summaryrefslogtreecommitdiffstats
path: root/drivers/pci/pcie/pme.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/pcie/pme.c')
-rw-r--r--drivers/pci/pcie/pme.c31
1 files changed, 6 insertions, 25 deletions
diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c
index 2f3c904..0057344 100644
--- a/drivers/pci/pcie/pme.c
+++ b/drivers/pci/pcie/pme.c
@@ -26,9 +26,6 @@
#include "../pci.h"
#include "portdrv.h"
-#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */
-#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */
-
/*
* If this switch is set, MSI will not be used for PCIe PME signaling. This
* causes the PCIe port driver to use INTx interrupts only, but it turns out
@@ -74,22 +71,6 @@ void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable)
}
/**
- * pcie_pme_clear_status - Clear root port PME interrupt status.
- * @dev: PCIe root port or event collector.
- */
-static void pcie_pme_clear_status(struct pci_dev *dev)
-{
- int rtsta_pos;
- u32 rtsta;
-
- rtsta_pos = pci_pcie_cap(dev) + PCI_EXP_RTSTA;
-
- pci_read_config_dword(dev, rtsta_pos, &rtsta);
- rtsta |= PCI_EXP_RTSTA_PME;
- pci_write_config_dword(dev, rtsta_pos, rtsta);
-}
-
-/**
* pcie_pme_walk_bus - Scan a PCI bus for devices asserting PME#.
* @bus: PCI bus to scan.
*
@@ -103,8 +84,8 @@ static bool pcie_pme_walk_bus(struct pci_bus *bus)
list_for_each_entry(dev, &bus->devices, bus_list) {
/* Skip PCIe devices in case we started from a root port. */
if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) {
- pm_request_resume(&dev->dev);
pci_wakeup_event(dev);
+ pm_request_resume(&dev->dev);
ret = true;
}
@@ -206,8 +187,8 @@ static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id)
/* The device is there, but we have to check its PME status. */
found = pci_check_pme_status(dev);
if (found) {
- pm_request_resume(&dev->dev);
pci_wakeup_event(dev);
+ pm_request_resume(&dev->dev);
}
pci_dev_put(dev);
} else if (devfn) {
@@ -253,7 +234,7 @@ static void pcie_pme_work_fn(struct work_struct *work)
* Clear PME status of the port. If there are other
* pending PMEs, the status will be set again.
*/
- pcie_pme_clear_status(port);
+ pcie_clear_root_pme_status(port);
spin_unlock_irq(&data->lock);
pcie_pme_handle_request(port, rtsta & 0xffff);
@@ -378,7 +359,7 @@ static int pcie_pme_probe(struct pcie_device *srv)
port = srv->port;
pcie_pme_interrupt_enable(port, false);
- pcie_pme_clear_status(port);
+ pcie_clear_root_pme_status(port);
ret = request_irq(srv->irq, pcie_pme_irq, IRQF_SHARED, "PCIe PME", srv);
if (ret) {
@@ -402,7 +383,7 @@ static int pcie_pme_suspend(struct pcie_device *srv)
spin_lock_irq(&data->lock);
pcie_pme_interrupt_enable(port, false);
- pcie_pme_clear_status(port);
+ pcie_clear_root_pme_status(port);
data->noirq = true;
spin_unlock_irq(&data->lock);
@@ -422,7 +403,7 @@ static int pcie_pme_resume(struct pcie_device *srv)
spin_lock_irq(&data->lock);
data->noirq = false;
- pcie_pme_clear_status(port);
+ pcie_clear_root_pme_status(port);
pcie_pme_interrupt_enable(port, true);
spin_unlock_irq(&data->lock);
OpenPOWER on IntegriCloud