summaryrefslogtreecommitdiffstats
path: root/drivers/parisc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/parisc')
-rw-r--r--drivers/parisc/Kconfig33
-rw-r--r--drivers/parisc/dino.c4
-rw-r--r--drivers/parisc/eisa.c2
-rw-r--r--drivers/parisc/gsc.c8
-rw-r--r--drivers/parisc/iosapic.c2
-rw-r--r--drivers/parisc/pdc_stable.c223
-rw-r--r--drivers/parisc/sba_iommu.c17
-rw-r--r--drivers/parisc/superio.c2
8 files changed, 246 insertions, 45 deletions
diff --git a/drivers/parisc/Kconfig b/drivers/parisc/Kconfig
index 3f5de86..1d3b84b 100644
--- a/drivers/parisc/Kconfig
+++ b/drivers/parisc/Kconfig
@@ -140,18 +140,37 @@ config CHASSIS_LCD_LED
If unsure, say Y.
config PDC_CHASSIS
- bool "PDC chassis State Panel support"
+ bool "PDC chassis state codes support"
default y
help
- Say Y here if you want to enable support for the LED State front
- panel as found on E class, and support for the GSP Virtual Front
- Panel (LED State and message logging) as found on high end
- servers such as A, L and N-class.
-
- This has nothing to do with Chassis LCD and LED support.
+ Say Y here if you want to enable support for Chassis codes.
+ That includes support for LED State front panel as found on E
+ class, and support for the GSP Virtual Front Panel (LED State and
+ message logging) as found on high end servers such as A, L and
+ N-class.
+ This driver will also display progress messages on LCD display,
+ such as "INI", "RUN" and "FLT", and might thus clobber messages
+ shown by the LED/LCD driver.
+ This driver updates the state panel (LED and/or LCD) upon system
+ state change (eg: boot, shutdown or panic).
If unsure, say Y.
+
+config PDC_CHASSIS_WARN
+ bool "PDC chassis warnings support"
+ depends on PROC_FS
+ default y
+ help
+ Say Y here if you want to enable support for Chassis warnings.
+ This will add a proc entry '/proc/chassis' giving some information
+ about the overall health state of the system.
+ This includes NVRAM battery level, overtemp or failures such as
+ fans or power units.
+
+ If unsure, say Y.
+
+
config PDC_STABLE
tristate "PDC Stable Storage support"
depends on SYSFS
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index 6e8ed0c..ce0a6eb 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -299,7 +299,7 @@ struct pci_port_ops dino_port_ops = {
static void dino_disable_irq(unsigned int irq)
{
- struct dino_device *dino_dev = irq_desc[irq].handler_data;
+ struct dino_device *dino_dev = irq_desc[irq].chip_data;
int local_irq = gsc_find_local_irq(irq, dino_dev->global_irq, DINO_LOCAL_IRQS);
DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, dino_dev, irq);
@@ -311,7 +311,7 @@ static void dino_disable_irq(unsigned int irq)
static void dino_enable_irq(unsigned int irq)
{
- struct dino_device *dino_dev = irq_desc[irq].handler_data;
+ struct dino_device *dino_dev = irq_desc[irq].chip_data;
int local_irq = gsc_find_local_irq(irq, dino_dev->global_irq, DINO_LOCAL_IRQS);
u32 tmp;
diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c
index 9d3bd15..58f0ce8 100644
--- a/drivers/parisc/eisa.c
+++ b/drivers/parisc/eisa.c
@@ -350,7 +350,7 @@ static int __devinit eisa_probe(struct parisc_device *dev)
irq_desc[2].action = &irq2_action;
for (i = 0; i < 16; i++) {
- irq_desc[i].handler = &eisa_interrupt_type;
+ irq_desc[i].chip = &eisa_interrupt_type;
}
EISA_bus = 1;
diff --git a/drivers/parisc/gsc.c b/drivers/parisc/gsc.c
index 16d40f9..5476ba7 100644
--- a/drivers/parisc/gsc.c
+++ b/drivers/parisc/gsc.c
@@ -109,7 +109,7 @@ int gsc_find_local_irq(unsigned int irq, int *global_irqs, int limit)
static void gsc_asic_disable_irq(unsigned int irq)
{
- struct gsc_asic *irq_dev = irq_desc[irq].handler_data;
