1 files changed, 85 insertions, 4 deletions

diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c
index 4f5b871..2cc3f70 100644
--- a/drivers/pci/intr_remapping.c
+++ b/drivers/pci/intr_remapping.c
@@ -2,6 +2,7 @@
 #include <linux/dmar.h>
 #include <linux/spinlock.h>
 #include <linux/jiffies.h>
+#include <linux/hpet.h>
 #include <linux/pci.h>
 #include <linux/irq.h>
 #include <asm/io_apic.h>
@@ -14,7 +15,8 @@
 #include "pci.h"
 
 static struct ioapic_scope ir_ioapic[MAX_IO_APICS];
-static int ir_ioapic_num;
+static struct hpet_scope ir_hpet[MAX_HPET_TBS];
+static int ir_ioapic_num, ir_hpet_num;
 int intr_remapping_enabled;
 
 static int disable_intremap;
@@ -351,6 +353,16 @@ int flush_irte(int irq)
 	return rc;
 }
 
+struct intel_iommu *map_hpet_to_ir(u8 hpet_id)
+{
+	int i;
+
+	for (i = 0; i < MAX_HPET_TBS; i++)
+		if (ir_hpet[i].id == hpet_id)
+			return ir_hpet[i].iommu;
+	return NULL;
+}
+
 struct intel_iommu *map_ioapic_to_ir(int apic)
 {
 	int i;
@@ -478,6 +490,36 @@ int set_ioapic_sid(struct irte *irte, int apic)
 	return 0;
 }
 
+int set_hpet_sid(struct irte *irte, u8 id)
+{
+	int i;
+	u16 sid = 0;
+
+	if (!irte)
+		return -1;
+
+	for (i = 0; i < MAX_HPET_TBS; i++) {
+		if (ir_hpet[i].id == id) {
+			sid = (ir_hpet[i].bus << 8) | ir_hpet[i].devfn;
+			break;
+		}
+	}
+
+	if (sid == 0) {
+		pr_warning("Failed to set source-id of HPET block (%d)\n", id);
+		return -1;
+	}
+
+	/*
+	 * Should really use SQ_ALL_16. Some platforms are broken.
+	 * While we figure out the right quirks for these broken platforms, use
+	 * SQ_13_IGNORE_3 for now.
+	 */
+	set_irte_sid(irte, SVT_VERIFY_SID_SQ, SQ_13_IGNORE_3, sid);
+
+	return 0;
+}
+
 int set_msi_sid(struct irte *irte, struct pci_dev *dev)
 {
 	struct pci_dev *bridge;
@@ -711,6 +753,34 @@ error:
 	return -1;
 }
 
+static void ir_parse_one_hpet_scope(struct acpi_dmar_device_scope *scope,
+				      struct intel_iommu *iommu)
+{
+	struct acpi_dmar_pci_path *path;
+	u8 bus;
+	int count;
+
+	bus = scope->bus;
+	path = (struct acpi_dmar_pci_path *)(scope + 1);
+	count = (scope->length - sizeof(struct acpi_dmar_device_scope))
+		/ sizeof(struct acpi_dmar_pci_path);
+
+	while (--count > 0) {
+		/*
+		 * Access PCI directly due to the PCI
+		 * subsystem isn't initialized yet.
+		 */
+		bus = read_pci_config_byte(bus, path->dev, path->fn,
+					   PCI_SECONDARY_BUS);
+		path++;
+	}
+	ir_hpet[ir_hpet_num].bus   = bus;
+	ir_hpet[ir_hpet_num].devfn = PCI_DEVFN(path->dev, path->fn);
+	ir_hpet[ir_hpet_num].iommu = iommu;
+	ir_hpet[ir_hpet_num].id    = scope->enumeration_id;
+	ir_hpet_num++;
+}
+
 static void ir_parse_one_ioapic_scope(struct acpi_dmar_device_scope *scope,
 				      struct intel_iommu *iommu)
 {
@@ -740,8 +810,8 @@ static void ir_parse_one_ioapic_scope(struct acpi_dmar_device_scope *scope,
 	ir_ioapic_num++;
 }
 
-static int ir_parse_ioapic_scope(struct acpi_dmar_header *header,
-				 struct intel_iommu *iommu)
+static int ir_parse_ioapic_hpet_scope(struct acpi_dmar_header *header,
+				      struct intel_iommu *iommu)
 {
 	struct acpi_dmar_hardware_unit *drhd;
 	struct acpi_dmar_device_scope *scope;
@@ -765,6 +835,17 @@ static int ir_parse_ioapic_scope(struct acpi_dmar_header *header,
 			       drhd->address);
 
 			ir_parse_one_ioapic_scope(scope, iommu);
+		} else if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_HPET) {
+			if (ir_hpet_num == MAX_HPET_TBS) {
+				printk(KERN_WARNING "Exceeded Max HPET blocks\n");
+				return -1;
+			}
+
+			printk(KERN_INFO "HPET id %d under DRHD base"
+			       " 0x%Lx\n", scope->enumeration_id,
+			       drhd->address);
+
+			ir_parse_one_hpet_scope(scope, iommu);
 		}
 		start += scope->length;
 	}
@@ -785,7 +866,7 @@ int __init parse_ioapics_under_ir(void)
 		struct intel_iommu *iommu = drhd->iommu;
 
 		if (ecap_ir_support(iommu->ecap)) {
-			if (ir_parse_ioapic_scope(drhd->hdr, iommu))
+			if (ir_parse_ioapic_hpet_scope(drhd->hdr, iommu))
 				return -1;
 
 			ir_supported = 1;