summaryrefslogtreecommitdiffstats
path: root/drivers/pci/probe.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/probe.c')
-rw-r--r--drivers/pci/probe.c10
1 files changed, 5 insertions, 5 deletions
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 5e14f5a..38e403d 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -582,7 +582,7 @@ static enum pci_bus_speed agp_speed(int agp3, int agpstat)
index = 1;
else
goto out;
-
+
if (agp3) {
index += 2;
if (index == 5)
@@ -789,7 +789,7 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
}
/* Disable MasterAbortMode during probing to avoid reporting
- of bus errors (in some architectures) */
+ of bus errors (in some architectures) */
pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl);
pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
@@ -1005,7 +1005,7 @@ void set_pcie_hotplug_bridge(struct pci_dev *pdev)
* pci_setup_device - fill in class and map information of a device
* @dev: the device structure to fill
*
- * Initialize the device structure with information about the device's
+ * Initialize the device structure with information about the device's
* vendor,class,memory and IO-space addresses,IRQ lines etc.
* Called at initialisation of the PCI subsystem and by CardBus services.
* Returns 0 on success and negative if unknown type of device (not normal,
@@ -1111,7 +1111,7 @@ int pci_setup_device(struct pci_dev *dev)
goto bad;
/* The PCI-to-PCI bridge spec requires that subtractive
decoding (i.e. transparent) bridge must have programming
- interface code of 0x01. */
+ interface code of 0x01. */
pci_read_irq(dev);
dev->transparent = ((dev->class & 0xff) == 1);
pci_read_bases(dev, 2, PCI_ROM_ADDRESS1);
@@ -1570,7 +1570,7 @@ static void pcie_write_mrrs(struct pci_dev *dev)
* subsequent read will verify if the value is acceptable or not.
* If the MRRS value provided is not acceptable (e.g., too large),
* shrink the value until it is acceptable to the HW.
- */
+ */
while (mrrs != pcie_get_readrq(dev) && mrrs >= 128) {
rc = pcie_set_readrq(dev, mrrs);
if (!rc)
OpenPOWER on IntegriCloud