+ struct gsc_asic *irq_dev = irq_desc[irq].chip_data;
int local_irq = gsc_find_local_irq(irq, irq_dev->global_irq, 32);
u32 imr;
@@ -124,7 +124,7 @@ static void gsc_asic_disable_irq(unsigned int irq)
static void gsc_asic_enable_irq(unsigned int irq)
{
- struct gsc_asic *irq_dev = irq_desc[irq].handler_data;
+ struct gsc_asic *irq_dev = irq_desc[irq].chip_data;
int local_irq = gsc_find_local_irq(irq, irq_dev->global_irq, 32);
u32 imr;
@@ -164,8 +164,8 @@ int gsc_assign_irq(struct hw_interrupt_type *type, void *data)
if (irq > GSC_IRQ_MAX)
return NO_IRQ;
- irq_desc[irq].handler = type;
- irq_desc[irq].handler_data = data;
+ irq_desc[irq].chip = type;
+ irq_desc[irq].chip_data = data;
return irq++;
}
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
index 7a458d5..1fbda77 100644
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -619,7 +619,7 @@ iosapic_set_irt_data( struct vector_info *vi, u32 *dp0, u32 *dp1)
static struct vector_info *iosapic_get_vector(unsigned int irq)
{
- return irq_desc[irq].handler_data;
+ return irq_desc[irq].chip_data;
}
static void iosapic_disable_irq(unsigned int irq)
diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c
index bbeabe3..ea1b7a6 100644
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -28,8 +28,15 @@
* following code can deal with just 96 bytes of Stable Storage, and all
* sizes between 96 and 192 bytes (provided they are multiple of struct
* device_path size, eg: 128, 160 and 192) to provide full information.
- * The code makes no use of data above 192 bytes. One last word: there's one
- * path we can always count on: the primary path.
+ * One last word: there's one path we can always count on: the primary path.
+ * Anything above 224 bytes is used for 'osdep2' OS-dependent storage area.
+ *
+ * The first OS-dependent area should always be available. Obviously, this is
+ * not true for the other one. Also bear in mind that reading/writing from/to
+ * osdep2 is much more expensive than from/to osdep1.
+ * NOTE: We do not handle the 2 bytes OS-dep area at 0x5D, nor the first
+ * 2 bytes of storage available right after OSID. That's a total of 4 bytes
+ * sacrificed: -ETOOLAZY :P
*
* The current policy wrt file permissions is:
* - write: root only
@@ -64,15 +71,18 @@
#include <asm/uaccess.h>
#include <asm/hardware.h>
-#define PDCS_VERSION "0.22"
+#define PDCS_VERSION "0.30"
#define PDCS_PREFIX "PDC Stable Storage"
#define PDCS_ADDR_PPRI 0x00
#define PDCS_ADDR_OSID 0x40
+#define PDCS_ADDR_OSD1 0x48
+#define PDCS_ADDR_DIAG 0x58
#define PDCS_ADDR_FSIZ 0x5C
#define PDCS_ADDR_PCON 0x60
#define PDCS_ADDR_PALT 0x80
#define PDCS_ADDR_PKBD 0xA0
+#define PDCS_ADDR_OSD2 0xE0
MODULE_AUTHOR("Thibaut VARENE <varenet@parisc-linux.org>");
MODULE_DESCRIPTION("sysfs interface to HP PDC Stable Storage data");
@@ -82,6 +92,9 @@ MODULE_VERSION(PDCS_VERSION);
/* holds Stable Storage size. Initialized once and for all, no lock needed */
static unsigned long pdcs_size __read_mostly;
+/* holds OS ID. Initialized once and for all, hopefully to 0x0006 */
+static u16 pdcs_osid __read_mostly;
+
/* This struct defines what we need to deal with a parisc pdc path entry */
struct pdcspath_entry {
rwlock_t rw_lock; /* to protect path entry access */
@@ -609,27 +622,64 @@ static ssize_t
pdcs_osid_read(struct subsystem *entry, char *buf)
{
char *out = buf;
- __u32 result;
- char *tmpstr = NULL;
if (!entry || !buf)
return -EINVAL;
- /* get OSID */
- if (pdc_stable_read(PDCS_ADDR_OSID, &result, sizeof(result)) != PDC_OK)
+ out += sprintf(out, "%s dependent data (0x%.4x)\n",
+ os_id_to_string(pdcs_osid), pdcs_osid);
+
+ return out - buf;
+}
+
+/**
+ * pdcs_osdep1_read - Stable Storage OS-Dependent data area 1 output.
