENE_TEST_C9_TLTENABLE 0x02 +#define ENE_TEST_C9_PFENABLE_F0 0x04 +#define ENE_TEST_C9_PFENABLE_F1 0x08 +#define ENE_TEST_C9_PFENABLE (ENE_TEST_C9_PFENABLE_F0 | ENE_TEST_C9_PFENABLE_F0) +#define ENE_TEST_C9_WPDISALBLE_F0 0x40 +#define ENE_TEST_C9_WPDISALBLE_F1 0x80 +#define ENE_TEST_C9_WPDISALBLE (ENE_TEST_C9_WPDISALBLE_F0 | ENE_TEST_C9_WPDISALBLE_F1) /* * Texas Instruments CardBus controller overrides. @@ -618,6 +625,7 @@ static int ti12xx_2nd_slot_empty(struct yenta_socket *socket) int devfn; unsigned int state; int ret = 1; + u32 sysctl; /* catch the two-slot controllers */ switch (socket->dev->device) { @@ -640,6 +648,24 @@ static int ti12xx_2nd_slot_empty(struct yenta_socket *socket) */ break; + case PCI_DEVICE_ID_TI_X515: + case PCI_DEVICE_ID_TI_X420: + case PCI_DEVICE_ID_TI_X620: + case PCI_DEVICE_ID_TI_XX21_XX11: + case PCI_DEVICE_ID_TI_7410: + case PCI_DEVICE_ID_TI_7610: + /* + * those are either single or dual slot CB with additional functions + * like 1394, smartcard reader, etc. check the TIEALL flag for them + * the TIEALL flag binds the IRQ of all functions toghether. + * we catch the single slot variants later. + */ + sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL); + if (sysctl & TIXX21_SCR_TIEALL) + return 0; + + break; + /* single-slot controllers have the 2nd slot empty always :) */ default: return 1; @@ -652,6 +678,15 @@ static int ti12xx_2nd_slot_empty(struct yenta_socket *socket) if (!func) return 1; + /* + * check that the device id of both slots match. this is needed for the + * XX21 and the XX11 controller that share the same device id for single + * and dual slot controllers. return '2nd slot empty'. we already checked + * if the interrupt is tied to another function. + */ + if (socket->dev->device != func->device) + goto out; + slot2 = pci_get_drvdata(func); if (!slot2) goto out; @@ -791,16 +826,6 @@ static int ti12xx_override(struct yenta_socket *socket) config_writel(socket, TI113X_SYSTEM_CONTROL, val); /* - * for EnE bridges only: clear testbit TLTEnable. this makes the - * RME Hammerfall DSP sound card working. - */ - if (socket->dev->vendor == PCI_VENDOR_ID_ENE) { - u8 test_c9 = config_readb(socket, ENE_TEST_C9); - test_c9 &= ~ENE_TEST_C9_TLTENABLE; - config_writeb(socket, ENE_TEST_C9, test_c9); - } - - /* * Yenta expects controllers to use CSCINT to route * CSC interrupts to PCI rather than INTVAL. */ @@ -841,5 +866,75 @@ static int ti1250_override(struct yenta_socket *socket) return ti12xx_override(socket); } + +/** + * EnE specific part. EnE bridges are register compatible with TI bridges but + * have their own test registers and more important their own little problems. + * Some fixup code to make everybody happy (TM). + */ + +/** + * set/clear various test bits: + * Defaults to clear the bit. + * - mask (u8) defines what bits to change + * - bits (u8) is the values to change them to + * -> it's + * current = (current & ~mask) | bits + */ +/* pci ids of devices that wants to have the bit set */ +#define DEVID(_vend,_dev,_subvend,_subdev,mask,bits) { \ + .vendor = _vend, \ + .device = _dev, \ + .subvendor = _subvend, \ + .subdevice = _subdev, \ + .driver_data = ((mask) << 8 | (bits)), \ + } +static struct pci_device_id ene_tune_tbl[] = { + /* Echo Audio products based on motorola DSP56301 and DSP56361 */ + DEVID(PCI_VENDOR_ID_MOTOROLA, 0x1801, 0xECC0, PCI_ANY_ID, + ENE_TEST_C9_TLTENABLE | ENE_TEST_C9_PFENABLE, ENE_TEST_C9_TLTENABLE), + DEVID(PCI_VENDOR_ID_MOTOROLA, 0x3410, 0xECC0, PCI_ANY_ID, + ENE_TEST_C9_TLTENABLE | ENE_TEST_C9_PFENABLE, ENE_TEST_C9_TLTENABLE), + + {} +}; + +static void ene_tune_bridge(struct pcmcia_socket *sock, struct pci_bus *bus) +{ + struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket); + struct pci_dev *dev; + struct pci_device_id *id = NULL; + u8 test_c9, old_c9, mask, bits; + + list_for_each_entry(dev, &bus->devices, bus_list) { + id = (struct pci_device_id *) pci_match_id(ene_tune_tbl, dev); + if (id) + break; + } + + test_c9 = old_c9 = config_readb(socket, ENE_TEST_C9); + if (id) { + mask = (id->driver_data >> 8) & 0xFF; + bits = id->driver_data & 0xFF; + + test_c9 = (test_c9 & ~mask) | bits; + } + else + /* default to clear TLTEnable bit, old behaviour */ + test_c9 &= ~ENE_TEST_C9_TLTENABLE; + + printk(KERN_INFO "yenta EnE: chaning testregister 0xC9, %02x -> %02x\n", old_c9, test_c9); + config_writeb(socket, ENE_TEST_C9, test_c9); +} + + +static int ene_override(struct yenta_socket *socket) +{ + /* install tune_bridge() function */ + socket->socket.tune_bridge = ene_tune_bridge; + + return ti1250_override(socket); +} + #endif /* _LINUX_TI113X_H */ |
