diff options
Diffstat (limited to 'drivers/pci/pci.c')
| -rw-r--r-- | drivers/pci/pci.c | 209 |
1 files changed, 138 insertions, 71 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 6edecff..315fea4 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -29,7 +29,17 @@ const char *pci_power_names[] = { }; EXPORT_SYMBOL_GPL(pci_power_names); -unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT; +unsigned int pci_pm_d3_delay; + +static void pci_dev_d3_sleep(struct pci_dev *dev) +{ + unsigned int delay = dev->d3_delay; + + if (delay < pci_pm_d3_delay) + delay = pci_pm_d3_delay; + + msleep(delay); +} #ifdef CONFIG_PCI_DOMAINS int pci_domains_supported = 1; @@ -47,6 +57,15 @@ unsigned long pci_cardbus_mem_size = DEFAULT_CARDBUS_MEM_SIZE; unsigned long pci_hotplug_io_size = DEFAULT_HOTPLUG_IO_SIZE; unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE; +/* + * The default CLS is used if arch didn't set CLS explicitly and not + * all pci devices agree on the same value. Arch can override either + * the dfl or actual value as it sees fit. Don't forget this is + * measured in 32-bit words, not bytes. + */ +u8 pci_dfl_cache_line_size __devinitdata = L1_CACHE_BYTES >> 2; +u8 pci_cache_line_size; + /** * pci_bus_max_busnr - returns maximum PCI bus number of given bus' children * @bus: pointer to PCI bus structure to search @@ -373,8 +392,12 @@ pci_find_parent_resource(const struct pci_dev *dev, struct resource *res) continue; /* Wrong type */ if (!((res->flags ^ r->flags) & IORESOURCE_PREFETCH)) return r; /* Exact match */ - if ((res->flags & IORESOURCE_PREFETCH) && !(r->flags & IORESOURCE_PREFETCH)) - best = r; /* Approximating prefetchable by non-prefetchable */ + /* We can't insert a non-prefetch resource inside a prefetchable parent .. */ + if (r->flags & IORESOURCE_PREFETCH) + continue; + /* .. but we can put a prefetchable resource inside a non-prefetchable one */ + if (!best) + best = r; } return best; } @@ -509,11 +532,15 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) /* Mandatory power management transition delays */ /* see PCI PM 1.1 5.6.1 table 18 */ if (state == PCI_D3hot || dev->current_state == PCI_D3hot) - msleep(pci_pm_d3_delay); + pci_dev_d3_sleep(dev); else if (state == PCI_D2 || dev->current_state == PCI_D2) udelay(PCI_PM_D2_DELAY); - dev->current_state = state; + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); + dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK); + if (dev->current_state != state && printk_ratelimit()) + dev_info(&dev->dev, "Refused to change power state, " + "currently in D%d\n", dev->current_state); /* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning @@ -724,8 +751,8 @@ static int pci_save_pcie_state(struct pci_dev *dev) u16 *cap; u16 flags; - pos = pci_find_capability(dev, PCI_CAP_ID_EXP); - if (pos <= 0) + pos = pci_pcie_cap(dev); + if (!pos) return 0; save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP); @@ -833,7 +860,7 @@ pci_save_state(struct pci_dev *dev) int i; /* XXX: 100% dword access ok here? */ for (i = 0; i < 16; i++) - pci_read_config_dword(dev, i * 4,&dev->saved_config_space[i]); + pci_read_config_dword(dev, i * 4, &dev->saved_config_space[i]); dev->state_saved = true; if ((i = pci_save_pcie_state(dev)) != 0) return i; @@ -1136,11 +1163,11 @@ pci_disable_device(struct pci_dev *dev) /** * pcibios_set_pcie_reset_state - set reset state for device dev - * @dev: the PCI-E device reset + * @dev: the PCIe device reset * @state: Reset state to enter into * * - * Sets the PCI-E reset state for the device. This is the default + * Sets the PCIe reset state for the device. This is the default * implementation. Architecture implementations can override this. */ int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev, @@ -1151,7 +1178,7 @@ int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev, /** * pci_set_pcie_reset_state - set reset state for device dev - * @dev: the PCI-E device reset + * @dev: the PCIe device reset * @state: Reset state to enter into * * @@ -1198,7 +1225,7 @@ void pci_pme_active(struct pci_dev *dev, bool