diff options
Diffstat (limited to 'drivers/pci/pci.c')
| -rw-r--r-- | drivers/pci/pci.c | 128 |
1 files changed, 109 insertions, 19 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 1b34fc5..259d247 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -222,6 +222,37 @@ pci_find_parent_resource(const struct pci_dev *dev, struct resource *res) } /** + * pci_restore_bars - restore a devices BAR values (e.g. after wake-up) + * @dev: PCI device to have its BARs restored + * + * Restore the BAR values for a given device, so as to make it + * accessible by its driver. + */ +void +pci_restore_bars(struct pci_dev *dev) +{ + int i, numres; + + switch (dev->hdr_type) { + case PCI_HEADER_TYPE_NORMAL: + numres = 6; + break; + case PCI_HEADER_TYPE_BRIDGE: + numres = 2; + break; + case PCI_HEADER_TYPE_CARDBUS: + numres = 1; + break; + default: + /* Should never get here, but just in case... */ + return; + } + + for (i = 0; i < numres; i ++) + pci_update_resource(dev, &dev->resource[i], i); +} + +/** * pci_set_power_state - Set the power state of a PCI device * @dev: PCI device to be suspended * @state: PCI power state (D0, D1, D2, D3hot, D3cold) we're entering @@ -239,7 +270,7 @@ int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t); int pci_set_power_state(struct pci_dev *dev, pci_power_t state) { - int pm; + int pm, need_restore = 0; u16 pmcsr, pmc; /* bound the state we're entering */ @@ -263,7 +294,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) return -EIO; pci_read_config_word(dev,pm + PCI_PM_PMC,&pmc); - if ((pmc & PCI_PM_CAP_VER_MASK) > 2) { + if ((pmc & PCI_PM_CAP_VER_MASK) > 3) { printk(KERN_DEBUG "PCI: %s has unsupported PM cap regs version (%u)\n", pci_name(dev), pmc & PCI_PM_CAP_VER_MASK); @@ -271,23 +302,32 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) } /* check if this device supports the desired state */ - if (state == PCI_D1 || state == PCI_D2) { - if (state == PCI_D1 && !(pmc & PCI_PM_CAP_D1)) - return -EIO; - else if (state == PCI_D2 && !(pmc & PCI_PM_CAP_D2)) - return -EIO; - } + if (state == PCI_D1 && !(pmc & PCI_PM_CAP_D1)) + return -EIO; + else if (state == PCI_D2 && !(pmc & PCI_PM_CAP_D2)) + return -EIO; - /* If we're in D3, force entire word to 0. + pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); + + /* If we're (effectively) in D3, force entire word to 0. * This doesn't affect PME_Status, disables PME_En, and * sets PowerState to 0. */ - if (dev->current_state >= PCI_D3hot) + switch (dev->current_state) { + case PCI_UNKNOWN: /* Boot-up */ + if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot + && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) + need_restore = 1; + /* Fall-through: force to D0 */ + case PCI_D3hot: + case PCI_D3cold: + case PCI_POWER_ERROR: pmcsr = 0; - else { - pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); + break; + default: pmcsr &= ~PCI_PM_CTRL_STATE_MASK; pmcsr |= state; + break; } /* enter specified state */ @@ -308,6 +348,22 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) platform_pci_set_power_state(dev, state); dev->current_state = state; + + /* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT + * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning + * from D3hot to D0 _may_ perform an internal reset, thereby + * going to "D0 Uninitialized" rather than "D0 Initialized". + * For example, at least some versions of the 3c905B and the + * 3c556B exhibit this behaviour. + * + * At least some laptop BIOSen (e.g. the Thinkpad T21) leave + * devices in a D3hot state at boot. Consequently, we need to + * restore at least the BARs so that the device will be + * accessible to its driver. + */ + if (need_restore) + pci_restore_bars(dev); + return 0; } @@ -333,13 +389,17 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state) if (platform_pci_choose_state) { ret = platform_pci_choose_state(dev, state); if (ret >= 0) - state = ret; + state.event = ret; } - switch (state) { - case 0: return PCI_D0; - case 3: return PCI_D3hot; + + switch (state.event) { + case PM_EVENT_ON: + return PCI_D0; + case PM_EVENT_FREEZE: + case PM_EVENT_SUSPEND: + return PCI_D3hot; default: - printk("They asked me for state %d\n", state); + printk("They asked me for state %d\n", state.event); BUG(); } return PCI_D0; @@ -390,8 +450,11 @@ pci_enable_device_bars(struct pci_dev *dev, int bars) { int err; - pci_set_power_state(dev, PCI_D0); - if ((err = pcibios_enable_device(dev, bars)) < 0) + err = pci_set_power_state(dev, PCI_D0); + if (err < 0 && err != -EIO) + return err; + err = pcibios_enable_device(dev, bars); + if (err < 0) return err; return 0; } @@ -743,6 +806,31 @@ pci_clear_mwi(struct pci_dev *dev) } } +/** + * pci_intx - enables/disables PCI INTx for device dev + * @dev: the PCI device to operate on + * @enable: boolean + * + * Enables/disables PCI INTx for device dev + */ +void +pci_intx(struct pci_dev *pdev, int enable) +{ + u16 pci_command, new; + + pci_read_config_word(pdev, PCI_COMMAND, &pci_command); + + if (enable) { + new = pci_command & ~PCI_COMMAND_INTX_DISABLE; + } else { + new = pci_command | PCI_COMMAND_INTX_DISABLE; + } + + if (new != pci_command) { + pci_write_config_word(pdev, PCI_COMMAND, new); + } +} + #ifndef HAVE_ARCH_PCI_SET_DMA_MASK /* * These can be overridden by arch-specific implementations @@ -805,6 +893,7 @@ struct pci_dev *isa_bridge; EXPORT_SYMBOL(isa_bridge); #endif +EXPORT_SYMBOL_GPL(pci_restore_bars); EXPORT_SYMBOL(pci_enable_device_bars); EXPORT_SYMBOL(pci_enable_device); EXPORT_SYMBOL(pci_disable_device); @@ -819,6 +908,7 @@ EXPORT_SYMBOL(pci_request_region); EXPORT_SYMBOL(pci_set_master); EXPORT_SYMBOL(pci_set_mwi); EXPORT_SYMBOL(pci_clear_mwi); +EXPORT_SYMBOL_GPL(pci_intx); EXPORT_SYMBOL(pci_set_dma_mask); EXPORT_SYMBOL(pci_set_consistent_dma_mask); EXPORT_SYMBOL(pci_assign_resource); |
