1 files changed, 123 insertions, 0 deletions
diff --git a/drivers/pcmcia/sa11xx_base.h b/drivers/pcmcia/sa11xx_base.h
new file mode 100644
index 0000000..7bc2082
--- /dev/null
+++ b/drivers/pcmcia/sa11xx_base.h
@@ -0,0 +1,123 @@
+/*======================================================================
+
+    Device driver for the PCMCIA control functionality of StrongARM
+    SA-1100 microprocessors.
+
+    The contents of this file are subject to the Mozilla Public
+    License Version 1.1 (the "License"); you may not use this file
+    except in compliance with the License. You may obtain a copy of
+    the License at http://www.mozilla.org/MPL/
+
+    Software distributed under the License is distributed on an "AS
+    IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+    implied. See the License for the specific language governing
+    rights and limitations under the License.
+
+    The initial developer of the original code is John G. Dorsey
+    <john+@cs.cmu.edu>.  Portions created by John G. Dorsey are
+    Copyright (C) 1999 John G. Dorsey.  All Rights Reserved.
+
+    Alternatively, the contents of this file may be used under the
+    terms of the GNU Public License version 2 (the "GPL"), in which
+    case the provisions of the GPL are applicable instead of the
+    above.  If you wish to allow the use of your version of this file
+    only under the terms of the GPL and not to allow others to use
+    your version of this file under the MPL, indicate your decision
+    by deleting the provisions above and replace them with the notice
+    and other provisions required by the GPL.  If you do not delete
+    the provisions above, a recipient may use your version of this
+    file under either the MPL or the GPL.
+
+======================================================================*/
+
+#if !defined(_PCMCIA_SA1100_H)
+# define _PCMCIA_SA1100_H
+
+/* SA-1100 PCMCIA Memory and I/O timing
+ * ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+ * The SA-1110 Developer's Manual, section 10.2.5, says the following:
+ *
+ *  "To calculate the recommended BS_xx value for each address space:
+ *   divide the command width time (the greater of twIOWR and twIORD,
+ *   or the greater of twWE and twOE) by processor cycle time; divide
+ *   by 2; divide again by 3 (number of BCLK's per command assertion);
+ *   round up to the next whole number; and subtract 1."
+ */
+
+/* MECR: Expansion Memory Configuration Register
+ * (SA-1100 Developers Manual, p.10-13; SA-1110 Developers Manual, p.10-24)
+ *
+ * MECR layout is:
+ *
+ *   FAST1 BSM1<4:0> BSA1<4:0> BSIO1<4:0> FAST0 BSM0<4:0> BSA0<4:0> BSIO0<4:0>
+ *
+ * (This layout is actually true only for the SA-1110; the FASTn bits are
+ * reserved on the SA-1100.)
+ */
+
+#define MECR_SOCKET_0_SHIFT (0)
+#define MECR_SOCKET_1_SHIFT (16)
+
+#define MECR_BS_MASK        (0x1f)
+#define MECR_FAST_MODE_MASK (0x01)
+
+#define MECR_BSIO_SHIFT (0)
+#define MECR_BSA_SHIFT  (5)
+#define MECR_BSM_SHIFT  (10)
+#define MECR_FAST_SHIFT (15)
+
+#define MECR_SET(mecr, sock, shift, mask, bs) \
+((mecr)=((mecr)&~(((mask)<<(shift))<<\
+                  ((sock)==0?MECR_SOCKET_0_SHIFT:MECR_SOCKET_1_SHIFT)))|\
+        (((bs)<<(shift))<<((sock)==0?MECR_SOCKET_0_SHIFT:MECR_SOCKET_1_SHIFT)))
+
+#define MECR_GET(mecr, sock, shift, mask) \
+((((mecr)>>(((sock)==0)?MECR_SOCKET_0_SHIFT:MECR_SOCKET_1_SHIFT))>>\
+ (shift))&(mask))
+
+#define MECR_BSIO_SET(mecr, sock, bs) \
+MECR_SET((mecr), (sock), MECR_BSIO_SHIFT, MECR_BS_MASK, (bs))
+
+#define MECR_BSIO_GET(mecr, sock) \
+MECR_GET((mecr), (sock), MECR_BSIO_SHIFT, MECR_BS_MASK)
+
+#define MECR_BSA_SET(mecr, sock, bs) \
+MECR_SET((mecr), (sock), MECR_BSA_SHIFT, MECR_BS_MASK, (bs))
+
+#define MECR_BSA_GET(mecr, sock) \
+MECR_GET((mecr), (sock), MECR_BSA_SHIFT, MECR_BS_MASK)
+
+#define MECR_BSM_SET(mecr, sock, bs) \
+MECR_SET((mecr), (sock), MECR_BSM_SHIFT, MECR_BS_MASK, (bs))
+
+#define MECR_BSM_GET(mecr, sock) \
+MECR_GET((mecr), (sock), MECR_BSM_SHIFT, MECR_BS_MASK)
+
+#define MECR_FAST_SET(mecr, sock, fast) \
+MECR_SET((mecr), (sock), MECR_FAST_SHIFT, MECR_FAST_MODE_MASK, (fast))
+
+#define MECR_FAST_GET(mecr, sock) \
+MECR_GET((mecr), (sock), MECR_FAST_SHIFT, MECR_FAST_MODE_MASK)
+
+
+/* This function implements the BS value calculation for setting the MECR
+ * using integer arithmetic:
+ */
+static inline unsigned int sa1100_pcmcia_mecr_bs(unsigned int pcmcia_cycle_ns,
+						 unsigned int cpu_clock_khz){
+  unsigned int t = ((pcmcia_cycle_ns * cpu_clock_khz) / 6) - 1000000;
+  return (t / 1000000) + (((t % 1000000) == 0) ? 0 : 1);
+}
+
+/* This function returns the (approximate) command assertion period, in
+ * nanoseconds, for a given CPU clock frequency and MECR BS value:
+ */
+static inline unsigned int sa1100_pcmcia_cmd_time(unsigned int cpu_clock_khz,
+						  unsigned int pcmcia_mecr_bs){
+  return (((10000000 * 2) / cpu_clock_khz) * (3 * (pcmcia_mecr_bs + 1))) / 10;
+}
+
+
+extern int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr);
+
+#endif  /* !defined(_PCMCIA_SA1100_H) */