enable) pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); - dev_printk(KERN_INFO, &dev->dev, "PME# %s\n", + dev_printk(KERN_DEBUG, &dev->dev, "PME# %s\n", enable ? "enabled" : "disabled"); } @@ -1392,6 +1419,7 @@ void pci_pm_init(struct pci_dev *dev) } dev->pm_cap = pm; + dev->d3_delay = PCI_PM_D3_WAIT; dev->d1_support = false; dev->d2_support = false; @@ -1409,7 +1437,8 @@ void pci_pm_init(struct pci_dev *dev) pmc &= PCI_PM_CAP_PME_MASK; if (pmc) { - dev_info(&dev->dev, "PME# supported from%s%s%s%s%s\n", + dev_printk(KERN_DEBUG, &dev->dev, + "PME# supported from%s%s%s%s%s\n", (pmc & PCI_PM_CAP_PME_D0) ? " D0" : "", (pmc & PCI_PM_CAP_PME_D1) ? " D1" : "", (pmc & PCI_PM_CAP_PME_D2) ? " D2" : "", @@ -1506,7 +1535,7 @@ void pci_enable_ari(struct pci_dev *dev) u16 ctrl; struct pci_dev *bridge; - if (!dev->is_pcie || dev->devfn) + if (!pci_is_pcie(dev) || dev->devfn) return; pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI); @@ -1514,10 +1543,10 @@ void pci_enable_ari(struct pci_dev *dev) return; bridge = dev->bus->self; - if (!bridge || !bridge->is_pcie) + if (!bridge || !pci_is_pcie(bridge)) return; - pos = pci_find_capability(bridge, PCI_CAP_ID_EXP); + pos = pci_pcie_cap(bridge); if (!pos) return; @@ -1532,6 +1561,54 @@ void pci_enable_ari(struct pci_dev *dev) bridge->ari_enabled = 1; } +static int pci_acs_enable; + +/** + * pci_request_acs - ask for ACS to be enabled if supported + */ +void pci_request_acs(void) +{ + pci_acs_enable = 1; +} + +/** + * pci_enable_acs - enable ACS if hardware support it + * @dev: the PCI device + */ +void pci_enable_acs(struct pci_dev *dev) +{ + int pos; + u16 cap; + u16 ctrl; + + if (!pci_acs_enable) + return; + + if (!pci_is_pcie(dev)) + return; + + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS); + if (!pos) + return; + + pci_read_config_word(dev, pos + PCI_ACS_CAP, &cap); + pci_read_config_word(dev, pos + PCI_ACS_CTRL, &ctrl); + + /* Source Validation */ + ctrl |= (cap & PCI_ACS_SV); + + /* P2P Request Redirect */ + ctrl |= (cap & PCI_ACS_RR); + + /* P2P Completion Redirect */ + ctrl |= (cap & PCI_ACS_CR); + + /* Upstream Forwarding */ + ctrl |= (cap & PCI_ACS_UF); + + pci_write_config_word(dev, pos + PCI_ACS_CTRL, ctrl); +} + /** * pci_swizzle_interrupt_pin - swizzle INTx for device behind bridge * @dev: the PCI device @@ -1665,9 +1742,7 @@ static int __pci_request_region(struct pci_dev *pdev, int bar, const char *res_n return 0; err_out: - dev_warn(&pdev->dev, "BAR %d: can't reserve %s region %pR\n", - bar, - pci_resource_flags(pdev, bar) & IORESOURCE_IO ? "I/O" : "mem", + dev_warn(&pdev->dev, "BAR %d: can't reserve %pR\n", bar, &pdev->resource[bar]); return -EBUSY; } @@ -1862,31 +1937,6 @@ void pci_clear_master(struct pci_dev *dev) __pci_set_master(dev, false); } -#ifdef PCI_DISABLE_MWI -int pci_set_mwi(struct pci_dev *dev) -{ - return 0; -} - -int pci_try_set_mwi(struct pci_dev *dev) -{ - return 0; -} - -void pci_clear_mwi(struct pci_dev *dev) -{ -} - -#else - -#ifndef PCI_CACHE_LINE_BYTES -#define PCI_CACHE_LINE_BYTES L1_CACHE_BYTES -#endif - -/* This can be overridden by arch code. */ -/* Don't forget this is measured in 32-bit words, not bytes */ -u8 pci_cache_line_size = PCI_CACHE_LINE_BYTES / 4; - /** * pci_set_cacheline_size - ensure the CACHE_LINE_SIZE register is programmed * @dev: the PCI device for which MWI is to be enabled @@ -1897,13 +1947,12 @@ u8 pci_cache_line_size = PCI_CACHE_LINE_BYTES / 4; * * RETURNS: An appropriate -ERRNO error value on error, or zero for success. */ -static int -pci_set_cacheline_size(struct pci_dev *dev) +int pci_set_cacheline_size(struct pci_dev *dev) { u8 cacheline_size; if (!pci_cache_line_size) - return -EINVAL; /* The system doesn't support MWI. */ + return -EINVAL; /* Validate current setting: the PCI_CACHE_LINE_SIZE must be equal to or multiple of the right value. */ @@ -1924,6 +1973,24 @@ pci_set_cacheline_size(struct pci_dev *dev) return -EINVAL; } +EXPORT_SYMBOL_GPL(pci_set_cacheline_size); + +#ifdef PCI_DISABLE_MWI +int pci_set_mwi(struct pci_dev *dev) +{ + return 0; +} + +int pci_try_set_mwi(struct pci_dev *dev) +{ + return 0; +} + +void