+ * @entry: An allocated and populated subsytem struct. We don't use it tho.
+ * @buf: The output buffer to write to.
+ *
+ * This can hold 16 bytes of OS-Dependent data.
+ */
+static ssize_t
+pdcs_osdep1_read(struct subsystem *entry, char *buf)
+{
+ char *out = buf;
+ u32 result[4];
+
+ if (!entry || !buf)
+ return -EINVAL;
+
+ if (pdc_stable_read(PDCS_ADDR_OSD1, &result, sizeof(result)) != PDC_OK)
return -EIO;
- /* the actual result is 16 bits away */
- switch (result >> 16) {
- case 0x0000: tmpstr = "No OS-dependent data"; break;
- case 0x0001: tmpstr = "HP-UX dependent data"; break;
- case 0x0002: tmpstr = "MPE-iX dependent data"; break;
- case 0x0003: tmpstr = "OSF dependent data"; break;
- case 0x0004: tmpstr = "HP-RT dependent data"; break;
- case 0x0005: tmpstr = "Novell Netware dependent data"; break;
- default: tmpstr = "Unknown"; break;
- }
- out += sprintf(out, "%s (0x%.4x)\n", tmpstr, (result >> 16));
+ out += sprintf(out, "0x%.8x\n", result[0]);
+ out += sprintf(out, "0x%.8x\n", result[1]);
+ out += sprintf(out, "0x%.8x\n", result[2]);
+ out += sprintf(out, "0x%.8x\n", result[3]);
+
+ return out - buf;
+}
+
+/**
+ * pdcs_diagnostic_read - Stable Storage Diagnostic register output.
+ * @entry: An allocated and populated subsytem struct. We don't use it tho.
+ * @buf: The output buffer to write to.
+ *
+ * I have NFC how to interpret the content of that register ;-).
+ */
+static ssize_t
+pdcs_diagnostic_read(struct subsystem *entry, char *buf)
+{
+ char *out = buf;
+ u32 result;
+
+ if (!entry || !buf)
+ return -EINVAL;
+
+ /* get diagnostic */
+ if (pdc_stable_read(PDCS_ADDR_DIAG, &result, sizeof(result)) != PDC_OK)
+ return -EIO;
+
+ out += sprintf(out, "0x%.4x\n", (result >> 16));
return out - buf;
}
@@ -645,7 +695,7 @@ static ssize_t
pdcs_fastsize_read(struct subsystem *entry, char *buf)
{
char *out = buf;
- __u32 result;
+ u32 result;
if (!entry || !buf)
return -EINVAL;
@@ -664,6 +714,39 @@ pdcs_fastsize_read(struct subsystem *entry, char *buf)
}
/**
+ * pdcs_osdep2_read - Stable Storage OS-Dependent data area 2 output.
+ * @entry: An allocated and populated subsytem struct. We don't use it tho.
+ * @buf: The output buffer to write to.
+ *
+ * This can hold pdcs_size - 224 bytes of OS-Dependent data, when available.
+ */
+static ssize_t
+pdcs_osdep2_read(struct subsystem *entry, char *buf)
+{
+ char *out = buf;
+ unsigned long size;
+ unsigned short i;
+ u32 result;
+
+ if (unlikely(pdcs_size <= 224))
+ return -ENODATA;
+
+ size = pdcs_size - 224;
+
+ if (!entry || !buf)
+ return -EINVAL;
+
+ for (i=0; i<size; i+=4) {
+ if (unlikely(pdc_stable_read(PDCS_ADDR_OSD2 + i, &result,
+ sizeof(result)) != PDC_OK))
+ return -EIO;
+ out += sprintf(out, "0x%.8x\n", result);
+ }
+
+ return out - buf;
+}
+
+/**
* pdcs_auto_write - This function handles autoboot/search flag modifying.
* @entry: An allocated and populated subsytem struct. We don't use it tho.
* @buf: The input buffer to read from.
@@ -770,13 +853,100 @@ pdcs_autosearch_write(struct subsystem *entry, const char *buf, size_t count)
return pdcs_auto_write(entry, buf, count, PF_AUTOSEARCH);
}
+/**
+ * pdcs_osdep1_write - Stable Storage OS-Dependent data area 1 input.
+ * @entry: An allocated and populated subsytem struct. We don't use it tho.
+ * @buf: The input buffer to read from.
+ * @count: The number of bytes to be read.
+ *
+ * This can store 16 bytes of OS-Dependent data. We use a byte-by-byte
+ * write approach. It's up to userspace to deal with it when constructing
+ * its input buffer.
+ */
+static ssize_t
+pdcs_osdep1_write(struct subsystem *entry, const char *buf, size_t count)
+{
+ u8 in[16];
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ if (!entry || !buf || !count)
+ return -EINVAL;
+
+ if (unlikely(pdcs_osid != OS_ID_LINUX))
+ return -EPERM;
+
+ if (count > 16)
+ return -EMSGSIZE;
+
+ /* We'll use a local copy of buf */
+ memset(in, 0, 16);
+ memcpy(in, buf, count);
+
+ if (pdc_stable_write(PDCS_ADDR_OSD1, &in, sizeof(in)) != PDC_OK)
+ return -EIO;
+
+ return count;
+}
+
+/**
+ * pdcs_osdep2_write - Stable Storage OS-Dependent data area 2 input.
+ * @entry: An allocated and populated subsytem struct. We don't use it tho.
+ * @buf: The input buffer to read from.
+ * @count: The number of bytes to be read.
+ *
+ * This can store pdcs_size - 224 bytes of OS-Dependent data. We use a
+ * byte-by-byte write approach. It's up to userspace to deal with it when
+ * constructing its input buffer.
+ */
+static ssize_t
+pdcs_osdep2_write(struct subsystem *entry, const char *buf, size_t count)
+{
+ unsigned long size;
+ unsigned short i;
+ u8 in[4];
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ if (!entry || !buf || !count)
+ return -EINVAL;
+
+ if (unlikely(pdcs_size <= 224))
+ return -ENOSYS;
+
+ if (unlikely(pdcs_osid != OS_ID_LINUX))
+ return -EPERM;
+
+ size = pdcs_size - 224;
+
+ if (count > size)
+ return -EMSGSIZE;
+
+ /* We'll use a local copy of buf */
+
+ for (i=0; i<count; i+=4) {
+ memset(in, 0, 4);
+ memcpy(in, buf+i, (count-i < 4) ? count-i : 4);
+ if (unlikely(pdc_stable_write(PDCS_ADDR_OSD2 + i, &in,
+ sizeof(in)) != PDC_OK))
+ return -EIO;
+ }
+
+ return count;
+}
+
/* The remaining attributes. */
static PDCS_ATTR(size, 0444, pdcs_size_read, NULL);
static PDCS_ATTR(autoboot, 0644, pdcs_autoboot_read, pdcs_autoboot_write);
static PDCS_ATTR(autosearch, 0644, pdcs_autosearch_read, pdcs_autosearch_write);
static PDCS_ATTR(timer, 0444, pdcs_timer_read, NULL);
-static PDCS_ATTR(osid, 0400, pdcs_osid_read, NULL);
+static PDCS_ATTR(osid, 0444, pdcs_osid_read, NULL);
+static PDCS_ATTR(osdep1, 0600, pdcs_osdep1_read, pdcs_osdep1_write);
+static PDCS_ATTR(diagnostic, 0400, pdcs_diagnostic_read, NULL);
static PDCS_ATTR(fastsize, 0400, pdcs_fastsize_read, NULL);
+static PDCS_ATTR(osdep2, 0600, pdcs_osdep2_read, pdcs_osdep2_write);
static struct subsys_attribute *pdcs_subsys_attrs[] = {
&pdcs_attr_size,
@@ -784,7 +954,10 @@ static struct subsys_attribute *pdcs_subsys_attrs[] = {
&pdcs_attr_autosearch,
&pdcs_attr_timer,
&pdcs_attr_osid,
+ &pdcs_attr_osdep1,
+ &pdcs_attr_diagnostic,
&pdcs_attr_fastsize,
+ &pdcs_attr_osdep2,
NULL,
};
@@ -865,6 +1038,7 @@ pdc_stable_init(void)
{
struct subsys_attribute *attr;
int i, rc = 0, error = 0;
+ u32 result;
/* find the size of the stable storage */
if (pdc_stable_get_size(&pdcs_size) != PDC_OK)
@@ -876,6 +1050,13 @@ pdc_stable_init(void)
printk(KERN_INFO PDCS_PREFIX " facility v%s\n", PDCS_VERSION);
+ /* get OSID */
+ if (pdc_stable_read(PDCS_ADDR_OSID, &result, sizeof(result)) != PDC_OK)
+ return -EIO;
+
+ /* the actual result is 16 bits away */
+ pdcs_osid = (u16)(result >> 16);
+
/* For now we'll register the stable subsys within this driver */
if ((rc = firmware_register(&stable_subsys)))
goto fail_firmreg;
@@ -887,7 +1068,7 @@ pdc_stable_init(void)
/* register the paths subsys as a subsystem of stable subsys */
kset_set_kset_s(&paths_subsys, stable_subsys);
- if ((rc= subsystem_register(&paths_subsys)))
+ if ((rc = subsystem_register(&paths_subsys)))
goto fail_subsysreg;
/* now we create all "files" for the paths subsys */
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index 278f325..d09e39e 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -316,10 +316,10 @@ static int reserve_sba_gart = 1;