pci_clear_mwi(struct pci_dev *dev) +{ +} + +#else /** * pci_set_mwi - enables memory-write-invalidate PCI transaction @@ -2058,6 +2125,7 @@ pci_set_dma_mask(struct pci_dev *dev, u64 mask) return -EIO; dev->dma_mask = mask; + dev_dbg(&dev->dev, "using %dbit DMA mask\n", fls64(mask)); return 0; } @@ -2069,6 +2137,7 @@ pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask) return -EIO; dev->dev.coherent_dma_mask = mask; + dev_dbg(&dev->dev, "using %dbit consistent DMA mask\n", fls64(mask)); return 0; } @@ -2095,9 +2164,9 @@ static int pcie_flr(struct pci_dev *dev, int probe) int i; int pos; u32 cap; - u16 status; + u16 status, control; - pos = pci_find_capability(dev, PCI_CAP_ID_EXP); + pos = pci_pcie_cap(dev); if (!pos) return -ENOTTY; @@ -2122,8 +2191,10 @@ static int pcie_flr(struct pci_dev *dev, int probe) "proceeding with reset anyway\n"); clear: - pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, - PCI_EXP_DEVCTL_BCR_FLR); + pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &control); + control |= PCI_EXP_DEVCTL_BCR_FLR; + pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, control); + msleep(100); return 0; @@ -2187,12 +2258,12 @@ static int pci_pm_reset(struct pci_dev *dev, int probe) csr &= ~PCI_PM_CTRL_STATE_MASK; csr |= PCI_D3hot; pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr); - msleep(pci_pm_d3_delay); + pci_dev_d3_sleep(dev); csr &= ~PCI_PM_CTRL_STATE_MASK; csr |= PCI_D0; pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr); - msleep(pci_pm_d3_delay); + pci_dev_d3_sleep(dev); return 0; } @@ -2236,6 +2307,10 @@ static int pci_dev_reset(struct pci_dev *dev, int probe) down(&dev->dev.sem); } + rc = pci_dev_specific_reset(dev, probe); + if (rc != -ENOTTY) + goto done; + rc = pcie_flr(dev, probe); if (rc != -ENOTTY) goto done; @@ -2446,7 +2521,7 @@ int pcie_get_readrq(struct pci_dev *dev) int ret, cap; u16 ctl; - cap = pci_find_capability(dev, PCI_CAP_ID_EXP); + cap = pci_pcie_cap(dev); if (!cap) return -EINVAL; @@ -2476,7 +2551,7 @@ int pcie_set_readrq(struct pci_dev *dev, int rq) v = (ffs(rq) - 8) << 12; - cap = pci_find_capability(dev, PCI_CAP_ID_EXP); + cap = pci_pcie_cap(dev); if (!cap) goto out; @@ -2536,16 +2611,16 @@ int pci_resource_bar(struct pci_dev *dev, int resno, enum pci_bar_type *type) return reg; } - dev_err(&dev->dev, "BAR: invalid resource #%d\n", resno); + dev_err(&dev->dev, "BAR %d: invalid resource\n", resno); return 0; } /** * pci_set_vga_state - set VGA decode state on device and parents if requested - * @dev the PCI device - * @decode - true = enable decoding, false = disable decoding - * @command_bits PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY - * @change_bridge - traverse ancestors and change bridges + * @dev: the PCI device + * @decode: true = enable decoding, false = disable decoding + * @command_bits: PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY + * @change_bridge: traverse ancestors and change bridges */ int pci_set_vga_state(struct pci_dev *dev, bool decode, unsigned int command_bits, bool change_bridge) @@ -2586,7 +2661,7 @@ int pci_set_vga_state(struct pci_dev *dev, bool decode, #define RESOURCE_ALIGNMENT_PARAM_SIZE COMMAND_LINE_SIZE static char resource_alignment_param[RESOURCE_ALIGNMENT_PARAM_SIZE] = {0}; -spinlock_t resource_alignment_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(resource_alignment_lock); /** * pci_specified_resource_alignment - get resource alignment specified by user. @@ -2719,16 +2794,10 @@ int __attribute__ ((weak)) pci_ext_cfg_avail(struct pci_dev *dev) return 1; } -static int __devinit pci_init(void) +void __weak pci_fixup_cardbus(struct pci_bus *bus) { - struct pci_dev *dev = NULL; - - while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { - pci_fixup_device(pci_fixup_final, dev); - } - - return 0; } +EXPORT_SYMBOL(pci_fixup_cardbus); static int __init pci_setup(char *str) { @@ -2767,8 +2836,6 @@ static int __init pci_setup(char *str) } early_param("pci", pci_setup); -device_initcall(pci_init); - EXPORT_SYMBOL(pci_reenable_device); EXPORT_SYMBOL(pci_enable_device_io); EXPORT_SYMBOL(pci_enable_device_mem); |