**
** Superdome (in particular, REO) allows only 64-bit CSR accesses.
*/
-#define READ_REG32(addr) le32_to_cpu(__raw_readl(addr))
-#define READ_REG64(addr) le64_to_cpu(__raw_readq(addr))
-#define WRITE_REG32(val, addr) __raw_writel(cpu_to_le32(val), addr)
-#define WRITE_REG64(val, addr) __raw_writeq(cpu_to_le64(val), addr)
+#define READ_REG32(addr) readl(addr)
+#define READ_REG64(addr) readq(addr)
+#define WRITE_REG32(val, addr) writel((val), (addr))
+#define WRITE_REG64(val, addr) writeq((val), (addr))
#ifdef CONFIG_64BIT
#define READ_REG(addr) READ_REG64(addr)
@@ -1427,7 +1427,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
iov_order = get_order(iova_space_size >> (IOVP_SHIFT - PAGE_SHIFT));
ioc->pdir_size = (iova_space_size / IOVP_SIZE) * sizeof(u64);
- DBG_INIT("%s() hpa 0x%lx IOV %dMB (%d bits)\n",
+ DBG_INIT("%s() hpa 0x%p IOV %dMB (%d bits)\n",
__FUNCTION__, ioc->ioc_hpa, iova_space_size >> 20,
iov_order + PAGE_SHIFT);
@@ -1764,7 +1764,7 @@ printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n", PAGE0->mem_boot.hpa,
sba_dev->num_ioc = num_ioc;
for (i = 0; i < num_ioc; i++) {
- unsigned long ioc_hpa = sba_dev->ioc[i].ioc_hpa;
+ void __iomem *ioc_hpa = sba_dev->ioc[i].ioc_hpa;
unsigned int j;
for (j=0; j < sizeof(u64) * ROPES_PER_IOC; j+=sizeof(u64)) {
@@ -1776,7 +1776,8 @@ printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n", PAGE0->mem_boot.hpa,
* Improves netperf UDP_STREAM by ~10% for bcm5701.
*/
if (IS_PLUTO(sba_dev->iodc)) {
- unsigned long rope_cfg, cfg_val;
+ void __iomem *rope_cfg;
+ unsigned long cfg_val;
rope_cfg = ioc_hpa + IOC_ROPE0_CFG + j;
cfg_val = READ_REG(rope_cfg);
@@ -1902,7 +1903,7 @@ sba_common_init(struct sba_device *sba_dev)
* (bit #61, big endian), we have to flush and sync every time
* IO-PDIR is changed in Ike/Astro.
*/
- if (boot_cpu_data.pdc.capabilities & PDC_MODEL_IOPDIR_FDC) {
+ if (ioc_needs_fdc) {
printk(KERN_INFO MODULE_NAME " FDC/SYNC required.\n");
} else {
printk(KERN_INFO MODULE_NAME " IOC has cache coherent PDIR.\n");
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index 828eb45..a988dc7 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -360,7 +360,7 @@ int superio_fixup_irq(struct pci_dev *pcidev)
#endif
for (i = 0; i < 16; i++) {
- irq_desc[i].handler = &superio_interrupt_type;
+ irq_desc[i].chip = &superio_interrupt_type;
}
/*
OpenPOWER on IntegriCloud